コード例 #1
0
ファイル: debfile.py プロジェクト: antcer1213/edeb
    def check(self):
        """Check if the package is installable."""
        self._dbg(3, "check")

        self._check_was_run = True

        # check arch
        if not "Architecture" in self._sections:
            self._dbg(1, "ERROR: no architecture field")
            self._failure_string = _("No Architecture field in the package")
            return False
        arch = self._sections["Architecture"]
        if  arch != "all" and arch != apt_pkg.config.find("APT::Architecture"):
            if arch in apt_pkg.get_architectures():
                self._multiarch = arch
                self.pkgname = "%s:%s" % (self.pkgname, self._multiarch)
                self._dbg(1, "Found multiarch arch: '%s'" % arch)
            else:
                self._dbg(1, "ERROR: Wrong architecture dude!")
                self._failure_string = _("Wrong architecture '%s'") % arch
                return False

        self._failure_string = ""

        if self._cache._depcache.broken_count > 0:
            self._failure_string = _("Failed to satisfy all dependencies "
                                     "(broken cache)")
            # clean the cache again
            self._cache.clear()
            return False
        return True
コード例 #2
0
    def check(self, allow_downgrade=False):
        """Check if the package is installable."""
        self._dbg(3, "check")

        self._check_was_run = True

        # check arch
        if "Architecture" not in self._sections:
            self._dbg(1, "ERROR: no architecture field")
            self._failure_string = _("No Architecture field in the package")
            return False
        arch = self._sections["Architecture"]
        if arch != "all" and arch != apt_pkg.config.find("APT::Architecture"):
            if arch in apt_pkg.get_architectures():
                self._multiarch = arch
                self.pkgname = "%s:%s" % (self.pkgname, self._multiarch)
                self._dbg(1, "Found multiarch arch: '%s'" % arch)
            else:
                self._dbg(1, "ERROR: Wrong architecture dude!")
                self._failure_string = _("Wrong architecture '%s'") % arch
                return False

        # check version
        if (not allow_downgrade and
            self.compare_to_version_in_cache() == self.VERSION_OUTDATED):
            if self._cache[self.pkgname].installed:
                # the deb is older than the installed
                self._failure_string = _(
                    "A later version is already installed")
                return False

        # FIXME: this sort of error handling sux
        self._failure_string = ""

        # check conflicts
        if not self.check_conflicts():
            return False

        # check if installing it would break anything on the
        # current system
        if not self.check_breaks_existing_packages():
            return False

        # try to satisfy the dependencies
        if not self._satisfy_depends(self.depends):
            return False

        # check for conflicts again (this time with the packages that are
        # makeed for install)
        if not self.check_conflicts():
            return False

        if self._cache._depcache.broken_count > 0:
            self._failure_string = _("Failed to satisfy all dependencies "
                                     "(broken cache)")
            # clean the cache again
            self._cache.clear()
            return False
        return True
コード例 #3
0
ファイル: debfile.py プロジェクト: HannesMann/Smashbuntu
    def check(self, allow_downgrade=False):
        """Check if the package is installable."""
        self._dbg(3, "check")

        self._check_was_run = True

        # check arch
        if "Architecture" not in self._sections:
            self._dbg(1, "ERROR: no architecture field")
            self._failure_string = _("No Architecture field in the package")
            return False
        arch = self._sections["Architecture"]
        if arch != "all" and arch != apt_pkg.config.find("APT::Architecture"):
            if arch in apt_pkg.get_architectures():
                self._multiarch = arch
                self.pkgname = "%s:%s" % (self.pkgname, self._multiarch)
                self._dbg(1, "Found multiarch arch: '%s'" % arch)
            else:
                self._dbg(1, "ERROR: Wrong architecture dude!")
                self._failure_string = _("Wrong architecture '%s'") % arch
                return False

        # check version
        if (not allow_downgrade and
            self.compare_to_version_in_cache() == self.VERSION_OUTDATED):
            if self._cache[self.pkgname].installed:
                # the deb is older than the installed
                self._failure_string = _(
                    "A later version is already installed")
                return False

        # FIXME: this sort of error handling sux
        self._failure_string = ""

        # check conflicts
        if not self.check_conflicts():
            return False

        # check if installing it would break anything on the
        # current system
        if not self.check_breaks_existing_packages():
            return False

        # try to satisfy the dependencies
        if not self._satisfy_depends(self.depends):
            return False

        # check for conflicts again (this time with the packages that are
        # makeed for install)
        if not self.check_conflicts():
            return False

        if self._cache._depcache.broken_count > 0:
            self._failure_string = _("Failed to satisfy all dependencies "
                                     "(broken cache)")
            # clean the cache again
            self._cache.clear()
            return False
        return True
コード例 #4
0
    def get_server_list(self):
        ''' Return a list of used and suggested servers '''
        def compare_mirrors(mir1, mir2):
            ''' Helper function that handles comaprision of mirror urls
                that could contain trailing slashes'''
            return re.match(mir1.strip("/ "), mir2.rstrip("/ "))

        # Store all available servers:
        # Name, URI, active
        mirrors = []
        if (len(self.used_servers) < 1 or
            (len(self.used_servers) == 1
             and compare_mirrors(self.used_servers[0], self.main_server))):
            mirrors.append([_("Main server"), self.main_server, True])
            if self.nearest_server:
                mirrors.append([
                    self._get_mirror_name(self.nearest_server),
                    self.nearest_server, False
                ])
        elif (len(self.used_servers) == 1
              and not compare_mirrors(self.used_servers[0], self.main_server)):
            mirrors.append([_("Main server"), self.main_server, False])
            # Only one server is used
            server = self.used_servers[0]

            # Append the nearest server if it's not already used
            if self.nearest_server:
                if not compare_mirrors(server, self.nearest_server):
                    mirrors.append([
                        self._get_mirror_name(self.nearest_server),
                        self.nearest_server, False
                    ])
            if server:
                mirrors.append([self._get_mirror_name(server), server, True])

        elif len(self.used_servers) > 1:
            # More than one server is used. Since we don't handle this case
            # in the user interface we set "custom servers" to true and
            # append a list of all used servers
            mirrors.append([_("Main server"), self.main_server, False])
            if self.nearest_server:
                mirrors.append([
                    self._get_mirror_name(self.nearest_server),
                    self.nearest_server, False
                ])
            mirrors.append([_("Custom servers"), None, True])
            for server in self.used_servers:
                mirror_entry = [self._get_mirror_name(server), server, False]
                if (compare_mirrors(server, self.nearest_server)
                        or compare_mirrors(server, self.main_server)):
                    continue
                elif not mirror_entry in mirrors:
                    mirrors.append(mirror_entry)

        return mirrors
コード例 #5
0
ファイル: distro.py プロジェクト: cckwesHope/rpi_sysroot
    def get_server_list(self):
        ''' Return a list of used and suggested servers '''

        def compare_mirrors(mir1, mir2):
            ''' Helper function that handles comaprision of mirror urls
                that could contain trailing slashes'''
            return re.match(mir1.strip("/ "), mir2.rstrip("/ "))

        # Store all available servers:
        # Name, URI, active
        mirrors = []
        if (len(self.used_servers) < 1 or
            (len(self.used_servers) == 1 and
             compare_mirrors(self.used_servers[0], self.main_server))):
            mirrors.append([_("Main server"), self.main_server, True])
            if self.nearest_server:
                mirrors.append([self._get_mirror_name(self.nearest_server),
                                self.nearest_server, False])
        elif (len(self.used_servers) == 1 and not
              compare_mirrors(self.used_servers[0], self.main_server)):
            mirrors.append([_("Main server"), self.main_server, False])
            # Only one server is used
            server = self.used_servers[0]

            # Append the nearest server if it's not already used
            if self.nearest_server:
                if not compare_mirrors(server, self.nearest_server):
                    mirrors.append([self._get_mirror_name(self.nearest_server),
                                    self.nearest_server, False])
            if server:
                mirrors.append([self._get_mirror_name(server), server, True])

        elif len(self.used_servers) > 1:
            # More than one server is used. Since we don't handle this case
            # in the user interface we set "custom servers" to true and
            # append a list of all used servers
            mirrors.append([_("Main server"), self.main_server, False])
            if self.nearest_server:
                mirrors.append([self._get_mirror_name(self.nearest_server),
                                self.nearest_server, False])
            mirrors.append([_("Custom servers"), None, True])
            for server in self.used_servers:
                mirror_entry = [self._get_mirror_name(server), server, False]
                if (compare_mirrors(server, self.nearest_server) or
                        compare_mirrors(server, self.main_server)):
                    continue
                elif mirror_entry not in mirrors:
                    mirrors.append(mirror_entry)

        return mirrors
コード例 #6
0
ファイル: debfile.py プロジェクト: signalnine/cr48
 def _get_content(self, part, name, auto_decompress=True, auto_hex=True):
     data = part.get_content(name)
     # check for zip content
     if name.endswith(".gz") and auto_decompress:
         io = StringIO(data)
         gz = gzip.GzipFile(fileobj=io)
         data = _("Automatically decompressed:\n\n")
         data += gz.read()
     # auto-convert to hex
     try:
         data = unicode(data, "utf-8")
     except Exception, e:
         new_data = _("Automatically converted to printable ascii:\n")
         new_data += self.to_strish(data)
         return new_data
コード例 #7
0
 def __init__(self, name, keyid, date):
     # type: (str, str, str) -> None
     self.raw_name = name
     # Allow to translated some known keys
     self.name = _(name)
     self.keyid = keyid
     self.date = date
コード例 #8
0
ファイル: debfile.py プロジェクト: julian-klode/python-apt
    def open(self, file):
        # type: (str) -> None
        """Open the package."""
        depends_tags = ["Build-Depends", "Build-Depends-Indep"]
        conflicts_tags = ["Build-Conflicts", "Build-Conflicts-Indep"]
        fd = apt_pkg.open_maybe_clear_signed_file(file)
        fobj = os.fdopen(fd)
        tagfile = apt_pkg.TagFile(fobj)
        try:
            for sec in tagfile:
                for tag in depends_tags:
                    if tag not in sec:
                        continue
                    self._depends.extend(apt_pkg.parse_src_depends(sec[tag]))
                for tag in conflicts_tags:
                    if tag not in sec:
                        continue
                    self._conflicts.extend(apt_pkg.parse_src_depends(sec[tag]))
                if 'Source' in sec:
                    self.pkgname = sec['Source']
                if 'Binary' in sec:
                    self.binaries = [b.strip() for b in
                                     sec['Binary'].split(',')]
                for tag in sec.keys():      # type: ignore
                    if tag in sec:
                        self._sections[tag] = sec[tag]
        finally:
            del tagfile
            fobj.close()

        s = _("Install Build-Dependencies for "
              "source package '%s' that builds %s\n") % (self.pkgname,
              " ".join(self.binaries))
        self._sections["Description"] = s
        self._check_was_run = False
コード例 #9
0
ファイル: debfile.py プロジェクト: grosskur/python-apt-heroku
 def _check_single_pkg_conflict(self, pkgname, ver, oper):
     """Return True if a pkg conflicts with a real installed/marked pkg."""
     # FIXME: deal with conflicts against its own provides
     #        (e.g. Provides: ftp-server, Conflicts: ftp-server)
     self._dbg(
         3, "_check_single_pkg_conflict() pkg='%s' ver='%s' oper='%s'" % (
             pkgname, ver, oper))
     pkg = self._cache[pkgname]
     if pkg.is_installed:
         pkgver = pkg.installed.version
     elif pkg.marked_install:
         pkgver = pkg.candidate.version
     else:
         return False
     #print "pkg: %s" % pkgname
     #print "ver: %s" % ver
     #print "pkgver: %s " % pkgver
     #print "oper: %s " % oper
     if (apt_pkg.check_dep(pkgver, oper, ver) and not
             self.replaces_real_pkg(pkgname, oper, ver)):
         self._failure_string += _("Conflicts with the installed package "
                                   "'%s'") % pkg.name
         self._dbg(3, "conflicts with installed pkg '%s'" % pkg.name)
         return True
     return False
コード例 #10
0
ファイル: debfile.py プロジェクト: grosskur/python-apt-heroku
    def open(self, file):
        """Open the package."""
        depends_tags = ["Build-Depends", "Build-Depends-Indep"]
        conflicts_tags = ["Build-Conflicts", "Build-Conflicts-Indep"]
        fobj = open(file)
        tagfile = apt_pkg.TagFile(fobj)
        try:
            for sec in tagfile:
                for tag in depends_tags:
                    if tag not in sec:
                        continue
                    self._depends.extend(apt_pkg.parse_src_depends(sec[tag]))
                for tag in conflicts_tags:
                    if tag not in sec:
                        continue
                    self._conflicts.extend(apt_pkg.parse_src_depends(sec[tag]))
                if 'Source' in sec:
                    self.pkgname = sec['Source']
                if 'Binary' in sec:
                    self.binaries = sec['Binary'].split(', ')
                if 'Version' in sec:
                    self._sections['Version'] = sec['Version']
        finally:
            del tagfile
            fobj.close()

        s = _("Install Build-Dependencies for "
              "source package '%s' that builds %s\n") % (self.pkgname,
              " ".join(self.binaries))
        self._sections["Description"] = s
        self._check_was_run = False
コード例 #11
0
ファイル: auth.py プロジェクト: julian-klode/python-apt
 def __init__(self, name, keyid, date):
     # type: (str, str, str) -> None
     self.raw_name = name
     # Allow to translated some known keys
     self.name = _(name)
     self.keyid = keyid
     self.date = date
コード例 #12
0
ファイル: cache.py プロジェクト: AbyssSong/python-apt
    def open(self, progress=None):
        """ Open the package cache, after that it can be used like
            a dictionary
        """
        if progress is None:
            progress = apt.progress.base.OpProgress()
        self._run_callbacks("cache_pre_open")

        self._cache = apt_pkg.Cache(progress)
        self._depcache = apt_pkg.DepCache(self._cache)
        self._records = apt_pkg.PackageRecords(self._cache)
        self._list = apt_pkg.SourceList()
        self._list.read_main_list()
        self._set.clear()
        self._weakref.clear()

        progress.op = _("Building data structures")
        i = last = 0
        size = len(self._cache.packages)
        for pkg in self._cache.packages:
            if progress is not None and last+100 < i:
                progress.update(i/float(size)*100)
                last = i
            # drop stuff with no versions (cruft)
            if len(pkg.version_list) > 0:
                self._set.add(pkg.name)

            i += 1

        progress.done()
        self._run_callbacks("cache_post_open")
コード例 #13
0
ファイル: debfile.py プロジェクト: P79N6A/docker
    def open(self, file):
        """Open the package."""
        depends_tags = ["Build-Depends", "Build-Depends-Indep"]
        conflicts_tags = ["Build-Conflicts", "Build-Conflicts-Indep"]
        fd = apt_pkg.open_maybe_clear_signed_file(file)
        fobj = os.fdopen(fd)
        tagfile = apt_pkg.TagFile(fobj)
        try:
            for sec in tagfile:
                for tag in depends_tags:
                    if tag not in sec:
                        continue
                    self._depends.extend(apt_pkg.parse_src_depends(sec[tag]))
                for tag in conflicts_tags:
                    if tag not in sec:
                        continue
                    self._conflicts.extend(apt_pkg.parse_src_depends(sec[tag]))
                if 'Source' in sec:
                    self.pkgname = sec['Source']
                if 'Binary' in sec:
                    self.binaries = [
                        b.strip() for b in sec['Binary'].split(',')
                    ]
                for tag in sec.keys():
                    if tag in sec:
                        self._sections[tag] = sec[tag]
        finally:
            del tagfile
            fobj.close()

        s = _("Install Build-Dependencies for "
              "source package '%s' that builds %s\n") % (
                  self.pkgname, " ".join(self.binaries))
        self._sections["Description"] = s
        self._check_was_run = False
コード例 #14
0
 def _check_single_pkg_conflict(self, pkgname, ver, oper):
     # type: (str, str, str) -> bool
     """Return True if a pkg conflicts with a real installed/marked pkg."""
     # FIXME: deal with conflicts against its own provides
     #        (e.g. Provides: ftp-server, Conflicts: ftp-server)
     self._dbg(
         3, "_check_single_pkg_conflict() pkg='%s' ver='%s' oper='%s'" %
         (pkgname, ver, oper))
     pkg = self._cache[pkgname]
     if pkg.is_installed:
         assert pkg.installed is not None
         pkgver = pkg.installed.version
     elif pkg.marked_install:
         assert pkg.candidate is not None
         pkgver = pkg.candidate.version
     else:
         return False
     #print "pkg: %s" % pkgname
     #print "ver: %s" % ver
     #print "pkgver: %s " % pkgver
     #print "oper: %s " % oper
     if (apt_pkg.check_dep(pkgver, oper, ver)
             and not self.replaces_real_pkg(pkgname, oper, ver)):
         self._failure_string += _("Conflicts with the installed package "
                                   "'%s'") % pkg.name
         self._dbg(3, "conflicts with installed pkg '%s'" % pkg.name)
         return True
     return False
コード例 #15
0
    def open(self, file):
        """Open the package."""
        depends_tags = ["Build-Depends", "Build-Depends-Indep"]
        conflicts_tags = ["Build-Conflicts", "Build-Conflicts-Indep"]

        fobj = open(file)
        tagfile = apt_pkg.TagFile(fobj)
        try:
            for sec in tagfile:
                for tag in depends_tags:
                    if not tag in sec:
                        continue
                    self._depends.extend(apt_pkg.parse_src_depends(sec[tag]))
                for tag in conflicts_tags:
                    if not tag in sec:
                        continue
                    self._conflicts.extend(apt_pkg.parse_src_depends(sec[tag]))
                if 'Source' in sec:
                    self.pkgname = sec['Source']
                if 'Binary' in sec:
                    self.binaries = sec['Binary'].split(', ')
                if 'Version' in sec:
                    self._sections['Version'] = sec['Version']
        finally:
            del tagfile
            fobj.close()

        s = _("Install Build-Dependencies for "
              "source package '%s' that builds %s\n") % (
                  self.pkgname, " ".join(self.binaries))
        self._sections["Description"] = s
コード例 #16
0
 def filelist(self):
     """return the list of files in the deb."""
     files = []
     try:
         self._debfile.data.go(lambda item, data: files.append(item.name))
     except SystemError:
         return [_("List of files for '%s' could not be read") %
                 self.filename]
     return files
コード例 #17
0
ファイル: debfile.py プロジェクト: CanaimaKueka/python-apt
 def _get_content(self, part, name, auto_decompress=True, auto_hex=True):
     if name.startswith("./"):
         name = name[2:]
     data = part.extractdata(name)
     # check for zip content
     if name.endswith(".gz") and auto_decompress:
         io = StringIO(data)
         gz = gzip.GzipFile(fileobj=io)
         data = _("Automatically decompressed:\n\n")
         data += gz.read()
     # auto-convert to hex
     try:
         data = unicode(data, "utf-8")
     except Exception:
         new_data = _("Automatically converted to printable ascii:\n")
         new_data += self.to_strish(data)
         return new_data
     return data
コード例 #18
0
 def control_filelist(self):
     """ return the list of files in control.tar.gt """
     control = []
     try:
         self._debfile.control.go(lambda item, data: control.append(item.name))
     except SystemError:
         return [_("List of control files for '%s' could not be read") %
                 self.filename]
     return sorted(control)
コード例 #19
0
ファイル: debfile.py プロジェクト: HannesMann/Smashbuntu
 def _get_content(self, part, name, auto_decompress=True, auto_hex=True):
     if name.startswith("./"):
         name = name[2:]
     data = part.extractdata(name)
     # check for zip content
     if name.endswith(".gz") and auto_decompress:
         io = BytesIO(data)
         gz = gzip.GzipFile(fileobj=io)
         data = _("Automatically decompressed:\n\n").encode("utf-8")
         data += gz.read()
     # auto-convert to hex
     try:
         data = data.decode("utf-8")
     except Exception:
         new_data = _("Automatically converted to printable ascii:\n")
         new_data += self.to_strish(data)
         return new_data
     return data
コード例 #20
0
ファイル: debfile.py プロジェクト: grosskur/python-apt-heroku
 def filelist(self):
     """return the list of files in the deb."""
     files = []
     try:
         self._debfile.data.go(lambda item, data: files.append(item.name))
     except SystemError:
         return [_("List of files for '%s' could not be read") %
                 self.filename]
     return files
コード例 #21
0
 def _get_content(self, part, name, auto_decompress=True, auto_hex=True):
     # type: (apt_inst.TarFile, str, bool, bool) -> str
     if name.startswith("./"):
         name = name[2:]
     data = part.extractdata(name)
     # check for zip content
     if name.endswith(".gz") and auto_decompress:
         io = BytesIO(data)
         gz = gzip.GzipFile(fileobj=io)
         data = _("Automatically decompressed:\n\n").encode("utf-8")
         data += gz.read()
     # auto-convert to hex
     try:
         return data.decode("utf-8")
     except Exception:
         new_data = _("Automatically converted to printable ascii:\n")
         new_data += self.to_strish(data)
         return new_data
コード例 #22
0
ファイル: debfile.py プロジェクト: signalnine/cr48
 def data_content(self, name):
     """ return the content of a specific control.tar.gz file """
     try:
         from debian.debfile import DebFile
     except:
         raise Exception(_("Python-debian module not available"))
     data = DebFile(self.filename).data
     if name in data:
         return self._get_content(data, name)
     return ""
コード例 #23
0
 def check(self):
     """Check if the package is installable.."""
     if not self.check_conflicts():
         for pkgname in self._installed_conflicts:
             if self._cache[pkgname]._pkg.essential:
                 raise Exception(_("An essential package would be removed"))
             self._cache[pkgname].mark_delete()
     # FIXME: a additional run of the checkConflicts()
     #        after _satisfyDepends() should probably be done
     return self._satisfy_depends(self.depends)
コード例 #24
0
 def control_filelist(self):
     """ return the list of files in control.tar.gt """
     control = []
     try:
         self._debfile.control.go(
             lambda item, data: control.append(item.name))
     except SystemError:
         return [_("List of control files for '%s' could not be read") %
                 self.filename]
     return sorted(control)
コード例 #25
0
ファイル: gtk2.py プロジェクト: CanaimaKueka/python-apt
 def pulse(self):
     old.FetchProgress.pulse(self)
     current_item = self.currentItems + 1
     if current_item > self.totalItems:
         current_item = self.totalItems
     if self.current_cps > 0:
         text = (_("Downloading file %(current)li of %(total)li with "
                   "%(speed)s/s") % \
                   {"current": current_item,
                    "total": self.totalItems,
                    "speed": apt_pkg.size_to_str(self.currentCPS)})
     else:
         text = (_("Downloading file %(current)li of %(total)li") % \
                   {"current": current_item,
                    "total": self.totalItems})
     self.emit("status-changed", text, self.percent)
     while self._context.pending():
         self._context.iteration()
     return self._continue
コード例 #26
0
ファイル: debfile.py プロジェクト: AbyssSong/python-apt
 def check(self):
     """Check if the package is installable.."""
     if not self.check_conflicts():
         for pkgname in self._installed_conflicts:
             if self._cache[pkgname]._pkg.essential:
                 raise Exception(_("An essential package would be removed"))
             self._cache[pkgname].mark_delete()
     # FIXME: a additional run of the checkConflicts()
     #        after _satisfyDepends() should probably be done
     return self._satisfy_depends(self.depends)
コード例 #27
0
ファイル: gtk2.py プロジェクト: Alberto-Beralix/Beralix
 def pulse(self):
     old.FetchProgress.pulse(self)
     current_item = self.currentItems + 1
     if current_item > self.totalItems:
         current_item = self.totalItems
     if self.current_cps > 0:
         text = (_("Downloading file %(current)li of %(total)li with "
                   "%(speed)s/s") % \
                   {"current": current_item,
                    "total": self.totalItems,
                    "speed": apt_pkg.size_to_str(self.currentCPS)})
     else:
         text = (_("Downloading file %(current)li of %(total)li") % \
                   {"current": current_item,
                    "total": self.totalItems})
     self.emit("status-changed", text, self.percent)
     while self._context.pending():
         self._context.iteration()
     return self._continue
コード例 #28
0
ファイル: debfile.py プロジェクト: signalnine/cr48
 def control_filelist(self):
     """ return the list of files in control.tar.gt """
     try:
         from debian.debfile import DebFile
     except:
         raise Exception(_("Python-debian module not available"))
     content = []
     for name in DebFile(self.filename).control:
         if name and name != ".":
             content.append(name)
     return sorted(content)
コード例 #29
0
 def pulse(self, owner):
     current_item = self.current_items + 1
     if current_item > self.total_items:
         current_item = self.total_items
     if self.current_cps > 0:
         text = (_("Downloading file %(current)li of %(total)li with "
                   "%(speed)s/s") %
                   {"current": current_item,
                    "total": self.total_items,
                    "speed": apt_pkg.size_to_str(self.current_cps)})
     else:
         text = (_("Downloading file %(current)li of %(total)li") %
                   {"current": current_item,
                    "total": self.total_items})
     self.status_label.setText(text)
     percent = (((self.current_bytes + self.current_items) * 100.0) /
                     float(self.total_bytes + self.total_items))
     self.pbar.setValue(int(percent))
     QtGui.qApp.processEvents()
     return True
コード例 #30
0
ファイル: debfile.py プロジェクト: AbyssSong/python-apt
    def check(self):
        """Check if the package is installable."""
        self._dbg(3, "check_depends")

        # check arch
        arch = self._sections["Architecture"]
        if  arch != "all" and arch != apt_pkg.config.find("APT::Architecture"):
            self._dbg(1, "ERROR: Wrong architecture dude!")
            self._failure_string = _("Wrong architecture '%s'" % arch)
            return False

        # check version
        if self.compare_to_version_in_cache() == VERSION_OUTDATED:
            # the deb is older than the installed
            self._failure_string = _("A later version is already installed")
            return False

        # FIXME: this sort of error handling sux
        self._failure_string = ""

        # check conflicts
        if not self.check_conflicts():
            return False

        # try to satisfy the dependencies
        if not self._satisfy_depends(self.depends):
            return False

        # check for conflicts again (this time with the packages that are
        # makeed for install)
        if not self.check_conflicts():
            return False

        if self._cache._depcache.broken_count > 0:
            self._failure_string = _("Failed to satisfy all dependencies "
                                    "(broken cache)")
            # clean the cache again
            self._cache.clear()
            return False
        return True
コード例 #31
0
    def check(self):
        """Check if the package is installable."""
        self._dbg(3, "check_depends")

        # check arch
        arch = self._sections["Architecture"]
        if arch != "all" and arch != apt_pkg.config.find("APT::Architecture"):
            self._dbg(1, "ERROR: Wrong architecture dude!")
            self._failure_string = _("Wrong architecture '%s'" % arch)
            return False

        # check version
        if self.compare_to_version_in_cache() == VERSION_OUTDATED:
            # the deb is older than the installed
            self._failure_string = _("A later version is already installed")
            return False

        # FIXME: this sort of error handling sux
        self._failure_string = ""

        # check conflicts
        if not self.check_conflicts():
            return False

        # try to satisfy the dependencies
        if not self._satisfy_depends(self.depends):
            return False

        # check for conflicts again (this time with the packages that are
        # makeed for install)
        if not self.check_conflicts():
            return False

        if self._cache._depcache.broken_count > 0:
            self._failure_string = _("Failed to satisfy all dependencies "
                                     "(broken cache)")
            # clean the cache again
            self._cache.clear()
            return False
        return True
コード例 #32
0
 def _get_mirror_name(self, server):
     ''' Try to get a human readable name for the main mirror of a country
         Customize for different distributions '''
     country = None
     i = server.find("://")
     l = server.find(".archive.ubuntu.com")
     if i != -1 and l != -1:
         country = server[i + len("://"):l]
     if country in self.countries:
         # TRANSLATORS: %s is a country
         return _("Server for %s") % self.countries[country]
     else:
         return ("%s" % server.rstrip("/ "))
コード例 #33
0
    def pulse(self, owner):
        base.AcquireProgress.pulse(self, owner)
        current_item = self.current_items + 1
        if current_item > self.total_items:
            current_item = self.total_items
        if self.current_cps > 0:
            text = (_("Downloading file %(current)li of %(total)li with "
                      "%(speed)s/s") % \
                      {"current": current_item,
                       "total": self.total_items,
                       "speed": apt_pkg.size_to_str(self.current_cps)})
        else:
            text = (_("Downloading file %(current)li of %(total)li") % \
                      {"current": current_item,
                       "total": self.total_items})

        percent = (((self.current_bytes + self.current_items) * 100.0) /
                        float(self.total_bytes + self.total_items))
        self.emit("status-changed", text, percent)
        while self._context.pending():
            self._context.iteration()
        return self._continue
コード例 #34
0
ファイル: distro.py プロジェクト: cckwesHope/rpi_sysroot
 def _get_mirror_name(self, server):
     ''' Try to get a human readable name for the main mirror of a country
         Customize for different distributions '''
     country = None
     i = server.find("://")
     l = server.find(".archive.ubuntu.com")
     if i != -1 and l != -1:
         country = server[i + len("://"):l]
     if country in self.countries:
         # TRANSLATORS: %s is a country
         return _("Server for %s") % self.countries[country]
     else:
         return("%s" % server.rstrip("/ "))
コード例 #35
0
ファイル: distro.py プロジェクト: thnguyn2/ECE_527_MP
 def _get_mirror_name(self, server):
     """ Try to get a human readable name for the main mirror of a country
         Debian specific """
     country = None
     i = server.find("://ftp.")
     l = server.find(".debian.org")
     if i != -1 and l != -1:
         country = server[i + len("://ftp.") : l]
     if country in self.countries:
         # TRANSLATORS: %s is a country
         return _("Server for %s") % gettext.dgettext("iso_3166", self.countries[country].rstrip()).rstrip()
     else:
         return "%s" % server.rstrip("/ ")
コード例 #36
0
 def pulse(self, owner):
     current_item = self.current_items + 1
     if current_item > self.total_items:
         current_item = self.total_items
     if self.current_cps > 0:
         text = (_("Downloading file %(current)li of %(total)li with "
                   "%(speed)s/s") % {
                       "current": current_item,
                       "total": self.total_items,
                       "speed": apt_pkg.size_to_str(self.current_cps)
                   })
     else:
         text = (_("Downloading file %(current)li of %(total)li") % {
             "current": current_item,
             "total": self.total_items
         })
     self.status_label.setText(text)
     percent = (((self.current_bytes + self.current_items) * 100.0) /
                float(self.total_bytes + self.total_items))
     self.pbar.setValue(int(percent))
     QtGui.qApp.processEvents()
     return True
コード例 #37
0
ファイル: gtk2.py プロジェクト: Alberto-Beralix/Beralix
    def pulse(self, owner):
        base.AcquireProgress.pulse(self, owner)
        current_item = self.current_items + 1
        if current_item > self.total_items:
            current_item = self.total_items
        if self.current_cps > 0:
            text = (_("Downloading file %(current)li of %(total)li with "
                      "%(speed)s/s") % \
                      {"current": current_item,
                       "total": self.total_items,
                       "speed": apt_pkg.size_to_str(self.current_cps)})
        else:
            text = (_("Downloading file %(current)li of %(total)li") % \
                      {"current": current_item,
                       "total": self.total_items})

        percent = (((self.current_bytes + self.current_items) * 100.0) /
                        float(self.total_bytes + self.total_items))
        self.emit("status-changed", text, percent)
        while self._context.pending():
            self._context.iteration()
        return self._continue
コード例 #38
0
 def _get_mirror_name(self, server):
     ''' Try to get a human readable name for the main mirror of a country
         Debian specific '''
     country = None
     i = server.find("://ftp.")
     l = server.find(".debian.org")
     if i != -1 and l != -1:
         country = server[i + len("://ftp."):l]
     if country in self.countries:
         # TRANSLATORS: %s is a country
         return _("Server for %s") % gettext.dgettext(
             "iso_3166", self.countries[country].rstrip()).rstrip()
     else:
         return ("%s" % server.rstrip("/ "))
コード例 #39
0
ファイル: gtk2.py プロジェクト: Alberto-Beralix/Beralix
    def __init__(self):
        gtk.VBox.__init__(self)
        self.set_spacing(6)
        # Setup some child widgets
        self._expander = gtk.Expander(_("Details"))
        self._terminal = vte.Terminal()
        #self._terminal.set_font_from_string("monospace 10")
        self._expander.add(self._terminal)
        self._progressbar = gtk.ProgressBar()
        # Setup the always italic status label
        self._label = gtk.Label()
        attr_list = pango.AttrList()
        attr_list.insert(pango.AttrStyle(pango.STYLE_ITALIC, 0, -1))
        self._label.set_attributes(attr_list)
        self._label.set_ellipsize(pango.ELLIPSIZE_END)
        self._label.set_alignment(0, 0)
        # add child widgets
        self.pack_start(self._progressbar, False)
        self.pack_start(self._label, False)
        self.pack_start(self._expander, False)
        # Setup the internal progress handlers
        self._progress_open = GOpProgress()
        self._progress_open.connect("status-changed", self._on_status_changed)
        self._progress_open.connect("status-started", self._on_status_started)
        self._progress_open.connect("status-finished",
                                    self._on_status_finished)
        self._progress_acquire = GAcquireProgress()
        self._progress_acquire.connect("status-changed",
                                       self._on_status_changed)
        self._progress_acquire.connect("status-started",
                                       self._on_status_started)
        self._progress_acquire.connect("status-finished",
                                     self._on_status_finished)

        self._progress_fetch = None
        self._progress_install = GInstallProgress(self._terminal)
        self._progress_install.connect("status-changed",
                                       self._on_status_changed)
        self._progress_install.connect("status-started",
                                       self._on_status_started)
        self._progress_install.connect("status-finished",
                                     self._on_status_finished)
        self._progress_install.connect("status-timeout",
                                     self._on_status_timeout)
        self._progress_install.connect("status-error",
                                     self._on_status_timeout)
        self._progress_install.connect("status-conffile",
                                     self._on_status_timeout)
コード例 #40
0
    def __init__(self):
        gtk.VBox.__init__(self)
        self.set_spacing(6)
        # Setup some child widgets
        self._expander = gtk.Expander(_("Details"))
        self._terminal = vte.Terminal()
        #self._terminal.set_font_from_string("monospace 10")
        self._expander.add(self._terminal)
        self._progressbar = gtk.ProgressBar()
        # Setup the always italic status label
        self._label = gtk.Label()
        attr_list = pango.AttrList()
        attr_list.insert(pango.AttrStyle(pango.STYLE_ITALIC, 0, -1))
        self._label.set_attributes(attr_list)
        self._label.set_ellipsize(pango.ELLIPSIZE_END)
        self._label.set_alignment(0, 0)
        # add child widgets
        self.pack_start(self._progressbar, False)
        self.pack_start(self._label, False)
        self.pack_start(self._expander, False)
        # Setup the internal progress handlers
        self._progress_open = GOpProgress()
        self._progress_open.connect("status-changed", self._on_status_changed)
        self._progress_open.connect("status-started", self._on_status_started)
        self._progress_open.connect("status-finished",
                                    self._on_status_finished)
        self._progress_acquire = GAcquireProgress()
        self._progress_acquire.connect("status-changed",
                                       self._on_status_changed)
        self._progress_acquire.connect("status-started",
                                       self._on_status_started)
        self._progress_acquire.connect("status-finished",
                                     self._on_status_finished)

        self._progress_fetch = None
        self._progress_install = GInstallProgress(self._terminal)
        self._progress_install.connect("status-changed",
                                       self._on_status_changed)
        self._progress_install.connect("status-started",
                                       self._on_status_started)
        self._progress_install.connect("status-finished",
                                     self._on_status_finished)
        self._progress_install.connect("status-timeout",
                                     self._on_status_timeout)
        self._progress_install.connect("status-error",
                                     self._on_status_timeout)
        self._progress_install.connect("status-conffile",
                                     self._on_status_timeout)
コード例 #41
0
ファイル: debfile.py プロジェクト: julian-klode/python-apt
    def check(self, allow_downgrade=False):
        # type: (bool) -> bool
        """Check if the package is installable.

        The second parameter is ignored and only exists for compatibility
        with parent type."""
        if not self.check_conflicts():
            for pkgname in self._installed_conflicts:
                if self._cache[pkgname]._pkg.essential:
                    raise Exception(_("An essential package would be removed"))
                self._cache[pkgname].mark_delete()
        # properties are ok now
        self._check_was_run = True
        # FIXME: a additional run of the check_conflicts()
        #        after _satisfy_depends() should probably be done
        return self._satisfy_depends(self.depends)
コード例 #42
0
    def check(self, allow_downgrade=False):
        # type: (bool) -> bool
        """Check if the package is installable.

        The second parameter is ignored and only exists for compatibility
        with parent type."""
        if not self.check_conflicts():
            for pkgname in self._installed_conflicts:
                if self._cache[pkgname]._pkg.essential:
                    raise Exception(_("An essential package would be removed"))
                self._cache[pkgname].mark_delete()
        # properties are ok now
        self._check_was_run = True
        # FIXME: a additional run of the check_conflicts()
        #        after _satisfy_depends() should probably be done
        return self._satisfy_depends(self.depends)
コード例 #43
0
ファイル: package.py プロジェクト: johnsonc/swarm
    def description(self):
        """Return the formatted long description.

        Return the formated long description according to the Debian policy
        (Chapter 5.6.13).
        See http://www.debian.org/doc/debian-policy/ch-controlfields.html
        for more information.
        """
        desc = ""
        dsc = self._translated_records.long_desc
        try:
            if not isinstance(dsc, unicode):
                # Only convert where needed (i.e. Python 2.X)
                dsc = unicode(dsc, "utf-8")
        except UnicodeDecodeError, err:
            return _("Invalid unicode in description for '%s' (%s). " "Please report.") % (self.package.name, err)
コード例 #44
0
ファイル: package.py プロジェクト: lucchouina/Rim
    def description(self):
        """Return the formatted long description.

        Return the formated long description according to the Debian policy
        (Chapter 5.6.13).
        See http://www.debian.org/doc/debian-policy/ch-controlfields.html
        for more information.
        """
        desc = ''
        dsc = self._translated_records.long_desc
        try:
            if not isinstance(dsc, unicode):
                # Only convert where needed (i.e. Python 2.X)
                dsc = unicode(dsc, "utf-8")
        except UnicodeDecodeError, err:
            return _("Invalid unicode in description for '%s' (%s). "
                     "Please report.") % (self.package.name, err)
コード例 #45
0
ファイル: debfile.py プロジェクト: julian-klode/python-apt
    def _satisfy_or_group(self, or_group):
        # type: (List[Tuple[str, str, str]]) -> bool
        """Try to satisfy the or_group."""
        for dep in or_group:
            depname, ver, oper = dep

            # multiarch
            depname = self._maybe_append_multiarch_suffix(depname)

            # if we don't have it in the cache, it may be virtual
            if depname not in self._cache:
                if not self._cache.is_virtual_package(depname):
                    continue
                providers = self._cache.get_providing_packages(depname)
                # if a package just has a single virtual provider, we
                # just pick that (just like apt)
                if len(providers) != 1:
                    continue
                depname = providers[0].name

            # now check if we can satisfy the deps with the candidate(s)
            # in the cache
            pkg = self._cache[depname]
            cand = self._cache._depcache.get_candidate_ver(pkg._pkg)
            if not cand:
                continue
            if not apt_pkg.check_dep(cand.ver_str, oper, ver):
                continue

            # check if we need to install it
            self._dbg(2, "Need to get: %s" % depname)
            self._need_pkgs.append(depname)
            return True

        # if we reach this point, we failed
        or_str = ""
        for dep in or_group:
            or_str += dep[0]
            if ver and oper:
                or_str += " (%s %s)" % (dep[2], dep[1])
            if dep != or_group[len(or_group) - 1]:
                or_str += "|"
        self._failure_string += _(
            "Dependency is not satisfiable: %s\n") % or_str
        return False
コード例 #46
0
ファイル: package.py プロジェクト: CanaimaKueka/python-apt
    def description(self):
        """Return the formatted long description.

        Return the formatted long description according to the Debian policy
        (Chapter 5.6.13).
        See http://www.debian.org/doc/debian-policy/ch-controlfields.html
        for more information.
        """
        desc = ''
        dsc = self._translated_records.long_desc
        try:
            if not isinstance(dsc, unicode):
                # Only convert where needed (i.e. Python 2.X)
                dsc = unicode(dsc, "utf-8")
        except UnicodeDecodeError as err:
            return _("Invalid unicode in description for '%s' (%s). "
                     "Please report.") % (self.package.name, err)

        lines = iter(dsc.split("\n"))
        # Skip the first line, since its a duplication of the summary
        lines.next()
        for raw_line in lines:
            if raw_line.strip() == ".":
                # The line is just line break
                if not desc.endswith("\n"):
                    desc += "\n\n"
                continue
            if raw_line.startswith("  "):
                # The line should be displayed verbatim without word wrapping
                if not desc.endswith("\n"):
                    line = "\n%s\n" % raw_line[2:]
                else:
                    line = "%s\n" % raw_line[2:]
            elif raw_line.startswith(" "):
                # The line is part of a paragraph.
                if desc.endswith("\n") or desc == "":
                    # Skip the leading white space
                    line = raw_line[1:]
                else:
                    line = raw_line
            else:
                line = raw_line
            # Add current line to the description
            desc += line
        return desc
コード例 #47
0
    def description(self):
        """Return the formatted long description.

        Return the formatted long description according to the Debian policy
        (Chapter 5.6.13).
        See http://www.debian.org/doc/debian-policy/ch-controlfields.html
        for more information.
        """
        desc = ''
        dsc = self._translated_records.long_desc
        try:
            if not isinstance(dsc, unicode):
                # Only convert where needed (i.e. Python 2.X)
                dsc = unicode(dsc, "utf-8")
        except UnicodeDecodeError as err:
            return _("Invalid unicode in description for '%s' (%s). "
                  "Please report.") % (self.package.name, err)

        lines = iter(dsc.split("\n"))
        # Skip the first line, since its a duplication of the summary
        lines.next()
        for raw_line in lines:
            if raw_line.strip() == ".":
                # The line is just line break
                if not desc.endswith("\n"):
                    desc += "\n\n"
                continue
            if raw_line.startswith("  "):
                # The line should be displayed verbatim without word wrapping
                if not desc.endswith("\n"):
                    line = "\n%s\n" % raw_line[2:]
                else:
                    line = "%s\n" % raw_line[2:]
            elif raw_line.startswith(" "):
                # The line is part of a paragraph.
                if desc.endswith("\n") or desc == "":
                    # Skip the leading white space
                    line = raw_line[1:]
                else:
                    line = raw_line
            else:
                line = raw_line
            # Add current line to the description
            desc += line
        return desc
コード例 #48
0
    def _satisfy_or_group(self, or_group):
        # type: (List[Tuple[str, str, str]]) -> bool
        """Try to satisfy the or_group."""
        for dep in or_group:
            depname, ver, oper = dep

            # multiarch
            depname = self._maybe_append_multiarch_suffix(depname)

            # if we don't have it in the cache, it may be virtual
            if depname not in self._cache:
                if not self._cache.is_virtual_package(depname):
                    continue
                providers = self._cache.get_providing_packages(depname)
                # if a package just has a single virtual provider, we
                # just pick that (just like apt)
                if len(providers) != 1:
                    continue
                depname = providers[0].name

            # now check if we can satisfy the deps with the candidate(s)
            # in the cache
            pkg = self._cache[depname]
            cand = self._cache._depcache.get_candidate_ver(pkg._pkg)
            if not cand:
                continue
            if not apt_pkg.check_dep(cand.ver_str, oper, ver):
                continue

            # check if we need to install it
            self._dbg(2, "Need to get: %s" % depname)
            self._need_pkgs.append(depname)
            return True

        # if we reach this point, we failed
        or_str = ""
        for dep in or_group:
            or_str += dep[0]
            if ver and oper:
                or_str += " (%s %s)" % (dep[2], dep[1])
            if dep != or_group[len(or_group) - 1]:
                or_str += "|"
        self._failure_string += _(
            "Dependency is not satisfiable: %s\n") % or_str
        return False
コード例 #49
0
ファイル: cache.py プロジェクト: pombreda/OnionScraper
    def open(self, progress=None):
        """ Open the package cache, after that it can be used like
            a dictionary
        """
        if progress is None:
            progress = apt.progress.base.OpProgress()
        # close old cache on (re)open
        self.close()
        self.op_progress = progress
        self._run_callbacks("cache_pre_open")

        self._cache = apt_pkg.Cache(progress)
        self._depcache = apt_pkg.DepCache(self._cache)
        self._records = apt_pkg.PackageRecords(self._cache)
        self._list = apt_pkg.SourceList()
        self._list.read_main_list()
        self._set.clear()
        self._fullnameset.clear()
        self._sorted_set = None
        self._weakref.clear()

        self._have_multi_arch = len(apt_pkg.get_architectures()) > 1

        progress.op = _("Building data structures")
        i = last = 0
        size = len(self._cache.packages)
        for pkg in self._cache.packages:
            if progress is not None and last + 100 < i:
                progress.update(i / float(size) * 100)
                last = i
            # drop stuff with no versions (cruft)
            if pkg.has_versions:
                self._set.add(pkg.get_fullname(pretty=True))
                if self._have_multi_arch:
                    self._fullnameset.add(pkg.get_fullname(pretty=False))

            i += 1

        progress.done()
        self._run_callbacks("cache_post_open")
コード例 #50
0
ファイル: cache.py プロジェクト: HuayraLinux/python-apt
    def open(self, progress=None):
        """ Open the package cache, after that it can be used like
            a dictionary
        """
        if progress is None:
            progress = apt.progress.base.OpProgress()
        # close old cache on (re)open
        self.close()
        self.op_progress = progress
        self._run_callbacks("cache_pre_open")

        self._cache = apt_pkg.Cache(progress)
        self._depcache = apt_pkg.DepCache(self._cache)
        self._records = apt_pkg.PackageRecords(self._cache)
        self._list = apt_pkg.SourceList()
        self._list.read_main_list()
        self._set.clear()
        self._fullnameset.clear()
        self._sorted_set = None
        self._weakref.clear()

        self._have_multi_arch = len(apt_pkg.get_architectures()) > 1

        progress.op = _("Building data structures")
        i = last = 0
        size = len(self._cache.packages)
        for pkg in self._cache.packages:
            if progress is not None and last + 100 < i:
                progress.update(i / float(size) * 100)
                last = i
            # drop stuff with no versions (cruft)
            if pkg.has_versions:
                self._set.add(pkg.get_fullname(pretty=True))
                if self._have_multi_arch:
                    self._fullnameset.add(pkg.get_fullname(pretty=False))

            i += 1

        progress.done()
        self._run_callbacks("cache_post_open")
コード例 #51
0
ファイル: debfile.py プロジェクト: P79N6A/docker
 def _satisfy_depends(self, depends):
     """Satisfy the dependencies."""
     # turn off MarkAndSweep via a action group (if available)
     try:
         _actiongroup = apt_pkg.ActionGroup(self._cache._depcache)
         _actiongroup  # pyflakes
     except AttributeError:
         pass
     # check depends
     for or_group in depends:
         if not self._is_or_group_satisfied(or_group):
             if not self._satisfy_or_group(or_group):
                 return False
     # now try it out in the cache
     for pkg in self._need_pkgs:
         try:
             self._cache[pkg].mark_install(from_user=False)
         except SystemError:
             self._failure_string = _("Cannot install '%s'") % pkg
             self._cache.clear()
             return False
     return True
コード例 #52
0
ファイル: debfile.py プロジェクト: grosskur/python-apt-heroku
 def _satisfy_depends(self, depends):
     """Satisfy the dependencies."""
     # turn off MarkAndSweep via a action group (if available)
     try:
         _actiongroup = apt_pkg.ActionGroup(self._cache._depcache)
         _actiongroup  # pyflakes
     except AttributeError:
         pass
     # check depends
     for or_group in depends:
         if not self._is_or_group_satisfied(or_group):
             if not self._satisfy_or_group(or_group):
                 return False
     # now try it out in the cache
     for pkg in self._need_pkgs:
         try:
             self._cache[pkg].mark_install(from_user=False)
         except SystemError:
             self._failure_string = _("Cannot install '%s'") % pkg
             self._cache.clear()
             return False
     return True
コード例 #53
0
    def open(self, file):
        """Open the package."""
        depends_tags = ["Build-Depends", "Build-Depends-Indep"]
        conflicts_tags = ["Build-Conflicts", "Build-Conflicts-Indep"]
        fobj = open(file)
        tagfile = apt_pkg.TagFile(fobj)
        try:
            for sec in tagfile:
                # we only care about the stanza with the "Format:" tag, the
                # rest is gpg signature noise. we should probably have
                # bindings for apts OpenMaybeClearsignedFile()
                if "Format" not in sec:
                    continue
                for tag in depends_tags:
                    if tag not in sec:
                        continue
                    self._depends.extend(apt_pkg.parse_src_depends(sec[tag]))
                for tag in conflicts_tags:
                    if tag not in sec:
                        continue
                    self._conflicts.extend(apt_pkg.parse_src_depends(sec[tag]))
                if 'Source' in sec:
                    self.pkgname = sec['Source']
                if 'Binary' in sec:
                    self.binaries = [b.strip() for b in
                                     sec['Binary'].split(',')]
                for tag in sec.keys():
                    if tag in sec:
                        self._sections[tag] = sec[tag]
        finally:
            del tagfile
            fobj.close()

        s = _("Install Build-Dependencies for "
              "source package '%s' that builds %s\n") % (self.pkgname,
              " ".join(self.binaries))
        self._sections["Description"] = s
        self._check_was_run = False
コード例 #54
0
    # type: () -> List[TrustedKey]
    """Returns a list of TrustedKey instances for each key which is
    used to trust repositories.
    """
    # The output of `apt-key list` is difficult to parse since the
    # --with-colons parameter isn't user
    output = _call_apt_key_script("adv", "--with-colons", "--batch",
                                  "--fixed-list-mode", "--list-keys")
    res = []
    for line in output.split("\n"):
        fields = line.split(":")
        if fields[0] == "pub":
            keyid = fields[4]
        if fields[0] == "uid":
            uid = fields[9]
            creation_date = fields[5]
            key = TrustedKey(uid, keyid, creation_date)
            res.append(key)
    return res


if __name__ == "__main__":
    # Add some known keys we would like to see translated so that they get
    # picked up by gettext
    lambda: _("Ubuntu Archive Automatic Signing Key <*****@*****.**>")
    lambda: _("Ubuntu CD Image Automatic Signing Key <*****@*****.**>")

    apt_pkg.init()
    for trusted_key in list_keys():
        print(trusted_key)
コード例 #55
0
    def __init__(self,
                 dist = None,
                 base_dir = "/usr/share/python-apt/templates"):
        self.metarelease_uri = ''
        self.templates = []
        self.arch = apt_pkg.config.find("APT::Architecture")

        location = None
        match_loc = re.compile(r"^#LOC:(.+)$")
        match_mirror_line = re.compile(
            r"^(#LOC:.+)|(((http)|(ftp)|(rsync)|(file)|(mirror)|(https))://"
            r"[A-Za-z0-9/\.:\-_@]+)$")
        #match_mirror_line = re.compile(r".+")

        if not dist:
            try:
                dist = Popen(["lsb_release", "-i", "-s"],
                             stdout=PIPE).communicate()[0].strip()
            except OSError as exc:
                if exc.errno != errno.ENOENT:
                    logging.warn('lsb_release failed, using defaults:' % exc)
                dist = "Debian"

        self.dist = dist

        map_mirror_sets = {}

        dist_fname = "%s/%s.info" % (base_dir, dist)
        with open(dist_fname) as dist_file:
            template = None
            component = None
            for line in dist_file:
                tokens = line.split(':', 1)
                if len(tokens) < 2:
                    continue
                field = tokens[0].strip()
                value = tokens[1].strip()
                if field == 'ChangelogURI':
                    self.changelogs_uri = _(value)
                elif field == 'MetaReleaseURI':
                    self.metarelease_uri = value
                elif field == 'Suite':
                    self.finish_template(template, component)
                    component=None
                    template = Template()
                    template.name = value
                    template.distribution = dist
                    template.match_name = "^%s$" % value
                elif field == 'MatchName':
                    template.match_name = value
                elif field == 'ParentSuite':
                    template.child = True
                    for nanny in self.templates:
                        # look for parent and add back ref to it
                        if nanny.name == value:
                            template.parents.append(nanny)
                            nanny.children.append(template)
                elif field == 'Available':
                    template.available = apt_pkg.string_to_bool(value)
                elif field == 'Official':
                    template.official = apt_pkg.string_to_bool(value)
                elif field == 'RepositoryType':
                    template.type = value
                elif field == 'BaseURI' and not template.base_uri:
                    template.base_uri = value
                elif field == 'BaseURI-%s' % self.arch:
                    template.base_uri = value
                elif field == 'MatchURI' and not template.match_uri:
                    template.match_uri = value
                elif field == 'MatchURI-%s' % self.arch:
                    template.match_uri = value
                elif (field == 'MirrorsFile' or
                      field == 'MirrorsFile-%s' % self.arch):
                    # Make the path absolute.
                    value = os.path.isabs(value) and value or \
                            os.path.abspath(os.path.join(base_dir, value))
                    if value not in map_mirror_sets:
                        mirror_set = {}
                        try:
                            with open(value) as value_f:
                                mirror_data = filter(match_mirror_line.match,
                                                     [x.strip() for x in
                                                      value_f])
                        except Exception:
                            print "WARNING: Failed to read mirror file"
                            mirror_data = []
                        for line in mirror_data:
                            if line.startswith("#LOC:"):
                                location = match_loc.sub(r"\1", line)
                                continue
                            (proto, hostname, dir) = split_url(line)
                            if hostname in mirror_set:
                                mirror_set[hostname].add_repository(proto, dir)
                            else:
                                mirror_set[hostname] = Mirror(
                                    proto, hostname, dir, location)
                        map_mirror_sets[value] = mirror_set
                    template.mirror_set = map_mirror_sets[value]
                elif field == 'Description':
                    template.description = _(value)
                elif field == 'Component':
                    if (component and not
                        template.has_component(component.name)):
                        template.components.append(component)
                    component = Component(value)
                elif field == 'CompDescription':
                    component.set_description(_(value))
                elif field == 'CompDescriptionLong':
                    component.set_description_long(_(value))
                elif field == 'ParentComponent':
                    component.set_parent_component(value)
            self.finish_template(template, component)
            template=None
            component=None
コード例 #56
0
 def check_breaks_existing_packages(self):
     # type: () -> bool
     """
     check if installing the package would break exsisting
     package on the system, e.g. system has:
     smc depends on smc-data (= 1.4)
     and user tries to installs smc-data 1.6
     """
     # show progress information as this step may take some time
     size = float(len(self._cache))
     steps = max(int(size / 50), 1)
     debver = self._sections["Version"]
     debarch = self._sections["Architecture"]
     # store what we provide so that we can later check against that
     provides = [x[0][0] for x in self.provides]
     for (i, pkg) in enumerate(self._cache):
         if i % steps == 0:
             self._cache.op_progress.update(float(i) / size * 100.0)
         if not pkg.is_installed:
             continue
         assert pkg.installed is not None
         # check if the exising dependencies are still satisfied
         # with the package
         ver = pkg._pkg.current_ver
         for dep_or in pkg.installed.dependencies:
             for dep in dep_or.or_dependencies:
                 if dep.name == self.pkgname:
                     if not apt_pkg.check_dep(debver, dep.relation,
                                              dep.version):
                         self._dbg(2, "would break (depends) %s" % pkg.name)
                         # TRANSLATORS: the first '%s' is the package that
                         # breaks, the second the dependency that makes it
                         # break, the third the relation (e.g. >=) and the
                         # latest the version for the releation
                         self._failure_string += _(
                             "Breaks existing package '%(pkgname)s' "
                             "dependency %(depname)s "
                             "(%(deprelation)s %(depversion)s)") % {
                                 'pkgname': pkg.name,
                                 'depname': dep.name,
                                 'deprelation': dep.relation,
                                 'depversion': dep.version
                             }
                         self._cache.op_progress.done()
                         return False
         # now check if there are conflicts against this package on
         # the existing system
         if "Conflicts" in ver.depends_list:
             for conflicts_ver_list in ver.depends_list["Conflicts"]:
                 for c_or in conflicts_ver_list:
                     if (c_or.target_pkg.name == self.pkgname
                             and c_or.target_pkg.architecture == debarch):
                         if apt_pkg.check_dep(debver, c_or.comp_type,
                                              c_or.target_ver):
                             self._dbg(
                                 2, "would break (conflicts) %s" % pkg.name)
                             # TRANSLATORS: the first '%s' is the package
                             # that conflicts, the second the packagename
                             # that it conflicts with (so the name of the
                             # deb the user tries to install), the third is
                             # the relation (e.g. >=) and the last is the
                             # version for the relation
                             self._failure_string += _(
                                 "Breaks existing package '%(pkgname)s' "
                                 "conflict: %(targetpkg)s "
                                 "(%(comptype)s %(targetver)s)") % {
                                     'pkgname': pkg.name,
                                     'targetpkg': c_or.target_pkg.name,
                                     'comptype': c_or.comp_type,
                                     'targetver': c_or.target_ver
                                 }
                             self._cache.op_progress.done()
                             return False
                     if (c_or.target_pkg.name in provides
                             and self.pkgname != pkg.name):
                         self._dbg(2,
                                   "would break (conflicts) %s" % provides)
                         self._failure_string += _(
                             "Breaks existing package '%(pkgname)s' "
                             "that conflict: '%(targetpkg)s'. But the "
                             "'%(debfile)s' provides it via: "
                             "'%(provides)s'") % {
                                 'provides': ",".join(provides),
                                 'debfile': self.filename,
                                 'targetpkg': c_or.target_pkg.name,
                                 'pkgname': pkg.name
                             }
                         self._cache.op_progress.done()
                         return False
     self._cache.op_progress.done()
     return True
コード例 #57
0
    def __init__(self, dist=None, base_dir="/usr/share/python-apt/templates"):
        self.metarelease_uri = ''
        self.templates = []
        self.arch = apt_pkg.config.find("APT::Architecture")

        location = None
        match_loc = re.compile(r"^#LOC:(.+)$")
        match_mirror_line = re.compile(
            r"^(#LOC:.+)|(((http)|(ftp)|(rsync)|(file)|(mirror)|(https))://"
            r"[A-Za-z0-9/\.:\-_@]+)$")
        #match_mirror_line = re.compile(r".+")

        if not dist:
            try:
                dist = Popen(["lsb_release", "-i", "-s"],
                             stdout=PIPE).communicate()[0].strip()
            except OSError as exc:
                if exc.errno != errno.ENOENT:
                    logging.warning('lsb_release failed, using defaults:' %
                                    exc)
                dist = "Debian"

        self.dist = dist

        map_mirror_sets = {}

        dist_fname = "%s/%s.info" % (base_dir, dist)
        with open(dist_fname) as dist_file:
            template = None
            component = None
            for line in dist_file:
                tokens = line.split(':', 1)
                if len(tokens) < 2:
                    continue
                field = tokens[0].strip()
                value = tokens[1].strip()
                if field == 'ChangelogURI':
                    self.changelogs_uri = _(value)
                elif field == 'MetaReleaseURI':
                    self.metarelease_uri = value
                elif field == 'Suite':
                    self.finish_template(template, component)
                    component = None
                    template = Template()
                    template.name = value
                    template.distribution = dist
                    template.match_name = "^%s$" % value
                elif field == 'MatchName':
                    template.match_name = value
                elif field == 'ParentSuite':
                    template.child = True
                    for nanny in self.templates:
                        # look for parent and add back ref to it
                        if nanny.name == value:
                            template.parents.append(nanny)
                            nanny.children.append(template)
                elif field == 'Available':
                    template.available = apt_pkg.string_to_bool(value)
                elif field == 'Official':
                    template.official = apt_pkg.string_to_bool(value)
                elif field == 'RepositoryType':
                    template.type = value
                elif field == 'BaseURI' and not template.base_uri:
                    template.base_uri = value
                elif field == 'BaseURI-%s' % self.arch:
                    template.base_uri = value
                elif field == 'MatchURI' and not template.match_uri:
                    template.match_uri = value
                elif field == 'MatchURI-%s' % self.arch:
                    template.match_uri = value
                elif (field == 'MirrorsFile'
                      or field == 'MirrorsFile-%s' % self.arch):
                    # Make the path absolute.
                    value = os.path.isabs(value) and value or \
                            os.path.abspath(os.path.join(base_dir, value))
                    if value not in map_mirror_sets:
                        mirror_set = {}
                        try:
                            with open(value) as value_f:
                                mirror_data = list(
                                    filter(match_mirror_line.match,
                                           [x.strip() for x in value_f]))
                        except Exception:
                            print("WARNING: Failed to read mirror file")
                            mirror_data = []
                        for line in mirror_data:
                            if line.startswith("#LOC:"):
                                location = match_loc.sub(r"\1", line)
                                continue
                            (proto, hostname, dir) = split_url(line)
                            if hostname in mirror_set:
                                mirror_set[hostname].add_repository(proto, dir)
                            else:
                                mirror_set[hostname] = Mirror(
                                    proto, hostname, dir, location)
                        map_mirror_sets[value] = mirror_set
                    template.mirror_set = map_mirror_sets[value]
                elif field == 'Description':
                    template.description = _(value)
                elif field == 'Component':
                    if (component
                            and not template.has_component(component.name)):
                        template.components.append(component)
                    component = Component(value)
                elif field == 'CompDescription':
                    component.set_description(_(value))
                elif field == 'CompDescriptionLong':
                    component.set_description_long(_(value))
                elif field == 'ParentComponent':
                    component.set_parent_component(value)
            self.finish_template(template, component)
            template = None
            component = None
コード例 #58
0
 def _on_status_finished(self, progress):
     """Called when something finished."""
     self._on_status_changed(progress, _("Complete"), 100)
     while gtk.events_pending():
         gtk.main_iteration()
コード例 #59
0
 def _on_status_started(self, progress):
     """Called when something starts."""
     self._on_status_changed(progress, _("Starting..."), 0)
     while gtk.events_pending():
         gtk.main_iteration()