def _read(self, n):
read_result = Result()
def cb(handle, data, error):
self._handle.stop_read()
if error is not None:
if error != pyuv.errno.UV_EOF:
read_result.set_exception(PipeError(convert_errno(error), pyuv.errno.strerror(error)))
else:
read_result.set_result(b'')
else:
read_result.set_result(data)
try:
self._handle.start_read(cb)
except pyuv.error.PipeError as e:
self.close()
raise PipeError(convert_errno(e.args[0]), e.args[1])
try:
data = read_result.wait()
except PipeError as e:
self.close()
raise
else:
if not data:
self.close()
return
self._read_buffer.feed(data)
def connect(self, target, source_address=None):
if self._connected:
raise TCPError('already connected')
host, port = target
try:
r = socket.getaddrinfo(host, port, socket.AF_UNSPEC, socket.SOCK_STREAM)
except socket.error as e:
raise TCPError(e)
if not r:
raise TCPError('getaddrinfo returned no result')
connect_result = Result()
def cb(handle, error):
if error is not None:
connect_result.set_exception(TCPError(convert_errno(error), pyuv.errno.strerror(error)))
else:
connect_result.set_result(None)
err = None
loop = self._handle.loop
for item in r:
addr = item[-1]
if '%' in addr[0]:
# Skip addresses such as 'fe80::1%lo0'
# TODO: handle this properly
continue
handle = pyuv.TCP(loop)
try:
if source_address:
handle.bind(source_address)
handle.connect(addr, cb)
except pyuv.error.TCPError as e:
err = TCPError(convert_errno(e.args[0]), e.args[1])
handle.close()
continue
try:
connect_result.wait()
except TCPError as e:
err = e
handle.close()
connect_result.clear()
continue
else:
self._handle.close()
self._handle = handle
break
if err is not None:
raise err
self._set_connected()
def connect(self, target):
if self._connected:
raise PipeError('already connected')
self._connect_result = Result()
try:
self._handle.connect(target, self.__connect_cb)
except pyuv.error.PipeError as e:
raise PipeError(convert_errno(e.args[0]), e.args[1])
try:
self._connect_result.wait()
except PipeError:
self.close()
raise
else:
self._set_connected()
finally:
self._connect_result = None
class PipeClient(PipeStream):
def __init__(self):
loop = evergreen.current.loop
handle = pyuv.Pipe(loop._loop)
super(PipeClient, self).__init__(handle)
self._connect_result = None
def connect(self, target):
if self._connected:
raise PipeError('already connected')
self._connect_result = Result()
try:
self._handle.connect(target, self.__connect_cb)
except pyuv.error.PipeError as e:
raise PipeError(convert_errno(e.args[0]), e.args[1])
try:
self._connect_result.wait()
except PipeError:
self.close()
raise
else:
self._set_connected()
finally:
self._connect_result = None
def __connect_cb(self, handle, error):
if error is not None:
self._connect_result.set_exception(PipeError(convert_errno(error), pyuv.errno.strerror(error)))
else:
self._connect_result.set_result(None)
def connect(self, target):
if self._connected:
raise PipeError('already connected')
connect_result = Result()
def cb(handle, error):
if error is not None:
connect_result.set_exception(PipeError(convert_errno(error), pyuv.errno.strerror(error)))
else:
connect_result.set_result(None)
try:
self._handle.connect(target, cb)
except pyuv.error.PipeError as e:
raise PipeError(convert_errno(e.args[0]), e.args[1])
try:
connect_result.wait()
except PipeError:
self.close()
raise
else:
self._set_connected()
def connect(self, target, source_address=None):
if self._connected:
raise TCPError('already connected')
# TODO: getaddrinfo
if source_address:
try:
self._handle.bind(source_address)
except pyuv.error.TCPError as e:
raise TCPError(e.args[0], e.args[1])
try:
self._handle.connect(target, self.__connect_cb)
except pyuv.error.TCPError as e:
raise TCPError(e.args[0], e.args[1])
self._connect_result = Result()
try:
self._connect_result.wait()
except TCPError:
self.close()
raise
else:
self._set_connected()
finally:
self._connect_result = None
def connect(self, target, source_address=None):
if self._connected:
raise TCPError('already connected')
# TODO: getaddrinfo
if source_address:
try:
self._handle.bind(source_address)
except pyuv.error.TCPError as e:
raise TCPError(e.args[0], e.args[1])
try:
self._handle.connect(target, self.__connect_cb)
except pyuv.error.TCPError as e:
raise TCPError(e.args[0], e.args[1])
self._connect_result = Result()
try:
self._connect_result.wait()
except TCPError:
self.close()
raise
else:
self._set_connected()
finally:
self._connect_result = None
class TCPClient(TCPStream):
def __init__(self):
loop = evergreen.current.loop
handle = pyuv.TCP(loop._loop)
super(TCPClient, self).__init__(handle)
self._connect_result = None
def connect(self, target, source_address=None):
if self._connected:
raise TCPError('already connected')
# TODO: getaddrinfo
if source_address:
try:
self._handle.bind(source_address)
except pyuv.error.TCPError as e:
raise TCPError(e.args[0], e.args[1])
try:
self._handle.connect(target, self.__connect_cb)
except pyuv.error.TCPError as e:
raise TCPError(e.args[0], e.args[1])
self._connect_result = Result()
try:
self._connect_result.wait()
except TCPError:
self.close()
raise
else:
self._set_connected()
finally:
self._connect_result = None
def __connect_cb(self, handle, error):
if error is not None:
self._connect_result.set_exception(TCPError(error, pyuv.errno.strerror(error)))
else:
self._connect_result.set_result(None)
class TCPClient(TCPStream):
def __init__(self):
loop = evergreen.current.loop
handle = pyuv.TCP(loop._loop)
super(TCPClient, self).__init__(handle)
self._connect_result = None
def connect(self, target, source_address=None):
if self._connected:
raise TCPError('already connected')
# TODO: getaddrinfo
if source_address:
try:
self._handle.bind(source_address)
except pyuv.error.TCPError as e:
raise TCPError(e.args[0], e.args[1])
try:
self._handle.connect(target, self.__connect_cb)
except pyuv.error.TCPError as e:
raise TCPError(e.args[0], e.args[1])
self._connect_result = Result()
try:
self._connect_result.wait()
except TCPError:
self.close()
raise
else:
self._set_connected()
finally:
self._connect_result = None
def __connect_cb(self, handle, error):
if error is not None:
self._connect_result.set_exception(
TCPError(error, pyuv.errno.strerror(error)))
else:
self._connect_result.set_result(None)
def __init__(self, handle):
super(PipeStream, self).__init__()
self._handle = handle
self._read_result = Result()
class PipeStream(BaseStream):
error_class = PipeError
def __init__(self, handle):
super(PipeStream, self).__init__()
self._handle = handle
self._read_result = Result()
@property
def readable(self):
return self._handle.readable
@property
def writable(self):
return self._handle.writable
def _read(self, n):
try:
self._handle.start_read(self.__read_cb)
except pyuv.error.PipeError as e:
self.close()
raise PipeError(convert_errno(e.args[0]), e.args[1])
try:
data = self._read_result.wait()
except PipeError as e:
self.close()
raise
else:
if not data:
self.close()
return
self._read_buffer.feed(data)
finally:
self._read_result.clear()
def _write(self, data):
try:
self._handle.write(data, self.__write_cb)
except pyuv.error.PipeError as e:
self.close()
raise PipeError(convert_errno(e.args[0]), e.args[1])
def _close(self):
self._handle.shutdown(self.__shutdown_cb)
def __read_cb(self, handle, data, error):
self._handle.stop_read()
if error is not None:
if error != pyuv.errno.UV_EOF:
self._read_result.set_exception(PipeError(convert_errno(error), pyuv.errno.strerror(error)))
else:
self._read_result.set_result(b'')
else:
self._read_result.set_result(data)
def __write_cb(self, handle, error):
if error is not None:
# TODO: save error?
self.close()
def __shutdown_cb(self, handle, error):
self._handle.close()
def __init__(self, fd, readable):
super(TTYStream, self).__init__()
loop = evergreen.current.loop
self._handle = pyuv.TTY(loop._loop, fd, readable)
self._read_result = Result()
self._set_connected()
class TTYStream(BaseStream):
error_class = TTYError
def __init__(self, fd, readable):
super(TTYStream, self).__init__()
loop = evergreen.current.loop
self._handle = pyuv.TTY(loop._loop, fd, readable)
self._read_result = Result()
self._set_connected()
@property
def readable(self):
return self._handle.readable
@property
def writable(self):
return self._handle.writable
@property
def winsize(self):
return self._handle.get_winsize()
def set_mode(self, raw):
self._handle.set_mode(raw)
def _read(self, n):
try:
self._handle.start_read(self.__read_cb)
except pyuv.error.TTYError as e:
self.close()
raise TTYError(e.args[0], e.args[1])
try:
data = self._read_result.wait()
except TTYError as e:
self.close()
raise
else:
if not data:
self.close()
return
self._read_buffer.feed(data)
finally:
self._read_result.clear()
def _write(self, data):
try:
self._handle.write(data, self.__write_cb)
except pyuv.error.TTYError as e:
self.close()
raise TTYError(e.args[0], e.args[1])
def _close(self):
self._handle.close()
def __read_cb(self, handle, data, error):
self._handle.stop_read()
if error is not None:
if error != pyuv.errno.UV_EOF:
self._read_result.set_exception(TTYError(error, pyuv.errno.strerror(error)))
else:
self._read_result.set_result(b'')
else:
self._read_result.set_result(data)
def __write_cb(self, handle, error):
if error is not None:
# TODO: store error?
self.close()
def __init__(self, fd, readable):
super(TTYStream, self).__init__()
loop = evergreen.current.loop
self._handle = pyuv.TTY(loop._loop, fd, readable)
self._read_result = Result()
self._set_connected()
class TTYStream(BaseStream):
error_class = TTYError
def __init__(self, fd, readable):
super(TTYStream, self).__init__()
loop = evergreen.current.loop
self._handle = pyuv.TTY(loop._loop, fd, readable)
self._read_result = Result()
self._set_connected()
@property
def readable(self):
return self._handle.readable
@property
def writable(self):
return self._handle.writable
@property
def winsize(self):
return self._handle.get_winsize()
def set_mode(self, raw):
self._handle.set_mode(raw)
def _read(self, n):
try:
self._handle.start_read(self.__read_cb)
except pyuv.error.TTYError as e:
self.close()
raise TTYError(e.args[0], e.args[1])
try:
data = self._read_result.wait()
except TTYError as e:
self.close()
raise
else:
if not data:
self.close()
return
self._read_buffer.feed(data)
finally:
self._read_result.clear()
def _write(self, data):
try:
self._handle.write(data, self.__write_cb)
except pyuv.error.TTYError as e:
self.close()
raise TTYError(e.args[0], e.args[1])
def _close(self):
self._handle.close()
def __read_cb(self, handle, data, error):
self._handle.stop_read()
if error is not None:
if error != pyuv.errno.UV_EOF:
self._read_result.set_exception(
TTYError(error, pyuv.errno.strerror(error)))
else:
self._read_result.set_result(b'')
else:
self._read_result.set_result(data)
def __write_cb(self, handle, error):
if error is not None:
# TODO: store error?
self.close()