def _init_hbadict(self):
if not hasattr(self, "hbas"):
dict = devscan.adapters(filterstr=self.type)
self.hbadict = dict['devs']
self.hbas = dict['adt']
if len(self.hbas):
self.attached = True
self.devs = scsiutil.cacheSCSIidentifiers()
def _init_hbadict(self):
if not hasattr(self, "hbas"):
dict = devscan.adapters(filterstr=self.type)
self.hbadict = dict['devs']
self.hbas = dict['adt']
if len(self.hbas.iterkeys()):
self.attached = True
self.devs = scsiutil.cacheSCSIidentifiers()
def _init_adapters(self):
# Generate a list of active adapters
ids = scsiutil._genHostList(ISCSI_PROCNAME)
util.SMlog(ids)
self._adapter = {}
for host in ids:
try:
targetIQN = iscsilib.get_targetIQN(host)
if targetIQN != self.targetIQN:
continue
(addr, port) = iscsilib.get_targetIP_and_port(host)
entry = "%s:%s" % (addr, port)
self._adapter[entry] = host
except:
pass
self._devs = scsiutil.cacheSCSIidentifiers()
def _init_adapters(self):
# Generate a list of active adapters
ids = scsiutil._genHostList(ISCSI_PROCNAME)
util.SMlog(ids)
self.adapter = {}
for host in ids:
try:
targetIQN = iscsilib.get_targetIQN(host)
if targetIQN != self.targetIQN:
continue
(addr, port) = iscsilib.get_targetIP_and_port(host)
entry = "%s:%s" % (addr,port)
self.adapter[entry] = host
except:
pass
self.devs = scsiutil.cacheSCSIidentifiers()
def attach(self, sr_uuid, vdi_uuid):
# Perform a device scan for all paths, to check for any LUN resize
scsi_id = self.sm_config['SCSIid']
devices = scsiutil._genReverseSCSIidmap(scsi_id)
xapi_session = self.session.xenapi
# At the vdi attach stage if devices are not found against the scsi_id,
# the two reasons would be 1. The machine is slave on which a bus scan
# was not performed, perform a bus scan to rectify the same. 2. Genuine
# HBA bus error, throw an error back.
if len(devices) == 0:
devscan.adapters()
devices = scsiutil._genReverseSCSIidmap(scsi_id)
# If no devices are found after a bus rescan, flag an error
if len(devices) == 0:
raise xs_errors.XenError('InvalidDev', \
opterr=('No HBA Device detected with SCSI Id[%s]') % scsi_id)
# Run a query on devices against the scsi id to refresh the size
dev_lun_info = scsiutil.cacheSCSIidentifiers()
for dev in devices:
self._query(dev, dev_lun_info[dev][4], vdi_uuid)
#Update xapi with the new size
vdi_ref = self.sr.session.xenapi.VDI.get_by_uuid(vdi_uuid)
self.sr.session.xenapi.VDI.set_virtual_size(vdi_ref, str(self.size))
# Multipath enable
if self.sr.mpath == "true":
self.sr.mpathmodule.refresh(scsi_id, len(devices))
self.path = self.sr.mpathmodule.path(scsi_id)
# The SCSIid is already stored inside SR sm_config.
# We need only to trigger mpathcount
try:
cmd = ['/opt/xensource/sm/mpathcount.py', scsi_id]
util.pread2(cmd)
except:
util.SMlog("RawHBA: something wrong with mpathcount")
ret = VDI.VDI.attach(self, sr_uuid, vdi_uuid)
self.sr.update_stats(self.size)
return ret
def attach(self, sr_uuid, vdi_uuid):
# Perform a device scan for all paths, to check for any LUN resize
scsi_id = self.sm_config['SCSIid']
devices = scsiutil._genReverseSCSIidmap(scsi_id)
xapi_session = self.session.xenapi
# At the vdi attach stage if devices are not found against the scsi_id,
# the two reasons would be 1. The machine is slave on which a bus scan
# was not performed, perform a bus scan to rectify the same. 2. Genuine
# HBA bus error, throw an error back.
if len(devices) == 0:
devscan.adapters()
devices = scsiutil._genReverseSCSIidmap(scsi_id)
# If no devices are found after a bus rescan, flag an error
if len(devices) == 0:
raise xs_errors.XenError('InvalidDev', \
opterr=('No HBA Device detected with SCSI Id[%s]') % scsi_id)
# Run a query on devices against the scsi id to refresh the size
dev_lun_info = scsiutil.cacheSCSIidentifiers()
for dev in devices:
self._query(dev, dev_lun_info[dev][4], vdi_uuid)
#Update xapi with the new size
vdi_ref = self.sr.session.xenapi.VDI.get_by_uuid(vdi_uuid)
self.sr.session.xenapi.VDI.set_virtual_size(vdi_ref, str(self.size))
# Multipath enable
if self.sr.mpath == "true":
self.sr.mpathmodule.refresh(scsi_id, len(devices))
self.path = self.sr.mpathmodule.path(scsi_id)
# The SCSIid is already stored inside SR sm_config.
# We need only to trigger mpathcount
try:
cmd = [os.path.join(constants.SM_DEST, 'mpathcount.py'), scsi_id]
util.pread2(cmd)
except:
util.SMlog("RawHBA: something wrong with mpathcount")
ret = VDI.VDI.attach(self, sr_uuid, vdi_uuid)
self.sr.update_stats(self.size)
return ret
def _init_adapters(self):
# Generate a list of active adapters
ids = scsiutil._genHostList(ISCSI_PROCNAME)
util.SMlog(ids)
self.adapter = {}
for host in ids:
try:
targetIQN = util.get_single_entry(glob.glob(\
'/sys/class/iscsi_host/host%s/device/session*/iscsi_session*/targetname' % host)[0])
if targetIQN != self.targetIQN:
continue
addr = util.get_single_entry(glob.glob(\
'/sys/class/iscsi_host/host%s/device/session*/connection*/iscsi_connection*/persistent_address' % host)[0])
port = util.get_single_entry(glob.glob(\
'/sys/class/iscsi_host/host%s/device/session*/connection*/iscsi_connection*/persistent_port' % host)[0])
entry = "%s:%s" % (addr,port)
self.adapter[entry] = host
except:
pass
self.devs = scsiutil.cacheSCSIidentifiers()
def _init_adapters(self):
# Generate a list of active adapters
ids = scsiutil._genHostList(ISCSI_PROCNAME)
util.SMlog(ids)
self.adapter = {}
for host in ids:
try:
targetIQN = util.get_single_entry(glob.glob(\
'/sys/class/iscsi_host/host%s/device/session*/iscsi_session*/targetname' % host)[0])
if targetIQN != self.targetIQN:
continue
addr = util.get_single_entry(glob.glob(\
'/sys/class/iscsi_host/host%s/device/session*/connection*/iscsi_connection*/persistent_address' % host)[0])
port = util.get_single_entry(glob.glob(\
'/sys/class/iscsi_host/host%s/device/session*/connection*/iscsi_connection*/persistent_port' % host)[0])
entry = "%s:%s" % (addr, port)
self.adapter[entry] = host
except:
pass
self.devs = scsiutil.cacheSCSIidentifiers()
def _genMPPHBA(id):
devs = scsiutil.cacheSCSIidentifiers()
mppdict = {}
for dev in devs:
item = devs[dev]
if item[1] == id:
arr = scsiutil._genArrayIdentifier(dev)
if not len(arr):
continue
try:
cmd = ['/usr/sbin/mppUtil', '-a']
for line in util.doexec(cmd)[1].split('\n'):
if line.find(arr) != -1:
rec = line.split()[0]
cmd2 = ['/usr/sbin/mppUtil', '-g',rec]
li = []
for newline in util.doexec(cmd2)[1].split('\n'):
if newline.find('hostId') != -1:
li.append(_parseHostId(newline))
mppdict[dev.split('/')[-1]] = li
except:
continue
return mppdict