The larger and innermost of the two natural satellites of Mars, Phobos is the embedded system that controls the static (fixed-base) bicycle simulator and steer-by-wire bicycle.

To compile the code, use GNU ARM Embedded toolchain. The version used is 5.4-2016-q2.

Some examples may not build as the option -fsingle-precision-constant is not standard compliant. The issue is documented here and contains a fix.

As most computers will be running a 64-bit kernel, libraries for ia32/i386 architecture will need to be installed if not already. For recent versions of Ubuntu, this can be installed with the gcc-multilib package.

The only dependency required for building is protobuf. The protobuf libraries, compiler, and python bindings must be installed. On macOS this can be done with brew.

oliver@canopus:~$ brew install protobuf --with-test

If you primarily use Python 3, a different compiler must be used to build the protobuf libraries, compiler, python bindings, the python binding compilation will fail with apple clang and the same compiler must be used to build all components. Assuming you want to use gcc-7, this can be done in brew with

oliver@canopus:~$ brew install --cc=gcc-7 protobuf --with-test --with-python3

or by defining the environment variables CC=gcc-7 CXX=g++-7 if building from source.

On Ubuntu, this can be installed from the official repositories

mick@MOBISTORM-UBUNTU:~$ sudo apt-get install libprotobuf-dev protobuf-compiler python-protobuf

As this project is dependent on a number of git submodules, as well as nested submodules, they should be initialized when the repository is first cloned.

oliver@canopus:~/repos/phobos$ git submodule update --init --recursive --recommend-shallow

When creating the CMake build tree, the compiler must be set to the target toolchain to allow cross-compilation. CMake cannot change the compiler after the build tree has been created and if the toolchain is not provided, the default compiler will be used. The path to the toolchain must be defined in a CMake script file and passed as in the argument CMAKE_TOOLCHAIN_FILE the first time cmake is called. An example file is provided in the root project directory.

oliver@canopus:~/repos/phobos$ mkdir build
oliver@canopus:~/repos/phobos$ cd build/
oliver@canopus:~/repos/phobos/build$ cmake -DCMAKE_TOOLCHAIN_FILE=~/toolchain/toolchain-gcc-arm-none-eabi-5_4-2016q2.cmake ..
oliver@canopus:~/repos/phobos/build$ make -j8

Build options can be passed as arguments to cmake or set with ccmake after the build tree has been created.

oliver@canopus:~/repos/phobos/build$ ccmake .

The compiled ELF can be flashed to the microcontroller by enabling the OPENOCD_FLASH_TARGET or OPENOCD_FLASH_AND_RUN_TARGET CMake options.

If you are running macOS and unable to flash successfully with CMake, OpenOCD may be requesting to receive incoming network connections. This can be done by signing the application:

oliver@canopus:~$ codesign --verify -vv /usr/local/Cellar/open-ocd/HEAD/bin/openocd

In 'Security & Privacy', verify that the option 'Automatically allow signed software to receive incoming connections' is enabled.

Most of the demos blink the board LED when running. Most demos also send ASCII over serial and increase the blink rate of the LED when a USB connection is established. The exception is the FATFS demo as use the SDIO uses a same pin as USB so both peripherals cannot be used at once. The transmitted characters can be viewed using any serial terminal program. Here's an example using screen

oliver@canopus:~$ screen /dev/tty.usbmodem311

As a virtual serial port is established, baud rate is ignored and has no impact on USB transfer speed. The serial data can also be logged to file with screen

oliver@canopus:~$ screen -L /dev/tty.usbmodem311

Using screen to log serial data to file can occasionally result in missing bytes. In this case, seriallog in the tools directory can be used to log to file.

On linux, add yourself to the dialout group so that you can access the serial device, usually /dev/ttyACM0.

sudo usermod --append --groups dialout $USER

Some projects output serial data just as bytes (not ASCII). Cutecom can be used to view the data as hex. You can download it here. If you used homebrew to install Qt4, Qt3 support will be missing. You can reinstall Qt4 with the following option to enable support

oliver@canopus:~$ brew reinstall qt --with-qt3support

The projects in this repository are designed to run on an Olimex STM32-H405 microcontroller together with a set of PCBs (v0.1) in order to interface with a number of sensors and actuators. When using the PCBs, please make sure to check the errata in the project README.

Windows users may need to install STMicroelectronics Virtual COM Port driver 1.3.1.

The microcontroller can be debugged with OpenOCD and GDB.

oliver@canopus:~/repos/phobos$ openocd -f openocd_olimex-arm-usb-tiny-h_stm32f4.cfg

In another shell instance, pass GDB the ELF as an argument

oliver@canopus:~/repos/phobos/build$ ~/toolchain/gcc-arm-none-eabi-5_4-2016q2/bin/arm-none-eabi-gdb-py demos/usb_serial/usb-serial.elf

To connect to target

(gdb) target extended-remote localhost:3333

Additionally, the ELF can be flashed

(gdb) load
(gdb) mon reset init

There is an example gdbinit file in the root directory that defines a command to connect to the remote and set hardware break/watch point limits in addition to disabling IRQs while stepping. This can be used by renaming the file to .gdbinit and placing in your home or project directory or by executing GDB commands from a file when starting GDB

oliver@canopus:~/repos/phobos/build$ ~/toolchain/gcc-arm-none-eabi-5_4-2016q2/bin/arm-none-eabi-gdb-py -x ../gdbinit demos/usb_serial/usb-serial.elf

If the sample gdbinit file is used, the gdb binary arm-none-eabi-gdb-py (with python scripting enabled) must also be used.

In some cases when debugging, Link Time Optimization will remove necessary debug information (such as Eigen Matrix template arguments). You may wish to disable LTO (CMake option CHIBIOS_USE_LTO) in these cases.

Eclipse can also be used for debugging and can be downloaded here. With the use of plugins, it is much easier to read register values and view thread status and stack usage.

For general instructions refer to the ChibiOS/Eclipse guides part 1 and part 2.

• Install the Eclipse IDE for C/C++ Developers. You probably need the JDK which can be found here.
• Create an Eclipse project with CMake: (don't include the linebreak)
  oliver@canopus:~/repos/phobos/build-eclipse$ cmake -G"Eclipse CDT4 - Unix Makefiles" -DCMAKE_TOOLCHAIN_FILE=../toolchain-gcc-arm-none-eabi-5_4-2016q2.cmake ..
  Don't forget to set build type to 'Debug' and enable ChibiOS debug options.
• In Eclipse, import the project using 'File->Import'.
  Select 'General->Existing Projects into Workspace'.
  Set 'Select root directory:' to the previously used build directory and select the project.
• In 'Project->Properties', 'C/C++ Make Project->Binary Parser', select 'GNU Elf Parser'.
• OpenOCD can be configured as an external tool.
  Provide the location of the binary, set the working directory to be
  ${workspace_loc:/PHOBOS-Debug@build-eclipse} and set arguments to
  -f ../openocd_olimex-arm-usb-tiny-h_stm32f4.cfg

• 'C/C++ GDB Hardware Debugging' can be found in the 'Mobile and Device Development' category of available software.
• 'EmbSysRegView' can be found in 'Help->Eclipse Marketplace'.
• Copy ChibiOS jar files found in eclipse/dropins to the Eclipse dropins directory. For macOS, this is located at /Applications/Eclipse.app/Contents/Eclipse/dropins/

Most demos and projects will print ASCII output using serial over USB and blink the LED to denote that the code is running. A brief description of each executable is given below:

+-- demos
|   +-- adc             - Reads ADC channels ADC10, ADC11, ADC12.
|   +-- bicycle         - Simulates the Whipple model with Kalman filter and prints state and auxiliary state.
|   +-- dac             - Outputs new DAC values at 1 kHz with large steps between each value.
|   +-- eigen           - Performs matrix multiplication and matrix element rescaling.
|   +-- encoder         - Activates incremental encoder with 15200 counts per revolution.
|   +-- encoder_hots    - Activates incremental encoder with 15200 counts per revolution using Higher-Order Time-Sampling.
|   +-- encoder_index   - Activates incremental encoder with 15200 counts per revolution and index channel.
|   +-- fatfs           - Writes and reads data to file on micro SD card.
|   +-- gpt_adc         - Reads ADC channels ADC10, ADC11, ADC12 and uses GPT triggering.
|   +-- pwm_encoder     - Activates 2 PWM channels 1/4 period of of phase and an incremental encoder.
|   +-- usb_serial      - Runs ChibiOS usb-serial demo and runs tests.
|
+-- projects
|   +-- clustril        - Runs development static simulator code. Requires usage of SDIO which prevents usage of serial over USB.
|   +-- drunlo          - Prints sensor values as ASCII. Requires usage of serial over USB.
|   +-- flimnap         - Runs static simulator code interfacing with Unity environment [phobos-visualizer](https://gitlab.com/bikelab/phobos-visualizer). Cannot log data via SDIO.
|   +-- gulliver        - Prints realtime counter and steer encoder count. Used for determining steering column inertia. Transmits value as ASCII using serial over USB.
|   +-- hall            - Prints realtime counter and torque values in adc counts. Analog sample speed is increased to 8 kHz for this project. Used for determining torque scaling values. Transmits value as ASCII using serial over USB.
|
+-- tools
    +-- pbprint         - Decodes messages received over a serial connection and prints them in text format.
    +-- seriallog       - Reads bytes from a serial port and writes them to a file.