pycomm is a package that includes a collection of modules used to communicate with PLCs. At the moment the first module in the package is ab_comm.
The library is currently test on Python 2.6, 2.7.
- Library is basically tested on python3.5 for SLC parts:
- Open a connection
- Read Tag
- Close the connection
(write_tag is updated to python3 but it's not tested)
The package can be installed from
GitHub: :
git clone https://github.com/ruscito/pycomm.git
cd pycomm
sudo python setup.py installPyPi: :
pip install pycommab_comm is a module that contains a set of classes used to interface Rockwell PLCs using Ethernet/IP protocol. The "clx" class can be used to communicate with Compactlogix, Controllogix PLCs The "slc" can be used to communicate with Micrologix or SLC PLCs
I tried to followCIP specifications volume 1 and 2 as well as Rockwell Automation Publication 1756-PM020-EN-P - November 2012 .
See the following snippet for communication with a Controllogix PLC:
from pycomm.ab_comm.clx import Driver as ClxDriver
import logging
if __name__ == '__main__':
logging.basicConfig(
filename="ClxDriver.log",
format="%(levelname)-10s %(asctime)s %(message)s",
level=logging.DEBUG
)
c = ClxDriver()
if c.open('172.16.2.161'):
print(c.read_tag(['ControlWord']))
print(c.read_tag(['parts', 'ControlWord', 'Counts']))
print(c.write_tag('Counts', -26, 'INT'))
print(c.write_tag(('Counts', 26, 'INT')))
print(c.write_tag([('Counts', 26, 'INT')]))
print(c.write_tag([('Counts', -26, 'INT'), ('ControlWord', -30, 'DINT'), ('parts', 31, 'DINT')]))
# To read an array
r_array = c.read_array("TotalCount", 1750)
for tag in r_array:
print (tag)
# To read string
c.write_string('TEMP_STRING', 'my_value')
c.read_string('TEMP_STRING')
# reset tha array to all 0
w_array = []
for i in xrange(1750):
w_array.append(0)
c.write_array("TotalCount", w_array, "SINT")
c.close()See the following snippet for communication with a Micrologix PLC:
from pycomm.ab_comm.slc import Driver as SlcDriver
import logging
if __name__ == '__main__':
logging.basicConfig(
filename="SlcDriver.log",
format="%(levelname)-10s %(asctime)s %(message)s",
level=logging.DEBUG
)
c = SlcDriver()
if c.open('172.16.2.160'):
print c.read_tag('S:1/5')
print c.read_tag('S:60', 2)
print c.write_tag('N7:0', [-30, 32767, -32767])
print c.write_tag('N7:0', 21)
print c.read_tag('N7:0', 10)
print c.write_tag('F8:0', [3.1, 4.95, -32.89])
print c.write_tag('F8:0', 21)
print c.read_tag('F8:0', 3)
print c.write_tag('B3:100', [23, -1, 4, 9])
print c.write_tag('B3:100', 21)
print c.read_tag('B3:100', 4)
print c.write_tag('T4:3.PRE', 431)
print c.read_tag('T4:3.PRE')
print c.write_tag('C5:0.PRE', 501)
print c.read_tag('C5:0.PRE')
print c.write_tag('T4:3.ACC', 432)
print c.read_tag('T4:3.ACC')
print c.write_tag('C5:0.ACC', 502)
print c.read_tag('C5:0.ACC')
c.write_tag('T4:2.EN', 0)
c.write_tag('T4:2.TT', 0)
c.write_tag('T4:2.DN', 0)
print c.read_tag('T4:2.EN', 1)
print c.read_tag('T4:2.TT', 1)
print c.read_tag('T4:2.DN',)
c.write_tag('C5:0.CU', 1)
c.write_tag('C5:0.CD', 0)
c.write_tag('C5:0.DN', 1)
c.write_tag('C5:0.OV', 0)
c.write_tag('C5:0.UN', 1)
c.write_tag('C5:0.UA', 0)
print c.read_tag('C5:0.CU')
print c.read_tag('C5:0.CD')
print c.read_tag('C5:0.DN')
print c.read_tag('C5:0.OV')
print c.read_tag('C5:0.UN')
print c.read_tag('C5:0.UA')
c.write_tag('B3:100', 1)
print c.read_tag('B3:100')
c.write_tag('B3/3955', 1)
print c.read_tag('B3/3955')
c.write_tag('N7:0/2', 1)
print c.read_tag('N7:0/2')
print c.write_tag('O:0.0/4', 1)
print c.read_tag('O:0.0/4')
c.close()This package is under development. The modules _ab_comm.clx and _ab_comm.slc are completed at moment but other drivers will be added in the future.
Thanks to patrickjmcd for the help with the Direct Connections and thanks in advance to anyone for feedback and suggestions.
pycomm is distributed under the MIT License