def start(self):
dir = self.opts("dir")
if not os.path.exists(dir):
os.makedirs(dir)
h1 = Host("10.0.1.1")
h2 = Host("10.0.1.2")
hlist = HostList(h1, h2)
self.hlist = hlist
n = self.opts("n")
hlist.rmmod()
hlist.remove_qdiscs()
if self.opts("enable"):
hlist.insmod()
else:
# Rate limit second host to just the aggregate rate
h2.insmod()
h2.perfiso_set("ISO_MAX_TX_RATE", self.opts("rate"))
h2.perfiso_set("ISO_RFAIR_INITIAL", self.opts("rate"))
h1.perfiso_set("ISO_VQ_DRAIN_RATE_MBPS", self.opts('rate'))
h1.perfiso_set("ISO_VQ_UPDATE_INTERVAL_US", self.opts("vqupdate"))
if True:
# Only for QCN tests
perrate = int(self.opts("rate")) / n
dt_qcn = min(1200, 100 * 1500 * 8 / perrate)
hlist.perfiso_set("ISO_RFAIR_INCREASE_INTERVAL_US", dt_qcn)
hlist.perfiso_set("ISO_RFAIR_DECREASE_INTERVAL_US", dt_qcn)
# Create all IP routes etc.
for i in xrange(n):
hlist.create_ip_tenant(i+1)
hlist.setup_tenant_routes(self.opts("n"))
h1.start_monitors(self.opts("dir"))
# Start iperf server
iperf = Iperf({'-p': 5001})
self.procs.append(iperf.start_server(h1))
sleep(1)
# Start all iperf clients
for i in xrange(n):
parallel = 4
iperf = Iperf({'-p': 5001,
'-P': parallel,
'-i': '1',
'-c': h1.get_tenant_ip(i+1),
'-B': h2.get_tenant_ip(i+1),
'dir': os.path.join(self.opts("dir"), "iperf"),
'-t': self.opts('t')})
self.procs.append(iperf.start_client(h2))
if self.opts("profile"):
self.h1 = h1
h1.start_profile(dir=self.opts("profile"))
def start(self):
h1 = Host("10.0.1.1")
h2 = Host("10.0.1.2")
hlist = HostList(h1, h2)
self.hlist = hlist
n = self.opts('n')
hlist.rmmod()
hlist.remove_qdiscs()
hlist.insmod()
hlist.prepare_iface()
# VQ drain rate
h1.perfiso_set("ISO_VQ_DRAIN_RATE_MBPS", self.opts('rate'))
h1.perfiso_set("ISO_VQ_UPDATE_INTERVAL_US", "25")
# Create vq class
self.log("Creating vq classes")
for i in xrange(n):
hlist.create_ip_tenant(i+1)
h1.start_monitors(self.opts('dir'))
hlist.setup_tenant_routes(n)
self.log("Starting %d iperfs" % n)
# Start iperfs servers
for i in xrange(n):
parallel = 4
iperf = Iperf({'-p': 5001,
'-P': parallel})
server = iperf.start_server(h1)
self.procs.append(server)
self.log("server %d" % i)
sleep(1)
for i in xrange(n):
iperf = Iperf({'-p': 5001,
'-P': parallel,
'-c': h1.get_tenant_ip(i+1),
'-t': self.opts('t')})
client = iperf.start_client(h2)
self.procs.append(client)
self.log("client %d" % i)
if self.opts("profile"):
h1.start_profile(dir=self.opts("profile"))
self.h1 = h1
def start(self):
h1 = Host("10.0.1.1")
h2 = Host("10.0.1.2")
hlist = HostList(h1, h2)
self.hlist = hlist
n = self.opts('n')
hlist.rmmod()
hlist.remove_qdiscs()
n = self.opts('n')
hlist.prepare_iface()
# Insert the module only in the second host
h2.insmod()
h2.perfiso_set("ISO_MAX_TX_RATE", self.opts("rate"))
h2.perfiso_set("ISO_RFAIR_INITIAL", self.opts('rate'))
# Create vq class
# First host doesn't have module loaded
ip = h2.get_10g_ip()
h2.perfiso_create_txc(ip)
h1.start_monitors(self.opts('dir'))
if not self.opts("profile"):
h1.start_perf_monitor(self.opts("dir"), self.opts('t'))
self.log("Starting %d iperfs" % n)
# Start same number of iperf servers
for i in xrange(n):
parallel = 4
iperf = Iperf({'-p': 5001,
'-P': parallel})
server = iperf.start_server(h1)
self.procs.append(server)
sleep(1)
for i in xrange(n):
iperf = Iperf({'-p': 5001,
'-P': parallel,
'-c': h1.get_10g_ip(),
'-t': self.opts('t')})
client = iperf.start_client(h2)
self.procs.append(client)
def start(self):
h1 = Host("10.0.1.1")
h2 = Host("10.0.1.2")
hlist = HostList(h1, h2)
self.hlist = hlist
n = self.opts('n')
hlist.cmd("rmmod newrl")
hlist.remove_qdiscs()
hlist.configure_rps()
n = self.opts('n')
if self.opts("rl") == "newrl":
dev = h1.get_10g_dev()
rate = self.opts("rate")
h1.cmd("insmod ~/vimal/exports/newrl.ko rate=%s dev=%s" % (rate, dev))
else:
# insert htb qdiscs in hierarchy
dev = h1.get_10g_dev()
ceil = '%sGbit' % (int(self.opts('rate')) / 1000)
cmd = "tc qdisc add dev %s root handle 1: htb default 1" % dev
h1.cmd(cmd)
cmd = "tc class add dev %s classid 1:1 parent 1: htb" % dev
cmd += " rate %s ceil %s mtu 64000" % (ceil, ceil)
h1.cmd(cmd)
h1.start_monitors(self.opts("dir"))
# Start iperf server
iperf = Iperf({'-p': 5001})
self.procs.append(iperf.start_server(h2))
sleep(1)
# Start all iperf clients
iperf = Iperf({'-p': 5001,
'-P': self.opts("P"),
'-i': '10',
'-c': h2.get_10g_ip(),
'dir': os.path.join(self.opts("dir"), "iperf"),
'-t': self.opts('t')})
self.procs.append(iperf.start_client(h1))
if self.opts("profile"):
self.h1 = h1
h1.start_profile(dir=self.opts("profile"))
return
def start(self):
h1 = Host("10.0.1.1")
h2 = Host("10.0.1.2")
h3 = Host("10.0.1.3")
dev="eth2"
self.hlist = HostList(h1, h2, h3)
hlist = self.hlist
h1.prepare_iface()
h2.prepare_iface()
h3.prepare_iface()
hlist.rmmod()
hlist.ipt_ebt_flush()
if self.opts("enabled"):
hlist.insmod()
self.log("Creating a single UDP tenant")
h1.create_udp_tenant(server_ports=[5001], tid=1)
h1.create_udp_tenant(server_ports=[5002], tid=1)
h2.create_udp_tenant(server_ports=[5001], tid=1)
h3.create_udp_tenant(server_ports=[5002], tid=1)
h1.perfiso_set("IsoAutoGenerateFeedback", "1")
h1.perfiso_set("ISO_FEEDBACK_INTERVAL_US", 100)
h1.perfiso_set("ISO_VQ_DRAIN_RATE_MBPS", 5000)
#hlist.perfiso_set("ISO_VQ_MAX_BYTES", 50 * 1024)
#hlist.perfiso_set("ISO_MAX_BURST_TIME_US", 500)
#hlist.perfiso_set("ISO_VQ_MARK_THRESH_BYTES", 25 * 1024)
hlist.start_monitors(self.opts("dir"))
self.procs = []
# Start iperf servers
for p in [5001, 5002]:
opts = {'-p': p, '-u': True}
iperf = Iperf(opts)
server = iperf.start_server(h1)
self.procs.append(server)
# Start 32 UDP from h2 to h1
client = Iperf({'-p': 5001,
'-c': h1.get_10g_ip(),
'-t': self.opts("t"),
'-b': '3G',
'-P': 32})
client = client.start_client(h2)
self.procs.append(client)
# Start 32 UDP from h3 to h1
client = Iperf({'-p': 5002,
'-c': h1.get_10g_ip(),
'-t': self.opts("t"),
'-b': '3G',
'-P': 32})
client = client.start_client(h3)
self.procs.append(client)
def start(self):
h1 = Host("10.0.1.1")
h2 = Host("10.0.1.2")
hlist = HostList(h1, h2)
self.hlist = hlist
n = self.opts('n')
hlist.rmmod()
hlist.remove_qdiscs()
hlist.configure_rps()
n = self.opts('n')
if self.opts("enable"):
h1.insmod()
h1.perfiso_set("ISO_MAX_TX_RATE", self.opts("rate"))
h1.perfiso_set("ISO_RFAIR_INITIAL", self.opts("rate"))
else:
# insert htb qdiscs in hierarchy
dev = h1.get_10g_dev()
ceil = '%sGbit' % (int(self.opts('rate')) / 1000)
cmd = "tc qdisc add dev %s root handle 1: htb default 1000" % dev
h1.cmd(cmd)
for i in xrange(n):
classid = 10+i
tip = h1.get_tenant_ip(i+1)
rate = "%.3f" % (float(self.opts("rate")) / n)
cmd = "tc class add dev %s parent 1: classid 1:%s " % (dev, classid)
cmd += "htb rate %sMbit ceil %s mtu 64000" % (rate, ceil)
h1.cmd(cmd)
cmd = 'tc filter add dev %s protocol ip parent 1: prio 1 ' % dev
cmd += " u32 match ip src %s flowid 1:%s " % (tip, classid)
h1.cmd(cmd)
for i in xrange(n):
#hlist.create_ip_tenant(i+1)
ip = h1.get_tenant_ip(i+1)
h1.perfiso_create_txc(ip)
h1.tenants.append(i+1)
h1.cmd("ifconfig %s:%d %s" % (h1.get_10g_dev(), i+1, ip))
h2.cmd("ifconfig %s:%d %s" % (h2.get_10g_dev(), i+1, h2.get_tenant_ip(i+1)))
hlist.setup_tenant_routes(n)
h1.start_monitors(self.opts("dir"))
# Start iperf server
iperf = Iperf({'-p': 5001})
self.procs.append(iperf.start_server(h2))
sleep(1)
# Start all iperf clients
for i in xrange(n):
parallel = 4
iperf = Iperf({'-p': 5001,
'-P': parallel,
'-i': '1',
'-c': h2.get_tenant_ip(i+1),
'dir': os.path.join(self.opts("dir"), "iperf"),
'-t': self.opts('t')})
self.procs.append(iperf.start_client(h1))
if self.opts("profile"):
self.h1 = h1
h1.start_profile(dir=self.opts("profile"))
return
def start(self):
h1 = Host("10.0.1.1")
h2 = Host("10.0.1.2")
hlist = HostList(h1, h2)
self.hlist = hlist
hlist.rmmod()
hlist.remove_qdiscs()
hlist.configure_rps()
n = self.opts('n')
hlist.prepare_iface()
direct=True
if self.opts('rl') == "perfiso":
hlist.insmod()
hlist.perfiso_set("ISO_VQ_DRAIN_RATE_MBPS", "11000")
hlist.perfiso_set("ISO_MAX_TX_RATE", self.opts("n") * self.opts('rate'))
hlist.perfiso_set("ISO_RFAIR_INITIAL", self.opts("n") * self.opts('rate'))
hlist.perfiso_set("ISO_TOKENBUCKET_TIMEOUT_NS", self.opts('timeout'))
h1.delay = True
h2.delay = True
for i in xrange(n):
#hlist.create_ip_tenant(i+1)
ip = h1.get_tenant_ip(i+1)
h1.perfiso_create_txc(ip)
h1.tenants.append(i+1)
if direct:
h1.cmd("ifconfig %s:%d %s" % (h1.get_10g_dev(), i+1, ip))
else:
h1.cmd("ifconfig br0:%d %s" % (i+1, ip))
#h2.create_ip_tenant(i+1)
h2.delay = True
h2.perfiso_create_txc(h2.get_tenant_ip(i+1))
h2.tenants.append(i+1)
if direct:
h2.cmd("ifconfig %s:%d %s" % (h2.get_10g_dev(), i+1, h2.get_tenant_ip(i+1)))
else:
h2.cmd("ifconfig br0:%d %s" % (i+1, h2.get_tenant_ip(i+1)))
hlist.delayed_cmds_execute()
else:
self.configure_qdisc(h1)
for i in xrange(n):
hlist.create_ip_tenant(i+1)
# Filter traffic to dest iperf port 5001+i to skb mark i+1
hlist.cmd("killall -9 iperf; iptables -F")
self.log("Starting CPU/bandwidth monitors")
self.hlist.start_monitors(self.opts("dir"))
h1.setup_tenant_routes()
self.log("Starting %d iperfs" % n)
# Start iperfs servers
parallel = self.opts("P")
iperf = Iperf({'-p': 5001,
'-P': parallel})
server = iperf.start_server(h2)
self.procs.append(server)
sleep(1)
cpu = -1
m = self.opts("m")
for i in xrange(n):
ip = h2.get_tenant_ip(i+1)
for j in xrange(m):
cpu += 1
iperf = Iperf({'-p': 5001,
'-P': parallel,
'-c': ip,
'-B': h1.get_tenant_ip(i+1),
'dir': self.opts("dir"),
'-t': self.opts('t')})
client = iperf.start_client(h1, cpu=cpu)
self.procs.append(client)
if self.opts("profile"):
h1.start_profile(dir=self.opts("profile"))
self.h1 = h1
def start(self):
h1 = Host("10.0.1.1")
h2 = Host("10.0.1.2")
hlist = HostList(h1, h2)
hlist_udp = HostList()
for i in xrange(2, 2+self.opts("n")):
try:
ip = pick_host_ip(i)
hi = Host(ip)
hlist.append(hi)
hlist_udp.append(hi)
except:
pass
self.hlist = hlist
hlist.prepare_iface()
hlist.rmmod()
hlist.insmod()
self.log("Creating two tenants")
h1.create_ip_tenant(tid=1)
h1.create_ip_tenant(tid=2)
# Set the weight for TCP tenant. UDP's weight is 1
h1.perfiso_set_vq_weight(vq=h1.get_tenant_ip(1),
weight=self.opts("wtcp"))
if self.opts("mtu"):
hlist.set_mtu(self.opts("mtu"))
else:
hlist.set_mtu("1500")
h2.create_ip_tenant(tid=1)
hlist_udp.create_ip_tenant(2)
sleep(1)
hlist.setup_tenant_routes()
if self.opts("enabled"):
hlist.perfiso_set("IsoAutoGenerateFeedback", "1")
hlist.perfiso_set("ISO_VQ_DRAIN_RATE_MBPS", self.opts("vqrate"))
hlist.perfiso_set("ISO_VQ_UPDATE_INTERVAL_US", self.opts("vqupdate"))
hlist.perfiso_set("ISO_RFAIR_INITIAL", 9000)
# don't muck around with parameters
#if self.opts("aimd_dt_us"):
#hlist.perfiso_set("ISO_RFAIR_DECREASE_INTERVAL_US", self.opts("aimd_dt_us"))
#hlist.perfiso_set("ISO_RFAIR_INCREASE_INTERVAL_US", self.opts("aimd_dt_us"))
# At 500us, we increment by 1Mbps. So let's use this
# to scale our increment accordingly
#increment = max(1, self.opts("ai") * int(self.opts("aimd_dt_us")) / 500)
#hlist.perfiso_set("ISO_RFAIR_INCREMENT", "%s" % increment)
#hlist.perfiso_set("ISO_FALPHA", "%s" % self.opts("md"))
else:
hlist.perfiso_set("IsoAutoGenerateFeedback", 0)
hlist.perfiso_set("ISO_VQ_DRAIN_RATE_MBPS", 100000)
hlist.perfiso_set("ISO_VQ_UPDATE_INTERVAL_US", 1000000)
hlist.perfiso_set("ISO_RFAIR_INITIAL", 100000)
hlist.perfiso_set("ISO_MAX_TX_RATE", 100000)
hlist.start_monitors(self.opts("dir"), 1e3)
self.procs = []
if self.opts("tcptest") == "xput":
# Start iperf servers
iperf = Iperf({'-p': 5001})
server = iperf.start_server(h1)
self.procs.append(server)
sleep(1)
# Start P TCP connection from h2 to h1
opts = {'-p': 5001,
'-c': h1.get_10g_ip(),
'-t': self.opts("t"),
'dir': self.opts("dir"),
'-P': self.opts("P")}
opts['-c'] = h1.get_tenant_ip(1)
client = Iperf(opts)
client = client.start_client(h2)
self.procs.append(client)
elif self.opts("tcptest") == "latency":
# Start netperf server
hlist.cmd("rmmod r2d2")
h1.start_netperf_server()
sleep(1)
out = os.path.join(self.opts("dir"), "netperf_rr.txt")
opts = "-v 2 -H %s -l %s " % (h1.get_tenant_ip(1), self.opts("t"))
opts += " -t TCP_RR -D 1,s -- -r %s -D " % self.opts("rrsize")
h2.start_netperf_client(opts=opts, out=out)
if self.opts("traffic"):
for hi in hlist.lst:
LOADGEN = "taskset -c 7 /root/vimal/exports/loadgen"
ip = hi.get_tenant_ip(2)
out = os.path.join(self.opts("dir"), "loadgen.txt")
cmd = "%s -i %s " % (LOADGEN, ip)
cmd += "-l 12345 -p 500000 -f %s > %s" % (self.opts("traffic"), out)
hi.cmd_async(cmd)
# Start it
sleep(5)
execs = []
for hi in hlist.lst:
ip = hi.get_tenant_ip(2)
execs.append(subprocess.Popen("nc -nzv %s %s" % (ip, 12345), shell=True))
for e in execs:
e.wait()
else:
for hi in hlist_udp.lst:
# Start 32 UDP from h3 to h1
opts = {'-p': 5002,
'-c': h1.get_10g_ip(),
'-t': self.opts("t"),
'-b': '3G',
'start_udp': self.opts("start_udp"),
'-B': hi.get_tenant_ip(2),
'-P': self.opts("P")}
opts['-c'] = h1.get_tenant_ip(2)
client = Iperf(opts)
client = client.start_client(hi)
self.procs.append(client)
def start(self):
h1 = Host("10.0.1.1")
h2 = Host("10.0.1.2")
h3 = Host("10.0.1.4")
self.hlist = HostList(h1, h2, h3)
hlist = self.hlist
for h in hlist.lst:
h.prepare_iface()
h.prepare_iface(direct=not args.oneg)
hlist.configure_rps()
hlist.rmmod()
if self.opts("enabled"):
for h in hlist.lst:
h.insmod(direct=not args.oneg)
self.log("Creating two tenants")
#h1.create_tcp_tenant(server_ports=[5001], tid=1)
#h1.create_tcp_tenant(server_ports=[5002], tid=2)
#h2.create_tcp_tenant(server_ports=[5001], tid=1)
#h3.create_tcp_tenant(server_ports=[5002], tid=2)
h1.create_ip_tenant(tid=1, weight=self.opts("wtcp"), direct=not args.oneg)
h1.create_ip_tenant(tid=2, direct=not args.oneg)
h2.create_ip_tenant(tid=1, direct=not args.oneg)
h3.create_ip_tenant(tid=1, direct=not args.oneg)
if self.opts("enabled"):
hlist.perfiso_set("ISO_VQ_DRAIN_RATE_MBPS", self.opts("vqrate"))
hlist.perfiso_set("IsoAutoGenerateFeedback", 1)
hlist.perfiso_set("ISO_VQ_UPDATE_INTERVAL_US", 25)
if self.opts("oneg"):
hlist.perfiso_set("ISO_VQ_MARK_THRESH_BYTES", 30000)
hlist.perfiso_set("ISO_VQ_MAX_BYTES", 60000)
hlist.perfiso_set("ISO_RFAIR_INCREASE_INTERVAL_US", 2000)
hlist.perfiso_set("ISO_RFAIR_DECREASE_INTERVAL_US", 2000)
hlist.start_monitors(self.opts("dir"), 1e3)
self.procs = []
# Start iperf servers
for p in [5001, 5002]:
iperf = Iperf({'-p': p})
server = iperf.start_server(h1)
self.procs.append(server)
sleep(1)
# Start 1 TCP connection from h2 to h1
client = Iperf({'-p': 5001,
'-c': h1.get_10g_ip(),
'-t': self.opts("t"),
'-P': 2})
if self.opts("enabled"):
client.opts["-c"] = h1.get_tenant_ip(1)
client = client.start_client(h2)
self.procs.append(client)
# Start 32 TCP from h3 to h1
client = Iperf({'-p': 5002,
'-c': h1.get_10g_ip(),
'-t': self.opts("t"),
'-P': self.opts("P")})
if self.opts("enabled"):
client.opts["-c"] = h1.get_tenant_ip(2)
if self.opts("udp"):
client.opts["-b"] = '3G'
client = client.start_client(h3)
self.procs.append(client)