from pyroute2.common import map_namespace
from pyroute2.netlink import nlmsg
FR_ACT_UNSPEC = 0
FR_ACT_TO_TBL = 1
FR_ACT_GOTO = 2
FR_ACT_NOP = 3
FR_ACT_BLACKHOLE = 6
FR_ACT_UNREACHABLE = 7
FR_ACT_PROHIBIT = 8
(FR_ACT_NAMES, FR_ACT_VALUES) = map_namespace('FR_ACT', globals())
class fibmsg(nlmsg):
'''
IP rule message
C structure::
struct fib_rule_hdr {
__u8 family;
__u8 dst_len;
__u8 src_len;
__u8 tos;
__u8 table;
__u8 res1; /* reserved */
__u8 res2; /* reserved */
__u8 action;
__u32 flags;
};
'''
NL80211_CMD_GET_COALESCE = 100
NL80211_CMD_SET_COALESCE = 101
NL80211_CMD_CHANNEL_SWITCH = 102
NL80211_CMD_VENDOR = 103
NL80211_CMD_SET_QOS_MAP = 104
NL80211_CMD_ADD_TX_TS = 105
NL80211_CMD_DEL_TX_TS = 106
NL80211_CMD_GET_MPP = 107
NL80211_CMD_JOIN_OCB = 108
NL80211_CMD_LEAVE_OCB = 109
NL80211_CMD_CH_SWITCH_STARTED_NOTIFY = 110
NL80211_CMD_TDLS_CHANNEL_SWITCH = 111
NL80211_CMD_TDLS_CANCEL_CHANNEL_SWITCH = 112
NL80211_CMD_WIPHY_REG_CHANGE = 113
NL80211_CMD_MAX = NL80211_CMD_WIPHY_REG_CHANGE
(NL80211_NAMES, NL80211_VALUES) = map_namespace('NL80211_CMD_', globals())
NL80211_BSS_ELEMENTS_SSID = 0
NL80211_BSS_ELEMENTS_SUPPORTED_RATES = 1
NL80211_BSS_ELEMENTS_CHANNEL = 3
NL80211_BSS_ELEMENTS_TIM = 5
NL80211_BSS_ELEMENTS_RSN = 48
NL80211_BSS_ELEMENTS_EXTENDED_RATE = 50
NL80211_BSS_ELEMENTS_VENDOR = 221
BSS_MEMBERSHIP_SELECTOR_HT_PHY = 127
BSS_MEMBERSHIP_SELECTOR_VHT_PHY = 126
# interface types
NL80211_IFTYPE_UNSPECIFIED = 0
NL80211_IFTYPE_ADHOC = 1
ARPHRD_FRAD = 770 # Frame Relay Access Device
ARPHRD_SKIP = 771 # SKIP vif
ARPHRD_LOOPBACK = 772 # Loopback device
ARPHRD_LOCALTLK = 773 # Localtalk device
ARPHRD_FDDI = 774 # Fiber Distributed Data Interface
ARPHRD_BIF = 775 # AP1000 BIF
ARPHRD_SIT = 776 # sit0 device - IPv6-in-IPv4
ARPHRD_IPDDP = 777 # IP over DDP tunneller
ARPHRD_IPGRE = 778 # GRE over IP
ARPHRD_PIMREG = 779 # PIMSM register interface
ARPHRD_HIPPI = 780 # High Performance Parallel Interface
ARPHRD_ASH = 781 # Nexus 64Mbps Ash
ARPHRD_ECONET = 782 # Acorn Econet
ARPHRD_IRDA = 783 # Linux-IrDA
# ARP works differently on different FC media .. so
ARPHRD_FCPP = 784 # Point to point fibrechannel
ARPHRD_FCAL = 785 # Fibrechannel arbitrated loop
ARPHRD_FCPL = 786 # Fibrechannel public loop
ARPHRD_FCFABRIC = 787 # Fibrechannel fabric
# 787->799 reserved for fibrechannel media types
ARPHRD_IEEE802_TR = 800 # Magic type ident for TR
ARPHRD_IEEE80211 = 801 # IEEE 802.11
ARPHRD_IEEE80211_PRISM = 802 # IEEE 802.11 + Prism2 header
ARPHRD_IEEE80211_RADIOTAP = 803 # IEEE 802.11 + radiotap header
ARPHRD_MPLS_TUNNEL = 899 # MPLS Tunnel Interface
ARPHRD_VOID = 0xFFFF # Void type, nothing is known
ARPHRD_NONE = 0xFFFE # zero header length
(ARPHRD_NAMES, ARPHRD_VALUES) = map_namespace("ARPHRD_", globals())
RTM_DELMDB = 85
RTM_GETMDB = 86
RTM_NEWNSID = 88
RTM_DELNSID = 89
RTM_GETNSID = 90
RTM_NEWSTATS = 92
RTM_GETSTATS = 94
RTM_NEWCACHEREPORT = 96
RTM_NEWLINKPROP = 108
RTM_DELLINKPROP = 109
RTM_GETLINKPROP = 110
# fake internal message types
RTM_NEWNETNS = 500
RTM_DELNETNS = 501
RTM_GETNETNS = 502
(RTM_NAMES, RTM_VALUES) = map_namespace('RTM_', globals())
TC_H_INGRESS = 0xfffffff1
TC_H_CLSACT = TC_H_INGRESS
TC_H_ROOT = 0xffffffff
RTMGRP_DEFAULTS = RTMGRP_IPV4_IFADDR |\
RTMGRP_IPV6_IFADDR |\
RTMGRP_IPV4_ROUTE |\
RTMGRP_IPV6_ROUTE |\
RTMGRP_IPV4_RULE |\
RTMGRP_IPV6_RULE |\
RTMGRP_NEIGH |\
RTMGRP_LINK |\
RTMGRP_TC |\
IFF_NOTRAILERS = 0x20 # avoid use of trailers
IFF_RUNNING = 0x40 # interface RFC2863 OPER_UP
IFF_NOARP = 0x80 # no ARP protocol
IFF_PROMISC = 0x100 # receive all packets
IFF_ALLMULTI = 0x200 # receive all multicast packets
IFF_MASTER = 0x400 # master of a load balancer
IFF_SLAVE = 0x800 # slave of a load balancer
IFF_MULTICAST = 0x1000 # Supports multicast
IFF_PORTSEL = 0x2000 # can set media type
IFF_AUTOMEDIA = 0x4000 # auto media select active
IFF_DYNAMIC = 0x8000 # dialup device with changing addresses
IFF_LOWER_UP = 0x10000 # driver signals L1 up
IFF_DORMANT = 0x20000 # driver signals dormant
IFF_ECHO = 0x40000 # echo sent packets
(IFF_NAMES, IFF_VALUES) = map_namespace('IFF', globals())
IFF_MASK = IFF_UP |\
IFF_DEBUG |\
IFF_NOTRAILERS |\
IFF_NOARP |\
IFF_PROMISC |\
IFF_ALLMULTI
IFF_VOLATILE = IFF_LOOPBACK |\
IFF_POINTOPOINT |\
IFF_BROADCAST |\
IFF_ECHO |\
IFF_MASTER |\
IFF_SLAVE |\
IFF_RUNNING |\
NTF_ROUTER = 0x80
# neighbor cache entry states
NUD_INCOMPLETE = 0x01
NUD_REACHABLE = 0x02
NUD_STALE = 0x04
NUD_DELAY = 0x08
NUD_PROBE = 0x10
NUD_FAILED = 0x20
# dummy states
NUD_NOARP = 0x40
NUD_PERMANENT = 0x80
NUD_NONE = 0x00
(NTF_NAMES, NTF_VALUES) = map_namespace('NTF_', globals())
(NUD_NAMES, NUD_VALUES) = map_namespace('NUD_', globals())
flags = dict([(x[0][4:].lower(), x[1]) for x in NTF_NAMES.items()])
states = dict([(x[0][4:].lower(), x[1]) for x in NUD_NAMES.items()])
def states_a2n(s):
# parse state string
ss = s.split(',')
ret = 0
for state in ss:
state = state.upper()
if not state.startswith('NUD_'):
state = 'NUD_' + state
ret |= NUD_NAMES[state]
return ret
RTM_NEWTCLASS = 40
RTM_DELTCLASS = 41
RTM_GETTCLASS = 42
RTM_NEWTFILTER = 44
RTM_DELTFILTER = 45
RTM_GETTFILTER = 46
RTM_NEWACTION = 48
RTM_DELACTION = 49
RTM_GETACTION = 50
RTM_NEWPREFIX = 52
RTM_GETMULTICAST = 58
RTM_GETANYCAST = 62
RTM_NEWNEIGHTBL = 64
RTM_GETNEIGHTBL = 66
RTM_SETNEIGHTBL = 67
(RTM_NAMES, RTM_VALUES) = map_namespace('RTM', globals())
TC_H_INGRESS = 0xfffffff1
TC_H_ROOT = 0xffffffff
RTNL_GROUPS = RTNLGRP_IPV4_IFADDR |\
RTNLGRP_IPV6_IFADDR |\
RTNLGRP_IPV4_ROUTE |\
RTNLGRP_IPV6_ROUTE |\
RTNLGRP_NEIGH |\
RTNLGRP_LINK |\
RTNLGRP_TC
rtypes = {'RTN_UNSPEC': 0,
'RTN_UNICAST': 1, # Gateway or direct route
'RTN_LOCAL': 2, # Accept locally
from pyroute2.common import map_namespace
from pyroute2.netlink import nlmsg
FR_ACT_UNSPEC = 0
FR_ACT_TO_TBL = 1
FR_ACT_GOTO = 2
FR_ACT_NOP = 3
FR_ACT_BLACKHOLE = 6
FR_ACT_UNREACHABLE = 7
FR_ACT_PROHIBIT = 8
(FR_ACT_NAMES, FR_ACT_VALUES) = map_namespace('FR_ACT', globals())
class fibmsg(nlmsg):
'''
IP rule message
C structure::
struct fib_rule_hdr {
__u8 family;
__u8 dst_len;
__u8 src_len;
__u8 tos;
__u8 table;
__u8 res1; /* reserved */
__u8 res2; /* reserved */
__u8 action;
__u32 flags;
};
ARPHRD_FRAD = 770 # Frame Relay Access Device
ARPHRD_SKIP = 771 # SKIP vif
ARPHRD_LOOPBACK = 772 # Loopback device
ARPHRD_LOCALTLK = 773 # Localtalk device
ARPHRD_FDDI = 774 # Fiber Distributed Data Interface
ARPHRD_BIF = 775 # AP1000 BIF
ARPHRD_SIT = 776 # sit0 device - IPv6-in-IPv4
ARPHRD_IPDDP = 777 # IP over DDP tunneller
ARPHRD_IPGRE = 778 # GRE over IP
ARPHRD_PIMREG = 779 # PIMSM register interface
ARPHRD_HIPPI = 780 # High Performance Parallel Interface
ARPHRD_ASH = 781 # Nexus 64Mbps Ash
ARPHRD_ECONET = 782 # Acorn Econet
ARPHRD_IRDA = 783 # Linux-IrDA
## ARP works differently on different FC media .. so
ARPHRD_FCPP = 784 # Point to point fibrechannel
ARPHRD_FCAL = 785 # Fibrechannel arbitrated loop
ARPHRD_FCPL = 786 # Fibrechannel public loop
ARPHRD_FCFABRIC = 787 # Fibrechannel fabric
## 787->799 reserved for fibrechannel media types
ARPHRD_IEEE802_TR = 800 # Magic type ident for TR
ARPHRD_IEEE80211 = 801 # IEEE 802.11
ARPHRD_IEEE80211_PRISM = 802 # IEEE 802.11 + Prism2 header
ARPHRD_IEEE80211_RADIOTAP = 803 # IEEE 802.11 + radiotap header
ARPHRD_MPLS_TUNNEL = 899 # MPLS Tunnel Interface
ARPHRD_VOID = 0xFFFF # Void type, nothing is known
ARPHRD_NONE = 0xFFFE # zero header length
(ARPHRD_NAMES, ARPHRD_VALUES) = map_namespace("ARPHRD_", globals())
IFF_NOTRAILERS = 0x20 # avoid use of trailers
IFF_RUNNING = 0x40 # interface RFC2863 OPER_UP
IFF_NOARP = 0x80 # no ARP protocol
IFF_PROMISC = 0x100 # receive all packets
IFF_ALLMULTI = 0x200 # receive all multicast packets
IFF_MASTER = 0x400 # master of a load balancer
IFF_SLAVE = 0x800 # slave of a load balancer
IFF_MULTICAST = 0x1000 # Supports multicast
IFF_PORTSEL = 0x2000 # can set media type
IFF_AUTOMEDIA = 0x4000 # auto media select active
IFF_DYNAMIC = 0x8000 # dialup device with changing addresses
IFF_LOWER_UP = 0x10000 # driver signals L1 up
IFF_DORMANT = 0x20000 # driver signals dormant
IFF_ECHO = 0x40000 # echo sent packets
(IFF_NAMES, IFF_VALUES) = map_namespace("IFF", globals())
IFF_MASK = IFF_UP | IFF_DEBUG | IFF_NOTRAILERS | IFF_NOARP | IFF_PROMISC | IFF_ALLMULTI
IFF_VOLATILE = (
IFF_LOOPBACK
| IFF_POINTOPOINT
| IFF_BROADCAST
| IFF_ECHO
| IFF_MASTER
| IFF_SLAVE
| IFF_RUNNING
| IFF_LOWER_UP
| IFF_DORMANT
)
DEVLINK_CMD_SB_POOL_SET = 16
DEVLINK_CMD_SB_POOL_NEW = 17
DEVLINK_CMD_SB_POOL_DEL = 18
DEVLINK_CMD_SB_PORT_POOL_GET = 19
DEVLINK_CMD_SB_PORT_POOL_SET = 20
DEVLINK_CMD_SB_PORT_POOL_NEW = 21
DEVLINK_CMD_SB_PORT_POOL_DEL = 22
DEVLINK_CMD_SB_TC_POOL_BIND_GET = 23
DEVLINK_CMD_SB_TC_POOL_BIND_SET = 24
DEVLINK_CMD_SB_TC_POOL_BIND_NEW = 25
DEVLINK_CMD_SB_TC_POOL_BIND_DEL = 26
DEVLINK_CMD_SB_OCC_SNAPSHOT = 27
DEVLINK_CMD_SB_OCC_MAX_CLEAR = 28
DEVLINK_CMD_MAX = DEVLINK_CMD_SB_OCC_MAX_CLEAR
(DEVLINK_NAMES, DEVLINK_VALUES) = map_namespace('DEVLINK_CMD_', globals())
# port type
DEVLINK_PORT_TYPE_NOTSET = 0
DEVLINK_PORT_TYPE_AUTO = 1
DEVLINK_PORT_TYPE_ETH = 2
DEVLINK_PORT_TYPE_IB = 3
# threshold type
DEVLINK_SB_POOL_TYPE_INGRESS = 0
DEVLINK_SB_POOL_TYPE_EGRESS = 1
DEVLINK_SB_THRESHOLD_TO_ALPHA_MAX = 20
class devlinkcmd(genlmsg):
NL80211_CMD_GET_COALESCE = 100
NL80211_CMD_SET_COALESCE = 101
NL80211_CMD_CHANNEL_SWITCH = 102
NL80211_CMD_VENDOR = 103
NL80211_CMD_SET_QOS_MAP = 104
NL80211_CMD_ADD_TX_TS = 105
NL80211_CMD_DEL_TX_TS = 106
NL80211_CMD_GET_MPP = 107
NL80211_CMD_JOIN_OCB = 108
NL80211_CMD_LEAVE_OCB = 109
NL80211_CMD_CH_SWITCH_STARTED_NOTIFY = 110
NL80211_CMD_TDLS_CHANNEL_SWITCH = 111
NL80211_CMD_TDLS_CANCEL_CHANNEL_SWITCH = 112
NL80211_CMD_WIPHY_REG_CHANGE = 113
NL80211_CMD_MAX = NL80211_CMD_WIPHY_REG_CHANGE
(NL80211_NAMES, NL80211_VALUES) = map_namespace('NL80211_CMD_', globals())
NL80211_BSS_ELEMENTS_SSID = 0
NL80211_BSS_ELEMENTS_SUPPORTED_RATES = 1
NL80211_BSS_ELEMENTS_CHANNEL = 3
NL80211_BSS_ELEMENTS_TIM = 5
NL80211_BSS_ELEMENTS_RSN = 48
NL80211_BSS_ELEMENTS_EXTENDED_RATE = 50
NL80211_BSS_ELEMENTS_VENDOR = 221
BSS_MEMBERSHIP_SELECTOR_HT_PHY = 127
BSS_MEMBERSHIP_SELECTOR_VHT_PHY = 126
# interface types
NL80211_IFTYPE_UNSPECIFIED = 0
NL80211_IFTYPE_ADHOC = 1
from socket import inet_pton
from socket import AF_UNSPEC
from socket import AF_INET
from socket import AF_INET6
from pyroute2.common import AF_MPLS
from pyroute2.common import hexdump
from pyroute2.common import map_namespace
from pyroute2.netlink import nlmsg
from pyroute2.netlink import nla
RTNH_F_DEAD = 1
RTNH_F_PERVASIVE = 2
RTNH_F_ONLINK = 4
RTNH_F_OFFLOAD = 8
RTNH_F_LINKDOWN = 16
(RTNH_F_NAMES, RTNH_F_VALUES) = map_namespace('RTNH_F', globals())
LWTUNNEL_ENCAP_NONE = 0
LWTUNNEL_ENCAP_MPLS = 1
LWTUNNEL_ENCAP_IP = 2
LWTUNNEL_ENCAP_ILA = 3
LWTUNNEL_ENCAP_IP6 = 4
LWTUNNEL_ENCAP_SEG6 = 5
LWTUNNEL_ENCAP_BPF = 6
LWTUNNEL_ENCAP_SEG6_LOCAL = 7
class nlflags(object):
def encode(self):
if isinstance(self['flags'], (set, tuple, list)):
NL80211_BSS_ELEMENTS_SSID = 0
NL80211_BSS_ELEMENTS_SUPPORTED_RATES = 1
NL80211_BSS_ELEMENTS_CHANNEL = 3
NL80211_BSS_ELEMENTS_TIM = 5
NL80211_BSS_ELEMENTS_COUNTRY = 7
NL80211_BSS_ELEMENTS_HT_CAPABILITIES = 45
NL80211_BSS_ELEMENTS_RSN = 48
NL80211_BSS_ELEMENTS_EXTENDED_RATE = 50
NL80211_BSS_ELEMENTS_HT_OPERATION = 61
NL80211_BSS_ELEMENTS_EXT_CAPABILITIES = 127
NL80211_BSS_ELEMENTS_VHT_CAPABILITIES = 191
NL80211_BSS_ELEMENTS_VHT_OPERATION = 192
NL80211_BSS_ELEMENTS_VENDOR = 221
(NL80211_BSS_ELEMENTS_NAMES, NL80211_BSS_ELEMENTS_VALUES) =\
map_namespace('NL80211_BSS_ELEMENTS_', globals())
BSS_MEMBERSHIP_SELECTOR_HT_PHY = 127
BSS_MEMBERSHIP_SELECTOR_VHT_PHY = 126
OUI_IEEE = "00-0f-ac"
OUI_MSFT = "00-50-f2"
OUI_WFA = "50-6f-9a"
class IE:
# note: using the raw integers in the descendents so can keep the hierarchy
# in numerical order
ID = -1
Grammar = collections.namedtuple("Grammar", ("offset", "mask", "name"))
DEVLINK_CMD_SB_POOL_SET = 16
DEVLINK_CMD_SB_POOL_NEW = 17
DEVLINK_CMD_SB_POOL_DEL = 18
DEVLINK_CMD_SB_PORT_POOL_GET = 19
DEVLINK_CMD_SB_PORT_POOL_SET = 20
DEVLINK_CMD_SB_PORT_POOL_NEW = 21
DEVLINK_CMD_SB_PORT_POOL_DEL = 22
DEVLINK_CMD_SB_TC_POOL_BIND_GET = 23
DEVLINK_CMD_SB_TC_POOL_BIND_SET = 24
DEVLINK_CMD_SB_TC_POOL_BIND_NEW = 25
DEVLINK_CMD_SB_TC_POOL_BIND_DEL = 26
DEVLINK_CMD_SB_OCC_SNAPSHOT = 27
DEVLINK_CMD_SB_OCC_MAX_CLEAR = 28
DEVLINK_CMD_MAX = DEVLINK_CMD_SB_OCC_MAX_CLEAR
(DEVLINK_NAMES, DEVLINK_VALUES) = map_namespace('DEVLINK_CMD_', globals())
# port type
DEVLINK_PORT_TYPE_NOTSET = 0
DEVLINK_PORT_TYPE_AUTO = 1
DEVLINK_PORT_TYPE_ETH = 2
DEVLINK_PORT_TYPE_IB = 3
# threshold type
DEVLINK_SB_POOL_TYPE_INGRESS = 0
DEVLINK_SB_POOL_TYPE_EGRESS = 1
DEVLINK_SB_THRESHOLD_TO_ALPHA_MAX = 20
class devlinkcmd(genlmsg):
NL80211_CMD_GET_COALESCE = 100
NL80211_CMD_SET_COALESCE = 101
NL80211_CMD_CHANNEL_SWITCH = 102
NL80211_CMD_VENDOR = 103
NL80211_CMD_SET_QOS_MAP = 104
NL80211_CMD_ADD_TX_TS = 105
NL80211_CMD_DEL_TX_TS = 106
NL80211_CMD_GET_MPP = 107
NL80211_CMD_JOIN_OCB = 108
NL80211_CMD_LEAVE_OCB = 109
NL80211_CMD_CH_SWITCH_STARTED_NOTIFY = 110
NL80211_CMD_TDLS_CHANNEL_SWITCH = 111
NL80211_CMD_TDLS_CANCEL_CHANNEL_SWITCH = 112
NL80211_CMD_WIPHY_REG_CHANGE = 113
NL80211_CMD_MAX = NL80211_CMD_WIPHY_REG_CHANGE
(NL80211_NAMES, NL80211_VALUES) = map_namespace('NL80211_CMD_', globals())
NL80211_BSS_ELEMENTS_SSID = 0
NL80211_BSS_ELEMENTS_SUPPORTED_RATES = 1
NL80211_BSS_ELEMENTS_CHANNEL = 3
NL80211_BSS_ELEMENTS_VENDOR = 221
BSS_MEMBERSHIP_SELECTOR_HT_PHY = 127
BSS_MEMBERSHIP_SELECTOR_VHT_PHY = 126
class nl80211cmd(genlmsg):
nla_map = (
('NL80211_ATTR_UNSPEC', 'none'), ('NL80211_ATTR_WIPHY', 'hex'),
('NL80211_ATTR_WIPHY_NAME',
'asciiz'), ('NL80211_ATTR_IFINDEX', 'uint32'), ('NL80211_ATTR_IFNAME',
IFF_NOTRAILERS = 0x20 # avoid use of trailers
IFF_RUNNING = 0x40 # interface RFC2863 OPER_UP
IFF_NOARP = 0x80 # no ARP protocol
IFF_PROMISC = 0x100 # receive all packets
IFF_ALLMULTI = 0x200 # receive all multicast packets
IFF_MASTER = 0x400 # master of a load balancer
IFF_SLAVE = 0x800 # slave of a load balancer
IFF_MULTICAST = 0x1000 # Supports multicast
IFF_PORTSEL = 0x2000 # can set media type
IFF_AUTOMEDIA = 0x4000 # auto media select active
IFF_DYNAMIC = 0x8000 # dialup device with changing addresses
IFF_LOWER_UP = 0x10000 # driver signals L1 up
IFF_DORMANT = 0x20000 # driver signals dormant
IFF_ECHO = 0x40000 # echo sent packets
(IFF_NAMES, IFF_VALUES) = map_namespace('IFF', globals())
IFF_MASK = IFF_UP |\
IFF_DEBUG |\
IFF_NOTRAILERS |\
IFF_NOARP |\
IFF_PROMISC |\
IFF_ALLMULTI
IFF_VOLATILE = IFF_LOOPBACK |\
IFF_POINTOPOINT |\
IFF_BROADCAST |\
IFF_ECHO |\
IFF_MASTER |\
IFF_SLAVE |\
IFF_RUNNING |\
IFF_NOTRAILERS = 0x20 # avoid use of trailers
IFF_RUNNING = 0x40 # interface RFC2863 OPER_UP
IFF_NOARP = 0x80 # no ARP protocol
IFF_PROMISC = 0x100 # receive all packets
IFF_ALLMULTI = 0x200 # receive all multicast packets
IFF_MASTER = 0x400 # master of a load balancer
IFF_SLAVE = 0x800 # slave of a load balancer
IFF_MULTICAST = 0x1000 # Supports multicast
IFF_PORTSEL = 0x2000 # can set media type
IFF_AUTOMEDIA = 0x4000 # auto media select active
IFF_DYNAMIC = 0x8000 # dialup device with changing addresses
IFF_LOWER_UP = 0x10000 # driver signals L1 up
IFF_DORMANT = 0x20000 # driver signals dormant
IFF_ECHO = 0x40000 # echo sent packets
(IFF_NAMES, IFF_VALUES) = map_namespace('IFF', globals())
IFF_MASK = IFF_UP |\
IFF_DEBUG |\
IFF_NOTRAILERS |\
IFF_NOARP |\
IFF_PROMISC |\
IFF_ALLMULTI
IFF_VOLATILE = IFF_LOOPBACK |\
IFF_POINTOPOINT |\
IFF_BROADCAST |\
IFF_ECHO |\
IFF_MASTER |\
IFF_SLAVE |\
IFF_RUNNING |\
IFF_NOTRAILERS = 0x20 # avoid use of trailers
IFF_RUNNING = 0x40 # interface RFC2863 OPER_UP
IFF_NOARP = 0x80 # no ARP protocol
IFF_PROMISC = 0x100 # receive all packets
IFF_ALLMULTI = 0x200 # receive all multicast packets
IFF_MASTER = 0x400 # master of a load balancer
IFF_SLAVE = 0x800 # slave of a load balancer
IFF_MULTICAST = 0x1000 # Supports multicast
IFF_PORTSEL = 0x2000 # can set media type
IFF_AUTOMEDIA = 0x4000 # auto media select active
IFF_DYNAMIC = 0x8000 # dialup device with changing addresses
IFF_LOWER_UP = 0x10000 # driver signals L1 up
IFF_DORMANT = 0x20000 # driver signals dormant
IFF_ECHO = 0x40000 # echo sent packets
(IFF_NAMES, IFF_VALUES) = map_namespace('IFF', globals())
IFF_MASK = IFF_UP |\
IFF_DEBUG |\
IFF_NOTRAILERS |\
IFF_NOARP |\
IFF_PROMISC |\
IFF_ALLMULTI
IFF_VOLATILE = IFF_LOOPBACK |\
IFF_POINTOPOINT |\
IFF_BROADCAST |\
IFF_ECHO |\
IFF_MASTER |\
IFF_SLAVE |\
IFF_RUNNING |\
from pyroute2.common import map_namespace
from pyroute2.netlink import nlmsg
FR_ACT_UNSPEC = 0
FR_ACT_TO_TBL = 1
FR_ACT_GOTO = 2
FR_ACT_NOP = 3
FR_ACT_BLACKHOLE = 6
FR_ACT_UNREACHABLE = 7
FR_ACT_PROHIBIT = 8
(FR_ACT_NAMES, FR_ACT_VALUES) = map_namespace("FR_ACT", globals())
class fibmsg(nlmsg):
"""
IP rule message
C structure::
struct fib_rule_hdr {
__u8 family;
__u8 dst_len;
__u8 src_len;
__u8 tos;
__u8 table;
__u8 res1; /* reserved */
__u8 res2; /* reserved */
__u8 action;
__u32 flags;
};
"""
IFF_BROADCAST = 0x2
IFF_DEBUG = 0x4
IFF_LOOPBACK = 0x8
IFF_POINTOPOINT = 0x10
IFF_STATICARP = 0x20
IFF_RUNNING = 0x40
IFF_NOARP = 0x80
IFF_PROMISC = 0x100
IFF_ALLMULTI = 0x200
IFF_OACTIVE = 0x400
IFF_SIMPLEX = 0x800
IFF_LINK0 = 0x1000
IFF_LINK1 = 0x2000
IFF_LINK2 = 0x4000
IFF_MULTICAST = 0x8000
(IFF_NAMES, IFF_VALUES) = map_namespace('IFF', globals())
class bsdmsg(nlmsg_base):
__slots__ = ()
header = (('length', 'H'), ('version', 'B'), ('type', 'B'), ('hdrlen',
'H'))
class if_msg(bsdmsg):
__slots__ = ()
fields = (('ifm_index', 'H'), ('ifm_tableid', 'H'), ('ifm_pad1', 'B'),
('ifm_pad2', 'B'), ('ifm_addrs', 'i'), ('ifm_flags', 'i'),
('ifm_xflags', 'i'), ('ifi_type', 'B'), ('ifi_addrlen', 'B'),
# GENZ_GENL_FAMILY_NAME = 'genz_cmd'
# GENZ_GENL_VERSION = 1
# Commands are matched from kern_recv.c::struct genl_ops genz_gnl_ops.
# Kernel convention is not to use zero as an index or base value.
GENZ_C_PREFIX = 'GENZ_C_'
GENZ_C_ADD_COMPONENT = 1 # from genz_genl.h "enum"
GENZ_C_REMOVE_COMPONENT = 2
GENZ_C_SYMLINK_COMPONENT = 3
# Coalesce the commands into a forward and reverse map.
# From https://www.open-mesh.org/attachments/857/neighbor_extend_dump.py
(GENZ_C_name2num, GENZ_C_num2name) = map_namespace(GENZ_C_PREFIX, globals())
# These mixins are given to pyroute2 to build packed structs for sending to
# C routines (libnl). They're just linked lookup tables whose attributes are
# proscribed by internals. The choices for encoding (uint32, asciiz, etc)
# are each a class in netlink/__init.__.py "class nlmsg_atoms". If you
# don't like those choices, add a class here then add it as a new class
# attribute to nlmsg. Only override __init__ for a set_trace, nothing else.
# See also netlink/__init__.py::register_nlas() for optional fields.
class DefaultMessageModel(genlmsg):
"""
The set of all Netlink Attributes (NLAs) that could be passed.
This is the analog of the kernel "struct nla_policy".
"""
NL80211_CMD_GET_COALESCE = 100
NL80211_CMD_SET_COALESCE = 101
NL80211_CMD_CHANNEL_SWITCH = 102
NL80211_CMD_VENDOR = 103
NL80211_CMD_SET_QOS_MAP = 104
NL80211_CMD_ADD_TX_TS = 105
NL80211_CMD_DEL_TX_TS = 106
NL80211_CMD_GET_MPP = 107
NL80211_CMD_JOIN_OCB = 108
NL80211_CMD_LEAVE_OCB = 109
NL80211_CMD_CH_SWITCH_STARTED_NOTIFY = 110
NL80211_CMD_TDLS_CHANNEL_SWITCH = 111
NL80211_CMD_TDLS_CANCEL_CHANNEL_SWITCH = 112
NL80211_CMD_WIPHY_REG_CHANGE = 113
NL80211_CMD_MAX = NL80211_CMD_WIPHY_REG_CHANGE
(NL80211_NAMES, NL80211_VALUES) = map_namespace('NL80211_CMD_', globals())
NL80211_BSS_ELEMENTS_SSID = 0
NL80211_BSS_ELEMENTS_SUPPORTED_RATES = 1
NL80211_BSS_ELEMENTS_CHANNEL = 3
NL80211_BSS_ELEMENTS_TIM = 5
NL80211_BSS_ELEMENTS_EXTENDED_RATE = 50
NL80211_BSS_ELEMENTS_VENDOR = 221
BSS_MEMBERSHIP_SELECTOR_HT_PHY = 127
BSS_MEMBERSHIP_SELECTOR_VHT_PHY = 126
# interface types
NL80211_IFTYPE_UNSPECIFIED = 0
NL80211_IFTYPE_ADHOC = 1
NL80211_IFTYPE_STATION = 2
NL80211_CMD_GET_COALESCE = 100
NL80211_CMD_SET_COALESCE = 101
NL80211_CMD_CHANNEL_SWITCH = 102
NL80211_CMD_VENDOR = 103
NL80211_CMD_SET_QOS_MAP = 104
NL80211_CMD_ADD_TX_TS = 105
NL80211_CMD_DEL_TX_TS = 106
NL80211_CMD_GET_MPP = 107
NL80211_CMD_JOIN_OCB = 108
NL80211_CMD_LEAVE_OCB = 109
NL80211_CMD_CH_SWITCH_STARTED_NOTIFY = 110
NL80211_CMD_TDLS_CHANNEL_SWITCH = 111
NL80211_CMD_TDLS_CANCEL_CHANNEL_SWITCH = 112
NL80211_CMD_WIPHY_REG_CHANGE = 113
NL80211_CMD_MAX = NL80211_CMD_WIPHY_REG_CHANGE
(NL80211_NAMES, NL80211_VALUES) = map_namespace('NL80211_CMD_', globals())
NL80211_BSS_ELEMENTS_SSID = 0
NL80211_BSS_ELEMENTS_SUPPORTED_RATES = 1
NL80211_BSS_ELEMENTS_CHANNEL = 3
NL80211_BSS_ELEMENTS_VENDOR = 221
BSS_MEMBERSHIP_SELECTOR_HT_PHY = 127
BSS_MEMBERSHIP_SELECTOR_VHT_PHY = 126
class nl80211cmd(genlmsg):
nla_map = (('NL80211_ATTR_UNSPEC', 'none'),
('NL80211_ATTR_WIPHY', 'hex'),
('NL80211_ATTR_WIPHY_NAME', 'asciiz'),
('NL80211_ATTR_IFINDEX', 'uint32'),
NTF_ROUTER = 0x80
# neighbor cache entry states
NUD_INCOMPLETE = 0x01
NUD_REACHABLE = 0x02
NUD_STALE = 0x04
NUD_DELAY = 0x08
NUD_PROBE = 0x10
NUD_FAILED = 0x20
# dummy states
NUD_NOARP = 0x40
NUD_PERMANENT = 0x80
NUD_NONE = 0x00
(NTF_NAMES, NTF_VALUES) = map_namespace('NTF_', globals())
(NUD_NAMES, NUD_VALUES) = map_namespace('NUD_', globals())
flags = dict([(x[0][4:].lower(), x[1]) for x in NTF_NAMES.items()])
states = dict([(x[0][4:].lower(), x[1]) for x in NUD_NAMES.items()])
def states_a2n(s):
# parse state string
ss = s.split(',')
ret = 0
for state in ss:
state = state.upper()
if not state.startswith('NUD_'):
state = 'NUD_' + state
ret |= NUD_NAMES[state]
return ret
NL80211_CMD_GET_COALESCE = 100
NL80211_CMD_SET_COALESCE = 101
NL80211_CMD_CHANNEL_SWITCH = 102
NL80211_CMD_VENDOR = 103
NL80211_CMD_SET_QOS_MAP = 104
NL80211_CMD_ADD_TX_TS = 105
NL80211_CMD_DEL_TX_TS = 106
NL80211_CMD_GET_MPP = 107
NL80211_CMD_JOIN_OCB = 108
NL80211_CMD_LEAVE_OCB = 109
NL80211_CMD_CH_SWITCH_STARTED_NOTIFY = 110
NL80211_CMD_TDLS_CHANNEL_SWITCH = 111
NL80211_CMD_TDLS_CANCEL_CHANNEL_SWITCH = 112
NL80211_CMD_WIPHY_REG_CHANGE = 113
NL80211_CMD_MAX = NL80211_CMD_WIPHY_REG_CHANGE
(NL80211_NAMES, NL80211_VALUES) = map_namespace("NL80211_CMD_", globals())
NL80211_BSS_ELEMENTS_SSID = 0
NL80211_BSS_ELEMENTS_SUPPORTED_RATES = 1
NL80211_BSS_ELEMENTS_CHANNEL = 3
NL80211_BSS_ELEMENTS_TIM = 5
NL80211_BSS_ELEMENTS_EXTENDED_RATE = 50
NL80211_BSS_ELEMENTS_VENDOR = 221
BSS_MEMBERSHIP_SELECTOR_HT_PHY = 127
BSS_MEMBERSHIP_SELECTOR_VHT_PHY = 126
# interface types
NL80211_IFTYPE_UNSPECIFIED = 0
NL80211_IFTYPE_ADHOC = 1
NL80211_IFTYPE_STATION = 2
from socket import inet_pton
from socket import AF_UNSPEC
from socket import AF_INET
from socket import AF_INET6
from pyroute2.common import AF_MPLS
from pyroute2.common import hexdump
from pyroute2.common import map_namespace
from pyroute2.netlink import nlmsg
from pyroute2.netlink import nla
RTNH_F_DEAD = 1
RTNH_F_PERVASIVE = 2
RTNH_F_ONLINK = 4
RTNH_F_OFFLOAD = 8
RTNH_F_LINKDOWN = 16
(RTNH_F_NAMES, RTNH_F_VALUES) = map_namespace('RTNH_F', globals())
LWTUNNEL_ENCAP_NONE = 0
LWTUNNEL_ENCAP_MPLS = 1
LWTUNNEL_ENCAP_IP = 2
LWTUNNEL_ENCAP_ILA = 3
LWTUNNEL_ENCAP_IP6 = 4
LWTUNNEL_ENCAP_SEG6 = 5
LWTUNNEL_ENCAP_BPF = 6
LWTUNNEL_ENCAP_SEG6_LOCAL = 7
class nlflags(object):
def encode(self):
if isinstance(self['flags'], (set, tuple, list)):
RTM_NEWTCLASS = 40
RTM_DELTCLASS = 41
RTM_GETTCLASS = 42
RTM_NEWTFILTER = 44
RTM_DELTFILTER = 45
RTM_GETTFILTER = 46
RTM_NEWACTION = 48
RTM_DELACTION = 49
RTM_GETACTION = 50
RTM_NEWPREFIX = 52
RTM_GETMULTICAST = 58
RTM_GETANYCAST = 62
RTM_NEWNEIGHTBL = 64
RTM_GETNEIGHTBL = 66
RTM_SETNEIGHTBL = 67
(RTM_NAMES, RTM_VALUES) = map_namespace("RTM", globals())
rtypes = {
"RTN_UNSPEC": 0,
"RTN_UNICAST": 1, # Gateway or direct route
"RTN_LOCAL": 2, # Accept locally
"RTN_BROADCAST": 3, # Accept locally as broadcast
# send as broadcast
"RTN_ANYCAST": 4, # Accept locally as broadcast,
# but send as unicast
"RTN_MULTICAST": 5, # Multicast route
"RTN_BLACKHOLE": 6, # Drop
"RTN_UNREACHABLE": 7, # Destination is unreachable
"RTN_PROHIBIT": 8, # Administratively prohibited
"RTN_THROW": 9, # Not in this table
"RTN_NAT": 10, # Translate this address