def setup_telescope_and_scan(result): """ confirm the telescope is ready, and then to be sure we are testing a multiscan scenario perform one scan """ LOGGER.info( "Before starting the telescope checking if the TMC is in ON state") assert (tmc_is_on()) LOGGER.info( "Before starting the telescope checking if the telescope is in StandBy" ) assert telescope_is_in_standby() LOGGER.info("Telescope is in StandBy.") LOGGER.info("Starting up telescope") set_telescope_to_running() LOGGER.info("Telescope is in running state.") LOGGER.info("Ensuring resources are assigned") result[SUBARRAY_USED], result['sdp_block'] = take_subarray( 1).to_be_composed_out_of(2) LOGGER.info("Result of Subarray command is :" + str(result[SUBARRAY_USED]) + str(result['sdp_block'])) LOGGER.info("Resources are assigned successfully on Subarray Node.") LOGGER.info("Invoking configure command on the Subarray for first Scan.") result[SUBARRAY_USED].and_configure_scan_by_file( result['sdp_block'], file='resources/test_data/OET_integration/example_configure.json', ) LOGGER.info("Configure is successful on Subarray.") LOGGER.info("Invoking first scan on Subarray.") result[SUBARRAY_USED].and_run_a_scan() LOGGER.info("first scan completed on Subarray.") time.sleep(5) return result
def set_subarray_to_fault(result): """ Set sub-array to FAULT state by sending incomplete JSON in the Configure command. """ LOGGER.info("Before starting the telescope checking if the TMC is in ON state") assert(tmc_is_on()) if telescope_is_in_standby(): set_telescope_to_running() take_subarray(1).to_be_composed_out_of(2) subarray = SubArray(1) conf_req = ConfigureRequest() conf_req.dish = DishConfiguration(receiver_band=ReceiverBand.BAND_1) # To set sub-array to FAULT, catch and ignore # the DevFailed of a bad Configure command try: subarray.configure_from_cdm(conf_req) except DevFailed: pass subarray_state = resource(result[SUBARRAY_USED]).get('obsState') assert subarray_state == 'FAULT', \ f"Expected sub-array to be in FAULT but instead was in {subarray_state}" LOGGER.info("Sub-array has been set to FAULT")
def start_up(): LOGGER.info("Before starting the telescope checking if the TMC is in ON state") assert(tmc_is_on()) LOGGER.info("Before starting the telescope checking if the telescope is in StandBy") assert(telescope_is_in_standby()) LOGGER.info("Telescope is in StandBy.") LOGGER.info("Starting up the telescope") set_telescope_to_running() LOGGER.info("Telescope started.")
def start_up_telescope(result): LOGGER.info("Before starting the telescope checking if the TMC is in ON state") assert(tmc_is_on()) if telescope_is_in_standby(): LOGGER.info("PROCESS: Starting up telescope") set_telescope_to_running() subarray_state = resource(result[SUBARRAY_USED]).get('obsState') assert subarray_state == 'EMPTY', \ f"Expected sub-array to be in EMPTY but instead was in {subarray_state}" LOGGER.info("Sub-array is in ObsState EMPTY")
def set_to_running(): LOGGER.info( "Before starting the telescope checking if the TMC is in ON state") assert (tmc_is_on()) LOGGER.info( "Before starting the telescope checking if the telescope is in StandBy." ) assert telescope_is_in_standby() LOGGER.info("Telescope is in StandBy.") LOGGER.info("Invoking Startup Telescope command on the telescope.") set_telescope_to_running() LOGGER.info("Telescope is started successfully.")
def set_telescope_in_on_state(result): """ Set telescope to ON state (startup) if it's not yet ON. """ LOGGER.info( "Before starting the telescope checking if the TMC is in ON state") assert (tmc_is_on()) LOGGER.info("Starting up telescope") if telescope_is_in_standby(): set_telescope_to_running() telescope_state = resource(result[CENTRAL_NODE_USED]).get('telescopeState') assert telescope_state == 'ON', \ f"Expected telescope to be ON but instead was {telescope_state}" LOGGER.info("Telescope is in ON state")
def assign(): LOGGER.info( "Before starting the telescope checking if the TMC is in ON state") assert (tmc_is_on()) LOGGER.info( "Before starting the telescope checking if the telescope is in StandBy." ) assert telescope_is_in_standby() LOGGER.info("Telescope is in StandBy.") LOGGER.info("Invoking Startup Telescope command on the telescope.") set_telescope_to_running() LOGGER.info("Telescope is started successfully.") pilot, sdp_block = take_subarray(1).to_be_composed_out_of(2) LOGGER.info("Resources are assigned successfully on Subarray.") return sdp_block
def start_script_execution(script, sb_json, result): """ """ LOGGER.info("Before starting the telescope checking if the TMC is in ON state") assert(tmc_is_on()) if telescope_is_in_standby(): set_telescope_to_running() take_subarray(1).to_be_composed_out_of(2) _ = EXECUTOR.create_script(script) task = EXECUTOR.start_script(sb_json) result[SCRIPT_ID] = task.task_id assert task.state == 'RUNNING', \ f"Expected script to be RUNNING, instead was {task.state}"
def set_subarray_to_idle(result): """ Set sub-array to idle state after resources are allocated. """ LOGGER.info( "Before starting the telescope checking if the TMC is in ON state") assert (tmc_is_on()) if telescope_is_in_standby(): LOGGER.info("Starting up telescope") set_telescope_to_running() LOGGER.info("Assigning 2 dishes") take_subarray(1).to_be_composed_out_of(2) subarray_state = resource(result[SUBARRAY_USED]).get('obsState') assert subarray_state == 'IDLE', \ f"Expected sub-array to be in IDLE but instead was in {subarray_state}" LOGGER.info("Sub-array is in ObsState IDLE")
def allocate_resources(): """ setting up running telescope with 2 dishes are allocated """ LOGGER.info( "Before starting the telescope checking if the TMC is in ON state") assert (tmc_is_on()) LOGGER.info( "Before starting the telescope checking if the telescope is in StandBy" ) if telescope_is_in_standby(): LOGGER.info("Starting up telescope") set_telescope_to_running() LOGGER.info("Telescope started") LOGGER.info("Assigning 2 dishes to subarray 1") take_subarray(1).to_be_composed_out_of(2) LOGGER.info("Resources are successfully assigned to subarray 1.")
def set_subarray_to_aborted(result): """ Set sub-array to ABORTED state by sending Abort command after resources are allocated. """ LOGGER.info("Before starting the telescope checking if the TMC is in ON state") assert(tmc_is_on()) if telescope_is_in_standby(): set_telescope_to_running() take_subarray(1).to_be_composed_out_of(2) subarray = SubArray(1) subarray.abort() subarray_state = resource(result[SUBARRAY_USED]).get('obsState') assert subarray_state == 'ABORTED', \ f"Expected sub-array to be in ABORTED but instead was in {subarray_state}" LOGGER.info("Sub-array has been set to ABORTED")
def allocate_resources_from_sbi(script, sb_json): """ Use the OET Rest API to run resource allocation script with SB JSON Args: script (str): file path to an observing script sb_json (str): file path to a scheduling block """ LOGGER.info("Before starting the telescope checking if the TMC is in ON state") assert(tmc_is_on()) if telescope_is_in_standby(): set_telescope_to_running() script_completion_state = EXECUTOR.execute_script( script, sb_json, timeout=300 ) assert script_completion_state == 'COMPLETED', \ f"Expected resource allocation script to be COMPLETED, instead was {script_completion_state}"
def test_tm_subarray_inconsistent_at_start_up(): try: LOGGER.info( "Before starting the telescope checking if the TMC is in ON state") assert (tmc_is_on()) LOGGER.info( "Before starting the telescope checking if the telescope is in StandBy." ) assert telescope_is_in_standby() LOGGER.info("Telescope is in StandBy.") LOGGER.info("Invoking Startup Telescope command on the telescope.") set_telescope_to_running() LOGGER.info("Telescope is started successfully.") resource('ska_mid/tm_central/central_node').assert_attribute( 'telescopeState').equals('ON') #teardown finally: if not telescope_is_in_standby(): set_telescope_to_standby()
def test_start_up_telescope(run_context): LOGGER.info( "Before starting the telescope checking if the TMC is in ON state") assert (tmc_is_on()) LOGGER.info( "Before starting the telescope checking if the telescope is in StandBy." ) assert (telescope_is_in_standby) jsonLogin = {"username": "******", "password": "******"} url = 'http://taranta-taranta-{}:8080/login'.format( run_context.HELM_RELEASE) r = requests.post(url=url, json=jsonLogin) taranta_jwt = r.cookies.get_dict()['taranta_jwt'] cookies = {'taranta_jwt': taranta_jwt} url = 'http://taranta-taranta-{}:5004/db'.format(run_context.HELM_RELEASE) # with open('test-harness/files/mutation.json', 'r') as file: # mutation = file.read().replace('\n', '') mutation = '{"query":"mutation {\\n executeCommand(device: \\"ska_mid/tm_central/central_node\\", command: \\"TelescopeOn\\") {\\n ok\\n output\\n message\\n }\\n}\\n","variables":"null"}' LOGGER.info("Mutation " + str(mutation)) jsonMutation = json.loads(mutation) LOGGER.info("jsonMutation " + str(jsonMutation)) the_waiter = waiter() the_waiter.set_wait_for_starting_up() r = requests.post(url=url, json=jsonMutation, cookies=cookies) the_waiter.wait() LOGGER.info("r.text " + str(r.text)) parsed = json.loads(r.text) LOGGER.info("parsed r.text is " + str(parsed)) print(json.dumps(parsed, indent=4, sort_keys=True)) LOGGER.info("sorted pasrsed r.text " + str(json.dumps(parsed, indent=4, sort_keys=True))) try: assert parsed['data']['executeCommand']['ok'] == True finally: # tear down command is ignored if it is already in standby if not telescope_is_in_standby(): # wait first for telescope to completely go to standby before switchig it off again set_telescope_to_standby() LOGGER.info("Telescope is in STANDBY")