If you want to support my work on this binding you can buy me a coffee:
Home Assistant binding for Loxone.
A special thanks to Pawel Pieczul from the great openhab2 house automation software. He really helped me a lot to with the new token based authentification. Thanks Pawel!!!
If you have the gen2 miniserver you must use your loxonecloud address. You can find out your address in the LoxoneConifg software. You need your serial number. You also need to forward your ports correctly. Here is an example config:
- Download the zip file and extract all files.
- Copy the custom_components and www folder in the same folder where your configuration.yaml is located
- Restart Home-Assitant
- Go to Configuration -> Integrations and search for Pyloxone
- Add the Intgration and fill out all required fields
- Restart Home-Assitant
- Install hacs to your homeassistant installation. See https://hacs.xyz/docs/installation/manual
- Add this repository to hacs: https://github.com/JoDehli/PyLoxone
- Install the PyLoxone binding
- Restart Home-Assitant
- Go to Configuration -> Integrations and search for Pyloxone
- Add the Intgration and fill out all required fields
- Restart Home-Assitant
Add the following entries to your configuration.yaml:
loxone:
port: 8080
host: hostadress
username: username
password: password
generate_scenes: false # default is true
generate_scenes_delay: 5
generate_lightcontroller_subcontrols: falseSend command direct to the loxone for example a pulse event to a switch:
{
"uuid":"0f1e0b31-0179-7f77-ffff403fb0c34b9e",
"value":"pulse"
}- InfoOnlyAnalog and InfoOnlyDigital
- Switch, TimedSwitch and Pushbutton
- Jalousie, Window and Gate
- Intercom
- LightControllerV2
- Alarm
- RoomControllerV2 (thanks for the implementation ztamas83 )
You can integrate nearly every Loxone Entity in your Home-Assistent System by adding a custom sensor to your yaml file.
Here is a example of a sensor which is displaying the comfort temperature of a room controller v2:
sensor:
- name: RoomComfortTemperature
platform: loxone
uuidAction: "15beed5b-01ab-d81d-ffff2b06d5b9c660"
unit_of_measurement: "°C"
device_class: "temperature" # Use device classes from homeassitant for example temperature, humidity, voltage In this example a sensor with the name roomcomforttemperature (sensor.roomcomforttemperature) is created. The sensor is listening to all events from the loxone system with the specified uuid (How do you get the uuid?).
You can also send any websocket to a loxone entity for example to increase and decrease the temperature of a room controller v2. Here is a script that raises and lowers the temperature in 0.5 °C steps:
script:
tempup:
alias: TempUp
mode: single
sequence:
- data_template:
uuid: "15beed5b-01ab-d81f-ffff403fb0c34b9e"
value: "setComfortTemperature/{{ states('sensor.roomcomforttemperature')|float+0.5}}"
service: loxone.event_websocket_command
tempdown:
alias: TempDown
mode: single
sequence:
- data_template:
uuid: "15beed5b-01ab-d81f-ffff403fb0c34b9e"
value: "setComfortTemperature/{{ states('sensor.roomcomforttemperature')|float-0.5}}"
service: loxone.event_websocket_command- First get the uuidAction as described above for example. Let's assume your uuidAction for the UpDownAnalog is 152ecfaa-03ac-f715-ffff403fb0c34b9e.
- Create a Sensor do display the current value of the UpDownAnalog like this:
sensor:
- name: "Up and Down Sensor"
platform: loxone
uuidAction: "152ecfaa-03ac-f715-ffff403fb0c34b9e"
unit_of_measurement: ""- Create a script for incrementing up and down like this:
down:
alias: Down
mode: single
sequence:
- data_template:
uuid: "152ecfaa-03ac-f715-ffff403fb0c34b9e"
value: "{{ states('sensor.up_and_down_sensor')|float-1}}"
service: loxone.event_websocket_command
up:
alias: Up
mode: single
sequence:
- data_template:
uuid: "152ecfaa-03ac-f715-ffff403fb0c34b9e"
value: "{{ states('sensor.up_and_down_sensor')|float+1}}"
service: loxone.event_websocket_commandThe commands for each entity can be found in the structure file. You can download it from the Loxone Hompage.
You can get the uuid from your loxone setup by visit the folowing site with your prefered browser:
http://{ip-address-of-your-loxone}:{port}/data/LoxAPP3.json
{ip-address-of-your-loxone} --> replace with the ip of your loxone
{port} --> replace with your port (default: 80)
After entering your username and password you will see your LoxApp3.json. You can paste it in your prefered text editor and save it as a json file. In this file you can find all your uuid ids for all your devices.
Here is a example of a Room Controller V2:
"15beed5b-01ab-d81f-ffff403fb0c34b9e": {
"name": "Intelligente Raumregelung",
"type": "IRoomControllerV2",
"uuidAction": "15beed5b-01ab-d81f-ffff403fb0c34b9e",
"room": "13efd3e5-019d-8ad2-ffff403fb0c34b9e",
"cat": "152c22de-0338-94b5-ffff403fb0c34b9e",
"defaultRating": 2,
"isFavorite": false,
"isSecured": false,
"details": {
"timerModes": [
{
"name": "Anwesend",
"description": "Komfortbetrieb",
"id": 1
},
{
"name": "Abwesend",
"description": "Sparbetrieb",
"id": 0
},
{
"name": "Aus",
"description": "Geb\u00e4udeschutz",
"id": 2
}
],
"format": "%.1f\u00b0",
"connectedInputs": 0
},
"states": {
"tempActual": "15beed5b-01ab-d7f7-ffff2b06d5b9c660",
"tempTarget": "15beed5b-01ab-d81d-ffff2b06d5b9c660",
"comfortTemperature": "15beed5b-01ab-d7ff-ffff2b06d5b9c660",
"comfortTolerance": "15beed5b-01ab-d800-ffff2b06d5b9c660",
"absentMinOffset": "15beed5b-01ab-d801-ffff2b06d5b9c660",
"absentMaxOffset": "15beed5b-01ab-d802-ffff2b06d5b9c660",
"frostProtectTemperature": "15beed5b-01ab-d803-ffff2b06d5b9c660",
"heatProtectTemperature": "15beed5b-01ab-d804-ffff2b06d5b9c660",
"activeMode": "15beed5b-01ab-d7f1-ffff2b06d5b9c660",
"comfortTemperatureOffset": "15beed5b-01ab-d7ec-ffff2b06d5b9c660",
"overrideEntries": "15beed5b-01ab-d7ed-ffff2b06d5b9c660",
"prepareState": "15beed5b-01ab-d7ee-ffff2b06d5b9c660",
"useOutdoor": "15beed5b-01ab-d7ef-ffff2b06d5b9c660",
"operatingMode": "15beed5b-01ab-d7f2-ffff2b06d5b9c660",
"overrideReason": "15beed5b-01ab-d7f4-ffff2b06d5b9c660",
"openWindow": "15beed5b-01ab-d7f8-ffff2b06d5b9c660",
"modeList": "15beed5b-01ab-d7f3-ffff2b06d5b9c660"
},
"subControls": {
"15beed5b-01ab-d7eb-ffff2b06d5b9c660": {
"name": "Heating and Cooling",
"type": "IRCV2Daytimer",
"uuidAction": "15beed5b-01ab-d7eb-ffff2b06d5b9c660",
"defaultRating": 0,
"isFavorite": false,
"isSecured": false,
"details": {
"analog": true,
"format": "%.1f\u00b0"
},
"states": {
"entriesAndDefaultValue": "15beed5b-01ab-d7eb-ffff2b06d5b9c660",
"mode": "15beed5b-01ab-d81e-ffff2b06d5b9c660",
"modeList": "15beed5b-01ab-d7f3-ffff2b06d5b9c660",
"value": "15beed5b-01ab-d7f1-ffff2b06d5b9c660"
}
}
}
},