def main():
# Look for parallel in args
parser = argparse.ArgumentParser()
parser.add_argument('--parallel', action = "store_true")
args = parser.parse_args()
# What to run
argdicts = {
"-driver" : 'llg',
'-mesh' : 'ut_sphere',
'-tmax' : 10,
'-damping' : 1,
'-ts' : 'imr',
'-dt' : 0.1,
'-ms-method' : 'implicit',
'-quadrature' : 'lnodal',
'-newton-tol' : 1e-12,
"-solver" : "gmres",
"-matrix-type" : "som",
"-prec" : "som-main-exact",
}
# Where it's going to end up
base_outdir = os.path.abspath(pjoin(os.path.dirname(__file__), "Validation"))
# Run
err_codes, outdirs = mm.run_sweep(argdicts, base_outdir,
serial_mode=not args.parallel)
# Get data
datasets = list(map(mm.parse_run, outdirs))
# Check things
ran = all((e == 0 for e in err_codes))
t1 = all([tests.check_m_length(d, 1e-7) for d in datasets])
t2 = all([tests.check_error_norm(d, 1e-2) for d in datasets])
# ??ds not convinced I should let the tols be this loose
if ran and t1:
return 0
else:
return 1
def main():
# Look for parallel in args
parser = argparse.ArgumentParser()
parser.add_argument('--parallel', action = "store_true")
args = parser.parse_args()
# Test without magnetostatics by comparison with Mallinson solution
argdicts = {
"-driver" : ["ll"],
"-dt": [0.01],
"-scale": [10],
"-ms-method" : "disabled",
"-ts" : ["cay-euler", "cay-rk2"],
"-tmax" : [3],
}
base_outdir = os.path.abspath(pjoin(os.path.dirname(__file__), "Validation"))
# Run
err_codes, outdirs = mm.run_sweep(argdicts, base_outdir,
serial_mode=not args.parallel)
# Get data
datasets = list(map(mm.parse_run, outdirs))
# Check things
ran = all((e == 0 for e in err_codes))
t1 = all([tests.check_error_norm(d, 1e-5) for d in datasets])
t2 = all([tests.check_m_length(d, 1e-14) for d in datasets])
if ran and t1 and t2:
return 0
else:
return 1
def main():
# Look for parallel in args
parser = argparse.ArgumentParser()
parser.add_argument('--parallel', action = "store_true")
parser.add_argument('--short', action = "store_true")
args = parser.parse_args()
# What to run
argdicts_1d = {
# Problem specification
'-driver' : 'llg',
'-ms-method' : 'disabled',
'-mesh' : 'sq_line_periodic',
'-initial-m' : 'periodic_exact',
'-initial-is-exact' : 1,
'-h-app' : 'zero',
'-damping' : [0.9, 0.01, 0],
'-tmax' : 1.0,
'-wave-solution-c' : 1/12, # Jeong et. al's value
# Integration/calculation details
'-ts' : ["imr"],
'-ref' : [1, 4],
'-dt' : [0.1, 0.01, 0.005],
# ref 1 is way to little and dt 0.1 is way to big but test
# conservation properties anyway (should conserve).
'-newton-tol' : 1e-12,
'-renormalise' : "never",
'-quadrature' : ['lnodal'],
}
argdicts_2d = {
# Problem specification
'-driver' : 'llg',
'-ms-method' : 'disabled',
'-mesh' : 'sq_square_periodic',
'-initial-m' : 'periodic_exact',
'-initial-is-exact' : 1,
'-h-app' : 'zero',
'-damping' : [0.5], #only one case because it's slower
'-tmax' : 1.0,
'-wave-solution-c' : 1/12, # Jeong et. al's value
# Integration/calculation details
'-ts' : ["imr"],
'-ref' : [2, 5], # need to test high refinement to check that
# rescaling is working
'-dt' : [0.1],
'-newton-tol' : 1e-12,
'-renormalise' : "never",
'-quadrature' : ['lnodal'],
}
# Seems like exact solution is weird, so check another case as well
argdicts_non_exact = {
# Problem specification
'-driver' : 'llg',
'-ms-method' : 'disabled',
'-mesh' : ['sq_square'], # 'st_square'],
'-initial-m' : 'smoothly_varying_5',
'-h-app' : 'zero',
'-damping' : [0.5],
'-tmax' : 1.0,
# Integration/calculation details
'-ts' : ["imr"],
'-ref' : [2],
'-dt' : [0.1],
'-newton-tol' : 1e-12,
'-renormalise' : "never",
'-quadrature' : ['lnodal'],
}
# Where it's going to end up
base_outdir = os.path.abspath(pjoin(os.path.dirname(__file__), "Validation"))
# Run
if not args.short:
err_codes_1d, outdirs_1d = mm.run_sweep(argdicts_1d, base_outdir,
serial_mode=not args.parallel)
err_codes_2d, outdirs_2d = mm.run_sweep(argdicts_2d, base_outdir + "_2d",
serial_mode=not args.parallel)
else:
err_codes_1d = []
outdirs_1d = []
err_codes_2d = []
outdirs_2d = []
err_codes_non_exact, outdirs_non_exact = mm.run_sweep(argdicts_non_exact,
base_outdir+"_non_exact",
serial_mode=not args.parallel)
err_codes = err_codes_1d + err_codes_2d + err_codes_non_exact
outdirs = outdirs_1d + outdirs_2d + outdirs_non_exact
# Get data
datasets = list(map(mm.parse_run, outdirs))
# Check things
ran = all((e == 0 for e in err_codes))
t1 = all([tests.check_m_length(d, tol=1e-10) for d in datasets])
if ran and t1:
return 0
else:
return 1
