def SmoothBump(ni, nj, Q, ref, TriFlag, FileFormat):
fac = 2 if TriFlag else 1
ni = ni*Q*2**ref+1
nj = nj*Q*2**ref+1
print 'Cell size ' + str( int((ni-1)/Q) ) + 'x' + str( int((nj-1)/2) ) + ' with ' + str( fac*int((ni-1)/Q)*int((nj-1)/2) ) + ' Elements'
#Create all the vertexes
V = npy.zeros((ni,nj,2),float)
#Upper boundary
y1 = 0.8
x0 = npy.linspace(-1.5, 1.5, ni)
for i in xrange(ni):
x = x0[i];
y0 = 0.0625*npy.exp(-25.*x**2)
y = npy.linspace(y0, y1, nj)
V[i,:,0] = x
V[i,:,1] = y
if FileFormat == 'p2d':
writePlot2D('SmoothBump_ref'+str(ref)+ '_Q'+str(Q)+'.p2d.x', V[:,:,0], V[:,:,1])
if FileFormat == 'p3dxy':
writeNMF('SmoothBump_ref'+str(ref)+'.nmf', ni, nj)
writePlot3D('SmoothBump_ref'+str(ref)+ '_Q'+str(Q)+'.p3d', V[:,:,0], V[:,:,1])
if FileFormat == 'p3dxz':
writeNMF('SmoothBump_ref'+str(ref)+'.nmf', ni, nj)
writePlot3Dxz('SmoothBump_ref'+str(ref)+'.p3d', V[:,:,0], V[:,:,1])
if FileFormat == 'in':
writeOVERFLOW('grid.in.'+str(ref), V[:,:,0], V[:,:,1])
V = V.reshape( (ni*nj,2) )
#---------------------------------------------#
# node number matrices for writing out blocks #
#---------------------------------------------#
NC = npy.arange(ni*nj).reshape( (ni, nj) )+1
#---------------#
# form elements #
#---------------#
E = block_elem(NC, Q);
if FileFormat == 'msh':
writeGMSH('SmoothBump', ref, Q, TriFlag, E, V, NC, ni, nj)
if FileFormat == 'grm':
writeGRM('SmoothBump', ref, Q, TriFlag, E, V, NC, ni, nj)
def SmoothBump(ni, nj, Q, ref):
ni = ni*Q*2**ref+1
nj = nj*Q*2**ref+1
#Create all the vertexes
V = npy.zeros((ni,nj,2),float)
#Upper boundary
y1 = 0.8
x0 = npy.linspace(-1.5, 1.5, ni)
for i in xrange(ni):
x = x0[i];
y0 = 0.0625*npy.exp(-25.*x**2)
y = npy.linspace(y0, y1, nj)
V[i,:,0] = x
V[i,:,1] = y
writeOVERFLOW('grid.in.'+str(ref), V[:,:,0], V[:,:,1])
writeNMF('SmoothBump_ref'+str(ref)+'.nmf', ni, nj)
writePlot3D('SmoothBump_ref'+str(ref)+'.p3d', V[:,:,0], V[:,:,1])
V = V.reshape( (ni*nj,2) )
#---------------------------------------------#
# node number matrices for writing out blocks #
#---------------------------------------------#
NC = npy.arange(ni*nj).reshape( (ni, nj) )+1
#---------------#
# form elements #
#---------------#
E = block_elem(NC, Q);
writeGMSH('SmoothBump', ref, Q, E, V, NC, ni, nj)
def make_airfoil(Dfarfield, ref, Q, TriFlag, FileFormat, farang=0.0, nchordwise=20,
nxwake=9, rxwakecenter=3.0, rxwakefary=0.35, nnormal=14,
rnormal=2.8, rnormalfar=3.0, TEfac=1.0, Ufac=1.0,
wakeangle=0.0, reynolds=1.e6, filename_base="Joukowski"):
# function make_airfoil(xyfile, UseExact, Dfarfield, ref, Q, TriFlag, farang, varargin)
#
# Makes a quad or tri .gri mesh for an airfoil using the points
# supplied in the file xyfile. This file must have two numbers
# per line, each representing an (x,y) coordinate of a point.
# The points should start at the trailing edge and loop clockwise.
# The trailing-edge is assumed closed (no gap), and the trailing-
# edge point should not be repeated. The number of points in
# the file should be sufficient to represent the geometry well, but
# it need not be a multiple of Q as the points will be re-splined.
# An optional hard-coded analytical geometry function can be used to
# nudge points to the true geometry (if using the spline is not enough).
# The spacing of points on the geometry is done via a quasi-curvature
# based method -- the optional mesh size input controls this.
# The generated mesh is of the "C" type (see graphic make_airfoil.png).
#
# INPUTS:
# Dfarfield : approximate distance to the farfield, in chords (e.g. 50)
# ref : refinement number (useful for convergence studies)
# Q : geometry order (e.g. 1,2,3,4,...)
# TriFlag : 0 = quad, 1 = tri
# farang : angle from horizontal of farfield inflow at min/max y
# (useful to keep inflow a true inflow for nonzero alpha)
# varargin : mesh size/spacing structure (optional, else default one
# defined below will be used).
#
# OUTPUTS:
# A file named: airfoil.gri
#--------------------------------------------#
# pull off meshsize structure from variable #
# input argument; or define it here #
#--------------------------------------------#
# nchordwise = 20 # number of elements along one side of the airfoil geometry
# nxwake = 9 # x-wake on centerline
# rxwakecenter = 3.0 # x-wake stretching on centerline
# rxwakefary = 0.35 # x-wake stretching far from airfoil (+/-y)
# nnormal = 14 # points normal to airfoil surface, 14=viscous, 12=inviscid
# rnormal = 2.8 # normal-direction stretching, x close to airfoil
# rnormalfar = 3.0 # normal-direction stretching, x far from airfoil
# TEfac = 1.0 # factor controlling bunching at TE (high = bunched)
# Ufac = 1.0 # factor controlling uniformity of chordwise spacing (high = uniform)
# wakeangle=0.0 # angle of wake leaving the airfoil
#--------------------#
# load/spline points #
#--------------------#
X, saf = Joukowski(nchordwise*2**ref,Q)
# print X;
c = max(X[:,0]) - min(X[:,0]) # chord length
Hc = Dfarfield*c # farfield distance
xte = X[0,:]; # TE point
XLE = X[npy.append(range(len(X)),0),:] # rest of airfoil
nLE = len(XLE)
#-------------------------------------#
# put points down along farfield, FLE #
#-------------------------------------#
dx = XLE[1:,:]-XLE[:-1,:]
ds = (dx[:,0]**2 + dx[:,1]**2)**0.5+0.1
s = npy.zeros(nLE)
for i in xrange(1,nLE):
s[i] = s[i-1]+ds[i-1]
x0 = tan(farang)*Hc
radius = (x0**2 + Hc**2)**0.5
t0 = s/max(s)*(pi-2*farang) + 3*pi/2 + farang
#print t0
#t0 = npy.linspace( 3.*pi/2., 5.*pi/2., t0.shape[0])
#print t0
#dxds, dyds = Joukowski_dxy_ds(saf,0.1)
#t0 = npy.arccos(dyds/npy.sqrt(dxds**2+dyds**2))
#print t0
#for i in xrange(t0.shape[0]):
# t0[i] = min(t0[i], pi/2.)
#print t0
#t0 = npy.append(-t0, t0[-2::-1])
#print t0
FLE = npy.zeros([nLE,2])
FLE[:,0] = x0 - radius*cos(t0)
FLE[:,1] = radius*sin(t0)
#pyl.plot(FLE[:,0],FLE[:,1],'o')
#pyl.show()
#----------------------#
# x-wake on centerline #
#----------------------#
nr0 = nxwake*2**ref # 9=inviscid, 11=viscous
a = 0.1
b = rxwakecenter # 2.9 for NACA, inviscid
dx_te = X[0,0] - X[Q,0];
#print "TE locations\n"
#print dx_te, X[0,0], X[Q,0]
#print "TE locations done\n"
re = (npy.logspace(a,b,nr0+1) - 10**a)/(10**b-10**a)
#print re;
ratio = FindStretching(nr0, dx_te, Hc)
for i in xrange(0, nr0+1):
re[i] = Distance(i, dx_te, ratio)/Hc
#print re;
rw = spaceq(re, ref, Q)
#----------------------------------#
# C-grid: put points on wake first #
#----------------------------------#
XWK = npy.flipud(npy.array([rw*Hc+xte[0], npy.zeros(len(rw))]).transpose())
XWK[:,1] = (XWK[:,0]-xte[0])*tan(wakeangle)
XWK2 = npy.flipud(XWK)
nWK = len(XWK)
#----------------------------------------#
# x-wake spacing far from airfoil (+/-y) #
#----------------------------------------#
a = 0.1
b = rxwakefary
re = (npy.logspace(a,b,nr0+1) - 10**a)/(10**b-10**a)
rbot = npy.flipud(spaceq(re, ref, Q)*(Hc+xte[0]))
FWK1 = npy.array([rbot, XWK[:,1] - Hc - rbot*x0/Hc]).transpose()
FWK2 = npy.array([npy.flipud(rbot), XWK2[:,1] + Hc + npy.flipud(rbot)*x0/Hc]).transpose()
#pyl.plot(XWK[:,0],XWK[:,1],'o')
#pyl.plot(FWK1[:,0],FWK1[:,1],'o')
#pyl.plot(FWK2[:,0],FWK2[:,1],'o')
#pyl.show()
#-------------------#
# Wake and boundary #
#-------------------#
XWB = npy.append(XWK, XLE[1:-1,:], axis = 0)
XWB = npy.append(XWB, XWK2, axis = 0)
FWB = npy.append(FWK1, FLE[1:-1,:], axis = 0)
FWB = npy.append(FWB, FWK2, axis = 0)
nWB = len(XWB)
#------------------#
# points on C grid #
#------------------#
nr0 = nnormal*2**ref
# The old spacing; log-linear
a = 0.1
b = rnormal
re = (npy.logspace(a,b,nr0+1) - 10**a)/(10**b-10**a)
# print re
# The new spacing; exponential
if (reynolds > 5e5):
# Turbulent. y+=5 for the first cell at the TE on the coarse mesh
coarse_yplus = 5
dy_te = 5.82 * (coarse_yplus / reynolds**0.9) / 2**ref
wake_power = 0.8
else:
# Laminar. Put two cells across the BL at the TE on the coarse mesh
dy_te = 1. / reynolds**0.5 / 2**ref
wake_power = 0.5
nr = 1 + (len(re)-1)*Q
XC = npy.zeros([nWB, nr])
YC = npy.array(XC)
a = 0.1
b = rnormalfar
re = (npy.logspace(a,b,nr0+1) - 10**a)/(10**b-10**a)
r1 = spaceq(re, ref, Q)
#print re
for i in xrange(nWB):
iplus = min(nWB-1, i+1)
iminus = max(0, i-1)
ds = ((XWB[iplus,0] - XWB[iminus,0])**2 +
(XWB[iplus,1] - XWB[iminus,1])**2)**0.5/ (iplus - iminus)
dy = min(dy_te, ds*5*Q)
dy = dy_te * max(XWB[i,0],1)**wake_power
# print XWB[iplus,0], XWB[iminus,0], ds, dy, iplus, iminus
ratio = FindStretching(nr0, dy, Hc)
for i2 in xrange(0, nr0+1):
#print i2, Distance(i2, dy, ratio)/Hc
re[i2] = Distance(i2, dy, ratio)/Hc
r0 = spaceq(re, ref, Q)
#print re
r = r0
#if i < nWK-1 or i > nWB-nWK-1:
# xx = (XWB[i,0]-XWK[-1,0])/max(XWB[:,0])
# r = r0 * (1-xx) + r1 * xx
XC[i,:] = XWB[i,0] + r*(FWB[i,0]-XWB[i,0])
YC[i,:] = XWB[i,1] + r*(FWB[i,1]-XWB[i,1])
#pyl.plot(XC,YC,'o')
#pyl.show()
if FileFormat == 'p2d':
writePlot2D(filename_base + '_ref'+str(ref)+ '_Q'+str(Q)+'.p2d', XC, YC)
if FileFormat == 'p3d':
writeNMF(filename_base + '_ref'+str(ref)+ '_Q'+str(Q)+'.nmf', XC, nLE, nWK, nWB, nr)
writePlot3D(filename_base + '_ref'+str(ref)+ '_Q'+str(Q)+'.p3d', XC, YC)
if FileFormat == 'in':
writeOVERFLOW('grid.in.'+str(ref), XC, YC)
#--------------------#
# Vertices, unrolled #
#--------------------#
V = npy.zeros((nWB*nr,2),float)
V[:,0] = XC.T.reshape(nWB*nr)
V[:,1] = YC.T.reshape(nWB*nr)
#pyl.plot(XC.reshape(nWB*nr),YC.reshape(nWB*nr),'o')
#pyl.show()
#pyl.plot(V[:,0],V[:,1],'o')
#pyl.show()
#---------------------------------------------#
# node number matrices for writing out blocks #
#---------------------------------------------#
NC = npy.arange(nWB*nr).reshape( (nr, nWB) ).T+1
V = npy.delete(V,NC[nWB-nWK:nWB,0]-1,0)
NC[nWB-nWK:nWB,0] = NC[nWK-1::-1,0]
NC[:,1:] = NC[:,1:]-nWK
#---------------#
# form elements #
#---------------#
E = block_elem(NC, Q);
#---------------#
# write file #
#---------------#
if FileFormat == 'grm':
writeGRM(filename_base, ref, Q, E, V, nLE, NC, nWK, nWB, nr);
if FileFormat == 'fec':
writeVTK(filename_base, ref, Q, E, V);
writeFEC(filename_base, ref, Q, E, V, nLE, NC, nWK, nWB, nr);
if FileFormat == 'msh':
writeGMSH(filename_base, ref, Q, E, V, nLE, NC, nWK, nWB, nr);
return
def make_joukowski(ref, Q, TriFlag, Distribution, FileFormat, reynolds, filename_base):
if Distribution == "Challenge":
XC, YC = make_joukowski_challenge(ref, Q, reynolds)
nWK = 8*Q*2**ref+1
else:
raise ValueError("Distribution should be 'Challenge'")
nLE = 16*Q*2**ref+1
nWB = XC.shape[0]
nr = XC.shape[1]
filename_base += "_tri" if TriFlag else "_quad"
fac = 2 if TriFlag else 1
print('Cell size ' + str( int((nWB-1)/Q) ) + 'x' + str( int((nr-1)/Q) ) + ' with ' + str( fac*int((nWB-1)/Q)*int((nr-1)/Q) ) + ' Elements')
if FileFormat == 'p2d':
writePlot2D(filename_base + '_ref'+str(ref)+ '_Q'+str(Q)+'.p2d.x', XC, YC)
if FileFormat == 'labl':
assert Q == 1
writeLaballiur(filename_base + '_ref'+str(ref)+ '_Q'+str(Q)+'.labl', XC, YC, nWK)
if FileFormat == 'p3dxy':
writeNMF(filename_base + '_ref'+str(ref)+ '_Q'+str(Q)+'.nmf', XC, nLE, nWK, nWB, nr, 'z')
writePlot3D(filename_base + '_ref'+str(ref)+ '_Q'+str(Q)+'.p3d.x', XC, YC)
if FileFormat == 'p3dxz':
writeNMF(filename_base + '_ref'+str(ref)+ '_Q'+str(Q)+'.nmf', XC, nLE, nWK, nWB, nr, 'y')
writePlot3Dxz(filename_base + '_ref'+str(ref)+ '_Q'+str(Q)+'.p3d.x', XC, YC)
if FileFormat == 'in':
writeOVERFLOW('grid.in.'+str(ref), XC, YC)
if FileFormat == 'hypgen':
writePlot2D('joukowski_c.crv', XC[:,0:1], YC[:,0:1])
if FileFormat == 'ebg':
writeEBG('joukowski.ebg', XC, YC, nWK)
if FileFormat == 'geo':
writeGEO('joukowski.geo', XC, YC, nWK)
if FileFormat == 'curve':
writeCurve(XC, YC, nWK)
#--------------------#
# Vertices, unrolled #
#--------------------#
V = npy.zeros((nWB*nr,2),float)
V[:,0] = XC.T.reshape(nWB*nr)
V[:,1] = YC.T.reshape(nWB*nr)
#pyl.plot(XC.reshape(nWB*nr),YC.reshape(nWB*nr),'o')
#pyl.show()
#pyl.plot(V[:,0],V[:,1],'o')
#pyl.show()
#---------------------------------------------#
# node number matrices for writing out blocks #
#---------------------------------------------#
NC = npy.arange(nWB*nr).reshape( (nr, nWB) ).T+1
V = npy.delete(V,NC[nWB-nWK:nWB,0]-1,0)
NC[nWB-nWK:nWB,0] = NC[nWK-1::-1,0]
NC[:,1:] = NC[:,1:]-nWK
#---------------#
# form elements #
#---------------#
E = block_elem(NC, Q);
#---------------#
# write file #
#---------------#
if FileFormat == 'grm':
writeGRM(filename_base, ref, Q, TriFlag, E, V, nLE, NC, nWK, nWB, nr);
if FileFormat == 'fec':
writeVTK(filename_base, ref, Q, E, V);
writeFEC(filename_base, ref, Q, E, V, nLE, NC, nWK, nWB, nr);
if FileFormat == 'msh':
writeGMSH(filename_base, ref, Q, TriFlag, E, V, nLE, NC, nWK, nWB, nr);
print("Done with refinement " + str(ref))
def make_joukowski(ref, Q, TriFlag, Distribution, FileFormat, reynolds, filename_base):
if Distribution == "Classic":
XC, YC = make_joukowski_classic(ref, Q, reynolds)
nWK = 16*Q*2**ref+1
elif Distribution == "Challenge":
XC, YC = make_joukowski_challenge(ref, Q, reynolds)
nWK = 8*Q*2**ref+1
else:
raise ValueError("Distribution should be 'Classic' or 'Challenge'")
nLE = 16*Q*2**ref+1
nWB = XC.shape[0]
nr = XC.shape[1]
filename_base += "_tri" if TriFlag else "_quad"
fac = 2 if TriFlag else 1
print 'Cell size ' + str( int((nWB-1)/Q) ) + 'x' + str( int((nr-1)/Q) ) + ' with ' + str( fac*int((nWB-1)/Q)*int((nr-1)/Q) ) + ' Elements'
if FileFormat == 'p2d':
writePlot2D(filename_base + '_ref'+str(ref)+ '_Q'+str(Q)+'.p2d.x', XC, YC)
if FileFormat == 'labl':
assert Q == 1
writeLaballiur(filename_base + '_ref'+str(ref)+ '_Q'+str(Q)+'.labl', XC, YC, nWK)
if FileFormat == 'p3dxy':
writeNMF(filename_base + '_ref'+str(ref)+ '_Q'+str(Q)+'.nmf', XC, nLE, nWK, nWB, nr, 'z')
writePlot3D(filename_base + '_ref'+str(ref)+ '_Q'+str(Q)+'.p3d.x', XC, YC)
if FileFormat == 'p3dxz':
writeNMF(filename_base + '_ref'+str(ref)+ '_Q'+str(Q)+'.nmf', XC, nLE, nWK, nWB, nr, 'y')
writePlot3Dxz(filename_base + '_ref'+str(ref)+ '_Q'+str(Q)+'.p3d.x', XC, YC)
if FileFormat == 'in':
writeOVERFLOW('grid.in.'+str(ref), XC, YC)
if FileFormat == 'hypgen':
writePlot2D('joukowski_c.crv', XC[:,0:1], YC[:,0:1])
if FileFormat == 'ebg':
writeEBG('joukowski.ebg', XC, YC, nWK)
if FileFormat == 'geo':
writeGEO('joukowski.geo', XC, YC, nWK)
if FileFormat == 'curve':
writeCurve(XC, YC, nWK)
#--------------------#
# Vertices, unrolled #
#--------------------#
V = npy.zeros((nWB*nr,2),float)
V[:,0] = XC.T.reshape(nWB*nr)
V[:,1] = YC.T.reshape(nWB*nr)
#pyl.plot(XC.reshape(nWB*nr),YC.reshape(nWB*nr),'o')
#pyl.show()
#pyl.plot(V[:,0],V[:,1],'o')
#pyl.show()
#---------------------------------------------#
# node number matrices for writing out blocks #
#---------------------------------------------#
NC = npy.arange(nWB*nr).reshape( (nr, nWB) ).T+1
V = npy.delete(V,NC[nWB-nWK:nWB,0]-1,0)
NC[nWB-nWK:nWB,0] = NC[nWK-1::-1,0]
NC[:,1:] = NC[:,1:]-nWK
#---------------#
# form elements #
#---------------#
E = block_elem(NC, Q);
#---------------#
# write file #
#---------------#
if FileFormat == 'grm':
writeGRM(filename_base, ref, Q, TriFlag, E, V, nLE, NC, nWK, nWB, nr);
if FileFormat == 'fec':
writeVTK(filename_base, ref, Q, E, V);
writeFEC(filename_base, ref, Q, E, V, nLE, NC, nWK, nWB, nr);
if FileFormat == 'msh':
writeGMSH(filename_base, ref, Q, TriFlag, E, V, nLE, NC, nWK, nWB, nr);
print("Done with refinement " + str(ref))
