def updatePPDPage(self, ppds=None):
QApplication.setOverrideCursor(QApplication.waitCursor)
try:
back_end, is_hp, bus, model, serial, dev_file, host, zc, port = device.parseDeviceURI(
self.device_uri)
except Error:
self.FailureUI(
self.__tr(
"<b>Device not found or invalid HPLIP device.</b><p>If you specified a USB ID, IP address, or other parameter, please re-check it and try again."
))
self.close()
sys.exit()
if ppds is None or not ppds:
ppds = cups.getSystemPPDs()
#print ppds
default_model = utils.xstrip(
model.replace('series', '').replace('Series', ''), '_')
stripped_model = cups.stripModel2(
models.normalizeModelName(model).lower())
#Check if common ppd name is already given in models.dat(This is needed because in case of devices having more than one derivatives
#will have diffrent model name strings in device ID, because of which we don't get the common ppd name for search)
ppd_name = self.mq.get('ppd-name', 0)
if ppd_name == 0:
self.ppd = cups.getPPDFile2(stripped_model, ppds)
else:
self.ppd = cups.getPPDFile2(ppd_name, ppds)
log.debug(self.ppd)
self.ppdListView.clear()
if self.ppd is not None:
#for ppd in self.ppd_dict:
PPDListViewItem(self.ppdListView, self.ppd[0], self.ppd[1])
# i = self.ppdListView.firstChild()
# self.ppdListView.setCurrentItem(i)
# self.ppdListView.setSelected(i, True)
# self.ppd_file = self.ppdListView.currentItem().ppd_file
self.ppd_file = self.ppd[0]
log.debug(self.ppd_file)
else:
self.FailureUI(
self.__tr(
'<b>PPD not file found.</b><p>An appropriate PPD file could not be found. Please check your HPLIP install, use <i>Select Other...</i>, or download one from linuxprinting.org.'
))
QApplication.restoreOverrideCursor()
def updatePPDPage(self, ppds=None):
QApplication.setOverrideCursor(QApplication.waitCursor)
try:
back_end, is_hp, bus, model, serial, dev_file, host, zc, port = device.parseDeviceURI(self.device_uri)
except Error:
self.FailureUI(
self.__tr(
"<b>Device not found or invalid HPLIP device.</b><p>If you specified a USB ID, IP address, or other parameter, please re-check it and try again."
)
)
self.close()
sys.exit()
if ppds is None or not ppds:
ppds = cups.getSystemPPDs()
self.ppd = cups.getPPDFile2(self.mq, model, ppds)
log.debug(self.ppd)
self.ppdListView.clear()
if self.ppd is not None:
PPDListViewItem(self.ppdListView, self.ppd[0], self.ppd[1])
self.ppd_file = self.ppd[0]
log.debug(self.ppd_file)
else:
self.FailureUI(
self.__tr(
"<b>PPD not file found.</b><p>An appropriate PPD file could not be found. Please check your HPLIP install, use <i>Select Other...</i>, or download one from linuxprinting.org."
)
)
QApplication.restoreOverrideCursor()
def updatePPDPage(self, ppds=None):
QApplication.setOverrideCursor(QApplication.waitCursor)
try:
back_end, is_hp, bus, model, serial, dev_file, host, zc, port = device.parseDeviceURI(self.device_uri)
except Error:
self.FailureUI(self.__tr("<b>Device not found or invalid HPLIP device.</b><p>If you specified a USB ID, IP address, or other parameter, please re-check it and try again."))
self.close()
sys.exit()
if ppds is None or not ppds:
ppds = cups.getSystemPPDs()
self.ppd = cups.getPPDFile2(self.mq, model , ppds)
log.debug(self.ppd)
self.ppdListView.clear()
if self.ppd is not None:
PPDListViewItem(self.ppdListView, self.ppd[0], self.ppd[1])
self.ppd_file = self.ppd[0]
log.debug(self.ppd_file)
else:
self.FailureUI(self.__tr('<b>PPD not file found.</b><p>An appropriate PPD file could not be found. Please check your HPLIP install, use <i>Select Other...</i>, or download one from linuxprinting.org.'))
QApplication.restoreOverrideCursor()
def updatePPDPage(self, ppds=None):
QApplication.setOverrideCursor(QApplication.waitCursor)
try:
back_end, is_hp, bus, model, serial, dev_file, host, zc, port = device.parseDeviceURI(self.device_uri)
except Error:
self.FailureUI(self.__tr("<b>Device not found or invalid HPLIP device.</b><p>If you specified a USB ID, IP address, or other parameter, please re-check it and try again."))
self.close()
sys.exit()
if ppds is None or not ppds:
ppds = cups.getSystemPPDs()
#print ppds
default_model = utils.xstrip(model.replace('series', '').replace('Series', ''), '_')
stripped_model = cups.stripModel2(models.normalizeModelName(model).lower())
#Check if common ppd name is already given in models.dat(This is needed because in case of devices having more than one derivatives
#will have diffrent model name strings in device ID, because of which we don't get the common ppd name for search)
ppd_name = self.mq.get('ppd-name',0)
if ppd_name == 0:
self.ppd = cups.getPPDFile2(stripped_model, ppds)
else:
self.ppd = cups.getPPDFile2(ppd_name, ppds)
log.debug(self.ppd)
self.ppdListView.clear()
if self.ppd is not None:
#for ppd in self.ppd_dict:
PPDListViewItem(self.ppdListView, self.ppd[0], self.ppd[1])
# i = self.ppdListView.firstChild()
# self.ppdListView.setCurrentItem(i)
# self.ppdListView.setSelected(i, True)
# self.ppd_file = self.ppdListView.currentItem().ppd_file
self.ppd_file = self.ppd[0]
log.debug(self.ppd_file)
else:
self.FailureUI(self.__tr('<b>PPD not file found.</b><p>An appropriate PPD file could not be found. Please check your HPLIP install, use <i>Select Other...</i>, or download one from linuxprinting.org.'))
QApplication.restoreOverrideCursor()
def findPrinterPPD(self):
QApplication.setOverrideCursor(QCursor(Qt.WaitCursor))
try:
self.print_ppd = None
self.ppds = cups.getSystemPPDs()
self.print_ppd = cups.getPPDFile2(self.mq, self.model, self.ppds)
finally:
QApplication.restoreOverrideCursor()
def findPrinterPPD(self):
QApplication.setOverrideCursor(QCursor(Qt.WaitCursor))
try:
self.print_ppd = None
self.ppds = cups.getSystemPPDs()
#Check if common ppd name is already given in models.dat(This is needed because in case of devices having more than one derivatives
#will have diffrent model name strings in device ID, because of which we don't get the common ppd name for search)
ppd_name = self.mq.get('ppd-name',0)
if ppd_name == 0: #Means ppd-name is not provided So follow earlier path of getting name from device ID.
model = cups.stripModel2(self.model)
self.print_ppd = cups.getPPDFile2(model, self.ppds)
else:
self.print_ppd = cups.getPPDFile2(ppd_name, self.ppds)
finally:
QApplication.restoreOverrideCursor()
if c in cups.INVALID_PRINTER_NAME_CHARS:
log.error("Invalid character '%s' in printer name. Please enter a name that does not contain this character." % c)
name_ok = False
if name_ok:
break
else:
printer_name = printer_default_model
log.info("Using queue name: %s" % printer_name)
default_model = utils.xstrip(model.replace('series', '').replace('Series', ''), '_')
log.info("Locating PPD file... Please wait.")
print_ppd = cups.getPPDFile2(mq, default_model, ppds)
enter_ppd = False
if print_ppd is None:
enter_ppd = True
log.error("Unable to find an appropriate PPD file.")
else:
print_ppd, desc = print_ppd
log.info("\nFound PPD file: %s" % print_ppd)
log.info("Description: %s" % desc)
#
if not auto:
log.info("\nNote: The model number may vary slightly from the actual model number on the device.")
ok, ans = tui.enter_yes_no("\nDoes this PPD file appear to be the correct one")
name_ok = False
if name_ok:
break
else:
printer_name = printer_default_model
log.info("Using queue name: %s" % printer_name)
default_model = utils.xstrip(
model.replace('series', '').replace('Series', ''), '_')
stripped_model = default_model.lower().replace('hp-', '').replace(
'hp_', '')
log.info("Locating PPD file... Please wait.")
print_ppd = cups.getPPDFile2(stripped_model, ppds)
enter_ppd = False
if print_ppd is None:
enter_ppd = True
log.error("Unable to find an appropriate PPD file.")
else:
print_ppd, desc = print_ppd
log.info("\nFound PPD file: %s" % print_ppd)
if desc:
log.info("Description: %s" % desc)
#
if not auto:
log.info(
if c in cups.INVALID_PRINTER_NAME_CHARS:
log.error("Invalid character '%s' in printer name. Please enter a name that does not contain this character." % c)
name_ok = False
if name_ok:
break
else:
printer_name = printer_default_model
log.info("Using queue name: %s" % printer_name)
default_model = utils.xstrip(model.replace('series', '').replace('Series', ''), '_')
stripped_model = default_model.lower().replace('hp-', '').replace('hp_', '')
log.info("Locating PPD file... Please wait.")
print_ppd = cups.getPPDFile2(stripped_model, ppds)
enter_ppd = False
if print_ppd is None:
enter_ppd = True
log.error("Unable to find an appropriate PPD file.")
else:
print_ppd, desc = print_ppd
log.info("\nFound PPD file: %s" % print_ppd)
if desc:
log.info("Description: %s" % desc)
#
if not auto:
log.info("\nNote: The model number may vary slightly from the actual model number on the device.")
