def make_single_template_plots(workflow, segs, seg_name, coinc, bank, num, out_dir,
exclude=None, require=None, tags=None):
tags = [] if tags is None else tags
makedir(out_dir)
name = 'single_template_plot'
secs = requirestr(workflow.cp.get_subsections(name), require)
secs = excludestr(secs, exclude)
files = FileList([])
for tag in secs:
for ifo in workflow.ifos:
# Reanalyze the time around the trigger in each detector
node = PlotExecutable(workflow.cp, 'single_template', ifos=[ifo],
out_dir=out_dir, tags=[tag] + tags).create_node()
node.add_input_opt('--statmap-file', coinc)
node.add_opt('--n-loudest', str(num))
node.add_input_opt('--inspiral-segments', segs[ifo])
node.add_opt('--segment-name', seg_name)
node.add_input_opt('--bank-file', bank)
node.new_output_file_opt(workflow.analysis_time, '.hdf', '--output-file')
data = node.output_files[0]
workflow += node
# Make the plot for this trigger and detector
node = PlotExecutable(workflow.cp, name, ifos=[ifo],
out_dir=out_dir, tags=[tag] + tags).create_node()
node.add_input_opt('--single-template-file', data)
node.new_output_file_opt(workflow.analysis_time, '.png', '--output-file')
workflow += node
files += node.output_files
return files
def make_plot_waveform_plot(workflow, params, out_dir, ifos, exclude=None,
require=None, tags=None):
""" Add plot_waveform jobs to the workflow.
"""
tags = [] if tags is None else tags
makedir(out_dir)
name = 'single_template_plot'
secs = requirestr(workflow.cp.get_subsections(name), require)
secs = excludestr(secs, exclude)
files = FileList([])
for tag in secs:
node = PlotExecutable(workflow.cp, 'plot_waveform', ifos=ifos,
out_dir=out_dir, tags=[tag] + tags).create_node()
node.add_opt('--mass1', "%.6f" % params['mass1'])
node.add_opt('--mass2', "%.6f" % params['mass2'])
node.add_opt('--spin1z',"%.6f" % params['spin1z'])
node.add_opt('--spin2z',"%.6f" % params['spin2z'])
if 'u_vals' in params:
# Precessing options
node.add_opt('--spin1x',"%.6f" % params['spin1x'])
node.add_opt('--spin2x',"%.6f" % params['spin2x'])
node.add_opt('--spin1y',"%.6f" % params['spin1y'])
node.add_opt('--spin2y',"%.6f" % params['spin2y'])
node.add_opt('--inclination',"%.6f" % params['inclination'])
node.add_opt('--u-val', "%.6f" % params['u_vals'])
node.new_output_file_opt(workflow.analysis_time, '.png',
'--output-file')
workflow += node
files += node.output_files
return files
def make_plot_waveform_plot(workflow, params, out_dir, ifos, exclude=None,
require=None, tags=None):
""" Add plot_waveform jobs to the workflow.
"""
tags = [] if tags is None else tags
makedir(out_dir)
name = 'single_template_plot'
secs = requirestr(workflow.cp.get_subsections(name), require)
secs = excludestr(secs, exclude)
files = FileList([])
for tag in secs:
node = PlotExecutable(workflow.cp, 'plot_waveform', ifos=ifos,
out_dir=out_dir, tags=[tag] + tags).create_node()
node.add_opt('--mass1', "%.6f" % params['mass1'])
node.add_opt('--mass2', "%.6f" % params['mass2'])
node.add_opt('--spin1z',"%.6f" % params['spin1z'])
node.add_opt('--spin2z',"%.6f" % params['spin2z'])
if params.has_key('u_vals'):
# Precessing options
node.add_opt('--spin1x',"%.6f" % params['spin1x'])
node.add_opt('--spin2x',"%.6f" % params['spin2x'])
node.add_opt('--spin1y',"%.6f" % params['spin1y'])
node.add_opt('--spin2y',"%.6f" % params['spin2y'])
node.add_opt('--inclination',"%.6f" % params['inclination'])
node.add_opt('--u-val', "%.6f" % params['u_vals'])
node.new_output_file_opt(workflow.analysis_time, '.png',
'--output-file')
workflow += node
files += node.output_files
return files
def make_trigger_timeseries(workflow,
singles,
ifo_times,
out_dir,
special_tids=None,
exclude=None,
require=None,
tags=None):
tags = [] if tags is None else tags
makedir(out_dir)
name = 'plot_trigger_timeseries'
secs = requirestr(workflow.cp.get_subsections(name), require)
secs = excludestr(secs, exclude)
files = FileList([])
for tag in secs:
node = PlotExecutable(workflow.cp,
name,
ifos=workflow.ifos,
out_dir=out_dir,
tags=[tag] + tags).create_node()
node.add_multiifo_input_list_opt('--single-trigger-files', singles)
node.add_opt('--times', ifo_times)
node.new_output_file_opt(workflow.analysis_time, '.png',
'--output-file')
if special_tids is not None:
node.add_opt('--special-trigger-ids', special_tids)
workflow += node
files += node.output_files
return files
def make_plot_waveform_plot(workflow, params, out_dir, ifos, exclude=None, require=None, tags=None):
""" Add plot_waveform jobs to the workflow.
"""
tags = [] if tags is None else tags
makedir(out_dir)
name = "single_template_plot"
secs = requirestr(workflow.cp.get_subsections(name), require)
secs = excludestr(secs, exclude)
files = FileList([])
for tag in secs:
node = PlotExecutable(workflow.cp, "plot_waveform", ifos=ifos, out_dir=out_dir, tags=[tag] + tags).create_node()
node.add_opt("--mass1", "%.6f" % params["mass1"])
node.add_opt("--mass2", "%.6f" % params["mass2"])
node.add_opt("--spin1z", "%.6f" % params["spin1z"])
node.add_opt("--spin2z", "%.6f" % params["spin2z"])
if params.has_key("u_vals"):
# Precessing options
node.add_opt("--spin1x", "%.6f" % params["spin1x"])
node.add_opt("--spin2x", "%.6f" % params["spin2x"])
node.add_opt("--spin1y", "%.6f" % params["spin1y"])
node.add_opt("--spin2y", "%.6f" % params["spin2y"])
node.add_opt("--inclination", "%.6f" % params["inclination"])
node.add_opt("--u-val", "%.6f" % params["u_vals"])
node.new_output_file_opt(workflow.analysis_time, ".png", "--output-file")
workflow += node
files += node.output_files
return files
def make_coinc_info(workflow,
singles,
bank,
coinc,
num,
out_dir,
exclude=None,
require=None,
tags=None):
tags = [] if tags is None else tags
makedir(out_dir)
name = 'page_coincinfo'
secs = requirestr(workflow.cp.get_subsections(name), require)
secs = excludestr(secs, exclude)
files = FileList([])
node = PlotExecutable(workflow.cp,
name,
ifos=workflow.ifos,
out_dir=out_dir,
tags=tags).create_node()
node.add_input_list_opt('--single-trigger-files', singles)
node.add_input_opt('--statmap-file', coinc)
node.add_input_opt('--bank-file', bank)
node.add_opt('--n-loudest', str(num))
node.new_output_file_opt(workflow.analysis_time, '.html', '--output-file')
workflow += node
files += node.output_files
return files
def make_trigger_timeseries(workflow,
singles,
ifo_times,
out_dir,
special_tids,
exclude=None,
require=None,
tags=None):
tags = [] if tags is None else tags
makedir(out_dir)
name = 'plot_trigger_timeseries'
secs = requirestr(workflow.cp.get_subsections(name), require)
secs = excludestr(secs, exclude)
files = FileList([])
for tag in secs:
node = PlotExecutable(
workflow.cp,
name,
ifos=workflow.ifos,
out_dir=out_dir,
tags=[tag] + tags).create_node()
node.add_multiifo_input_list_opt('--single-trigger-files', singles)
node.add_opt('--times', ifo_times)
node.new_output_file_opt(workflow.analysis_time, '.png',
'--output-file')
if special_tids is not None:
node.add_opt('--special-trigger-ids', special_tids)
workflow += node
files += node.output_files
return files
def make_coinc_info(workflow,
singles,
bank,
coinc,
num,
out_dir,
exclude=None,
require=None,
tags=None):
tags = [] if tags is None else tags
makedir(out_dir)
name = 'page_coincinfo'
secs = requirestr(workflow.cp.get_subsections(name), require)
secs = excludestr(secs, exclude)
files = FileList([])
node = PlotExecutable(
workflow.cp, name, ifos=workflow.ifos, out_dir=out_dir,
tags=tags).create_node()
node.add_input_list_opt('--single-trigger-files', singles)
node.add_input_opt('--statmap-file', coinc)
node.add_input_opt('--bank-file', bank)
node.add_opt('--n-loudest', str(num))
node.new_output_file_opt(workflow.analysis_time, '.html', '--output-file')
workflow += node
files += node.output_files
return files
def make_single_template_plots(workflow, segs, data_read_name, analyzed_name,
params, out_dir, inj_file=None, exclude=None,
require=None, tags=None, params_str=None,
use_exact_inj_params=False):
tags = [] if tags is None else tags
makedir(out_dir)
name = 'single_template_plot'
secs = requirestr(workflow.cp.get_subsections(name), require)
secs = excludestr(secs, exclude)
files = FileList([])
for tag in secs:
for ifo in workflow.ifos:
# Reanalyze the time around the trigger in each detector
node = PlotExecutable(workflow.cp, 'single_template', ifos=[ifo],
out_dir=out_dir, tags=[tag] + tags).create_node()
if use_exact_inj_params:
node.add_opt('--use-params-of-closest-injection')
else:
node.add_opt('--mass1', "%.6f" % params['mass1'])
node.add_opt('--mass2', "%.6f" % params['mass2'])
node.add_opt('--spin1z',"%.6f" % params['spin1z'])
node.add_opt('--spin2z',"%.6f" % params['spin2z'])
# str(numpy.float64) restricts to 2d.p. BE CAREFUL WITH THIS!!!
str_trig_time = '%.6f' %(params[ifo + '_end_time'])
node.add_opt('--trigger-time', str_trig_time)
node.add_input_opt('--inspiral-segments', segs)
if inj_file is not None:
node.add_input_opt('--injection-file', inj_file)
node.add_opt('--data-read-name', data_read_name)
node.add_opt('--data-analyzed-name', analyzed_name)
node.new_output_file_opt(workflow.analysis_time, '.hdf',
'--output-file', store_file=False)
data = node.output_files[0]
workflow += node
# Make the plot for this trigger and detector
node = PlotExecutable(workflow.cp, name, ifos=[ifo],
out_dir=out_dir, tags=[tag] + tags).create_node()
node.add_input_opt('--single-template-file', data)
node.new_output_file_opt(workflow.analysis_time, '.png',
'--output-file')
title="'%s SNR and chi^2 timeseries" %(ifo)
if params_str is not None:
title+= " using %s" %(params_str)
title+="'"
node.add_opt('--plot-title', title)
caption = "'The SNR and chi^2 timeseries around the injection"
if params_str is not None:
caption += " using %s" %(params_str)
if use_exact_inj_params:
caption += ". The injection itself was used as the template.'"
else:
caption += ". The template used has the following parameters: "
caption += "mass1=%s, mass2=%s, spin1z=%s, spin2z=%s'"\
%(params['mass1'], params['mass2'], params['spin1z'],
params['spin2z'])
node.add_opt('--plot-caption', caption)
workflow += node
files += node.output_files
return files
def make_single_template_plots(workflow, segs, seg_name, params,
out_dir, inj_file=None, exclude=None,
require=None, tags=None, params_str=None,
use_exact_inj_params=False):
tags = [] if tags is None else tags
makedir(out_dir)
name = 'single_template_plot'
secs = requirestr(workflow.cp.get_subsections(name), require)
secs = excludestr(secs, exclude)
files = FileList([])
for tag in secs:
for ifo in workflow.ifos:
# Reanalyze the time around the trigger in each detector
node = PlotExecutable(workflow.cp, 'single_template', ifos=[ifo],
out_dir=out_dir, tags=[tag] + tags).create_node()
if use_exact_inj_params:
node.add_opt('--use-params-of-closest-injection')
else:
node.add_opt('--mass1', "%.6f" % params['mass1'])
node.add_opt('--mass2', "%.6f" % params['mass2'])
node.add_opt('--spin1z',"%.6f" % params['spin1z'])
node.add_opt('--spin2z',"%.6f" % params['spin2z'])
# str(numpy.float64) restricts to 2d.p. BE CAREFUL WITH THIS!!!
str_trig_time = '%.6f' %(params[ifo + '_end_time'])
node.add_opt('--trigger-time', str_trig_time)
node.add_input_opt('--inspiral-segments', segs)
if inj_file is not None:
node.add_input_opt('--injection-file', inj_file)
node.add_opt('--segment-name', seg_name)
node.new_output_file_opt(workflow.analysis_time, '.hdf',
'--output-file', store_file=False)
data = node.output_files[0]
workflow += node
# Make the plot for this trigger and detector
node = PlotExecutable(workflow.cp, name, ifos=[ifo],
out_dir=out_dir, tags=[tag] + tags).create_node()
node.add_input_opt('--single-template-file', data)
node.new_output_file_opt(workflow.analysis_time, '.png',
'--output-file')
title="'%s SNR and chi^2 timeseries" %(ifo)
if params_str is not None:
title+= " using %s" %(params_str)
title+="'"
node.add_opt('--plot-title', title)
caption = "'The SNR and chi^2 timeseries around the injection"
if params_str is not None:
caption += " using %s" %(params_str)
if use_exact_inj_params:
caption += ". The injection itself was used as the template.'"
else:
caption += ". The template used has the following parameters: "
caption += "mass1=%s, mass2=%s, spin1z=%s, spin2z=%s'"\
%(params['mass1'], params['mass2'], params['spin1z'],
params['spin2z'])
node.add_opt('--plot-caption', caption)
workflow += node
files += node.output_files
return files
def make_single_template_plots(workflow,
segs,
seg_name,
coinc,
bank,
num,
out_dir,
exclude=None,
require=None,
tags=None):
tags = [] if tags is None else tags
makedir(out_dir)
name = 'single_template_plot'
secs = requirestr(workflow.cp.get_subsections(name), require)
secs = excludestr(secs, exclude)
files = FileList([])
for tag in secs:
for ifo in workflow.ifos:
# Reanalyze the time around the trigger in each detector
node = PlotExecutable(workflow.cp,
'single_template',
ifos=[ifo],
out_dir=out_dir,
tags=[tag] + tags).create_node()
node.add_input_opt('--statmap-file', coinc)
node.add_opt('--n-loudest', str(num))
node.add_input_opt('--inspiral-segments', segs[ifo])
node.add_opt('--segment-name', seg_name)
node.add_input_opt('--bank-file', bank)
node.new_output_file_opt(workflow.analysis_time, '.hdf',
'--output-file')
data = node.output_files[0]
workflow += node
# Make the plot for this trigger and detector
node = PlotExecutable(workflow.cp,
name,
ifos=[ifo],
out_dir=out_dir,
tags=[tag] + tags).create_node()
node.add_input_opt('--single-template-file', data)
node.new_output_file_opt(workflow.analysis_time, '.png',
'--output-file')
workflow += node
files += node.output_files
return files
def make_single_template_plots(workflow, segs, data_read_name, analyzed_name,
params, out_dir, inj_file=None, exclude=None,
require=None, tags=None, params_str=None,
use_exact_inj_params=False):
"""Function for creating jobs to run the pycbc_single_template code and
to run the associated plotting code pycbc_single_template_plots and add
these jobs to the workflow.
Parameters
-----------
workflow : workflow.Workflow instance
The pycbc.workflow.Workflow instance to add these jobs to.
segs : workflow.File instance
The pycbc.workflow.File instance that points to the XML file containing
the segment lists of data read in and data analyzed.
data_read_name : str
The name of the segmentlist containing the data read in by each
inspiral job in the segs file.
analyzed_name : str
The name of the segmentlist containing the data analyzed by each
inspiral job in the segs file.
params : dictionary
A dictionary containing the parameters of the template to be used.
params[ifo+'end_time'] is required for all ifos in workflow.ifos.
If use_exact_inj_params is False then also need to supply values for
[mass1, mass2, spin1z, spin2x]. For precessing templates one also
needs to supply [spin1y, spin1x, spin2x, spin2y, inclination]
additionally for precession one must supply u_vals or
u_vals_+ifo for all ifos. u_vals is the ratio between h_+ and h_x to
use when constructing h(t). h(t) = (h_+ * u_vals) + h_x.
out_dir : str
Directory in which to store the output files.
inj_file : workflow.File (optional, default=None)
If given send this injection file to the job so that injections are
made into the data.
exclude : list (optional, default=None)
If given, then when considering which subsections in the ini file to
parse for options to add to single_template_plot, only use subsections
that *do not* match strings in this list.
require : list (optional, default=None)
If given, then when considering which subsections in the ini file to
parse for options to add to single_template_plot, only use subsections
matching strings in this list.
tags : list (optional, default=None)
Add this list of tags to all jobs.
params_str : str (optional, default=None)
If given add this string to plot title and caption to describe the
template that was used.
use_exact_inj_params : boolean (optional, default=False)
If True do not use masses and spins listed in the params dictionary
but instead use the injection closest to the filter time as a template.
Returns
--------
output_files : workflow.FileList
The list of workflow.Files created in this function.
"""
tags = [] if tags is None else tags
makedir(out_dir)
name = 'single_template_plot'
secs = requirestr(workflow.cp.get_subsections(name), require)
secs = excludestr(secs, exclude)
files = FileList([])
for tag in secs:
for ifo in workflow.ifos:
if params['%s_end_time' % ifo] == -1.0:
continue
# Reanalyze the time around the trigger in each detector
node = SingleTemplateExecutable(workflow.cp, 'single_template',
ifos=[ifo], out_dir=out_dir,
tags=[tag] + tags).create_node()
if use_exact_inj_params:
node.add_opt('--use-params-of-closest-injection')
else:
node.add_opt('--mass1', "%.6f" % params['mass1'])
node.add_opt('--mass2', "%.6f" % params['mass2'])
node.add_opt('--spin1z',"%.6f" % params['spin1z'])
node.add_opt('--spin2z',"%.6f" % params['spin2z'])
node.add_opt('--template-start-frequency',
"%.6f" % params['f_lower'])
# Is this precessing?
if 'u_vals' in params or 'u_vals_%s' % ifo in params:
node.add_opt('--spin1x',"%.6f" % params['spin1x'])
node.add_opt('--spin1y',"%.6f" % params['spin1y'])
node.add_opt('--spin2x',"%.6f" % params['spin2x'])
node.add_opt('--spin2y',"%.6f" % params['spin2y'])
node.add_opt('--inclination',"%.6f" % params['inclination'])
try:
node.add_opt('--u-val',"%.6f" % params['u_vals'])
except:
node.add_opt('--u-val',
"%.6f" % params['u_vals_%s' % ifo])
# str(numpy.float64) restricts to 2d.p. BE CAREFUL WITH THIS!!!
str_trig_time = '%.6f' %(params[ifo + '_end_time'])
node.add_opt('--trigger-time', str_trig_time)
node.add_input_opt('--inspiral-segments', segs)
if inj_file is not None:
node.add_input_opt('--injection-file', inj_file)
node.add_opt('--data-read-name', data_read_name)
node.add_opt('--data-analyzed-name', analyzed_name)
node.new_output_file_opt(workflow.analysis_time, '.hdf',
'--output-file', store_file=False)
data = node.output_files[0]
workflow += node
# Make the plot for this trigger and detector
node = PlotExecutable(workflow.cp, name, ifos=[ifo],
out_dir=out_dir, tags=[tag] + tags).create_node()
node.add_input_opt('--single-template-file', data)
node.new_output_file_opt(workflow.analysis_time, '.png',
'--output-file')
title="'%s SNR and chi^2 timeseries" %(ifo)
if params_str is not None:
title+= " using %s" %(params_str)
title+="'"
node.add_opt('--plot-title', title)
caption = "'The SNR and chi^2 timeseries around the injection"
if params_str is not None:
caption += " using %s" %(params_str)
if use_exact_inj_params:
caption += ". The injection itself was used as the template.'"
else:
caption += ". The template used has the following parameters: "
caption += "mass1=%s, mass2=%s, spin1z=%s, spin2z=%s'"\
%(params['mass1'], params['mass2'], params['spin1z'],
params['spin2z'])
node.add_opt('--plot-caption', caption)
workflow += node
files += node.output_files
return files
def make_single_template_plots(workflow, segs, data_read_name, analyzed_name,
params, out_dir, inj_file=None, exclude=None,
require=None, tags=None, params_str=None,
use_exact_inj_params=False):
"""Function for creating jobs to run the pycbc_single_template code and
to run the associated plotting code pycbc_single_template_plots and add
these jobs to the workflow.
Parameters
-----------
workflow : workflow.Workflow instance
The pycbc.workflow.Workflow instance to add these jobs to.
segs : workflow.File instance
The pycbc.workflow.File instance that points to the XML file containing
the segment lists of data read in and data analyzed.
data_read_name : str
The name of the segmentlist containing the data read in by each
inspiral job in the segs file.
analyzed_name : str
The name of the segmentlist containing the data analyzed by each
inspiral job in the segs file.
params : dictionary
A dictionary containing the parameters of the template to be used.
params[ifo+'end_time'] is required for all ifos in workflow.ifos.
If use_exact_inj_params is False then also need to supply values for
['mass1','mass2','spin1z','spin2x']. For precessing templates one also
needs to supply ['spin1y', 'spin1x', 'spin2x', 'spin2y', 'inclination']
additionally for precession one must supply 'u_vals' or
'u_vals_'+ifo for all ifos. u_vals is the ratio between h_+ and h_x to
use when constructing h(t). h(t) = (h_+ * u_vals) + h_x.
out_dir : str
Directory in which to store the output files.
inj_file : workflow.File (optional, default=None)
If given send this injection file to the job so that injections are
made into the data.
exclude : list (optional, default=None)
If given, then when considering which subsections in the ini file to
parse for options to add to single_template_plot, only use subsections
that *do not* match strings in this list.
require : list (optional, default=None)
If given, then when considering which subsections in the ini file to
parse for options to add to single_template_plot, only use subsections
matching strings in this list.
tags : list (optional, default=None)
Add this list of tags to all jobs.
params_str : str (optional, default=None)
If given add this string to plot title and caption to describe the
template that was used.
use_exact_inj_params : boolean (optional, default=False)
If True do not use masses and spins listed in the params dictionary
but instead use the injection closest to the filter time as a template.
Returns
--------
output_files : workflow.FileList
The list of workflow.Files created in this function.
"""
tags = [] if tags is None else tags
makedir(out_dir)
name = 'single_template_plot'
secs = requirestr(workflow.cp.get_subsections(name), require)
secs = excludestr(secs, exclude)
files = FileList([])
for tag in secs:
for ifo in workflow.ifos:
# Reanalyze the time around the trigger in each detector
node = SingleTemplateExecutable(workflow.cp, 'single_template',
ifos=[ifo], out_dir=out_dir,
tags=[tag] + tags).create_node()
if use_exact_inj_params:
node.add_opt('--use-params-of-closest-injection')
else:
node.add_opt('--mass1', "%.6f" % params['mass1'])
node.add_opt('--mass2', "%.6f" % params['mass2'])
node.add_opt('--spin1z',"%.6f" % params['spin1z'])
node.add_opt('--spin2z',"%.6f" % params['spin2z'])
# Is this precessing?
if params.has_key('u_vals') or \
params.has_key('u_vals_%s' % ifo):
node.add_opt('--spin1x',"%.6f" % params['spin1x'])
node.add_opt('--spin1y',"%.6f" % params['spin1y'])
node.add_opt('--spin2x',"%.6f" % params['spin2x'])
node.add_opt('--spin2y',"%.6f" % params['spin2y'])
node.add_opt('--inclination',"%.6f" % params['inclination'])
try:
node.add_opt('--u-val',"%.6f" % params['u_vals'])
except:
node.add_opt('--u-val',
"%.6f" % params['u_vals_%s' % ifo])
# str(numpy.float64) restricts to 2d.p. BE CAREFUL WITH THIS!!!
str_trig_time = '%.6f' %(params[ifo + '_end_time'])
node.add_opt('--trigger-time', str_trig_time)
node.add_input_opt('--inspiral-segments', segs)
if inj_file is not None:
node.add_input_opt('--injection-file', inj_file)
node.add_opt('--data-read-name', data_read_name)
node.add_opt('--data-analyzed-name', analyzed_name)
node.new_output_file_opt(workflow.analysis_time, '.hdf',
'--output-file', store_file=False)
data = node.output_files[0]
workflow += node
# Make the plot for this trigger and detector
node = PlotExecutable(workflow.cp, name, ifos=[ifo],
out_dir=out_dir, tags=[tag] + tags).create_node()
node.add_input_opt('--single-template-file', data)
node.new_output_file_opt(workflow.analysis_time, '.png',
'--output-file')
title="'%s SNR and chi^2 timeseries" %(ifo)
if params_str is not None:
title+= " using %s" %(params_str)
title+="'"
node.add_opt('--plot-title', title)
caption = "'The SNR and chi^2 timeseries around the injection"
if params_str is not None:
caption += " using %s" %(params_str)
if use_exact_inj_params:
caption += ". The injection itself was used as the template.'"
else:
caption += ". The template used has the following parameters: "
caption += "mass1=%s, mass2=%s, spin1z=%s, spin2z=%s'"\
%(params['mass1'], params['mass2'], params['spin1z'],
params['spin2z'])
node.add_opt('--plot-caption', caption)
workflow += node
files += node.output_files
return files
