def test_really_run():
""" This test checks whether output of jitprof did not change.
It'll explode when someone touches jitprof.py
"""
mydriver = JitDriver(reds = ['i', 'n'], greens = [])
def f(n):
i = 0
while i < n:
mydriver.can_enter_jit(i=i, n=n)
mydriver.jit_merge_point(i=i, n=n)
i += 1
cap = py.io.StdCaptureFD()
try:
ll_meta_interp(f, [10], CPUClass=runner.LLtypeCPU, type_system='lltype',
ProfilerClass=Profiler)
finally:
out, err = cap.reset()
log = parse_log(err.splitlines(True))
err_sections = list(extract_category(log, 'jit-summary'))
[err1] = err_sections # there should be exactly one jit-summary
assert err1.count("\n") == JITPROF_LINES
info = parse_prof(err1)
# assert did not crash
# asserts below are a bit delicate, possibly they might be deleted
assert info.tracing_no == 1
assert info.backend_no == 1
assert info.ops.total == 2
assert info.recorded_ops.total == 2
assert info.recorded_ops.calls == 0
assert info.guards == 1
assert info.opt_ops == 13
assert info.opt_guards == 2
assert info.forcings == 0
def test_parse():
info = parse_prof(DATA)
assert info.tracing_no == 1
assert info.tracing_time == 0.006992
assert info.asm_no == 1
assert info.blackhole_no == 1
assert info.backend_no == 1
assert info.backend_time == 0.000525
assert info.ops.total == 2
assert info.ops.calls == 1
assert info.ops.pure_calls == 1
assert info.recorded_ops.total == 6
assert info.recorded_ops.calls == 3
assert info.recorded_ops.pure_calls == 2
assert info.guards == 1
assert info.blackholed_ops.total == 5
assert info.blackholed_ops.pure_calls == 3
assert info.opt_ops == 6
assert info.opt_guards == 1
assert info.forcings == 1
assert info.abort.trace_too_long == 10
assert info.abort.compiling == 11
assert info.abort.vable_escape == 12
assert info.nvirtuals == 13
assert info.nvholes == 14
assert info.nvreused == 15
def test_parse():
info = parse_prof(DATA)
assert info.tracing_no == 1
assert info.tracing_time == 0.006992
assert info.asm_no == 1
assert info.blackhole_no == 1
assert info.backend_no == 1
assert info.backend_time == 0.000525
assert info.ops.total == 2
assert info.ops.calls == 1
assert info.ops.pure_calls == 1
assert info.recorded_ops.total == 6
assert info.recorded_ops.calls == 3
assert info.recorded_ops.pure_calls == 2
assert info.guards == 1
assert info.blackholed_ops.total == 5
assert info.blackholed_ops.pure_calls == 3
assert info.opt_ops == 6
assert info.opt_guards == 1
assert info.forcings == 1
assert info.abort.trace_too_long == 10
assert info.abort.compiling == 11
assert info.abort.vable_escape == 12
assert info.nvirtuals == 13
assert info.nvholes == 14
assert info.nvreused == 15
def run(self, func_or_src, args=[], import_site=False, **jitopts):
jitopts.setdefault('threshold', 200)
src = py.code.Source(func_or_src)
if isinstance(func_or_src, types.FunctionType):
funcname = func_or_src.func_name
else:
funcname = 'main'
# write the snippet
arglist = ', '.join(map(repr, args))
with self.filepath.open("w") as f:
# we don't want to see the small bridges created
# by the checkinterval reaching the limit
f.write("import sys\n")
f.write("sys.setcheckinterval(10000000)\n")
f.write(str(src) + "\n")
f.write("print %s(%s)\n" % (funcname, arglist))
#
# run a child pypy-c with logging enabled
logfile = self.filepath.new(ext='.log')
#
cmdline = [sys.executable]
if not import_site:
cmdline.append('-S')
if jitopts:
jitcmdline = ['%s=%s' % (key, value)
for key, value in jitopts.items()]
cmdline += ['--jit', ','.join(jitcmdline)]
cmdline.append(str(self.filepath))
#
env = os.environ.copy()
env['PYPYLOG'] = self.log_string + ':' + str(logfile)
pipe = subprocess.Popen(cmdline,
env=env,
stdout=subprocess.PIPE,
stderr=subprocess.PIPE)
stdout, stderr = pipe.communicate()
if getattr(pipe, 'returncode', 0) < 0:
raise IOError("subprocess was killed by signal %d" % (
pipe.returncode,))
if stderr.startswith('SKIP:'):
py.test.skip(stderr)
if stderr.startswith('debug_alloc.h:'): # lldebug builds
stderr = ''
assert not stderr
#
# parse the JIT log
rawlog = logparser.parse_log_file(str(logfile))
rawtraces = logparser.extract_category(rawlog, 'jit-log-opt-')
log = Log(rawtraces)
log.result = eval(stdout)
#
summaries = logparser.extract_category(rawlog, 'jit-summary')
if len(summaries) > 0:
log.jit_summary = parse_prof(summaries[-1])
else:
log.jit_summary = None
#
return log
def test_really_run():
""" This test checks whether output of jitprof did not change.
It'll explode when someone touches jitprof.py
"""
mydriver = JitDriver(reds=['i', 'n'], greens=[])
def f(n):
i = 0
while i < n:
mydriver.can_enter_jit(i=i, n=n)
mydriver.jit_merge_point(i=i, n=n)
i += 1
cap = py.io.StdCaptureFD()
try:
ll_meta_interp(f, [10],
CPUClass=runner.LLtypeCPU,
type_system='lltype',
ProfilerClass=Profiler,
debug_level=DEBUG_PROFILE)
finally:
out, err = cap.reset()
err = "\n".join(err.splitlines()[-JITPROF_LINES:])
print err
assert err.count("\n") == JITPROF_LINES - 1
info = parse_prof(err)
# assert did not crash
# asserts below are a bit delicate, possibly they might be deleted
assert info.tracing_no == 1
assert info.asm_no == 1
assert info.blackhole_no == 1
assert info.backend_no == 1
assert info.ops.total == 2
assert info.ops.calls == 0
assert info.ops.pure_calls == 0
assert info.recorded_ops.total == 2
assert info.recorded_ops.calls == 0
assert info.recorded_ops.pure_calls == 0
assert info.guards == 1
assert info.blackholed_ops.total == 0
assert info.blackholed_ops.pure_calls == 0
assert info.opt_ops == 6
assert info.opt_guards == 1
assert info.forcings == 0
assert info.trace_too_long == 0
assert info.bridge_abort == 0
def test_really_run():
""" This test checks whether output of jitprof did not change.
It'll explode when someone touches jitprof.py
"""
mydriver = JitDriver(reds = ['i', 'n'], greens = [])
def f(n):
i = 0
while i < n:
mydriver.can_enter_jit(i=i, n=n)
mydriver.jit_merge_point(i=i, n=n)
i += 1
cap = py.io.StdCaptureFD()
try:
ll_meta_interp(f, [10], CPUClass=runner.LLtypeCPU, type_system='lltype',
ProfilerClass=Profiler, debug_level=DEBUG_PROFILE)
finally:
out, err = cap.reset()
err = "\n".join(err.splitlines()[-JITPROF_LINES:])
print err
assert err.count("\n") == JITPROF_LINES - 1
info = parse_prof(err)
# assert did not crash
# asserts below are a bit delicate, possibly they might be deleted
assert info.tracing_no == 1
assert info.asm_no == 1
assert info.blackhole_no == 1
assert info.backend_no == 1
assert info.ops.total == 2
assert info.ops.calls == 0
assert info.ops.pure_calls == 0
assert info.recorded_ops.total == 2
assert info.recorded_ops.calls == 0
assert info.recorded_ops.pure_calls == 0
assert info.guards == 1
assert info.blackholed_ops.total == 0
assert info.blackholed_ops.pure_calls == 0
assert info.opt_ops == 6
assert info.opt_guards == 1
assert info.forcings == 0
assert info.trace_too_long == 0
assert info.bridge_abort == 0
def test_really_run():
""" This test checks whether output of jitprof did not change.
It'll explode when someone touches jitprof.py
"""
mydriver = JitDriver(reds=['i', 'n'], greens=[])
def f(n):
i = 0
while i < n:
mydriver.can_enter_jit(i=i, n=n)
mydriver.jit_merge_point(i=i, n=n)
i += 1
cap = py.io.StdCaptureFD()
try:
ll_meta_interp(f, [10],
CPUClass=runner.LLtypeCPU,
type_system='lltype',
ProfilerClass=Profiler)
finally:
out, err = cap.reset()
log = parse_log(err.splitlines(True))
err_sections = list(extract_category(log, 'jit-summary'))
[err1] = err_sections # there should be exactly one jit-summary
assert err1.count("\n") == JITPROF_LINES
info = parse_prof(err1)
# assert did not crash
# asserts below are a bit delicate, possibly they might be deleted
assert info.tracing_no == 1
assert info.backend_no == 1
assert info.ops.total == 2
assert info.recorded_ops.total == 2
assert info.recorded_ops.calls == 0
assert info.guards == 1
assert info.opt_ops == 13
assert info.opt_guards == 2
assert info.forcings == 0
def test_parse():
info = parse_prof(DATA)
assert info.tracing_no == 1
assert info.tracing_time == 0.006992
assert info.asm_no == 1
assert info.asm_time == 0.016957
assert info.blackhole_no == 1
assert info.blackhole_time == 0.000233
assert info.backend_no == 1
assert info.backend_time == 0.000525
assert info.ops.total == 2
assert info.ops.calls == 1
assert info.ops.pure_calls == 1
assert info.recorded_ops.total == 6
assert info.recorded_ops.calls == 3
assert info.recorded_ops.pure_calls == 2
assert info.guards == 1
assert info.blackholed_ops.total == 5
assert info.blackholed_ops.pure_calls == 3
assert info.opt_ops == 6
assert info.opt_guards == 1
assert info.forcings == 1
assert info.trace_too_long == 2
assert info.bridge_abort == 3
def test_parse():
info = parse_prof(DATA)
assert info.tracing_no == 1
assert info.tracing_time == 0.006992
assert info.asm_no == 1
assert info.asm_time == 0.016957
assert info.blackhole_no == 1
assert info.blackhole_time == 0.000233
assert info.backend_no == 1
assert info.backend_time == 0.000525
assert info.ops.total == 2
assert info.ops.calls == 1
assert info.ops.pure_calls == 1
assert info.recorded_ops.total == 6
assert info.recorded_ops.calls == 3
assert info.recorded_ops.pure_calls == 2
assert info.guards == 1
assert info.blackholed_ops.total == 5
assert info.blackholed_ops.pure_calls == 3
assert info.opt_ops == 6
assert info.opt_guards == 1
assert info.forcings == 1
assert info.trace_too_long == 2
assert info.bridge_abort == 3