def qosmain():
listModem = []
#list all USB device
try:
processAllUsb = subprocess.Popen(
["ls /dev/ttyUSB*"],
stdout = subprocess.PIPE,
stderr = subprocess.PIPE,
shell = True
)
listAllUsb, errorAllUsb = processAllUsb.communicate()
#print listAllUsb
#get largest number of ttyUSBx
try:
lastChar = listAllUsb[len(listAllUsb)-2]
largest = int(lastChar)
#print largest
except:
print "!!! last char is not a number, may indicate no usb device !!!"
sys.exit(1)
except subprocess.CalledProcessError:
print "!!! list all USB error !!!"
sys.exit(1)
#list USB modem and their ttyUSBx
try:
base = "sudo udevadm info --query=symlink --name=ttyUSB"
for num in range(0, largest+1):
cmd = base + str(num)
#print cmd
processUdevadm = subprocess.Popen(
[cmd],
stdout = subprocess.PIPE,
stderr = subprocess.PIPE,
shell = True
)
outUdevadm, errorUdevadm = processUdevadm.communicate()
#print outUdevadm
try:
if re.search("gsmmodem",outUdevadm):
m = mdm("ttyUSB"+str(num),"ttyUSB"+str(num+1))
listModem.append(m)
#print "ttyUSB"+str(num)+" is modem"
#print "ttyUSB"+str(num+1)+" is stream"
#pass
else:
#print "ttyUSB"+str(num)+" is not modem"
pass
except:
print "!!! no modem detected !!!"
sys.exit(1)
except subprocess.CalledProcessError:
print "!!! get modem's ttyUSBx error !!!"
sys.exit(1)
#get qos parameter
try:
for modem in listModem:
#get tower location
#tLat, tLon = qosparam.towerlocation(modem.symlink)
#modem.towerLat = tLat
#modem.towerLon = tLon
#print "Tower lat: %s Tower lon: %s" %(tLat,tLon)
#time.sleep(1)
#get network operator - ok, can be put to db
operator = qosparam.operator(modem.symlink)
modem.operator = operator
print "Operator: %s" %operator
time.sleep(.2)
#get sim card balance - ok, can be put to db
balance = qosparam.balance(modem.operator,modem.symlink)
modem.balance = balance
print "Balance: %s" %balance
time.sleep(.2)
#get rssi - ok, can be put to db
rssi = qosparam.rssi(modem.symlink)
modem.rssi = rssi
print "RSSI: %s dBm" %rssi
time.sleep(.2)
#get sysmode and submode - ok, can be put to db
sysmode, submode = qosparam.mode(modem.symlink)
modem.sysmode = sysmode
modem.submode = submode
print "Sysmode: %s Submode: %s" % (sysmode,submode)
time.sleep(.2)
#get sms delivery percentage
#//OK
#phone = "+6281514797598"
#trial = 2
#ocr = qosparam.smsdelivery(phone,trial,modem.symlink)
#perc = ocr / float(trial) * 100
#modem.smsPerc = perc
#print "[%s]SMS:%d sent, %.2f%% has delivery report" % (operator,trial,perc)
#//END OK
#check get sms delivery per operator
#if operator == '"TELKOMSEL"':
#ocr = qosparam.smsdelivery(phone,trial,modem.symlink)
#perc = ocr / float(trial) * 100
#print '[%s]SMS:%d sent, %.2f%% has delivery report' % (operator,trial,perc)
#get call quality - not fully ok, indosat cannot get value and telkomsel value is 1.0
sQuality = qosparam.speechquality(modem.operator,modem.stream,modem.symlink)
modem.sQuality = sQuality
print "MOS: %s" %sQuality
time.sleep(.5)
#get call success (do not implement yet)
#get internet quality - ok, can be put to db
ping, dload, uload = qosparam.inetquality(modem.operator,modem.symlink)
modem.ping = ping
modem.dload = dload
modem.uload = uload
print "Ping duration: %s ms" %ping
print "dload: %s Mbits/s uload: %s Mbits/s" %(dload,uload)
time.sleep(.5)
except:
print "!!! get qos parameter error !!!"
#sys.exit(1)
#put data to database
try:
db = MySQLdb.connect("localhost","monitor","password","qostool")
curs = db.cursor()
#use python context manager for automatic rollback
latitude = "None"
longitude = "None"
for m in listModem:
cmd = ('INSERT INTO testresult VALUES (NULL,CURRENT_DATE(),NOW(),"'+str(latitude)+'","'+str(longitude)+'",'+str(m.operator)+
',"'+str(m.balance)+'","'+str(m.rssi)+'","'+str(m.sysmode)+'","'+str(m.submode)+'","'+str(m.smsPerc)+
'","'+str(m.sQuality)+'","'+str(m.ping)+'","'+str(m.dload)+'","'+str(m.uload)+'","new"'+')'
)
print cmd
with db:
curs.execute(cmd)
db.close()
except:
print "!!! problems put data to database !!!"
db.close()
sys.exit(1)
#send data to cloud
operator = '"INDOSAT"'
ttyUsbx = 'ttyUSB0'
try:
#get parameter for wvdial
if operator == '"XL"':
op = 'xl'
elif operator == '"TELKOMSEL"':
op = 'telkomsel'
elif operator == '"INDOSAT"':
op = 'indosat'
else:
return
#run wvdial
cmd = "sudo wvdial " + op + " " + ttyUsbx + " &"
subprocess.Popen([cmd], shell = True)
time.sleep(10)
#set default route
subprocess.Popen(['sudo route add default ppp0'], shell = True)
#send data to cloud
sendtocloud = subprocess.Popen(
['python firebasepi.py'],
stdout = subprocess.PIPE,
stderr = subprocess.PIPE,
shell = True
)
sendtocloud.communicate()
time.sleep(5)
#stop wvdial
cmd = "sudo poff.wvdial " + op + " " + ttyUsbx
subprocess.Popen([cmd], shell = True)
time.sleep(10)
except:
print "!!! sendingdata error !!!"
return
def main(latitude, longitude):
#listModem = []
#list all USB device
try:
processAllUsb = subprocess.Popen(["ls /dev/ttyUSB*"],
stdout=subprocess.PIPE,
stderr=subprocess.PIPE,
shell=True)
listAllUsb, errorAllUsb = processAllUsb.communicate()
#print listAllUsb
#get largest number of ttyUSBx
try:
lastChar = listAllUsb[len(listAllUsb) - 2]
largest = int(lastChar)
#print largest
except:
print "!!! last char is not a number, may indicate no usb device !!!"
sys.exit(1)
except subprocess.CalledProcessError:
print "!!! list all USB error !!!"
sys.exit(1)
#list USB modem and their ttyUSBx
try:
base = "sudo udevadm info --query=symlink --name=ttyUSB"
for num in range(0, largest + 1):
cmd = base + str(num)
#print cmd
processUdevadm = subprocess.Popen([cmd],
stdout=subprocess.PIPE,
stderr=subprocess.PIPE,
shell=True)
outUdevadm, errorUdevadm = processUdevadm.communicate()
try:
if re.search("gsmmodem", outUdevadm):
m = mdm("ttyUSB" + str(num), "ttyUSB" + str(num + 1))
listModem.append(m)
#print "ttyUSB"+str(num)+" is modem"
#print "ttyUSB"+str(num+1)+" is stream"
#pass
else:
#print "ttyUSB"+str(num)+" is not modem"
pass
except:
print "!!! no modem detected !!!"
sys.exit(1)
except subprocess.CalledProcessError:
print "!!! get modem's ttyUSBx error !!!"
sys.exit(1)
#get qos parameter
try:
for modem in listModem:
#get tower location
#tLat, tLon = qosparam.towerlocation(modem.symlink)
#modem.towerLat = tLat
#modem.towerLon = tLon
#print "Tower lat: %s Tower lon: %s" %(tLat,tLon)
#time.sleep(1)
#get network operator
operator = qosparam.operator(modem.symlink)
modem.operator = operator
print "Operator: %s" % operator
time.sleep(1)
#get sim card balance
balance = qosparam.balance(modem.operator, modem.symlink)
modem.balance = balance
print "Balance: %s" % balance
time.sleep(1)
#get rssi
rssi = qosparam.rssi(modem.symlink)
modem.rssi = rssi
print "RSSI: %s dBm" % rssi
time.sleep(1)
#get sysmode and submode
sysmode, submode = qosparam.mode(modem.symlink)
modem.sysmode = sysmode
modem.submode = submode
print "Sysmode: %s Submode: %s" % (sysmode, submode)
time.sleep(1)
#get internet quality
ping, dload, uload = qosparam.inetquality(modem.operator,
modem.symlink)
modem.ping = ping
modem.dload = dload
modem.uload = uload
print "Ping duration: %s ms" % ping
print "dload: %s Mbits/s uload: %s Mbits/s" % (dload, uload)
time.sleep(1)
#check get internet quality success then get call and sms quality, otherwise return none
if all(x is not None and x != "None"
for x in (modem.ping, modem.dload, modem.uload)):
#get call quality
sQuality = qosparam.speechquality(modem.operator, modem.stream,
modem.symlink)
modem.sQuality = sQuality
print "MOS: %s" % sQuality
time.sleep(1)
#get sms delivery occurence (for demo)
#phone = "+6281514797598"
#trial = 1
#ocr = qosparam.smsdelivery(phone,trial,modem.symlink)
#modem.smsPerc = ocr
#print "[%s]SMS:%d has delivery report" % (modem.operator,ocr)
#time.sleep(1)
else:
modem.sQuality = "None"
modem.smsPerc = "None"
#get sms delivery percentage
#//OK
#phone = "+6281514797598"
#trial = 2
#ocr = qosparam.smsdelivery(phone,trial,modem.symlink)
#perc = ocr / float(trial) * 100
#modem.smsPerc = perc
#print "[%s]SMS:%d sent, %.2f%% has delivery report" % (operator,trial,perc)
#//END OK
#check get sms delivery per operator
#if operator == '"TELKOMSEL"':
#ocr = qosparam.smsdelivery(phone,trial,modem.symlink)
#perc = ocr / float(trial) * 100
#print '[%s]SMS:%d sent, %.2f%% has delivery report' % (operator,trial,perc)
except:
print "!!! get qos parameter error !!!"
#sys.exit(1)
#put data to database
try:
db = MySQLdb.connect("localhost", "monitor", "password", "qostool")
curs = db.cursor()
#use python context manager for automatic rollback
for m in listModem:
#remove "" from operator
m.operator = m.operator.replace('"', "")
#put to rawtestresult
cmd = (
'INSERT INTO rawtestresult VALUES (NULL,CURRENT_DATE(),NOW(),"'
+ str(latitude) + '","' + str(longitude) + '","' +
str(m.operator) + '","' + str(m.balance) + '","' +
str(m.rssi) + '","' + str(m.sysmode) + '","' + str(m.submode) +
'","' + str(m.smsPerc) + '","' + str(m.sQuality) + '","' +
str(m.ping) + '","' + str(m.dload) + '","' + str(m.uload) +
'","new"' + ')')
print cmd
with db:
curs.execute(cmd)
#filter valid data
if all(x is not None and x != "None"
for x in (m.operator, m.balance, m.rssi, m.sysmode,
m.submode, m.smsPerc, m.sQuality, m.ping, m.dload,
m.uload)):
cmd = (
'INSERT INTO testresult VALUES (NULL,CURRENT_DATE(),NOW(),"'
+ str(latitude) + '","' + str(longitude) + '","' +
str(m.operator) + '","' + str(m.balance) + '","' +
str(m.rssi) + '","' + str(m.sysmode) + '","' +
str(m.submode) + '","' + str(m.smsPerc) + '","' +
str(m.sQuality) + '","' + str(m.ping) + '","' +
str(m.dload) + '","' + str(m.uload) + '","new"' + ')')
print cmd
with db:
curs.execute(cmd)
db.close()
except:
print "!!! problems put data to database !!!"
db.close()
sys.exit(1)
def main(latitude,longitude):
#listModem = []
#list all USB device
try:
processAllUsb = subprocess.Popen(
["ls /dev/ttyUSB*"],
stdout = subprocess.PIPE,
stderr = subprocess.PIPE,
shell = True
)
listAllUsb, errorAllUsb = processAllUsb.communicate()
#print listAllUsb
#get largest number of ttyUSBx
try:
lastChar = listAllUsb[len(listAllUsb)-2]
largest = int(lastChar)
#print largest
except:
print "!!! last char is not a number, may indicate no usb device !!!"
sys.exit(1)
except subprocess.CalledProcessError:
print "!!! list all USB error !!!"
sys.exit(1)
#list USB modem and their ttyUSBx
try:
base = "sudo udevadm info --query=symlink --name=ttyUSB"
for num in range(0, largest+1):
cmd = base + str(num)
#print cmd
processUdevadm = subprocess.Popen(
[cmd],
stdout = subprocess.PIPE,
stderr = subprocess.PIPE,
shell = True
)
outUdevadm, errorUdevadm = processUdevadm.communicate()
try:
if re.search("gsmmodem",outUdevadm):
m = mdm("ttyUSB"+str(num),"ttyUSB"+str(num+1))
listModem.append(m)
#print "ttyUSB"+str(num)+" is modem"
#print "ttyUSB"+str(num+1)+" is stream"
#pass
else:
#print "ttyUSB"+str(num)+" is not modem"
pass
except:
print "!!! no modem detected !!!"
sys.exit(1)
except subprocess.CalledProcessError:
print "!!! get modem's ttyUSBx error !!!"
sys.exit(1)
#get qos parameter
try:
for modem in listModem:
#get tower location
#tLat, tLon = qosparam.towerlocation(modem.symlink)
#modem.towerLat = tLat
#modem.towerLon = tLon
#print "Tower lat: %s Tower lon: %s" %(tLat,tLon)
#time.sleep(1)
#get network operator
operator = qosparam.operator(modem.symlink)
modem.operator = operator
print "Operator: %s" %operator
time.sleep(1)
#get sim card balance
balance = qosparam.balance(modem.operator,modem.symlink)
modem.balance = balance
print "Balance: %s" %balance
time.sleep(1)
#get rssi
rssi = qosparam.rssi(modem.symlink)
modem.rssi = rssi
print "RSSI: %s dBm" %rssi
time.sleep(1)
#get sysmode and submode
sysmode, submode = qosparam.mode(modem.symlink)
modem.sysmode = sysmode
modem.submode = submode
print "Sysmode: %s Submode: %s" % (sysmode,submode)
time.sleep(1)
#get internet quality
ping, dload, uload = qosparam.inetquality(modem.operator,modem.symlink)
modem.ping = ping
modem.dload = dload
modem.uload = uload
print "Ping duration: %s ms" %ping
print "dload: %s Mbits/s uload: %s Mbits/s" %(dload,uload)
time.sleep(1)
#check get internet quality success then get call and sms quality, otherwise return none
if all(x is not None and x != "None" for x in(modem.ping, modem.dload, modem.uload)):
#get call quality
sQuality = qosparam.speechquality(modem.operator,modem.stream,modem.symlink)
modem.sQuality = sQuality
print "MOS: %s" %sQuality
time.sleep(1)
#get sms delivery occurence (for demo)
#phone = "+6281514797598"
#trial = 1
#ocr = qosparam.smsdelivery(phone,trial,modem.symlink)
#modem.smsPerc = ocr
#print "[%s]SMS:%d has delivery report" % (modem.operator,ocr)
#time.sleep(1)
else:
modem.sQuality = "None"
modem.smsPerc = "None"
#get sms delivery percentage
#//OK
#phone = "+6281514797598"
#trial = 2
#ocr = qosparam.smsdelivery(phone,trial,modem.symlink)
#perc = ocr / float(trial) * 100
#modem.smsPerc = perc
#print "[%s]SMS:%d sent, %.2f%% has delivery report" % (operator,trial,perc)
#//END OK
#check get sms delivery per operator
#if operator == '"TELKOMSEL"':
#ocr = qosparam.smsdelivery(phone,trial,modem.symlink)
#perc = ocr / float(trial) * 100
#print '[%s]SMS:%d sent, %.2f%% has delivery report' % (operator,trial,perc)
except:
print "!!! get qos parameter error !!!"
#sys.exit(1)
#put data to database
try:
db = MySQLdb.connect("localhost","monitor","password","qostool")
curs = db.cursor()
#use python context manager for automatic rollback
for m in listModem:
#remove "" from operator
m.operator = m.operator.replace('"',"")
#put to rawtestresult
cmd = ('INSERT INTO rawtestresult VALUES (NULL,CURRENT_DATE(),NOW(),"'+str(latitude)+'","'+str(longitude)+'","'+str(m.operator)+
'","'+str(m.balance)+'","'+str(m.rssi)+'","'+str(m.sysmode)+'","'+str(m.submode)+'","'+str(m.smsPerc)+
'","'+str(m.sQuality)+'","'+str(m.ping)+'","'+str(m.dload)+'","'+str(m.uload)+'","new"'+')'
)
print cmd
with db:
curs.execute(cmd)
#filter valid data
if all(x is not None and x != "None" for x in (m.operator, m.balance, m.rssi, m.sysmode, m.submode, m.smsPerc, m.sQuality, m.ping, m.dload, m.uload)):
cmd = ('INSERT INTO testresult VALUES (NULL,CURRENT_DATE(),NOW(),"'+str(latitude)+'","'+str(longitude)+'","'+str(m.operator)+
'","'+str(m.balance)+'","'+str(m.rssi)+'","'+str(m.sysmode)+'","'+str(m.submode)+'","'+str(m.smsPerc)+
'","'+str(m.sQuality)+'","'+str(m.ping)+'","'+str(m.dload)+'","'+str(m.uload)+'","new"'+')'
)
print cmd
with db:
curs.execute(cmd)
db.close()
except:
print "!!! problems put data to database !!!"
db.close()
sys.exit(1)
def qosmain():
listModem = []
#list all USB device
try:
processAllUsb = subprocess.Popen(["ls /dev/ttyUSB*"],
stdout=subprocess.PIPE,
stderr=subprocess.PIPE,
shell=True)
listAllUsb, errorAllUsb = processAllUsb.communicate()
#print listAllUsb
#get largest number of ttyUSBx
try:
lastChar = listAllUsb[len(listAllUsb) - 2]
largest = int(lastChar)
#print largest
except:
print "!!! last char is not a number, may indicate no usb device !!!"
sys.exit(1)
except subprocess.CalledProcessError:
print "!!! list all USB error !!!"
sys.exit(1)
#list USB modem and their ttyUSBx
try:
base = "sudo udevadm info --query=symlink --name=ttyUSB"
for num in range(0, largest + 1):
cmd = base + str(num)
#print cmd
processUdevadm = subprocess.Popen([cmd],
stdout=subprocess.PIPE,
stderr=subprocess.PIPE,
shell=True)
outUdevadm, errorUdevadm = processUdevadm.communicate()
#print outUdevadm
try:
if re.search("gsmmodem", outUdevadm):
m = mdm("ttyUSB" + str(num), "ttyUSB" + str(num + 1))
listModem.append(m)
#print "ttyUSB"+str(num)+" is modem"
#print "ttyUSB"+str(num+1)+" is stream"
#pass
else:
#print "ttyUSB"+str(num)+" is not modem"
pass
except:
print "!!! no modem detected !!!"
sys.exit(1)
except subprocess.CalledProcessError:
print "!!! get modem's ttyUSBx error !!!"
sys.exit(1)
#get qos parameter
try:
for modem in listModem:
#get tower location
#tLat, tLon = qosparam.towerlocation(modem.symlink)
#modem.towerLat = tLat
#modem.towerLon = tLon
#print "Tower lat: %s Tower lon: %s" %(tLat,tLon)
#time.sleep(1)
#get network operator - ok, can be put to db
operator = qosparam.operator(modem.symlink)
modem.operator = operator
print "Operator: %s" % operator
time.sleep(.2)
#get sim card balance - ok, can be put to db
balance = qosparam.balance(modem.operator, modem.symlink)
modem.balance = balance
print "Balance: %s" % balance
time.sleep(.2)
#get rssi - ok, can be put to db
rssi = qosparam.rssi(modem.symlink)
modem.rssi = rssi
print "RSSI: %s dBm" % rssi
time.sleep(.2)
#get sysmode and submode - ok, can be put to db
sysmode, submode = qosparam.mode(modem.symlink)
modem.sysmode = sysmode
modem.submode = submode
print "Sysmode: %s Submode: %s" % (sysmode, submode)
time.sleep(.2)
#get sms delivery percentage
#//OK
#phone = "+6281514797598"
#trial = 2
#ocr = qosparam.smsdelivery(phone,trial,modem.symlink)
#perc = ocr / float(trial) * 100
#modem.smsPerc = perc
#print "[%s]SMS:%d sent, %.2f%% has delivery report" % (operator,trial,perc)
#//END OK
#check get sms delivery per operator
#if operator == '"TELKOMSEL"':
#ocr = qosparam.smsdelivery(phone,trial,modem.symlink)
#perc = ocr / float(trial) * 100
#print '[%s]SMS:%d sent, %.2f%% has delivery report' % (operator,trial,perc)
#get call quality - not fully ok, indosat cannot get value and telkomsel value is 1.0
sQuality = qosparam.speechquality(modem.operator, modem.stream,
modem.symlink)
modem.sQuality = sQuality
print "MOS: %s" % sQuality
time.sleep(.5)
#get call success (do not implement yet)
#get internet quality - ok, can be put to db
ping, dload, uload = qosparam.inetquality(modem.operator,
modem.symlink)
modem.ping = ping
modem.dload = dload
modem.uload = uload
print "Ping duration: %s ms" % ping
print "dload: %s Mbits/s uload: %s Mbits/s" % (dload, uload)
time.sleep(.5)
except:
print "!!! get qos parameter error !!!"
#sys.exit(1)
#put data to database
try:
db = MySQLdb.connect("localhost", "monitor", "password", "qostool")
curs = db.cursor()
#use python context manager for automatic rollback
latitude = "None"
longitude = "None"
for m in listModem:
cmd = ('INSERT INTO testresult VALUES (NULL,CURRENT_DATE(),NOW(),"'
+ str(latitude) + '","' + str(longitude) + '",' +
str(m.operator) + ',"' + str(m.balance) + '","' +
str(m.rssi) + '","' + str(m.sysmode) + '","' +
str(m.submode) + '","' + str(m.smsPerc) + '","' +
str(m.sQuality) + '","' + str(m.ping) + '","' +
str(m.dload) + '","' + str(m.uload) + '","new"' + ')')
print cmd
with db:
curs.execute(cmd)
db.close()
except:
print "!!! problems put data to database !!!"
db.close()
sys.exit(1)
#send data to cloud
operator = '"INDOSAT"'
ttyUsbx = 'ttyUSB0'
try:
#get parameter for wvdial
if operator == '"XL"':
op = 'xl'
elif operator == '"TELKOMSEL"':
op = 'telkomsel'
elif operator == '"INDOSAT"':
op = 'indosat'
else:
return
#run wvdial
cmd = "sudo wvdial " + op + " " + ttyUsbx + " &"
subprocess.Popen([cmd], shell=True)
time.sleep(10)
#set default route
subprocess.Popen(['sudo route add default ppp0'], shell=True)
#send data to cloud
sendtocloud = subprocess.Popen(['python firebasepi.py'],
stdout=subprocess.PIPE,
stderr=subprocess.PIPE,
shell=True)
sendtocloud.communicate()
time.sleep(5)
#stop wvdial
cmd = "sudo poff.wvdial " + op + " " + ttyUsbx
subprocess.Popen([cmd], shell=True)
time.sleep(10)
except:
print "!!! sendingdata error !!!"
return
