def setUp(self):
from sas.models.CylinderModel import CylinderModel
from sas.models.HayterMSAStructure import HayterMSAStructure
from sas.models.DiamCylFunc import DiamCylFunc
from sas.models.MultiplicationModel import MultiplicationModel
self.model = CylinderModel()
self.model2 = HayterMSAStructure()
self.model3 = MultiplicationModel(self.model, self.model2)
self.modelD = DiamCylFunc()
class TestHollowCylinder(unittest.TestCase):
""" Unit tests for calculate_ER (Hollowcylinder model) """
def setUp(self):
from sas.models.HollowCylinderModel import HollowCylinderModel
from sas.models.DiamCylFunc import DiamCylFunc
self.comp = HollowCylinderModel()
self.diam = DiamCylFunc()
def test(self):
""" Test 1D model for a Hollowcylinder """
self.comp.setParam("radius", 20)
self.comp.setParam("length",400)
self.diam.setParam("radius", 20)
self.diam.setParam("length",400)
self.assertAlmostEqual(self.comp.calculate_ER(), self.diam.run(0.1)/2)
class TestHollowCylinder(unittest.TestCase):
""" Unit tests for calculate_ER (Hollowcylinder model) """
def setUp(self):
from sas.models.HollowCylinderModel import HollowCylinderModel
from sas.models.DiamCylFunc import DiamCylFunc
self.comp = HollowCylinderModel()
self.diam = DiamCylFunc()
def test(self):
""" Test 1D model for a Hollowcylinder """
self.comp.setParam("radius", 20)
self.comp.setParam("length", 400)
self.diam.setParam("radius", 20)
self.diam.setParam("length", 400)
self.assertAlmostEqual(self.comp.calculate_ER(),
self.diam.run(0.1) / 2)
class TestCoreShellCylinder(unittest.TestCase):
""" Unit tests for calculate_ER (CoreShellcylinder model) """
def setUp(self):
from sas.models.CoreShellCylinderModel import CoreShellCylinderModel
from sas.models.DiamCylFunc import DiamCylFunc
self.comp = CoreShellCylinderModel()
self.diam = DiamCylFunc()
def test(self):
""" Test 1D model for a CoreShellCylinder """
self.comp.setParam("radius", 20)
self.comp.setParam("thickness", 10)
self.comp.setParam("length", 400)
self.diam.setParam("radius", 30)
self.diam.setParam("length", 420)
self.assertAlmostEqual(self.comp.calculate_ER(),
self.diam.run(0.1) / 2)
class TestCoreShellCylinder(unittest.TestCase):
""" Unit tests for calculate_ER (CoreShellcylinder model) """
def setUp(self):
from sas.models.CoreShellCylinderModel import CoreShellCylinderModel
from sas.models.DiamCylFunc import DiamCylFunc
self.comp = CoreShellCylinderModel()
self.diam = DiamCylFunc()
def test(self):
""" Test 1D model for a CoreShellCylinder """
self.comp.setParam("radius", 20)
self.comp.setParam("thickness", 10)
self.comp.setParam("length",400)
self.diam.setParam("radius", 30)
self.diam.setParam("length",420)
self.assertAlmostEqual(self.comp.calculate_ER(), self.diam.run(0.1)/2)
class TestStackedDisksModel(unittest.TestCase):
""" Unit tests for calculate_ER (StackedDisks model) """
def setUp(self):
from sas.models.StackedDisksModel import StackedDisksModel
from sas.models.DiamCylFunc import DiamCylFunc
self.comp = StackedDisksModel()
self.diam = DiamCylFunc()
def test(self):
""" Test 1D model for a StackedDisks """
self.comp.setParam("radius", 3000)
self.comp.setParam("n_stacking", 2)
self.comp.setParam("core_thick",10)
self.comp.setParam("layer_thick", 15)
self.diam.setParam("radius", 3000)
self.diam.setParam("length",80)
self.assertAlmostEqual(self.comp.calculate_ER(), self.diam.run(0.1)/2)
class TestStackedDisksModel(unittest.TestCase):
""" Unit tests for calculate_ER (StackedDisks model) """
def setUp(self):
from sas.models.StackedDisksModel import StackedDisksModel
from sas.models.DiamCylFunc import DiamCylFunc
self.comp = StackedDisksModel()
self.diam = DiamCylFunc()
def test(self):
""" Test 1D model for a StackedDisks """
self.comp.setParam("radius", 3000)
self.comp.setParam("n_stacking", 2)
self.comp.setParam("core_thick", 10)
self.comp.setParam("layer_thick", 15)
self.diam.setParam("radius", 3000)
self.diam.setParam("length", 80)
self.assertAlmostEqual(self.comp.calculate_ER(),
self.diam.run(0.1) / 2)
class TestParallelepiped(unittest.TestCase):
""" Unit tests for calculate_ER (Parallelepipedmodel) """
def setUp(self):
from sas.models.ParallelepipedModel import ParallelepipedModel
from sas.models.DiamCylFunc import DiamCylFunc
self.comp = ParallelepipedModel()
self.diam = DiamCylFunc()
def test(self):
""" Test 1D model for a Parallelepiped """
self.comp.setParam("short_a", 35)
self.comp.setParam("short_b", 75)
self.comp.setParam("long_c",400)
r_value = math.sqrt(35*75/math.pi)
self.diam.setParam("radius", r_value)
self.diam.setParam("length",400)
self.assertAlmostEqual(self.comp.calculate_ER(), self.diam.run(0.1)/2)
class TestEllipticalCylinder(unittest.TestCase):
""" Unit tests for calculate_ER (EllipticalCylindermodel) """
def setUp(self):
from sas.models.EllipticalCylinderModel import EllipticalCylinderModel
from sas.models.DiamCylFunc import DiamCylFunc
self.comp = EllipticalCylinderModel()
self.diam = DiamCylFunc()
def test(self):
""" Test 1D model for a EllipticalCylinder """
self.comp.setParam("r_minor", 20)
self.comp.setParam("r_ratio", 1.5)
self.comp.setParam("length", 400)
r_value = math.sqrt(20 * 20 * 1.5)
self.diam.setParam("radius", r_value)
self.diam.setParam("length", 400)
self.assertAlmostEqual(self.comp.calculate_ER(),
self.diam.run(0.1) / 2)
class TestEllipticalCylinder(unittest.TestCase):
""" Unit tests for calculate_ER (EllipticalCylindermodel) """
def setUp(self):
from sas.models.EllipticalCylinderModel import EllipticalCylinderModel
from sas.models.DiamCylFunc import DiamCylFunc
self.comp = EllipticalCylinderModel()
self.diam = DiamCylFunc()
def test(self):
""" Test 1D model for a EllipticalCylinder """
self.comp.setParam("r_minor", 20)
self.comp.setParam("r_ratio",1.5)
self.comp.setParam("length",400)
r_value = math.sqrt(20*20*1.5)
self.diam.setParam("radius", r_value)
self.diam.setParam("length",400)
self.assertAlmostEqual(self.comp.calculate_ER(), self.diam.run(0.1)/2)
class TestParallelepiped(unittest.TestCase):
""" Unit tests for calculate_ER (Parallelepipedmodel) """
def setUp(self):
from sas.models.ParallelepipedModel import ParallelepipedModel
from sas.models.DiamCylFunc import DiamCylFunc
self.comp = ParallelepipedModel()
self.diam = DiamCylFunc()
def test(self):
""" Test 1D model for a Parallelepiped """
self.comp.setParam("short_a", 35)
self.comp.setParam("short_b", 75)
self.comp.setParam("long_c", 400)
r_value = math.sqrt(35 * 75 / math.pi)
self.diam.setParam("radius", r_value)
self.diam.setParam("length", 400)
self.assertAlmostEqual(self.comp.calculate_ER(),
self.diam.run(0.1) / 2)
def setUp(self):
from sas.models.CylinderModel import CylinderModel
from sas.models.HayterMSAStructure import HayterMSAStructure
from sas.models.DiamCylFunc import DiamCylFunc
from sas.models.MultiplicationModel import MultiplicationModel
self.model = CylinderModel()
self.model2 = HayterMSAStructure()
self.model3 = MultiplicationModel(self.model, self.model2)
self.modelD = DiamCylFunc()
def setUp(self):
from sas.models.SphereModel import SphereModel
from sas.models.HardsphereStructure import HardsphereStructure
from sas.models.DiamCylFunc import DiamCylFunc
from sas.models.MultiplicationModel import MultiplicationModel
self.model = SphereModel()
self.model2 = HardsphereStructure()
self.model3 = MultiplicationModel(self.model, self.model2)
self.modelD = DiamCylFunc()
class TestcylinderHayterM(unittest.TestCase):
"""
Unit tests for CylinderModel(Q) * HayterMSAStructure(Q)
"""
def setUp(self):
from sas.models.CylinderModel import CylinderModel
from sas.models.HayterMSAStructure import HayterMSAStructure
from sas.models.DiamCylFunc import DiamCylFunc
from sas.models.MultiplicationModel import MultiplicationModel
self.model = CylinderModel()
self.model2 = HayterMSAStructure()
self.model3 = MultiplicationModel(self.model, self.model2)
self.modelD = DiamCylFunc()
#Radius of model1.calculate_ER should be equal to the output/2 of DiamFunctions
def test_multplication_radius(self):
"""
test multiplication model (check the effective radius & the output
of the multiplication)
"""
self.model.setParam("radius", 60)
self.modelD.setParam("radius", 60)
modelDrun = self.modelD.run(0.1)/2
self.model2.setParam("volfraction", 0.2)
self.model2.setParam("effect_radius", modelDrun )
#Compare new method with old method
self.assertEqual(self.model3.run(0.1), self.model.run(0.1)*self.model2.run(0.1))
#Compare radius from two different calculations. Note: modelD.run(0.0) is DIAMETER
self.assertEqual(self.model.calculate_ER(), modelDrun)
def testMultiplicationParam(self):
""" Test Multiplication (check the parameters)"""
## test details dictionary
## test parameters list
list3= self.model3.getParamList()
for item in self.model.getParamList():
if not 'scale' in item:
self.assert_(item in list3)
for item in self.model2.getParamList():
#model3 parameters should not include effect_radius*
if not 'effect_radius' in item:
self.assert_(item in list3)
## test set value for parameters and get paramaters
#self.model3.setParam("scale", 15)
#self.assertEqual(self.model3.getParam("scale"), 15)
self.model3.setParam("scale_factor", 15)
self.assertEqual(self.model3.getParam("scale_factor"), 15)
self.model3.setParam("radius", 20)
self.assertEqual(self.model3.getParam("radius"), 20)
self.model3.setParam("radius.width", 15)
self.assertEqual(self.model3.getParam("radius.width"), 15)
self.model3.setParam("scale_factor", 15)
self.assertEqual(self.model3.getParam("scale_factor"), 15)
self.assertEqual(self.model3.getParam("volfraction"), self.model.getParam("scale"))
## Dispersity
list3= self.model3.getDispParamList()
self.assertEqual(list3, ['radius.npts', 'radius.nsigmas', 'radius.width', 'length.npts', \
'length.nsigmas', 'length.width', 'cyl_theta.npts', 'cyl_theta.nsigmas', 'cyl_theta.width',\
'cyl_phi.npts', 'cyl_phi.nsigmas', 'cyl_phi.width'])
from sas.models.dispersion_models import ArrayDispersion
disp_th = ArrayDispersion()
values_th = numpy.zeros(100)
weights = numpy.zeros(100)
for i in range(100):
values_th[i]=(math.pi/99.0*i)
weights[i]=(1.0)
disp_th.set_weights(values_th, weights)
self.model3.set_dispersion('radius', disp_th)
model4= self.model3.clone()
self.assertEqual(model4.getParam("radius"), 20)
def setUp(self):
from sas.models.StackedDisksModel import StackedDisksModel
from sas.models.DiamCylFunc import DiamCylFunc
self.comp = StackedDisksModel()
self.diam = DiamCylFunc()
def setUp(self):
from sas.models.ParallelepipedModel import ParallelepipedModel
from sas.models.DiamCylFunc import DiamCylFunc
self.comp = ParallelepipedModel()
self.diam = DiamCylFunc()
def setUp(self):
from sas.models.EllipticalCylinderModel import EllipticalCylinderModel
from sas.models.DiamCylFunc import DiamCylFunc
self.comp = EllipticalCylinderModel()
self.diam = DiamCylFunc()
def setUp(self):
from sas.models.EllipticalCylinderModel import EllipticalCylinderModel
from sas.models.DiamCylFunc import DiamCylFunc
self.comp = EllipticalCylinderModel()
self.diam = DiamCylFunc()
def setUp(self):
from sas.models.StackedDisksModel import StackedDisksModel
from sas.models.DiamCylFunc import DiamCylFunc
self.comp = StackedDisksModel()
self.diam = DiamCylFunc()
def setUp(self):
from sas.models.ParallelepipedModel import ParallelepipedModel
from sas.models.DiamCylFunc import DiamCylFunc
self.comp = ParallelepipedModel()
self.diam = DiamCylFunc()
def setUp(self):
from sas.models.HollowCylinderModel import HollowCylinderModel
from sas.models.DiamCylFunc import DiamCylFunc
self.comp = HollowCylinderModel()
self.diam = DiamCylFunc()
def setUp(self):
from sas.models.HollowCylinderModel import HollowCylinderModel
from sas.models.DiamCylFunc import DiamCylFunc
self.comp = HollowCylinderModel()
self.diam = DiamCylFunc()
def setUp(self):
from sas.models.CoreShellCylinderModel import CoreShellCylinderModel
from sas.models.DiamCylFunc import DiamCylFunc
self.comp = CoreShellCylinderModel()
self.diam = DiamCylFunc()
def setUp(self):
from sas.models.CoreShellCylinderModel import CoreShellCylinderModel
from sas.models.DiamCylFunc import DiamCylFunc
self.comp = CoreShellCylinderModel()
self.diam = DiamCylFunc()
class TestcylinderHayterM(unittest.TestCase):
"""
Unit tests for CylinderModel(Q) * HayterMSAStructure(Q)
"""
def setUp(self):
from sas.models.CylinderModel import CylinderModel
from sas.models.HayterMSAStructure import HayterMSAStructure
from sas.models.DiamCylFunc import DiamCylFunc
from sas.models.MultiplicationModel import MultiplicationModel
self.model = CylinderModel()
self.model2 = HayterMSAStructure()
self.model3 = MultiplicationModel(self.model, self.model2)
self.modelD = DiamCylFunc()
#Radius of model1.calculate_ER should be equal to the output/2 of DiamFunctions
def test_multplication_radius(self):
"""
test multiplication model (check the effective radius & the output
of the multiplication)
"""
self.model.setParam("radius", 60)
self.modelD.setParam("radius", 60)
modelDrun = self.modelD.run(0.1)/2
self.model2.setParam("volfraction", 0.2)
self.model2.setParam("effect_radius", modelDrun )
#Compare new method with old method
self.assertEqual(self.model3.run(0.1), self.model.run(0.1)*self.model2.run(0.1))
#Compare radius from two different calculations. Note: modelD.run(0.0) is DIAMETER
self.assertEqual(self.model.calculate_ER(), modelDrun)
def testMultiplicationParam(self):
""" Test Multiplication (check the parameters)"""
## test details dictionary
## test parameters list
list3= self.model3.getParamList()
for item in self.model.getParamList():
if not 'scale' in item:
self.assert_(item in list3)
for item in self.model2.getParamList():
#model3 parameters should not include effect_radius*
if not 'effect_radius' in item:
self.assert_(item in list3)
## test set value for parameters and get paramaters
#self.model3.setParam("scale", 15)
#self.assertEqual(self.model3.getParam("scale"), 15)
self.model3.setParam("scale_factor", 15)
self.assertEqual(self.model3.getParam("scale_factor"), 15)
self.model3.setParam("radius", 20)
self.assertEqual(self.model3.getParam("radius"), 20)
self.model3.setParam("radius.width", 15)
self.assertEqual(self.model3.getParam("radius.width"), 15)
self.model3.setParam("scale_factor", 15)
self.assertEqual(self.model3.getParam("scale_factor"), 15)
self.assertEqual(self.model3.getParam("volfraction"), self.model.getParam("scale"))
## Dispersity
list3= self.model3.getDispParamList()
self.assertEqual(list3, ['radius.npts', 'radius.nsigmas', 'radius.width', 'length.npts', \
'length.nsigmas', 'length.width', 'cyl_theta.npts', 'cyl_theta.nsigmas', 'cyl_theta.width',\
'cyl_phi.npts', 'cyl_phi.nsigmas', 'cyl_phi.width'])
from sas.models.dispersion_models import ArrayDispersion
disp_th = ArrayDispersion()
values_th = numpy.zeros(100)
weights = numpy.zeros(100)
for i in range(100):
values_th[i]=(math.pi/99.0*i)
weights[i]=(1.0)
disp_th.set_weights(values_th, weights)
self.model3.set_dispersion('radius', disp_th)
model4= self.model3.clone()
self.assertEqual(model4.getParam("radius"), 20)
