def execute(env):
"""Perform pre-stage tasks for running a component.
Parameters
----------
env : dict
A dict of component parameter values from WMT.
"""
env['n_steps'] = int(round(float(env['_run_duration']) / float(env['dt'])))
env['save_grid_dt'] = float(env['dt'])
env['save_pixels_dt'] = float(env['dt'])
assign_parameters(env, file_list)
for fname in file_list:
src = find_simulation_input_file(env[fname])
shutil.copy(src, os.curdir)
# src = find_simulation_input_file(env['site_prefix'] + '.rti')
# shutil.copy(src, os.path.join(os.curdir, env['site_prefix'] + '.rti'))
src = find_simulation_input_file(env['rti_file'])
shutil.copy(src, os.path.join(os.curdir, env['site_prefix'] + '.rti'))
for var in ('rho_snow', 'c0', 'T0', 'h0_snow', 'h0_swe'):
if env[var + '_ptype'] == 'Scalar':
scalar_to_rtg_file(var, env)
def execute(env):
"""Perform pre-stage tasks for running a component.
Parameters
----------
env : dict
A dict of component parameter values from WMT.
"""
env["n_steps"] = int(round(float(env["_run_duration"]) / float(env["dt"])))
env["save_grid_dt"] = float(env["dt"])
env["save_pixels_dt"] = float(env["dt"])
env["n_layers"] = 1 # my choice
# If no pixel_file is given, let TopoFlow make one.
if env["pixel_file"] == "off":
env["pixel_file"] = env["case_prefix"] + "_outlets.txt"
assign_parameters(env, file_list)
env["soil_type_0"] = lowercase_choice(env["soil_type_0"])
for fname in file_list:
src = find_simulation_input_file(env[fname])
shutil.copy(src, os.curdir)
src = find_simulation_input_file(env["site_prefix"] + ".rti")
shutil.copy(src, os.path.join(os.curdir, env["site_prefix"] + ".rti"))
for var in ("Ks_0", "Ki_0", "qs_0", "qi_0", "G_0"):
if env[var + "_ptype"] == "Scalar":
scalar_to_rtg_file(var, env)
def execute(env):
"""Perform pre-stage tasks for running a component.
Parameters
----------
env : dict
A dict of component parameter values from WMT.
"""
env['n_steps'] = int(round(float(env['_run_duration']) / float(env['dt'])))
env['save_grid_dt'] = float(env['dt'])
env['save_pixels_dt'] = float(env['dt'])
# If no pixel_file is given, let TopoFlow make one.
if env['pixel_file'] == 'off':
env['pixel_file'] = env['case_prefix'] + '_outlets.txt'
assign_parameters(env, file_list)
for fname in file_list:
src = find_simulation_input_file(env[fname])
shutil.copy(src, os.curdir)
src = find_simulation_input_file(env['site_prefix'] + '.rti')
shutil.copy(src, os.path.join(os.curdir, env['site_prefix'] + '.rti'))
for var in ('alpha', 'K_soil', 'soil_x', 'T_soil_x'):
if env[var + '_ptype'] == 'Scalar':
scalar_to_rtg_file(var, env)
def execute(env):
"""Perform pre-stage tasks for running a component.
Parameters
----------
env : dict
A dict of component parameter values from WMT.
"""
env['n_steps'] = int(round(float(env['_run_duration']) / float(env['dt'])))
env['save_grid_dt'] = float(env['dt'])
env['save_pixels_dt'] = float(env['dt'])
# If no pixel_file is given, let TopoFlow make one.
if env['pixel_file'] == 'off':
env['pixel_file'] = env['case_prefix'] + '_outlets.txt'
# Translate the roughness choice to TopoFlow flags.
env['MANNING'] = env['roughness_option'].startswith('Manning') * 1
env['LAW_OF_WALL'] = 1 - env['MANNING']
assign_parameters(env, file_list)
for fname in file_list:
src = find_simulation_input_file(env[fname])
shutil.copy(src, os.curdir)
src = find_simulation_input_file(env['code_file'])
env['code_file'] = env['site_prefix'] + '_flow.rtg'
shutil.copy(src, os.path.join(os.curdir, env['code_file']))
src = find_simulation_input_file(env['slope_file'])
env['slope_file'] = env['site_prefix'] + '_slope.rtg'
shutil.copy(src, os.path.join(os.curdir, env['slope_file']))
# src = find_simulation_input_file(env['site_prefix'] + '.rti')
# shutil.copy(src, os.path.join(os.curdir, env['site_prefix'] + '.rti'))
src = find_simulation_input_file(env['rti_file'])
shutil.copy(src, os.path.join(os.curdir, env['site_prefix'] + '.rti'))
env['A_units'] = units_map[env['A_units']]
for var in ('LINK_FLATS', 'FILL_PITS_IN_Z0', 'LR_PERIODIC',
'TB_PERIODIC'): env[var] = choices_map[env[var]]
for var in ('width', 'angle', 'roughness', 'd0', 'sinu'):
if env[var + '_ptype'] == 'Scalar':
scalar_to_rtg_file(var, env)
for var in ('nval', 'z0val'):
env[var + '_ptype'] = env['roughness_ptype']
env[var + '_dtype'] = env['roughness_dtype']
env[var] = env['roughness']
env[var + '_file'] = env['roughness_file']
def execute(env):
"""Perform pre-stage tasks for running a component.
Parameters
----------
env : dict
A dict of component parameter values from WMT.
"""
env["n_steps"] = int(round(float(env["_run_duration"]) / float(env["dt"])))
env["save_grid_dt"] = float(env["dt"])
env["save_pixels_dt"] = float(env["dt"])
# If no pixel_file is given, let TopoFlow make one.
if env["pixel_file"] == "off":
env["pixel_file"] = env["case_prefix"] + "_outlets.txt"
# Translate the roughness choice to TopoFlow flags.
env["MANNING"] = env["roughness_option"].startswith("Manning") * 1
env["LAW_OF_WALL"] = 1 - env["MANNING"]
assign_parameters(env, file_list)
# for fname in ['code_file', 'slope_file'] + file_list:
for fname in file_list:
src = find_simulation_input_file(env[fname])
shutil.copy(src, os.curdir)
# src = find_simulation_input_file(env['site_prefix'] + '.rti')
# shutil.copy(src, os.path.join(os.curdir, env['site_prefix'] + '.rti'))
src = find_simulation_input_file(env["code_file"])
env["code_file"] = env["site_prefix"] + "_flow.rtg"
shutil.copy(src, os.path.join(os.curdir, env["code_file"]))
src = find_simulation_input_file(env["slope_file"])
env["slope_file"] = env["site_prefix"] + "_slope.rtg"
shutil.copy(src, os.path.join(os.curdir, env["slope_file"]))
src = find_simulation_input_file(env["rti_file"])
shutil.copy(src, os.path.join(os.curdir, env["site_prefix"] + ".rti"))
env["A_units"] = units_map[env["A_units"]]
for var in ("LINK_FLATS", "FILL_PITS_IN_Z0", "LR_PERIODIC", "TB_PERIODIC"):
env[var] = choices_map[env[var]]
for var in ("width", "angle", "roughness", "d0", "sinu"):
if env[var + "_ptype"] == "Scalar":
scalar_to_rtg_file(var, env)
for var in ("nval", "z0val"):
env[var + "_ptype"] = env["roughness_ptype"]
env[var + "_dtype"] = env["roughness_dtype"]
env[var] = env["roughness"]
env[var + "_file"] = env["roughness_file"]
def execute(env):
"""Perform pre-stage tasks for running a component.
Parameters
----------
env : dict
A dict of component parameter values from WMT.
"""
env['n_steps'] = int(round(float(env['_run_duration']) / float(env['dt'])))
env['save_grid_dt'] = float(env['dt'])
env['save_pixels_dt'] = float(env['dt'])
env['save_profile_dt'] = float(env['dt'])
env['save_cube_dt'] = float(env['dt'])
env['n_layers'] = 1 # my choice
# If no pixel_file is given, let TopoFlow make one.
if env['pixel_file'] == 'off':
env['pixel_file'] = env['case_prefix'] + '_outlets.txt'
assign_parameters(env, file_list)
env['soil_0_type'] = lowercase_choice(env['soil_0_type'])
env['soil_1_type'] = lowercase_choice(env['soil_1_type'])
env['soil_2_type'] = lowercase_choice(env['soil_2_type'])
for fname in file_list:
src = find_simulation_input_file(env[fname])
shutil.copy(src, os.curdir)
src = find_simulation_input_file(env['site_prefix'] + '.rti')
shutil.copy(src, os.path.join(os.curdir, env['site_prefix'] + '.rti'))
for var in ('Ks_val_0', 'Ki_val_0', 'qs_val_0', 'qi_val_0', 'qr_val_0',
'pB_val_0', 'pA_val_0', 'lam_val_0', 'c_val_0', 'Ks_val_1',
'Ki_val_1', 'qs_val_1', 'qi_val_1', 'qr_val_1', 'pB_val_1',
'pA_val_1', 'lam_val_1', 'c_val_1', 'Ks_val_2', 'Ki_val_2',
'qs_val_2', 'qi_val_2', 'qr_val_2', 'pB_val_2', 'pA_val_2',
'lam_val_2', 'c_val_2'):
if env[var + '_ptype'] == 'Scalar':
scalar_to_rtg_file(var, env)
def execute(env):
"""Perform pre-stage tasks for running a component.
Parameters
----------
env : dict
A dict of component parameter values from WMT.
"""
env['n_steps'] = int(round(float(env['_run_duration']) / float(env['dt'])))
env['save_grid_dt'] = float(env['dt'])
env['save_pixels_dt'] = float(env['dt'])
env['n_layers'] = 3 # my choice
# If no pixel_file is given, let TopoFlow make one.
if env['pixel_file'] == 'off':
env['pixel_file'] = env['case_prefix'] + '_outlets.txt'
assign_parameters(env, file_list)
for fname in file_list:
src = find_simulation_input_file(env[fname])
shutil.copy(src, os.curdir)
# src = find_simulation_input_file(env['site_prefix'] + '.rti')
# shutil.copy(src, os.path.join(os.curdir, env['site_prefix'] + '.rti'))
src = find_simulation_input_file(env['flow_grid_file'])
env['flow_grid_file'] = env['site_prefix'] + '_flow.rtg'
shutil.copy(src, os.path.join(os.curdir, env['flow_grid_file']))
src = find_simulation_input_file(env['rti_file'])
shutil.copy(src, os.path.join(os.curdir, env['site_prefix'] + '.rti'))
for var in ('elev', 'h0_table', 'd_freeze', 'd_thaw', 'Ks_0', 'qs_0',
'th_0', 'Ks_1', 'qs_1', 'th_1', 'Ks_2', 'qs_2', 'th_2'):
if env[var + '_ptype'] == 'Scalar':
scalar_to_rtg_file(var, env)
def execute(env):
"""Perform pre-stage tasks for running a component.
Parameters
----------
env : dict
A dict of component parameter values from WMT.
"""
env['n_steps'] = int(round(float(env['_run_duration']) / float(env['dt'])))
env['save_grid_dt'] = float(env['dt'])
env['save_pixels_dt'] = float(env['dt'])
# If no pixel_file is given, let TopoFlow make one.
if env['pixel_file'] == 'off':
env['pixel_file'] = env['case_prefix'] + '_outlets.txt'
assign_parameters(env, file_list)
for fname in file_list:
src = find_simulation_input_file(env[fname])
shutil.copy(src, os.curdir)
# src = find_simulation_input_file(env['site_prefix'] + '.rti')
# shutil.copy(src, os.path.join(os.curdir, env['site_prefix'] + '.rti'))
src = find_simulation_input_file(env['rti_file'])
shutil.copy(src, os.path.join(os.curdir, env['site_prefix'] + '.rti'))
for var in ('rho_H2O', 'Cp_air', 'rho_air', 'T_air', 'T_surf',
'RH', 'p0', 'uz', 'z', 'z0_air', 'albedo', 'em_surf',
'dust_atten', 'cloud_factor', 'canopy_factor'):
if env[var + '_ptype'] == 'Scalar':
scalar_to_rtg_file(var, env)
if env['P_ptype'] != 'Grid_Sequence':
to_rts_file('P', env)
