The Universal Mega Dumper (UMD) is a game catridge read/writer project designed around a Teensy++ microcontroller. The universality comes from the UMD's ability to support many different types of catridge connectors by having general purpose 16 bit data and 24 bit address paths along with a dozen control signals - all of which can be customized for each game cartridge mode.

Moving forward, each UMD adapter will contain an 8 bit shift register which the UMD firmware can use to identify the currently connected UMD Adapter and cartridge type.

• 0x01 - NES
• 0x02 - Commodore 64
• 0x03 - SNES

Teensy is an Arduino compatible, but much better, microcontroller board. To use Teensy, head to the PJRC website and download the latest version of Teensyduino. Don't install it yet!

Be sure to note the latest supported version of the Arduino IDE from the PJRC website as this is the version you will need to download from the Arduino website.

Download the latest Arduino IDE version supported by Teensyduino as noted on the Teensy website. Extract the Arduino IDE. If you are running Linux like me you will have to make the install.sh executable (chmod +x install.sh) in order to install once extracted.

Browse to the location where you downloaded Teensyduino. If you are using Linux, make the file executable (chmod +x) and then run it. The installer will ask you to specify the directory where you extracted the Arduino IDE. Follow the instructions to finalize the installtion.

If you are using linux, you will need to perform this step. Create a file called 49-teensy.rules with the following contents

ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="04[789B]?", ENV{ID_MM_DEVICE_IGNORE}="1"
ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="04[789A]?", ENV{MTP_NO_PROBE}="1"
SUBSYSTEMS=="usb", ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="04[789ABCD]?", MODE:="0666"
KERNEL=="ttyACM*", ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="04[789B]?", MODE:="0666"

Next, copy this file to /etc/udev/rules.d/

sudo cp 49-teensy.rules /etc/udev/rules.d/

Now trigger udev to re-evaluate the rules

sudo udevadm trigger

If you have any issues with the Arduino IDE or teensyduino detecting the board, reboot.

You can use the default Arduino library directory, which is ~/Arduino/libraries. If you're ok with this, clone this and the required libraries there, and ignore the rest of this section.

If you don't want to use the default, open the Arduino IDE and go to File->Preferences.

In the "Sketchbook location" field, change it to the directory you plan to clone the UMD repository and dependent libraries.

For example:

/home/username/projects/umd

The libraries directory under this directory is where you should clone this repository and the required Arduino libraries.

For linux users, python3 is more likely than not already installed in your distro. UMD depends on pyserial, run the following commands to install it.

sudo apt install python3-pip
python3 -m pip install pyserial 

UMD depends on a several Arduino libraries which need to be added to your Arduino/libraries folder explicitely. Installing these two libraries will allow you to build the Teensy firmware.

I have forked Arduino Serial Command and made a few modifications. Clone the Arduino Serial Command repo into your Arudino/libraries folder.

git clone https://github.com/db-electronics/ArduinoSerialCommand

Paul Stoffregen, the creator of Teensy, provides a very good SPI Serial Flash library with a rudimentary filesystem. Clone the Serial Flash repo into your Arduino/libraries folder.

git clone https://github.com/PaulStoffregen/SerialFlash

You should have a directory layout like this:

libraries/ArduinoSerialCommand
libraries/SerialFlash
libraries/Universal-Mega-Dumper

1. In the Arduino IDE, select Tools->Board->Teensy++2.0
2. Open the sketch Universal-Mega-Dumper/Examples/Interface.ino
3. Click the Verify (checkbox) button.
4. Press the button on the teensy A teensy window should open showing that it's programming and rebooting. If not, click the upload button.