mytest.py

# kate: replace-tabs off; indent-width 8; remove-trailing-spaces all; show-tabs on; newline-at-eof on;

import sys
import os
from time import time

if os.path.isfile("/usr/lib/enigma2/python/enigma.zip"):
	sys.path.append("/usr/lib/enigma2/python/enigma.zip")

from Tools.Profile import profile, profile_final
profile("PYTHON_START")

# Don't remove this line. It may seem to do nothing, but if removed,
# it will break output redirection for crash logs.
import Tools.RedirectOutput
import enigma
from boxbranding import getBoxType, getMachineProcModel, getMachineBuild
import eConsoleImpl
import eBaseImpl
enigma.eTimer = eBaseImpl.eTimer
enigma.eSocketNotifier = eBaseImpl.eSocketNotifier
enigma.eConsoleAppContainer = eConsoleImpl.eConsoleAppContainer

from traceback import print_exc

profile("ClientMode")
import Components.ClientMode
Components.ClientMode.InitClientMode()

profile("SimpleSummary")
from Screens import InfoBar
from Screens.SimpleSummary import SimpleSummary

from sys import stdout, exc_info

profile("Bouquets")
from Components.config import config, configfile, ConfigText, ConfigYesNo, ConfigInteger, NoSave
config.misc.load_unlinked_userbouquets = ConfigYesNo(default=False)
def setLoadUnlinkedUserbouquets(configElement):
	enigma.eDVBDB.getInstance().setLoadUnlinkedUserbouquets(configElement.value)
config.misc.load_unlinked_userbouquets.addNotifier(setLoadUnlinkedUserbouquets)
if config.clientmode.enabled.value == False:
	enigma.eDVBDB.getInstance().reloadBouquets()

profile("ParentalControl")
import Components.ParentalControl
Components.ParentalControl.InitParentalControl()

profile("LOAD:Navigation")
from Navigation import Navigation

profile("LOAD:skin")
from skin import readSkin

profile("LOAD:Tools")
from Tools.Directories import InitFallbackFiles, resolveFilename, SCOPE_PLUGINS, SCOPE_ACTIVE_SKIN, SCOPE_CURRENT_SKIN, SCOPE_CONFIG
from Components.config import config, configfile, ConfigText, ConfigYesNo, ConfigInteger, ConfigSelection, NoSave, ConfigSubsection
InitFallbackFiles()

profile("LOAD:RecordTimer")
import RecordTimer

profile("config.misc")
config.misc.blackradiopic = ConfigText(default=resolveFilename(SCOPE_ACTIVE_SKIN, "black.mvi"))
radiopic = resolveFilename(SCOPE_ACTIVE_SKIN, "radio.mvi")
if os.path.exists(resolveFilename(SCOPE_CONFIG, "radio.mvi")):
	radiopic = resolveFilename(SCOPE_CONFIG, "radio.mvi")
config.misc.radiopic = ConfigText(default=radiopic)
config.misc.isNextRecordTimerAfterEventActionAuto = ConfigYesNo(default=False)
config.misc.isNextPowerTimerAfterEventActionAuto = ConfigYesNo(default=False)
config.misc.SyncTimeUsing = ConfigSelection(default="0", choices=[
	("0", _("TV broadcast")),
	("1", _("NTP (Internet)"))])
config.misc.NTPserver = ConfigText(default='au.pool.ntp.org', fixed_size=False)

config.misc.startCounter = ConfigInteger(default=0)  # number of e2 starts...
config.misc.standbyCounter = NoSave(ConfigInteger(default=0))  # number of standby
config.misc.DeepStandby = NoSave(ConfigYesNo(default=False))  # detect deepstandby

profile("FanControl")
from Components.FanControl import fancontrol

# demo code for use of standby enter leave callbacks
# def leaveStandby():
# 	print "!!!!!!!!!!!!!!!!!leave standby"

# def standbyCountChanged(configelement):
# 	print "!!!!!!!!!!!!!!!!!enter standby num", configelement.value
# 	from Screens.Standby import inStandby
# 	inStandby.onClose.append(leaveStandby)

# config.misc.standbyCounter.addNotifier(standbyCountChanged, initial_call = False)
####################################################

def useSyncUsingChanged(configelement):
	if configelement.value == "0":
		print "[Time By]: Transponder"
		enigma.eDVBLocalTimeHandler.getInstance().setUseDVBTime(True)
		enigma.eEPGCache.getInstance().timeUpdated()
	else:
		print "[Time By]: NTP"
		enigma.eDVBLocalTimeHandler.getInstance().setUseDVBTime(False)
		enigma.eEPGCache.getInstance().timeUpdated()
config.misc.SyncTimeUsing.addNotifier(useSyncUsingChanged)

def NTPserverChanged(configelement):
	if configelement.value == "au.pool.ntp.org":
		return
	f = open("/etc/default/ntpdate", "w")
	f.write('NTPSERVERS="' + configelement.value + '"\n')
	f.close()
	os.chmod("/etc/default/ntpdate", 0755)
	from Components.Console import Console
	Console = Console()
	Console.ePopen('/usr/bin/ntpdate-sync')
config.misc.NTPserver.addNotifier(NTPserverChanged, immediate_feedback=True)

profile("Twisted")
try:
	import e2reactor
	e2reactor.install()

	from twisted.internet import reactor

	def runReactor():
		reactor.run(installSignalHandlers=False)
except ImportError:
	print "twisted not available"

	def runReactor():
		enigma.runMainloop()

profile("LOAD:Plugin")

# initialize autorun plugins and plugin menu entries
from Components.PluginComponent import plugins

profile("LOAD:Wizard")
from Screens.Wizard import wizardManager
from Screens.StartWizard import *
import Screens.Rc
from Tools.BoundFunction import boundFunction
from Plugins.Plugin import PluginDescriptor

from Tools.FlashInstall import FlashInstallTime
FlashInstallTime()

profile("misc")
had = dict()

def dump(d, p=""):
	if isinstance(d, dict):
		for (entry, val) in d.items():
			dump(val, p + "(dict)/" + entry)
	if hasattr(d, "__dict__"):
		for name, value in d.__dict__.items():
			if str(value) not in had:
				had[str(value)] = 1
				dump(value, p + "/" + str(name))
			else:
				print p + "/" + str(name) + ":" + str(d.__class__) + "(cycle)"
	else:
		print p + ":" + str(d)

# + ":" + str(d.__class__)

# display

profile("LOAD:ScreenGlobals")
from Screens.Globals import Globals
from Screens.SessionGlobals import SessionGlobals
from Screens.Screen import Screen

profile("Screen")
Screen.global_screen = Globals()

# Session.open:
# * push current active dialog ('current_dialog') onto stack
# * call execEnd for this dialog
#   * clear in_exec flag
#   * hide screen
# * instantiate new dialog into 'current_dialog'
#   * create screens, components
#   * read, apply skin
#   * create GUI for screen
# * call execBegin for new dialog
#   * set in_exec
#   * show gui screen
#   * call components' / screen's onExecBegin
# ... screen is active, until it calls 'close'...
# Session.close:
# * assert in_exec
# * save return value
# * start deferred close handler ('onClose')
# * execEnd
#   * clear in_exec
#   * hide screen
# .. a moment later:
# Session.doClose:
# * destroy screen

class Session:
	def __init__(self, desktop=None, summary_desktop=None, navigation=None):
		self.desktop = desktop
		self.summary_desktop = summary_desktop
		self.nav = navigation
		self.delay_timer = enigma.eTimer()
		self.delay_timer.callback.append(self.processDelay)

		self.current_dialog = None

		self.dialog_stack = []
		self.summary_stack = []
		self.summary = None

		self.in_exec = False

		self.screen = SessionGlobals(self)

		for p in plugins.getPlugins(PluginDescriptor.WHERE_SESSIONSTART):
			try:
				p(reason=0, session=self)
			except:
				print "Plugin raised exception at WHERE_SESSIONSTART"
				import traceback
				traceback.print_exc()

	def processDelay(self):
		callback = self.current_dialog.callback

		retval = self.current_dialog.returnValue

		if self.current_dialog.isTmp:
			self.current_dialog.doClose()
			# dump(self.current_dialog)
			del self.current_dialog
		else:
			del self.current_dialog.callback

		self.popCurrent()
		if callback is not None:
			callback(*retval)

	def execBegin(self, first=True, do_show=True):
		if self.in_exec:
			raise AssertionError("already in exec")
		self.in_exec = True
		c = self.current_dialog

		# when this is an execbegin after a execend of a "higher" dialog,
		# popSummary already did the right thing.
		if first:
			self.instantiateSummaryDialog(c)

		c.saveKeyboardMode()
		c.execBegin()

		# when execBegin opened a new dialog, don't bother showing the old one.
		if c == self.current_dialog and do_show:
			c.show()

	def execEnd(self, last=True):
		if not self.in_exec:
			raise AssertionError("not in exec")

		self.in_exec = False

		self.current_dialog.execEnd()
		self.current_dialog.restoreKeyboardMode()
		self.current_dialog.hide()

		if last and self.summary is not None:
			self.current_dialog.removeSummary(self.summary)
			self.popSummary()

	def instantiateDialog(self, screen, *arguments, **kwargs):
		return self.doInstantiateDialog(screen, arguments, kwargs, self.desktop)

	def deleteDialog(self, screen):
		screen.hide()
		screen.doClose()

	def deleteDialogWithCallback(self, callback, screen, *retval):
		screen.hide()
		screen.doClose()
		if callback is not None:
			callback(*retval)

	def instantiateSummaryDialog(self, screen, **kwargs):
		if self.summary_desktop is not None:
			self.pushSummary()
			summary = screen.createSummary() or SimpleSummary
			arguments = (screen,)
			self.summary = self.doInstantiateDialog(summary, arguments, kwargs, self.summary_desktop)
			self.summary.show()
			screen.addSummary(self.summary)

	def doInstantiateDialog(self, screen, arguments, kwargs, desktop):
		# create dialog
		dlg = screen(self, *arguments, **kwargs)
		if dlg is None:
			return
		# read skin data
		readSkin(dlg, None, dlg.skinName, desktop)
		# create GUI view of this dialog
		dlg.setDesktop(desktop)
		dlg.applySkin()
		return dlg

	def pushCurrent(self):
		if self.current_dialog is not None:
			self.dialog_stack.append((self.current_dialog, self.current_dialog.shown))
			self.execEnd(last=False)

	def popCurrent(self):
		if self.dialog_stack:
			(self.current_dialog, do_show) = self.dialog_stack.pop()
			self.execBegin(first=False, do_show=do_show)
		else:
			self.current_dialog = None

	def execDialog(self, dialog):
		self.pushCurrent()
		self.current_dialog = dialog
		self.current_dialog.isTmp = False
		self.current_dialog.callback = None  # would cause re-entrancy problems.
		self.execBegin()

	def openWithCallback(self, callback, screen, *arguments, **kwargs):
		dlg = self.open(screen, *arguments, **kwargs)
		dlg.callback = callback
		return dlg

	def open(self, screen, *arguments, **kwargs):
		if self.dialog_stack and not self.in_exec:
			raise RuntimeError("modal open are allowed only from a screen which is modal!")
			# ...unless it's the very first screen.

		self.pushCurrent()
		dlg = self.current_dialog = self.instantiateDialog(screen, *arguments, **kwargs)
		dlg.isTmp = True
		dlg.callback = None
		self.execBegin()
		return dlg

	def close(self, screen, *retval):
		if not self.in_exec:
			print "close after exec!"
			return

		# be sure that the close is for the right dialog!
		# if it's not, you probably closed after another dialog
		# was opened. this can happen if you open a dialog
		# onExecBegin, and forget to do this only once.
		# after close of the top dialog, the underlying will
		# gain focus again (for a short time), thus triggering
		# the onExec, which opens the dialog again, closing the loop.
		if not screen == self.current_dialog:
			raise AssertionError("Attempt to close non-current screen")

		self.current_dialog.returnValue = retval
		self.delay_timer.start(0, 1)
		self.execEnd()

	def pushSummary(self):
		if self.summary is not None:
			self.summary.hide()
			self.summary_stack.append(self.summary)
			self.summary = None

	def popSummary(self):
		if self.summary is not None:
			self.summary.doClose()
		if not self.summary_stack:
			self.summary = None
		else:
			self.summary = self.summary_stack.pop()
		if self.summary is not None:
			self.summary.show()

profile("Standby,PowerKey")
import Screens.Standby
from Screens.Menu import MainMenu, mdom
from GlobalActions import globalActionMap

class PowerKey:
	""" PowerKey stuff - handles the powerkey press and powerkey release actions"""

	def __init__(self, session):
		self.session = session
		globalActionMap.actions["conditional_power_down"] = self.conditional_powerdown
		globalActionMap.actions["conditional_power_up"] = self.conditional_powerup
		globalActionMap.actions["power_long"] = self.powerlong
		globalActionMap.actions["deepstandby"] = self.shutdown
		globalActionMap.actions["discrete_off"] = self.standby
		globalActionMap.actions["power_down"] = self.powerdown
		globalActionMap.actions["power_up"] = self.powerup
		self.standbyblocked = 1

	def MenuClosed(self, *val):
		self.session.infobar = None

	def shutdown(self):
		wasRecTimerWakeup = False
		recordings = self.session.nav.getRecordings()
		if not recordings:
			next_rec_time = self.session.nav.RecordTimer.getNextRecordingTime()
		if recordings or (next_rec_time > 0 and (next_rec_time - time()) < 360):
			if os.path.exists("/tmp/was_rectimer_wakeup") and not self.session.nav.RecordTimer.isRecTimerWakeup():
				f = open("/tmp/was_rectimer_wakeup", "r")
				wakeup = f.read()
				f.close()
				wasRecTimerWakeup = int(wakeup) and True or False
			if self.session.nav.RecordTimer.isRecTimerWakeup() or wasRecTimerWakeup or self.session.nav.RecordTimer.isRecording():
				print "PowerOff (timer wakeup) - Recording in progress or a timer about to activate, entering standby!"
				lastrecordEnd = 0
				for timer in self.session.nav.RecordTimer.timer_list:
					if lastrecordEnd == 0 or lastrecordEnd >= timer.begin:
						print "Set after-event for recording %s to DEEP-STANDBY." % timer.name
						timer.afterEvent = RecordTimer.AFTEREVENT.DEEPSTANDBY
						if timer.end > lastrecordEnd:
							lastrecordEnd = timer.end + 900

				if Screens.Standby.inStandby:
					msg = _(
						"Shutdown while recording in progress!\n"
						"Remaining in standby. When recording ends, the box will shut down."
					)
				else:
					msg = _(
						"Shutdown while recording in progress!\n"
						"Entering standby. When recording ends, the box will shut down."
					)

				from Screens.MessageBox import MessageBox

				self.session.openWithCallback(
					self.gotoStandby,
					MessageBox,
					msg,
					type=MessageBox.TYPE_INFO,
					timeout=10
				)
			else:
				print "PowerOff - Now!"
				self.session.open(Screens.Standby.TryQuitMainloop, Screens.Standby.QUIT_SHUTDOWN)
		elif not Screens.Standby.inTryQuitMainloop and self.session.current_dialog and self.session.current_dialog.ALLOW_SUSPEND:
			print "PowerOff - Now!"
			self.session.open(Screens.Standby.TryQuitMainloop, Screens.Standby.QUIT_SHUTDOWN)

	def powerlong(self):
		if Screens.Standby.inTryQuitMainloop or (self.session.current_dialog and not self.session.current_dialog.ALLOW_SUSPEND):
			return
		self.doAction(action=config.usage.on_long_powerpress.value)

	def doAction(self, action):
		self.standbyblocked = 1
		if action == "shutdown":
			self.shutdown()
		elif action == "show_menu":
			print "Show shutdown Menu"
			root = mdom.getroot()
			for x in root.findall("menu"):
				y = x.find("id")
				if y is not None:
					id = y.get("val")
					if id and id == "shutdown":
						self.session.infobar = self
						menu_screen = self.session.openWithCallback(self.MenuClosed, MainMenu, x)
						menu_screen.setTitle(_("Standby / restart"))
						return
		elif action == "standby":
			self.standby()

	def conditional_powerdown(self):
		if not config.usage.short_power_enable.value:
			return 0
		self.powerdown()

	def powerdown(self):
		self.standbyblocked = 0

	def conditional_powerup(self):
		if not config.usage.short_power_enable.value:
			return 0
		self.powerup()

	def powerup(self):
		if self.standbyblocked == 0:
			self.doAction(action=config.usage.on_short_powerpress.value)

	def gotoStandby(self, ret):
		self.standby()

	def standby(self):
		# if not Screens.Standby.inStandby and self.session.current_dialog and self.session.in_exec:
		if not Screens.Standby.inStandby and self.session.current_dialog and self.session.current_dialog.ALLOW_SUSPEND and self.session.in_exec:  # I am still not sure if it is good idea...
			self.session.open(Screens.Standby.Standby)

profile("Scart")
from Screens.Scart import Scart

class AutoScartControl:
	def __init__(self, session):
		self.force = False
		self.current_vcr_sb = enigma.eAVSwitch.getInstance().getVCRSlowBlanking()
		if self.current_vcr_sb and config.av.vcrswitch.value:
			self.scartDialog = session.instantiateDialog(Scart, True)
		else:
			self.scartDialog = session.instantiateDialog(Scart, False)
		config.av.vcrswitch.addNotifier(self.recheckVCRSb)
		enigma.eAVSwitch.getInstance().vcr_sb_notifier.get().append(self.VCRSbChanged)

	def recheckVCRSb(self, configelement):
		self.VCRSbChanged(self.current_vcr_sb)

	def VCRSbChanged(self, value):
		# print "vcr sb changed to", value
		self.current_vcr_sb = value
		if config.av.vcrswitch.value or value > 2:
			if value:
				self.scartDialog.showMessageBox()
			else:
				self.scartDialog.switchToTV()

profile("Load:CI")
from Screens.Ci import CiHandler

profile("Load:VolumeControl")
from Components.VolumeControl import VolumeControl
profile("Load:VideoResolutionKey")
from Screens.VideoResolution import VideoResolutionKey

from time import time, localtime, strftime
from Tools.StbHardware import setFPWakeuptime, setRTCtime

def runScreenTest():
	config.misc.startCounter.value += 1
	config.misc.startCounter.save()

	profile("readPluginList")
	plugins.readPluginList(resolveFilename(SCOPE_PLUGINS))

	profile("Init:Session")
	nav = Navigation(config.misc.isNextRecordTimerAfterEventActionAuto.value, config.misc.isNextPowerTimerAfterEventActionAuto.value)
	session = Session(desktop=enigma.getDesktop(0), summary_desktop=enigma.getDesktop(1), navigation=nav)

	CiHandler.setSession(session)

	screensToRun = [p.__call__ for p in plugins.getPlugins(PluginDescriptor.WHERE_WIZARD)]

	profile("wizards")
	screensToRun += wizardManager.getWizards()
	screensToRun.append((100, InfoBar.InfoBar))
	screensToRun.sort()

	enigma.ePythonConfigQuery.setQueryFunc(configfile.getResolvedKey)

	def runNextScreen(session, screensToRun, *result):
		if result:
			enigma.quitMainloop(*result)
			return

		screen = screensToRun[0][1]
		args = screensToRun[0][2:]
		if screensToRun:
			session.openWithCallback(boundFunction(runNextScreen, session, screensToRun[1:]), screen, *args)
		else:  # FIXME: This is patently wrong. Getting screen/args would have caused an exception, if screensToRun was false
			session.open(screen, *args)  # FIXME: Both lines can probably be deleted.

	runNextScreen(session, screensToRun)

	profile("Init:VolumeControl")
	vol = VolumeControl(session)
	profile("Init:PowerKey")
	global Screens
	Screens.Standby.powerKey = power = PowerKey(session)
	profile("Init:VideoResolutionKey")
	resolution = VideoResolutionKey(session)

	if getBoxType() in ('mixosf5', 'mixosf7', 'mixoslumi', 'gi9196m', 'maram9', 'ixussone', 'ixussone') or getMachineBuild() in ('inihde', 'inihdx'):
		profile("VFDSYMBOLS")
		import Components.VfdSymbols
		Components.VfdSymbols.SymbolsCheck(session)

	# we need session.scart to access it from within menu.xml
	session.scart = AutoScartControl(session)

	profile("Init:Trashcan")
	import Tools.Trashcan
	Tools.Trashcan.init(session)

	profile("Init:AutoVideoMode")
	import Screens.VideoMode
	Screens.VideoMode.autostart(session)

	profile("RunReactor")
	profile_final()
	runReactor()

	profile("wakeup")

	# get currentTime
	nowTime = time()
	if not config.misc.SyncTimeUsing.getValue() == "0" or getBoxType().startswith('gb') or getMachineProcModel().startswith('ini'):
		print "dvb time sync disabled... so set RTC now to current linux time!", strftime("%a %d %b %Y %H:%M", localtime(nowTime))
		setRTCtime(nowTime)

	wakeupList = [
		x for x in (
			(session.nav.RecordTimer.getNextRecordingTime(), 0, session.nav.RecordTimer.isNextRecordAfterEventActionAuto()),
			(session.nav.RecordTimer.getNextZapTime(), 1),
			(plugins.getNextWakeupTime(), 2),
			(session.nav.PowerTimer.getNextPowerManagerTime(), 3, session.nav.PowerTimer.isNextPowerManagerAfterEventActionAuto())
		)
		if x[0] != -1
	]
	wakeupList.sort()
	recordTimerWakeupAuto = False
	if wakeupList and wakeupList[0][1] != 3:
		startTime = wakeupList[0]
		if (startTime[0] - nowTime) < 270:  # no time to switch box back on
			wptime = nowTime + 30  # so switch back on in 30 seconds
		else:
			if getBoxType().startswith("gb"):
				wptime = startTime[0] - 120  # Gigaboxes already start 2 min. before wakeup time
			else:
				wptime = startTime[0] - 240

		# if not config.misc.SyncTimeUsing.value == "0" or getBrandOEM() == 'gigablue':
		# 	print "dvb time sync disabled... so set RTC now to current linux time!", strftime("%a %d %b %Y %H:%M", localtime(nowTime))
		# 	setRTCtime(nowTime)
		print "set wakeup time to", strftime("%a %d %b %Y %H:%M", localtime(wptime))
		setFPWakeuptime(wptime)
		recordTimerWakeupAuto = startTime[1] == 0 and startTime[2]
		print 'recordTimerWakeupAuto', recordTimerWakeupAuto
	config.misc.isNextRecordTimerAfterEventActionAuto.value = recordTimerWakeupAuto
	config.misc.isNextRecordTimerAfterEventActionAuto.save()

	PowerTimerWakeupAuto = False
	if wakeupList and wakeupList[0][1] == 3:
		startTime = wakeupList[0]
		if (startTime[0] - nowTime) < 60:  # no time to switch box back on
			wptime = nowTime + 30  # so switch back on in 30 seconds
		else:
			if getBoxType().startswith("gb"):
				wptime = startTime[0] + 120  # Gigaboxes already start 2 min. before wakeup time
			else:
				wptime = startTime[0]

		# if not config.misc.SyncTimeUsing.value == "0" or getBrandOEM() == 'gigablue':
		# 	print "dvb time sync disabled... so set RTC now to current linux time!", strftime("%a %d %b %Y %H:%M", localtime(nowTime))
		# 	setRTCtime(nowTime)
		print "set wakeup time to", strftime("%a %d %b %Y %H:%M", localtime(wptime + 60))
		setFPWakeuptime(wptime)
		PowerTimerWakeupAuto = startTime[1] == 3 and startTime[2]
		print 'PowerTimerWakeupAuto', PowerTimerWakeupAuto
	config.misc.isNextPowerTimerAfterEventActionAuto.value = PowerTimerWakeupAuto
	config.misc.isNextPowerTimerAfterEventActionAuto.save()

	profile("stopService")
	session.nav.stopService()
	profile("nav shutdown")
	session.nav.shutdown()

	profile("configfile.save")
	configfile.save()
	from Screens import InfoBarGenerics
	InfoBarGenerics.saveResumePoints()

	return 0

profile("Init:skin")
import skin
skin.loadSkinData(enigma.getDesktop(0))

profile("InputDevice")
import Components.InputDevice
Components.InputDevice.InitInputDevices()
import Components.InputHotplug

profile("TimeZones")
import Components.Timezones
Components.Timezones.InitTimeZones()

profile("SetupDevices")
import Components.SetupDevices
Components.SetupDevices.InitSetupDevices()

profile("UserInterface")
import Screens.UserInterfacePositioner
Screens.UserInterfacePositioner.InitOsd()

profile("AVSwitch")
import Components.AVSwitch
Components.AVSwitch.InitAVSwitch()
Components.AVSwitch.InitiVideomodeHotplug()

profile("HdmiRecord")
import Components.HdmiRecord
Components.HdmiRecord.InitHdmiRecord()

profile("RecordingConfig")
import Components.RecordingConfig
Components.RecordingConfig.InitRecordingConfig()

profile("UsageConfig")
import Components.UsageConfig
Components.UsageConfig.InitUsageConfig()

# Clean up after IceTV plugin has been removed. This is needed to restore normal FTA EPG.
if not os.path.exists(resolveFilename(SCOPE_PLUGINS, "SystemPlugins/IceTV")):
	config.plugins.icetv = ConfigSubsection()
	config.plugins.icetv.enable_epg = ConfigYesNo(default=False)
	if config.plugins.icetv.enable_epg.value:
		config.usage.show_eit_nownext.value = True
		config.usage.show_eit_nownext.save()
		config.epg.eit.value = True
		config.epg.save()
		config.plugins.icetv = ConfigSubsection()
		config.plugins.icetv.enable_epg = ConfigYesNo(default=False)
		config.plugins.icetv.enable_epg.value = False
		config.plugins.icetv.save()
		configfile.save()

# profile("Init:DebugLogCheck")
# import Screens.LogManager
# Screens.LogManager.AutoLogManager()

profile("Init:OnlineCheckState")
import Components.OnlineUpdateCheck
Components.OnlineUpdateCheck.OnlineUpdateCheck()

profile("Init:NTPSync")
import Components.NetworkTime
Components.NetworkTime.AutoNTPSync()

profile("keymapparser")
import keymapparser
keymapparser.readKeymap(config.usage.keymap.value)

profile("Network")
import Components.Network
Components.Network.InitNetwork()

profile("LCD")
import Components.Lcd
Components.Lcd.InitLcd()
Components.Lcd.IconCheck()

profile("UserInterfacePos")
import Screens.UserInterfacePositioner
Screens.UserInterfacePositioner.InitOsdPosition()

profile("EpgCacheSched")
import Components.EpgLoadSave
Components.EpgLoadSave.EpgCacheSaveCheck()
Components.EpgLoadSave.EpgCacheLoadCheck()

profile("RFMod")
import Components.RFmod
Components.RFmod.InitRFmod()

profile("Init:CI")
import Screens.Ci
Screens.Ci.InitCiConfig()

profile("RcModel")
import Components.RcModel

if config.clientmode.enabled.value:
	import Components.ChannelsImporter
	Components.ChannelsImporter.autostart()

# from enigma import dump_malloc_stats
# t = eTimer()
# t.callback.append(dump_malloc_stats)
# t.start(1000)

# first, setup a screen
try:
	runScreenTest()

	plugins.shutdown()

	Components.ParentalControl.parentalControl.save()
except:
	print 'EXCEPTION IN PYTHON STARTUP CODE:'
	print '-' * 60
	print_exc(file=stdout)
	enigma.quitMainloop(5)
	print '-' * 60