Skip to content

rubyvanrooyen/meerkat-backend-interface

 
 

Repository files navigation

meerkat-backend-interface

For the latest comprehensive documentation --> ericjmichaud.com/meerkat-backend-interface


This repository is for the KATCP Server and Katportal Client modules of the below diagram. Together, these modules extract all observational metadata to enable Breakthrough Listen's commensal observing program at the MeerKAT telescope. These data include:

  • URLs of SPEAD packet streams containing raw voltage data, to be subscribed to by our Beam Former.
  • current target information
  • schedule block information
  • antenna weights
  • etc...

Diagram of Breakthrough Listen To-Be-Built Software Stack at MeerKAT

        +----------+
        |          |
        |  KATCP   | Requests containing metadata
        |  Server  | <------------------------+
        |          |                          |
        +--+-------+                          |               ,-.
           |                                  |              / \  `.  __..-,O
           |                                  |             :   \ --''_..-'.'
           v                                  |             |    . .-' `. '.
                                              |             :     .     .`.'
        +----------+                     +----+-----+        \     `.  /  ..
        |          |                     |          |         \      `.   ' .
        |  Redis   |                     |          | +------> `,       `.   \
+-------+  Server  |                     |   CAM    |          ,|,`.       `-.\
|       |          |                     |          |        '.||  ``-...__..-`
|       +------+---+                     |          | <-----+  |  |
|              |                         +----+--+--+          |__|
|          ^   |                              ^  |             /||\
|          |   v                              |  |            //||\\
|          |                                  |  |           // || \\
|       +--+--------+                         |  |       ___//__||__\\___
|       |           | Requests for metadata   |  |       '--------------'
|       | Katportal +-------------------------+  |               |
|       | Client    |           metadata         |               |
|       |           | <--------------------------+               |
|       +-----------+                                            |
|                                                                |
|                                                                |
+------------+-------------------------+                         |
             |                         |                         |
             |                         |                         |
             v                         v                         |
        +----+------+             +----+------+                  |
        | Real-time |             | Target    |                  |
        | Signal    |             | Selection |   raw voltage    |
        | Detection | <-----------+ &         | <----------------+
        | and Data  |             | Beam      |      stream
        | Storage   |             | Forming   |
        +-----------+             +-----------+


 To be added:
 +-------------+
 | Stream      |
 | Distributor |
 +-------------+

Description of modules in above diagram:

Telescope ASCII Art:

Represents the actual antennas at the telescope. There are 64 of them.

CAM

The Control And Monitoring computers for the telescope. These are not maintained by us, but are what we interface with to acquire metadata.

KATCP Server

The KATCP Server receives requests from CAM. These requests include:

  • ?configure
  • ?capture-init
  • ?capture-start
  • ?capture-stop
  • ?capture-done
  • ?deconfigure
  • ?halt
  • ?help
  • ?log-level
  • ?restart [#restartf1]_
  • ?client-list
  • ?sensor-list
  • ?sensor-sampling
  • ?sensor-value
  • ?watchdog
  • ?version-list (only standard in KATCP v5 or later)
  • ?request-timeout-hint (pre-standard only if protocol flags indicates timeout hints, supported for KATCP v5.1 or later)
  • ?sensor-sampling-clear (non-standard)

The ?configure ?capture-init ?capture-start ?capture-stop ?capture-done ?deconfigure and ?halt requests have custom implementations in src/katcp_server.py's BLBackendInterface class. The rest are inherited from its superclass. Together, these requests (particularly ?configure) contain important metadata, such as the URLs for the raw voltage data coming off the telescope, and their timing is important too. For instance, we'll know when an observation has started when we receive the ?capture-start request. For more information, see the ICD and the Swim Lane Diagram

Redis Server

A redis database is a key-value store that is great for sharing information between modules in a system like this. It runs as a server on the local network that can be modified and accessed via requests. It has a command-line client, but the redis-py python module is how we interface with it within our python code.

Katportal Client

The Katportal Client sends requests for additional metadata to CAM.

Target Selection & Beam Forming

System that selects targets from and forms pencil-beams to observe them. NOT YET BUILT, however our target list has been compiled by Logan Pierce ⭐

Real-time Signal Detection and Data Storage

Our signal detection and data storage systems.

Installation Instructions

There may be other ways of doing it, but this way works for me as of 2019-03-31. First, make sure to install redis. If it's installed, you should be able to start it by executing from the terminal:

redis-server

Next, download the repository like so:

git clone --recurse-submodules https://github.com/ejmichaud/meerkat-backend-interface

It's important to include the --recurse-submodules because certain components rely on what's in the ./reynard/ submodule that is installed with this.

Now, install the following Python packages in precisely the order listed. Of course, I'd recommend installing everything in a Python 2 virtual environment (create one with virtualenv -p <python2 binary> venv and then activate with . venv/bin/activate)

First, make sure you cd meerkat-backend-interface, then:

  1. pip install katversion
  2. pip install -r requirements.txt

You should hopefully then be able to run all the modules.

Usage

After starting redis on port 6379, simply start both modules like so:

(venv)$ python katcp_start.py

Which will run the server locally on port 5000, and:

(venv)$ python katportal_start.py

Which will start the katportal querying system.

Both of these processes need to be running to properly acquire all observational metadata.

Redis Formatting:

For redis key formatting and respective value descriptions, see REDIS_DOCUMENTATION

Next Steps:

There are a range of additions and modifications that you will have to make before deploying. The reason why many of these have been left out is that as of 2018-08-06, I simply don't have enough information about the needs of Breakthrough Listen to build them. Here's what you should keep in mind:

Big Things:

  • The Katportal Client module is currently designed to query for specific sensors only once in response to the KATCP Server receiving a request. For instance, when we receive a ?capture-start request, src/katcp_server.py publishes a capture-start:[product_id] message to the alerts redis channel. This message is then received by src/katportal_server.py and a set of sensor values are retrieved through the Katportal. My concerns about this method are that sensor values may change in ways that we care about after we send this request. A possibly safer method, which is the only method mentioned in the Swim Lane Diagram, is to use a websocket subscription to get sensor data. Websocket subscriptions are implemented, to a limited degree, in the scripts/subscribe.py script, but we may want to build subscriptions in to the src/katportal_server.py's BLKATPortalClient by default.
  • Even if you don't care about subscriptions, you'll still need to make additions to the src/katportal_server.py file to specify which sensors to query in response to which events. For instance, to get data from all sensors containing target in their name, add the string "target" to the sensors_to_query list in the _capture_init method. These strings can also be regular expressions, as mentioned in the Katportal Docs.
  • Currently, sensor values are stored in redis associated with the product_id of the subarray which they were queried from (see REDIS_DOCUMENTATION). Since product ids are temporary, this could lead to a massive build-up of outdated sensor values in the redis server, since a new key is created for each product_id * for each sensor. This could add up quickly! Consider setting an expiration on the keys created within src/katportal_server.py, by passing an expiration (in seconds) named argument to write_pair_redis.

Smaller Things:

  • Currently, katportal_start.py does not shut down in a thread-safe way. katcp_start.py manages to do this, but it uses a complex mechanism that I don't understand. Consider supporting thread-safe shutdown of src/katportal_server.py's io_loop in the future.
  • While currently commented out, there is a mechanism that sends a slack message when either of the modules shuts down. For testing purposes, this has been commented out. When you deploy, you should uncomment it, and possibly modify its behavior. As you can see in the src/slack_tools.py file, using this requires you to store a Unix variable called $SLACK_TOKEN in your local environment.

Tasks are marked in the code with a TODO keyword. Search for them like this:

$ grep -r -n TODO .

./scripts/subscribe.py:56:    # TODO: Add sensors to subscribe to on ?configure request
./katportal_start.py:11:    # TODO: uncomment when you deploy
./src/katcp_server.py:349:            default=True, # TODO: implement actual NTP synchronization request
./src/katcp_server.py:372:        TODO:
./src/katcp_server.py:388:        # TODO: uncomment when you deploy
./src/katportal_server.py:36:    TODO:
./src/katportal_server.py:87:        sensors_to_query = [] # TODO: add sensors to query on ?configure
./src/katportal_server.py:106:        sensors_to_query = [] # TODO:  add sensors to query on ?capture_init
./src/katportal_server.py:122:        # TODO: get more information?
./src/katportal_server.py:142:        # TODO: get more information?
./src/katportal_server.py:153:        sensors_to_query = [] # TODO: add sensors to query on ?capture_done
./src/katportal_server.py:169:        sensors_to_query = [] # TODO: add sensors to query on ?deconfigure
./src/katportal_server.py:211:        # TODO: do something interesting with schedule blocks
./src/katportal_server.py:245:            # TODO: get more information using the client?

Questions:

  1. In [1], Siemion et al. say that the "SETI Search Subsystem" will detect candidate signals in real time. What needs to happen from a software perspective for this to happen? Will those processes be started and monitored from my system, or from something lower in the stack?
  2. A significant task seems to be the design of the software-based beamforming/interferometry systems. In [1], Siemion et al. say that our system will start with a single beam and then upgrade from there. Do we still plan on scaling this way? If so, do we intend on writing the software now that will support the multi-beam observing when it comes online? Will the system that we are building now be sufficiently general to handle all sub-array sizes and beam configurations going forward?
  3. In [1], Siemion et al. write that "A small amount of observing time or follow up observations, 5-10 hours per month, would significantly improve the speed and productivity of the commensal program." What kind of human interface do we need to build in order to accomodate these observations? Will these targets be selected manually (in contrast to the automated "scheduling" system that will do most of our commensal observing)?
  4. Will this same software be used on the SKA? (approx. 2022?)

References

  1. SETI on MeerKAT Project Proposal, Siemion et al.
  2. katcp-python GitHub repository
  3. katportalclient GitHub repository
  4. MeerKAT ICD
  5. TRAPUM-CAM Interface
  6. Swim Lane Diagram
  7. Katportal Docs.
  8. REDIS_DOCUMENTATION

About

Breakthrough Listen's interface to MeerKAT 🔭 👽

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages

  • Python 100.0%