• Geekbench 5: 1052 SingleCore, 3935 MultiCore
• Battery: 57wh with 87% health and 60% brightness (2 NVME and 1 SSD SATA), I got 3h20 screen time when suffering web and light code

• Intel wifi card is developing, there are two version of kext:
  • Faked as an ethernet card: you can check here
  • Using like an wifi card: you can check the status here
  • Bluetooth kext can be found here: IntelBluetoothFirmware
• Thing may never work:
  • Discrete GPU (Disabled)
  • Fingerprint (Disabled)
  • Internal Microphone
• Some streaming video like http://mixer.com/ in safari will make iGPU alway highest freq until sleep or reboot the machine
  • This due to loading Apple GuC firmware into UHD630 for better performance
  • You can turn it back to normal by remove igfxfw=2 in boot-flags

This will happen when using plug-in HDMI after bootup. This will be fixed after short sleep (about 1min) and never happen again until reboot

• You can fixed this by turn off com.apple.driver.AppleHDAController in Kernel and Kext Patches on Clover or Kernel > Patch on Opencore but HDMI Audio will be disabled

This will pull all newest kext and build into zip files

• Clone this repo
• Run follow command: python3 update.py --build
• Get your build at Builds folder

• Prepair an Mac installer in USB with bootloader you choice ( Use unibeast to create it )
• Go to release and download lastest version of your choice ( Clover or Opencore )
• Replace EFI folder in USB EFI partition with this shipped EFI folder ( find the folder with name is EFI from zip file)
• Boot into USB and select MacOs installer
• After install success, run PostInstall/install.sh in terminal
• Then you need to mount EFI partition and replace it with USB's EFI
• After System EFI replaced by your EFI, Using Opencore Configurator, Clover Configurator or update script to change SMBIOS, generate your serial and MBL
• If you're using intel card, please use NullEthernet for fixing iMess and FaceTime
  • Change MAC in NullEthernet with your new created one, see below

• Generate your MAC address in SSDT-RMNE if using NullEthernet
• You can make an MacAddress in Mac generator online
• Edit SSDT-RMNE.aml with MaciASL and replace MAC with your generated one
• Save as -> ACPI machine language (replace exited one)
• Add it to your bootloader:
  • Kext add in Kexts:
    • Copy kext to kexts/other if using Clover
    • Copy kext to Kexts and add it into Kernel in config.plist (Use OpencoreConfigurator)
  • AML's file add to ACPI folder (Opencore need add to ACPI after copy SSDT file to ACPI, use OpencoreConfigurator)
• Reboot

sudo pmset -a hibernatemode 0
sudo pmset -a autopoweroff 0
sudo pmset -a standby 0
sudo pmset -a proximitywake 0
sudo pmset -b tcpkeepalive 0 (optional)

-b - Battery -c - AC Power -a - Both

Please uncheck all options (except Prevent computer from sleeping..., which is optional) in the Energy Saver panel.

If you are using FHD(1080p) display, you may want to enable font smoothing, run this command from terminal:

defaults write -g CGFontRenderingFontSmoothingDisabled -bool NO

If your laptop display is 4K screen, you should set uiscale to 2:

• Opencore: NVRAM -> Add -> 4D1EDE05-38C7-4A6A-9CC6-4BCCA8B38C14 -> UIScale -> 2
• Clover: BootGraphics -> UIScale -> 2

You have to do following changes to Device Properties or it cant boot into macos:

Change

<key>#PciRoot(0x0)/Pci(0x1c,0x0)/Pci(0x0,0x0)</key>

Into

<key>PciRoot(0x0)/Pci(0x1c,0x0)/Pci(0x0,0x0)</key>

• See THE Solution:Dell DW1820A
• Other card you may need google for it

Add UUID=xxx none ntfs rw,auto,nobrowse to /etc/fstab, xxx is the UUID of your NTFS partition.

If your NTFS partition has Windows installed, you need to run powercfg -h off in powershell in Windows to disable hibernation.

• Turn off Smart zoom to avoid two-finger tap delay.

See is-it-possible-to-get-rid-of-the-delay-between-right-clicking-and-seeing-the-context-menu

Big thanks for @Leoing, who found all nessesary value

You can follow this to change those value

For Bios 1.6.0 0x78C need set to 0x0 so VoltageShift can be used

You can use mine SmartCPU Script base on VoltageShift for controlling cpu power's usage: SmartCPU

• acidanthera for providing almost all kexts and drivers
• alexandred for providing VoodooI2C
• headkaze for providing the very useful Hackintool
• daliansky for providing the awesome hotpatch guide OC-little and the always up-to-date hackintosh solutions XiaoMi-Pro-Hackintosh 黑果小兵的部落阁
• RehabMan for providing numbers of hotpatches and hotpatch guides
• knnspeed for providing Combojack, well-explained hot patches and USB-C hotplug solution
• bavariancake and LuletterSoul for providing detailed installation guide and configuration for XPS15-9570
• And all other authors that mentioned or not mentioned in this repo
• xxxza this build is porter from his project, big thanks to him