def OnLeftDblClick(self, event):
""" Event handler to open child form"""
ctrl = event.GetEventObject()
type = ''
if ctrl.Id == cdml.IDF_BUTTON3: # Population Set
cc = self.cc_pset
id_obj = cc.GetValue()
form = 'PopulationSets'
elif ctrl.Id == cdml.IDF_BUTTON4 : # Primary Model
cc = self.cc_model
id_obj = cc.GetValue()
form = 'StudyModels'
elif ctrl.Id == cdml.IDP_BUTTON4:
# The notes rule text
cc = ctrl
TheTextControl = cc
id_obj = cc.GetValue()
DefaultText = id_obj
form = ''
else:
cc = ctrl.GetParent()
TheTextControl = cc.GetTextCtrl()
if cc.Id == cdml.IDF_BUTTON1:
id_obj = cc.GetValue()
form = 'PopulationSets'
elif cc.Id == cdml.IDF_BUTTON2:
id_obj = cc.GetValue()
form = 'StudyModels'
else:
id_obj = str(cc.GetValueString())
DefaultText = id_obj
if cc.Id == cdml.IDP_BUTTON1:
form = 'Parameters'
type = ['System Option']*(self.curPage==0) + ['Number','Integer','State Indicator']
elif cc.Id == cdml.IDP_BUTTON2:
form = ''
type = 'Expression'
elif cc.Id == cdml.IDP_BUTTON3:
form = ''
type = 'Expression'
if ('CostWizard' in DefaultText):
form = 'WIZARD'
self.curCtrl = cc
if form == 'WIZARD':
try:
Sequence = DB.CostWizardParserForGUI(DefaultText, True)
dlg_wizard = Wizard.WizardDialog(data=Sequence, parent=self)
dlg_wizard.CenterOnScreen()
dlg_wizard.Show()
dlg_wizard.MyMakeModal()
except:
cdml.dlgErrorMsg(Parent = self)
elif form == '':
TheText = cdml.dlgTextEntry(Message = 'Modify Text and Press OK, or Press Cancel to ignore changes', Caption = type, DefaultValue = DefaultText, Parent = self)
TheTextControl.SetValue(str(TheText))
# make sure focus returne properly to this form
self.MyMakeModal()
self.Raise()
else:
if id_obj == 0 or id_obj == '' : id_obj = -1
cdml.OpenForm(form, self, cdml.ID_MODE_SINGL, id_obj, type, self.idPrj)
def SpecialRecordAdd(self, ClickedPanel):
""" Add a special record - In this case this means a new population set
Generated from a distribution population set """
if ClickedPanel != None:
RecordID = ClickedPanel.Key
if (RecordID == 0 or RecordID == None) or not DB.PopulationSets.has_key(RecordID):
ReturnRecord = None
else:
if not DB.PopulationSets[RecordID].IsDistributionBased():
# This is a data population set
cdml.dlgSimpleMsg(
"ERROR",
"This population set is not based on distribution and therefore cannot be used to generate new population data",
Parent=self,
)
ReturnRecord = None
else:
# This means this population set is defined by distributions
dlg = wx.NumberEntryDialog(
self,
"Define population size",
"Please enter the size of the population to generate ",
"Population Size",
1000,
0,
100000,
)
dlg.CenterOnScreen()
if dlg.ShowModal() != wx.ID_OK:
# If 'Cancel' button is clicked
ReturnRecord = None
else:
NumberOfIndividuals = dlg.GetValue() # Get selection index
dlg.Destroy()
PopulationTraceBack = None
# When in admin mode, also ask for traceback info
AskForTraceBack = cdml.GetAdminMode()
if AskForTraceBack:
TraceBackText = cdml.dlgTextEntry(
Message="Please enter the Pickled TraceBack information as appear in the hidden report of the population you are trying to reconstruct ",
Caption="Enter Pickled TraceBack Info",
DefaultValue="",
Parent=self,
)
if TraceBackText == "":
PopulationTraceBack = None
else:
try:
PopulationTraceBack = DB.pickle.loads(TraceBackText)
except:
raise ValueError, "TraceBack Error: Could not properly extract TraceBack - please make sure a proper TraceBack was entered"
PopulationTraceBack = None
TheProgressDialog = None
try:
# version 2.5 does not support canceling simulation
TheProgressDialog = cdml.ProgressDialogTimeElapsed(
Parent=self, StartTimerUponCreation=False, AllowCancel=DB.SystemSupportsProcesses
)
# Define the Function to run on a thread/process
def GenerationStartMiniScript():
"Compile and execute the generation"
Pop = DB.PopulationSets[RecordID]
# Compile the generation script with default options
ScriptFileNameFullPath = Pop.CompilePopulationGeneration(
GeneratedPopulationSize=NumberOfIndividuals,
GenerationFileNamePrefix=None,
OutputFileNamePrefix=None,
RandomStateFileNamePrefix=None,
GenerationOptions=None,
RecreateFromTraceBack=PopulationTraceBack,
)
# run the generation script
DeleteScriptFileAfterRun = not cdml.GetAdminMode()
(ProcessList, PipeList) = Pop.RunPopulationGeneration(
GenerationFileName=ScriptFileNameFullPath,
NumberOfProcessesToRun=-1,
DeleteScriptFileAfterRun=DeleteScriptFileAfterRun,
)
return (ProcessList, PipeList)
def GenerationEndMiniScript(ProcessList, PipeList):
"Complete Generation by collecting results"
Pop = DB.PopulationSets[RecordID]
# Collect the results
RetVal = Pop.CollectResults(ProcessList, PipeList)
return RetVal
ThreadObject = cdml.WorkerThread(GenerationStartMiniScript, GenerationEndMiniScript)
# Tell the dialog box what to do when cancel is pressed
TheProgressDialog.FunctionToRunUponCancel = ThreadObject.StopProcess
# Now start the timer for the progress dialog box
TheProgressDialog.StartTimer()
# wait until thread/process exits
Info = ThreadObject.WaitForJob()
# Cancel through the dialog box is no longer possible
TheProgressDialog.FunctionToRunUponCancel = None
# Properly destroy the dialog
WasCanceled = TheProgressDialog.WasCanceled
TheProgressDialog.Destroy()
TheProgressDialog = None
if WasCanceled:
cdml.dlgSimpleMsg(
"INFO",
"The Population generation was canceled by request!",
wx.OK,
wx.ICON_INFORMATION,
Parent=self,
)
ReturnRecord = None
else:
cdml.dlgSimpleMsg(
"INFO",
"The Population generation has finished successfully! After you press OK your cursor will be focused on the new population set.",
wx.OK,
wx.ICON_INFORMATION,
Parent=self,
)
ReturnRecord = Info
except:
cdml.dlgErrorMsg()
ReturnRecord = None
# Properly destroy the progress dialog box if not done before
if TheProgressDialog != None:
TheProgressDialog.Destroy()
return ReturnRecord
def SpecialRecordAdd(self, ClickedPanel):
""" Add a special record - In this case this means a new population set
Generated from a distribution population set """
if ClickedPanel != None:
RecordID = ClickedPanel.Key
if (RecordID == 0 or RecordID
== None) or not DB.PopulationSets.has_key(RecordID):
ReturnRecord = None
else:
if not DB.PopulationSets[RecordID].IsDistributionBased():
# This is a data population set
cdml.dlgSimpleMsg(
'ERROR',
'This population set is not based on distribution and therefore cannot be used to generate new population data',
Parent=self)
ReturnRecord = None
else:
# This means this population set is defined by distributions
dlg = wx.NumberEntryDialog(
self, 'Define population size',
'Please enter the size of the population to generate ',
'Population Size', 1000, 0, 100000)
dlg.CenterOnScreen()
if dlg.ShowModal() != wx.ID_OK:
# If 'Cancel' button is clicked
ReturnRecord = None
else:
NumberOfIndividuals = dlg.GetValue(
) # Get selection index
dlg.Destroy()
PopulationTraceBack = None
# When in admin mode, also ask for traceback info
AskForTraceBack = cdml.GetAdminMode()
if AskForTraceBack:
TraceBackText = cdml.dlgTextEntry(
Message=
'Please enter the Pickled TraceBack information as appear in the hidden report of the population you are trying to reconstruct ',
Caption='Enter Pickled TraceBack Info',
DefaultValue='',
Parent=self)
if TraceBackText == '':
PopulationTraceBack = None
else:
try:
PopulationTraceBack = DB.pickle.loads(
TraceBackText)
except:
raise ValueError, 'TraceBack Error: Could not properly extract TraceBack - please make sure a proper TraceBack was entered'
PopulationTraceBack = None
TheProgressDialog = None
try:
# version 2.5 does not support canceling simulation
TheProgressDialog = cdml.ProgressDialogTimeElapsed(
Parent=self,
StartTimerUponCreation=False,
AllowCancel=DB.SystemSupportsProcesses)
# Define the Function to run on a thread/process
def GenerationStartMiniScript():
"Compile and execute the generation"
Pop = DB.PopulationSets[RecordID]
# Compile the generation script with default options
ScriptFileNameFullPath = Pop.CompilePopulationGeneration(
GeneratedPopulationSize=NumberOfIndividuals,
GenerationFileNamePrefix=None,
OutputFileNamePrefix=None,
RandomStateFileNamePrefix=None,
GenerationOptions=None,
RecreateFromTraceBack=PopulationTraceBack)
# run the generation script
DeleteScriptFileAfterRun = not cdml.GetAdminMode(
)
(ProcessList,
PipeList) = Pop.RunPopulationGeneration(
GenerationFileName=ScriptFileNameFullPath,
NumberOfProcessesToRun=-1,
DeleteScriptFileAfterRun=
DeleteScriptFileAfterRun)
return (ProcessList, PipeList)
def GenerationEndMiniScript(ProcessList, PipeList):
"Complete Generation by collecting results"
Pop = DB.PopulationSets[RecordID]
# Collect the results
RetVal = Pop.CollectResults(
ProcessList, PipeList)
return RetVal
ThreadObject = cdml.WorkerThread(
GenerationStartMiniScript,
GenerationEndMiniScript)
# Tell the dialog box what to do when cancel is pressed
TheProgressDialog.FunctionToRunUponCancel = ThreadObject.StopProcess
# Now start the timer for the progress dialog box
TheProgressDialog.StartTimer()
# wait until thread/process exits
Info = ThreadObject.WaitForJob()
# Cancel through the dialog box is no longer possible
TheProgressDialog.FunctionToRunUponCancel = None
# Properly destroy the dialog
WasCanceled = TheProgressDialog.WasCanceled
TheProgressDialog.Destroy()
TheProgressDialog = None
if WasCanceled:
cdml.dlgSimpleMsg(
'INFO',
'The Population generation was canceled by request!',
wx.OK,
wx.ICON_INFORMATION,
Parent=self)
ReturnRecord = None
else:
cdml.dlgSimpleMsg(
'INFO',
'The Population generation has finished successfully! After you press OK your cursor will be focused on the new population set.',
wx.OK,
wx.ICON_INFORMATION,
Parent=self)
ReturnRecord = Info
except:
cdml.dlgErrorMsg()
ReturnRecord = None
# Properly destroy the progress dialog box if not done before
if TheProgressDialog != None:
TheProgressDialog.Destroy()
return ReturnRecord
