def test_c_NonExistant(self):
script = c.pcr_createScriptFromXMLFile("nonExistant")
self.failUnless(script != None)
self.failUnless(not c.pcr_ScriptError(script))
# error cause non existant
c.pcr_ScriptExecute(script)
self.failUnless(c.pcr_ScriptError(script))
error = c.pcr_ScriptErrorMessage(script)
self.failUnless(error.find("unable to open primary document entity") >= 0 )
def test_c_NonExistant(self):
script = c.pcr_createScriptFromXMLFile("nonExistant")
self.failUnless(script != None)
self.failUnless(not c.pcr_ScriptError(script))
# error cause non existant
c.pcr_ScriptExecute(script)
self.failUnless(c.pcr_ScriptError(script))
error = c.pcr_ScriptErrorMessage(script)
self.failUnless(
error.find("unable to open primary document entity") >= 0)
import sys
# simple application using
# the low level C functions of PCRasterModelEngine
from PCRasterLinkOut import c
print "PCRaster link out test driver"
if len(sys.argv) != 2:
print "USAGE: LinkOutTestDriver inputModelFile.xml"
sys.exit(1)
# argv[1] is an xml file
script = c.pcr_createScriptFromXMLFile(sys.argv[1])
if script == None:
raise Exception, sys.argv[1]+":PANIC allocation of a few bytes failed"
try:
# typical error: sys.argv[1] is not existant
if c.pcr_ScriptError(script):
raise Exception, sys.argv[1]+":"+c.pcr_ScriptErrorMessage(script)
c.pcr_ScriptExecute(script)
# typical errors:
# xml is malformed
# some inputs are not found
# resource error: memory/disk full
if c.pcr_ScriptError(script):
raise Exception, sys.argv[1]+":"+c.pcr_ScriptErrorMessage(script)
finally:
def testDynamicModel(self):
nrCells = 2 * 2
scalarNonSpatialBufferType = ctypes.c_float * 1
scalarSpatialBufferType = ctypes.c_float * nrCells
script = c.pcr_createScriptFromXMLFile("dynamicModel.xml")
self.failUnless(script != None)
self.failUnless(not c.pcr_ScriptError(script))
# initialize data array with all 0 ptrs
dataTransferArraySize = 6
dataTransferArrayType = ctypes.c_void_p * dataTransferArraySize
data = dataTransferArrayType()
# create buffer 0: initialInput: a NonSpatial with value 2.5
initialInputBuffer = scalarNonSpatialBufferType( 2.5 )
# register buffer in data
data[0] = ctypes.cast(initialInputBuffer,ctypes.c_void_p)
# create buffer 4: memOutputInitial
memOutputInitialBuffer = scalarNonSpatialBufferType(-1)
self.failUnlessEqual(memOutputInitialBuffer[0], -1)
data[4] = ctypes.cast(memOutputInitialBuffer,ctypes.c_void_p)
# call initial, data has values for data used in initial
# other entries are 0
c.pcr_ScriptExecuteInitialStepMemory(script, data)
self.failUnless(not c.pcr_ScriptError(script))
# result of initial is 2 * 2.5
self.failUnlessEqual(memOutputInitialBuffer[0], 5.0)
# set up data for dynamic part
# create buffer 1: dynamicInput, initialize with 1
dynamicInput = scalarSpatialBufferType(1, 1, 1, 1)
data[1] = ctypes.cast(dynamicInput,ctypes.c_void_p)
# buffer 2: the indexedArray for memInputRelation
# 1 dimension of lenght 2
class indexedArrayType(ctypes.Structure):
_fields_ = [ ("nrDims", ctypes.c_uint32),
("lengthOfDimension1", ctypes.c_uint32),
("values", ctypes.c_float * 2) ]
indexedArray = indexedArrayType()
indexedArray.nrDims = 1
indexedArray.lengthOfDimension1 = 2
indexedArray.values[0] = 4.5 # map lookup value of 1 to 4.5
indexedArray.values[1] = 0.5 # map lookup value of 1 to 0.5
data[2] = ctypes.cast(ctypes.addressof(indexedArray),ctypes.c_void_p)
# create buffer 3: memOutputDynamic, initialize with 1
memOutputDynamic = scalarSpatialBufferType(1, 1, 1, 1)
data[3] = ctypes.cast(memOutputDynamic,ctypes.c_void_p)
# create buffer 5: for rainZone
nominalSpatialBufferType = ctypes.c_uint32 * nrCells
rainZoneBuffer = nominalSpatialBufferType(
2, 2, # first row will read 2nd memInputRelation array entry
1, 8 # 2nd row: first col, read 2nd memInputRelation array entry
# 2nd col, yield MV since there is no 8th entry in memInputRelation array
)
data[5] = ctypes.cast(rainZoneBuffer,ctypes.c_void_p)
# execute timestep
step = 1
while step <= 3:
status = c.pcr_ScriptExecuteNextTimeStepMemory(script, data)
self.failUnless(status >= 0)
if status == 0 and _enablePrintInExamples:
print("last timestep executed")
if _enablePrintInExamples:
print("memOutputDynamic at step %d: (\n%f, %f,\n%f, %f ) \n " % \
(step,
memOutputDynamic[0],
memOutputDynamic[1],
memOutputDynamic[2],
memOutputDynamic[3]))
# update the dynamicInput
# multiply the value by 10
for i in range(nrCells):
dynamicInput[i] *= 10
# update the lookup table dynamic
for i in range(2):
indexedArray.values[i] -= 0.1
error = c.pcr_ScriptErrorMessage(script)
self.failUnless(not c.pcr_ScriptError(script))
step = step + 1
import sys
# simple application using
# the low level C functions of PCRasterModelEngine
from PCRasterLinkOut import c
print("PCRaster link out test driver")
if len(sys.argv) != 2:
print("USAGE: LinkOutTestDriver inputModelFile.xml")
sys.exit(1)
# argv[1] is an xml file
script = c.pcr_createScriptFromXMLFile(sys.argv[1])
if script == None:
raise Exception(sys.argv[1]+":PANIC allocation of a few bytes failed")
try:
# typical error: sys.argv[1] is not existant
if c.pcr_ScriptError(script):
raise Exception(sys.argv[1]+":"+c.pcr_ScriptErrorMessage(script))
c.pcr_ScriptExecute(script)
# typical errors:
# xml is malformed
# some inputs are not found
# resource error: memory/disk full
if c.pcr_ScriptError(script):
raise(Exception, sys.argv[1]+":"+c.pcr_ScriptErrorMessage(script))
finally:
def testDynamicModel(self):
nrCells = 2 * 2
scalarNonSpatialBufferType = ctypes.c_float * 1
scalarSpatialBufferType = ctypes.c_float * nrCells
script = c.pcr_createScriptFromXMLFile("dynamicModel.xml")
self.failUnless(script != None)
self.failUnless(not c.pcr_ScriptError(script))
# initialize data array with all 0 ptrs
dataTransferArraySize = 6
dataTransferArrayType = ctypes.c_void_p * dataTransferArraySize
data = dataTransferArrayType()
# create buffer 0: initialInput: a NonSpatial with value 2.5
initialInputBuffer = scalarNonSpatialBufferType(2.5)
# register buffer in data
data[0] = ctypes.cast(initialInputBuffer, ctypes.c_void_p)
# create buffer 4: memOutputInitial
memOutputInitialBuffer = scalarNonSpatialBufferType(-1)
self.failUnlessEqual(memOutputInitialBuffer[0], -1)
data[4] = ctypes.cast(memOutputInitialBuffer, ctypes.c_void_p)
# call initial, data has values for data used in initial
# other entries are 0
c.pcr_ScriptExecuteInitialStepMemory(script, data)
self.failUnless(not c.pcr_ScriptError(script))
# result of initial is 2 * 2.5
self.failUnlessEqual(memOutputInitialBuffer[0], 5.0)
# set up data for dynamic part
# create buffer 1: dynamicInput, initialize with 1
dynamicInput = scalarSpatialBufferType(1, 1, 1, 1)
data[1] = ctypes.cast(dynamicInput, ctypes.c_void_p)
# buffer 2: the indexedArray for memInputRelation
# 1 dimension of lenght 2
class indexedArrayType(ctypes.Structure):
_fields_ = [("nrDims", ctypes.c_uint32),
("lengthOfDimension1", ctypes.c_uint32),
("values", ctypes.c_float * 2)]
indexedArray = indexedArrayType()
indexedArray.nrDims = 1
indexedArray.lengthOfDimension1 = 2
indexedArray.values[0] = 4.5 # map lookup value of 1 to 4.5
indexedArray.values[1] = 0.5 # map lookup value of 1 to 0.5
data[2] = ctypes.cast(ctypes.addressof(indexedArray), ctypes.c_void_p)
# create buffer 3: memOutputDynamic, initialize with 1
memOutputDynamic = scalarSpatialBufferType(1, 1, 1, 1)
data[3] = ctypes.cast(memOutputDynamic, ctypes.c_void_p)
# create buffer 5: for rainZone
nominalSpatialBufferType = ctypes.c_uint32 * nrCells
rainZoneBuffer = nominalSpatialBufferType(
2,
2, # first row will read 2nd memInputRelation array entry
1,
8 # 2nd row: first col, read 2nd memInputRelation array entry
# 2nd col, yield MV since there is no 8th entry in memInputRelation array
)
data[5] = ctypes.cast(rainZoneBuffer, ctypes.c_void_p)
# execute timestep
step = 1
while step <= 3:
status = c.pcr_ScriptExecuteNextTimeStepMemory(script, data)
self.failUnless(status >= 0)
if status == 0 and _enablePrintInExamples:
print("last timestep executed")
if _enablePrintInExamples:
print("memOutputDynamic at step %d: (\n%f, %f,\n%f, %f ) \n " % \
(step,
memOutputDynamic[0],
memOutputDynamic[1],
memOutputDynamic[2],
memOutputDynamic[3]))
# update the dynamicInput
# multiply the value by 10
for i in range(nrCells):
dynamicInput[i] *= 10
# update the lookup table dynamic
for i in range(2):
indexedArray.values[i] -= 0.1
error = c.pcr_ScriptErrorMessage(script)
self.failUnless(not c.pcr_ScriptError(script))
step = step + 1
