def determine_ref_background(obj, no_bkg=False):
"""
This function takes in a collection of pixels that have been selected as
the reflectometer background. The pixels are summed into a single spectrum
and then scaled by the total number of pixels present in the selection.
@param obj: Object containing reflectometer background information
@type obj: C{SOM.SOM}
@param no_bkg: (OPTIONAL) Flag which determines if the background will be
calculated
@type no_bkg: C{boolean}
@return: A length object containing a summed background spectrum scaled by
the total number of background pixels
@rtype: C{SOM.SOM}
"""
import dr_lib
import common_lib
import hlr_utils
# If user does not desire background subtraction or incoming SOM is None,
# return None
if no_bkg or obj is None:
return None
# set up for working through data
o_descr = hlr_utils.get_descr(obj)
if o_descr != "SOM":
raise RuntimeError("Must provide a SOM to the function.")
# Go on
else:
pass
# Combine all background spectra into one
obj1 = dr_lib.sum_all_spectra(obj)
# Determine scaling ratio
ratio = (1.0 / float(len(obj)), 0.0)
# Scale background spectrum by ratio
return common_lib.mult_ncerr(obj1, ratio)
def determine_ref_background(obj, no_bkg=False):
"""
This function takes in a collection of pixels that have been selected as
the reflectometer background. The pixels are summed into a single spectrum
and then scaled by the total number of pixels present in the selection.
@param obj: Object containing reflectometer background information
@type obj: C{SOM.SOM}
@param no_bkg: (OPTIONAL) Flag which determines if the background will be
calculated
@type no_bkg: C{boolean}
@return: A length object containing a summed background spectrum scaled by
the total number of background pixels
@rtype: C{SOM.SOM}
"""
import dr_lib
import common_lib
import hlr_utils
# If user does not desire background subtraction or incoming SOM is None,
# return None
if no_bkg or obj is None:
return None
# set up for working through data
o_descr = hlr_utils.get_descr(obj)
if o_descr != "SOM":
raise RuntimeError("Must provide a SOM to the function.")
# Go on
else:
pass
# Combine all background spectra into one
obj1 = dr_lib.sum_all_spectra(obj)
# Determine scaling ratio
ratio = (1.0 / float(len(obj)), 0.0)
# Scale background spectrum by ratio
return common_lib.mult_ncerr(obj1, ratio)
def run(config, tim=None):
"""
This method is where the data reduction process gets done.
@param config: Object containing the data reduction configuration
information.
@type config: L{hlr_utils.Configure}
@param tim: (OPTIONAL) Object that will allow the method to perform
timing evaluations.
@type tim: C{sns_time.DiffTime}
"""
import common_lib
import dr_lib
import DST
if tim is not None:
tim.getTime(False)
old_time = tim.getOldTime()
if config.data is None:
raise RuntimeError("Need to pass a data filename to the driver "\
+"script.")
# Read in geometry if one is provided
if config.inst_geom is not None:
if config.verbose:
print "Reading in instrument geometry file"
inst_geom_dst = DST.getInstance("application/x-NxsGeom",
config.inst_geom)
else:
inst_geom_dst = None
# Perform early background subtraction if the hwfix flag is used
if config.hwfix:
if not config.mc:
so_axis = "time_of_flight"
else:
so_axis = "Time_of_Flight"
bkg_som0 = dr_lib.add_files(config.back,
Data_Paths=config.data_paths.toPath(),
SO_Axis=so_axis,
Signal_ROI=config.roi_file,
dataset_type="background",
Verbose=config.verbose, Timer=tim)
bkg_som = dr_lib.fix_bin_contents(bkg_som0)
del bkg_som0
else:
bkg_som = None
# Perform Steps 1-15 on sample data
d_som1 = dr_lib.process_igs_data(config.data, config, timer=tim,
inst_geom_dst=inst_geom_dst,
tib_const=config.tib_data_const,
bkg_som=bkg_som)
# Perform Steps 1-15 on empty can data
if config.ecan is not None:
e_som1 = dr_lib.process_igs_data(config.ecan, config, timer=tim,
inst_geom_dst=inst_geom_dst,
dataset_type="empty_can",
tib_const=config.tib_ecan_const,
bkg_som=bkg_som)
else:
e_som1 = None
# Perform Steps 1-15 on normalization data
if config.norm is not None:
n_som1 = dr_lib.process_igs_data(config.norm, config, timer=tim,
inst_geom_dst=inst_geom_dst,
dataset_type="normalization",
tib_const=config.tib_norm_const,
bkg_som=bkg_som)
else:
n_som1 = None
# Perform Steps 1-15 on background data
if config.back is not None:
b_som1 = dr_lib.process_igs_data(config.back, config, timer=tim,
inst_geom_dst=inst_geom_dst,
dataset_type="background",
tib_const=config.tib_back_const,
bkg_som=bkg_som)
else:
b_som1 = None
# Perform Step 1-15 on direct scattering background data
if config.dsback is not None:
ds_som1 = dr_lib.process_igs_data(config.dsback, config, timer=tim,
inst_geom_dst=inst_geom_dst,
tib_const=config.tib_dsback_const,
dataset_type="dsbackground",
bkg_som=bkg_som)
# Note: time_zero_slope MUST be a tuple
if config.time_zero_slope is not None:
ds_som1.attr_list["Time_zero_slope"] = \
config.time_zero_slope.toValErrTuple()
# Note: time_zero_offset MUST be a tuple
if config.time_zero_offset is not None:
ds_som1.attr_list["Time_zero_offset"] = \
config.time_zero_offset.toValErrTuple()
# Step 16: Linearly interpolate TOF elastic range in direct scattering
# background data
# First convert TOF elastic range to appropriate pixel initial
# wavelengths
if config.verbose:
print "Determining initial wavelength range for elastic line"
if tim is not None:
tim.getTime(False)
if config.tof_elastic is None:
# Units are in microseconds
tof_elastic_range = (140300, 141300)
else:
tof_elastic_range = config.tof_elastic
ctof_elastic_low = dr_lib.convert_single_to_list(\
"tof_to_initial_wavelength_igs_lin_time_zero",
(tof_elastic_range[0], 0.0),
ds_som1)
ctof_elastic_high = dr_lib.convert_single_to_list(\
"tof_to_initial_wavelength_igs_lin_time_zero",
(tof_elastic_range[1], 0.0),
ds_som1)
ctof_elastic_range = [(ctof_elastic_low[i][0], ctof_elastic_high[i][0])
for i in xrange(len(ctof_elastic_low))]
if tim is not None:
tim.getTime(msg="After calculating initial wavelength range for "\
+"elastic line ")
del ctof_elastic_low, ctof_elastic_high
if config.split:
lambda_filter = [(d_som1[i].axis[0].val[0],
d_som1[i].axis[0].val[-1])
for i in xrange(len(d_som1))]
else:
lambda_filter = None
# Now interpolate spectra between TOF elastic range (converted to
# initial wavelength)
if config.verbose:
print "Linearly interpolating direct scattering spectra"
if tim is not None:
tim.getTime(False)
ds_som2 = dr_lib.lin_interpolate_spectra(ds_som1, ctof_elastic_range,
filter_axis=lambda_filter)
if tim is not None:
tim.getTime(msg="After linearly interpolating direct scattering "\
+"spectra ")
if config.dump_dslin:
ds_som2_1 = dr_lib.sum_all_spectra(ds_som2,\
rebin_axis=config.lambda_bins.toNessiList())
hlr_utils.write_file(config.output, "text/Spec", ds_som2_1,
output_ext="lin",
data_ext=config.ext_replacement,
path_replacement=config.path_replacement,
verbose=config.verbose,
message="dsbackground linear interpolation")
del ds_som2_1
del ds_som1
else:
ds_som2 = None
if inst_geom_dst is not None:
inst_geom_dst.release_resource()
# Steps 17-18: Subtract background spectrum from sample spectrum
if config.dsback is None:
back_som = b_som1
bkg_type = "background"
else:
back_som = ds_som2
bkg_type = "dsbackground"
d_som2 = dr_lib.subtract_bkg_from_data(d_som1, back_som,
verbose=config.verbose,
timer=tim,
dataset1="data",
dataset2=bkg_type,
scale=config.scale_bs)
if config.dsback is not None:
del ds_som2
# Step 19: Zero region outside TOF elastic for background for empty can
if config.dsback is None:
bcs_som = b_som1
cs_som = e_som1
else:
if config.verbose and b_som1 is not None:
print "Zeroing background spectra"
if tim is not None and b_som1 is not None:
tim.getTime(False)
bcs_som = dr_lib.zero_spectra(b_som1, ctof_elastic_range)
if tim is not None and b_som1 is not None:
tim.getTime(msg="After zeroing background spectra")
if config.verbose and e_som1 is not None:
print "Zeroing empty can spectra"
if tim is not None and e_som1 is not None:
tim.getTime(False)
cs_som = dr_lib.zero_spectra(e_som1, ctof_elastic_range)
if tim is not None and e_som1 is not None:
tim.getTime(msg="After zeroing empty can spectra")
del ctof_elastic_range
# Steps 20-21: Subtract background spectrum from empty can spectrum
e_som2 = dr_lib.subtract_bkg_from_data(cs_som, bcs_som,
verbose=config.verbose,
timer=tim,
dataset1="data-empty_can",
dataset2="background",
scale=config.scale_bcs)
# Steps 22-23: Subtract background spectrum from empty can spectrum for
# normalization
try:
config.pre_norm
except AttributeError:
config.pre_norm = False
if not config.pre_norm:
e_som3 = dr_lib.subtract_bkg_from_data(e_som1, b_som1,
verbose=config.verbose,
timer=tim,
dataset1="norm-empty_can",
dataset2="background",
scale=config.scale_bcn)
else:
e_som3 = None
# Steps 24-25: Subtract background spectrum from normalization spectrum
if not config.pre_norm:
n_som2 = dr_lib.subtract_bkg_from_data(n_som1, b_som1,
verbose=config.verbose,
timer=tim,
dataset1="normalization",
dataset2="background",
scale=config.scale_bn)
else:
n_som2 = n_som1
del b_som1, e_som1, bcs_som, cs_som
# Steps 26-27: Subtract empty can spectrum from sample spectrum
d_som3 = dr_lib.subtract_bkg_from_data(d_som2, e_som2,
verbose=config.verbose,
timer=tim,
dataset1="data",
dataset2="empty_can",
scale=config.scale_cs)
del d_som2, e_som2
# Steps 28-29: Subtract empty can spectrum from normalization spectrum
if not config.pre_norm:
n_som3 = dr_lib.subtract_bkg_from_data(n_som2, e_som3,
verbose=config.verbose,
timer=tim,
dataset1="normalization",
dataset2="empty_can",
scale=config.scale_cn)
else:
n_som3 = n_som2
del n_som2, e_som3
# Step 30-31: Integrate normalization spectra
if config.verbose and n_som3 is not None and not config.pre_norm:
print "Integrating normalization spectra"
if not config.pre_norm:
norm_int = dr_lib.integrate_spectra(n_som3, start=config.norm_start,
end=config.norm_end, norm=True)
else:
norm_int = n_som3
del n_som3
# Step 32: Normalize data by integrated values
if config.verbose and norm_int is not None:
print "Normalizing data by normalization data"
if norm_int is not None:
d_som4 = common_lib.div_ncerr(d_som3, norm_int)
else:
d_som4 = d_som3
if norm_int is not None:
if tim is not None:
tim.getTime(msg="After normalizing data ")
del d_som3, norm_int
if config.dump_norm:
if tim is not None:
tim.getTime(False)
hlr_utils.write_file(config.output, "text/Spec", d_som4,
output_ext="wvn",
data_ext=config.ext_replacement,
path_replacement=config.path_replacement,
verbose=config.verbose,
message="wavelength (vanadium norm) information")
if tim is not None:
tim.getTime(msg="After writing wavelength (vanadium norm) info ")
# Steps 33 to end: Creating S(Q,E)
if config.Q_bins is not None:
if config.verbose:
print "Creating 2D spectrum"
if tim is not None:
tim.getTime(False)
d_som5 = dr_lib.create_E_vs_Q_igs(d_som4,
config.E_bins.toNessiList(),
config.Q_bins.toNessiList(),
so_id="Full Detector",
y_label="counts",
y_units="counts / (ueV * A^-1)",
x_labels=["Q transfer",
"energy transfer"],
x_units=["1/Angstroms","ueV"],
split=config.split,
Q_filter=False,
configure=config)
if tim is not None:
tim.getTime(msg="After creation of final spectrum ")
del d_som4
# Steps 33 to 36: Create S(-cos(polar), E)
elif config.ncospol_bins is not None:
if config.verbose:
print "Convert wavelength to energy transfer"
if tim is not None:
tim.getTime(False)
d_som4a = dr_lib.energy_transfer(d_som4, "IGS", "Wavelength_final",
sa_norm=True, scale=True,
change_units=True)
if tim is not None:
tim.getTime(msg="After wavelength to energy transfer conversion ")
del d_som4
if config.verbose:
print "Creating 2D spectrum"
if tim is not None:
tim.getTime(False)
d_som5 = dr_lib.create_param_vs_Y(d_som4a, "polar",
"negcos_param_array",
config.ncospol_bins.toNessiList(),
rebin_axis=config.E_bins.toNessiList(),
y_label="counts",
y_units="counts / ueV",
x_labels=["-cos(polar)",
"Energy Transfer"],
x_units=["", "ueV"])
if tim is not None:
tim.getTime(msg="After creation of final spectrum ")
# If rescaling factor present, rescale the data
if config.rescale_final is not None and not config.split:
d_som6 = common_lib.mult_ncerr(d_som5, (config.rescale_final, 0.0))
else:
d_som6 = d_som5
if tim is None:
old_time = None
if not __name__ == "amorphous_reduction_sqe":
del d_som5
__write_output(d_som6, config, tim, old_time)
else:
if config.create_output:
del d_som5
__write_output(d_som6, config, tim, old_time)
else:
return d_som6
def run(config, tim=None):
"""
This method is where the data reduction process gets done.
@param config: Object containing the data reduction configuration
information.
@type config: L{hlr_utils.Configure}
@param tim: (OPTIONAL) Object that will allow the method to perform
timing evaluations.
@type tim: C{sns_time.DiffTime}
"""
import common_lib
import dr_lib
import DST
if tim is not None:
tim.getTime(False)
old_time = tim.getOldTime()
if config.data is None:
raise RuntimeError("Need to pass a data filename to the driver "\
+"script.")
# Read in geometry if one is provided
if config.inst_geom is not None:
if config.verbose:
print "Reading in instrument geometry file"
inst_geom_dst = DST.getInstance("application/x-NxsGeom",
config.inst_geom)
else:
inst_geom_dst = None
config.so_axis = "time_of_flight"
try:
if type(config.mask_file) == type([]):
if len(config.mask_file) > 1:
if config.verbose:
print "Creating combined mask file"
if tim is not None:
tim.getTime(False)
config.mask_file = hlr_utils.merge_roi_files(\
config.mask_file,
config)
if tim is not None:
tim.getTime(msg="After creating combined mask file")
else:
config.mask_file = config.mask_file[0]
else:
# Do nothing since it's already a string
pass
except TypeError:
# No mask files provided, do nothing
pass
# Steps 1-3: Produce a scaled summed dark current dataset
dc_som = dr_lib.scaled_summed_data(config.dkcur, config,
dataset_type="dark_current",
timer=tim)
# Perform Steps 3-6 on black can data
if config.bcan is not None:
b_som1 = dr_lib.calibrate_dgs_data(config.bcan, config, dc_som,
dataset_type="black_can",
inst_geom_dst=inst_geom_dst,
tib_const=config.tib_const,
cwp=config.cwp_bcan,
timer=tim)
else:
b_som1 = None
# Perform Steps 3-6 on empty can data
if config.ecan is not None:
e_som1 = dr_lib.calibrate_dgs_data(config.ecan, config, dc_som,
dataset_type="empty_can",
inst_geom_dst=inst_geom_dst,
tib_const=config.tib_const,
cwp=config.cwp_ecan,
timer=tim)
else:
e_som1 = None
# Perform Steps 3-6 on sample data
d_som1 = dr_lib.calibrate_dgs_data(config.data, config, dc_som,
inst_geom_dst=inst_geom_dst,
tib_const=config.tib_const,
cwp=config.cwp_data,
timer=tim)
# Perform Steps 7-16 on sample data
if config.data_trans_coeff is None:
data_trans_coeff = None
else:
data_trans_coeff = config.data_trans_coeff.toValErrTuple()
# Determine if we need to rebin the empty or black can data
if config.ecan is not None and e_som1 is not None:
ecan_cwp = True
else:
ecan_cwp = False
if config.bcan is not None and b_som1 is not None:
bcan_cwp = True
else:
bcan_cwp = False
cwp_used = ecan_cwp or bcan_cwp
d_som2 = dr_lib.process_dgs_data(d_som1, config, b_som1, e_som1,
data_trans_coeff, cwp_used=cwp_used,
timer=tim)
del d_som1
del b_som1, e_som1
# Step 18: Normalize sample data by integrated values
if config.norm is not None:
if config.verbose:
print "Reading normalization information"
norm_int = dr_lib.add_files(config.norm, Signal_ROI=config.roi_file,
Signal_MASK=config.mask_file,
dataset_type="normalization",
dst_type="text/num-info",
Verbose=config.verbose,
Timer=tim)
# Make the labels and units compatible with a NeXus file based SOM
norm_int.setAllAxisLabels(["wavelength"])
norm_int.setAllAxisUnits(["Angstroms"])
norm_int.setYLabel("Intensity")
norm_int.setYUnits("Counts/Angstroms")
if config.verbose:
print "Normalizing data by normalization data"
if tim is not None:
tim.getTime(False)
d_som3 = common_lib.div_ncerr(d_som2, norm_int)
if tim is not None:
tim.getTime(msg="After normalizing data ")
del norm_int
else:
d_som3 = d_som2
del d_som2
# Step 19: Calculate the initial energy
if config.initial_energy is not None:
d_som3.attr_list["Initial_Energy"] = config.initial_energy
# Steps 20-21: Calculate the energy transfer
if config.verbose:
print "Calculating energy transfer"
if tim is not None:
tim.getTime(False)
d_som4 = dr_lib.energy_transfer(d_som3, "DGS", "Initial_Energy",
lojac=True, scale=config.lambda_ratio)
if tim is not None:
tim.getTime(msg="After calculating energy transfer ")
del d_som3
# Step 22: Rebin energy transfer spectra
if config.verbose:
print "Rebinning to final energy transfer axis"
if tim is not None:
tim.getTime(False)
d_som5 = common_lib.rebin_axis_1D_frac(d_som4, config.E_bins.toNessiList())
if tim is not None:
tim.getTime(msg="After rebinning energy transfer ")
del d_som4
if config.dump_et_comb:
d_som5_1 = dr_lib.sum_all_spectra(d_som5)
hlr_utils.write_file(config.output, "text/Spec", d_som5_1,
output_ext="et",
data_ext=config.ext_replacement,
path_replacement=config.path_replacement,
verbose=config.verbose,
message="combined energy transfer information")
del d_som5_1
# Get the corner geometry information
if config.verbose:
print "Reading in corner geometry information"
if tim is not None:
tim.getTime(False)
corner_angles = hlr_utils.get_corner_geometry(config.corner_geom)
if tim is not None:
tim.getTime(msg="After reading in corner geometry information ")
if config.make_spe:
d_som5.attr_list["corner_geom"] = corner_angles
hlr_utils.write_file(config.output, "text/PHX", d_som5,
output_ext="phx",
data_ext=config.ext_replacement,
path_replacement=config.path_replacement,
verbose=config.verbose,
message="PHX information")
hlr_utils.write_file(config.output, "text/PAR", d_som5,
output_ext="par",
data_ext=config.ext_replacement,
path_replacement=config.path_replacement,
verbose=config.verbose,
message="PAR information")
hlr_utils.write_file(config.output, "text/SPE", d_som5,
output_ext="spe",
data_ext=config.ext_replacement,
path_replacement=config.path_replacement,
verbose=config.verbose,
message="SPE information")
# Steps 23-34: Create S(Q, E) distribution
if config.verbose:
print "Creating S(Q, E)"
if tim is not None:
tim.getTime(False)
d_som5_2 = dr_lib.create_E_vs_Q_dgs(d_som5,
config.initial_energy.toValErrTuple(),
config.Q_bins.toNessiList(),
corner_angles=corner_angles,
split=config.split,
configure=config,
timer=tim)
# Writing 2D DAVE file
if not config.split:
hlr_utils.write_file(config.output, "text/Dave2d", d_som5_2,
output_ext="sqe",
data_ext=config.ext_replacement,
path_replacement=config.path_replacement,
verbose=config.verbose,
message="S(Q,E)")
hlr_utils.write_file(config.output, "application/x-RedNxs", d_som5_2,
output_ext="nxs",
data_ext=config.ext_replacement,
path_replacement=config.path_replacement,
verbose=config.verbose,
extra_tag="sqe",
getsom_kwargs={"entry_name": "sqe"},
message="NeXus S(Q,E)")
if tim is not None:
tim.getTime(msg="After calculating S(Q,E) spectrum ")
del d_som5_2
if config.qmesh:
# Steps 23-27,35-36: Create S(Qvec, E) distribution
if config.verbose:
print "Creating S(Qvec, E)"
if tim is not None:
tim.getTime(False)
dr_lib.create_Qvec_vs_E_dgs(d_som5,
config.initial_energy.toValErrTuple(),
config, corner_angles=corner_angles,
make_fixed=config.fixed,
output=config.output,
timer=tim)
if tim is not None:
tim.getTime(msg="After calculating final spectrum ")
# Write out RMD file
d_som5.attr_list["config"] = config
hlr_utils.write_file(config.output, "text/rmd", d_som5,
output_ext="rmd",
data_ext=config.ext_replacement,
path_replacement=config.path_replacement,
verbose=config.verbose,
message="metadata")
if tim is not None:
tim.setOldTime(old_time)
tim.getTime(msg="Total Running Time")
def process_ref_data(datalist,
conf,
signal_roi_file,
bkg_roi_file=None,
no_bkg=False,
**kwargs):
"""
This function combines Steps 1 through 6 in section 2.4.5 of the data
reduction process for Reflectometers (without Monitors) as specified by
the document at
U{http://neutrons.ornl.gov/asg/projects/SCL/reqspec/DR_Lib_RS.doc}. The
function takes a list of file names, a L{hlr_utils.Configure} object,
signal and background region-of-interest (ROI) files and an optional flag
about background subtraction and processes the data accordingly.
@param datalist: The filenames of the data to be processed
@type datalist: C{list} of C{string}s
@param conf: Object that contains the current setup of the driver
@type conf: L{hlr_utils.Configure}
@param signal_roi_file: The file containing the list of pixel IDs for the
signal region of interest.
@type signal_roi_file: C{string}
@param bkg_roi_file: The file containing the list of pixel IDs for the
(possible) background region of interest.
@type bkg_roi_file: C{string}
@param no_bkg: (OPTIONAL) Flag which determines if the background will be
calculated and subtracted.
@type no_bkg: C{boolean}
@param kwargs: A list of keyword arguments that the function accepts:
@keyword inst_geom_dst: Object that contains the instrument geometry
information.
@type inst_geom_dst: C{DST.getInstance()}
@keyword dataset_type: The practical name of the dataset being processed.
The default value is I{data}.
@type dataset_type: C{string}
@keyword tof_cuts: Time-of-flight bins to remove (zero) from the data
@type tof_cuts: C{list} of C{string}s
@keyword no_tof_cuts: Flag to stop application of the TOF cuts
@type no_tof_cuts: C{boolean}
@keyword timer: Timing object so the function can perform timing
estimates.
@type timer: C{sns_timer.DiffTime}
@return: Object that has undergone all requested processing steps
@rtype: C{SOM.SOM}
"""
import common_lib
import dr_lib
import hlr_utils
# Check keywords
try:
dataset_type = kwargs["dataset_type"]
except KeyError:
dataset_type = "data"
if dataset_type != "data" and dataset_type != "norm":
raise RuntimeError("Please use data or norm to specify the dataset "\
+"type. Do not understand how to handle %s." \
% dataset_type)
try:
t = kwargs["timer"]
except KeyError:
t = None
try:
i_geom_dst = kwargs["inst_geom_dst"]
except KeyError:
i_geom_dst = None
try:
tof_cuts = kwargs["tof_cuts"]
except KeyError:
tof_cuts = None
no_tof_cuts = kwargs.get("no_tof_cuts", False)
so_axis = "time_of_flight"
# Step 0: Open data files and select signal (and possible background) ROIs
if conf.verbose:
print "Reading %s file" % dataset_type
if len(conf.norm_data_paths) and dataset_type == "norm":
data_path = conf.norm_data_paths.toPath()
else:
data_path = conf.data_paths.toPath()
(d_som1, b_som1) = dr_lib.add_files_bg(datalist,
Data_Paths=data_path,
SO_Axis=so_axis,
dataset_type=dataset_type,
Signal_ROI=signal_roi_file,
Bkg_ROI=bkg_roi_file,
Verbose=conf.verbose,
Timer=t)
if t is not None:
t.getTime(msg="After reading %s " % dataset_type)
if i_geom_dst is not None:
i_geom_dst.setGeometry(conf.data_paths.toPath(), d_som1)
# Calculate delta t over t
if conf.verbose:
print "Calculating delta t over t"
dtot = dr_lib.calc_deltat_over_t(d_som1[0].axis[0].val)
# Calculate delta theta over theta
if conf.verbose:
print "Calculating delta theta over theta"
dr_lib.calc_delta_theta_over_theta(d_som1, dataset_type)
# Step 1: Sum all spectra along the low resolution direction
# Set sorting
(y_sort, cent_pixel) = hlr_utils.get_ref_integration_direction(
conf.int_dir, conf.inst, d_som1.attr_list.instrument)
if dataset_type == "data":
d_som1.attr_list["ref_sort"] = y_sort
d_som1A = dr_lib.sum_all_spectra(d_som1,
y_sort=y_sort,
stripe=True,
pixel_fix=cent_pixel)
del d_som1
if b_som1 is not None:
b_som1A = dr_lib.sum_all_spectra(b_som1,
y_sort=y_sort,
stripe=True,
pixel_fix=cent_pixel)
del b_som1
else:
b_som1A = b_som1
# Set the TOF cuts
if no_tof_cuts:
tof_cut_min = None
tof_cut_max = None
else:
tof_cut_min = conf.tof_cut_min
tof_cut_max = conf.tof_cut_max
# Cut the spectra if necessary
d_som2 = dr_lib.cut_spectra(d_som1A, tof_cut_min, tof_cut_max)
del d_som1A
if b_som1A is not None:
b_som2 = dr_lib.cut_spectra(b_som1A, tof_cut_min, tof_cut_max)
del b_som1A
else:
b_som2 = b_som1A
# Fix TOF cuts to make them list of integers
try:
tof_cuts = [int(x) for x in tof_cuts]
# This will trigger if tof_cuts is None
except TypeError:
pass
d_som3 = dr_lib.zero_bins(d_som2, tof_cuts)
del d_som2
if b_som2 is not None:
b_som3 = dr_lib.zero_bins(b_som2, tof_cuts)
del b_som2
else:
b_som3 = b_som2
if conf.dump_specular:
if no_tof_cuts:
d_som3_1 = dr_lib.cut_spectra(d_som3, conf.tof_cut_min,
conf.tof_cut_max)
else:
d_som3_1 = d_som3
hlr_utils.write_file(conf.output,
"text/Spec",
d_som3_1,
output_ext="sdc",
extra_tag=dataset_type,
verbose=conf.verbose,
data_ext=conf.ext_replacement,
path_replacement=conf.path_replacement,
message="specular TOF information")
del d_som3_1
# Steps 2-4: Determine background spectrum
if conf.verbose and not no_bkg:
print "Determining %s background" % dataset_type
if dataset_type == "data":
peak_excl = conf.data_peak_excl
elif dataset_type == "norm":
peak_excl = conf.norm_peak_excl
if b_som3 is not None:
B = dr_lib.calculate_ref_background(b_som3,
no_bkg,
conf.inst,
None,
aobj=d_som3)
else:
B = dr_lib.calculate_ref_background(d_som3, no_bkg, conf.inst,
peak_excl)
if t is not None:
t.getTime(msg="After background determination")
if not no_bkg and conf.dump_bkg:
if no_tof_cuts:
B_1 = dr_lib.cut_spectra(B, conf.tof_cut_min, conf.tof_cut_max)
else:
B_1 = B
hlr_utils.write_file(conf.output,
"text/Spec",
B_1,
output_ext="bkg",
extra_tag=dataset_type,
verbose=conf.verbose,
data_ext=conf.ext_replacement,
path_replacement=conf.path_replacement,
message="background TOF information")
del B_1
# Step 5: Subtract background spectrum from data spectra
if not no_bkg:
d_som4 = dr_lib.subtract_bkg_from_data(d_som3,
B,
verbose=conf.verbose,
timer=t,
dataset1="data",
dataset2="background")
else:
d_som4 = d_som3
del d_som3
if not no_bkg and conf.dump_sub:
if no_tof_cuts:
d_som4_1 = dr_lib.cut_spectra(d_som4, conf.tof_cut_min,
conf.tof_cut_max)
else:
d_som4_1 = d_som4
hlr_utils.write_file(conf.output,
"text/Spec",
d_som4_1,
output_ext="sub",
extra_tag=dataset_type,
verbose=conf.verbose,
data_ext=conf.ext_replacement,
path_replacement=conf.path_replacement,
message="subtracted TOF information")
del d_som4_1
dtot_int = dr_lib.integrate_axis_py(dtot, avg=True)
param_key = dataset_type + "-dt_over_t"
d_som4.attr_list[param_key] = dtot_int[0]
if conf.store_dtot:
d_som4.attr_list["extra_som"] = dtot
# Step 6: Scale by proton charge
pc = d_som4.attr_list[dataset_type + "-proton_charge"]
pc_new = hlr_utils.scale_proton_charge(pc, "C")
d_som5 = common_lib.div_ncerr(d_som4, (pc_new.getValue(), 0.0))
del d_som4
return d_som5
def run(config):
"""
This method is where the data reduction process gets done.
@param config: Object containing the data reduction configuration
information.
@type config: L{hlr_utils.Configure}
"""
import sys
import dr_lib
import DST
import SOM
banks = [("/entry/bank1", 1), ("/entry/bank2", 1)]
max_ids = (64, 64)
if config.vertical:
tag = "v"
size = max_ids[1]
reps = max_ids[0] / config.pixel_group
label = "Integrated pixel"
else:
tag = "h"
size = max_ids[1] / config.pixel_group
reps = max_ids[0] / config.sum_tubes
label = "Tube Number"
try:
data_dst = DST.getInstance("application/x-NeXus", config.data)
except SystemError:
print "ERROR: Failed to data read file %s" % config.data
sys.exit(-1)
so_axis = "time_of_flight"
for path in banks:
bank = path[0].split('/')[-1]
for i in range(size):
tSOM = SOM.SOM()
tSO = SOM.SO(construct=True)
counter = 1
for j in range(reps):
if config.vertical:
starting_id = (i, config.pixel_group * j)
ending_id = (i + 1, config.pixel_group * (j + 1))
else:
if config.sum_tubes == 1:
x1 = j
x2 = j + 1
else:
x1 = j * config.sum_tubes
x2 = (j + 1) * config.sum_tubes
starting_id = (x1, config.pixel_group * i)
ending_id = (x2, config.pixel_group * (i + 1))
d_som1 = data_dst.getSOM(path,
so_axis,
start_id=starting_id,
end_id=ending_id)
d_som2 = dr_lib.sum_all_spectra(d_som1)
d_som2[0].id = d_som1[0].id
d_som1 = None
del d_som1
value = dr_lib.integrate_axis(d_som2)
if config.verbose:
print "Sum", d_som2[0].id, ":", value[0], value[1]
tSO.axis[0].val.append(counter)
tSO.y.append(value[0])
tSO.var_y.append(value[1])
if counter == 1:
tSO.id = d_som2[0].id
counter += 1
tSOM.attr_list["filename"] = config.data
tSOM.setTitle("TOF Pixel Summation")
tSOM.setDataSetType("density")
tSOM.setYLabel("Intensity Sum")
tSOM.setYUnits("counts")
tSOM.setAxisLabel(0, label)
tSOM.setAxisUnits(0, "")
tSOM.append(tSO)
tag1 = str(i + 1)
outfile = bank + "_" + tag + "_" + tag1 + ".tof"
hlr_utils.write_file(outfile,
"text/Spec",
tSOM,
verbose=config.verbose,
message="intensity sum file",
replace_ext=False)
data_dst.release_resource()
def process_dgs_data(obj, conf, bcan, ecan, tcoeff, **kwargs):
"""
This function combines Steps 7 through 16 in Section 2.1.1 of the data
reduction process for Direct Geometry Spectrometers as specified by the
document at
U{http://neutrons.ornl.gov/asg/projects/SCL/reqspec/DR_Lib_RS.doc}. The
function takes a calibrated dataset, a L{hlr_utils.Configure} object and
processes the data accordingly.
@param obj: A calibrated dataset object.
@type obj: C{SOM.SOM}
@param conf: Object that contains the current setup of the driver.
@type conf: L{hlr_utils.Configure}
@param bcan: The object containing the black can data.
@type bcan: C{SOM.SOM}
@param ecan: The object containing the empty can data.
@type ecan: C{SOM.SOM}
@param tcoeff: The transmission coefficient appropriate to the given data
set.
@type tcoeff: C{tuple}
@param kwargs: A list of keyword arguments that the function accepts:
@keyword dataset_type: The practical name of the dataset being processed.
The default value is I{data}.
@type dataset_type: C{string}
@keyword cwp_used: A flag signalling the use of the chopper phase
corrections.
@type cwp_used: C{bool}
@keyword timer: Timing object so the function can perform timing estimates.
@type timer: C{sns_timer.DiffTime}
@return: Object that has undergone all requested processing steps
@rtype: C{SOM.SOM}
"""
import array_manip
import common_lib
import dr_lib
import hlr_utils
# Check keywords
try:
dataset_type = kwargs["dataset_type"]
except KeyError:
dataset_type = "data"
try:
t = kwargs["timer"]
except KeyError:
t = None
cwp_used = kwargs.get("cwp_used", False)
if conf.verbose:
print "Processing %s information" % dataset_type
# Step 7: Create black can background contribution
if bcan is not None:
if conf.verbose:
print "Creating black can background contribution for %s" \
% dataset_type
if t is not None:
t.getTime(False)
bccoeff = array_manip.sub_ncerr(1.0, 0.0, tcoeff[0], tcoeff[1])
bcan1 = common_lib.mult_ncerr(bcan, bccoeff)
if t is not None:
t.getTime(msg="After creating black can background contribution ")
del bcan
else:
bcan1 = None
# Step 8: Create empty can background contribution
if ecan is not None:
if conf.verbose:
print "Creating empty can background contribution for %s" \
% dataset_type
if t is not None:
t.getTime(False)
ecan1 = common_lib.mult_ncerr(ecan, tcoeff)
if t is not None:
t.getTime(msg="After creating empty can background contribution ")
del ecan
else:
ecan1 = None
# Step 9: Create background spectra
if bcan1 is not None or ecan1 is not None and conf.verbose:
print "Creating background spectra for %s" % dataset_type
if bcan1 is not None and ecan1 is not None:
if cwp_used:
if conf.verbose:
print "Rebinning empty can to black can axis."
ecan2 = common_lib.rebin_axis_1D_frac(ecan1, bcan1[0].axis[0].val)
else:
ecan2 = ecan1
del ecan1
if t is not None:
t.getTime(False)
b_som = common_lib.add_ncerr(bcan1, ecan2)
if t is not None:
t.getTime(msg="After creating background spectra ")
elif bcan1 is not None and ecan1 is None:
b_som = bcan1
elif bcan1 is None and ecan1 is not None:
b_som = ecan1
else:
b_som = None
del bcan1, ecan1
if cwp_used:
if conf.verbose:
print "Rebinning background spectra to %s" % dataset_type
b_som1 = common_lib.rebin_axis_1D_frac(b_som, obj[0].axis[0].val)
else:
b_som1 = b_som
del b_som
if conf.dump_ctof_comb and b_som1 is not None:
b_som_1 = dr_lib.sum_all_spectra(b_som1)
hlr_utils.write_file(conf.output,
"text/Spec",
b_som_1,
output_ext="ctof",
extra_tag="background",
data_ext=conf.ext_replacement,
path_replacement=conf.path_replacement,
verbose=conf.verbose,
message="combined background TOF information")
del b_som_1
# Step 10: Subtract background from data
obj1 = dr_lib.subtract_bkg_from_data(obj,
b_som1,
verbose=conf.verbose,
timer=t,
dataset1=dataset_type,
dataset2="background")
del obj, b_som1
# Step 11: Calculate initial velocity
if conf.verbose:
print "Calculating initial velocity"
if t is not None:
t.getTime(False)
if conf.initial_energy is not None:
initial_wavelength = common_lib.energy_to_wavelength(\
conf.initial_energy.toValErrTuple())
initial_velocity = common_lib.wavelength_to_velocity(\
initial_wavelength)
else:
# This should actually calculate it, but don't have a way right now
pass
if t is not None:
t.getTime(msg="After calculating initial velocity ")
# Step 12: Calculate the time-zero offset
if conf.time_zero_offset is not None:
time_zero_offset = conf.time_zero_offset.toValErrTuple()
else:
# This should actually calculate it, but don't have a way right now
time_zero_offset = (0.0, 0.0)
# Step 13: Convert time-of-flight to final velocity
if conf.verbose:
print "Converting TOF to final velocity DGS"
if t is not None:
t.getTime(False)
obj2 = common_lib.tof_to_final_velocity_dgs(obj1,
initial_velocity,
time_zero_offset,
units="microsecond")
if t is not None:
t.getTime(msg="After calculating TOF to final velocity DGS ")
del obj1
# Step 14: Convert final velocity to final wavelength
if conf.verbose:
print "Converting final velocity DGS to final wavelength"
if t is not None:
t.getTime(False)
obj3 = common_lib.velocity_to_wavelength(obj2)
if t is not None:
t.getTime(msg="After calculating velocity to wavelength ")
del obj2
if conf.dump_wave_comb:
obj3_1 = dr_lib.sum_all_spectra(
obj3, rebin_axis=conf.lambda_bins.toNessiList())
hlr_utils.write_file(conf.output,
"text/Spec",
obj3_1,
output_ext="fwv",
extra_tag=dataset_type,
data_ext=conf.ext_replacement,
path_replacement=conf.path_replacement,
verbose=conf.verbose,
message="combined final wavelength information")
del obj3_1
# Step 15: Create the detector efficiency
if conf.det_eff is not None:
if conf.verbose:
print "Creating detector efficiency spectra"
if t is not None:
t.getTime(False)
det_eff = dr_lib.create_det_eff(obj3)
if t is not None:
t.getTime(msg="After creating detector efficiency spectra ")
else:
det_eff = None
# Step 16: Divide the detector pixel spectra by the detector efficiency
if det_eff is not None:
if conf.verbose:
print "Correcting %s for detector efficiency" % dataset_type
if t is not None:
t.getTime(False)
obj4 = common_lib.div_ncerr(obj3, det_eff)
if t is not None:
t.getTime(msg="After correcting %s for detector efficiency" \
% dataset_type)
else:
obj4 = obj3
del obj3, det_eff
return obj4
def run(config, tim=None):
"""
This method is where the data reduction process gets done.
@param config: Object containing the data reduction configuration
information.
@type config: L{hlr_utils.Configure}
@param tim: (OPTIONAL) Object that will allow the method to perform
timing evaluations.
@type tim: C{sns_time.DiffTime}
"""
import common_lib
import dr_lib
import DST
if tim is not None:
tim.getTime(False)
old_time = tim.getOldTime()
if config.data is None:
raise RuntimeError("Need to pass a data filename to the driver "\
+"script.")
# Read in geometry if one is provided
if config.inst_geom is not None:
if config.verbose:
print "Reading in instrument geometry file"
inst_geom_dst = DST.getInstance("application/x-NxsGeom",
config.inst_geom)
else:
inst_geom_dst = None
config.so_axis = "time_of_flight"
try:
if type(config.mask_file) == type([]):
if len(config.mask_file) > 1:
if config.verbose:
print "Creating combined mask file"
if tim is not None:
tim.getTime(False)
config.mask_file = hlr_utils.merge_roi_files(\
config.mask_file,
config)
if tim is not None:
tim.getTime(msg="After creating combined mask file")
else:
config.mask_file = config.mask_file[0]
else:
# Do nothing since it's already a string
pass
except TypeError:
# No mask files provided, do nothing
pass
# Steps 1-3: Produce a scaled summed dark current dataset
dc_som = dr_lib.scaled_summed_data(config.dkcur,
config,
dataset_type="dark_current",
timer=tim)
# Perform Steps 3-6 on black can data
if config.bcan is not None:
b_som1 = dr_lib.calibrate_dgs_data(config.bcan,
config,
dc_som,
dataset_type="black_can",
inst_geom_dst=inst_geom_dst,
tib_const=config.tib_const,
cwp=config.cwp_bcan,
timer=tim)
else:
b_som1 = None
# Perform Steps 3-6 on empty can data
if config.ecan is not None:
e_som1 = dr_lib.calibrate_dgs_data(config.ecan,
config,
dc_som,
dataset_type="empty_can",
inst_geom_dst=inst_geom_dst,
tib_const=config.tib_const,
cwp=config.cwp_ecan,
timer=tim)
else:
e_som1 = None
# Perform Steps 3-6 on sample data
d_som1 = dr_lib.calibrate_dgs_data(config.data,
config,
dc_som,
inst_geom_dst=inst_geom_dst,
tib_const=config.tib_const,
cwp=config.cwp_data,
timer=tim)
# Perform Steps 7-16 on sample data
if config.data_trans_coeff is None:
data_trans_coeff = None
else:
data_trans_coeff = config.data_trans_coeff.toValErrTuple()
# Determine if we need to rebin the empty or black can data
if config.ecan is not None and e_som1 is not None:
ecan_cwp = True
else:
ecan_cwp = False
if config.bcan is not None and b_som1 is not None:
bcan_cwp = True
else:
bcan_cwp = False
cwp_used = ecan_cwp or bcan_cwp
d_som2 = dr_lib.process_dgs_data(d_som1,
config,
b_som1,
e_som1,
data_trans_coeff,
cwp_used=cwp_used,
timer=tim)
del d_som1
del b_som1, e_som1
# Step 18: Normalize sample data by integrated values
if config.norm is not None:
if config.verbose:
print "Reading normalization information"
norm_int = dr_lib.add_files(config.norm,
Signal_ROI=config.roi_file,
Signal_MASK=config.mask_file,
dataset_type="normalization",
dst_type="text/num-info",
Verbose=config.verbose,
Timer=tim)
# Make the labels and units compatible with a NeXus file based SOM
norm_int.setAllAxisLabels(["wavelength"])
norm_int.setAllAxisUnits(["Angstroms"])
norm_int.setYLabel("Intensity")
norm_int.setYUnits("Counts/Angstroms")
if config.verbose:
print "Normalizing data by normalization data"
if tim is not None:
tim.getTime(False)
d_som3 = common_lib.div_ncerr(d_som2, norm_int)
if tim is not None:
tim.getTime(msg="After normalizing data ")
del norm_int
else:
d_som3 = d_som2
del d_som2
# Step 19: Calculate the initial energy
if config.initial_energy is not None:
d_som3.attr_list["Initial_Energy"] = config.initial_energy
# Steps 20-21: Calculate the energy transfer
if config.verbose:
print "Calculating energy transfer"
if tim is not None:
tim.getTime(False)
d_som4 = dr_lib.energy_transfer(d_som3,
"DGS",
"Initial_Energy",
lojac=True,
scale=config.lambda_ratio)
if tim is not None:
tim.getTime(msg="After calculating energy transfer ")
del d_som3
# Step 22: Rebin energy transfer spectra
if config.verbose:
print "Rebinning to final energy transfer axis"
if tim is not None:
tim.getTime(False)
d_som5 = common_lib.rebin_axis_1D_frac(d_som4, config.E_bins.toNessiList())
if tim is not None:
tim.getTime(msg="After rebinning energy transfer ")
del d_som4
if config.dump_et_comb:
d_som5_1 = dr_lib.sum_all_spectra(d_som5)
hlr_utils.write_file(config.output,
"text/Spec",
d_som5_1,
output_ext="et",
data_ext=config.ext_replacement,
path_replacement=config.path_replacement,
verbose=config.verbose,
message="combined energy transfer information")
del d_som5_1
# Get the corner geometry information
if config.verbose:
print "Reading in corner geometry information"
if tim is not None:
tim.getTime(False)
corner_angles = hlr_utils.get_corner_geometry(config.corner_geom)
if tim is not None:
tim.getTime(msg="After reading in corner geometry information ")
if config.make_spe:
d_som5.attr_list["corner_geom"] = corner_angles
hlr_utils.write_file(config.output,
"text/PHX",
d_som5,
output_ext="phx",
data_ext=config.ext_replacement,
path_replacement=config.path_replacement,
verbose=config.verbose,
message="PHX information")
hlr_utils.write_file(config.output,
"text/PAR",
d_som5,
output_ext="par",
data_ext=config.ext_replacement,
path_replacement=config.path_replacement,
verbose=config.verbose,
message="PAR information")
hlr_utils.write_file(config.output,
"text/SPE",
d_som5,
output_ext="spe",
data_ext=config.ext_replacement,
path_replacement=config.path_replacement,
verbose=config.verbose,
message="SPE information")
# Steps 23-34: Create S(Q, E) distribution
if config.verbose:
print "Creating S(Q, E)"
if tim is not None:
tim.getTime(False)
d_som5_2 = dr_lib.create_E_vs_Q_dgs(d_som5,
config.initial_energy.toValErrTuple(),
config.Q_bins.toNessiList(),
corner_angles=corner_angles,
split=config.split,
configure=config,
timer=tim)
# Writing 2D DAVE file
if not config.split:
hlr_utils.write_file(config.output,
"text/Dave2d",
d_som5_2,
output_ext="sqe",
data_ext=config.ext_replacement,
path_replacement=config.path_replacement,
verbose=config.verbose,
message="S(Q,E)")
hlr_utils.write_file(config.output,
"application/x-RedNxs",
d_som5_2,
output_ext="nxs",
data_ext=config.ext_replacement,
path_replacement=config.path_replacement,
verbose=config.verbose,
extra_tag="sqe",
getsom_kwargs={"entry_name": "sqe"},
message="NeXus S(Q,E)")
if tim is not None:
tim.getTime(msg="After calculating S(Q,E) spectrum ")
del d_som5_2
if config.qmesh:
# Steps 23-27,35-36: Create S(Qvec, E) distribution
if config.verbose:
print "Creating S(Qvec, E)"
if tim is not None:
tim.getTime(False)
dr_lib.create_Qvec_vs_E_dgs(d_som5,
config.initial_energy.toValErrTuple(),
config,
corner_angles=corner_angles,
make_fixed=config.fixed,
output=config.output,
timer=tim)
if tim is not None:
tim.getTime(msg="After calculating final spectrum ")
# Write out RMD file
d_som5.attr_list["config"] = config
hlr_utils.write_file(config.output,
"text/rmd",
d_som5,
output_ext="rmd",
data_ext=config.ext_replacement,
path_replacement=config.path_replacement,
verbose=config.verbose,
message="metadata")
if tim is not None:
tim.setOldTime(old_time)
tim.getTime(msg="Total Running Time")
def process_igs_data(datalist, conf, **kwargs):
"""
This function combines Steps 1 through 8 of the data reduction process for
Inverse Geometry Spectrometers as specified by the documents at
U{http://neutrons.ornl.gov/asg/projects/SCL/reqspec/DR_Lib_RS.doc}. The
function takes a list of file names, a L{hlr_utils.Configure} object and
processes the data accordingly. This function should really only be used in
the context of I{amorphous_reduction} and I{calc_norm_eff}.
@param datalist: A list containing the filenames of the data to be
processed.
@type datalist: C{list} of C{string}s
@param conf: Object that contains the current setup of the driver.
@type conf: L{hlr_utils.Configure}
@param kwargs: A list of keyword arguments that the function accepts:
@keyword inst_geom_dst: File object that contains instrument geometry
information.
@type inst_geom_dst: C{DST.GeomDST}
@keyword dataset_type: The practical name of the dataset being processed.
The default value is I{data}.
@type dataset_type: C{string}
@keyword tib_const: Object providing the time-independent background
constant to subtract.
@type tib_const: L{hlr_utils.DrParameter}
@keyword bkg_som: Object that will be used for early background subtraction
@type bkg_som: C{SOM.SOM}
@keyword timer: Timing object so the function can perform timing estimates.
@type timer: C{sns_timer.DiffTime}
@return: Object that has undergone all requested processing steps
@rtype: C{SOM.SOM}
"""
import hlr_utils
# Check keywords
try:
dataset_type = kwargs["dataset_type"]
except KeyError:
dataset_type = "data"
try:
t = kwargs["timer"]
except KeyError:
t = None
try:
if kwargs["tib_const"] is not None:
tib_const = kwargs["tib_const"].toValErrTuple()
else:
tib_const = None
except KeyError:
tib_const = None
try:
i_geom_dst = kwargs["inst_geom_dst"]
except KeyError:
i_geom_dst = None
try:
bkg_som = kwargs["bkg_som"]
except KeyError:
bkg_som = None
# Step 1: Open appropriate data files
if not conf.mc:
so_axis = "time_of_flight"
else:
so_axis = "Time_of_Flight"
# Add so_axis to Configure object
conf.so_axis = so_axis
if conf.verbose:
print "Reading %s file" % dataset_type
# Special case handling for normalization data. Dynamically trying to
# determine if incoming file is a previously calculated one.
if dataset_type == "normalization":
try:
# Check the first incoming file
dst_type = hlr_utils.file_peeker(datalist[0])
# If file_peeker succeeds, the DST is different than the function
# returns
dst_type = "text/num-info"
# Let ROI file handle filtering
data_paths = None
except RuntimeError:
# It's a NeXus file
dst_type = "application/x-NeXus"
data_paths = conf.data_paths.toPath()
else:
dst_type = "application/x-NeXus"
data_paths = conf.data_paths.toPath()
# The [0] is to get the data SOM and ignore the None background SOM
dp_som0 = dr_lib.add_files(datalist,
Data_Paths=data_paths,
SO_Axis=so_axis,
Signal_ROI=conf.roi_file,
dataset_type=dataset_type,
dst_type=dst_type,
Verbose=conf.verbose,
Timer=t)
if t is not None:
t.getTime(msg="After reading %s " % dataset_type)
if dst_type == "text/num-info":
# Since we have a pre-calculated normalization dataset, set the flag
# and return the SOM now
conf.pre_norm = True
# Make the labels and units compatible with a NeXus file based SOM
dp_som0.setAxisLabel(0, "wavelength")
dp_som0.setAxisUnits(0, "Angstroms")
dp_som0.setYUnits("Counts/A")
return dp_som0
else:
if dataset_type == "normalization":
# Since we have a NeXus file, we need to continue
conf.pre_norm = False
# Cut the spectra if necessary
dp_somA = dr_lib.cut_spectra(dp_som0, conf.tof_cut_min, conf.tof_cut_max)
del dp_som0
dp_som1 = dr_lib.fix_bin_contents(dp_somA)
del dp_somA
if conf.inst_geom is not None:
i_geom_dst.setGeometry(conf.data_paths.toPath(), dp_som1)
if conf.no_mon_norm:
dm_som1 = None
else:
if conf.verbose:
print "Reading in monitor data from %s file" % dataset_type
# The [0] is to get the data SOM and ignore the None background SOM
dm_som0 = dr_lib.add_files(datalist,
Data_Paths=conf.mon_path.toPath(),
SO_Axis=so_axis,
dataset_type=dataset_type,
Verbose=conf.verbose,
Timer=t)
if t is not None:
t.getTime(msg="After reading monitor data ")
dm_som1 = dr_lib.fix_bin_contents(dm_som0)
del dm_som0
if conf.inst_geom is not None:
i_geom_dst.setGeometry(conf.mon_path.toPath(), dm_som1)
if bkg_som is not None:
bkg_pcharge = bkg_som.attr_list["background-proton_charge"].getValue()
data_pcharge = dp_som1.attr_list[dataset_type +
"-proton_charge"].getValue()
ratio = data_pcharge / bkg_pcharge
bkg_som1 = common_lib.mult_ncerr(bkg_som, (ratio, 0.0))
del bkg_som
dp_som2 = dr_lib.subtract_bkg_from_data(dp_som1,
bkg_som1,
verbose=conf.verbose,
timer=t,
dataset1=dataset_type,
dataset2="background")
else:
dp_som2 = dp_som1
del dp_som1
# Step 2: Dead Time Correction
# No dead time correction is being applied to the data yet
# Step 3: Time-independent background determination
if conf.verbose and conf.tib_tofs is not None:
print "Determining time-independent background from data"
if t is not None and conf.tib_tofs is not None:
t.getTime(False)
B = dr_lib.determine_time_indep_bkg(dp_som2, conf.tib_tofs)
if t is not None and B is not None:
t.getTime(msg="After determining time-independent background ")
if conf.dump_tib and B is not None:
file_comment = "TOFs: %s" % conf.tib_tofs
hlr_utils.write_file(conf.output, "text/num-info", B,
output_ext="tib",
extra_tag=dataset_type,
verbose=conf.verbose,
data_ext=conf.ext_replacement,
path_replacement=conf.path_replacement,
message="time-independent background "\
+"information",
tag="Average",
units="counts",
comments=[file_comment])
# Step 4: Subtract time-independent background
if conf.verbose and B is not None:
print "Subtracting time-independent background from data"
if t is not None:
t.getTime(False)
if B is not None:
dp_som3 = common_lib.sub_ncerr(dp_som2, B)
else:
dp_som3 = dp_som2
if B is not None and t is not None:
t.getTime(msg="After subtracting time-independent background ")
del dp_som2, B
# Step 5: Subtract time-independent background constant
if conf.verbose and tib_const is not None:
print "Subtracting time-independent background constant from data"
if t is not None and tib_const is not None:
t.getTime(False)
if tib_const is not None:
dp_som4 = common_lib.sub_ncerr(dp_som3, tib_const)
else:
dp_som4 = dp_som3
if t is not None and tib_const is not None:
t.getTime(msg="After subtracting time-independent background "\
+"constant ")
del dp_som3
# Provide override capability for final wavelength, time-zero slope and
# time-zero offset
if conf.wavelength_final is not None:
dp_som4.attr_list["Wavelength_final"] = \
conf.wavelength_final.toValErrTuple()
# Note: time_zero_slope MUST be a tuple
if conf.time_zero_slope is not None:
dp_som4.attr_list["Time_zero_slope"] = \
conf.time_zero_slope.toValErrTuple()
if dm_som1 is not None:
dm_som1.attr_list["Time_zero_slope"] = \
conf.time_zero_slope.toValErrTuple()
# Note: time_zero_offset MUST be a tuple
if conf.time_zero_offset is not None:
dp_som4.attr_list["Time_zero_offset"] = \
conf.time_zero_offset.toValErrTuple()
if dm_som1 is not None:
dm_som1.attr_list["Time_zero_offset"] = \
conf.time_zero_offset.toValErrTuple()
# Step 6: Convert TOF to wavelength for data and monitor
if conf.verbose:
print "Converting TOF to wavelength"
if t is not None:
t.getTime(False)
# Convert monitor
if dm_som1 is not None:
dm_som2 = common_lib.tof_to_wavelength_lin_time_zero(
dm_som1, units="microsecond")
else:
dm_som2 = None
# Convert detector pixels
dp_som5 = common_lib.tof_to_initial_wavelength_igs_lin_time_zero(
dp_som4, units="microsecond", run_filter=conf.filter)
if t is not None:
t.getTime(msg="After converting TOF to wavelength ")
if conf.dump_wave:
hlr_utils.write_file(conf.output,
"text/Spec",
dp_som5,
output_ext="pxl",
extra_tag=dataset_type,
verbose=conf.verbose,
data_ext=conf.ext_replacement,
path_replacement=conf.path_replacement,
message="pixel wavelength information")
if conf.dump_mon_wave and dm_som2 is not None:
hlr_utils.write_file(conf.output,
"text/Spec",
dm_som2,
output_ext="mxl",
extra_tag=dataset_type,
verbose=conf.verbose,
data_ext=conf.ext_replacement,
path_replacement=conf.path_replacement,
message="monitor wavelength information")
del dp_som4, dm_som1
# Step 7: Efficiency correct monitor
if conf.verbose and dm_som2 is not None and not conf.no_mon_effc:
print "Efficiency correct monitor data"
if t is not None:
t.getTime(False)
if not conf.no_mon_effc:
dm_som3 = dr_lib.feff_correct_mon(dm_som2)
else:
dm_som3 = dm_som2
if t is not None and dm_som2 is not None and not conf.no_mon_effc:
t.getTime(msg="After efficiency correcting monitor ")
if conf.dump_mon_effc and not conf.no_mon_effc and dm_som3 is not None:
hlr_utils.write_file(conf.output, "text/Spec", dm_som3,
output_ext="mel",
extra_tag=dataset_type,
verbose=conf.verbose,
data_ext=conf.ext_replacement,
path_replacement=conf.path_replacement,
message="monitor wavelength information "\
+"(efficiency)")
del dm_som2
# Step 8: Rebin monitor axis onto detector pixel axis
if conf.verbose and dm_som3 is not None:
print "Rebin monitor axis to detector pixel axis"
if t is not None:
t.getTime(False)
dm_som4 = dr_lib.rebin_monitor(dm_som3, dp_som5)
if t is not None and dm_som4 is not None:
t.getTime(msg="After rebinning monitor ")
del dm_som3
if conf.dump_mon_rebin and dm_som4 is not None:
hlr_utils.write_file(conf.output, "text/Spec", dm_som4,
output_ext="mrl",
extra_tag=dataset_type,
verbose=conf.verbose,
data_ext=conf.ext_replacement,
path_replacement=conf.path_replacement,
message="monitor wavelength information "\
+"(rebinned)")
# The lambda-dependent background is only done on sample data (aka data)
# for the BSS instrument at the SNS
if conf.inst == "BSS" and conf.ldb_const is not None and \
dataset_type == "data":
# Step 9: Convert chopper center wavelength to TOF center
if conf.verbose:
print "Converting chopper center wavelength to TOF"
if t is not None:
t.getTime(False)
tof_center = dr_lib.convert_single_to_list(\
"initial_wavelength_igs_lin_time_zero_to_tof",
conf.chopper_lambda_cent.toValErrTuple(), dp_som5)
# Step 10: Calculate beginning and end of detector TOF spectrum
if conf.verbose:
print "Calculating beginning and ending TOF ranges"
half_inv_chop_freq = 0.5 / conf.chopper_freq.toValErrTuple()[0]
# Above is in seconds, need microseconds
half_inv_chop_freq *= 1.0e6
tof_begin = common_lib.sub_ncerr(tof_center, (half_inv_chop_freq, 0.0))
tof_end = common_lib.add_ncerr(tof_center, (half_inv_chop_freq, 0.0))
# Step 11: Convert TOF_begin and TOF_end to wavelength
if conf.verbose:
print "Converting TOF_begin and TOF_end to wavelength"
# Check for time-zero slope information
try:
tz_slope = conf.time_zero_slope.toValErrTuple()
except AttributeError:
tz_slope = (0.0, 0.0)
# Check for time-zero offset information
try:
tz_offset = conf.time_zero_offset.toValErrTuple()
except AttributeError:
tz_offset = (0.0, 0.0)
l_begin = common_lib.tof_to_initial_wavelength_igs_lin_time_zero(\
tof_begin, time_zero_slope=tz_slope, time_zero_offset=tz_offset,
iobj=dp_som5, run_filter=False)
l_end = common_lib.tof_to_initial_wavelength_igs_lin_time_zero(\
tof_end, time_zero_slope=tz_slope, time_zero_offset=tz_offset,
iobj=dp_som5, run_filter=False)
# Step 12: tof-least-bkg to lambda-least-bkg
if conf.verbose:
print "Converting TOF least background to wavelength"
lambda_least_bkg = dr_lib.convert_single_to_list(\
"tof_to_initial_wavelength_igs_lin_time_zero",
conf.tof_least_bkg.toValErrTuple(), dp_som5)
if t is not None:
t.getTime(msg="After converting boundary positions ")
# Step 13: Create lambda-dependent background spectrum
if conf.verbose:
print "Creating lambda-dependent background spectra"
if t is not None:
t.getTime(False)
ldb_som = dr_lib.shift_spectrum(dm_som4, lambda_least_bkg, l_begin,
l_end, conf.ldb_const.getValue())
if t is not None:
t.getTime(msg="After creating lambda-dependent background "\
+"spectra ")
# Step 14: Subtract lambda-dependent background from sample data
if conf.verbose:
print "Subtracting lambda-dependent background from data"
if t is not None:
t.getTime(False)
dp_som6 = common_lib.sub_ncerr(dp_som5, ldb_som)
if t is not None:
t.getTime(msg="After subtracting lambda-dependent background "\
+"from data ")
else:
dp_som6 = dp_som5
del dp_som5
# Step 15: Normalize data by monitor
if conf.verbose and dm_som4 is not None:
print "Normalizing data by monitor"
if t is not None:
t.getTime(False)
if dm_som4 is not None:
dp_som7 = common_lib.div_ncerr(dp_som6, dm_som4)
if t is not None:
t.getTime(msg="After normalizing data by monitor ")
else:
dp_som7 = dp_som6
if conf.dump_wave_mnorm:
dp_som7_1 = dr_lib.sum_all_spectra(dp_som7,\
rebin_axis=conf.lambda_bins.toNessiList())
write_message = "combined pixel wavelength information"
if dm_som4 is not None:
write_message += " (monitor normalized)"
hlr_utils.write_file(conf.output,
"text/Spec",
dp_som7_1,
output_ext="pml",
extra_tag=dataset_type,
verbose=conf.verbose,
data_ext=conf.ext_replacement,
path_replacement=conf.path_replacement,
message=write_message)
del dp_som7_1
del dm_som4, dp_som6
return dp_som7
def calibrate_dgs_data(datalist, conf, dkcur, **kwargs):
"""
This function combines Steps 3 through 6 in Section 2.1.1 of the data
reduction process for Direct Geometry Spectrometers as specified by the
document at
U{http://neutrons.ornl.gov/asg/projects/SCL/reqspec/DR_Lib_RS.doc}. The
function takes a list of file names, a L{hlr_utils.Configure} object and
processes the data accordingly.
@param datalist: A list containing the filenames of the data to be
processed.
@type datalist: C{list} of C{string}s
@param conf: Object that contains the current setup of the driver.
@type conf: L{hlr_utils.Configure}
@param dkcur: The object containing the TOF dark current data.
@type dkcur: C{SOM.SOM}
@param kwargs: A list of keyword arguments that the function accepts:
@keyword inst_geom_dst: File object that contains instrument geometry
information.
@type inst_geom_dst: C{DST.GeomDST}
@keyword tib_const: A time-independent background constant to subtract
from every pixel.
@type tib_const: L{hlr_utils.DrParameter}
@keyword dataset_type: The practical name of the dataset being processed.
The default value is I{data}.
@type dataset_type: C{string}
@keyword cwp: A list of chopper phase corrections in units of microseconds.
@type cwp: C{list} of C{float}s
@keyword timer: Timing object so the function can perform timing estimates.
@type timer: C{sns_timer.DiffTime}
@return: Object that has undergone all requested processing steps
@rtype: C{SOM.SOM}
"""
import common_lib
import dr_lib
import hlr_utils
# Check keywords
try:
tib_const = kwargs["tib_const"]
except KeyError:
tib_const = None
try:
dataset_type = kwargs["dataset_type"]
except KeyError:
dataset_type = "data"
try:
t = kwargs["timer"]
except KeyError:
t = None
try:
i_geom_dst = kwargs["inst_geom_dst"]
except KeyError:
i_geom_dst = None
dataset_cwp = kwargs.get("cwp")
# Open the appropriate datafiles
if conf.verbose:
print "Reading %s file" % dataset_type
data_paths = conf.data_paths.toPath()
if conf.no_mon_norm:
mon_paths = None
else:
mon_paths = conf.usmon_path.toPath()
# Check for mask file since normalization drive doesn't understand option
try:
mask_file = conf.mask_file
except AttributeError:
mask_file = None
if t is not None:
oldtime = t.getOldTime()
(dp_som0, dm_som0) = dr_lib.add_files_dm(datalist,
Data_Paths=data_paths,
Mon_Paths=mon_paths,
SO_Axis=conf.so_axis,
Signal_ROI=conf.roi_file,
Signal_MASK=mask_file,
dataset_type=dataset_type,
dataset_cwp=dataset_cwp,
Verbose=conf.verbose,
Timer=t)
if t is not None:
t.setOldTime(oldtime)
t.getTime(msg="After reading %s file" % dataset_type)
# Cut the spectra if necessary
dp_somA = dr_lib.cut_spectra(dp_som0, conf.tof_cut_min, conf.tof_cut_max)
del dp_som0
dp_somB = dr_lib.fix_bin_contents(dp_somA)
del dp_somA
if dp_somB.attr_list.instrument.get_name() != "CNCS":
if conf.verbose:
print "Cutting spectrum at minimum TOF"
if t is not None:
t.getTime(False)
# Calculate minimum TOF for physical neutrons
if conf.initial_energy is not None:
initial_wavelength = common_lib.energy_to_wavelength(\
conf.initial_energy.toValErrTuple())
initial_velocity = common_lib.wavelength_to_velocity(\
initial_wavelength)
else:
# This should actually calculate it, but don't have a way right now
pass
if conf.time_zero_offset is not None:
time_zero_offset = conf.time_zero_offset.toValErrTuple()
else:
# This should actually calculate it, but don't have a way right now
time_zero_offset = (0.0, 0.0)
ss_length = dp_somB.attr_list.instrument.get_primary()
tof_min = (ss_length[0] / initial_velocity[0]) + time_zero_offset[0]
# Cut all spectra a the minimum TOF
dp_som1 = dr_lib.cut_spectra(dp_somB, tof_min, None)
if t is not None:
t.getTime(msg="After cutting spectrum at minimum TOF ")
else:
dp_som1 = dp_somB
del dp_somB
if dm_som0 is not None:
dm_som1 = dr_lib.fix_bin_contents(dm_som0)
else:
dm_som1 = dm_som0
del dm_som0
# Override geometry if necessary
if conf.inst_geom is not None:
i_geom_dst.setGeometry(data_paths, dp_som1)
if conf.inst_geom is not None and dm_som1 is not None:
i_geom_dst.setGeometry(mon_paths, dm_som1)
# Step 3: Integrate the upstream monitor
if dm_som1 is not None:
if conf.verbose:
print "Integrating upstream monitor spectrum"
if t is not None:
t.getTime(False)
if conf.mon_int_range is None:
start_val = float("inf")
end_val = float("inf")
else:
start_val = conf.mon_int_range[0]
end_val = conf.mon_int_range[1]
dm_som2 = dr_lib.integrate_spectra(dm_som1,
start=start_val,
end=end_val,
width=True)
if t is not None:
t.getTime(msg="After integrating upstream monitor spectrum ")
else:
dm_som2 = dm_som1
del dm_som1
tib_norm_const = None
# Step 4: Divide data set by summed monitor spectrum
if dm_som2 is not None:
if conf.verbose:
print "Normalizing %s by monitor sum" % dataset_type
if t is not None:
t.getTime(False)
dp_som2 = common_lib.div_ncerr(dp_som1, dm_som2, length_one_som=True)
tib_norm_const = dm_som2[0].y
if t is not None:
t.getTime(msg="After normalizing %s by monitor sum" % dataset_type)
elif conf.pc_norm:
if conf.verbose:
print "Normalizing %s by proton charge" % dataset_type
pc_tag = dataset_type + "-proton_charge"
pc = dp_som1.attr_list[pc_tag]
# Scale the proton charge and then set the scale PC back to attributes
if conf.scale_pc is not None:
if conf.verbose:
print "Scaling %s proton charge" % dataset_type
pc = hlr_utils.scale_proton_charge(pc, conf.scale_pc)
dp_som1.attr_list[pc_tag] = pc
tib_norm_const = pc.getValue()
if t is not None:
t.getTime(False)
dp_som2 = common_lib.div_ncerr(dp_som1, (pc.getValue(), 0.0))
if t is not None:
t.getTime(msg="After normalizing %s by proton charge" \
% dataset_type)
else:
dp_som2 = dp_som1
del dp_som1, dm_som2
# Step 5: Scale dark current by data set measurement time
if dkcur is not None:
if conf.verbose:
print "Scaling dark current by %s acquisition time" % dataset_type
if t is not None:
t.getTime(False)
dstime_tag = dataset_type + "-duration"
dstime = dp_som2.attr_list[dstime_tag]
dkcur1 = common_lib.div_ncerr(dkcur, (dstime.getValue(), 0.0))
if t is not None:
t.getTime(msg="After scaling dark current by %s acquisition time" \
% dataset_type)
else:
dkcur1 = dkcur
del dkcur
# Step 6: Subtract scaled dark current from data set
if dkcur1 is not None:
if conf.verbose:
print "Subtracting %s by scaled dark current" % dataset_type
if t is not None:
t.getTime(False)
dp_som3 = common_lib.sub_ncerr(dp_som2, dkcur1)
if t is not None:
t.getTime(msg="After subtracting %s by scaled dark current" \
% dataset_type)
elif tib_const is not None and dkcur1 is None:
if conf.verbose:
print "Subtracting TIB constant from %s" % dataset_type
# Normalize the TIB constant by dividing by the current normalization
# the duration (if necessary) and the conversion from seconds to
# microseconds
tib_c = tib_const.toValErrTuple()
conv_sec_to_usec = 1.0e-6
if tib_norm_const is None:
tib_norm_const = 1
duration = 1
else:
duration_tag = dataset_type + "-duration"
duration = dp_som2.attr_list[duration_tag].getValue()
norm_const = (duration * conv_sec_to_usec) / tib_norm_const
tib_val = tib_c[0] * norm_const
tib_err2 = tib_c[1] * (norm_const * norm_const)
if t is not None:
t.getTime(False)
dp_som3 = common_lib.sub_ncerr(dp_som2, (tib_val, tib_err2))
if t is not None:
t.getTime(msg="After subtracting TIB constant from %s" \
% dataset_type)
elif conf.tib_range is not None and dkcur1 is None:
if conf.verbose:
print "Determining TIB constant from %s" % dataset_type
if t is not None:
t.getTime(False)
TIB = dr_lib.determine_time_indep_bkg(dp_som2,
conf.tib_range,
is_range=True)
if t is not None:
t.getTime(msg="After determining TIB constant from %s" \
% dataset_type)
if conf.dump_tib:
file_comment = "TIB TOF Range: [%d, %d]" % (conf.tib_range[0],
conf.tib_range[1])
hlr_utils.write_file(conf.output, "text/num-info", TIB,
output_ext="tib",
extra_tag=dataset_type,
verbose=conf.verbose,
data_ext=conf.ext_replacement,
path_replacement=conf.path_replacement,
message="time-independent background "\
+"information",
tag="Average TIB",
units="counts/usec",
comments=[file_comment])
if conf.verbose:
print "Subtracting TIB constant from %s" % dataset_type
if t is not None:
t.getTime(False)
dp_som3 = common_lib.sub_ncerr(dp_som2, TIB)
if t is not None:
t.getTime(msg="After subtracting TIB constant from %s" \
% dataset_type)
del TIB
else:
dp_som3 = dp_som2
del dp_som2, dkcur1
if conf.dump_ctof_comb:
dp_som3_1 = dr_lib.sum_all_spectra(dp_som3)
hlr_utils.write_file(conf.output,
"text/Spec",
dp_som3_1,
output_ext="ctof",
extra_tag=dataset_type,
data_ext=conf.ext_replacement,
path_replacement=conf.path_replacement,
verbose=conf.verbose,
message="combined calibrated TOF information")
del dp_som3_1
return dp_som3
def process_reflp_data(datalist, conf, roi_file, bkg_roi_file=None,
no_bkg=False, **kwargs):
"""
This function combines Steps 1 through 3 in section 2.4.6.1 of the data
reduction process for Reduction from TOF to lambda_T as specified by
the document at
U{http://neutrons.ornl.gov/asg/projects/SCL/reqspec/DR_Lib_RS.doc}. The
function takes a list of file names, a L{hlr_utils.Configure} object,
region-of-interest (ROI) file for the normalization dataset, a background
region-of-interest (ROI) file and an optional flag about background
subtractionand processes the data accordingly.
@param datalist: The filenames of the data to be processed
@type datalist: C{list} of C{string}s
@param conf: Object that contains the current setup of the driver
@type conf: L{hlr_utils.Configure}
@param roi_file: The file containing the list of pixel IDs for the region
of interest. This only applies to normalization data.
@type roi_file: C{string}
@param bkg_roi_file: The file containing the list of pixel IDs for the
(possible) background region of interest.
@type bkg_roi_file: C{string}
@param no_bkg: (OPTIONAL) Flag which determines if the background will be
calculated and subtracted.
@type no_bkg: C{boolean}
@param kwargs: A list of keyword arguments that the function accepts:
@keyword inst_geom_dst: File object that contains instrument geometry
information.
@type inst_geom_dst: C{DST.GeomDST}
@keyword timer: Timing object so the function can perform timing
estimates.
@type timer: C{sns_timer.DiffTime}
@return: Object that has undergone all requested processing steps
@rtype: C{SOM.SOM}
"""
import hlr_utils
import common_lib
import dr_lib
# Check keywords
try:
i_geom_dst = kwargs["inst_geom_dst"]
except KeyError:
i_geom_dst = None
try:
t = kwargs["timer"]
except KeyError:
t = None
if roi_file is not None:
# Normalization
dataset_type = "norm"
else:
# Sample data
dataset_type = "data"
so_axis = "time_of_flight"
# Step 0: Open data files and select ROI (if necessary)
if conf.verbose:
print "Reading %s file" % dataset_type
if len(conf.norm_data_paths) and dataset_type == "norm":
data_path = conf.norm_data_paths.toPath()
else:
data_path = conf.data_paths.toPath()
(d_som1, b_som1) = dr_lib.add_files_bg(datalist,
Data_Paths=data_path,
SO_Axis=so_axis,
dataset_type=dataset_type,
Signal_ROI=roi_file,
Bkg_ROI=bkg_roi_file,
Verbose=conf.verbose,
Timer=t)
if t is not None:
t.getTime(msg="After reading %s " % dataset_type)
# Override geometry if necessary
if i_geom_dst is not None:
i_geom_dst.setGeometry(conf.data_paths.toPath(), d_som1)
if dataset_type == "data":
# Get TOF bin width
conf.delta_TOF = d_som1[0].axis[0].val[1] - d_som1[0].axis[0].val[0]
if conf.mon_norm:
if conf.verbose:
print "Reading in monitor data from %s file" % dataset_type
# The [0] is to get the data SOM and ignore the None background SOM
dm_som1 = dr_lib.add_files(datalist, Data_Paths=conf.mon_path.toPath(),
SO_Axis=so_axis,
dataset_type=dataset_type,
Verbose=conf.verbose,
Timer=t)
if t is not None:
t.getTime(msg="After reading monitor data ")
else:
dm_som1 = None
# Step 1: Sum all spectra along the low resolution direction
# Set sorting for REF_L
if conf.verbose:
print "Summing over low resolution direction"
# Set sorting
(y_sort,
cent_pixel) = hlr_utils.get_ref_integration_direction(conf.int_dir,
conf.inst,
d_som1.attr_list.instrument)
if t is not None:
t.getTime(False)
d_som2 = dr_lib.sum_all_spectra(d_som1, y_sort=y_sort, stripe=True,
pixel_fix=cent_pixel)
if b_som1 is not None:
b_som2 = dr_lib.sum_all_spectra(b_som1, y_sort=y_sort, stripe=True,
pixel_fix=cent_pixel)
del b_som1
else:
b_som2 = b_som1
if t is not None:
t.getTime(msg="After summing low resolution direction ")
del d_som1
# Determine background spectrum
if conf.verbose and not no_bkg:
print "Determining %s background" % dataset_type
if b_som2 is not None:
B = dr_lib.calculate_ref_background(b_som2, no_bkg, conf.inst, None,
aobj=d_som2)
if t is not None:
t.getTime(msg="After background determination")
# Subtract background spectrum from data spectra
if not no_bkg:
d_som3 = dr_lib.subtract_bkg_from_data(d_som2, B,
verbose=conf.verbose,
timer=t,
dataset1="data",
dataset2="background")
else:
d_som3 = d_som2
del d_som2
# Zero the spectra if necessary
if roi_file is None and (conf.tof_cut_min is not None or \
conf.tof_cut_max is not None):
import utils
# Find the indicies for the non zero range
if conf.tof_cut_min is None:
conf.TOF_min = d_som3[0].axis[0].val[0]
start_index = 0
else:
start_index = utils.bisect_helper(d_som3[0].axis[0].val,
conf.tof_cut_min)
if conf.tof_cut_max is None:
conf.TOF_max = d_som3[0].axis[0].val[-1]
end_index = len(d_som3[0].axis[0].val) - 1
else:
end_index = utils.bisect_helper(d_som3[0].axis[0].val,
conf.tof_cut_max)
nz_list = []
for i in xrange(hlr_utils.get_length(d_som3)):
nz_list.append((start_index, end_index))
d_som4 = dr_lib.zero_spectra(d_som3, nz_list, use_bin_index=True)
else:
conf.TOF_min = d_som3[0].axis[0].val[0]
conf.TOF_max = d_som3[0].axis[0].val[-1]
d_som4 = d_som3
del d_som3
# Step N: Convert TOF to wavelength
if conf.verbose:
print "Converting TOF to wavelength"
if t is not None:
t.getTime(False)
d_som5 = common_lib.tof_to_wavelength(d_som4, inst_param="total",
units="microsecond")
if dm_som1 is not None:
dm_som2 = common_lib.tof_to_wavelength(dm_som1, units="microsecond")
else:
dm_som2 = None
del dm_som1
if t is not None:
t.getTime(msg="After converting TOF to wavelength ")
del d_som4
if conf.mon_norm:
dm_som3 = dr_lib.rebin_monitor(dm_som2, d_som5, rtype="frac")
else:
dm_som3 = None
del dm_som2
if not conf.mon_norm:
# Step 2: Multiply the spectra by the proton charge
if conf.verbose:
print "Multiply spectra by proton charge"
pc_tag = dataset_type + "-proton_charge"
proton_charge = d_som5.attr_list[pc_tag]
if t is not None:
t.getTime(False)
d_som6 = common_lib.div_ncerr(d_som5, (proton_charge.getValue(), 0.0))
if t is not None:
t.getTime(msg="After scaling by proton charge ")
else:
if conf.verbose:
print "Normalize by monitor spectrum"
if t is not None:
t.getTime(False)
d_som6 = common_lib.div_ncerr(d_som5, dm_som3)
if t is not None:
t.getTime(msg="After monitor normalization ")
del d_som5, dm_som3
if roi_file is None:
return d_som6
else:
# Step 3: Make one spectrum for normalization dataset
# Need to create a final rebinning axis
pathlength = d_som6.attr_list.instrument.get_total_path(
det_secondary=True)
delta_lambda = common_lib.tof_to_wavelength((conf.delta_TOF, 0.0),
pathlength=pathlength)
lambda_bins = dr_lib.create_axis_from_data(d_som6,
width=delta_lambda[0])
return dr_lib.sum_by_rebin_frac(d_som6, lambda_bins.toNessiList())
def run(config, tim=None):
"""
This method is where the data reduction process gets done.
@param config: Object containing the data reduction configuration
information.
@type config: L{hlr_utils.Configure}
@param tim: (OPTIONAL) Object that will allow the method to perform
timing evaluations.
@type tim: C{sns_time.DiffTime}
"""
import common_lib
import dr_lib
import DST
if tim is not None:
tim.getTime(False)
old_time = tim.getOldTime()
if config.data is None:
raise RuntimeError("Need to pass a data filename to the driver "\
+"script.")
# Read in geometry if one is provided
if config.inst_geom is not None:
if config.verbose:
print "Reading in instrument geometry file"
inst_geom_dst = DST.getInstance("application/x-NxsGeom",
config.inst_geom)
else:
inst_geom_dst = None
# Perform early background subtraction if the hwfix flag is used
if config.hwfix:
if not config.mc:
so_axis = "time_of_flight"
else:
so_axis = "Time_of_Flight"
bkg_som0 = dr_lib.add_files(config.back,
Data_Paths=config.data_paths.toPath(),
SO_Axis=so_axis,
Signal_ROI=config.roi_file,
dataset_type="background",
Verbose=config.verbose,
Timer=tim)
bkg_som = dr_lib.fix_bin_contents(bkg_som0)
del bkg_som0
else:
bkg_som = None
# Perform Steps 1-15 on sample data
d_som1 = dr_lib.process_igs_data(config.data,
config,
timer=tim,
inst_geom_dst=inst_geom_dst,
tib_const=config.tib_data_const,
bkg_som=bkg_som)
# Perform Steps 1-15 on empty can data
if config.ecan is not None:
e_som1 = dr_lib.process_igs_data(config.ecan,
config,
timer=tim,
inst_geom_dst=inst_geom_dst,
dataset_type="empty_can",
tib_const=config.tib_ecan_const,
bkg_som=bkg_som)
else:
e_som1 = None
# Perform Steps 1-15 on normalization data
if config.norm is not None:
n_som1 = dr_lib.process_igs_data(config.norm,
config,
timer=tim,
inst_geom_dst=inst_geom_dst,
dataset_type="normalization",
tib_const=config.tib_norm_const,
bkg_som=bkg_som)
else:
n_som1 = None
# Perform Steps 1-15 on background data
if config.back is not None:
b_som1 = dr_lib.process_igs_data(config.back,
config,
timer=tim,
inst_geom_dst=inst_geom_dst,
dataset_type="background",
tib_const=config.tib_back_const,
bkg_som=bkg_som)
else:
b_som1 = None
# Perform Step 1-15 on direct scattering background data
if config.dsback is not None:
ds_som1 = dr_lib.process_igs_data(config.dsback,
config,
timer=tim,
inst_geom_dst=inst_geom_dst,
tib_const=config.tib_dsback_const,
dataset_type="dsbackground",
bkg_som=bkg_som)
# Note: time_zero_slope MUST be a tuple
if config.time_zero_slope is not None:
ds_som1.attr_list["Time_zero_slope"] = \
config.time_zero_slope.toValErrTuple()
# Note: time_zero_offset MUST be a tuple
if config.time_zero_offset is not None:
ds_som1.attr_list["Time_zero_offset"] = \
config.time_zero_offset.toValErrTuple()
# Step 16: Linearly interpolate TOF elastic range in direct scattering
# background data
# First convert TOF elastic range to appropriate pixel initial
# wavelengths
if config.verbose:
print "Determining initial wavelength range for elastic line"
if tim is not None:
tim.getTime(False)
if config.tof_elastic is None:
# Units are in microseconds
tof_elastic_range = (140300, 141300)
else:
tof_elastic_range = config.tof_elastic
ctof_elastic_low = dr_lib.convert_single_to_list(\
"tof_to_initial_wavelength_igs_lin_time_zero",
(tof_elastic_range[0], 0.0),
ds_som1)
ctof_elastic_high = dr_lib.convert_single_to_list(\
"tof_to_initial_wavelength_igs_lin_time_zero",
(tof_elastic_range[1], 0.0),
ds_som1)
ctof_elastic_range = [(ctof_elastic_low[i][0], ctof_elastic_high[i][0])
for i in xrange(len(ctof_elastic_low))]
if tim is not None:
tim.getTime(msg="After calculating initial wavelength range for "\
+"elastic line ")
del ctof_elastic_low, ctof_elastic_high
if config.split:
lambda_filter = [(d_som1[i].axis[0].val[0],
d_som1[i].axis[0].val[-1])
for i in xrange(len(d_som1))]
else:
lambda_filter = None
# Now interpolate spectra between TOF elastic range (converted to
# initial wavelength)
if config.verbose:
print "Linearly interpolating direct scattering spectra"
if tim is not None:
tim.getTime(False)
ds_som2 = dr_lib.lin_interpolate_spectra(ds_som1,
ctof_elastic_range,
filter_axis=lambda_filter)
if tim is not None:
tim.getTime(msg="After linearly interpolating direct scattering "\
+"spectra ")
if config.dump_dslin:
ds_som2_1 = dr_lib.sum_all_spectra(ds_som2,\
rebin_axis=config.lambda_bins.toNessiList())
hlr_utils.write_file(config.output,
"text/Spec",
ds_som2_1,
output_ext="lin",
data_ext=config.ext_replacement,
path_replacement=config.path_replacement,
verbose=config.verbose,
message="dsbackground linear interpolation")
del ds_som2_1
del ds_som1
else:
ds_som2 = None
if inst_geom_dst is not None:
inst_geom_dst.release_resource()
# Steps 17-18: Subtract background spectrum from sample spectrum
if config.dsback is None:
back_som = b_som1
bkg_type = "background"
else:
back_som = ds_som2
bkg_type = "dsbackground"
d_som2 = dr_lib.subtract_bkg_from_data(d_som1,
back_som,
verbose=config.verbose,
timer=tim,
dataset1="data",
dataset2=bkg_type,
scale=config.scale_bs)
if config.dsback is not None:
del ds_som2
# Step 19: Zero region outside TOF elastic for background for empty can
if config.dsback is None:
bcs_som = b_som1
cs_som = e_som1
else:
if config.verbose and b_som1 is not None:
print "Zeroing background spectra"
if tim is not None and b_som1 is not None:
tim.getTime(False)
bcs_som = dr_lib.zero_spectra(b_som1, ctof_elastic_range)
if tim is not None and b_som1 is not None:
tim.getTime(msg="After zeroing background spectra")
if config.verbose and e_som1 is not None:
print "Zeroing empty can spectra"
if tim is not None and e_som1 is not None:
tim.getTime(False)
cs_som = dr_lib.zero_spectra(e_som1, ctof_elastic_range)
if tim is not None and e_som1 is not None:
tim.getTime(msg="After zeroing empty can spectra")
del ctof_elastic_range
# Steps 20-21: Subtract background spectrum from empty can spectrum
e_som2 = dr_lib.subtract_bkg_from_data(cs_som,
bcs_som,
verbose=config.verbose,
timer=tim,
dataset1="data-empty_can",
dataset2="background",
scale=config.scale_bcs)
# Steps 22-23: Subtract background spectrum from empty can spectrum for
# normalization
try:
config.pre_norm
except AttributeError:
config.pre_norm = False
if not config.pre_norm:
e_som3 = dr_lib.subtract_bkg_from_data(e_som1,
b_som1,
verbose=config.verbose,
timer=tim,
dataset1="norm-empty_can",
dataset2="background",
scale=config.scale_bcn)
else:
e_som3 = None
# Steps 24-25: Subtract background spectrum from normalization spectrum
if not config.pre_norm:
n_som2 = dr_lib.subtract_bkg_from_data(n_som1,
b_som1,
verbose=config.verbose,
timer=tim,
dataset1="normalization",
dataset2="background",
scale=config.scale_bn)
else:
n_som2 = n_som1
del b_som1, e_som1, bcs_som, cs_som
# Steps 26-27: Subtract empty can spectrum from sample spectrum
d_som3 = dr_lib.subtract_bkg_from_data(d_som2,
e_som2,
verbose=config.verbose,
timer=tim,
dataset1="data",
dataset2="empty_can",
scale=config.scale_cs)
del d_som2, e_som2
# Steps 28-29: Subtract empty can spectrum from normalization spectrum
if not config.pre_norm:
n_som3 = dr_lib.subtract_bkg_from_data(n_som2,
e_som3,
verbose=config.verbose,
timer=tim,
dataset1="normalization",
dataset2="empty_can",
scale=config.scale_cn)
else:
n_som3 = n_som2
del n_som2, e_som3
# Step 30-31: Integrate normalization spectra
if config.verbose and n_som3 is not None and not config.pre_norm:
print "Integrating normalization spectra"
if not config.pre_norm:
norm_int = dr_lib.integrate_spectra(n_som3,
start=config.norm_start,
end=config.norm_end,
norm=True)
else:
norm_int = n_som3
del n_som3
# Step 32: Normalize data by integrated values
if config.verbose and norm_int is not None:
print "Normalizing data by normalization data"
if norm_int is not None:
d_som4 = common_lib.div_ncerr(d_som3, norm_int)
else:
d_som4 = d_som3
if norm_int is not None:
if tim is not None:
tim.getTime(msg="After normalizing data ")
del d_som3, norm_int
if config.dump_norm:
if tim is not None:
tim.getTime(False)
hlr_utils.write_file(config.output,
"text/Spec",
d_som4,
output_ext="wvn",
data_ext=config.ext_replacement,
path_replacement=config.path_replacement,
verbose=config.verbose,
message="wavelength (vanadium norm) information")
if tim is not None:
tim.getTime(msg="After writing wavelength (vanadium norm) info ")
# Steps 33 to end: Creating S(Q,E)
if config.Q_bins is not None:
if config.verbose:
print "Creating 2D spectrum"
if tim is not None:
tim.getTime(False)
d_som5 = dr_lib.create_E_vs_Q_igs(
d_som4,
config.E_bins.toNessiList(),
config.Q_bins.toNessiList(),
so_id="Full Detector",
y_label="counts",
y_units="counts / (ueV * A^-1)",
x_labels=["Q transfer", "energy transfer"],
x_units=["1/Angstroms", "ueV"],
split=config.split,
Q_filter=False,
configure=config)
if tim is not None:
tim.getTime(msg="After creation of final spectrum ")
del d_som4
# Steps 33 to 36: Create S(-cos(polar), E)
elif config.ncospol_bins is not None:
if config.verbose:
print "Convert wavelength to energy transfer"
if tim is not None:
tim.getTime(False)
d_som4a = dr_lib.energy_transfer(d_som4,
"IGS",
"Wavelength_final",
sa_norm=True,
scale=True,
change_units=True)
if tim is not None:
tim.getTime(msg="After wavelength to energy transfer conversion ")
del d_som4
if config.verbose:
print "Creating 2D spectrum"
if tim is not None:
tim.getTime(False)
d_som5 = dr_lib.create_param_vs_Y(
d_som4a,
"polar",
"negcos_param_array",
config.ncospol_bins.toNessiList(),
rebin_axis=config.E_bins.toNessiList(),
y_label="counts",
y_units="counts / ueV",
x_labels=["-cos(polar)", "Energy Transfer"],
x_units=["", "ueV"])
if tim is not None:
tim.getTime(msg="After creation of final spectrum ")
# If rescaling factor present, rescale the data
if config.rescale_final is not None and not config.split:
d_som6 = common_lib.mult_ncerr(d_som5, (config.rescale_final, 0.0))
else:
d_som6 = d_som5
if tim is None:
old_time = None
if not __name__ == "amorphous_reduction_sqe":
del d_som5
__write_output(d_som6, config, tim, old_time)
else:
if config.create_output:
del d_som5
__write_output(d_som6, config, tim, old_time)
else:
return d_som6
def process_igs_data(datalist, conf, **kwargs):
"""
This function combines Steps 1 through 8 of the data reduction process for
Inverse Geometry Spectrometers as specified by the documents at
U{http://neutrons.ornl.gov/asg/projects/SCL/reqspec/DR_Lib_RS.doc}. The
function takes a list of file names, a L{hlr_utils.Configure} object and
processes the data accordingly. This function should really only be used in
the context of I{amorphous_reduction} and I{calc_norm_eff}.
@param datalist: A list containing the filenames of the data to be
processed.
@type datalist: C{list} of C{string}s
@param conf: Object that contains the current setup of the driver.
@type conf: L{hlr_utils.Configure}
@param kwargs: A list of keyword arguments that the function accepts:
@keyword inst_geom_dst: File object that contains instrument geometry
information.
@type inst_geom_dst: C{DST.GeomDST}
@keyword dataset_type: The practical name of the dataset being processed.
The default value is I{data}.
@type dataset_type: C{string}
@keyword tib_const: Object providing the time-independent background
constant to subtract.
@type tib_const: L{hlr_utils.DrParameter}
@keyword bkg_som: Object that will be used for early background subtraction
@type bkg_som: C{SOM.SOM}
@keyword timer: Timing object so the function can perform timing estimates.
@type timer: C{sns_timer.DiffTime}
@return: Object that has undergone all requested processing steps
@rtype: C{SOM.SOM}
"""
import hlr_utils
# Check keywords
try:
dataset_type = kwargs["dataset_type"]
except KeyError:
dataset_type = "data"
try:
t = kwargs["timer"]
except KeyError:
t = None
try:
if kwargs["tib_const"] is not None:
tib_const = kwargs["tib_const"].toValErrTuple()
else:
tib_const = None
except KeyError:
tib_const = None
try:
i_geom_dst = kwargs["inst_geom_dst"]
except KeyError:
i_geom_dst = None
try:
bkg_som = kwargs["bkg_som"]
except KeyError:
bkg_som = None
# Step 1: Open appropriate data files
if not conf.mc:
so_axis = "time_of_flight"
else:
so_axis = "Time_of_Flight"
# Add so_axis to Configure object
conf.so_axis = so_axis
if conf.verbose:
print "Reading %s file" % dataset_type
# Special case handling for normalization data. Dynamically trying to
# determine if incoming file is a previously calculated one.
if dataset_type == "normalization":
try:
# Check the first incoming file
dst_type = hlr_utils.file_peeker(datalist[0])
# If file_peeker succeeds, the DST is different than the function
# returns
dst_type = "text/num-info"
# Let ROI file handle filtering
data_paths = None
except RuntimeError:
# It's a NeXus file
dst_type = "application/x-NeXus"
data_paths = conf.data_paths.toPath()
else:
dst_type = "application/x-NeXus"
data_paths = conf.data_paths.toPath()
# The [0] is to get the data SOM and ignore the None background SOM
dp_som0 = dr_lib.add_files(
datalist,
Data_Paths=data_paths,
SO_Axis=so_axis,
Signal_ROI=conf.roi_file,
dataset_type=dataset_type,
dst_type=dst_type,
Verbose=conf.verbose,
Timer=t,
)
if t is not None:
t.getTime(msg="After reading %s " % dataset_type)
if dst_type == "text/num-info":
# Since we have a pre-calculated normalization dataset, set the flag
# and return the SOM now
conf.pre_norm = True
# Make the labels and units compatible with a NeXus file based SOM
dp_som0.setAxisLabel(0, "wavelength")
dp_som0.setAxisUnits(0, "Angstroms")
dp_som0.setYUnits("Counts/A")
return dp_som0
else:
if dataset_type == "normalization":
# Since we have a NeXus file, we need to continue
conf.pre_norm = False
# Cut the spectra if necessary
dp_somA = dr_lib.cut_spectra(dp_som0, conf.tof_cut_min, conf.tof_cut_max)
del dp_som0
dp_som1 = dr_lib.fix_bin_contents(dp_somA)
del dp_somA
if conf.inst_geom is not None:
i_geom_dst.setGeometry(conf.data_paths.toPath(), dp_som1)
if conf.no_mon_norm:
dm_som1 = None
else:
if conf.verbose:
print "Reading in monitor data from %s file" % dataset_type
# The [0] is to get the data SOM and ignore the None background SOM
dm_som0 = dr_lib.add_files(
datalist,
Data_Paths=conf.mon_path.toPath(),
SO_Axis=so_axis,
dataset_type=dataset_type,
Verbose=conf.verbose,
Timer=t,
)
if t is not None:
t.getTime(msg="After reading monitor data ")
dm_som1 = dr_lib.fix_bin_contents(dm_som0)
del dm_som0
if conf.inst_geom is not None:
i_geom_dst.setGeometry(conf.mon_path.toPath(), dm_som1)
if bkg_som is not None:
bkg_pcharge = bkg_som.attr_list["background-proton_charge"].getValue()
data_pcharge = dp_som1.attr_list[dataset_type + "-proton_charge"].getValue()
ratio = data_pcharge / bkg_pcharge
bkg_som1 = common_lib.mult_ncerr(bkg_som, (ratio, 0.0))
del bkg_som
dp_som2 = dr_lib.subtract_bkg_from_data(
dp_som1, bkg_som1, verbose=conf.verbose, timer=t, dataset1=dataset_type, dataset2="background"
)
else:
dp_som2 = dp_som1
del dp_som1
# Step 2: Dead Time Correction
# No dead time correction is being applied to the data yet
# Step 3: Time-independent background determination
if conf.verbose and conf.tib_tofs is not None:
print "Determining time-independent background from data"
if t is not None and conf.tib_tofs is not None:
t.getTime(False)
B = dr_lib.determine_time_indep_bkg(dp_som2, conf.tib_tofs)
if t is not None and B is not None:
t.getTime(msg="After determining time-independent background ")
if conf.dump_tib and B is not None:
file_comment = "TOFs: %s" % conf.tib_tofs
hlr_utils.write_file(
conf.output,
"text/num-info",
B,
output_ext="tib",
extra_tag=dataset_type,
verbose=conf.verbose,
data_ext=conf.ext_replacement,
path_replacement=conf.path_replacement,
message="time-independent background " + "information",
tag="Average",
units="counts",
comments=[file_comment],
)
# Step 4: Subtract time-independent background
if conf.verbose and B is not None:
print "Subtracting time-independent background from data"
if t is not None:
t.getTime(False)
if B is not None:
dp_som3 = common_lib.sub_ncerr(dp_som2, B)
else:
dp_som3 = dp_som2
if B is not None and t is not None:
t.getTime(msg="After subtracting time-independent background ")
del dp_som2, B
# Step 5: Subtract time-independent background constant
if conf.verbose and tib_const is not None:
print "Subtracting time-independent background constant from data"
if t is not None and tib_const is not None:
t.getTime(False)
if tib_const is not None:
dp_som4 = common_lib.sub_ncerr(dp_som3, tib_const)
else:
dp_som4 = dp_som3
if t is not None and tib_const is not None:
t.getTime(msg="After subtracting time-independent background " + "constant ")
del dp_som3
# Provide override capability for final wavelength, time-zero slope and
# time-zero offset
if conf.wavelength_final is not None:
dp_som4.attr_list["Wavelength_final"] = conf.wavelength_final.toValErrTuple()
# Note: time_zero_slope MUST be a tuple
if conf.time_zero_slope is not None:
dp_som4.attr_list["Time_zero_slope"] = conf.time_zero_slope.toValErrTuple()
if dm_som1 is not None:
dm_som1.attr_list["Time_zero_slope"] = conf.time_zero_slope.toValErrTuple()
# Note: time_zero_offset MUST be a tuple
if conf.time_zero_offset is not None:
dp_som4.attr_list["Time_zero_offset"] = conf.time_zero_offset.toValErrTuple()
if dm_som1 is not None:
dm_som1.attr_list["Time_zero_offset"] = conf.time_zero_offset.toValErrTuple()
# Step 6: Convert TOF to wavelength for data and monitor
if conf.verbose:
print "Converting TOF to wavelength"
if t is not None:
t.getTime(False)
# Convert monitor
if dm_som1 is not None:
dm_som2 = common_lib.tof_to_wavelength_lin_time_zero(dm_som1, units="microsecond")
else:
dm_som2 = None
# Convert detector pixels
dp_som5 = common_lib.tof_to_initial_wavelength_igs_lin_time_zero(
dp_som4, units="microsecond", run_filter=conf.filter
)
if t is not None:
t.getTime(msg="After converting TOF to wavelength ")
if conf.dump_wave:
hlr_utils.write_file(
conf.output,
"text/Spec",
dp_som5,
output_ext="pxl",
extra_tag=dataset_type,
verbose=conf.verbose,
data_ext=conf.ext_replacement,
path_replacement=conf.path_replacement,
message="pixel wavelength information",
)
if conf.dump_mon_wave and dm_som2 is not None:
hlr_utils.write_file(
conf.output,
"text/Spec",
dm_som2,
output_ext="mxl",
extra_tag=dataset_type,
verbose=conf.verbose,
data_ext=conf.ext_replacement,
path_replacement=conf.path_replacement,
message="monitor wavelength information",
)
del dp_som4, dm_som1
# Step 7: Efficiency correct monitor
if conf.verbose and dm_som2 is not None and not conf.no_mon_effc:
print "Efficiency correct monitor data"
if t is not None:
t.getTime(False)
if not conf.no_mon_effc:
dm_som3 = dr_lib.feff_correct_mon(dm_som2)
else:
dm_som3 = dm_som2
if t is not None and dm_som2 is not None and not conf.no_mon_effc:
t.getTime(msg="After efficiency correcting monitor ")
if conf.dump_mon_effc and not conf.no_mon_effc and dm_som3 is not None:
hlr_utils.write_file(
conf.output,
"text/Spec",
dm_som3,
output_ext="mel",
extra_tag=dataset_type,
verbose=conf.verbose,
data_ext=conf.ext_replacement,
path_replacement=conf.path_replacement,
message="monitor wavelength information " + "(efficiency)",
)
del dm_som2
# Step 8: Rebin monitor axis onto detector pixel axis
if conf.verbose and dm_som3 is not None:
print "Rebin monitor axis to detector pixel axis"
if t is not None:
t.getTime(False)
dm_som4 = dr_lib.rebin_monitor(dm_som3, dp_som5)
if t is not None and dm_som4 is not None:
t.getTime(msg="After rebinning monitor ")
del dm_som3
if conf.dump_mon_rebin and dm_som4 is not None:
hlr_utils.write_file(
conf.output,
"text/Spec",
dm_som4,
output_ext="mrl",
extra_tag=dataset_type,
verbose=conf.verbose,
data_ext=conf.ext_replacement,
path_replacement=conf.path_replacement,
message="monitor wavelength information " + "(rebinned)",
)
# The lambda-dependent background is only done on sample data (aka data)
# for the BSS instrument at the SNS
if conf.inst == "BSS" and conf.ldb_const is not None and dataset_type == "data":
# Step 9: Convert chopper center wavelength to TOF center
if conf.verbose:
print "Converting chopper center wavelength to TOF"
if t is not None:
t.getTime(False)
tof_center = dr_lib.convert_single_to_list(
"initial_wavelength_igs_lin_time_zero_to_tof", conf.chopper_lambda_cent.toValErrTuple(), dp_som5
)
# Step 10: Calculate beginning and end of detector TOF spectrum
if conf.verbose:
print "Calculating beginning and ending TOF ranges"
half_inv_chop_freq = 0.5 / conf.chopper_freq.toValErrTuple()[0]
# Above is in seconds, need microseconds
half_inv_chop_freq *= 1.0e6
tof_begin = common_lib.sub_ncerr(tof_center, (half_inv_chop_freq, 0.0))
tof_end = common_lib.add_ncerr(tof_center, (half_inv_chop_freq, 0.0))
# Step 11: Convert TOF_begin and TOF_end to wavelength
if conf.verbose:
print "Converting TOF_begin and TOF_end to wavelength"
# Check for time-zero slope information
try:
tz_slope = conf.time_zero_slope.toValErrTuple()
except AttributeError:
tz_slope = (0.0, 0.0)
# Check for time-zero offset information
try:
tz_offset = conf.time_zero_offset.toValErrTuple()
except AttributeError:
tz_offset = (0.0, 0.0)
l_begin = common_lib.tof_to_initial_wavelength_igs_lin_time_zero(
tof_begin, time_zero_slope=tz_slope, time_zero_offset=tz_offset, iobj=dp_som5, run_filter=False
)
l_end = common_lib.tof_to_initial_wavelength_igs_lin_time_zero(
tof_end, time_zero_slope=tz_slope, time_zero_offset=tz_offset, iobj=dp_som5, run_filter=False
)
# Step 12: tof-least-bkg to lambda-least-bkg
if conf.verbose:
print "Converting TOF least background to wavelength"
lambda_least_bkg = dr_lib.convert_single_to_list(
"tof_to_initial_wavelength_igs_lin_time_zero", conf.tof_least_bkg.toValErrTuple(), dp_som5
)
if t is not None:
t.getTime(msg="After converting boundary positions ")
# Step 13: Create lambda-dependent background spectrum
if conf.verbose:
print "Creating lambda-dependent background spectra"
if t is not None:
t.getTime(False)
ldb_som = dr_lib.shift_spectrum(dm_som4, lambda_least_bkg, l_begin, l_end, conf.ldb_const.getValue())
if t is not None:
t.getTime(msg="After creating lambda-dependent background " + "spectra ")
# Step 14: Subtract lambda-dependent background from sample data
if conf.verbose:
print "Subtracting lambda-dependent background from data"
if t is not None:
t.getTime(False)
dp_som6 = common_lib.sub_ncerr(dp_som5, ldb_som)
if t is not None:
t.getTime(msg="After subtracting lambda-dependent background " + "from data ")
else:
dp_som6 = dp_som5
del dp_som5
# Step 15: Normalize data by monitor
if conf.verbose and dm_som4 is not None:
print "Normalizing data by monitor"
if t is not None:
t.getTime(False)
if dm_som4 is not None:
dp_som7 = common_lib.div_ncerr(dp_som6, dm_som4)
if t is not None:
t.getTime(msg="After normalizing data by monitor ")
else:
dp_som7 = dp_som6
if conf.dump_wave_mnorm:
dp_som7_1 = dr_lib.sum_all_spectra(dp_som7, rebin_axis=conf.lambda_bins.toNessiList())
write_message = "combined pixel wavelength information"
if dm_som4 is not None:
write_message += " (monitor normalized)"
hlr_utils.write_file(
conf.output,
"text/Spec",
dp_som7_1,
output_ext="pml",
extra_tag=dataset_type,
verbose=conf.verbose,
data_ext=conf.ext_replacement,
path_replacement=conf.path_replacement,
message=write_message,
)
del dp_som7_1
del dm_som4, dp_som6
return dp_som7
def process_reflp_data(datalist,
conf,
roi_file,
bkg_roi_file=None,
no_bkg=False,
**kwargs):
"""
This function combines Steps 1 through 3 in section 2.4.6.1 of the data
reduction process for Reduction from TOF to lambda_T as specified by
the document at
U{http://neutrons.ornl.gov/asg/projects/SCL/reqspec/DR_Lib_RS.doc}. The
function takes a list of file names, a L{hlr_utils.Configure} object,
region-of-interest (ROI) file for the normalization dataset, a background
region-of-interest (ROI) file and an optional flag about background
subtractionand processes the data accordingly.
@param datalist: The filenames of the data to be processed
@type datalist: C{list} of C{string}s
@param conf: Object that contains the current setup of the driver
@type conf: L{hlr_utils.Configure}
@param roi_file: The file containing the list of pixel IDs for the region
of interest. This only applies to normalization data.
@type roi_file: C{string}
@param bkg_roi_file: The file containing the list of pixel IDs for the
(possible) background region of interest.
@type bkg_roi_file: C{string}
@param no_bkg: (OPTIONAL) Flag which determines if the background will be
calculated and subtracted.
@type no_bkg: C{boolean}
@param kwargs: A list of keyword arguments that the function accepts:
@keyword inst_geom_dst: File object that contains instrument geometry
information.
@type inst_geom_dst: C{DST.GeomDST}
@keyword timer: Timing object so the function can perform timing
estimates.
@type timer: C{sns_timer.DiffTime}
@return: Object that has undergone all requested processing steps
@rtype: C{SOM.SOM}
"""
import hlr_utils
import common_lib
import dr_lib
# Check keywords
try:
i_geom_dst = kwargs["inst_geom_dst"]
except KeyError:
i_geom_dst = None
try:
t = kwargs["timer"]
except KeyError:
t = None
if roi_file is not None:
# Normalization
dataset_type = "norm"
else:
# Sample data
dataset_type = "data"
so_axis = "time_of_flight"
# Step 0: Open data files and select ROI (if necessary)
if conf.verbose:
print "Reading %s file" % dataset_type
if len(conf.norm_data_paths) and dataset_type == "norm":
data_path = conf.norm_data_paths.toPath()
else:
data_path = conf.data_paths.toPath()
(d_som1, b_som1) = dr_lib.add_files_bg(datalist,
Data_Paths=data_path,
SO_Axis=so_axis,
dataset_type=dataset_type,
Signal_ROI=roi_file,
Bkg_ROI=bkg_roi_file,
Verbose=conf.verbose,
Timer=t)
if t is not None:
t.getTime(msg="After reading %s " % dataset_type)
# Override geometry if necessary
if i_geom_dst is not None:
i_geom_dst.setGeometry(conf.data_paths.toPath(), d_som1)
if dataset_type == "data":
# Get TOF bin width
conf.delta_TOF = d_som1[0].axis[0].val[1] - d_som1[0].axis[0].val[0]
if conf.mon_norm:
if conf.verbose:
print "Reading in monitor data from %s file" % dataset_type
# The [0] is to get the data SOM and ignore the None background SOM
dm_som1 = dr_lib.add_files(datalist,
Data_Paths=conf.mon_path.toPath(),
SO_Axis=so_axis,
dataset_type=dataset_type,
Verbose=conf.verbose,
Timer=t)
if t is not None:
t.getTime(msg="After reading monitor data ")
else:
dm_som1 = None
# Step 1: Sum all spectra along the low resolution direction
# Set sorting for REF_L
if conf.verbose:
print "Summing over low resolution direction"
# Set sorting
(y_sort, cent_pixel) = hlr_utils.get_ref_integration_direction(
conf.int_dir, conf.inst, d_som1.attr_list.instrument)
if t is not None:
t.getTime(False)
d_som2 = dr_lib.sum_all_spectra(d_som1,
y_sort=y_sort,
stripe=True,
pixel_fix=cent_pixel)
if b_som1 is not None:
b_som2 = dr_lib.sum_all_spectra(b_som1,
y_sort=y_sort,
stripe=True,
pixel_fix=cent_pixel)
del b_som1
else:
b_som2 = b_som1
if t is not None:
t.getTime(msg="After summing low resolution direction ")
del d_som1
# Determine background spectrum
if conf.verbose and not no_bkg:
print "Determining %s background" % dataset_type
if b_som2 is not None:
B = dr_lib.calculate_ref_background(b_som2,
no_bkg,
conf.inst,
None,
aobj=d_som2)
if t is not None:
t.getTime(msg="After background determination")
# Subtract background spectrum from data spectra
if not no_bkg:
d_som3 = dr_lib.subtract_bkg_from_data(d_som2,
B,
verbose=conf.verbose,
timer=t,
dataset1="data",
dataset2="background")
else:
d_som3 = d_som2
del d_som2
# Zero the spectra if necessary
if roi_file is None and (conf.tof_cut_min is not None or \
conf.tof_cut_max is not None):
import utils
# Find the indicies for the non zero range
if conf.tof_cut_min is None:
conf.TOF_min = d_som3[0].axis[0].val[0]
start_index = 0
else:
start_index = utils.bisect_helper(d_som3[0].axis[0].val,
conf.tof_cut_min)
if conf.tof_cut_max is None:
conf.TOF_max = d_som3[0].axis[0].val[-1]
end_index = len(d_som3[0].axis[0].val) - 1
else:
end_index = utils.bisect_helper(d_som3[0].axis[0].val,
conf.tof_cut_max)
nz_list = []
for i in xrange(hlr_utils.get_length(d_som3)):
nz_list.append((start_index, end_index))
d_som4 = dr_lib.zero_spectra(d_som3, nz_list, use_bin_index=True)
else:
conf.TOF_min = d_som3[0].axis[0].val[0]
conf.TOF_max = d_som3[0].axis[0].val[-1]
d_som4 = d_som3
del d_som3
# Step N: Convert TOF to wavelength
if conf.verbose:
print "Converting TOF to wavelength"
if t is not None:
t.getTime(False)
d_som5 = common_lib.tof_to_wavelength(d_som4,
inst_param="total",
units="microsecond")
if dm_som1 is not None:
dm_som2 = common_lib.tof_to_wavelength(dm_som1, units="microsecond")
else:
dm_som2 = None
del dm_som1
if t is not None:
t.getTime(msg="After converting TOF to wavelength ")
del d_som4
if conf.mon_norm:
dm_som3 = dr_lib.rebin_monitor(dm_som2, d_som5, rtype="frac")
else:
dm_som3 = None
del dm_som2
if not conf.mon_norm:
# Step 2: Multiply the spectra by the proton charge
if conf.verbose:
print "Multiply spectra by proton charge"
pc_tag = dataset_type + "-proton_charge"
proton_charge = d_som5.attr_list[pc_tag]
if t is not None:
t.getTime(False)
d_som6 = common_lib.div_ncerr(d_som5, (proton_charge.getValue(), 0.0))
if t is not None:
t.getTime(msg="After scaling by proton charge ")
else:
if conf.verbose:
print "Normalize by monitor spectrum"
if t is not None:
t.getTime(False)
d_som6 = common_lib.div_ncerr(d_som5, dm_som3)
if t is not None:
t.getTime(msg="After monitor normalization ")
del d_som5, dm_som3
if roi_file is None:
return d_som6
else:
# Step 3: Make one spectrum for normalization dataset
# Need to create a final rebinning axis
pathlength = d_som6.attr_list.instrument.get_total_path(
det_secondary=True)
delta_lambda = common_lib.tof_to_wavelength((conf.delta_TOF, 0.0),
pathlength=pathlength)
lambda_bins = dr_lib.create_axis_from_data(d_som6,
width=delta_lambda[0])
return dr_lib.sum_by_rebin_frac(d_som6, lambda_bins.toNessiList())
def calibrate_dgs_data(datalist, conf, dkcur, **kwargs):
"""
This function combines Steps 3 through 6 in Section 2.1.1 of the data
reduction process for Direct Geometry Spectrometers as specified by the
document at
U{http://neutrons.ornl.gov/asg/projects/SCL/reqspec/DR_Lib_RS.doc}. The
function takes a list of file names, a L{hlr_utils.Configure} object and
processes the data accordingly.
@param datalist: A list containing the filenames of the data to be
processed.
@type datalist: C{list} of C{string}s
@param conf: Object that contains the current setup of the driver.
@type conf: L{hlr_utils.Configure}
@param dkcur: The object containing the TOF dark current data.
@type dkcur: C{SOM.SOM}
@param kwargs: A list of keyword arguments that the function accepts:
@keyword inst_geom_dst: File object that contains instrument geometry
information.
@type inst_geom_dst: C{DST.GeomDST}
@keyword tib_const: A time-independent background constant to subtract
from every pixel.
@type tib_const: L{hlr_utils.DrParameter}
@keyword dataset_type: The practical name of the dataset being processed.
The default value is I{data}.
@type dataset_type: C{string}
@keyword cwp: A list of chopper phase corrections in units of microseconds.
@type cwp: C{list} of C{float}s
@keyword timer: Timing object so the function can perform timing estimates.
@type timer: C{sns_timer.DiffTime}
@return: Object that has undergone all requested processing steps
@rtype: C{SOM.SOM}
"""
import common_lib
import dr_lib
import hlr_utils
# Check keywords
try:
tib_const = kwargs["tib_const"]
except KeyError:
tib_const = None
try:
dataset_type = kwargs["dataset_type"]
except KeyError:
dataset_type = "data"
try:
t = kwargs["timer"]
except KeyError:
t = None
try:
i_geom_dst = kwargs["inst_geom_dst"]
except KeyError:
i_geom_dst = None
dataset_cwp = kwargs.get("cwp")
# Open the appropriate datafiles
if conf.verbose:
print "Reading %s file" % dataset_type
data_paths = conf.data_paths.toPath()
if conf.no_mon_norm:
mon_paths = None
else:
mon_paths = conf.usmon_path.toPath()
# Check for mask file since normalization drive doesn't understand option
try:
mask_file = conf.mask_file
except AttributeError:
mask_file = None
if t is not None:
oldtime = t.getOldTime()
(dp_som0, dm_som0) = dr_lib.add_files_dm(datalist, Data_Paths=data_paths,
Mon_Paths=mon_paths,
SO_Axis=conf.so_axis,
Signal_ROI=conf.roi_file,
Signal_MASK=mask_file,
dataset_type=dataset_type,
dataset_cwp=dataset_cwp,
Verbose=conf.verbose, Timer=t)
if t is not None:
t.setOldTime(oldtime)
t.getTime(msg="After reading %s file" % dataset_type)
# Cut the spectra if necessary
dp_somA = dr_lib.cut_spectra(dp_som0, conf.tof_cut_min, conf.tof_cut_max)
del dp_som0
dp_somB = dr_lib.fix_bin_contents(dp_somA)
del dp_somA
if dp_somB.attr_list.instrument.get_name() != "CNCS":
if conf.verbose:
print "Cutting spectrum at minimum TOF"
if t is not None:
t.getTime(False)
# Calculate minimum TOF for physical neutrons
if conf.initial_energy is not None:
initial_wavelength = common_lib.energy_to_wavelength(\
conf.initial_energy.toValErrTuple())
initial_velocity = common_lib.wavelength_to_velocity(\
initial_wavelength)
else:
# This should actually calculate it, but don't have a way right now
pass
if conf.time_zero_offset is not None:
time_zero_offset = conf.time_zero_offset.toValErrTuple()
else:
# This should actually calculate it, but don't have a way right now
time_zero_offset = (0.0, 0.0)
ss_length = dp_somB.attr_list.instrument.get_primary()
tof_min = (ss_length[0] / initial_velocity[0]) + time_zero_offset[0]
# Cut all spectra a the minimum TOF
dp_som1 = dr_lib.cut_spectra(dp_somB, tof_min, None)
if t is not None:
t.getTime(msg="After cutting spectrum at minimum TOF ")
else:
dp_som1 = dp_somB
del dp_somB
if dm_som0 is not None:
dm_som1 = dr_lib.fix_bin_contents(dm_som0)
else:
dm_som1 = dm_som0
del dm_som0
# Override geometry if necessary
if conf.inst_geom is not None:
i_geom_dst.setGeometry(data_paths, dp_som1)
if conf.inst_geom is not None and dm_som1 is not None:
i_geom_dst.setGeometry(mon_paths, dm_som1)
# Step 3: Integrate the upstream monitor
if dm_som1 is not None:
if conf.verbose:
print "Integrating upstream monitor spectrum"
if t is not None:
t.getTime(False)
if conf.mon_int_range is None:
start_val = float("inf")
end_val = float("inf")
else:
start_val = conf.mon_int_range[0]
end_val = conf.mon_int_range[1]
dm_som2 = dr_lib.integrate_spectra(dm_som1, start=start_val,
end=end_val,
width=True)
if t is not None:
t.getTime(msg="After integrating upstream monitor spectrum ")
else:
dm_som2 = dm_som1
del dm_som1
tib_norm_const = None
# Step 4: Divide data set by summed monitor spectrum
if dm_som2 is not None:
if conf.verbose:
print "Normalizing %s by monitor sum" % dataset_type
if t is not None:
t.getTime(False)
dp_som2 = common_lib.div_ncerr(dp_som1, dm_som2, length_one_som=True)
tib_norm_const = dm_som2[0].y
if t is not None:
t.getTime(msg="After normalizing %s by monitor sum" % dataset_type)
elif conf.pc_norm:
if conf.verbose:
print "Normalizing %s by proton charge" % dataset_type
pc_tag = dataset_type+"-proton_charge"
pc = dp_som1.attr_list[pc_tag]
# Scale the proton charge and then set the scale PC back to attributes
if conf.scale_pc is not None:
if conf.verbose:
print "Scaling %s proton charge" % dataset_type
pc = hlr_utils.scale_proton_charge(pc, conf.scale_pc)
dp_som1.attr_list[pc_tag] = pc
tib_norm_const = pc.getValue()
if t is not None:
t.getTime(False)
dp_som2 = common_lib.div_ncerr(dp_som1, (pc.getValue(), 0.0))
if t is not None:
t.getTime(msg="After normalizing %s by proton charge" \
% dataset_type)
else:
dp_som2 = dp_som1
del dp_som1, dm_som2
# Step 5: Scale dark current by data set measurement time
if dkcur is not None:
if conf.verbose:
print "Scaling dark current by %s acquisition time" % dataset_type
if t is not None:
t.getTime(False)
dstime_tag = dataset_type+"-duration"
dstime = dp_som2.attr_list[dstime_tag]
dkcur1 = common_lib.div_ncerr(dkcur, (dstime.getValue(), 0.0))
if t is not None:
t.getTime(msg="After scaling dark current by %s acquisition time" \
% dataset_type)
else:
dkcur1 = dkcur
del dkcur
# Step 6: Subtract scaled dark current from data set
if dkcur1 is not None:
if conf.verbose:
print "Subtracting %s by scaled dark current" % dataset_type
if t is not None:
t.getTime(False)
dp_som3 = common_lib.sub_ncerr(dp_som2, dkcur1)
if t is not None:
t.getTime(msg="After subtracting %s by scaled dark current" \
% dataset_type)
elif tib_const is not None and dkcur1 is None:
if conf.verbose:
print "Subtracting TIB constant from %s" % dataset_type
# Normalize the TIB constant by dividing by the current normalization
# the duration (if necessary) and the conversion from seconds to
# microseconds
tib_c = tib_const.toValErrTuple()
conv_sec_to_usec = 1.0e-6
if tib_norm_const is None:
tib_norm_const = 1
duration = 1
else:
duration_tag = dataset_type+"-duration"
duration = dp_som2.attr_list[duration_tag].getValue()
norm_const = (duration * conv_sec_to_usec) / tib_norm_const
tib_val = tib_c[0] * norm_const
tib_err2 = tib_c[1] * (norm_const * norm_const)
if t is not None:
t.getTime(False)
dp_som3 = common_lib.sub_ncerr(dp_som2, (tib_val, tib_err2))
if t is not None:
t.getTime(msg="After subtracting TIB constant from %s" \
% dataset_type)
elif conf.tib_range is not None and dkcur1 is None:
if conf.verbose:
print "Determining TIB constant from %s" % dataset_type
if t is not None:
t.getTime(False)
TIB = dr_lib.determine_time_indep_bkg(dp_som2, conf.tib_range,
is_range=True)
if t is not None:
t.getTime(msg="After determining TIB constant from %s" \
% dataset_type)
if conf.dump_tib:
file_comment = "TIB TOF Range: [%d, %d]" % (conf.tib_range[0],
conf.tib_range[1])
hlr_utils.write_file(conf.output, "text/num-info", TIB,
output_ext="tib",
extra_tag=dataset_type,
verbose=conf.verbose,
data_ext=conf.ext_replacement,
path_replacement=conf.path_replacement,
message="time-independent background "\
+"information",
tag="Average TIB",
units="counts/usec",
comments=[file_comment])
if conf.verbose:
print "Subtracting TIB constant from %s" % dataset_type
if t is not None:
t.getTime(False)
dp_som3 = common_lib.sub_ncerr(dp_som2, TIB)
if t is not None:
t.getTime(msg="After subtracting TIB constant from %s" \
% dataset_type)
del TIB
else:
dp_som3 = dp_som2
del dp_som2, dkcur1
if conf.dump_ctof_comb:
dp_som3_1 = dr_lib.sum_all_spectra(dp_som3)
hlr_utils.write_file(conf.output, "text/Spec", dp_som3_1,
output_ext="ctof",
extra_tag=dataset_type,
data_ext=conf.ext_replacement,
path_replacement=conf.path_replacement,
verbose=conf.verbose,
message="combined calibrated TOF information")
del dp_som3_1
return dp_som3
def run(config, tim=None):
"""
This method is where the data reduction process gets done.
@param config: Object containing the data reduction configuration
information.
@type config: L{hlr_utils.Configure}
@param tim: (OPTIONAL) Object that will allow the method to perform
timing evaluations.
@type tim: C{sns_time.DiffTime}
"""
import common_lib
import dr_lib
import DST
if tim is not None:
tim.getTime(False)
old_time = tim.getOldTime()
if config.data is None:
raise RuntimeError("Need to pass a data filename to the driver "\
+"script.")
# Read in geometry if one is provided
if config.inst_geom is not None:
if config.verbose:
print "Reading in instrument geometry file"
inst_geom_dst = DST.getInstance("application/x-NxsGeom",
config.inst_geom)
else:
inst_geom_dst = None
# Perform early background subtraction if the hwfix flag is used
if config.hwfix:
if not config.mc:
so_axis = "time_of_flight"
else:
so_axis = "Time_of_Flight"
bkg_som0 = dr_lib.add_files(config.back,
Data_Paths=config.data_paths.toPath(),
SO_Axis=so_axis,
Signal_ROI=config.roi_file,
dataset_type="background",
Verbose=config.verbose, Timer=tim)
bkg_som = dr_lib.fix_bin_contents(bkg_som0)
del bkg_som0
else:
bkg_som = None
# Perform Steps 1-15 on sample data
d_som1 = dr_lib.process_igs_data(config.data, config, timer=tim,
inst_geom_dst=inst_geom_dst,
tib_const=config.tib_data_const,
bkg_som=bkg_som)
# Perform Steps 1-15 on empty can data
if config.ecan is not None:
e_som1 = dr_lib.process_igs_data(config.ecan, config, timer=tim,
inst_geom_dst=inst_geom_dst,
dataset_type="empty_can",
tib_const=config.tib_ecan_const,
bkg_som=bkg_som)
else:
e_som1 = None
# Perform Steps 1-15 on normalization data
if config.norm is not None:
n_som1 = dr_lib.process_igs_data(config.norm, config, timer=tim,
inst_geom_dst=inst_geom_dst,
dataset_type="normalization",
tib_const=config.tib_norm_const,
bkg_som=bkg_som)
else:
n_som1 = None
# Perform Steps 1-15 on background data
if config.back is not None and not config.hwfix:
b_som1 = dr_lib.process_igs_data(config.back, config, timer=tim,
inst_geom_dst=inst_geom_dst,
dataset_type="background",
tib_const=config.tib_back_const)
else:
b_som1 = None
# Perform Step 1-15 on direct scattering background data
if config.dsback is not None:
ds_som1 = dr_lib.process_igs_data(config.dsback, config, timer=tim,
inst_geom_dst=inst_geom_dst,
tib_const=config.tib_dsback_const,
dataset_type="dsbackground",
bkg_som=bkg_som)
# Note: time_zero_slope MUST be a tuple
if config.time_zero_slope is not None:
ds_som1.attr_list["Time_zero_slope"] = \
config.time_zero_slope.toValErrTuple()
# Note: time_zero_offset MUST be a tuple
if config.time_zero_offset is not None:
ds_som1.attr_list["Time_zero_offset"] = \
config.time_zero_offset.toValErrTuple()
# Step 16: Linearly interpolate TOF elastic range in direct scattering
# background data
# First convert TOF elastic range to appropriate pixel initial
# wavelengths
if config.verbose:
print "Determining initial wavelength range for elastic line"
if tim is not None:
tim.getTime(False)
if config.tof_elastic is None:
# Units are in microseconds
tof_elastic_range = (140300, 141300)
else:
tof_elastic_range = config.tof_elastic
ctof_elastic_low = dr_lib.convert_single_to_list(\
"tof_to_initial_wavelength_igs_lin_time_zero",
(tof_elastic_range[0], 0.0),
ds_som1)
ctof_elastic_high = dr_lib.convert_single_to_list(\
"tof_to_initial_wavelength_igs_lin_time_zero",
(tof_elastic_range[1], 0.0),
ds_som1)
ctof_elastic_range = [(ctof_elastic_low[i][0], ctof_elastic_high[i][0])
for i in xrange(len(ctof_elastic_low))]
if tim is not None:
tim.getTime(msg="After calculating initial wavelength range for "\
+"elastic line ")
del ctof_elastic_low, ctof_elastic_high
# Now interpolate spectra between TOF elastic range (converted to
# initial wavelength)
if config.verbose:
print "Linearly interpolating direct scattering spectra"
if tim is not None:
tim.getTime(False)
ds_som2 = dr_lib.lin_interpolate_spectra(ds_som1, ctof_elastic_range)
if tim is not None:
tim.getTime(msg="After linearly interpolating direct scattering "\
+"spectra ")
if config.dump_dslin:
ds_som2_1 = dr_lib.sum_all_spectra(ds_som2,\
rebin_axis=config.lambda_bins.toNessiList())
hlr_utils.write_file(config.output, "text/Spec", ds_som2_1,
output_ext="lin",
data_ext=config.ext_replacement,
path_replacement=config.path_replacement,
verbose=config.verbose,
message="dsbackground linear interpolation")
del ds_som2_1
del ds_som1
else:
ds_som2 = None
if inst_geom_dst is not None:
inst_geom_dst.release_resource()
# Steps 17-18: Subtract background spectrum from sample spectrum
if config.dsback is None:
back_som = b_som1
bkg_type = "background"
else:
back_som = ds_som2
bkg_type = "dsbackground"
d_som2 = dr_lib.subtract_bkg_from_data(d_som1, back_som,
verbose=config.verbose,
timer=tim,
dataset1="data",
dataset2=bkg_type,
scale=config.scale_bs)
if config.dsback is not None:
del ds_som2
# Step 19: Zero region outside TOF elastic for background for empty can
if config.dsback is None:
bcs_som = b_som1
cs_som = e_som1
else:
if config.verbose and b_som1 is not None:
print "Zeroing background spectra"
if tim is not None and b_som1 is not None:
tim.getTime(False)
bcs_som = dr_lib.zero_spectra(b_som1, ctof_elastic_range)
if tim is not None and b_som1 is not None:
tim.getTime(msg="After zeroing background spectra")
if config.verbose and e_som1 is not None:
print "Zeroing empty can spectra"
if tim is not None and e_som1 is not None:
tim.getTime(False)
cs_som = dr_lib.zero_spectra(e_som1, ctof_elastic_range)
if tim is not None and e_som1 is not None:
tim.getTime(msg="After zeroing empty can spectra")
del ctof_elastic_range
# Steps 20-21: Subtract background spectrum from empty can spectrum
e_som2 = dr_lib.subtract_bkg_from_data(cs_som, bcs_som,
verbose=config.verbose,
timer=tim,
dataset1="empty_can",
dataset2="background",
scale=config.scale_bcs)
# Steps 22-23: Subtract background spectrum from empty can spectrum for
# normalization
e_som3 = dr_lib.subtract_bkg_from_data(e_som1, b_som1,
verbose=config.verbose,
timer=tim,
dataset1="empty_can",
dataset2="background",
scale=config.scale_bcn)
# Steps 24-25: Subtract background spectrum from normalization spectrum
n_som2 = dr_lib.subtract_bkg_from_data(n_som1, b_som1,
verbose=config.verbose,
timer=tim,
dataset1="normalization",
dataset2="background",
scale=config.scale_bn)
del b_som1, e_som1, bcs_som, cs_som
# Steps 26-27: Subtract empty can spectrum from sample spectrum
d_som3 = dr_lib.subtract_bkg_from_data(d_som2, e_som2,
verbose=config.verbose,
timer=tim,
dataset1="data",
dataset2="empty_can",
scale=config.scale_cs)
del d_som2, e_som2
# Steps 28-29: Subtract empty can spectrum from normalization spectrum
n_som3 = dr_lib.subtract_bkg_from_data(n_som2, e_som3,
verbose=config.verbose,
timer=tim,
dataset1="normalization",
dataset2="empty_can",
scale=config.scale_cn)
del n_som2, e_som3
# Step 30-32: Integrate normalization spectra
if config.verbose and n_som3 is not None:
print "Integrating normalization spectra"
norm_int = dr_lib.integrate_spectra(n_som3, start=config.norm_start,
end=config.norm_end, norm=True)
del n_som3
# Step 33: Normalize data by integrated values
if config.verbose and norm_int is not None:
print "Normalizing data by normalization data"
if norm_int is not None:
d_som4 = common_lib.div_ncerr(d_som3, norm_int)
else:
d_som4 = d_som3
if norm_int is not None:
if tim is not None:
tim.getTime(msg="After normalizing data ")
del d_som3, norm_int
# Step 35: Convert initial wavelength to E_initial
if config.verbose:
print "Converting initial wavelength to E_initial"
if tim is not None:
tim.getTime(False)
d_som6 = common_lib.wavelength_to_energy(d_som4)
if tim is not None:
tim.getTime(msg="After converting initial wavelength to E_initial ")
if config.dump_initial_energy:
hlr_utils.write_file(config.output, "text/Spec", d_som6,
output_ext="ixl",
data_ext=config.ext_replacement,
path_replacement=config.path_replacement,
verbose=config.verbose,
message="pixel initial energy information")
del d_som4
# Steps 36-37: Calculate energy transfer
if config.verbose:
print "Calculating energy transfer"
if tim is not None:
tim.getTime(False)
d_som7 = dr_lib.igs_energy_transfer(d_som6)
if tim is not None:
tim.getTime(msg="After calculating energy transfer ")
if config.dump_energy:
hlr_utils.write_file(config.output, "text/Spec", d_som7,
output_ext="exl",
data_ext=config.ext_replacement,
path_replacement=config.path_replacement,
verbose=config.verbose,
message="pixel energy transfer information")
# Write 3-column ASCII file for E_t
d_som7_1 = dr_lib.sum_all_spectra(d_som7,
rebin_axis=config.E_bins.toNessiList())
hlr_utils.write_file(config.output, "text/Spec", d_som7_1,
output_ext="etr",
data_ext=config.ext_replacement,
path_replacement=config.path_replacement,
verbose=config.verbose,
message="combined energy transfer information")
del d_som7_1
# Steps 34,36-37: Calculate scaled energy transfer
if config.verbose:
print "Calculating scaled energy transfer"
d_som9 = dr_lib.igs_energy_transfer(d_som6, scale=True)
if tim is not None:
tim.getTime(msg="After calculating scaled energy transfer ")
if config.dump_energy:
hlr_utils.write_file(config.output, "text/Spec", d_som9,
output_ext="sexl",
data_ext=config.ext_replacement,
path_replacement=config.path_replacement,
verbose=config.verbose,
message="pixel scaled energy transfer "\
+"information")
# Write 3-column ASCII file for scaled E_t
d_som9_1 = dr_lib.sum_all_spectra(d_som9,
rebin_axis=config.E_bins.toNessiList())
hlr_utils.write_file(config.output, "text/Spec", d_som9_1,
output_ext="setr",
data_ext=config.ext_replacement,
path_replacement=config.path_replacement,
verbose=config.verbose,
message="combined scaled energy transfer "\
+"information")
del d_som9_1
del d_som6, d_som7
d_som9.attr_list["config"] = config
hlr_utils.write_file(config.output, "text/rmd", d_som9,
output_ext="rmd",
data_ext=config.ext_replacement,
path_replacement=config.path_replacement,
verbose=config.verbose,
message="metadata")
if tim is not None:
tim.setOldTime(old_time)
tim.getTime(msg="Total Running Time")
def run(config):
"""
This method is where the data reduction process gets done.
@param config: Object containing the data reduction configuration
information.
@type config: L{hlr_utils.Configure}
"""
import sys
import dr_lib
import DST
try:
data_dst = DST.getInstance("application/x-NeXus", config.data[0])
except SystemError:
print "ERROR: Failed to data read file %s" % config.data[0]
sys.exit(-1)
so_axis = "time_of_flight"
if config.verbose:
print "Reading data file"
if config.roi_file is None:
d_som0 = data_dst.getSOM(config.data_paths.toPath(), so_axis,
start_id=config.starting_ids,
end_id=config.ending_ids)
else:
d_som0 = data_dst.getSOM(config.data_paths.toPath(), so_axis,
roi_file=config.roi_file)
if config.width:
d_som1 = dr_lib.fix_bin_contents(d_som0)
else:
d_som1 = d_som0
del d_som0
if config.dump_pxl:
hlr_utils.write_file(config.data[0], "text/Spec", d_som1,
output_ext="tfp", verbose=config.verbose,
path_replacement=config.path_replacement,
message="pixel TOF information")
else:
pass
if config.tib_const is not None:
import common_lib
d_som2 = common_lib.sub_ncerr(d_som1, config.tib_const.toValErrTuple())
if config.dump_sxl:
hlr_utils.write_file(config.data[0], "text/Spec", d_som2,
output_ext="tsp", verbose=config.verbose,
path_replacement=config.path_replacement,
message="TIB const sub pixel TOF information")
else:
d_som2 = d_som1
del d_som1
if len(d_som2) == 1:
if config.verbose:
print "Summing 1 spectrum."
d_som3 = d_som2
else:
if config.verbose:
print "Summing %d spectra." % len(d_som2)
d_som3 = dr_lib.sum_all_spectra(d_som2)
d_som3[0].id = d_som2[0].id
del d_som2
hlr_utils.write_file(config.output, "text/Spec", d_som3, replace_ext=False,
verbose=config.verbose,
path_replacement=config.path_replacement,
message="combined TOF information")
def run(config):
"""
This method is where the data reduction process gets done.
@param config: Object containing the data reduction configuration
information.
@type config: L{hlr_utils.Configure}
"""
import sys
import dr_lib
import DST
import SOM
banks = [("/entry/bank1", 1), ("/entry/bank2", 1)]
max_ids = (64, 64)
if config.vertical:
tag = "v"
size = max_ids[1]
reps = max_ids[0] / config.pixel_group
label = "Integrated pixel"
else:
tag = "h"
size = max_ids[1] / config.pixel_group
reps = max_ids[0] / config.sum_tubes
label = "Tube Number"
try:
data_dst = DST.getInstance("application/x-NeXus",
config.data)
except SystemError:
print "ERROR: Failed to data read file %s" % config.data
sys.exit(-1)
so_axis = "time_of_flight"
for path in banks:
bank = path[0].split('/')[-1]
for i in range(size):
tSOM = SOM.SOM()
tSO = SOM.SO(construct=True)
counter = 1
for j in range(reps):
if config.vertical:
starting_id = (i, config.pixel_group * j)
ending_id = (i + 1, config.pixel_group * (j + 1))
else:
if config.sum_tubes == 1:
x1 = j
x2 = j + 1
else:
x1 = j * config.sum_tubes
x2 = (j + 1) * config.sum_tubes
starting_id = (x1, config.pixel_group * i)
ending_id = (x2, config.pixel_group * (i + 1))
d_som1 = data_dst.getSOM(path, so_axis,
start_id=starting_id,
end_id=ending_id)
d_som2 = dr_lib.sum_all_spectra(d_som1)
d_som2[0].id = d_som1[0].id
d_som1 = None
del d_som1
value = dr_lib.integrate_axis(d_som2)
if config.verbose:
print "Sum", d_som2[0].id, ":", value[0], value[1]
tSO.axis[0].val.append(counter)
tSO.y.append(value[0])
tSO.var_y.append(value[1])
if counter == 1:
tSO.id = d_som2[0].id
counter += 1
tSOM.attr_list["filename"] = config.data
tSOM.setTitle("TOF Pixel Summation")
tSOM.setDataSetType("density")
tSOM.setYLabel("Intensity Sum")
tSOM.setYUnits("counts")
tSOM.setAxisLabel(0, label)
tSOM.setAxisUnits(0, "")
tSOM.append(tSO)
tag1 = str(i + 1)
outfile = bank + "_" + tag + "_" + tag1 + ".tof"
hlr_utils.write_file(outfile, "text/Spec", tSOM,
verbose=config.verbose,
message="intensity sum file",
replace_ext=False)
data_dst.release_resource()
def process_dgs_data(obj, conf, bcan, ecan, tcoeff, **kwargs):
"""
This function combines Steps 7 through 16 in Section 2.1.1 of the data
reduction process for Direct Geometry Spectrometers as specified by the
document at
U{http://neutrons.ornl.gov/asg/projects/SCL/reqspec/DR_Lib_RS.doc}. The
function takes a calibrated dataset, a L{hlr_utils.Configure} object and
processes the data accordingly.
@param obj: A calibrated dataset object.
@type obj: C{SOM.SOM}
@param conf: Object that contains the current setup of the driver.
@type conf: L{hlr_utils.Configure}
@param bcan: The object containing the black can data.
@type bcan: C{SOM.SOM}
@param ecan: The object containing the empty can data.
@type ecan: C{SOM.SOM}
@param tcoeff: The transmission coefficient appropriate to the given data
set.
@type tcoeff: C{tuple}
@param kwargs: A list of keyword arguments that the function accepts:
@keyword dataset_type: The practical name of the dataset being processed.
The default value is I{data}.
@type dataset_type: C{string}
@keyword cwp_used: A flag signalling the use of the chopper phase
corrections.
@type cwp_used: C{bool}
@keyword timer: Timing object so the function can perform timing estimates.
@type timer: C{sns_timer.DiffTime}
@return: Object that has undergone all requested processing steps
@rtype: C{SOM.SOM}
"""
import array_manip
import common_lib
import dr_lib
import hlr_utils
# Check keywords
try:
dataset_type = kwargs["dataset_type"]
except KeyError:
dataset_type = "data"
try:
t = kwargs["timer"]
except KeyError:
t = None
cwp_used = kwargs.get("cwp_used", False)
if conf.verbose:
print "Processing %s information" % dataset_type
# Step 7: Create black can background contribution
if bcan is not None:
if conf.verbose:
print "Creating black can background contribution for %s" \
% dataset_type
if t is not None:
t.getTime(False)
bccoeff = array_manip.sub_ncerr(1.0, 0.0, tcoeff[0], tcoeff[1])
bcan1 = common_lib.mult_ncerr(bcan, bccoeff)
if t is not None:
t.getTime(msg="After creating black can background contribution ")
del bcan
else:
bcan1 = None
# Step 8: Create empty can background contribution
if ecan is not None:
if conf.verbose:
print "Creating empty can background contribution for %s" \
% dataset_type
if t is not None:
t.getTime(False)
ecan1 = common_lib.mult_ncerr(ecan, tcoeff)
if t is not None:
t.getTime(msg="After creating empty can background contribution ")
del ecan
else:
ecan1 = None
# Step 9: Create background spectra
if bcan1 is not None or ecan1 is not None and conf.verbose:
print "Creating background spectra for %s" % dataset_type
if bcan1 is not None and ecan1 is not None:
if cwp_used:
if conf.verbose:
print "Rebinning empty can to black can axis."
ecan2 = common_lib.rebin_axis_1D_frac(ecan1, bcan1[0].axis[0].val)
else:
ecan2 = ecan1
del ecan1
if t is not None:
t.getTime(False)
b_som = common_lib.add_ncerr(bcan1, ecan2)
if t is not None:
t.getTime(msg="After creating background spectra ")
elif bcan1 is not None and ecan1 is None:
b_som = bcan1
elif bcan1 is None and ecan1 is not None:
b_som = ecan1
else:
b_som = None
del bcan1, ecan1
if cwp_used:
if conf.verbose:
print "Rebinning background spectra to %s" % dataset_type
b_som1 = common_lib.rebin_axis_1D_frac(b_som, obj[0].axis[0].val)
else:
b_som1 = b_som
del b_som
if conf.dump_ctof_comb and b_som1 is not None:
b_som_1 = dr_lib.sum_all_spectra(b_som1)
hlr_utils.write_file(conf.output, "text/Spec", b_som_1,
output_ext="ctof",
extra_tag="background",
data_ext=conf.ext_replacement,
path_replacement=conf.path_replacement,
verbose=conf.verbose,
message="combined background TOF information")
del b_som_1
# Step 10: Subtract background from data
obj1 = dr_lib.subtract_bkg_from_data(obj, b_som1, verbose=conf.verbose,
timer=t,
dataset1=dataset_type,
dataset2="background")
del obj, b_som1
# Step 11: Calculate initial velocity
if conf.verbose:
print "Calculating initial velocity"
if t is not None:
t.getTime(False)
if conf.initial_energy is not None:
initial_wavelength = common_lib.energy_to_wavelength(\
conf.initial_energy.toValErrTuple())
initial_velocity = common_lib.wavelength_to_velocity(\
initial_wavelength)
else:
# This should actually calculate it, but don't have a way right now
pass
if t is not None:
t.getTime(msg="After calculating initial velocity ")
# Step 12: Calculate the time-zero offset
if conf.time_zero_offset is not None:
time_zero_offset = conf.time_zero_offset.toValErrTuple()
else:
# This should actually calculate it, but don't have a way right now
time_zero_offset = (0.0, 0.0)
# Step 13: Convert time-of-flight to final velocity
if conf.verbose:
print "Converting TOF to final velocity DGS"
if t is not None:
t.getTime(False)
obj2 = common_lib.tof_to_final_velocity_dgs(obj1, initial_velocity,
time_zero_offset,
units="microsecond")
if t is not None:
t.getTime(msg="After calculating TOF to final velocity DGS ")
del obj1
# Step 14: Convert final velocity to final wavelength
if conf.verbose:
print "Converting final velocity DGS to final wavelength"
if t is not None:
t.getTime(False)
obj3 = common_lib.velocity_to_wavelength(obj2)
if t is not None:
t.getTime(msg="After calculating velocity to wavelength ")
del obj2
if conf.dump_wave_comb:
obj3_1 = dr_lib.sum_all_spectra(obj3,
rebin_axis=conf.lambda_bins.toNessiList())
hlr_utils.write_file(conf.output, "text/Spec", obj3_1,
output_ext="fwv",
extra_tag=dataset_type,
data_ext=conf.ext_replacement,
path_replacement=conf.path_replacement,
verbose=conf.verbose,
message="combined final wavelength information")
del obj3_1
# Step 15: Create the detector efficiency
if conf.det_eff is not None:
if conf.verbose:
print "Creating detector efficiency spectra"
if t is not None:
t.getTime(False)
det_eff = dr_lib.create_det_eff(obj3)
if t is not None:
t.getTime(msg="After creating detector efficiency spectra ")
else:
det_eff = None
# Step 16: Divide the detector pixel spectra by the detector efficiency
if det_eff is not None:
if conf.verbose:
print "Correcting %s for detector efficiency" % dataset_type
if t is not None:
t.getTime(False)
obj4 = common_lib.div_ncerr(obj3, det_eff)
if t is not None:
t.getTime(msg="After correcting %s for detector efficiency" \
% dataset_type)
else:
obj4 = obj3
del obj3, det_eff
return obj4