Пример #1
0
def test1():
    try:
        scope.lock()
        scope.write("*rst")
        #vxi_11.vxi_11_connection.abort(scope)
        print scope.core.port, scope.abort_channel.port, scope.idn

        grablen = 512
        loops = 1
        averages = 16
        mode = "real"
        timerange = 1e-5

        if mode == "rep":
            scope.average_mode(averages)
        else:
            scope.realtime_mode(grablen)

        if 1:  #do setup, which should always be done if the scope has been unlocked, since someone else might have used it.
            scope.set_edge_trigger(2,
                                   level=0,
                                   slope=-1,
                                   auto_trigger=1,
                                   coupling=scope.ac)
            scope.set_timebase(range=timerange)
            scope.set_channel(2,
                              range=5,
                              offset=2.5,
                              coupling=scope.dc,
                              lowpass=0,
                              impedance=None)
            scope.set_channel(3,
                              range=0.1,
                              offset=0,
                              coupling=scope.dc,
                              lowpass=0,
                              impedance=None)

        sum = None

        for i in range(loops):
            scope.digitize((2, 3))
            scope.wait_for_done(sleep=0.1, max_loops=100)
            waveform = Numeric.array(scope.get_current_data((2, 3)))

            if sum is None:
                sum = waveform
            else:
                sum += waveform

            print i

        sum *= (1.0 / loops)

        scope.unlock()

        g = graphite.Graph()
        g.formats = [dots(graphite.green), dots(graphite.red)]

        axis = g.axes[graphite.X]
        tick = axis.tickMarks[0]
        tick.labels = "%.2g"
        axis.label.text = "μSeconds"
        #tick.spacing = 0.05
        #axis.range=[-tick.spacing,plottime]
        axis.label.points[0] = (0., -0.1, 0.)  #move label closer to axis

        axis = g.axes[graphite.Y]
        tick = axis.tickMarks[0]
        tick.labels = "%+.3f"
        axis.label.text = "Volts"
        tick.inextent = 0.02
        tick.labelStyle = graphite.TextStyle(
            hjust=graphite.RIGHT,
            vjust=graphite.CENTER,
            font=graphite.Font(10, 0, 0, 0, None),
            color=graphite.Color(0.00, 0.00, 0.00))
        tick.labeldist = -0.01
        axis.label.points[0] = (-0.07, 0, 0.)  #move label closer to axis

        g.top = 25
        g.bottom = g.top + 400
        g.left = 100
        g.right = g.left + 600

        d = graphite.Dataset()
        d.x = scope.xaxis * 1e6
        d.y = sum[0]
        g.datasets.append(d)

        d = graphite.Dataset()
        d.x = scope.xaxis * 1e6
        d.y = sum[1]
        g.datasets.append(d)

        graphite.genOutput(g, 'QD', canvasname="Scope data", size=(800, 500))
        #graphite.genOutput(g,'PDF',canvasname="Scope_data", size=(800,500))
    except:
        scope.unlock_completely()
        scope.abort()
        traceback.print_exc()
def test1():
    try:
        scope.lock()
        # scope.write("*rst")
        # vxi_11.vxi_11_connection.abort(scope)
        print scope.core.port, scope.abort_channel.port, scope.idn

        #scope.set_edge_trigger(1, level=0.10, slope=1, auto_trigger=0, coupling=scope.dc)
        scope.set_edge_trigger(4,
                               level=0.9,
                               slope=1,
                               auto_trigger=0,
                               coupling=scope.dc)
        scope.set_channel(1,
                          range=1,
                          offset=0,
                          coupling=scope.ac,
                          atten=10.0,
                          lowpass=0,
                          impedance=None)
        scope.set_channel(2,
                          range=5,
                          offset=0,
                          coupling=scope.dc,
                          atten=1.0,
                          lowpass=0,
                          impedance=None)
        scope.set_channel(3,
                          range=1,
                          offset=1.2,
                          coupling=scope.dc,
                          atten=10.0,
                          lowpass=1,
                          impedance=None)
        scope.set_channel(4,
                          range=1,
                          offset=0.4,
                          coupling=scope.dc,
                          atten=1.0,
                          lowpass=0,
                          impedance=50)
        scope.end_sequential_mode()

        plotqd = 1
        plotpdf = 0
        xrange = None
        channels = (1, 2, 3)

        if 0:  # plot one really slow plot
            grablen = 8192
            timerange = 1e-2
            loops = 1
            plotskip = 1
            scope.realtime_mode(grablen)
            scope.set_timebase(range=timerange,
                               reference=scope.left,
                               delay=-2e-8)
            #timescale=1e6; timename="μSeconds"
            timescale = 1e3
            timename = "milliSeconds"
            #timescale=1e9; timename="nanoSeconds"
            # xrange=[-20,60]
            channels = (2, 3)
        if 1:
            timerange = 2e-7
            loops = 1
            plotskip = 1
            scope.sequential_mode(npoints=80, nsegments=50)
            scope.set_timebase(range=timerange,
                               reference=scope.left,
                               delay=770e-9)
            timescale = 1e9
            timename = "nanoSeconds"
            channels = (1, 2)
            plotqd = 1
            plotpdf = 1

        if 0:
            grablen = 512
            timerange = 1e-7
            loops = 1
            plotskip = 1
            scope.realtime_mode(grablen)
            scope.set_timebase(range=timerange,
                               reference=scope.left,
                               delay=-2e-7)
            #timescale=1e6; timename="μSeconds"
            timescale = 1e9
            timename = "nanoSeconds"
            # xrange=[-50,60]
            channels = (1, 2, 3, 4)
        if 0:
            timerange = 2e-7
            loops = 1
            plotskip = 1
            scope.sequential_mode(npoints=50, nsegments=1000)
            scope.set_timebase(range=timerange,
                               reference=scope.left,
                               delay=-2e-9)
            timescale = 1e9
            timename = "nanoSeconds"
            plotqd = 0
            plotpdf = 0

        if 0:
            timerange = 1e-7
            loops = 1
            plotskip = 1
            scope.set_timebase(range=timerange,
                               reference=scope.left,
                               delay=-2e-9)
            scope.average_mode(16)
            xrange = [-20, 60]
            timescale = 1e9
            timename = "nanoSeconds"

        sum = None

        for i in range(loops):
            scope.digitize(channels)
            scope.wait_for_done(sleep=0.1, max_loops=1000)
            waveform = Numeric.array(scope.get_current_data(channels))

            if sum is None:
                sum = waveform
            else:
                sum += waveform

        try:
            # if we have tags, print them as multiples of 1/480 second
            times = (scope.get_time_tags() * 480 + 0.5).astype(Numeric.Int)
            oops = Numeric.nonzero((times[1:] - times[:-1]) - 1)
            print oops
            print oops[1:] - oops[:-1]

            ranges = []
            np = scope.preamble["POINTS"]
            for i in oops:
                ranges += range((i - 5) * np, (i + 5) * np)
            sum = Numeric.take(sum, ranges, -1)
            scope.xaxis = Numeric.take(scope.xaxis, ranges, -1)

        except exceptions.AssertionError:
            pass

        sum *= (1.0 / loops)

        scope.unlock()

        if plotqd or plotpdf:

            g = graphite.Graph()

            axis = g.axes[graphite.X]
            tick = axis.tickMarks[0]
            tick.labels = "%.0f"
            scope.xaxis *= timescale
            axis.label.text = timename
            #tick.spacing = 0.05
            if xrange is not None:
                axis.range = xrange

            axis.label.points[0] = (0., -0.1, 0.)  # move label closer to axis

            axis = g.axes[graphite.Y]
            tick = axis.tickMarks[0]
            tick.labels = "%+.3f"
            axis.label.text = "Volts"
            tick.inextent = 0.02
            tick.labelStyle = graphite.TextStyle(
                hjust=graphite.RIGHT,
                vjust=graphite.CENTER,
                font=graphite.Font(10, 0, 0, 0, None),
                color=graphite.Color(0.00, 0.00, 0.00))
            tick.labeldist = -0.01
            axis.label.points[0] = (-0.07, 0, 0.)  # move label closer to axis

            g.top = 25
            g.bottom = g.top + 400
            g.left = 100
            g.right = g.left + 600

            for row in sum:
                d = graphite.Dataset()
                d.x = scope.xaxis[::plotskip]
                d.y = row[::plotskip]
                g.datasets.append(d)

            if plotqd:
                g.formats = [
                    dots(graphite.green),
                    dots(graphite.red),
                    dots(graphite.blue),
                    dots(graphite.orange)
                ]
                graphite.genOutput(g,
                                   'QD',
                                   canvasname="Scope data",
                                   size=(800, 500))
            if plotpdf:
                g.formats = [
                    lines(graphite.green),
                    lines(graphite.red),
                    lines(graphite.blue),
                    lines(graphite.orange)
                ]
                graphite.genOutput(g,
                                   'PDF',
                                   canvasname="Scope_data",
                                   size=(800, 500))

    except:
        scope.clear()
        scope.unlock_completely()
        scope.abort()
        traceback.print_exc()
Пример #3
0
def test1():
    try:
        scope.lock()
        # scope.write("*rst")
        # vxi_11.vxi_11_connection.abort(scope)
        print scope.core.port, scope.abort_channel.port, scope.idn

        # scope.set_edge_trigger(1, level=0.10, slope=1, auto_trigger=0, coupling=scope.dc)
        scope.set_edge_trigger(4, level=0.9, slope=1, auto_trigger=0, coupling=scope.dc)
        scope.set_channel(1, range=1, offset=0, coupling=scope.ac, atten=10.0, lowpass=0, impedance=None)
        scope.set_channel(2, range=5, offset=0, coupling=scope.dc, atten=1.0, lowpass=0, impedance=None)
        scope.set_channel(3, range=1, offset=1.2, coupling=scope.dc, atten=10.0, lowpass=1, impedance=None)
        scope.set_channel(4, range=1, offset=0.4, coupling=scope.dc, atten=1.0, lowpass=0, impedance=50)
        scope.end_sequential_mode()

        plotqd = 1
        plotpdf = 0
        xrange = None
        channels = (1, 2, 3)

        if 0:  # plot one really slow plot
            grablen = 8192
            timerange = 1e-2
            loops = 1
            plotskip = 1
            scope.realtime_mode(grablen)
            scope.set_timebase(range=timerange, reference=scope.left, delay=-2e-8)
            # timescale=1e6; timename="μSeconds"
            timescale = 1e3
            timename = "milliSeconds"
            # timescale=1e9; timename="nanoSeconds"
            # xrange=[-20,60]
            channels = (2, 3)
        if 1:
            timerange = 2e-7
            loops = 1
            plotskip = 1
            scope.sequential_mode(npoints=80, nsegments=50)
            scope.set_timebase(range=timerange, reference=scope.left, delay=770e-9)
            timescale = 1e9
            timename = "nanoSeconds"
            channels = (1, 2)
            plotqd = 1
            plotpdf = 1

        if 0:
            grablen = 512
            timerange = 1e-7
            loops = 1
            plotskip = 1
            scope.realtime_mode(grablen)
            scope.set_timebase(range=timerange, reference=scope.left, delay=-2e-7)
            # timescale=1e6; timename="μSeconds"
            timescale = 1e9
            timename = "nanoSeconds"
            # xrange=[-50,60]
            channels = (1, 2, 3, 4)
        if 0:
            timerange = 2e-7
            loops = 1
            plotskip = 1
            scope.sequential_mode(npoints=50, nsegments=1000)
            scope.set_timebase(range=timerange, reference=scope.left, delay=-2e-9)
            timescale = 1e9
            timename = "nanoSeconds"
            plotqd = 0
            plotpdf = 0

        if 0:
            timerange = 1e-7
            loops = 1
            plotskip = 1
            scope.set_timebase(range=timerange, reference=scope.left, delay=-2e-9)
            scope.average_mode(16)
            xrange = [-20, 60]
            timescale = 1e9
            timename = "nanoSeconds"

        sum = None

        for i in range(loops):
            scope.digitize(channels)
            scope.wait_for_done(sleep=0.1, max_loops=1000)
            waveform = Numeric.array(scope.get_current_data(channels))

            if sum is None:
                sum = waveform
            else:
                sum += waveform

        try:
            times = (scope.get_time_tags() * 480 + 0.5).astype(
                Numeric.Int
            )  # if we have tags, print them as multiples of 1/480 second
            oops = Numeric.nonzero((times[1:] - times[:-1]) - 1)
            print oops
            print oops[1:] - oops[:-1]

            ranges = []
            np = scope.preamble["POINTS"]
            for i in oops:
                ranges += range((i - 5) * np, (i + 5) * np)
            sum = Numeric.take(sum, ranges, -1)
            scope.xaxis = Numeric.take(scope.xaxis, ranges, -1)

        except exceptions.AssertionError:
            pass

        sum *= 1.0 / loops

        scope.unlock()

        if plotqd or plotpdf:

            g = graphite.Graph()

            axis = g.axes[graphite.X]
            tick = axis.tickMarks[0]
            tick.labels = "%.0f"
            scope.xaxis *= timescale
            axis.label.text = timename
            # tick.spacing = 0.05
            if xrange is not None:
                axis.range = xrange

            axis.label.points[0] = (0.0, -0.1, 0.0)  # move label closer to axis

            axis = g.axes[graphite.Y]
            tick = axis.tickMarks[0]
            tick.labels = "%+.3f"
            axis.label.text = "Volts"
            tick.inextent = 0.02
            tick.labelStyle = graphite.TextStyle(
                hjust=graphite.RIGHT,
                vjust=graphite.CENTER,
                font=graphite.Font(10, 0, 0, 0, None),
                color=graphite.Color(0.00, 0.00, 0.00),
            )
            tick.labeldist = -0.01
            axis.label.points[0] = (-0.07, 0, 0.0)  # move label closer to axis

            g.top = 25
            g.bottom = g.top + 400
            g.left = 100
            g.right = g.left + 600

            for row in sum:
                d = graphite.Dataset()
                d.x = scope.xaxis[::plotskip]
                d.y = row[::plotskip]
                g.datasets.append(d)

            if plotqd:
                g.formats = [dots(graphite.green), dots(graphite.red), dots(graphite.blue), dots(graphite.orange)]
                graphite.genOutput(g, "QD", canvasname="Scope data", size=(800, 500))
            if plotpdf:
                g.formats = [lines(graphite.green), lines(graphite.red), lines(graphite.blue), lines(graphite.orange)]
                graphite.genOutput(g, "PDF", canvasname="Scope_data", size=(800, 500))

    except:
        scope.clear()
        scope.unlock_completely()
        scope.abort()
        traceback.print_exc()
Пример #4
0
def test1():
	try:
		scope.lock()
		scope.write("*rst")
		#vxi_11.vxi_11_connection.abort(scope)
		print scope.core.port, scope.abort_channel.port, scope.idn				
		
		grablen=512; loops=1; averages=16; mode="real"; timerange=1e-5
		
		if mode=="rep":
			scope.average_mode(averages)
		else:
			scope.realtime_mode(grablen)

		if 1:  #do setup, which should always be done if the scope has been unlocked, since someone else might have used it.
			scope.set_edge_trigger(2, level=0, slope=-1, auto_trigger=1, coupling=scope.ac)
			scope.set_timebase(range=timerange)
			scope.set_channel(2, range=5, offset=2.5, coupling=scope.dc, lowpass=0, impedance=None)
			scope.set_channel(3, range=0.1, offset=0, coupling=scope.dc, lowpass=0, impedance=None)
		
									
		sum=None
		
		for i in range(loops):
			scope.digitize((2,3))
			scope.wait_for_done(sleep=0.1, max_loops=100)									
			waveform=Numeric.array( scope.get_current_data((2,3)) )
			
			if sum is None:
				sum = waveform
			else:
				sum += waveform
				
			print i
		
		sum *= (1.0/loops)
		
		scope.unlock()

		g=graphite.Graph()
		g.formats=[dots(graphite.green), dots(graphite.red)]
		
		axis=g.axes[graphite.X]
		tick=axis.tickMarks[0]				
		tick.labels = "%.2g"
		axis.label.text = "μSeconds"
		#tick.spacing = 0.05
		#axis.range=[-tick.spacing,plottime]
		axis.label.points[0]=(0., -0.1, 0.) #move label closer to axis
		
		axis=g.axes[graphite.Y]
		tick=axis.tickMarks[0]
		tick.labels = "%+.3f"
		axis.label.text = "Volts"				
		tick.inextent= 0.02
		tick.labelStyle=graphite.TextStyle(hjust=graphite.RIGHT, vjust=graphite.CENTER, 
			font=graphite.Font(10,0,0,0,None), 
			color=graphite.Color(0.00,0.00,0.00))
		tick.labeldist=-0.01
		axis.label.points[0]=(-0.07, 0, 0.) #move label closer to axis
		
		
		g.top = 25
		g.bottom=g.top+400
		g.left=100
		g.right=g.left+600		
				
		d=graphite.Dataset()
		d.x=scope.xaxis*1e6
		d.y=sum[0]
		g.datasets.append(d)

		d=graphite.Dataset()
		d.x=scope.xaxis*1e6
		d.y=sum[1]
		g.datasets.append(d)

		graphite.genOutput(g,'QD',canvasname="Scope data", size=(800,500))
		#graphite.genOutput(g,'PDF',canvasname="Scope_data", size=(800,500))
	except:
		scope.unlock_completely()
		scope.abort()
		traceback.print_exc()