def __init__(self, hass, config, required, optional=None):
"""Initialize the device.
The namelist argument lists the required addresses. E.g. for a dimming
actuators, the namelist might look like:
onoff_address: 0/0/1
brightness_address: 0/0/2
"""
from knxip.core import parse_group_address, KNXException
self.names = {}
self.values = {}
self._config = config
self._state = False
self._data = None
_LOGGER.debug("%s: initalizing KNX multi address device", self.name)
settings = self._config.config
if config.address:
_LOGGER.debug("%s: base address: address=%s", self.name,
settings.get('address'))
self.names[config.address] = 'base'
if config.state_address:
_LOGGER.debug("%s, state address: state_address=%s", self.name,
settings.get('state_address'))
self.names[config.state_address] = 'state'
# parse required addresses
for name in required:
paramname = '{}{}'.format(name, '_address')
addr = settings.get(paramname)
if addr is None:
_LOGGER.error("%s: Required KNX group address %s missing",
self.name, paramname)
raise KNXException("%s: Group address for {} missing in "
"configuration for {}".format(
self.name, paramname))
_LOGGER.debug("%s: (required parameter) %s=%s", self.name,
paramname, addr)
addr = parse_group_address(addr)
self.names[addr] = name
# parse optional addresses
for name in optional:
paramname = '{}{}'.format(name, '_address')
addr = settings.get(paramname)
_LOGGER.debug("%s: (optional parameter) %s=%s", self.name,
paramname, addr)
if addr:
try:
addr = parse_group_address(addr)
except KNXException:
_LOGGER.exception("%s: cannot parse group address %s",
self.name, addr)
self.names[addr] = name
def __init__(self, config):
"""Initialize the configuration."""
from knxip.core import parse_group_address
self.config = config
self.should_poll = config.get("poll", True)
self._address = parse_group_address(config.get("address"))
if self.config.get("state_address"):
self._state_address = parse_group_address(
self.config.get("state_address"))
else:
self._state_address = None
def __init__(self, hass, config, required, optional=None):
"""Initialize the device.
The namelist argument lists the required addresses. E.g. for a dimming
actuators, the namelist might look like:
onoff_address: 0/0/1
brightness_address: 0/0/2
"""
from knxip.core import parse_group_address, KNXException
super().__init__(self, hass, config)
self.config = config
# parse required addresses
for name in required:
paramname = name + "_address"
addr = self._config.config.get(paramname)
if addr is None:
_LOGGER.exception("Required KNX group address %s missing",
paramname)
raise KNXException("Group address missing in configuration")
addr = parse_group_address(addr)
self.names[addr] = name
# parse optional addresses
for name in optional:
paramname = name + "_address"
addr = self._config.config.get(paramname)
if addr:
try:
addr = parse_group_address(addr)
except KNXException:
_LOGGER.exception("Cannot parse group address %s", addr)
self.names[addr] = name
def handle_frame(frame):
"""Handle an incoming KNX frame.
Handle an incoming frame and update our status if it contains
information relating to this device.
"""
addr = frame.data[0]
if addr in self.names:
self.values[addr] = frame.data[1]
self.update_ha_state()
hass.bus.listen(EVENT_KNX_FRAME_RECEIVED, handle_frame)
def __init__(self, config):
"""Initialize the configuration."""
from knxip.core import parse_group_address
self.config = config
self.should_poll = config.get('poll', True)
if config.get('address'):
self._address = parse_group_address(config.get('address'))
else:
self._address = None
if self.config.get('state_address'):
self._state_address = parse_group_address(
self.config.get('state_address'))
else:
self._state_address = None
def test_group_address(self):
"""Does the group address parser work correctly?"""
self.assertEquals(parse_group_address("1"), 1)
self.assertEquals(parse_group_address("1678"), 1678)
self.assertEquals(parse_group_address("1/1"), 2049)
self.assertEquals(parse_group_address("2/2"), 4098)
self.assertEquals(parse_group_address("0/0/1"), 1)
self.assertEquals(parse_group_address("1/1/1"), 2305)
self.assertEquals(parse_group_address("4/8/45"), 10285)
def test_group_address(self):
"""Does the group address parser work correctly?"""
self.assertEquals(parse_group_address("1"), 1)
self.assertEquals(parse_group_address("1678"), 1678)
self.assertEquals(parse_group_address("1/1"), 2049)
self.assertEquals(parse_group_address("2/2"), 4098)
self.assertEquals(parse_group_address("0/0/1"), 1)
self.assertEquals(parse_group_address("1/1/1"), 2305)
self.assertEquals(parse_group_address("4/8/45"), 10285)
def __init__(self, hass, config, required, optional=None):
"""Initialize the device.
The namelist argument lists the required addresses. E.g. for a dimming
actuators, the namelist might look like:
onoff_address: 0/0/1
brightness_address: 0/0/2
"""
from knxip.core import parse_group_address, KNXException
self._config = config
self._state = False
self._data = None
_LOGGER.debug("Initalizing KNX multi address device")
# parse required addresses
for name in required:
_LOGGER.info(name)
paramname = name + "_address"
addr = self._config.config.get(paramname)
if addr is None:
_LOGGER.exception("Required KNX group address %s missing",
paramname)
raise KNXException(
"Group address for %s missing "
"in configuration", paramname)
addr = parse_group_address(addr)
self.names[addr] = name
# parse optional addresses
for name in optional:
paramname = name + "_address"
addr = self._config.config.get(paramname)
if addr:
try:
addr = parse_group_address(addr)
except KNXException:
_LOGGER.exception("Cannot parse group address %s", addr)
self.names[addr] = name
def __init__(self, hass, config, required, optional=None):
"""Initialize the device.
The namelist argument lists the required addresses. E.g. for a dimming
actuators, the namelist might look like:
onoff_address: 0/0/1
brightness_address: 0/0/2
"""
from knxip.core import parse_group_address, KNXException
self._config = config
self._state = False
self._data = None
_LOGGER.debug("Initalizing KNX multi address device")
# parse required addresses
for name in required:
_LOGGER.info(name)
paramname = name + "_address"
addr = self._config.config.get(paramname)
if addr is None:
_LOGGER.exception("Required KNX group address %s missing",
paramname)
raise KNXException("Group address for %s missing "
"in configuration", paramname)
addr = parse_group_address(addr)
self.names[addr] = name
# parse optional addresses
for name in optional:
paramname = name + "_address"
addr = self._config.config.get(paramname)
if addr:
try:
addr = parse_group_address(addr)
except KNXException:
_LOGGER.exception("Cannot parse group address %s", addr)
self.names[addr] = name
def __init__(self, knxiptunnel,
dateaddr=None,
timeaddr=None,
datetimeaddr=None,
daynightaddr=None,
lat=45,
long=0,
updateinterval=60):
""" Initialize the updater. """
self.tunnel = knxiptunnel
self.dateaddr = dateaddr
if timeaddr is not None:
self.timeaddr = parse_group_address(timeaddr)
else:
self.timeaddr = None
if dateaddr is not None:
self.dateaddr = parse_group_address(dateaddr)
else:
self.dateaddr = None
if datetimeaddr is not None:
self.datetimeaddr = parse_group_address(datetimeaddr)
else:
self.datetimeaddr = None
if daynightaddr is not None:
self.daynightaddr = parse_group_address(daynightaddr)
else:
self.daynightaddr = None
self.updateinterval = updateinterval
self.lat = lat
self.long = long
self.updater_running = False
def _handle_new_archive_record(self, event):
record = event.record
tunnel = self._knx_tunnel
try:
res = tunnel.connect()
if not res:
logerr(
'Could not connect to KNX/IP interface {0}, retry later'.
format(self._gateway_ip))
return
except KNXException as ex:
logerr(
'Exception during connect to KNX/IP interface {0}: {1}, retry later'
.format(self._gateway_ip, ex))
return
try:
for key, value in self._knx_map.items():
data = record.get(key)
if data is not None:
logdbg('Send {0} with data {1} to address {2}'.format(
key, data, value))
encoded_data = float_to_knx2(float(data))
tunnel.group_write(parse_group_address(value),
encoded_data)
else:
logerr(
'No value available for {0} and address {1}, nothing send'
.format(key, value))
except KNXException as ex:
logerr('KNXException raised : {0}'.format(ex))
try:
tunnel.disconnect()
except KNXException as ex:
logerr('KNXException raised : {0}'.format(ex))
def handle_knx_send(event):
"""Bridge knx_frame_send events to the KNX bus."""
try:
addr = event.data["address"]
except KeyError:
_LOGGER.error("KNX group address is missing")
return
try:
data = event.data["data"]
except KeyError:
_LOGGER.error("KNX data block missing")
return
knxaddr = None
try:
addr = int(addr)
except ValueError:
pass
if knxaddr is None:
try:
knxaddr = parse_group_address(addr)
except KNXException:
_LOGGER.error("KNX address format incorrect")
return
knxdata = None
if isinstance(data, list):
knxdata = data
else:
try:
knxdata = [int(data) & 0xff]
except ValueError:
_LOGGER.error("KNX data format incorrect")
return
KNXTUNNEL.group_write(knxaddr, knxdata)
def handle_knx_send(event):
"""Bridge knx_frame_send events to the KNX bus."""
try:
addr = event.data["address"]
except KeyError:
_LOGGER.error("KNX group address is missing")
return
try:
data = event.data["data"]
except KeyError:
_LOGGER.error("KNX data block missing")
return
knxaddr = None
try:
addr = int(addr)
except ValueError:
pass
if knxaddr is None:
try:
knxaddr = parse_group_address(addr)
except KNXException:
_LOGGER.error("KNX address format incorrect")
return
knxdata = None
if isinstance(data, list):
knxdata = data
else:
try:
knxdata = [int(data) & 0xff]
except ValueError:
_LOGGER.error("KNX data format incorrect")
return
KNXTUNNEL.group_write(knxaddr, knxdata)
def handle_group_write(call):
"""Bridge knx_frame_send events to the KNX bus."""
# parameters are pre-validated using KNX_WRITE_SCHEMA
addrlist = call.data.get("address")
knxdata = call.data.get("data")
knxaddrlist = []
for addr in addrlist:
try:
_LOGGER.debug("Found %s", addr)
knxaddr = int(addr)
except ValueError:
knxaddr = None
if knxaddr is None:
try:
knxaddr = parse_group_address(addr)
except KNXException:
_LOGGER.error("KNX address format incorrect: %s", addr)
knxaddrlist.append(knxaddr)
for addr in knxaddrlist:
KNXTUNNEL.group_write(addr, knxdata)
def setup(hass, config):
"""Set up the connection to the KNX IP interface."""
global KNXTUNNEL
from knxip.ip import KNXIPTunnel
from knxip.core import KNXException, parse_group_address
host = config[DOMAIN].get(CONF_HOST)
port = config[DOMAIN].get(CONF_PORT)
if host == '0.0.0.0':
_LOGGER.debug("Will try to auto-detect KNX/IP gateway")
KNXTUNNEL = KNXIPTunnel(host, port)
try:
res = KNXTUNNEL.connect()
_LOGGER.debug("Res = %s", res)
if not res:
_LOGGER.error("Could not connect to KNX/IP interface %s", host)
return False
except KNXException as ex:
_LOGGER.exception("Can't connect to KNX/IP interface: %s", ex)
KNXTUNNEL = None
return False
_LOGGER.info("KNX IP tunnel to %s:%i established", host, port)
def received_knx_event(address, data):
"""Process received KNX message."""
if len(data) == 1:
data = data[0]
hass.bus.fire('knx_event', {
'address': address,
'data': data
})
for listen in config[DOMAIN].get(CONF_LISTEN):
_LOGGER.debug("Registering listener for %s", listen)
try:
KNXTUNNEL.register_listener(parse_group_address(listen),
received_knx_event)
except KNXException as knxexception:
_LOGGER.error("Can't register KNX listener for address %s (%s)",
listen, knxexception)
hass.bus.listen_once(EVENT_HOMEASSISTANT_STOP, close_tunnel)
# Listen to KNX events and send them to the bus
def handle_knx_send(event):
"""Bridge knx_frame_send events to the KNX bus."""
try:
addr = event.data["address"]
except KeyError:
_LOGGER.error("KNX group address is missing")
return
try:
data = event.data["data"]
except KeyError:
_LOGGER.error("KNX data block missing")
return
knxaddr = None
try:
addr = int(addr)
except ValueError:
pass
if knxaddr is None:
try:
knxaddr = parse_group_address(addr)
except KNXException:
_LOGGER.error("KNX address format incorrect")
return
knxdata = None
if isinstance(data, list):
knxdata = data
else:
try:
knxdata = [int(data) & 0xff]
except ValueError:
_LOGGER.error("KNX data format incorrect")
return
KNXTUNNEL.group_write(knxaddr, knxdata)
# Listen for when knx_frame_send event is fired
hass.bus.listen(EVENT_KNX_FRAME_SEND, handle_knx_send)
return True
def setup(hass, config):
"""Set up the connection to the KNX IP interface."""
global KNXTUNNEL
from knxip.ip import KNXIPTunnel
from knxip.core import KNXException, parse_group_address
host = config[DOMAIN].get(CONF_HOST)
port = config[DOMAIN].get(CONF_PORT)
if host == '0.0.0.0':
_LOGGER.debug("Will try to auto-detect KNX/IP gateway")
KNXTUNNEL = KNXIPTunnel(host, port)
try:
res = KNXTUNNEL.connect()
_LOGGER.debug("Res = %s", res)
if not res:
_LOGGER.error("Could not connect to KNX/IP interface %s", host)
return False
except KNXException as ex:
_LOGGER.exception("Can't connect to KNX/IP interface: %s", ex)
KNXTUNNEL = None
return False
_LOGGER.info("KNX IP tunnel to %s:%i established", host, port)
def received_knx_event(address, data):
"""Process received KNX message."""
if len(data) == 1:
data = data[0]
hass.bus.fire('knx_event', {'address': address, 'data': data})
for listen in config[DOMAIN].get(CONF_LISTEN):
_LOGGER.debug("Registering listener for %s", listen)
try:
KNXTUNNEL.register_listener(parse_group_address(listen),
received_knx_event)
except KNXException as knxexception:
_LOGGER.error("Can't register KNX listener for address %s (%s)",
listen, knxexception)
hass.bus.listen_once(EVENT_HOMEASSISTANT_STOP, close_tunnel)
# Listen to KNX events and send them to the bus
def handle_knx_send(event):
"""Bridge knx_frame_send events to the KNX bus."""
try:
addr = event.data["address"]
except KeyError:
_LOGGER.error("KNX group address is missing")
return
try:
data = event.data["data"]
except KeyError:
_LOGGER.error("KNX data block missing")
return
knxaddr = None
try:
addr = int(addr)
except ValueError:
pass
if knxaddr is None:
try:
knxaddr = parse_group_address(addr)
except KNXException:
_LOGGER.error("KNX address format incorrect")
return
knxdata = None
if isinstance(data, list):
knxdata = data
else:
try:
knxdata = [int(data) & 0xff]
except ValueError:
_LOGGER.error("KNX data format incorrect")
return
KNXTUNNEL.group_write(knxaddr, knxdata)
# Listen for when knx_frame_send event is fired
hass.bus.listen(EVENT_KNX_FRAME_SEND, handle_knx_send)
return True
def setup(hass, config):
"""Set up the connection to the KNX IP interface."""
global KNXTUNNEL
from knxip.ip import KNXIPTunnel
from knxip.core import KNXException, parse_group_address
host = config[DOMAIN].get(CONF_HOST)
port = config[DOMAIN].get(CONF_PORT)
if host == '0.0.0.0':
_LOGGER.debug("Will try to auto-detect KNX/IP gateway")
KNXTUNNEL = KNXIPTunnel(host, port)
try:
res = KNXTUNNEL.connect()
_LOGGER.debug("Res = %s", res)
if not res:
_LOGGER.error("Could not connect to KNX/IP interface %s", host)
return False
except KNXException as ex:
_LOGGER.exception("Can't connect to KNX/IP interface: %s", ex)
KNXTUNNEL = None
return False
_LOGGER.info("KNX IP tunnel to %s:%i established", host, port)
descriptions = load_yaml_config_file(
os.path.join(os.path.dirname(__file__), 'services.yaml'))
def received_knx_event(address, data):
"""Process received KNX message."""
if len(data) == 1:
data = data[0]
hass.bus.fire('knx_event', {
'address': address,
'data': data
})
for listen in config[DOMAIN].get(CONF_LISTEN):
_LOGGER.debug("Registering listener for %s", listen)
try:
KNXTUNNEL.register_listener(parse_group_address(listen),
received_knx_event)
except KNXException as knxexception:
_LOGGER.error("Can't register KNX listener for address %s (%s)",
listen, knxexception)
hass.bus.listen_once(EVENT_HOMEASSISTANT_STOP, close_tunnel)
# Listen to KNX events and send them to the bus
def handle_group_write(call):
"""Bridge knx_frame_send events to the KNX bus."""
# parameters are pre-validated using KNX_WRITE_SCHEMA
addrlist = call.data.get("address")
knxdata = call.data.get("data")
knxaddrlist = []
for addr in addrlist:
try:
_LOGGER.debug("Found %s", addr)
knxaddr = int(addr)
except ValueError:
knxaddr = None
if knxaddr is None:
try:
knxaddr = parse_group_address(addr)
except KNXException:
_LOGGER.error("KNX address format incorrect: %s", addr)
knxaddrlist.append(knxaddr)
for addr in knxaddrlist:
KNXTUNNEL.group_write(addr, knxdata)
# Listen for when knx_frame_send event is fired
hass.services.register(DOMAIN,
KNX_GROUP_WRITE,
handle_group_write,
descriptions[DOMAIN][KNX_GROUP_WRITE],
schema=KNX_WRITE_SCHEMA)
return True
def __init__(self, hass, config, required, optional=None):
"""Initialize the device.
The namelist argument lists the required addresses. E.g. for a dimming
actuators, the namelist might look like:
onoff_address: 0/0/1
brightness_address: 0/0/2
"""
from knxip.core import parse_group_address, KNXException
self.names = {}
self.values = {}
self._config = config
self._state = False
self._data = None
_LOGGER.debug(
"%s: initalizing KNX multi address device",
self.name
)
settings = self._config.config
if config.address:
_LOGGER.debug(
"%s: base address: address=%s",
self.name, settings.get('address')
)
self.names[config.address] = 'base'
if config.state_address:
_LOGGER.debug(
"%s, state address: state_address=%s",
self.name, settings.get('state_address')
)
self.names[config.state_address] = 'state'
# parse required addresses
for name in required:
paramname = '{}{}'.format(name, '_address')
addr = settings.get(paramname)
if addr is None:
_LOGGER.error(
"%s: Required KNX group address %s missing",
self.name, paramname
)
raise KNXException(
"%s: Group address for {} missing in "
"configuration for {}".format(
self.name, paramname
)
)
_LOGGER.debug(
"%s: (required parameter) %s=%s",
self.name, paramname, addr
)
addr = parse_group_address(addr)
self.names[addr] = name
# parse optional addresses
for name in optional:
paramname = '{}{}'.format(name, '_address')
addr = settings.get(paramname)
_LOGGER.debug(
"%s: (optional parameter) %s=%s",
self.name, paramname, addr
)
if addr:
try:
addr = parse_group_address(addr)
except KNXException:
_LOGGER.exception(
"%s: cannot parse group address %s",
self.name, addr
)
self.names[addr] = name