Пример #1
0
    def __init__(self, hasScanner=True):
        QMainWindow.__init__(self)

        self.curDir = ""
        self.ui = Ui_Lector()
        self.ui.setupUi(self)

        self.ocrWidget = QOcrWidget("eng", 1, self.statusBar())

        self.textEditor = TextWidget()
        self.textEditorBar = EditorBar()
        self.textEditorBar.saveDocAsSignal.connect(self.textEditor.saveAs)
        self.textEditorBar.spellSignal.connect(self.textEditor.toggleSpell)
        self.textEditorBar.whiteSpaceSignal.connect(
            self.textEditor.togglewhiteSpace)
        self.textEditorBar.boldSignal.connect(self.textEditor.toggleBold)
        self.textEditorBar.italicSignal.connect(self.textEditor.toggleItalic)
        self.textEditorBar.underlineSignal.connect(
            self.textEditor.toggleUnderline)
        self.textEditorBar.strikethroughSignal.connect(
            self.textEditor.toggleStrikethrough)
        self.textEditorBar.subscriptSignal.connect(
            self.textEditor.toggleSubscript)
        self.textEditorBar.superscriptSignal.connect(
            self.textEditor.toggleSuperscript)
        self.textEditor.fontFormatSignal.connect(
            self.textEditorBar.toggleFormat)

        self.ui.mwTextEditor.addToolBar(self.textEditorBar)
        self.ui.mwTextEditor.setCentralWidget(self.textEditor)
        self.ocrWidget.textEditor = self.textEditor

        self.setCentralWidget(self.ocrWidget)

        self.ui.actionRotateRight.triggered.connect(self.ocrWidget.rotateRight)
        self.ui.actionRotateLeft.triggered.connect(self.ocrWidget.rotateLeft)
        self.ui.actionRotateFull.triggered.connect(self.ocrWidget.rotateFull)
        self.ui.actionZoomIn.triggered.connect(self.ocrWidget.zoomIn)
        self.ui.actionZoomOut.triggered.connect(self.ocrWidget.zoomOut)
        self.ui.actionOcr.triggered.connect(self.ocrWidget.doOcr)
        self.ocrWidget.scene().changedSelectedAreaType.connect(
            self.changedSelectedAreaType)

        try:
            languages = list(get_tesseract_languages())
        except TypeError:  # tesseract is not installed
            # TODO: replace QMessageBox.warning with QErrorMessage (but we need
            #      to keep state
            # dialog = QErrorMessage(self)
            # dialog.showMessage(
            #    self.tr("tessaract not available. Please check requirements"))
            QMessageBox.warning(self, "Tesseract",
                                self.tr("Tessaract is not available. "
                                        "Please check requirements."))
            self.ocrAvailable = False
            self.on_actionSettings_triggered(2)
        else:
            languages.sort()

            languages_ext = {
                'bul': self.tr('Bulgarian'),
                'cat': self.tr('Catalan'),
                'ces': self.tr('Czech'),
                'chi_tra': self.tr('Chinese (Traditional)'),
                'chi_sim': self.tr('Chinese (Simplified)'),
                'dan': self.tr('Danish'),
                'dan-frak': self.tr('Danish (Fraktur)'),
                'nld': self.tr('Dutch'),
                'eng': self.tr('English'),
                'fin': self.tr('Finnish'),
                'fra': self.tr('French'),
                'deu': self.tr('German'),
                'deu-frak': self.tr('German (Fraktur)'),
                'ell': self.tr('Greek'),
                'hun': self.tr('Hungarian'),
                'ind': self.tr('Indonesian'),
                'ita': self.tr('Italian'),
                'jpn': self.tr('Japanese'),
                'kor': self.tr('Korean'),
                'lav': self.tr('Latvian'),
                'lit': self.tr('Lithuanian'),
                'nor': self.tr('Norwegian'),
                'pol': self.tr('Polish'),
                'por': self.tr('Portuguese'),
                'ron': self.tr('Romanian'),
                'rus': self.tr('Russian'),
                'slk': self.tr('Slovak'),
                'slk-frak': self.tr('Slovak (Fraktur)'),
                'slv': self.tr('Slovenian'),
                'spa': self.tr('Spanish'),
                'srp': self.tr('Serbian'),
                'swe': self.tr('Swedish'),
                'swe-frak': self.tr('Swedish (Fraktur)'),
                'tgl': self.tr('Tagalog'),
                'tur': self.tr('Turkish'),
                'ukr': self.tr('Ukrainian'),
                'vie': self.tr('Vietnamese')
                }

            for lang in languages:
                try:
                    lang_ext = languages_ext[lang]
                except KeyError:
                    continue

                self.ui.rbtn_lang_select.addItem(lang_ext, lang)
                self.ui.rbtn_lang_select.currentIndexChanged.connect(
                    self.changeLanguage)

        #disable useless actions until a file has been opened
        self.enableActions(False)

        ## load saved settings
        self.readSettings()

        self.ui.actionScan.setEnabled(False)
        if hasScanner:
            self.on_actionChangeDevice_triggered()
        if not self.statusBar().currentMessage():
            self.statusBar().showMessage(self.tr("Ready"), 2000)
Пример #2
0
    def __init__(self, hasScanner=True):
        QMainWindow.__init__(self)

        self.curDir = ""
        self.ui = Ui_Lector()
        self.ui.setupUi(self)

        self.ocrWidget = QOcrWidget("eng", 1, self.statusBar())

        self.textEditor = TextWidget()
        self.textEditorBar = EditorBar()
        self.textEditorBar.saveDocAsSignal.connect(self.textEditor.saveAs)
        self.textEditorBar.spellSignal.connect(self.textEditor.toggleSpell)
        self.textEditorBar.whiteSpaceSignal.connect(
            self.textEditor.togglewhiteSpace)
        self.textEditorBar.boldSignal.connect(self.textEditor.toggleBold)
        self.textEditorBar.italicSignal.connect(self.textEditor.toggleItalic)
        self.textEditorBar.underlineSignal.connect(
            self.textEditor.toggleUnderline)
        self.textEditorBar.strikethroughSignal.connect(
            self.textEditor.toggleStrikethrough)
        self.textEditorBar.subscriptSignal.connect(
            self.textEditor.toggleSubscript)
        self.textEditorBar.superscriptSignal.connect(
            self.textEditor.toggleSuperscript)
        self.textEditor.fontFormatSignal.connect(
            self.textEditorBar.toggleFormat)

        self.ui.mwTextEditor.addToolBar(self.textEditorBar)
        self.ui.mwTextEditor.setCentralWidget(self.textEditor)
        self.ocrWidget.textEditor = self.textEditor

        self.setCentralWidget(self.ocrWidget)

        self.ui.actionRotateRight.triggered.connect(self.ocrWidget.rotateRight)
        self.ui.actionRotateLeft.triggered.connect(self.ocrWidget.rotateLeft)
        self.ui.actionRotateFull.triggered.connect(self.ocrWidget.rotateFull)
        self.ui.actionZoomIn.triggered.connect(self.ocrWidget.zoomIn)
        self.ui.actionZoomOut.triggered.connect(self.ocrWidget.zoomOut)
        self.ui.actionOcr.triggered.connect(self.ocrWidget.doOcr)
        self.ocrWidget.scene().changedSelectedAreaType.connect(
            self.changedSelectedAreaType)

        try:
            languages = list(get_tesseract_languages())
        except TypeError:  # tesseract is not installed
            # TODO: replace QMessageBox.warning with QErrorMessage (but we need
            #      to keep state
            # dialog = QErrorMessage(self)
            # dialog.showMessage(
            #    self.tr("tessaract not available. Please check requirements"))
            QMessageBox.warning(
                self, "Tesseract",
                self.tr("Tessaract is not available. "
                        "Please check requirements."))
            self.ocrAvailable = False
            self.on_actionSettings_triggered(2)
        else:
            languages.sort()

            languages_ext = {
                'bul': self.tr('Bulgarian'),
                'cat': self.tr('Catalan'),
                'ces': self.tr('Czech'),
                'chi_tra': self.tr('Chinese (Traditional)'),
                'chi_sim': self.tr('Chinese (Simplified)'),
                'dan': self.tr('Danish'),
                'dan-frak': self.tr('Danish (Fraktur)'),
                'nld': self.tr('Dutch'),
                'eng': self.tr('English'),
                'fin': self.tr('Finnish'),
                'fra': self.tr('French'),
                'deu': self.tr('German'),
                'deu-frak': self.tr('German (Fraktur)'),
                'ell': self.tr('Greek'),
                'hun': self.tr('Hungarian'),
                'ind': self.tr('Indonesian'),
                'ita': self.tr('Italian'),
                'jpn': self.tr('Japanese'),
                'kor': self.tr('Korean'),
                'lav': self.tr('Latvian'),
                'lit': self.tr('Lithuanian'),
                'nor': self.tr('Norwegian'),
                'pol': self.tr('Polish'),
                'por': self.tr('Portuguese'),
                'ron': self.tr('Romanian'),
                'rus': self.tr('Russian'),
                'slk': self.tr('Slovak'),
                'slk-frak': self.tr('Slovak (Fraktur)'),
                'slv': self.tr('Slovenian'),
                'spa': self.tr('Spanish'),
                'srp': self.tr('Serbian'),
                'swe': self.tr('Swedish'),
                'swe-frak': self.tr('Swedish (Fraktur)'),
                'tgl': self.tr('Tagalog'),
                'tur': self.tr('Turkish'),
                'ukr': self.tr('Ukrainian'),
                'vie': self.tr('Vietnamese')
            }

            for lang in languages:
                try:
                    lang_ext = languages_ext[lang]
                except KeyError:
                    continue

                self.ui.rbtn_lang_select.addItem(lang_ext, lang)
                self.ui.rbtn_lang_select.currentIndexChanged.connect(
                    self.changeLanguage)

        #disable useless actions until a file has been opened
        self.enableActions(False)

        ## load saved settings
        self.readSettings()

        self.ui.actionScan.setEnabled(False)
        if hasScanner:
            self.on_actionChangeDevice_triggered()
        if not self.statusBar().currentMessage():
            self.statusBar().showMessage(self.tr("Ready"), 2000)
Пример #3
0
class Window(QMainWindow):
    """ MainWindow
    """
    ocrAvailable = True
    thread = None

    def __init__(self, hasScanner=True):
        QMainWindow.__init__(self)

        self.curDir = ""
        self.ui = Ui_Lector()
        self.ui.setupUi(self)

        self.ocrWidget = QOcrWidget("eng", 1, self.statusBar())

        self.textEditor = TextWidget()
        self.textEditorBar = EditorBar()
        self.textEditorBar.saveDocAsSignal.connect(self.textEditor.saveAs)
        self.textEditorBar.spellSignal.connect(self.textEditor.toggleSpell)
        self.textEditorBar.whiteSpaceSignal.connect(
            self.textEditor.togglewhiteSpace)
        self.textEditorBar.boldSignal.connect(self.textEditor.toggleBold)
        self.textEditorBar.italicSignal.connect(self.textEditor.toggleItalic)
        self.textEditorBar.underlineSignal.connect(
            self.textEditor.toggleUnderline)
        self.textEditorBar.strikethroughSignal.connect(
            self.textEditor.toggleStrikethrough)
        self.textEditorBar.subscriptSignal.connect(
            self.textEditor.toggleSubscript)
        self.textEditorBar.superscriptSignal.connect(
            self.textEditor.toggleSuperscript)
        self.textEditor.fontFormatSignal.connect(
            self.textEditorBar.toggleFormat)

        self.ui.mwTextEditor.addToolBar(self.textEditorBar)
        self.ui.mwTextEditor.setCentralWidget(self.textEditor)
        self.ocrWidget.textEditor = self.textEditor

        self.setCentralWidget(self.ocrWidget)

        self.ui.actionRotateRight.triggered.connect(self.ocrWidget.rotateRight)
        self.ui.actionRotateLeft.triggered.connect(self.ocrWidget.rotateLeft)
        self.ui.actionRotateFull.triggered.connect(self.ocrWidget.rotateFull)
        self.ui.actionZoomIn.triggered.connect(self.ocrWidget.zoomIn)
        self.ui.actionZoomOut.triggered.connect(self.ocrWidget.zoomOut)
        self.ui.actionOcr.triggered.connect(self.ocrWidget.doOcr)
        self.ocrWidget.scene().changedSelectedAreaType.connect(
            self.changedSelectedAreaType)

        try:
            languages = list(get_tesseract_languages())
        except TypeError:  # tesseract is not installed
            # TODO: replace QMessageBox.warning with QErrorMessage (but we need
            #      to keep state
            # dialog = QErrorMessage(self)
            # dialog.showMessage(
            #    self.tr("tessaract not available. Please check requirements"))
            QMessageBox.warning(self, "Tesseract",
                                self.tr("Tessaract is not available. "
                                        "Please check requirements."))
            self.ocrAvailable = False
            self.on_actionSettings_triggered(2)
        else:
            languages.sort()

            languages_ext = {
                'bul': self.tr('Bulgarian'),
                'cat': self.tr('Catalan'),
                'ces': self.tr('Czech'),
                'chi_tra': self.tr('Chinese (Traditional)'),
                'chi_sim': self.tr('Chinese (Simplified)'),
                'dan': self.tr('Danish'),
                'dan-frak': self.tr('Danish (Fraktur)'),
                'nld': self.tr('Dutch'),
                'eng': self.tr('English'),
                'fin': self.tr('Finnish'),
                'fra': self.tr('French'),
                'deu': self.tr('German'),
                'deu-frak': self.tr('German (Fraktur)'),
                'ell': self.tr('Greek'),
                'hun': self.tr('Hungarian'),
                'ind': self.tr('Indonesian'),
                'ita': self.tr('Italian'),
                'jpn': self.tr('Japanese'),
                'kor': self.tr('Korean'),
                'lav': self.tr('Latvian'),
                'lit': self.tr('Lithuanian'),
                'nor': self.tr('Norwegian'),
                'pol': self.tr('Polish'),
                'por': self.tr('Portuguese'),
                'ron': self.tr('Romanian'),
                'rus': self.tr('Russian'),
                'slk': self.tr('Slovak'),
                'slk-frak': self.tr('Slovak (Fraktur)'),
                'slv': self.tr('Slovenian'),
                'spa': self.tr('Spanish'),
                'srp': self.tr('Serbian'),
                'swe': self.tr('Swedish'),
                'swe-frak': self.tr('Swedish (Fraktur)'),
                'tgl': self.tr('Tagalog'),
                'tur': self.tr('Turkish'),
                'ukr': self.tr('Ukrainian'),
                'vie': self.tr('Vietnamese')
                }

            for lang in languages:
                try:
                    lang_ext = languages_ext[lang]
                except KeyError:
                    continue

                self.ui.rbtn_lang_select.addItem(lang_ext, lang)
                self.ui.rbtn_lang_select.currentIndexChanged.connect(
                    self.changeLanguage)

        #disable useless actions until a file has been opened
        self.enableActions(False)

        ## load saved settings
        self.readSettings()

        self.ui.actionScan.setEnabled(False)
        if hasScanner:
            self.on_actionChangeDevice_triggered()
        if not self.statusBar().currentMessage():
            self.statusBar().showMessage(self.tr("Ready"), 2000)

    @pyqtSlot()
    def on_actionChangeDevice_triggered(self):
        ##SANE
        message = ''
        try:
            import sane
        except ImportError:
            # sane found no scanner - disable scanning;
            message = self.tr("Sane not found! Scanning is disabled.")
        else:
            from .scannerselect import ScannerSelect
            sane.init()
            sane_list = sane.get_devices()
            saved_device = settings.get('scanner:device')
            if saved_device in [x[0] for x in sane_list]:
                message = self.tr("Sane found configured device...")
                self.scannerSelected()
            elif not sane_list:
                message = self.tr("Sane dit not find any device! "
                                  "Scanning is disabled.")
            else:
                # there is not configured device => run configuration
                ss = ScannerSelect(sane_list, parent=self)
                ss.accepted.connect(self.scannerSelected)
                ss.show()
        self.statusBar().showMessage(message, 2000)

    def scannerSelected(self):
        self.ui.actionScan.setEnabled(True)

        if self.thread is None:
            from .scannerthread import ScannerThread

            self.thread = ScannerThread(self, settings.get('scanner:device'))
            self.thread.scannedImage.connect(self.on_scannedImage)

    def on_scannedImage(self):
        self.ocrWidget.scene().im = self.thread.im
        fn = self.tr("Unknown")
        self.ocrWidget.filename = fn
        self.ocrWidget.prepareDimensions()
        self.setWindowTitle("Lector: " + fn)
        self.enableActions()

    @pyqtSlot()
    def on_actionSettings_triggered(self, tabIndex = 0):
        settings_dialog = Settings(self, tabIndex)
        settings_dialog.accepted.connect(self.updateTextEditor)
        settings_dialog.show()

    def updateTextEditor(self):
        self.textEditor.setEditorFont()

    @pyqtSlot()
    def on_actionOpen_triggered(self):
        fn, _ = QFileDialog.getOpenFileName(self,
                self.tr("Open image"), self.curDir,
                self.tr("Images (*.tif *.tiff *.png *.jpg *.xpm)")
             )
        if not fn: return

        self.ocrWidget.filename = fn
        self.curDir = os.path.dirname(fn)
        self.ocrWidget.changeImage()
        self.setWindowTitle("Lector: " + fn)

        self.enableActions(True)

    def enableActions(self, enable=True):
        for action in (self.ui.actionRotateRight,
                       self.ui.actionRotateLeft,
                       self.ui.actionRotateFull,
                       self.ui.actionZoomIn,
                       self.ui.actionZoomOut,
                       self.ui.actionSaveDocumentAs,
                       self.ui.actionSaveImageAs,):
            action.setEnabled(enable)
        self.ui.actionOcr.setEnabled(enable and self.ocrAvailable)

    @pyqtSlot()
    def on_actionScan_triggered(self):
        self.thread.run()
        ##TODO: check thread end before the submission of a new task
        #self.thread.wait()

    def changeLanguage(self, row):
        lang = self.sender().itemData(row)
        self.ocrWidget.language = lang

    @pyqtSlot()
    def on_rbtn_text_clicked(self):
        self.ocrWidget.areaType = 1

    @pyqtSlot()
    def on_rbtn_image_clicked(self):
        self.ocrWidget.areaType = 2

    # clicking the change box type events
    # from image type to text
    # or from text type to image
    @pyqtSlot()
    def on_rbtn_areato_text_clicked(self):
        self.ocrWidget.scene().changeSelectedAreaType(1)

    @pyqtSlot()
    def on_rbtn_areato_image_clicked(self):
        self.ocrWidget.scene().changeSelectedAreaType(2)

    def readSettings(self):
        """ Read settings
        """
        setting = QSettings("Davide Setti", "Lector")
        pos = setting.value("pos", QPoint(50, 50))
        size = setting.value("size", QSize(800, 500))
        self.curDir = setting.value("file_dialog_dir", '~/')
        self.resize(size)
        self.move(pos)
        self.restoreGeometry(setting.value("mainWindowGeometry"))
        self.restoreState(setting.value("mainWindowState"))

        ## load saved language
        lang = setting.value("rbtn/lang", "")
        try:
            currentIndex = self.ui.rbtn_lang_select.findData(lang)
            self.ui.rbtn_lang_select.setCurrentIndex(currentIndex)
            self.ocrWidget.language = lang
        except KeyError:
            pass

    def writeSettings(self):
        """ Store settings
        """
        settings.set("pos", self.pos())
        settings.set("size", self.size())
        settings.set("file_dialog_dir", self.curDir)
        settings.set("mainWindowGeometry", self.saveGeometry())
        settings.set("mainWindowState", self.saveState())

        ## save language
        settings.set("rbtn/lang", self.ocrWidget.language)

    def closeEvent(self, event):
        """ Action before closing app
        """
        if (not self.ocrWidget.scene().isModified) or self.areYouSureToExit():
            self.writeSettings()
            event.accept()
        else:
            event.ignore()

    def areYouSureToExit(self):
        ret = QMessageBox(self.tr("Lector"),
                     self.tr("Are you sure you want to exit?"),
                     QMessageBox.Warning,
                     QMessageBox.Yes | QMessageBox.Default,
                     QMessageBox.No | QMessageBox.Escape,
                     QMessageBox.NoButton)
        ret.setWindowIcon(QIcon(":/icons/icons/L.png"))
        ret.setButtonText(QMessageBox.Yes, self.tr("Yes"))
        ret.setButtonText(QMessageBox.No, self.tr("No"))
        return ret.exec_() == QMessageBox.Yes

    @pyqtSlot()
    def on_actionSaveDocumentAs_triggered(self):
        self.textEditor.saveAs()

    @pyqtSlot()
    def on_actionSaveImageAs_triggered(self):
        fn = str(QFileDialog.getSaveFileName(self,
                        self.tr("Save image"), self.curDir,
                        self.tr("PNG image (*.png);;"
                                "TIFF image (*.tif *.tiff);;"
                                "BMP image (*.bmp)")
                        ))
        if not fn:
            return

        self.curDir = os.path.dirname(fn)
        ## TODO: move this to the Scene?
        self.ocrWidget.scene().im.save(fn)

    @pyqtSlot()
    def on_actionAbout_Lector_triggered(self):
        QMessageBox.about(self, self.tr("About Lector"), self.tr(
          "<p>The <b>Lector</b> is a graphical ocr solution for GNU/"
          "Linux and Windows based on Python, Qt4 and tessaract OCR.</p>"
          "<p>Scanning option is available only on GNU/Linux via SANE.</p>"
          "<p></p>"
          "<p><b>Author:</b> Davide Setti</p><p></p>"
          "<p><b>Contributors:</b> chopinX04, filip.dominec, zdposter</p>"
          "<p><b>Web site:</b> http://code.google.com/p/lector</p>"
          "<p><b>Source code:</b> "
          "http://sourceforge.net/projects/lector-ocr/</p>"
          "<p><b>Version:</b> %s</p>" % __version__)
          )

    def changedSelectedAreaType(self, _type):
        if _type in (1, 2):
            self.ui.rbtn_areato_text.setCheckable(True)
            self.ui.rbtn_areato_image.setCheckable(True)

            if _type == 1:
                self.ui.rbtn_areato_text.setChecked(True)
            else: #_type = 2
                self.ui.rbtn_areato_image.setChecked(True)
        else:
            self.ui.rbtn_areato_text.setCheckable(False)
            self.ui.rbtn_areato_text.update()
            self.ui.rbtn_areato_image.setCheckable(False)
            self.ui.rbtn_areato_image.update()
Пример #4
0
class Window(QMainWindow):
    """ MainWindow
    """
    ocrAvailable = True
    thread = None

    def __init__(self, hasScanner=True):
        QMainWindow.__init__(self)

        self.curDir = ""
        self.ui = Ui_Lector()
        self.ui.setupUi(self)

        self.ocrWidget = QOcrWidget("eng", 1, self.statusBar())

        self.textEditor = TextWidget()
        self.textEditorBar = EditorBar()
        self.textEditorBar.saveDocAsSignal.connect(self.textEditor.saveAs)
        self.textEditorBar.spellSignal.connect(self.textEditor.toggleSpell)
        self.textEditorBar.whiteSpaceSignal.connect(
            self.textEditor.togglewhiteSpace)
        self.textEditorBar.boldSignal.connect(self.textEditor.toggleBold)
        self.textEditorBar.italicSignal.connect(self.textEditor.toggleItalic)
        self.textEditorBar.underlineSignal.connect(
            self.textEditor.toggleUnderline)
        self.textEditorBar.strikethroughSignal.connect(
            self.textEditor.toggleStrikethrough)
        self.textEditorBar.subscriptSignal.connect(
            self.textEditor.toggleSubscript)
        self.textEditorBar.superscriptSignal.connect(
            self.textEditor.toggleSuperscript)
        self.textEditor.fontFormatSignal.connect(
            self.textEditorBar.toggleFormat)

        self.ui.mwTextEditor.addToolBar(self.textEditorBar)
        self.ui.mwTextEditor.setCentralWidget(self.textEditor)
        self.ocrWidget.textEditor = self.textEditor

        self.setCentralWidget(self.ocrWidget)

        self.ui.actionRotateRight.triggered.connect(self.ocrWidget.rotateRight)
        self.ui.actionRotateLeft.triggered.connect(self.ocrWidget.rotateLeft)
        self.ui.actionRotateFull.triggered.connect(self.ocrWidget.rotateFull)
        self.ui.actionZoomIn.triggered.connect(self.ocrWidget.zoomIn)
        self.ui.actionZoomOut.triggered.connect(self.ocrWidget.zoomOut)
        self.ui.actionOcr.triggered.connect(self.ocrWidget.doOcr)
        self.ocrWidget.scene().changedSelectedAreaType.connect(
            self.changedSelectedAreaType)

        try:
            languages = list(get_tesseract_languages())
        except TypeError:  # tesseract is not installed
            # TODO: replace QMessageBox.warning with QErrorMessage (but we need
            #      to keep state
            # dialog = QErrorMessage(self)
            # dialog.showMessage(
            #    self.tr("tessaract not available. Please check requirements"))
            QMessageBox.warning(
                self, "Tesseract",
                self.tr("Tessaract is not available. "
                        "Please check requirements."))
            self.ocrAvailable = False
            self.on_actionSettings_triggered(2)
        else:
            languages.sort()

            languages_ext = {
                'bul': self.tr('Bulgarian'),
                'cat': self.tr('Catalan'),
                'ces': self.tr('Czech'),
                'chi_tra': self.tr('Chinese (Traditional)'),
                'chi_sim': self.tr('Chinese (Simplified)'),
                'dan': self.tr('Danish'),
                'dan-frak': self.tr('Danish (Fraktur)'),
                'nld': self.tr('Dutch'),
                'eng': self.tr('English'),
                'fin': self.tr('Finnish'),
                'fra': self.tr('French'),
                'deu': self.tr('German'),
                'deu-frak': self.tr('German (Fraktur)'),
                'ell': self.tr('Greek'),
                'hun': self.tr('Hungarian'),
                'ind': self.tr('Indonesian'),
                'ita': self.tr('Italian'),
                'jpn': self.tr('Japanese'),
                'kor': self.tr('Korean'),
                'lav': self.tr('Latvian'),
                'lit': self.tr('Lithuanian'),
                'nor': self.tr('Norwegian'),
                'pol': self.tr('Polish'),
                'por': self.tr('Portuguese'),
                'ron': self.tr('Romanian'),
                'rus': self.tr('Russian'),
                'slk': self.tr('Slovak'),
                'slk-frak': self.tr('Slovak (Fraktur)'),
                'slv': self.tr('Slovenian'),
                'spa': self.tr('Spanish'),
                'srp': self.tr('Serbian'),
                'swe': self.tr('Swedish'),
                'swe-frak': self.tr('Swedish (Fraktur)'),
                'tgl': self.tr('Tagalog'),
                'tur': self.tr('Turkish'),
                'ukr': self.tr('Ukrainian'),
                'vie': self.tr('Vietnamese')
            }

            for lang in languages:
                try:
                    lang_ext = languages_ext[lang]
                except KeyError:
                    continue

                self.ui.rbtn_lang_select.addItem(lang_ext, lang)
                self.ui.rbtn_lang_select.currentIndexChanged.connect(
                    self.changeLanguage)

        #disable useless actions until a file has been opened
        self.enableActions(False)

        ## load saved settings
        self.readSettings()

        self.ui.actionScan.setEnabled(False)
        if hasScanner:
            self.on_actionChangeDevice_triggered()
        if not self.statusBar().currentMessage():
            self.statusBar().showMessage(self.tr("Ready"), 2000)

    @pyqtSlot()
    def on_actionChangeDevice_triggered(self):
        ##SANE
        message = ''
        try:
            import sane
        except ImportError:
            # sane found no scanner - disable scanning;
            message = self.tr("Sane not found! Scanning is disabled.")
        else:
            from .scannerselect import ScannerSelect
            sane.init()
            sane_list = sane.get_devices()
            saved_device = settings.get('scanner:device')
            if saved_device in [x[0] for x in sane_list]:
                message = self.tr("Sane found configured device...")
                self.scannerSelected()
            elif not sane_list:
                message = self.tr("Sane dit not find any device! "
                                  "Scanning is disabled.")
            else:
                # there is not configured device => run configuration
                ss = ScannerSelect(sane_list, parent=self)
                ss.accepted.connect(self.scannerSelected)
                ss.show()
        self.statusBar().showMessage(message, 2000)

    def scannerSelected(self):
        self.ui.actionScan.setEnabled(True)

        if self.thread is None:
            from .scannerthread import ScannerThread

            self.thread = ScannerThread(self, settings.get('scanner:device'))
            self.thread.scannedImage.connect(self.on_scannedImage)

    def on_scannedImage(self):
        self.ocrWidget.scene().im = self.thread.im
        fn = self.tr("Unknown")
        self.ocrWidget.filename = fn
        self.ocrWidget.prepareDimensions()
        self.setWindowTitle("Lector: " + fn)
        self.enableActions()

    @pyqtSlot()
    def on_actionSettings_triggered(self, tabIndex=0):
        settings_dialog = Settings(self, tabIndex)
        settings_dialog.accepted.connect(self.updateTextEditor)
        settings_dialog.show()

    def updateTextEditor(self):
        self.textEditor.setEditorFont()

    @pyqtSlot()
    def on_actionOpen_triggered(self):
        fn, _ = QFileDialog.getOpenFileName(
            self, self.tr("Open image"), self.curDir,
            self.tr("Images (*.tif *.tiff *.png *.jpg *.xpm)"))
        if not fn: return

        self.ocrWidget.filename = fn
        self.curDir = os.path.dirname(fn)
        self.ocrWidget.changeImage()
        self.setWindowTitle("Lector: " + fn)

        self.enableActions(True)

    def enableActions(self, enable=True):
        for action in (
                self.ui.actionRotateRight,
                self.ui.actionRotateLeft,
                self.ui.actionRotateFull,
                self.ui.actionZoomIn,
                self.ui.actionZoomOut,
                self.ui.actionSaveDocumentAs,
                self.ui.actionSaveImageAs,
        ):
            action.setEnabled(enable)
        self.ui.actionOcr.setEnabled(enable and self.ocrAvailable)

    @pyqtSlot()
    def on_actionScan_triggered(self):
        self.thread.run()
        ##TODO: check thread end before the submission of a new task
        #self.thread.wait()

    def changeLanguage(self, row):
        lang = self.sender().itemData(row)
        self.ocrWidget.language = lang

    @pyqtSlot()
    def on_rbtn_text_clicked(self):
        self.ocrWidget.areaType = 1

    @pyqtSlot()
    def on_rbtn_image_clicked(self):
        self.ocrWidget.areaType = 2

    # clicking the change box type events
    # from image type to text
    # or from text type to image
    @pyqtSlot()
    def on_rbtn_areato_text_clicked(self):
        self.ocrWidget.scene().changeSelectedAreaType(1)

    @pyqtSlot()
    def on_rbtn_areato_image_clicked(self):
        self.ocrWidget.scene().changeSelectedAreaType(2)

    def readSettings(self):
        """ Read settings
        """
        setting = QSettings("Davide Setti", "Lector")
        pos = setting.value("pos", QPoint(50, 50))
        size = setting.value("size", QSize(800, 500))
        self.curDir = setting.value("file_dialog_dir", '~/')
        self.resize(size)
        self.move(pos)
        self.restoreGeometry(setting.value("mainWindowGeometry"))
        self.restoreState(setting.value("mainWindowState"))

        ## load saved language
        lang = setting.value("rbtn/lang", "")
        try:
            currentIndex = self.ui.rbtn_lang_select.findData(lang)
            self.ui.rbtn_lang_select.setCurrentIndex(currentIndex)
            self.ocrWidget.language = lang
        except KeyError:
            pass

    def writeSettings(self):
        """ Store settings
        """
        settings.set("pos", self.pos())
        settings.set("size", self.size())
        settings.set("file_dialog_dir", self.curDir)
        settings.set("mainWindowGeometry", self.saveGeometry())
        settings.set("mainWindowState", self.saveState())

        ## save language
        settings.set("rbtn/lang", self.ocrWidget.language)

    def closeEvent(self, event):
        """ Action before closing app
        """
        if (not self.ocrWidget.scene().isModified) or self.areYouSureToExit():
            self.writeSettings()
            event.accept()
        else:
            event.ignore()

    def areYouSureToExit(self):
        ret = QMessageBox(self.tr("Lector"),
                          self.tr("Are you sure you want to exit?"),
                          QMessageBox.Warning,
                          QMessageBox.Yes | QMessageBox.Default,
                          QMessageBox.No | QMessageBox.Escape,
                          QMessageBox.NoButton)
        ret.setWindowIcon(QIcon(":/icons/icons/L.png"))
        ret.setButtonText(QMessageBox.Yes, self.tr("Yes"))
        ret.setButtonText(QMessageBox.No, self.tr("No"))
        return ret.exec_() == QMessageBox.Yes

    @pyqtSlot()
    def on_actionSaveDocumentAs_triggered(self):
        self.textEditor.saveAs()

    @pyqtSlot()
    def on_actionSaveImageAs_triggered(self):
        fn = str(
            QFileDialog.getSaveFileName(
                self, self.tr("Save image"), self.curDir,
                self.tr("PNG image (*.png);;"
                        "TIFF image (*.tif *.tiff);;"
                        "BMP image (*.bmp)")))
        if not fn:
            return

        self.curDir = os.path.dirname(fn)
        ## TODO: move this to the Scene?
        self.ocrWidget.scene().im.save(fn)

    @pyqtSlot()
    def on_actionAbout_Lector_triggered(self):
        QMessageBox.about(
            self, self.tr("About Lector"),
            self.
            tr("<p>The <b>Lector</b> is a graphical ocr solution for GNU/"
               "Linux and Windows based on Python, Qt4 and tessaract OCR.</p>"
               "<p>Scanning option is available only on GNU/Linux via SANE.</p>"
               "<p></p>"
               "<p><b>Author:</b> Davide Setti</p><p></p>"
               "<p><b>Contributors:</b> chopinX04, filip.dominec, zdposter</p>"
               "<p><b>Web site:</b> http://code.google.com/p/lector</p>"
               "<p><b>Source code:</b> "
               "http://sourceforge.net/projects/lector-ocr/</p>"
               "<p><b>Version:</b> %s</p>" % __version__))

    def changedSelectedAreaType(self, _type):
        if _type in (1, 2):
            self.ui.rbtn_areato_text.setCheckable(True)
            self.ui.rbtn_areato_image.setCheckable(True)

            if _type == 1:
                self.ui.rbtn_areato_text.setChecked(True)
            else:  #_type = 2
                self.ui.rbtn_areato_image.setChecked(True)
        else:
            self.ui.rbtn_areato_text.setCheckable(False)
            self.ui.rbtn_areato_text.update()
            self.ui.rbtn_areato_image.setCheckable(False)
            self.ui.rbtn_areato_image.update()