def _openSerial(self):
if self._port == 'AUTO':
self._changeState(self.STATE_DETECT_SERIAL)
programmer = stk500v2.Stk500v2()
self._log("Serial port list: %s" % (str(serialList())))
for p in serialList():
try:
self._log("Connecting to: %s" % (p))
programmer.connect(p)
self._serial = programmer.leaveISP()
break
except ispBase.IspError as (e):
self._log("Error while connecting to %s: %s" % (p, str(e)))
pass
except:
self._log(
"Unexpected error while connecting to serial port: %s %s"
% (p, getExceptionString()))
programmer.close()
if self._serial is None:
self._log("Failed to autodetect serial port")
self._errorValue = 'Failed to autodetect serial port.'
self._changeState(self.STATE_ERROR)
eventManager().fire("Error", self.getErrorString())
return False
elif self._port == 'VIRTUAL':
self._changeState(self.STATE_OPEN_SERIAL)
self._serial = VirtualPrinter()
else:
self._changeState(self.STATE_OPEN_SERIAL)
try:
self._log("Connecting to: %s" % self._port)
if self._baudrate == 0:
self._serial = serial.Serial(str(self._port),
115200,
timeout=0.1,
writeTimeout=10000)
else:
self._serial = serial.Serial(str(self._port),
self._baudrate,
timeout=settings().getFloat([
"serial", "timeout",
"connection"
]),
writeTimeout=10000)
except:
self._log(
"Unexpected error while connecting to serial port: %s %s" %
(self._port, getExceptionString()))
self._errorValue = "Failed to open serial port, permissions correct?"
self._changeState(self.STATE_ERROR)
eventManager().fire("Error", self.getErrorString())
return False
return True
def _readline(self):
if self._serial == None:
return None
try:
ret = self._serial.readline()
except:
self._log("Unexpected error while reading serial port: %s" % (getExceptionString()))
self._errorValue = getExceptionString()
self.close(True)
return None
if ret == '':
#self._log("Recv: TIMEOUT")
return ''
self._log("Recv: %s" % sanitizeAscii(ret))
return ret
def _readline(self):
if self._serial == None:
return None
try:
ret = self._serial.readline()
except:
self._log("Unexpected error while reading serial port: %s" % (getExceptionString()))
self._errorValue = getExceptionString()
self.close(True)
return None
if ret == '':
#self._log("Recv: TIMEOUT")
return ''
self._log("Recv: %s" % (unicode(ret, 'ascii', 'replace').encode('ascii', 'replace').rstrip()))
return ret
def _readline(self):
if self._serial == None:
return None
try:
ret = self._serial.readline()
except:
self._log("Unexpected error while reading serial port: %s" % (getExceptionString()))
self._errorValue = getExceptionString()
self.close(True)
return None
if ret == '':
#self._log("Recv: TIMEOUT")
return ''
self._log("Recv: %s" % (unicode(ret, 'ascii', 'replace').encode('ascii', 'replace').rstrip()))
return ret
def _readline(self):
if self._serial == None:
return None
try:
ret = self._serial.readline()
except:
self._log("Unexpected error while reading serial port: %s" % (getExceptionString()))
self._errorValue = getExceptionString()
self.close(True)
return None
if ret == '':
#self._log("Recv: TIMEOUT")
return ''
self._log("Recv: %s" % sanitizeAscii(ret))
return ret
def startPrint(self):
if not self.isOperational() or self.isPrinting():
return
if self._currentFile is None:
raise ValueError("No file selected for printing")
try:
self._currentFile.start()
self._lastLayerHeight = 0.0;
self._currentLayer = 0;
#self._currentLayer = 1;
#sefl._lastLayerHeight;
#self._callback.mcLayerChange(self._tentativeLayer)
wasPaused = self.isPaused()
self._changeState(self.STATE_PRINTING)
eventManager().fire(Events.PRINT_STARTED, {
"file": self._currentFile.getFilename(),
"filename": os.path.basename(self._currentFile.getFilename()),
"origin": self._currentFile.getFileLocation()
})
if self.isSdFileSelected():
if wasPaused:
self.sendCommand("M26 S0")
self._currentFile.setFilepos(0)
self.sendCommand("M24")
else:
self._sendNext()
except:
self._errorValue = getExceptionString()
self._changeState(self.STATE_ERROR)
eventManager().fire(Events.ERROR, {"error": self.getErrorString()})
def startPrint(self):
if not self.isOperational() or self.isPrinting():
return
if self._currentFile is None:
raise ValueError("No file selected for printing")
try:
self._currentFile.start()
wasPaused = self.isPaused()
self._changeState(self.STATE_PRINTING)
eventManager().fire(Events.PRINT_STARTED, {
"file": self._currentFile.getFilename(),
"filename": os.path.basename(self._currentFile.getFilename()),
"origin": self._currentFile.getFileLocation()
})
if self.isSdFileSelected():
if wasPaused:
self.sendCommand("M26 S0")
self._currentFile.setFilepos(0)
self.sendCommand("M24")
else:
self._sendNext()
except:
self._errorValue = getExceptionString()
self._changeState(self.STATE_ERROR)
eventManager().fire(Events.ERROR, {"error": self.getErrorString()})
def startPrint(self):
if not self.isOperational() or self.isPrinting():
return
if self._currentFile is None:
raise ValueError("No file selected for printing")
wasPaused = self.isPaused()
try:
self._currentFile.start()
self._changeState(self.STATE_PRINTING)
eventManager().fire("PrintStarted", self._currentFile.getFilename())
if self.isSdFileSelected():
if wasPaused:
self.sendCommand("M26 S0")
self._currentFile.setFilepos(0)
self.sendCommand("M24")
else:
self._sendNext()
except:
self._errorValue = getExceptionString()
self._changeState(self.STATE_ERROR)
eventManager().fire("Error", self.getErrorString())
def startPrint(self):
if not self.isOperational() or self.isPrinting():
return
if self._currentFile is None:
raise ValueError("No file selected for printing")
self._heatupWaitStartTime = 0
self._heatupWaitTimeLost = 0.0
self._pauseWaitStartTime = 0
self._pauseWaitTimeLost = 0.0
try:
self._currentFile.start()
wasPaused = self.isPaused()
self._changeState(self.STATE_PRINTING)
eventManager().fire(Events.PRINT_STARTED, {
"file": self._currentFile.getFilename(),
"filename": os.path.basename(self._currentFile.getFilename()),
"origin": self._currentFile.getFileLocation()
})
if self.isSdFileSelected():
if wasPaused:
self.sendCommand("M26 S0")
self._currentFile.setFilepos(0)
self.sendCommand("M24")
else:
self._sendNext()
except:
self._logger.exception("Error while trying to start printing")
self._errorValue = getExceptionString()
self._changeState(self.STATE_ERROR)
eventManager().fire(Events.ERROR, {"error": self.getErrorString()})
def startPrint(self):
if not self.isOperational() or self.isPrinting():
return
if self._currentFile is None:
raise ValueError("No file selected for printing")
wasPaused = self.isPaused()
try:
self._currentFile.start()
self._changeState(self.STATE_PRINTING)
eventManager().fire("PrintStarted",
self._currentFile.getFilename())
if self.isSdFileSelected():
if wasPaused:
self.sendCommand("M26 S0")
self._currentFile.setFilepos(0)
self.sendCommand("M24")
else:
self._sendNext()
except:
self._errorValue = getExceptionString()
self._changeState(self.STATE_ERROR)
eventManager().fire("Error", self.getErrorString())
def _connect(self):
self.changeState(State.OPENING_CONNECTION)
if self._port == "VIRTUAL":
self._serial = VirtualPrinter(read_timeout=self._readTimeout,
write_timeout=self._writeTimeout)
self.changeState(State.CONNECTED)
self._transport_logger.debug("Connected to %s" % self._serial)
else:
try:
self._serial = serial.Serial(self._port,
self._baudrate,
timeout=self._readTimeout,
writeTimeout=self._writeTimeout)
self.changeState(State.CONNECTED)
self._transport_logger.debug("Connected to %s" % self._serial)
except:
self.logError(
"Unexpected error while connecting to serial port: %s %s" %
(self._port, getExceptionString()))
self.onError(
"Failed to open serial port, permissions correct?")
return False
eventManager().fire(Events.CONNECTED, {
"port": self._port,
"baudrate": self._baudrate
})
return True
def _doSend(self, cmd):
#make sure sends are done orderly
with self._sendingLock:
self._serialLoggerEnabled and self._log("Send: %s" % cmd)
retriesLeft = 5
while True:
try:
self._serial.write(cmd + '\n')
break
except serial.SerialTimeoutException:
retriesLeft -= 1
if retriesLeft == 0:
self._serialLoggerEnabled and self._log("No more retries left. Closing the connection")
self._errorValue = "Unable to send data"
self.close(True)
break
else:
self._serialLoggerEnabled and self._log("Serial Timeout while sending data. Retries left: %d" % retriesLeft)
time.sleep(0.5)
except:
self._serialLoggerEnabled and self._log("Unexpected error while writing serial port: %s" % (getExceptionString()))
self._errorValue = getExceptionString()
self.close(True)
break
def _doSendWithoutChecksum(self, cmd):
self._log("Send: %s" % cmd)
try:
self._serial.write(cmd + '\n')
except serial.SerialTimeoutException:
self._log("Serial timeout while writing to serial port, trying again.")
try:
self._serial.write(cmd + '\n')
except:
self._log("Unexpected error while writing serial port: %s" % (getExceptionString()))
self._errorValue = getExceptionString()
self.close(True)
except:
self._log("Unexpected error while writing serial port: %s" % (getExceptionString()))
self._errorValue = getExceptionString()
self.close(True)
def _doSendWithoutChecksum(self, cmd):
self._log("Send: %s" % cmd)
try:
self._serial.write(cmd + '\n')
except serial.SerialTimeoutException:
self._log("Serial timeout while writing to serial port, trying again.")
try:
self._serial.write(cmd + '\n')
except:
self._log("Unexpected error while writing serial port: %s" % (getExceptionString()))
self._errorValue = getExceptionString()
self.close(True)
except:
self._log("Unexpected error while writing serial port: %s" % (getExceptionString()))
self._errorValue = getExceptionString()
self.close(True)
def write(self, value):
if self._socketWrite is not None:
#self._logger.info("PipeReadWrite write:%s" % value)
with self._stateMutex :
try:
self._socketWrite.send(value)
#self._socketWrite.flush()
except:
exceptionString = getExceptionString()
self._logger.error("Unexpected error while writing pipe port: %s" % exceptionString)
def write(self, value):
if self._socketWrite is not None:
#self._logger.info("PipeReadWrite write:%s" % value)
with self._stateMutex:
try:
self._socketWrite.send(value)
#self._socketWrite.flush()
except:
exceptionString = getExceptionString()
self._logger.error(
"Unexpected error while writing pipe port: %s" %
exceptionString)
def send(self, command):
commandToSend = command + "\n"
try:
self._pipe.write(commandToSend)
self._transport_logger.info("Send: %s" % command)
self.logTx(command)
#lkj except serial.SerialTimeoutException:
# self._transport_logger.warn("Timeout while sending: %s" % command)
# self.logError("Pipe timeout while writing to pipe port, try again later.")
# raise SendTimeout()
except:
exceptionString = getExceptionString()
self.logError("Unexpected error while writing pipe port: %s" % exceptionString)
self.onError(exceptionString)
self.disconnect(True)
raise TransportError()
def send(self, command):
commandToSend = command + "\n"
try:
self._serial.write(commandToSend)
self._transport_logger.info("Send: %s" % command)
self.logTx(command)
except serial.SerialTimeoutException:
self._transport_logger.warn("Timeout while sending: %s" % command)
self.logError("Serial timeout while writing to serial port, try again later.")
raise SendTimeout()
except:
exceptionString = getExceptionString()
self.logError("Unexpected error while writing serial port: %s" % exceptionString)
self.onError(exceptionString)
self.disconnect(True)
raise TransportError()
def _validate_profile(profile):
if not "name" in profile \
and "volume" in profile \
and "width" in profile["volume"] \
and "depth" in profile["volume"] \
and "height" in profile["volume"] \
and "formFactor" in profile["volume"] \
and "heatedBed" in profile \
and "extruder" in profile \
and "count" in profile["extruder"] \
and "offsets" in profile["extruder"] \
and len(profile["extruder"]["offsets"]) == profile["extruder"]["count"]:
return False
for dimension in ("width", "depth", "height"):
try:
profile["volume"][dimension] = float(profile["volume"][dimension])
except:
return False
if not profile["volume"]["formFactor"] in ("rectangular", "circular"):
return False
try:
profile["heatedBed"] = bool(profile["heatedBed"])
except:
return False
try:
profile["extruder"]["count"] = int(profile["extruder"]["count"])
except:
return False
converted_offsets = []
for offset in profile["extruder"]["offsets"]:
try:
#converted_offsets.append((float(offset[0]), float(offset[1]), float(offset[2])))
converted_offsets.append(offset)
except:
from octoprint.util import getExceptionString
exceptionString = getExceptionString()
print("lkj except : %s" % exceptionString)
return False
profile["extruder"]["offsets"] = converted_offsets
return True
def _validate_profile(profile):
if not "name" in profile \
and "volume" in profile \
and "width" in profile["volume"] \
and "depth" in profile["volume"] \
and "height" in profile["volume"] \
and "formFactor" in profile["volume"] \
and "heatedBed" in profile \
and "extruder" in profile \
and "count" in profile["extruder"] \
and "offsets" in profile["extruder"] \
and len(profile["extruder"]["offsets"]) == profile["extruder"]["count"]:
return False
for dimension in ("width", "depth", "height"):
try:
profile["volume"][dimension] = float(profile["volume"][dimension])
except:
return False
if not profile["volume"]["formFactor"] in ("rectangular", "circular"):
return False
try:
profile["heatedBed"] = bool(profile["heatedBed"])
except:
return False
try:
profile["extruder"]["count"] = int(profile["extruder"]["count"])
except:
return False
converted_offsets = []
for offset in profile["extruder"]["offsets"]:
try:
#converted_offsets.append((float(offset[0]), float(offset[1]), float(offset[2])))
converted_offsets.append(offset)
except:
from octoprint.util import getExceptionString
exceptionString = getExceptionString()
print("lkj except : %s" % exceptionString)
return False
profile["extruder"]["offsets"] = converted_offsets
return True
def _readline(self):
if self._serial is None:
return None
try:
line = self._serial.readline()
except:
exceptionString = getExceptionString()
self.logError("Unexpected error while reading serial port: %s" % exceptionString)
self.onError(exceptionString)
self.disconnect()
return None
if line != "":
loggable_line = unicode(line, "ascii", "replace").encode("ascii", "replace").rstrip()
self._transport_logger.debug("Recv: %s" % loggable_line)
self.logRx(loggable_line)
return line
def _readline(self):
if self._pipe is None:
return None
try:
line = self._pipe.readline()
except:
exceptionString = getExceptionString()
print("lkj Unexpected error while reading pipe port: %s" % exceptionString)
self.logError("Unexpected error while reading pipe port: %s" % exceptionString)
self.onError(exceptionString)
self.disconnect()
return None
if line != "":
loggable_line = unicode(line, "ascii", "replace").encode("ascii", "replace").rstrip()
self._transport_logger.debug("Recv: %s" % loggable_line)
self.logRx(loggable_line)
return line
def _openSerial(self):
if self._port == 'AUTO':
self._changeState(self.STATE_DETECT_SERIAL)
programmer = stk500v2.Stk500v2()
self._log("Serial port list: %s" % (str(self._callback.serialList())))
for p in self._callback.serialList():
try:
self._log("Connecting to: %s" % (p))
programmer.connect(p)
self._serial = programmer.leaveISP()
break
except ispBase.IspError as (e):
self._log("Error while connecting to %s: %s" % (p, str(e)))
pass
except:
self._log("Unexpected error while connecting to serial port: %s %s" % (p, getExceptionString()))
programmer.close()
if self._serial is None:
self._log("Failed to autodetect serial port")
self._errorValue = 'Failed to autodetect serial port.'
self._changeState(self.STATE_ERROR)
eventManager().fire(Events.ERROR, {"error": self.getErrorString()})
return False
elif self._port == 'VIRTUAL':
self._changeState(self.STATE_OPEN_SERIAL)
self._serial = VirtualPrinter()
else:
self._changeState(self.STATE_OPEN_SERIAL)
try:
self._log("Connecting to: %s" % self._port)
if self._baudrate == 0:
self._serial = serial.Serial(str(self._port), 115200, timeout=0.1, writeTimeout=10000)
else:
self._serial = serial.Serial(str(self._port), self._baudrate, timeout=settings().getFloat(["serial", "timeout", "connection"]), writeTimeout=10000)
except:
self._log("Unexpected error while connecting to serial port: %s %s" % (self._port, getExceptionString()))
self._errorValue = "Failed to open serial port, permissions correct?"
self._changeState(self.STATE_ERROR)
eventManager().fire(Events.ERROR, {"error": self.getErrorString()})
return False
return True
def _readline(self):
if self._serial == None:
return None
try:
ret = self._serial.readline()
except:
self._serialLoggerEnabled and self._log("Unexpected error while reading serial port: %s" % (getExceptionString()))
self._errorValue = getExceptionString()
self.close(True)
return None
if ret == '':
# self._serialLoggerEnabled and self._log("Recv: TIMEOUT")
return ''
self._serialLoggerEnabled and self._log("Recv: %s" % sanitizeAscii(ret))
if self._callback.broadcastTraffic > 0:
self._callback.doTrafficBroadcast('r', ret) #sanitizeAscii(ret))
return ret
def _monitor(self):
feedbackControls = settings().getFeedbackControls()
pauseTriggers = settings().getPauseTriggers()
feedbackErrors = []
#Open the serial port.
if self._port == 'AUTO':
self._changeState(self.STATE_DETECT_SERIAL)
programmer = stk500v2.Stk500v2()
self._log("Serial port list: %s" % (str(serialList())))
for p in serialList():
try:
self._log("Connecting to: %s" % (p))
programmer.connect(p)
self._serial = programmer.leaveISP()
break
except ispBase.IspError as (e):
self._log("Error while connecting to %s: %s" % (p, str(e)))
pass
except:
self._log("Unexpected error while connecting to serial port: %s %s" % (p, getExceptionString()))
programmer.close()
elif self._port == 'VIRTUAL':
self._changeState(self.STATE_OPEN_SERIAL)
self._serial = VirtualPrinter()
else:
self._changeState(self.STATE_OPEN_SERIAL)
try:
self._log("Connecting to: %s" % (self._port))
if self._baudrate == 0:
self._serial = serial.Serial(str(self._port), 115200, timeout=0.1, writeTimeout=10000)
else:
self._serial = serial.Serial(str(self._port), self._baudrate, timeout=settings().getFloat(["serial", "timeout", "connection"]), writeTimeout=10000)
except:
self._log("Unexpected error while connecting to serial port: %s %s" % (self._port, getExceptionString()))
if self._serial == None:
self._log("Failed to open serial port (%s)" % (self._port))
self._errorValue = 'Failed to autodetect serial port.'
self._changeState(self.STATE_ERROR)
eventManager().fire("Error", self.getErrorString())
return
self._log("Connected to: %s, starting monitor" % (self._serial))
if self._baudrate == 0:
self._changeState(self.STATE_DETECT_BAUDRATE)
else:
self._changeState(self.STATE_CONNECTING)
#Start monitoring the serial port.
timeout = getNewTimeout("communication")
tempRequestTimeout = timeout
sdStatusRequestTimeout = timeout
startSeen = not settings().getBoolean(["feature", "waitForStartOnConnect"])
heatingUp = False
swallowOk = False
while True:
try:
line = self._readline()
if line == None:
break
##~~ Error handling
# No matter the state, if we see an error, goto the error state and store the error for reference.
if line.startswith('Error:'):
#Oh YEAH, consistency.
# Marlin reports an MIN/MAX temp error as "Error:x\n: Extruder switched off. MAXTEMP triggered !\n"
# But a bed temp error is reported as "Error: Temperature heated bed switched off. MAXTEMP triggered !!"
# So we can have an extra newline in the most common case. Awesome work people.
if re.match('Error:[0-9]\n', line):
line = line.rstrip() + self._readline()
#Skip the communication errors, as those get corrected.
if 'checksum mismatch' in line \
or 'Wrong checksum' in line \
or 'Line Number is not Last Line Number' in line \
or 'expected line' in line \
or 'No Line Number with checksum' in line \
or 'No Checksum with line number' in line \
or 'Missing checksum' in line:
pass
elif not self.isError():
self._errorValue = line[6:]
self._changeState(self.STATE_ERROR)
eventManager().fire("Error", self.getErrorString())
##~~ SD file list
# if we are currently receiving an sd file list, each line is just a filename, so just read it and abort processing
if self._sdFileList and not 'End file list' in line:
self._sdFiles.append(line.strip().lower())
continue
##~~ Temperature processing
if ' T:' in line or line.startswith('T:'):
try:
self._temp = float(re.search("-?[0-9\.]*", line.split('T:')[1]).group(0))
if ' B:' in line:
self._bedTemp = float(re.search("-?[0-9\.]*", line.split(' B:')[1]).group(0))
self._callback.mcTempUpdate(self._temp, self._bedTemp, self._targetTemp, self._bedTargetTemp)
except ValueError:
# catch conversion issues, we'll rather just not get the temperature update instead of killing the connection
pass
#If we are waiting for an M109 or M190 then measure the time we lost during heatup, so we can remove that time from our printing time estimate.
if not 'ok' in line:
heatingUp = True
if self._heatupWaitStartTime != 0:
t = time.time()
self._heatupWaitTimeLost = t - self._heatupWaitStartTime
self._heatupWaitStartTime = t
##~~ SD Card handling
elif 'SD init fail' in line:
self._sdAvailable = False
self._sdFiles = []
self._callback.mcSdStateChange(self._sdAvailable)
elif 'Not SD printing' in line:
if self.isSdFileSelected() and self.isPrinting():
# something went wrong, printer is reporting that we actually are not printing right now...
self._sdFilePos = 0
self._changeState(self.STATE_OPERATIONAL)
elif 'SD card ok' in line:
self._sdAvailable = True
self.refreshSdFiles()
self._callback.mcSdStateChange(self._sdAvailable)
elif 'Begin file list' in line:
self._sdFiles = []
self._sdFileList = True
elif 'End file list' in line:
self._sdFileList = False
self._callback.mcSdFiles(self._sdFiles)
elif 'SD printing byte' in line:
# answer to M27, at least on Marlin, Repetier and Sprinter: "SD printing byte %d/%d"
match = re.search("([0-9]*)/([0-9]*)", line)
self._currentFile.setFilepos(int(match.group(1)))
self._callback.mcProgress()
elif 'File opened' in line:
# answer to M23, at least on Marlin, Repetier and Sprinter: "File opened:%s Size:%d"
match = re.search("File opened:\s*(.*?)\s+Size:\s*([0-9]*)", line)
self._currentFile = PrintingSdFileInformation(match.group(1), int(match.group(2)))
elif 'File selected' in line:
# final answer to M23, at least on Marlin, Repetier and Sprinter: "File selected"
self._callback.mcFileSelected(self._currentFile.getFilename(), self._currentFile.getFilesize(), True)
eventManager().fire("FileSelected", self._currentFile.getFilename())
elif 'Writing to file' in line:
# anwer to M28, at least on Marlin, Repetier and Sprinter: "Writing to file: %s"
self._printSection = "CUSTOM"
self._changeState(self.STATE_PRINTING)
elif 'Done printing file' in line:
# printer is reporting file finished printing
self._sdFilePos = 0
self._callback.mcPrintjobDone()
self._changeState(self.STATE_OPERATIONAL)
eventManager().fire("PrintDone")
##~~ Message handling
elif line.strip() != '' and line.strip() != 'ok' and not line.startswith("wait") and not line.startswith('Resend:') and line != 'echo:Unknown command:""\n' and self.isOperational():
self._callback.mcMessage(line)
##~~ Parsing for feedback commands
if feedbackControls:
for name, matcher, template in feedbackControls:
try:
match = matcher.search(line)
if match is not None:
format = None
if isinstance(template, str):
format = str.format
elif isinstance(template, unicode):
format = unicode.format
if format is not None:
self._callback.mcReceivedRegisteredMessage(name, format(template, *(match.groups("n/a"))))
except:
if not name in feedbackErrors:
self._logger.info("Something went wrong with feedbackControl \"%s\": " % name, exc_info=True)
feedbackErrors.append(name)
pass
##~~ Parsing for pause triggers
if pauseTriggers:
if "enable" in pauseTriggers.keys() and pauseTriggers["enable"].search(line) is not None:
self.setPause(True)
elif "disable" in pauseTriggers.keys() and pauseTriggers["disable"].search(line) is not None:
self.setPause(False)
elif "toggle" in pauseTriggers.keys() and pauseTriggers["toggle"].search(line) is not None:
self.setPause(not self.isPaused())
if "ok" in line and heatingUp:
heatingUp = False
### Baudrate detection
if self._state == self.STATE_DETECT_BAUDRATE:
if line == '' or time.time() > timeout:
if len(self._baudrateDetectList) < 1:
self.close()
self._errorValue = "No more baudrates to test, and no suitable baudrate found."
self._changeState(self.STATE_ERROR)
eventManager().fire("Error", self.getErrorString())
elif self._baudrateDetectRetry > 0:
self._baudrateDetectRetry -= 1
self._serial.write('\n')
self._log("Baudrate test retry: %d" % (self._baudrateDetectRetry))
self._sendCommand("M105")
self._testingBaudrate = True
else:
baudrate = self._baudrateDetectList.pop(0)
try:
self._serial.baudrate = baudrate
self._serial.timeout = settings().getFloat(["serial", "timeout", "detection"])
self._log("Trying baudrate: %d" % (baudrate))
self._baudrateDetectRetry = 5
self._baudrateDetectTestOk = 0
timeout = getNewTimeout("communication")
self._serial.write('\n')
self._sendCommand("M105")
self._testingBaudrate = True
except:
self._log("Unexpected error while setting baudrate: %d %s" % (baudrate, getExceptionString()))
elif 'ok' in line and 'T:' in line:
self._baudrateDetectTestOk += 1
if self._baudrateDetectTestOk < 10:
self._log("Baudrate test ok: %d" % (self._baudrateDetectTestOk))
self._sendCommand("M105")
else:
self._sendCommand("M999")
self._serial.timeout = settings().getFloat(["serial", "timeout", "connection"])
self._changeState(self.STATE_OPERATIONAL)
if self._sdAvailable:
self.refreshSdFiles()
eventManager().fire("Connected", "%s at %s baud" % (self._port, self._baudrate))
else:
self._testingBaudrate = False
### Connection attempt
elif self._state == self.STATE_CONNECTING:
if (line == "" or "wait" in line) and startSeen:
self._sendCommand("M105")
elif "start" in line:
startSeen = True
elif "ok" in line and startSeen:
self._changeState(self.STATE_OPERATIONAL)
if self._sdAvailable:
self.refreshSdFiles()
eventManager().fire("Connected", "%s at %s baud" % (self._port, self._baudrate))
elif time.time() > timeout:
self.close()
### Operational
elif self._state == self.STATE_OPERATIONAL or self._state == self.STATE_PAUSED:
#Request the temperature on comm timeout (every 5 seconds) when we are not printing.
if line == "" or "wait" in line:
if self._resendDelta is not None:
self._resendNextCommand()
elif not self._commandQueue.empty():
self._sendCommand(self._commandQueue.get())
else:
self._sendCommand("M105")
tempRequestTimeout = getNewTimeout("communication")
# resend -> start resend procedure from requested line
elif line.lower().startswith("resend") or line.lower().startswith("rs"):
if settings().get(["feature", "swallowOkAfterResend"]):
swallowOk = True
self._handleResendRequest(line)
### Printing
elif self._state == self.STATE_PRINTING:
if line == "" and time.time() > timeout:
self._log("Communication timeout during printing, forcing a line")
line = 'ok'
if self.isSdPrinting():
if time.time() > tempRequestTimeout and not heatingUp:
self._sendCommand("M105")
tempRequestTimeout = getNewTimeout("communication")
if time.time() > sdStatusRequestTimeout and not heatingUp:
self._sendCommand("M27")
sdStatusRequestTimeout = time.time() + 1
if 'ok' or 'SD printing byte' in line:
timeout = getNewTimeout("communication")
else:
# Even when printing request the temperature every 5 seconds.
if time.time() > tempRequestTimeout and not self.isStreaming():
self._commandQueue.put("M105")
tempRequestTimeout = getNewTimeout("communication")
if "ok" in line and swallowOk:
swallowOk = False
elif "ok" in line:
timeout = getNewTimeout("communication")
if self._resendDelta is not None:
self._resendNextCommand()
elif not self._commandQueue.empty() and not self.isStreaming():
self._sendCommand(self._commandQueue.get())
else:
self._sendNext()
elif line.lower().startswith("resend") or line.lower().startswith("rs"):
if settings().get(["feature", "swallowOkAfterResend"]):
swallowOk = True
self._handleResendRequest(line)
except:
self._logger.exception("Something crashed inside the serial connection loop, please report this in OctoPrint's bug tracker:")
errorMsg = "See octoprint.log for details"
self._log(errorMsg)
self._errorValue = errorMsg
self._changeState(self.STATE_ERROR)
eventManager().fire("Error", self.getErrorString())
self._log("Connection closed, closing down monitor")
def _monitor(self):
feedbackControls = settings().getFeedbackControls()
pauseTriggers = settings().getPauseTriggers()
feedbackErrors = []
#Open the serial port.
if not self._openSerial():
return
self._log("Connected to: %s, starting monitor" % self._serial)
if self._baudrate == 0:
self._log("Starting baud rate detection")
self._changeState(self.STATE_DETECT_BAUDRATE)
else:
self._changeState(self.STATE_CONNECTING)
#Start monitoring the serial port.
timeout = getNewTimeout("communication")
tempRequestTimeout = getNewTimeout("temperature")
sdStatusRequestTimeout = getNewTimeout("sdStatus")
startSeen = not settings().getBoolean(["feature", "waitForStartOnConnect"])
self._heatingUp = False
swallowOk = False
supportRepetierTargetTemp = settings().getBoolean(["feature", "repetierTargetTemp"])
while True:
try:
line = self._readline()
if line is None:
break
if line.strip() is not "" and line.isalnum():
timeout = getNewTimeout("communication")
##~~ Error handling
line = self._handleErrors(line)
##~~ SD file list
# if we are currently receiving an sd file list, each line is just a filename, so just read it and abort processing
if self._sdFileList and not "End file list" in line:
fileinfo = line.strip().split(None, 2)
if len(fileinfo) > 1:
# we got extended file information here, so let's split filename and size and try to make them a bit nicer
filename, size = fileinfo
filename = filename.lower()
try:
size = int(size)
except ValueError:
# whatever that was, it was not an integer, so we'll just ignore it and set size to None
size = None
else:
# no extended file information, so only the filename is there and we set size to None
filename = fileinfo[0].lower()
size = None
if self._callback.fileManager.isValidFilename(filename):
if filterNonAscii(filename):
self._logger.warn("Got a file from printer's SD that has a non-ascii filename (%s), that shouldn't happen according to the protocol" % filename)
else:
self._sdFiles.append((filename, size))
continue
##~~ Temperature processing
if ' T:' in line or line.startswith('T:') or ' T0:' in line or line.startswith('T0:'):
self._processTemperatures(line)
self._callback.mcTempUpdate(self._temp, self._bedTemp)
#If we are waiting for an M109 or M190 then measure the time we lost during heatup, so we can remove that time from our printing time estimate.
if not 'ok' in line and self._heatupWaitStartTime != 0:
t = time.time()
self._heatupWaitTimeLost = t - self._heatupWaitStartTime
self._heatupWaitStartTime = t
elif supportRepetierTargetTemp and ('TargetExtr' in line or 'TargetBed' in line):
matchExtr = self._regex_repetierTempExtr.match(line)
matchBed = self._regex_repetierTempBed.match(line)
if matchExtr is not None:
toolNum = int(matchExtr.group(1))
try:
target = float(matchExtr.group(2))
if toolNum in self._temp.keys() and self._temp[toolNum] is not None and isinstance(self._temp[toolNum], tuple):
(actual, oldTarget) = self._temp[toolNum]
self._temp[toolNum] = (actual, target)
else:
self._temp[toolNum] = (None, target)
self._callback.mcTempUpdate(self._temp, self._bedTemp)
except ValueError:
pass
elif matchBed is not None:
try:
target = float(matchBed.group(1))
if self._bedTemp is not None and isinstance(self._bedTemp, tuple):
(actual, oldTarget) = self._bedTemp
self._bedTemp = (actual, target)
else:
self._bedTemp = (None, target)
self._callback.mcTempUpdate(self._temp, self._bedTemp)
except ValueError:
pass
##~~ SD Card handling
elif 'SD init fail' in line or 'volume.init failed' in line or 'openRoot failed' in line:
self._sdAvailable = False
self._sdFiles = []
self._callback.mcSdStateChange(self._sdAvailable)
elif 'Not SD printing' in line:
if self.isSdFileSelected() and self.isPrinting():
# something went wrong, printer is reporting that we actually are not printing right now...
self._sdFilePos = 0
self._changeState(self.STATE_OPERATIONAL)
elif 'SD card ok' in line and not self._sdAvailable:
self._sdAvailable = True
self.refreshSdFiles()
self._callback.mcSdStateChange(self._sdAvailable)
elif 'Begin file list' in line:
self._sdFiles = []
self._sdFileList = True
elif 'End file list' in line:
self._sdFileList = False
self._callback.mcSdFiles(self._sdFiles)
elif 'SD printing byte' in line:
# answer to M27, at least on Marlin, Repetier and Sprinter: "SD printing byte %d/%d"
match = self._regex_sdPrintingByte.search(line)
self._currentFile.setFilepos(int(match.group(1)))
self._callback.mcProgress()
elif 'File opened' in line:
# answer to M23, at least on Marlin, Repetier and Sprinter: "File opened:%s Size:%d"
match = self._regex_sdFileOpened.search(line)
self._currentFile = PrintingSdFileInformation(match.group(1), int(match.group(2)))
elif 'File selected' in line:
# final answer to M23, at least on Marlin, Repetier and Sprinter: "File selected"
if self._currentFile is not None:
self._callback.mcFileSelected(self._currentFile.getFilename(), self._currentFile.getFilesize(), True)
eventManager().fire(Events.FILE_SELECTED, {
"file": self._currentFile.getFilename(),
"origin": self._currentFile.getFileLocation()
})
elif 'Writing to file' in line:
# anwer to M28, at least on Marlin, Repetier and Sprinter: "Writing to file: %s"
self._printSection = "CUSTOM"
self._changeState(self.STATE_PRINTING)
line = "ok"
elif 'Done printing file' in line:
# printer is reporting file finished printing
self._sdFilePos = 0
self._callback.mcPrintjobDone()
self._changeState(self.STATE_OPERATIONAL)
eventManager().fire(Events.PRINT_DONE, {
"file": self._currentFile.getFilename(),
"filename": os.path.basename(self._currentFile.getFilename()),
"origin": self._currentFile.getFileLocation(),
"time": self.getPrintTime(),
"layerCount": self._currentLayer
})
elif 'Done saving file' in line:
self.refreshSdFiles()
##~~ Message handling
elif line.strip() != '' \
and line.strip() != 'ok' and not line.startswith("wait") \
and not line.startswith('Resend:') \
and line != 'echo:Unknown command:""\n' \
and self.isOperational():
self._callback.mcMessage(line)
##~~ Parsing for feedback commands
if feedbackControls:
for name, matcher, template in feedbackControls:
if name in feedbackErrors:
# we previously had an error with that one, so we'll skip it now
continue
try:
match = matcher.search(line)
if match is not None:
formatFunction = None
if isinstance(template, str):
formatFunction = str.format
elif isinstance(template, unicode):
formatFunction = unicode.format
if formatFunction is not None:
self._callback.mcReceivedRegisteredMessage(name, formatFunction(template, *(match.groups("n/a"))))
except:
if not name in feedbackErrors:
self._logger.info("Something went wrong with feedbackControl \"%s\": " % name, exc_info=True)
feedbackErrors.append(name)
pass
##~~ Parsing for pause triggers
if pauseTriggers and not self.isStreaming():
if "enable" in pauseTriggers.keys() and pauseTriggers["enable"].search(line) is not None:
self.setPause(True)
elif "disable" in pauseTriggers.keys() and pauseTriggers["disable"].search(line) is not None:
self.setPause(False)
elif "toggle" in pauseTriggers.keys() and pauseTriggers["toggle"].search(line) is not None:
self.setPause(not self.isPaused())
if "ok" in line and self._heatingUp:
self._heatingUp = False
self._callback.mcHeatingUpUpdate(self._heatingUp)
### Baudrate detection
if self._state == self.STATE_DETECT_BAUDRATE:
if line == '' or time.time() > timeout:
if len(self._baudrateDetectList) < 1:
self.close()
self._errorValue = "No more baudrates to test, and no suitable baudrate found."
self._changeState(self.STATE_ERROR)
eventManager().fire(Events.ERROR, {"error": self.getErrorString()})
elif self._baudrateDetectRetry > 0:
self._baudrateDetectRetry -= 1
self._serial.write('\n')
self._log("Baudrate test retry: %d" % (self._baudrateDetectRetry))
self._sendCommand("M105")
self._testingBaudrate = True
else:
baudrate = self._baudrateDetectList.pop(0)
try:
self._serial.baudrate = baudrate
self._serial.timeout = settings().getFloat(["serial", "timeout", "detection"])
self._log("Trying baudrate: %d" % (baudrate))
self._baudrateDetectRetry = 5
self._baudrateDetectTestOk = 0
timeout = getNewTimeout("communication")
self._serial.write('\n')
self._sendCommand("M105")
self._testingBaudrate = True
except:
self._log("Unexpected error while setting baudrate: %d %s" % (baudrate, getExceptionString()))
elif 'ok' in line and 'T:' in line:
self._baudrateDetectTestOk += 1
if self._baudrateDetectTestOk < 10:
self._log("Baudrate test ok: %d" % (self._baudrateDetectTestOk))
self._sendCommand("M105")
else:
self._sendCommand("M999")
self._serial.timeout = settings().getFloat(["serial", "timeout", "connection"])
self._changeState(self.STATE_OPERATIONAL)
if self._sdAvailable:
self.refreshSdFiles()
else:
self.initSdCard()
eventManager().fire(Events.CONNECTED, {"port": self._port, "baudrate": self._baudrate})
else:
self._testingBaudrate = False
### Connection attempt
elif self._state == self.STATE_CONNECTING:
if (line == "" or "wait" in line) and startSeen:
if time.time() > timeout:
self.close()
else:
self._sendCommand("M105")
elif "start" in line:
startSeen = True
elif "ok" in line and startSeen:
self._changeState(self.STATE_OPERATIONAL)
if self._sdAvailable:
self.refreshSdFiles()
else:
self.initSdCard()
eventManager().fire(Events.CONNECTED, {"port": self._port, "baudrate": self._baudrate})
elif time.time() > timeout:
self.close()
### Operational
elif self._state == self.STATE_OPERATIONAL or self._state == self.STATE_PAUSED:
#Request the temperature on comm timeout (every 5 seconds) when we are not printing.
if line == "" or "wait" in line:
if self._resendDelta is not None:
self._resendNextCommand()
elif not self._commandQueue.empty():
self._sendCommand(self._commandQueue.get())
else:
self._sendCommand("M105")
tempRequestTimeout = getNewTimeout("temperature")
# resend -> start resend procedure from requested line
elif line.lower().startswith("resend") or line.lower().startswith("rs"):
if settings().get(["feature", "swallowOkAfterResend"]):
swallowOk = True
self._handleResendRequest(line)
else:
positionMatch = self._regex_M114Response.search(line)
if positionMatch:
self._positionWhenPaused = (
float(positionMatch.group(1)),
float(positionMatch.group(2)),
float(positionMatch.group(3)),
float(positionMatch.group(4))
)
if self.isPaused():
self.sendCommand("G1 F9000 X0 Y0 Z%.4f E%.4f" % (self._positionWhenPaused[2] + 5, self._positionWhenPaused[3] - 5))
### Printing
elif self._state == self.STATE_PRINTING:
if line == "" and time.time() > timeout:
self._log("Communication timeout during printing, forcing a line")
line = 'ok'
if self.isSdPrinting():
if time.time() > tempRequestTimeout and not self._heatingUp:
self._sendCommand("M105")
tempRequestTimeout = getNewTimeout("temperature")
if time.time() > sdStatusRequestTimeout and not self._heatingUp:
self._sendCommand("M27")
sdStatusRequestTimeout = getNewTimeout("sdStatus")
else:
# Even when printing request the temperature every 5 seconds.
if time.time() > tempRequestTimeout and not self.isStreaming():
self._commandQueue.put("M105")
tempRequestTimeout = getNewTimeout("temperature")
if "ok" in line and swallowOk:
swallowOk = False
elif "ok" in line:
if self._resendDelta is not None:
self._resendNextCommand()
elif not self._commandQueue.empty() and not self.isStreaming():
self._sendCommand(self._commandQueue.get(), True)
else:
self._sendNext()
elif line.lower().startswith("resend") or line.lower().startswith("rs"):
if settings().get(["feature", "swallowOkAfterResend"]):
swallowOk = True
self._handleResendRequest(line)
except:
self._logger.exception("Something crashed inside the serial connection loop, please report this to AstroPrint:")
errorMsg = "See astrobox.log for details"
self._log(errorMsg)
self._errorValue = errorMsg
self._changeState(self.STATE_ERROR)
eventManager().fire(Events.ERROR, {"error": self.getErrorString()})
self._log("Connection closed, closing down monitor")
def run(self):
profile = self._printer._profile
self._printer._heatingUp = True
self._printer.mcHeatingUpUpdate(True)
self._heatupWaitStartTime = time.time()
self._heatingTool = True
self._lastLayerHeight = 0.0
self._currentLayer = 0
try:
self._printer._comm.reset()
self._printer._comm.build_start_notification(os.path.basename(self._file['filename'])[:15])
self._printer._comm.set_build_percent(0)
self._file['start_time'] = time.time()
self._file['progress'] = 0
lastProgressReport = 0
lastProgressValueSentToPrinter = 0
lastHeatingCheck = self._file['start_time']
with open(self._file['filename'], 'rb') as f:
while True:
packet = bytearray()
try:
command = f.read(1)
if self._canceled or len(command) == 0:
break
packet.append(ord(command))
command = struct.unpack("B",command)
try:
parse = self.commandTable[command[0]]
except KeyError:
raise Exception("Unexpected packet type: 0x%x" % command[0])
if type(parse) == type(""):
packetLen = struct.calcsize(parse)
packetData = f.read(packetLen)
if len(packetData) != packetLen:
raise Exception("Packet incomplete")
else:
packetData = parse(f)
for c in packetData:
packet.append(ord(c))
if self.send_packet(packet):
self._serialLoggerEnabled and self._serialLogger.debug('{"event":"packet_sent", "data": "%s"}' % ' '.join('0x{:02x}'.format(x) for x in packet) )
now = time.time()
if now - lastProgressReport > self.UPDATE_INTERVAL_SECS:
position = f.tell()
self._file['position'] = position
self._file['progress'] = float(position) / float(self._file['size'])
self._printer.mcProgress()
printerProgress = int(self._file['progress'] * 100.0)
if lastProgressValueSentToPrinter != printerProgress:
try:
self._printer._comm.set_build_percent(printerProgress)
lastProgressValueSentToPrinter = printerProgress
lastProgressReport = now
except BufferOverflowError:
time.sleep(.2)
if self._printer._heatingUp and now - lastHeatingCheck > self.UPDATE_INTERVAL_SECS:
lastHeatingCheck = now
if ( not self._heatingPlatform or ( self._heatingPlatform and self._printer._comm.is_platform_ready(0) ) ) \
and ( not self._heatingTool or ( self._heatingTool and self._printer._comm.is_tool_ready(0) ) ):
self._heatingTool = False
self._heatingPlatform = False
self._printer._heatingUp = False
self._printer.mcHeatingUpUpdate(False)
self._heatupWaitTimeLost = now - self._heatupWaitStartTime
self._heatupWaitStartTime = now
self._file['start_time'] += self._heatupWaitTimeLost
except ProtocolError as e:
self._logger.warn('ProtocolError: %s' % e)
self._printer._comm.build_end_notification()
if self._canceled:
self._printer._comm.clear_buffer()
#Is possible to get a BufferOverflowError when succesfully completing a job
continueEndSequence = False
findAxesTries = 0
while not continueEndSequence:
try:
self._printer._comm.find_axes_maximums(['x', 'y'], 200, 10)
continueEndSequence = True
except BufferOverflowError:
if findAxesTries < 3:
time.sleep(.2)
findAxesTries += 1
else:
continueEndSequence = True
#find current z:
moveToPosition, endStopsStates = self._printer._comm.get_extended_position()
zEndStopReached = endStopsStates & 16 == 16 #endstop is a bitfield. See https://github.com/makerbot/s3g/blob/master/doc/s3gProtocol.md (command 21)
if zEndStopReached:
#calculate Z max
moveToPosition[2] = self._printer._profile.values['axes']['Z']['platform_length'] * self._printer._profile.values['axes']['Z']['steps_per_mm']
#move to the bottom:
self._printer._comm.queue_extended_point_classic(moveToPosition, 100)
self._printer._comm.toggle_axes(['x','y','z','a','b'], False)
self._printer._changeState(self._printer.STATE_OPERATIONAL)
payload = {
"file": self._file['filename'],
"filename": os.path.basename(self._file['filename']),
"origin": self._file['origin'],
"time": self._printer.getPrintTime(),
"layerCount": self._currentLayer
}
if self._canceled:
self._printer.printJobCancelled()
eventManager().fire(Events.PRINT_FAILED, payload)
self._printer._fileManager.printFailed(payload['filename'], payload['time'])
else:
self._printer.mcPrintjobDone()
self._printer._fileManager.printSucceeded(payload['filename'], payload['time'], payload['layerCount'])
eventManager().fire(Events.PRINT_DONE, payload)
except BuildCancelledError:
self._logger.warn('Build Cancel detected')
self._printer.printJobCancelled()
payload = {
"file": self._file['filename'],
"filename": os.path.basename(self._file['filename']),
"origin": self._file['origin'],
"time": self._printer.getPrintTime()
}
eventManager().fire(Events.PRINT_FAILED, payload)
self._printer._fileManager.printFailed(payload['filename'], payload['time'])
self._printer._changeState(self._printer.STATE_OPERATIONAL)
except ExternalStopError:
self._logger.warn('External Stop detected')
self._printer._comm.writer.set_external_stop(False)
self._printer.printJobCancelled()
payload = {
"file": self._file['filename'],
"filename": os.path.basename(self._file['filename']),
"origin": self._file['origin'],
"time": self._printer.getPrintTime()
}
eventManager().fire(Events.PRINT_FAILED, payload)
self._printer._fileManager.printFailed(payload['filename'], payload['time'])
self._printer._changeState(self._printer.STATE_OPERATIONAL)
except Exception as e:
self._errorValue = getExceptionString()
self._printer._changeState(self._printer.STATE_ERROR)
eventManager().fire(Events.ERROR, {"error": self._errorValue })
self._logger.error(self._errorValue)
def _connect(self):
self.changeState(State.OPENING_CONNECTION)
if self._port == "VIRTUAL":
self._serial = VirtualPrinter(read_timeout=self._readTimeout, write_timeout=self._writeTimeout)
self.changeState(State.CONNECTED)
self._transport_logger.debug("Connected to %s" % self._serial)
else:
try:
self._serial = serial.Serial(self._port, self._baudrate, timeout=self._readTimeout, writeTimeout=self._writeTimeout)
self.changeState(State.CONNECTED)
self._transport_logger.debug("Connected to %s" % self._serial)
except:
self.logError("Unexpected error while connecting to serial port: %s %s" % (self._port, getExceptionString()))
self.onError("Failed to open serial port, permissions correct?")
return False
eventManager().fire(Events.CONNECTED, {"port": self._port, "baudrate": self._baudrate})
return True
def _work(self):
import makerbot_driver.MachineFactory
s = settings()
retries = self.CONNECT_MAX_RETRIES
try:
while True:
if self.isConnected():
self._comm.close()
if retries < 0:
self._changeState(self.STATE_ERROR)
self._errorValue = "Error Connecting"
self._logger.error('Error connecting to printer.')
self._comm = None
break;
else:
try:
result = makerbot_driver.MachineFactory().build_from_port(self._port, condition= self._state_condition)
self._comm = result.s3g
self._profile = result.profile
self._gcodeParser = result.gcodeparser
version_info = self._comm.get_advanced_version()
#We should update some of the profile values with stuff retrieved from the EEPROM
axisLengths = self._comm.read_named_value_from_EEPROM('AXIS_LENGTHS_MM')
stepsPerMM = self._comm.read_named_value_from_EEPROM('AXIS_STEPS_PER_MM')
self._profile.values['axes']['X']['platform_length'] = axisLengths[0]
self._profile.values['axes']['Y']['platform_length'] = axisLengths[1]
self._profile.values['axes']['Z']['platform_length'] = axisLengths[2]
self._profile.values['axes']['A']['platform_length'] = axisLengths[3]
self._profile.values['axes']['X']['steps_per_mm'] = stepsPerMM[0]/1000000.0
self._profile.values['axes']['Y']['steps_per_mm'] = stepsPerMM[1]/1000000.0
self._profile.values['axes']['Z']['steps_per_mm'] = stepsPerMM[2]/1000000.0
self._profile.values['axes']['A']['steps_per_mm'] = -stepsPerMM[3]/1000000.0
if "B" in self._profile.values['axes']:
self._profile.values['axes']['B']['steps_per_mm'] = -stepsPerMM[4]/1000000.0
self._profile.values['axes']['B']['platform_length'] = axisLengths[4]
self._firmwareVersion = version_info['Version']
self._logger.info('Connected to Machine running version: %d, variant: 0x%x' % (self._firmwareVersion, version_info['SoftwareVariant']) )
self._changeState(self.STATE_OPERATIONAL)
s.set(['serial', 'port'], self._port)
s.save()
break
except makerbot_driver.errors.TransmissionError as e:
retries -= 1
if retries > 0:
self._logger.info('TransmissionError - Retrying. Retries left %d...' % retries)
time.sleep(.2)
except makerbot_driver.errors.UnknownResponseError as e:
retries -= 1
if retries > 0:
self._logger.info('UnknownResponseError - Retrying. Retries left %d...' % retries)
time.sleep(.2)
except makerbot_driver.errors.BuildCancelledError:
self._logger.info("Build cancelled detected. No problem")
if retries >=0:
toolHeadCount = len(self._profile.values['tools'])
while self._comm:
try:
for i in range(0, toolHeadCount):
self._temp[i] = (self._comm.get_toolhead_temperature(i), self._comm.get_toolhead_target_temperature(i))
self._bedTemp = (self._comm.get_platform_temperature(0), self._comm.get_platform_target_temperature(0))
self.mcTempUpdate(self._temp, self._bedTemp)
except makerbot_driver.BufferOverflowError:
pass
except makerbot_driver.TransmissionError:
self._logger.error('Unfortunatelly an unrecoverable error occurred between the printer and the box')
self.disconnect()
break
except makerbot_driver.BuildCancelledError:
self._logger.warn('Build cancelled detected.')
if self._printJob:
self._logger.warn('Cancelling current job.')
self._printJob.cancel()
except makerbot_driver.ProtocolError:
# It has been observed that sometimes the response comes back empty but
# in a valid package. This was in a Flash Forge running Sailfish 7.7
self._logger.warn('Badly formatted response. skipping...')
except SerialException as e:
raise e
except Exception as e:
# we shouldn't kill the thread as this is only an informational
# thread
import traceback
print traceback.format_exc()
self._logger.warn(getExceptionString())
time.sleep(self.UPDATE_INTERVAL)
except SerialException as e:
self._logger.error(e)
self._errorValue = "Serial Link failed"
self._changeState(self.STATE_ERROR)
eventManager().fire(Events.ERROR, {"error": self.getErrorString()})
self.disconnect()
def run(self):
self._printer._heatingUp = True
self._printer.mcHeatingUpUpdate(True)
self._heatupWaitStartTime = time.time()
self._heatingTool = True
self._lastLayerHeight = 0.0
self._currentLayer = 0
try:
self._printer._comm.reset()
self._printer._comm.build_start_notification(
os.path.basename(self._file['filename'])[:15])
self._printer._comm.set_build_percent(0)
self._file['start_time'] = time.time()
self._file['progress'] = 0
lastProgressReport = 0
lastProgressValueSentToPrinter = 0
lastHeatingCheck = self._file['start_time']
#Now we assume that the bed won't be clear from this point on
self._printer.set_bed_clear(False)
with open(self._file['filename'], 'rb') as f:
while True:
packet = bytearray()
try:
command = f.read(1)
if self._canceled or len(command) == 0:
break
packet.append(ord(command))
command = struct.unpack("B", command)
try:
parse = self.commandTable[command[0]]
except KeyError:
raise Exception("Unexpected packet type: 0x%x" %
command[0])
if type(parse) == type(""):
packetLen = struct.calcsize(parse)
packetData = f.read(packetLen)
if len(packetData) != packetLen:
raise Exception(
"Packet incomplete when reading command 0x%x from file"
% command[0])
else:
packetData = parse(f)
for c in packetData:
packet.append(ord(c))
if self.send_packet(packet):
self._serialLoggerEnabled and self._serialLogger.debug(
'{"event":"packet_sent", "data": "%s"}' %
' '.join('0x{:02x}'.format(x) for x in packet))
now = time.time()
if now - lastProgressReport > self.UPDATE_INTERVAL_SECS:
position = f.tell()
self._file['position'] = position
self._file['progress'] = float(
position) / float(self._file['size'])
self._printer.mcProgress()
printerProgress = int(self._file['progress'] *
100.0)
if lastProgressValueSentToPrinter != printerProgress:
try:
self._printer._comm.set_build_percent(
printerProgress)
lastProgressValueSentToPrinter = printerProgress
lastProgressReport = now
except BufferOverflowError:
time.sleep(.2)
if self._printer._heatingUp and now - lastHeatingCheck > self.UPDATE_INTERVAL_SECS:
lastHeatingCheck = now
if ( not self._heatingPlatform or ( self._heatingPlatform and self._printer._comm.is_platform_ready(0) ) ) \
and ( not self._heatingTool or ( self._heatingTool and self._printer._comm.is_tool_ready(self._printer.getSelectedTool()) ) ):
self._heatingTool = False
self._heatingPlatform = False
self._printer._heatingUp = False
self._printer.mcHeatingUpUpdate(False)
self._heatupWaitTimeLost = now - self._heatupWaitStartTime
self._heatupWaitStartTime = now
self._file[
'start_time'] += self._heatupWaitTimeLost
except ProtocolError as e:
self._logger.warn('ProtocolError: %s' % e)
self._printer._comm.build_end_notification()
if self._canceled:
self._printer._comm.clear_buffer()
#Is possible to get a BufferOverflowError when succesfully completing a job
continueEndSequence = False
findAxesTries = 0
while not continueEndSequence:
try:
self._printer._comm.find_axes_maximums(['x', 'y'], 200, 10)
continueEndSequence = True
except BufferOverflowError:
if findAxesTries < 3:
time.sleep(.2)
findAxesTries += 1
else:
continueEndSequence = True
# The ability to find out the platform length of an axis dissapeared in Sailfish 7.3 so we remove for now
#find current z:
#moveToPosition, endStopsStates = self._printer._comm.get_extended_position()
#zEndStopReached = endStopsStates & 16 == 16 #endstop is a bitfield. See https://github.com/makerbot/s3g/blob/master/doc/s3gProtocol.md (command 21)
#if zEndStopReached:
#calculate Z max
# moveToPosition[2] = self._printer._profile.values['axes']['Z']['platform_length'] * self._printer._profile.values['axes']['Z']['steps_per_mm']
#move to the bottom:
# self._printer._comm.queue_extended_point_classic(moveToPosition, 100)
self._printer._comm.toggle_axes(['x', 'y', 'z', 'a', 'b'], False)
self._printer._changeState(
self._printer.STATE_OPERATIONAL if self._printer.
isBedClear else self._printer.STATE_NOT_READY_TO_PRINT)
payload = {
"file": self._file['filename'],
"filename": os.path.basename(self._file['filename']),
"origin": self._file['origin'],
"time": self._printer.getPrintTime(),
"layerCount": self._currentLayer
}
if self._canceled:
self._printer.printJobCancelled()
eventManager().fire(Events.PRINT_FAILED, payload)
self._printer._fileManager.printFailed(payload['filename'],
payload['time'])
else:
self._printer.mcPrintjobDone()
self._printer._fileManager.printSucceeded(
payload['filename'], payload['time'],
payload['layerCount'])
eventManager().fire(Events.PRINT_DONE, payload)
except BuildCancelledError:
self._logger.warn('Build Cancel detected')
self._printer.printJobCancelled()
payload = {
"file": self._file['filename'],
"filename": os.path.basename(self._file['filename']),
"origin": self._file['origin'],
"time": self._printer.getPrintTime()
}
eventManager().fire(Events.PRINT_FAILED, payload)
self._printer._fileManager.printFailed(payload['filename'],
payload['time'])
self._printer._changeState(
self._printer.STATE_OPERATIONAL if self._printer.
isBedClear else self._printer.STATE_NOT_READY_TO_PRINT)
except ExternalStopError:
self._logger.warn('External Stop detected')
self._printer._comm.writer.set_external_stop(False)
self._printer.printJobCancelled()
payload = {
"file": self._file['filename'],
"filename": os.path.basename(self._file['filename']),
"origin": self._file['origin'],
"time": self._printer.getPrintTime()
}
eventManager().fire(Events.PRINT_FAILED, payload)
self._printer._fileManager.printFailed(payload['filename'],
payload['time'])
self._printer._changeState(
self._printer.STATE_OPERATIONAL if self._printer.
isBedClear else self._printer.STATE_NOT_READY_TO_PRINT)
except Exception as e:
self._errorValue = getExceptionString()
self._printer._changeState(self._printer.STATE_ERROR)
eventManager().fire(Events.ERROR, {"error": self._errorValue})
self._logger.error(self._errorValue)
def _work(self):
import makerbot_driver.MachineFactory
s = settings()
retries = self.CONNECT_MAX_RETRIES
try:
while True:
if self.isConnected():
self._comm.close()
if retries < 0:
self._changeState(self.STATE_ERROR)
self._errorValue = "Error Connecting"
self._logger.error('Error connecting to printer.')
self._comm = None
break
else:
try:
result = makerbot_driver.MachineFactory(
).build_from_port(self._port,
condition=self._state_condition)
self._comm = result.s3g
self._profile = result.profile
self._gcodeParser = result.gcodeparser
version_info = self._comm.get_advanced_version()
# We should update some of the profile values
# with stuff retrieved from the EEPROM
axisLengths = self._comm.read_named_value_from_EEPROM(
'AXIS_LENGTHS_MM')
stepsPerMM = self._comm.read_named_value_from_EEPROM(
'AXIS_STEPS_PER_MM')
self._profile.values['axes']['X'][
'platform_length'] = axisLengths[0]
self._profile.values['axes']['Y'][
'platform_length'] = axisLengths[1]
self._profile.values['axes']['Z'][
'platform_length'] = axisLengths[2]
self._profile.values['axes']['A'][
'platform_length'] = axisLengths[3]
self._profile.values['axes']['X'][
'steps_per_mm'] = stepsPerMM[0] / 1000000.0
self._profile.values['axes']['Y'][
'steps_per_mm'] = stepsPerMM[1] / 1000000.0
self._profile.values['axes']['Z'][
'steps_per_mm'] = stepsPerMM[2] / 1000000.0
self._profile.values['axes']['A'][
'steps_per_mm'] = -stepsPerMM[3] / 1000000.0
if "B" in self._profile.values['axes']:
self._profile.values['axes']['B'][
'steps_per_mm'] = -stepsPerMM[4] / 1000000.0
self._profile.values['axes']['B'][
'platform_length'] = axisLengths[4]
self._firmwareVersion = version_info['Version']
self._logger.info(
'Connected to Machine running version: %d, variant: 0x%x' % \
(self._firmwareVersion, version_info['SoftwareVariant']) )
self._changeState(self.STATE_OPERATIONAL)
s.set(['serial', 'port'], self._port)
s.save()
break
except makerbot_driver.errors.TransmissionError as e:
retries -= 1
if retries > 0:
self._logger.info(
'TransmissionError - Retrying. Retries left %d...'
% retries)
time.sleep(.2)
except makerbot_driver.errors.UnknownResponseError as e:
retries -= 1
if retries > 0:
self._logger.info(
'UnknownResponseError - Retrying. Retries left %d...' % \
retries)
time.sleep(.2)
except makerbot_driver.errors.BuildCancelledError:
self._logger.info(
"Build cancelled detected. No problem")
if retries >= 0:
toolHeadCount = len(self._profile.values['tools'])
while self._comm:
try:
for i in range(0, toolHeadCount):
self._temp[i] = (
self._comm.get_toolhead_temperature(i),
self._comm.get_toolhead_target_temperature(i))
self._bedTemp = (
self._comm.get_platform_temperature(0),
self._comm.get_platform_target_temperature(0))
self.mcTempUpdate(self._temp, self._bedTemp)
except makerbot_driver.BufferOverflowError:
pass
except makerbot_driver.TransmissionError:
self._logger.error(
'Unfortunatelly an unrecoverable error occurred between the printer and the box'
)
self.disconnect()
break
except makerbot_driver.BuildCancelledError:
self._logger.warn('Build cancelled detected.')
if self._printJob:
self._logger.warn('Cancelling current job.')
self._printJob.cancel()
except makerbot_driver.ProtocolError:
# It has been observed that sometimes the
# response comes back empty but in a valid package.
# This was in a Flash Forge running Sailfish 7.7
self._logger.warn(
'Badly formatted response. skipping...')
except SerialException as e:
raise e
except Exception as e:
# we shouldn't kill the thread as this is only an
# informational thread
import traceback
print traceback.format_exc()
self._logger.warn(getExceptionString())
time.sleep(self.UPDATE_INTERVAL)
except SerialException as e:
self._logger.error(e)
self._errorValue = "Serial Link failed"
self._changeState(self.STATE_ERROR)
eventManager().fire(Events.ERROR, {"error": self.getErrorString()})
self.disconnect()
def _monitor(self):
feedbackControls = settings().getFeedbackControls()
pauseTriggers = settings().getPauseTriggers()
feedbackErrors = []
#Open the serial port.
if self._port == 'AUTO':
self._changeState(self.STATE_DETECT_SERIAL)
programmer = stk500v2.Stk500v2()
self._log("Serial port list: %s" % (str(serialList())))
for p in serialList():
try:
self._log("Connecting to: %s" % (p))
programmer.connect(p)
self._serial = programmer.leaveISP()
break
except ispBase.IspError as (e):
self._log("Error while connecting to %s: %s" % (p, str(e)))
pass
except:
self._log(
"Unexpected error while connecting to serial port: %s %s"
% (p, getExceptionString()))
programmer.close()
elif self._port == 'VIRTUAL':
self._changeState(self.STATE_OPEN_SERIAL)
self._serial = VirtualPrinter()
else:
self._changeState(self.STATE_OPEN_SERIAL)
try:
self._log("Connecting to: %s" % (self._port))
if self._baudrate == 0:
self._serial = serial.Serial(str(self._port),
115200,
timeout=0.1,
writeTimeout=10000)
else:
self._serial = serial.Serial(str(self._port),
self._baudrate,
timeout=settings().getFloat([
"serial", "timeout",
"connection"
]),
writeTimeout=10000)
except:
self._log(
"Unexpected error while connecting to serial port: %s %s" %
(self._port, getExceptionString()))
if self._serial == None:
self._log("Failed to open serial port (%s)" % (self._port))
self._errorValue = 'Failed to autodetect serial port.'
self._changeState(self.STATE_ERROR)
eventManager().fire("Error", self.getErrorString())
return
self._log("Connected to: %s, starting monitor" % (self._serial))
if self._baudrate == 0:
self._changeState(self.STATE_DETECT_BAUDRATE)
else:
self._changeState(self.STATE_CONNECTING)
#Start monitoring the serial port.
timeout = getNewTimeout("communication")
tempRequestTimeout = timeout
sdStatusRequestTimeout = timeout
startSeen = not settings().getBoolean(
["feature", "waitForStartOnConnect"])
heatingUp = False
swallowOk = False
while True:
try:
line = self._readline()
if line == None:
break
##~~ Error handling
# No matter the state, if we see an error, goto the error state and store the error for reference.
if line.startswith('Error:'):
#Oh YEAH, consistency.
# Marlin reports an MIN/MAX temp error as "Error:x\n: Extruder switched off. MAXTEMP triggered !\n"
# But a bed temp error is reported as "Error: Temperature heated bed switched off. MAXTEMP triggered !!"
# So we can have an extra newline in the most common case. Awesome work people.
if self._regex_minMaxError.match(line):
line = line.rstrip() + self._readline()
#Skip the communication errors, as those get corrected.
if 'checksum mismatch' in line \
or 'Wrong checksum' in line \
or 'Line Number is not Last Line Number' in line \
or 'expected line' in line \
or 'No Line Number with checksum' in line \
or 'No Checksum with line number' in line \
or 'Missing checksum' in line:
pass
elif not self.isError():
self._errorValue = line[6:]
self._changeState(self.STATE_ERROR)
eventManager().fire("Error", self.getErrorString())
##~~ SD file list
# if we are currently receiving an sd file list, each line is just a filename, so just read it and abort processing
if self._sdFileList and not 'End file list' in line:
self._sdFiles.append(line.strip().lower())
continue
##~~ Temperature processing
if ' T:' in line or line.startswith('T:'):
try:
self._temp = float(
self._regex_float.search(
line.split('T:')[1]).group(0))
if ' B:' in line:
self._bedTemp = float(
self._regex_float.search(
line.split(' B:')[1]).group(0))
self._callback.mcTempUpdate(self._temp, self._bedTemp,
self._targetTemp,
self._bedTargetTemp)
except ValueError:
# catch conversion issues, we'll rather just not get the temperature update instead of killing the connection
pass
#If we are waiting for an M109 or M190 then measure the time we lost during heatup, so we can remove that time from our printing time estimate.
if not 'ok' in line:
heatingUp = True
if self._heatupWaitStartTime != 0:
t = time.time()
self._heatupWaitTimeLost = t - self._heatupWaitStartTime
self._heatupWaitStartTime = t
##~~ SD Card handling
elif 'SD init fail' in line:
self._sdAvailable = False
self._sdFiles = []
self._callback.mcSdStateChange(self._sdAvailable)
elif 'Not SD printing' in line:
if self.isSdFileSelected() and self.isPrinting():
# something went wrong, printer is reporting that we actually are not printing right now...
self._sdFilePos = 0
self._changeState(self.STATE_OPERATIONAL)
elif 'SD card ok' in line:
self._sdAvailable = True
self.refreshSdFiles()
self._callback.mcSdStateChange(self._sdAvailable)
elif 'Begin file list' in line:
self._sdFiles = []
self._sdFileList = True
elif 'End file list' in line:
self._sdFileList = False
self._callback.mcSdFiles(self._sdFiles)
elif 'SD printing byte' in line:
# answer to M27, at least on Marlin, Repetier and Sprinter: "SD printing byte %d/%d"
match = self._regex_sdPrintingByte.search(
"([0-9]*)/([0-9]*)", line)
self._currentFile.setFilepos(int(match.group(1)))
self._callback.mcProgress()
elif 'File opened' in line:
# answer to M23, at least on Marlin, Repetier and Sprinter: "File opened:%s Size:%d"
match = self._regex_sdFileOpened.search(line)
self._currentFile = PrintingSdFileInformation(
match.group(1), int(match.group(2)))
elif 'File selected' in line:
# final answer to M23, at least on Marlin, Repetier and Sprinter: "File selected"
self._callback.mcFileSelected(
self._currentFile.getFilename(),
self._currentFile.getFilesize(), True)
eventManager().fire("FileSelected",
self._currentFile.getFilename())
elif 'Writing to file' in line:
# anwer to M28, at least on Marlin, Repetier and Sprinter: "Writing to file: %s"
self._changeState(self.STATE_PRINTING)
line = "ok"
elif 'Done printing file' in line:
# printer is reporting file finished printing
self._sdFilePos = 0
self._callback.mcPrintjobDone()
self._changeState(self.STATE_OPERATIONAL)
eventManager().fire("PrintDone")
##~~ Message handling
elif line.strip() != '' and line.strip(
) != 'ok' and not line.startswith(
"wait"
) and not line.startswith(
'Resend:'
) and line != 'echo:Unknown command:""\n' and self.isOperational(
):
self._callback.mcMessage(line)
##~~ Parsing for feedback commands
if feedbackControls:
for name, matcher, template in feedbackControls:
try:
match = matcher.search(line)
if match is not None:
format = None
if isinstance(template, str):
format = str.format
elif isinstance(template, unicode):
format = unicode.format
if format is not None:
self._callback.mcReceivedRegisteredMessage(
name,
format(template,
*(match.groups("n/a"))))
except:
if not name in feedbackErrors:
self._logger.info(
"Something went wrong with feedbackControl \"%s\": "
% name,
exc_info=True)
feedbackErrors.append(name)
pass
##~~ Parsing for pause triggers
if pauseTriggers and not self.isStreaming():
if "enable" in pauseTriggers.keys(
) and pauseTriggers["enable"].search(line) is not None:
self.setPause(True)
elif "disable" in pauseTriggers.keys(
) and pauseTriggers["disable"].search(line) is not None:
self.setPause(False)
elif "toggle" in pauseTriggers.keys(
) and pauseTriggers["toggle"].search(line) is not None:
self.setPause(not self.isPaused())
if "ok" in line and heatingUp:
heatingUp = False
### Baudrate detection
if self._state == self.STATE_DETECT_BAUDRATE:
if line == '' or time.time() > timeout:
if len(self._baudrateDetectList) < 1:
self.close()
self._errorValue = "No more baudrates to test, and no suitable baudrate found."
self._changeState(self.STATE_ERROR)
eventManager().fire("Error", self.getErrorString())
elif self._baudrateDetectRetry > 0:
self._baudrateDetectRetry -= 1
self._serial.write('\n')
self._log("Baudrate test retry: %d" %
(self._baudrateDetectRetry))
self._sendCommand("M105")
self._testingBaudrate = True
else:
baudrate = self._baudrateDetectList.pop(0)
try:
self._serial.baudrate = baudrate
self._serial.timeout = settings().getFloat(
["serial", "timeout", "detection"])
self._log("Trying baudrate: %d" % (baudrate))
self._baudrateDetectRetry = 5
self._baudrateDetectTestOk = 0
timeout = getNewTimeout("communication")
self._serial.write('\n')
self._sendCommand("M105")
self._testingBaudrate = True
except:
self._log(
"Unexpected error while setting baudrate: %d %s"
% (baudrate, getExceptionString()))
elif 'ok' in line and 'T:' in line:
self._baudrateDetectTestOk += 1
if self._baudrateDetectTestOk < 10:
self._log("Baudrate test ok: %d" %
(self._baudrateDetectTestOk))
self._sendCommand("M105")
else:
self._sendCommand("M999")
self._serial.timeout = settings().getFloat(
["serial", "timeout", "connection"])
self._changeState(self.STATE_OPERATIONAL)
if self._sdAvailable:
self.refreshSdFiles()
eventManager().fire(
"Connected",
"%s at %s baud" % (self._port, self._baudrate))
else:
self._testingBaudrate = False
### Connection attempt
elif self._state == self.STATE_CONNECTING:
if (line == "" or "wait" in line) and startSeen:
self._sendCommand("M105")
elif "start" in line:
startSeen = True
elif "ok" in line and startSeen:
self._changeState(self.STATE_OPERATIONAL)
if self._sdAvailable:
self.refreshSdFiles()
eventManager().fire(
"Connected",
"%s at %s baud" % (self._port, self._baudrate))
elif time.time() > timeout:
self.close()
### Operational
elif self._state == self.STATE_OPERATIONAL or self._state == self.STATE_PAUSED:
#Request the temperature on comm timeout (every 5 seconds) when we are not printing.
if line == "" or "wait" in line:
if self._resendDelta is not None:
self._resendNextCommand()
elif not self._commandQueue.empty():
self._sendCommand(self._commandQueue.get())
else:
self._sendCommand("M105")
tempRequestTimeout = getNewTimeout("communication")
# resend -> start resend procedure from requested line
elif line.lower().startswith(
"resend") or line.lower().startswith("rs"):
if settings().get(["feature", "swallowOkAfterResend"]):
swallowOk = True
self._handleResendRequest(line)
### Printing
elif self._state == self.STATE_PRINTING:
if line == "" and time.time() > timeout:
self._log(
"Communication timeout during printing, forcing a line"
)
line = 'ok'
if self.isSdPrinting():
if time.time() > tempRequestTimeout and not heatingUp:
self._sendCommand("M105")
tempRequestTimeout = getNewTimeout("communication")
if time.time(
) > sdStatusRequestTimeout and not heatingUp:
self._sendCommand("M27")
sdStatusRequestTimeout = time.time() + 1
if 'ok' or 'SD printing byte' in line:
timeout = getNewTimeout("communication")
else:
# Even when printing request the temperature every 5 seconds.
if time.time(
) > tempRequestTimeout and not self.isStreaming():
self._commandQueue.put("M105")
tempRequestTimeout = getNewTimeout("communication")
if "ok" in line and swallowOk:
swallowOk = False
elif "ok" in line:
timeout = getNewTimeout("communication")
if self._resendDelta is not None:
self._resendNextCommand()
elif not self._commandQueue.empty(
) and not self.isStreaming():
self._sendCommand(self._commandQueue.get())
else:
self._sendNext()
elif line.lower().startswith(
"resend") or line.lower().startswith("rs"):
if settings().get(
["feature", "swallowOkAfterResend"]):
swallowOk = True
self._handleResendRequest(line)
except:
self._logger.exception(
"Something crashed inside the serial connection loop, please report this in OctoPrint's bug tracker:"
)
errorMsg = "See octoprint.log for details"
self._log(errorMsg)
self._errorValue = errorMsg
self._changeState(self.STATE_ERROR)
eventManager().fire("Error", self.getErrorString())
self._log("Connection closed, closing down monitor")
def _monitor(self):
feedbackControls = settings().getFeedbackControls()
pauseTriggers = settings().getPauseTriggers()
feedbackErrors = []
#Open the serial port.
if not self._openSerial():
return
self._log("Connected to: %s, starting monitor" % self._serial)
if self._baudrate == 0:
self._log("Starting baud rate detection")
self._changeState(self.STATE_DETECT_BAUDRATE)
else:
self._changeState(self.STATE_CONNECTING)
#Start monitoring the serial port.
timeout = getNewTimeout("communication")
tempRequestTimeout = getNewTimeout("temperature")
sdStatusRequestTimeout = getNewTimeout("sdStatus")
startSeen = not settings().getBoolean(["feature", "waitForStartOnConnect"])
heatingUp = False
swallowOk = False
supportRepetierTargetTemp = settings().getBoolean(["feature", "repetierTargetTemp"])
while True:
try:
line = self._readline()
if line is None:
break
if line.strip() is not "":
timeout = getNewTimeout("communication")
##~~ Error handling
line = self._handleErrors(line)
##~~ SD file list
# if we are currently receiving an sd file list, each line is just a filename, so just read it and abort processing
if self._sdFileList and isGcodeFileName(line.strip().lower()) and not 'End file list' in line:
filename = line.strip().lower()
if filterNonAscii(filename):
self._logger.warn("Got a file from printer's SD that has a non-ascii filename (%s), that shouldn't happen according to the protocol" % filename)
else:
self._sdFiles.append(filename)
continue
##~~ Temperature processing
if ' T:' in line or line.startswith('T:') or ' T0:' in line or line.startswith('T0:'):
self._processTemperatures(line)
self._callback.mcTempUpdate(self._temp, self._bedTemp)
#If we are waiting for an M109 or M190 then measure the time we lost during heatup, so we can remove that time from our printing time estimate.
if not 'ok' in line:
heatingUp = True
if self._heatupWaitStartTime != 0:
t = time.time()
self._heatupWaitTimeLost = t - self._heatupWaitStartTime
self._heatupWaitStartTime = t
elif supportRepetierTargetTemp:
matchExtr = self._regex_repetierTempExtr.match(line)
matchBed = self._regex_repetierTempBed.match(line)
if matchExtr is not None:
toolNum = int(matchExtr.group(1))
try:
target = float(matchExtr.group(2))
if toolNum in self._temp.keys() and self._temp[toolNum] is not None and isinstance(self._temp[toolNum], tuple):
(actual, oldTarget) = self._temp[toolNum]
self._temp[toolNum] = (actual, target)
else:
self._temp[toolNum] = (None, target)
self._callback.mcTempUpdate(self._temp, self._bedTemp)
except ValueError:
pass
elif matchBed is not None:
try:
target = float(matchBed.group(1))
if self._bedTemp is not None and isinstance(self._bedTemp, tuple):
(actual, oldTarget) = self._bedTemp
self._bedTemp = (actual, target)
else:
self._bedTemp = (None, target)
self._callback.mcTempUpdate(self._temp, self._bedTemp)
except ValueError:
pass
##~~ SD Card handling
elif 'SD init fail' in line or 'volume.init failed' in line or 'openRoot failed' in line:
self._sdAvailable = False
self._sdFiles = []
self._callback.mcSdStateChange(self._sdAvailable)
elif 'Not SD printing' in line:
if self.isSdFileSelected() and self.isPrinting():
# something went wrong, printer is reporting that we actually are not printing right now...
self._sdFilePos = 0
self._changeState(self.STATE_OPERATIONAL)
elif 'SD card ok' in line and not self._sdAvailable:
self._sdAvailable = True
self.refreshSdFiles()
self._callback.mcSdStateChange(self._sdAvailable)
elif 'Begin file list' in line:
self._sdFiles = []
self._sdFileList = True
elif 'End file list' in line:
self._sdFileList = False
self._callback.mcSdFiles(self._sdFiles)
elif 'SD printing byte' in line:
# answer to M27, at least on Marlin, Repetier and Sprinter: "SD printing byte %d/%d"
match = self._regex_sdPrintingByte.search(line)
self._currentFile.setFilepos(int(match.group(1)))
self._callback.mcProgress()
elif 'File opened' in line:
# answer to M23, at least on Marlin, Repetier and Sprinter: "File opened:%s Size:%d"
match = self._regex_sdFileOpened.search(line)
self._currentFile = PrintingSdFileInformation(match.group(1), int(match.group(2)))
elif 'File selected' in line:
# final answer to M23, at least on Marlin, Repetier and Sprinter: "File selected"
if self._currentFile is not None:
self._callback.mcFileSelected(self._currentFile.getFilename(), self._currentFile.getFilesize(), True)
eventManager().fire(Events.FILE_SELECTED, {
"file": self._currentFile.getFilename(),
"origin": self._currentFile.getFileLocation()
})
elif 'Writing to file' in line:
# anwer to M28, at least on Marlin, Repetier and Sprinter: "Writing to file: %s"
self._printSection = "CUSTOM"
self._changeState(self.STATE_PRINTING)
line = "ok"
elif 'Done printing file' in line:
# printer is reporting file finished printing
self._sdFilePos = 0
self._callback.mcPrintjobDone()
self._changeState(self.STATE_OPERATIONAL)
eventManager().fire(Events.PRINT_DONE, {
"file": self._currentFile.getFilename(),
"filename": os.path.basename(self._currentFile.getFilename()),
"origin": self._currentFile.getFileLocation(),
"time": self.getPrintTime()
})
elif 'Done saving file' in line:
self.refreshSdFiles()
##~~ Message handling
elif line.strip() != '' \
and line.strip() != 'ok' and not line.startswith("wait") \
and not line.startswith('Resend:') \
and line != 'echo:Unknown command:""\n' \
and self.isOperational():
self._callback.mcMessage(line)
##~~ Parsing for feedback commands
if feedbackControls:
for name, matcher, template in feedbackControls:
if name in feedbackErrors:
# we previously had an error with that one, so we'll skip it now
continue
try:
match = matcher.search(line)
if match is not None:
formatFunction = None
if isinstance(template, str):
formatFunction = str.format
elif isinstance(template, unicode):
formatFunction = unicode.format
if formatFunction is not None:
self._callback.mcReceivedRegisteredMessage(name, formatFunction(template, *(match.groups("n/a"))))
except:
if not name in feedbackErrors:
self._logger.info("Something went wrong with feedbackControl \"%s\": " % name, exc_info=True)
feedbackErrors.append(name)
pass
##~~ Parsing for pause triggers
if pauseTriggers and not self.isStreaming():
if "enable" in pauseTriggers.keys() and pauseTriggers["enable"].search(line) is not None:
self.setPause(True)
elif "disable" in pauseTriggers.keys() and pauseTriggers["disable"].search(line) is not None:
self.setPause(False)
elif "toggle" in pauseTriggers.keys() and pauseTriggers["toggle"].search(line) is not None:
self.setPause(not self.isPaused())
if "ok" in line and heatingUp:
heatingUp = False
### Baudrate detection
if self._state == self.STATE_DETECT_BAUDRATE:
if line == '' or time.time() > timeout:
if len(self._baudrateDetectList) < 1:
self.close()
self._errorValue = "No more baudrates to test, and no suitable baudrate found."
self._changeState(self.STATE_ERROR)
eventManager().fire(Events.ERROR, {"error": self.getErrorString()})
elif self._baudrateDetectRetry > 0:
self._baudrateDetectRetry -= 1
self._serial.write('\n')
self._log("Baudrate test retry: %d" % (self._baudrateDetectRetry))
self._sendCommand("M105")
self._testingBaudrate = True
else:
baudrate = self._baudrateDetectList.pop(0)
try:
self._serial.baudrate = baudrate
self._serial.timeout = settings().getFloat(["serial", "timeout", "detection"])
self._log("Trying baudrate: %d" % (baudrate))
self._baudrateDetectRetry = 5
self._baudrateDetectTestOk = 0
timeout = getNewTimeout("communication")
self._serial.write('\n')
self._sendCommand("M105")
self._testingBaudrate = True
except:
self._log("Unexpected error while setting baudrate: %d %s" % (baudrate, getExceptionString()))
elif 'ok' in line and 'T:' in line:
self._baudrateDetectTestOk += 1
if self._baudrateDetectTestOk < 10:
self._log("Baudrate test ok: %d" % (self._baudrateDetectTestOk))
self._sendCommand("M105")
else:
self._sendCommand("M999")
self._serial.timeout = settings().getFloat(["serial", "timeout", "connection"])
self._changeState(self.STATE_OPERATIONAL)
if self._sdAvailable:
self.refreshSdFiles()
else:
self.initSdCard()
eventManager().fire(Events.CONNECTED, {"port": self._port, "baudrate": self._baudrate})
else:
self._testingBaudrate = False
### Connection attempt
elif self._state == self.STATE_CONNECTING:
if (line == "" or "wait" in line) and startSeen:
self._sendCommand("M105")
elif "start" in line:
startSeen = True
elif "ok" in line and startSeen:
self._changeState(self.STATE_OPERATIONAL)
if self._sdAvailable:
self.refreshSdFiles()
else:
self.initSdCard()
eventManager().fire(Events.CONNECTED, {"port": self._port, "baudrate": self._baudrate})
elif time.time() > timeout:
self.close()
### Operational
elif self._state == self.STATE_OPERATIONAL or self._state == self.STATE_PAUSED:
#Request the temperature on comm timeout (every 5 seconds) when we are not printing.
if line == "" or "wait" in line:
if self._resendDelta is not None:
self._resendNextCommand()
elif not self._commandQueue.empty():
self._sendCommand(self._commandQueue.get())
else:
self._sendCommand("M105")
tempRequestTimeout = getNewTimeout("temperature")
# resend -> start resend procedure from requested line
elif line.lower().startswith("resend") or line.lower().startswith("rs"):
if settings().get(["feature", "swallowOkAfterResend"]):
swallowOk = True
self._handleResendRequest(line)
### Printing
elif self._state == self.STATE_PRINTING:
if line == "" and time.time() > timeout:
self._log("Communication timeout during printing, forcing a line")
line = 'ok'
if self.isSdPrinting():
if time.time() > tempRequestTimeout and not heatingUp:
self._sendCommand("M105")
tempRequestTimeout = getNewTimeout("temperature")
if time.time() > sdStatusRequestTimeout and not heatingUp:
self._sendCommand("M27")
sdStatusRequestTimeout = getNewTimeout("sdStatus")
else:
# Even when printing request the temperature every 5 seconds.
if time.time() > tempRequestTimeout and not self.isStreaming():
self._commandQueue.put("M105")
tempRequestTimeout = getNewTimeout("temperature")
if "ok" in line and swallowOk:
swallowOk = False
elif "ok" in line:
if self._resendDelta is not None:
self._resendNextCommand()
elif not self._commandQueue.empty() and not self.isStreaming():
self._sendCommand(self._commandQueue.get())
else:
self._sendNext()
elif line.lower().startswith("resend") or line.lower().startswith("rs"):
if settings().get(["feature", "swallowOkAfterResend"]):
swallowOk = True
self._handleResendRequest(line)
except:
self._logger.exception("Something crashed inside the serial connection loop, please report this in OctoPrint's bug tracker:")
errorMsg = "See octoprint.log for details"
self._log(errorMsg)
self._errorValue = errorMsg
self._changeState(self.STATE_ERROR)
eventManager().fire(Events.ERROR, {"error": self.getErrorString()})
self._log("Connection closed, closing down monitor")
def _monitor(self):
feedbackControls = settings().getFeedbackControls()
pauseTriggers = settings().getPauseTriggers()
feedbackErrors = []
#Open the serial port.
if not self._openSerial():
return
self._log("Connected to: %s, starting monitor" % self._serial)
if self._baudrate == 0:
self._log("Starting baud rate detection")
self._changeState(self.STATE_DETECT_BAUDRATE)
else:
self._changeState(self.STATE_CONNECTING)
#Start monitoring the serial port.
timeout = getNewTimeout("communication")
tempRequestTimeout = timeout
sdStatusRequestTimeout = timeout
startSeen = not settings().getBoolean(["feature", "waitForStartOnConnect"])
heatingUp = False
swallowOk = False
while True:
try:
line = self._readline()
if line is None:
break
##~~ Error handling
line = self._handleErrors(line)
##~~ SD file list
# if we are currently receiving an sd file list, each line is just a filename, so just read it and abort processing
if self._sdFileList and isGcodeFileName(line.strip().lower()) and not 'End file list' in line:
filename = line.strip().lower()
if filterNonAscii(filename):
self._logger.warn("Got a file from printer's SD that has a non-ascii filename (%s), that shouldn't happen according to the protocol" % filename)
else:
self._sdFiles.append(filename)
continue
##~~ Temperature processing
if ' T:' in line or line.startswith('T:'):
try:
self._temp = float(self._regex_float.search(line.split('T:')[1]).group(0))
if ' B:' in line:
self._bedTemp = float(self._regex_float.search(line.split(' B:')[1]).group(0))
self._callback.mcTempUpdate(self._temp, self._bedTemp, self._targetTemp, self._bedTargetTemp)
except ValueError:
# catch conversion issues, we'll rather just not get the temperature update instead of killing the connection
pass
#If we are waiting for an M109 or M190 then measure the time we lost during heatup, so we can remove that time from our printing time estimate.
if not 'ok' in line:
heatingUp = True
if self._heatupWaitStartTime != 0:
t = time.time()
self._heatupWaitTimeLost = t - self._heatupWaitStartTime
self._heatupWaitStartTime = t
##~~ SD Card handling
elif 'SD init fail' in line or 'volume.init failed' in line or 'openRoot failed' in line:
self._sdAvailable = False
self._sdFiles = []
self._callback.mcSdStateChange(self._sdAvailable)
elif 'Not SD printing' in line:
if self.isSdFileSelected() and self.isPrinting():
# something went wrong, printer is reporting that we actually are not printing right now...
self._sdFilePos = 0
self._changeState(self.STATE_OPERATIONAL)
elif 'SD card ok' in line:
self._sdAvailable = True
self.refreshSdFiles()
self._callback.mcSdStateChange(self._sdAvailable)
elif 'Begin file list' in line:
self._sdFiles = []
self._sdFileList = True
elif 'End file list' in line:
self._sdFileList = False
self._callback.mcSdFiles(self._sdFiles)
elif 'SD printing byte' in line:
# answer to M27, at least on Marlin, Repetier and Sprinter: "SD printing byte %d/%d"
match = self._regex_sdPrintingByte.search(line)
self._currentFile.setFilepos(int(match.group(1)))
self._callback.mcProgress()
elif 'File opened' in line:
# answer to M23, at least on Marlin, Repetier and Sprinter: "File opened:%s Size:%d"
match = self._regex_sdFileOpened.search(line)
self._currentFile = PrintingSdFileInformation(match.group(1), int(match.group(2)))
elif 'File selected' in line:
# final answer to M23, at least on Marlin, Repetier and Sprinter: "File selected"
if self._currentFile is not None:
self._callback.mcFileSelected(self._currentFile.getFilename(), self._currentFile.getFilesize(), True)
eventManager().fire("FileSelected", self._currentFile.getFilename())
elif 'Writing to file' in line:
# anwer to M28, at least on Marlin, Repetier and Sprinter: "Writing to file: %s"
self._changeState(self.STATE_PRINTING)
line = "ok"
elif 'Done printing file' in line:
# printer is reporting file finished printing
self._sdFilePos = 0
self._callback.mcPrintjobDone()
self._changeState(self.STATE_OPERATIONAL)
eventManager().fire("PrintDone")
elif 'Done saving file' in line:
self.refreshSdFiles()
##~~ Message handling
elif line.strip() != '' \
and line.strip() != 'ok' and not line.startswith("wait") \
and not line.startswith('Resend:') \
and line != 'echo:Unknown command:""\n' \
and self.isOperational():
self._callback.mcMessage(line)
##~~ Parsing for feedback commands
if feedbackControls:
for name, matcher, template in feedbackControls:
if name in feedbackErrors:
# we previously had an error with that one, so we'll skip it now
continue
try:
match = matcher.search(line)
if match is not None:
formatFunction = None
if isinstance(template, str):
formatFunction = str.format
elif isinstance(template, unicode):
formatFunction = unicode.format
if formatFunction is not None:
self._callback.mcReceivedRegisteredMessage(name, formatFunction(template, *(match.groups("n/a"))))
except:
if not name in feedbackErrors:
self._logger.info("Something went wrong with feedbackControl \"%s\": " % name, exc_info=True)
feedbackErrors.append(name)
pass
##~~ Parsing for pause triggers
if pauseTriggers and not self.isStreaming():
if "enable" in pauseTriggers.keys() and pauseTriggers["enable"].search(line) is not None:
self.setPause(True)
elif "disable" in pauseTriggers.keys() and pauseTriggers["disable"].search(line) is not None:
self.setPause(False)
elif "toggle" in pauseTriggers.keys() and pauseTriggers["toggle"].search(line) is not None:
self.setPause(not self.isPaused())
if "ok" in line and heatingUp:
heatingUp = False
### Baudrate detection
if self._state == self.STATE_DETECT_BAUDRATE:
if line == '' or time.time() > timeout:
if len(self._baudrateDetectList) < 1:
self.close()
self._errorValue = "No more baudrates to test, and no suitable baudrate found."
self._changeState(self.STATE_ERROR)
eventManager().fire("Error", self.getErrorString())
elif self._baudrateDetectRetry > 0:
self._baudrateDetectRetry -= 1
self._serial.write('\n')
self._log("Baudrate test retry: %d" % (self._baudrateDetectRetry))
self._sendCommand("M105")
self._testingBaudrate = True
else:
baudrate = self._baudrateDetectList.pop(0)
try:
self._serial.baudrate = baudrate
self._serial.timeout = settings().getFloat(["serial", "timeout", "detection"])
self._log("Trying baudrate: %d" % (baudrate))
self._baudrateDetectRetry = 5
self._baudrateDetectTestOk = 0
timeout = getNewTimeout("communication")
self._serial.write('\n')
self._sendCommand("M105")
self._testingBaudrate = True
except:
self._log("Unexpected error while setting baudrate: %d %s" % (baudrate, getExceptionString()))
elif 'ok' in line and 'T:' in line:
self._baudrateDetectTestOk += 1
if self._baudrateDetectTestOk < 10:
self._log("Baudrate test ok: %d" % (self._baudrateDetectTestOk))
self._sendCommand("M105")
else:
self._sendCommand("M999")
self._serial.timeout = settings().getFloat(["serial", "timeout", "connection"])
self._changeState(self.STATE_OPERATIONAL)
if self._sdAvailable:
self.refreshSdFiles()
eventManager().fire("Connected", "%s at %s baud" % (self._port, self._baudrate))
else:
self._testingBaudrate = False
### Connection attempt
elif self._state == self.STATE_CONNECTING:
if (line == "" or "wait" in line) and startSeen:
self._sendCommand("M105")
elif "start" in line:
startSeen = True
elif "ok" in line and startSeen:
self._changeState(self.STATE_OPERATIONAL)
if not self._sdAvailable:
self.initSdCard()
eventManager().fire("Connected", "%s at %s baud" % (self._port, self._baudrate))
elif time.time() > timeout:
self.close()
### Operational
elif self._state == self.STATE_OPERATIONAL or self._state == self.STATE_PAUSED:
#Request the temperature on comm timeout (every 5 seconds) when we are not printing.
if line == "" or "wait" in line:
if self._resendDelta is not None:
self._resendNextCommand()
elif not self._commandQueue.empty():
self._sendCommand(self._commandQueue.get())
else:
self._sendCommand("M105")
tempRequestTimeout = getNewTimeout("communication")
# resend -> start resend procedure from requested line
elif line.lower().startswith("resend") or line.lower().startswith("rs"):
if settings().get(["feature", "swallowOkAfterResend"]):
swallowOk = True
self._handleResendRequest(line)
### Printing
elif self._state == self.STATE_PRINTING:
if line == "" and time.time() > timeout:
self._log("Communication timeout during printing, forcing a line")
line = 'ok'
if self.isSdPrinting():
if time.time() > tempRequestTimeout and not heatingUp:
self._sendCommand("M105")
tempRequestTimeout = getNewTimeout("communication")
if time.time() > sdStatusRequestTimeout and not heatingUp:
self._sendCommand("M27")
sdStatusRequestTimeout = time.time() + 1
if 'ok' or 'SD printing byte' in line:
timeout = getNewTimeout("communication")
else:
# Even when printing request the temperature every 5 seconds.
if time.time() > tempRequestTimeout and not self.isStreaming():
self._commandQueue.put("M105")
tempRequestTimeout = getNewTimeout("communication")
if "ok" in line and swallowOk:
swallowOk = False
elif "ok" in line:
timeout = getNewTimeout("communication")
if self._resendDelta is not None:
self._resendNextCommand()
elif not self._commandQueue.empty() and not self.isStreaming():
self._sendCommand(self._commandQueue.get())
else:
self._sendNext()
elif line.lower().startswith("resend") or line.lower().startswith("rs"):
if settings().get(["feature", "swallowOkAfterResend"]):
swallowOk = True
self._handleResendRequest(line)
except:
self._logger.exception("Something crashed inside the serial connection loop, please report this in OctoPrint's bug tracker:")
errorMsg = "See octoprint.log for details"
self._log(errorMsg)
self._errorValue = errorMsg
self._changeState(self.STATE_ERROR)
eventManager().fire("Error", self.getErrorString())
self._log("Connection closed, closing down monitor")