Пример #1
0
            
        if vVerbose.startswith('test'):
            #print getInfoText("Status")
            print '##### - #####'

        #threadCreateFile('/var/sensorTool/www/sensor.php', getHTML())
        threadCreateFile('/var/sensorTool/www/sensor.csv', getCSVSensor(),  'csv')
        threadCreateFile('/var/sensorTool/www/module.csv', getCSVModules(),  'csv')
        threadCreateFile('/var/sensorTool/www/fa.csv', getCSVfa(),  'csv')
        strAlarm = 'False'
        if boolInfoLight:
            strAlarm = 'True'
        threadCreateFile('/var/sensorTool/www/alarm.csv', strAlarm,  'csv')
#        thread.start_new_thread(threadCreatePHPFile, ('/var/sensorTool/www/sensor.php', getHTML(),))        

        plotting_DeviceValues(dictActiveModules,  '1_Modules',  vVerbose)
        plotting_DeviceValues(dictTemperature, '3_Temperature',  vVerbose,  -20,  50)
        plotting_DeviceValues(dictRelativeHumidity, '4_Relative_Humidity',  vVerbose)
        plotting_DeviceValues(dictAbsoluteHumidity, '2_Absolute_Humidity',  vVerbose,  0,  30)
        plotting_DeviceValues(dictPressure, '9_Pressure',  vVerbose,  700,  1100)
        
#        thread.start_new_thread(plotting, (dictPlotSens, dictPlotAussen, vVerbose,))
          
        refreshTime_sensors = time.time() + INTERVAL_SENSORS
    sleep(1) # 0.1

if RadiatorStarted:
    dictActors[dictSensors[iControlSensor].GetFritzActor()].SetActor(False)

#sendWhatsApps(dictSensors[iControlSensor].GetMobiles(), getInfoText("Inactive - going down"))
if vVerbose.startswith('test'):
Пример #2
0
                False)
            #LedR.off()
            #LedY.off()
            RadiatorStarted = False
            sendWhatsApps(dictSensors[iControlSensor].GetMobiles(),
                          getInfoText("Stopped"))
            sH_Log.Add('Radiator deactivated')

        if vVerbose.startswith('test'):
            #print getInfoText("Status")
            print '##### - #####'

        threadCreatePHPFile('/var/sensorTool/www/sensor.php', getHTML())
        #        thread.start_new_thread(threadCreatePHPFile, ('/var/sensorTool/www/sensor.php', getHTML(),))

        plotting_DeviceValues(dictActiveModules, '1_Modules', vVerbose)
        plotting_DeviceValues(dictTemperature, '3_Temperature', vVerbose, -20,
                              50)
        plotting_DeviceValues(dictRelativeHumidity, '4_Relative_Humidity',
                              vVerbose)
        plotting_DeviceValues(dictAbsoluteHumidity, '2_Absolute_Humidity',
                              vVerbose, 0, 30)
        plotting_DeviceValues(dictPressure, '9_Pressure', vVerbose, 700, 1100)

        #        thread.start_new_thread(plotting, (dictPlotSens, dictPlotAussen, vVerbose,))

        refreshTime_sensors = time.time() + INTERVAL_SENSORS
    sleep(1)  # 0.1

if RadiatorStarted:
    dictActors[dictSensors[iControlSensor].GetFritzActor()].SetActor(False)
Пример #3
0
def threadLogic(in_q, boolRunQ, vVerbose=''):
    vVerbose = str(sys.argv[1])
    if vVerbose.startswith('test'):
        print 'sensorService starting'
    sConfig = sensorConfig('/home/pi/sensorTool/sensorTool.conf', vVerbose)
    sensorSwitches('/home/pi/sensorTool/switches.conf', vVerbose)

    # GPIO Settings BCM Layout
    #RelayIN1 = gpio.GPIOout(sConfig.getGPIORelayIN1())
    #RelayIN2 = gpio.GPIOout(sConfig.getGPIORelayIN2())
    #LedG = gpio.GPIOout(sConfig.getGPIOLedGreen())
    #LedY = gpio.GPIOout(sConfig.getGPIOLedYellow())
    #LedR = gpio.GPIOout(sConfig.getGPIOLedRed())
    BMelder = gpio.GPIOin(sConfig.getGPIOmotion())
    Leuchte = sensorLight(sConfig.getGPIOlight())

    # Start state
    #LedG.on()
    #LedY.on()
    #LedR.on()
    boolLeuchte = False

    # constants -------------------------------------------------------------------
    sCrypt = sensorCrypt(sConfig.getCryptKey())
    MAXTIME = sConfig.getMaxTime()
    MINTIME = sConfig.getMinTime()
    INTERVAL_SENSORS = sConfig.getIntervalSensors()
    INTERVAL_FRITZACTORS = sConfig.getIntervalActors()
    INTERVAL_WEBRADIO = sConfig.getIntervalWebradio()
    INTERVAL_LANDEVICES = sConfig.getIntervalLANDevices()
    SERVER = sConfig.getServer()

    TriggerCountA = sConfig.getTriggerCountA()
    TriggerCountB = sConfig.getTriggerCountB()

    #dictInterval = {}
    dictInterval = sensorInterval(sConfig.getDictIntervalle())

    vTitel = sConfig.getTitel()

    dictActors = {}
    dictSensors = {}
    dictSensors = sConfig.getDictSensors()
    iControlSensor = sConfig.getiControlSensor()
    iOutdoorSensor = sConfig.getiOutdoorSensor()
    boolOutdoorSensor = False
    if iOutdoorSensor is not None:
        boolOutdoorSensor = True
    sH_Log = sensorHistory('/var/sensorTool/www/loglatestentry.php',
                           '/var/sensorTool/www/logdata.php')
    iLog = 0

    modules_webradio = sConfig.getModuleWebradio()  # ok
    webradio_active = False
    modules_webradiomotion = sConfig.getModuleWebradiomotion()  # ok
    webradio_motionTimeOut = sConfig.getIntervalWebradiomotion()
    webradio_motionActive = True
    modules_surveillance = sConfig.getModuleSurveillance()  # ok
    modules_motiondetector = sConfig.getModuleMotiondetector()
    motion_detected = False
    motion_detected_report = False
    ledalarm = False

    modules_radiators = sConfig.getModuleRadiators()  # ok
    RadiatorStarted = False
    modules_relais = sConfig.getModuleRelais()
    modules_fritzactors = sConfig.getModuleFritzActors()  # ok
    modules_LANDevices = sConfig.getModuleLANDevices()  # ok
    LANDevices_Present = False
    LANNetwork = sConfig.getLANNetwork()
    dictMobileHosts = sConfig.getdictMobileHosts()

    sConfig.SetupDynamicConfig('/var/sensorTool/www/dynamic.conf')

    dictActiveModules = {}
    dictActiveModules['time'] = list()
    dictActiveModules['Motiondetector'] = moduleDevice(20)
    dictActiveModules['NetworkDeviceDetector'] = moduleDevice(30)
    dictActiveModules['Webradio'] = moduleDevice(40)
    dictActiveModules['Radiators'] = moduleDevice(60)
    dictActiveModules['ledalarm'] = moduleDevice(90)

    dictTemperature = {}
    dictTemperature['time'] = list()
    dictRelativeHumidity = {}
    dictRelativeHumidity['time'] = list()
    dictAbsoluteHumidity = {}
    dictAbsoluteHumidity['time'] = list()
    dictPressure = {}
    dictPressure['time'] = list()

    for vKey in dictSensors:
        sSensorName = dictSensors[vKey].GetSensor()
        dictTemperature[sSensorName] = moduleDevice(0)
        dictRelativeHumidity[sSensorName] = moduleDevice(0)
        dictAbsoluteHumidity[sSensorName] = moduleDevice(0)
        if dictSensors[vKey].GetBME():
            dictPressure[sSensorName] = moduleDevice(0)

    if vVerbose == 'test':
        print 'MAXTIME' + str(MAXTIME)
        print 'MINTIME' + str(MINTIME)
        print 'INTERVAL_SENSORS' + str(INTERVAL_SENSORS)
        print 'INTERVAL_FRITZACTORS' + str(INTERVAL_FRITZACTORS)
        print 'INTERVAL_WEBRADIO' + str(INTERVAL_WEBRADIO)
        print 'INTERVAL_LANDEVICES' + str(INTERVAL_LANDEVICES)
        print 'webradio_motionTimeOut' + str(webradio_motionTimeOut)
        sleep(1)

    # Config Variable leeren
    sConfig = None

    vBoolLC = True
    # fritz off moved after first fritzactors call

    degC = 0
    hPa = 0
    hRel = 0
    degC1 = 0
    hPa1 = 0
    vBoolSensor1 = True
    counterHigh = 0
    counterLow = 0
    timeDuration = 0

    # functions for print out and WhatsApp
    def getInfoText(vStatus):
        vHeader = vTitel
        if vVerbose.startswith('test'):
            vHeader += ' Test\n'
        else:
            vHeader += '\n'

        vNow = datetime.datetime.now().strftime(
            '%Y-%m-%d %H:%M:%S') + ' ' + vStatus
        vSensorPaket = ''
        for vKey in dictSensors:
            vSensorPaket += '\n ' + str(dictSensors[vKey].GetInfo(
                False, False))

        vActorsPaket = ''
        for vAKey in dictActors:
            vActorsPaket += '\n' + str(dictActors[vAKey].GetInfo(False, False))

        vGPIOStatus = ''
        #    vGPIOStatus += '\n Relais: ' + str(RadiatorStarted) + ' (' + str(RelayIN1.isOn) + '|' + str(RelayIN2.isOn) + ')'
        vGPIOStatus += '\n Code:   ' + str(timeDuration) + ';' + str(
            counterHigh) + ';' + str(counterLow)
        #    vGPIOStatus += '\n LED:    ' + str(LedG.isOn) + str(LedY.isOn) + str(LedR.isOn)
        vReturnText = vHeader + vNow + vSensorPaket + vActorsPaket + vGPIOStatus  # + str(dictActors)
        return vReturnText

    # print CSV
#    def getInfoCSV():
#        vReturnText = datetime.datetime.now().strftime('%Y-%m-%d %H:%M:%S') + ';'
#        vReturnText = vReturnText + str(RelaisStarted) + ';'
#        vReturnText = vReturnText + str(timeDuration) + ';' + str(counterHigh) + ';' + str(counterLow) + ";"
#        vReturnText = vReturnText + str(RelayIN1.isOn) + str(RelayIN2.isOn) + ";"
#        vReturnText = vReturnText + str(LedG.isOn) + str(LedY.isOn) + str(LedR.isOn) + ";"
#
#        for vKey in dictSensors:
#            vReturnText = vReturnText + str(dictSensors[vKey].GetInfo(True, False))
#        return vReturnText

# print html status output

    def getHTML():
        vhttpResult = ''
        vhttpResult += 'echo "<DIV class=\\"sensor\\"><TABLE class=\\"sensor\\"><TR>\\n";\n'
        vhttpResult += 'echo "<TD>\\n";\n'
        for vKey in dictSensors:
            vhttpResult += dictSensors[vKey].GetHttpTable()

        vhttpResult += 'echo "</TD>\\n";\n'
        vhttpResult += 'echo "<TD>\\n";\n'

        for vKey in dictActiveModules:
            if vKey <> 'time':
                vhttpResult += dictActiveModules[vKey].GetHttpTable(vKey)

        if modules_fritzactors:
            for vAKey in dictActors:
                vhttpResult += dictActors[vAKey].GetHttpTable()

        vhttpResult += 'echo "</TD></TR></TABLE></DIV>\\n";\n'
        return vhttpResult

    # find out private ip address -------------------------------------------------
#    ip = [(s.connect(('8.8.8.8', 80)), s.getsockname()[0], s.close()) for s in [socket.socket(socket.AF_INET, socket.SOCK_DGRAM)]][0][1]
# init  -----------------------------------------------------------------------

# refresh for sensor data
    refreshTime_sensors = time.time() + INTERVAL_SENSORS
    # refresh for fritz actors
    refreshTime_fritzactors = time.time()

    refreshTime_webradio = time.time()
    refreshTime_motiondetector = time.time()
    # refresh for Queue

    # if vVerbose.startswith('test'):
    #     INTERVAL_LANDEVICES = 3
    refreshTime_LANDevices = time.time() + INTERVAL_LANDEVICES
    qNDD = Queue.LifoQueue(maxsize=1)
    DiscoveryInProgress = False
    refreshTime_Queue = 5
    INTERVAL_QUEUE = 5
    refreshTime_webradioMotion = time.time() + webradio_motionTimeOut
    qSensors = Queue.LifoQueue()
    #qSensors = Queue.LifoQueue(maxsize=1)
    thread.start_new_thread(threadSensors, (qSensors, vVerbose))
    if vVerbose.startswith('test'):
        print 'MT: Starting Thread1.Sensors'
    # FAInProgress = False
    # qFA = Queue.LifoQueue(maxsize=1)

    # loop ------------------------------------------------------------------------
    #LedR.off()
    if vVerbose.startswith('test1'):
        print 'Config loaded'
        print str(refreshTime_sensors) + '##' + str(time.time())

    while time.strftime('%H%M') < MAXTIME:
        # Check NDD Queue every INTERVAL_LANDEVICES secs
        if time.time() > refreshTime_Queue:
            if vVerbose.startswith('test'):
                print str(time.time()) + 'while: refreshTime_Queue (' + str(
                    refreshTime_Queue) + ')'
            if not qNDD.empty():
                #dictNetDevs = {}
                #dictNetDevs = qNDD.get()
                boolNDD = qNDD.get()
                LANDevices_Present = boolNDD
                if vVerbose.startswith('test'):
                    print str(
                        time.time()
                    ) + 'while: refreshTime_Queue: NDD (True) : LANDevices_Present (' + str(
                        LANDevices_Present) + ')'
                qNDD.task_done()
                DiscoveryInProgress = False

            refreshTime_Queue = time.time() + INTERVAL_QUEUE

        if time.time() > refreshTime_motiondetector:
            if vVerbose.startswith('test1'):
                print str(
                    time.time()) + 'while: refreshTime_motiondetector (' + str(
                        refreshTime_motiondetector) + ')'
            if modules_motiondetector:
                if vVerbose.startswith('test1'):
                    print str(
                        time.time()
                    ) + 'while: refreshTime_motiondetector: modules_motiondetector'
                if BMelder.status() == 1:
                    motion_detected = True
                    motion_detected_report = True
                else:
                    motion_detected = False
                if vVerbose.startswith('test1'):
                    print str(
                        time.time()
                    ) + 'while: refreshTime_motiondetector: modules_motiondetector: motion_detected_report(' + str(
                        motion_detected_report) + ')'

            if modules_surveillance and modules_motiondetector:
                if vVerbose.startswith('test1'):
                    print str(
                        time.time()
                    ) + 'while: refreshTime_motiondetector: modules_surveillance, modules_motiondetector'
                if not LANDevices_Present:
                    if motion_detected:
                        threadPICAM2('surveillance')
                        sH_Log.Add(' surveillance take picset ')
                else:
                    threadPICAM2('low')
                    sH_Log.Add(' surveillance take pic low ')

            refreshTime_motiondetector = time.time() + 1

        if time.time() > refreshTime_LANDevices:
            if vVerbose.startswith('test1'):
                print str(
                    time.time()) + 'while: refreshTime_LANDevices (' + str(
                        refreshTime_LANDevices) + ')'
            if modules_LANDevices:
                if vVerbose.startswith('test1'):
                    print str(time.time(
                    )) + 'while: refreshTime_LANDevices: modules_LANDevices'
                #parallel with threading and queue
                if not DiscoveryInProgress:
                    if vVerbose.startswith('test1'):
                        print str(
                            time.time()
                        ) + 'while: refreshTime_LANDevices: modules_LANDevices: Start Network Device Discovery!'
                    thread.start_new_thread(
                        threadNetDiscovery,
                        (qNDD, LANNetwork, dictMobileHosts))
                    DiscoveryInProgress = True
                else:
                    if vVerbose.startswith('test1'):
                        print 'Discovery running'

            refreshTime_LANDevices = time.time() + INTERVAL_LANDEVICES

        # get fritz actor data
        if time.time() > refreshTime_fritzactors:
            if vVerbose.startswith('test1'):
                print str(
                    time.time()) + 'while: refreshTime_fritzactors (' + str(
                        refreshTime_fritzactors) + ')'
            if modules_fritzactors:
                if vVerbose.startswith('test1'):
                    print str(time.time(
                    )) + 'while: refreshTime_fritzactors: modules_fritzactors'
                dictActors = threadFritzActors2()

                # On Startup stop running radiators
                if vBoolLC:  # and not FAInProgress:
                    dictActors[str(
                        dictSensors[iControlSensor].GetFritzActor())].SetActor(
                            False)
            refreshTime_fritzactors = time.time() + INTERVAL_FRITZACTORS

        # Check if there is a webradio setting change
        if time.time() > refreshTime_webradio:
            if vVerbose.startswith('test'):
                print str(time.time()) + 'while: refreshTime_webradio (' + str(
                    refreshTime_webradio) + ')'

            if modules_webradio:
                if vVerbose.startswith('test'):
                    print str(time.time(
                    )) + 'while: refreshTime_webradio: modules_webradio'
                (webradio_active1, webradio_changed,
                 webradio_result) = threadWebradioService(
                     '/var/sensorTool/www/webradio.station', webradio_active)
                if webradio_changed:
                    if webradio_active <> webradio_active1:
                        webradio_active = webradio_active1
                    sH_Log.Add(' Webradio change: ' + str(webradio_result))
            elif not modules_webradio and webradio_active:
                if vVerbose.startswith('test'):
                    print str(
                        time.time()
                    ) + 'while: refreshTime_webradio: not modules_webradio, webradio_active'
                (webradio_active, webradio_changed,
                 webradio_result) = threadWebradioService(
                     '/var/sensorTool/www/webradio.station', webradio_active,
                     True)
                sH_Log.Add(' Webradio stopped')

            if webradio_motionActive and not webradio_active and modules_webradio and modules_webradiomotion:
                if vVerbose.startswith('test'):
                    print str(
                        time.time()
                    ) + 'while: refreshTime_webradio: webradio_motionActive, webradio_active, modules_webradio, modules_webradiomotion'
                refreshTime_webradioMotion = time.time(
                ) + webradio_motionTimeOut
                (webradio_active, webradio_changed,
                 webradio_result) = threadWebradioService(
                     '/var/sensorTool/www/webradio.station', webradio_active,
                     False, True)
                sH_Log.Add(' Webradio started')

            refreshTime_webradio = time.time() + INTERVAL_WEBRADIO

        #print 'time '+str(time.time())+'>'+str(refreshTime_webradioMotion)+' refreshTime_webradioMotion'
        # Timeout for webradio - stop when no motion is detected (active motioncontrol)
        if time.time() > refreshTime_webradioMotion:
            if vVerbose.startswith('test'):
                print str(
                    time.time()) + 'while: refreshTime_webradioMotion (' + str(
                        refreshTime_webradioMotion) + ')'
                #print str(time.time())+'while: refreshTime_webradioMotion: modules_webradio ('+str(modules_webradio)+'), modules_webradiomotion ('+str(modules_webradiomotion)+'), not webradio_motionActive('+str(webradio_motionActive)+')'
            if modules_webradio and modules_webradiomotion and not webradio_motionActive and webradio_active:
                if vVerbose.startswith('test'):
                    print str(
                        time.time()
                    ) + 'while: refreshTime_webradioMotion: modules_webradio (' + str(
                        modules_webradio
                    ) + '), modules_webradiomotion (' + str(
                        modules_webradiomotion
                    ) + '), not webradio_motionActive(' + str(
                        webradio_motionActive) + '), webradio_active (' + str(
                            webradio_active) + ')'
                (webradio_active, webradio_changed,
                 webradio_result) = threadWebradioService(
                     '/var/sensorTool/www/webradio.station', webradio_active,
                     True)
                sH_Log.Add(' Webradio stopped, no motion')
            refreshTime_webradioMotion = time.time() + INTERVAL_WEBRADIO

        # every 10 seconds, try to send data to servers
        if time.time() > refreshTime_sensors:
            if vVerbose.startswith('test'):
                print str(time.time()) + 'while: refreshTime_sensors (' + str(
                    refreshTime_sensors) + ')'
                print str(refreshTime_sensors) + '##' + str(time.time())
            # print str(refreshTime2) + '##' + str(time.time())
            # Werte holen per http request ::D
            try:
                vR = None
                if not in_q.empty():
                    vR = in_q.get()
                    in_q.task_done()

                dictResponse = {}
                dictResponse = ast.literal_eval(str(vR))
                if vVerbose == 'test1':
                    print dictResponse
                for vSensor in dictResponse:
                    dictTemp = {}
                    dictTemp['ID'] = vSensor
                    if 'Time' in dictResponse[vSensor]:
                        dictTemp['Time'] = dictResponse[vSensor]['Time']
                    if 'RH' in dictResponse[vSensor]:
                        dictTemp['RH'] = dictResponse[vSensor]['RH']
                    if 'T' in dictResponse[vSensor]:
                        dictTemp['T'] = dictResponse[vSensor]['T']
                    if 'hPa' in dictResponse[vSensor]:
                        dictTemp['hPa'] = dictResponse[vSensor]['hPa']

                    boolBME280 = False
                    if (vSensor == 'bme280'):
                        boolBME280 = True

                    for vKey in dictSensors:
                        if dictSensors[vKey].GetHex() == vSensor:
                            dictSensors[vKey].SetSensorData(
                                dictTemp, boolBME280)

                #DeviceMotion.SetSensorData(motion_detected_report)
                if modules_webradiomotion:

                    if motion_detected_report:
                        # if motion detected than increase refreshTime_webradioMotion by webradio_motionTimeOut
                        webradio_motionActive = True
                        refreshTime_webradioMotion = time.time(
                        ) + webradio_motionTimeOut
                        print refreshTime_webradioMotion
                    else:

                        # no motion detected, but mobile device present, webradio must be acticve
                        if modules_LANDevices and LANDevices_Present:
                            webradio_motionActive = True
                            refreshTime_webradioMotion = time.time(
                            ) + webradio_motionTimeOut
                            print refreshTime_webradioMotion
                        else:
                            webradio_motionActive = False

                # Values for Diagramm

                sPlottingTime = str(
                    datetime.datetime.now().strftime('%Y-%m-%d %H:%M:%S'))
                dictTemperature['time'].append(sPlottingTime)
                dictRelativeHumidity['time'].append(sPlottingTime)
                dictAbsoluteHumidity['time'].append(sPlottingTime)
                dictPressure['time'].append(sPlottingTime)
                for vKey in dictSensors:
                    sSensorName = dictSensors[vKey].GetSensor()
                    dictTemperature[sSensorName].SetModuleValue(
                        dictSensors[vKey].GetT())
                    dictRelativeHumidity[sSensorName].SetModuleValue(
                        dictSensors[vKey].GetRH())
                    dictAbsoluteHumidity[sSensorName].SetModuleValue(
                        dictSensors[vKey].GetAH())
                    if dictSensors[vKey].GetBME():
                        dictPressure[sSensorName].SetModuleValue(
                            dictSensors[vKey].GetPA())

                dictActiveModules['time'].append(sPlottingTime)
                dictActiveModules['Motiondetector'].SetModuleStatus(
                    motion_detected_report)
                dictActiveModules['NetworkDeviceDetector'].SetModuleStatus(
                    LANDevices_Present)
                dictActiveModules['Webradio'].SetModuleStatus(webradio_active)
                dictActiveModules['Radiators'].SetModuleStatus(RadiatorStarted)
                dictActiveModules['ledalarm'].SetModuleStatus(ledalarm)
                motion_detected_report = False
                ledalarm = False

            except Exception as e:
                sH_Log.Add(str(e))
                print e
                # pass

            # ############### Dynamic Config  Start ###################
            # Dynamische Config einlesen #soll ueber http request gesteuert werden.
            dynamicConf = ConfigParser.ConfigParser()
            dynamicConf.read('/var/sensorTool/www/dynamic.conf')
            # Try to change the Relais Status
            try:
                if vVerbose.startswith('test'):
                    print str(time.time()
                              ) + 'while: refreshTime_sensors: dynamicConf'

                if dynamicConf.getboolean(
                        'modules', 'modules_radiators') != modules_radiators:
                    modules_radiators = dynamicConf.getboolean(
                        'modules', 'modules_radiators')
                    sH_Log.Add(' modules_radiators set to ' +
                               str(modules_radiators))
                    if vVerbose.startswith('test'):
                        print str(
                            time.time()
                        ) + 'while: refreshTime_sensors: dynamicConf: modules_radiators(' + str(
                            modules_radiators) + ')'

                if dynamicConf.getboolean(
                        'modules',
                        'modules_motiondetector') != modules_motiondetector:
                    modules_motiondetector = dynamicConf.getboolean(
                        'modules', 'modules_motiondetector')
                    sH_Log.Add(' modules_motiondetector set to ' +
                               str(modules_motiondetector))
                    if not modules_motiondetector and motion_detected:
                        motion_detected = False
                        motion_detected_report = False
                    if vVerbose.startswith('test'):
                        print str(
                            time.time()
                        ) + 'while: refreshTime_sensors: dynamicConf: modules_motiondetector(' + str(
                            modules_motiondetector) + ')'

                if dynamicConf.getboolean(
                        'modules',
                        'modules_surveillance') != modules_surveillance:
                    modules_surveillance = dynamicConf.getboolean(
                        'modules', 'modules_surveillance')
                    sH_Log.Add(' modules_surveillance set to ' +
                               str(modules_surveillance))
                    if not modules_surveillance and motion_detected:
                        motion_detected = False
                    if vVerbose.startswith('test'):
                        print str(
                            time.time()
                        ) + 'while: refreshTime_sensors: dynamicConf: modules_surveillance(' + str(
                            modules_surveillance) + ')'
                    if modules_surveillance and not modules_motiondetector:
                        sH_Log.Add(' modules_motiondetector set to ' +
                                   str(modules_motiondetector))
                        modules_motiondetector = True
                        if vVerbose.startswith('test'):
                            print str(
                                time.time()
                            ) + 'while: refreshTime_sensors: dynamicConf: modules_surveillance: modules_motiondetector(' + str(
                                modules_motiondetector) + ')'

                if dynamicConf.getboolean('modules',
                                          'modules_relais') != modules_relais:
                    modules_relais = dynamicConf.getboolean(
                        'modules', 'modules_relais')
                    sH_Log.Add(' modules_relais set to ' + str(modules_relais))
                    if vVerbose.startswith('test'):
                        print str(
                            time.time()
                        ) + 'while: refreshTime_sensors: dynamicConf: modules_relais(' + str(
                            modules_relais) + ')'

                if dynamicConf.getboolean(
                        'modules',
                        'modules_fritzactors') != modules_fritzactors:
                    modules_fritzactors = dynamicConf.getboolean(
                        'modules', 'modules_fritzactors')
                    sH_Log.Add(' modules_fritzactors set to ' +
                               str(modules_fritzactors))
                    if vVerbose.startswith('test'):
                        print str(
                            time.time()
                        ) + 'while: refreshTime_sensors: dynamicConf: modules_fritzactors(' + str(
                            modules_fritzactors) + ')'

                if dynamicConf.getboolean(
                        'modules', 'modules_LANDevices') != modules_LANDevices:
                    modules_LANDevices = dynamicConf.getboolean(
                        'modules', 'modules_LANDevices')
                    sH_Log.Add(' modules_LANDevices set to ' +
                               str(modules_LANDevices))
                    if not modules_LANDevices and LANDevices_Present:
                        LANDevices_Present = False
                    if vVerbose.startswith('test'):
                        print str(
                            time.time()
                        ) + 'while: refreshTime_sensors: dynamicConf: modules_LANDevices(' + str(
                            modules_LANDevices) + ')'

                if dynamicConf.getboolean(
                        'modules', 'modules_webradio') != modules_webradio:
                    modules_webradio = dynamicConf.getboolean(
                        'modules', 'modules_webradio')
                    sH_Log.Add(' modules_webradio set to ' +
                               str(modules_webradio))
                    if vVerbose.startswith('test'):
                        print str(
                            time.time()
                        ) + 'while: refreshTime_sensors: dynamicConf: modules_webradio(' + str(
                            modules_webradio) + ')'

                if dynamicConf.getboolean(
                        'modules',
                        'modules_webradiomotion') != modules_webradiomotion:
                    modules_webradiomotion = dynamicConf.getboolean(
                        'modules', 'modules_webradiomotion')
                    sH_Log.Add(' modules_webradiomotion set to ' +
                               str(modules_webradiomotion))
                    if not modules_webradiomotion and not webradio_motionActive:
                        webradio_motionActive = True
                    if vVerbose.startswith('test'):
                        print str(
                            time.time()
                        ) + 'while: refreshTime_sensors: dynamicConf: modules_webradiomotion(' + str(
                            modules_webradiomotion) + ')'
                    if modules_webradiomotion and not modules_webradio:
                        sH_Log.Add(' modules_webradio set to ' +
                                   str(modules_webradio))
                        modules_webradio = True
                        if vVerbose.startswith('test'):
                            print str(
                                time.time()
                            ) + 'while: refreshTime_sensors: dynamicConf: modules_webradiomotion: modules_webradio(' + str(
                                modules_webradio) + ')'

            except Exception as e:
                sH_Log.Add(str(e))
                print e
                pass

            # iterate through sensor data
            for vKey in dictSensors:
                try:
                    vSetHighRH = False
                    if dictSensors[vKey].GetThresholdHighHumidity() == False:
                        vSetHighRH = True
                    elif dynamicConf.getfloat(
                            'Sensor' + str(vKey), 'threshold_high_humidity'
                    ) != dictSensors[vKey].GetThresholdHighHumidity():
                        vSetHighRH = True

                    if vSetHighRH:
                        dictSensors[vKey].SetThresholdHighHumidity(
                            dynamicConf.getfloat('Sensor' + str(vKey),
                                                 'threshold_high_humidity'))
                        sH_Log.Add(
                            'Threshold High RH S' + str(vKey) + ':' +
                            str(dictSensors[vKey].GetThresholdHighHumidity()))
                        if vVerbose.startswith('test'):
                            print 'Threshold High RH S' + str(vKey) + ':' + str(
                                dictSensors[vKey].GetThresholdHighHumidity())

                except:
                    pass  # Exception, e:

                try:
                    vSetLowT = False
                    if dictSensors[vKey].GetThresholdLowTemperature() == False:
                        vSetLowT = True
                    elif dynamicConf.getfloat(
                            'Sensor' + str(vKey), 'threshold_low_temperature'
                    ) != dictSensors[vKey].GetThresholdLowTemperature():
                        vSetLowT = True

                    if vSetHighRH:
                        dictSensors[vKey].SetThresholdLowTemperature(
                            dynamicConf.getfloat('Sensor' + str(vKey),
                                                 'threshold_low_temperature'))
                        sH_Log.Add('Threshold Low T S' + str(vKey) + ':' + str(
                            dictSensors[vKey].GetThresholdLowTemperature()))
                        if vVerbose == 'test':
                            print 'Threshold Low T S' + str(vKey) + ':' + str(
                                dictSensors[vKey].GetThresholdLowTemperature())

                except:
                    pass  # Exception, e:

            # ############### Dynamic Config  Ende ###################

            if vBoolLC == True:
                sendWhatsApps(dictSensors[iControlSensor].GetMobiles(),
                              getInfoText("Active"))
                sH_Log.Add('sensorTool started')
                #LedY.off()
                vBoolLC = False

            # ############### Check for Radiator interval  start ##################
            vBoolInterval = dictInterval.isNowInInterval()
            # ############### Check for Radiator interval  Ende ##################

            if vVerbose.startswith('test1'):
                print('Threshold: ' +
                      str(dictSensors[iControlSensor].GetThreshold()) +
                      ' RadiatorStarted: ' + str(RadiatorStarted) +
                      ' vBoolInterval: ' + str(vBoolInterval) +
                      ' modules_radiators: ' + str(modules_radiators))

            boolTriggerOutdoor = True
            if boolOutdoorSensor:
                deltaAH = 0.5
                if dictSensors[iControlSensor].GetAH(
                ) is not None and dictSensors[iOutdoorSensor].GetAH(
                ) is not None:
                    if (float(dictSensors[iControlSensor].GetAH())) < (float(
                            dictSensors[iOutdoorSensor].GetAH()) + deltaAH):
                        boolTriggerOutdoor = False

            if dictSensors[iControlSensor].GetThreshold(
            ) and RadiatorStarted == False and vBoolInterval and modules_radiators and boolTriggerOutdoor:
                counterHigh = counterHigh + 1
                #if LedY.isOn == False:
                #    LedY.on()
                #    sH_Log.Add(dictSensors[iControlSensor].GetSensor() + ' Yellow LED (H)!')
            else:
                counterHigh = 0

            if dictSensors[iControlSensor].GetThreshold(
            ) == False and RadiatorStarted and vBoolInterval and modules_radiators and boolTriggerOutdoor:
                counterLow = counterLow + 1
                #if LedY.isOn == False:
                #    LedY.on()
                #    sH_Log.Add(dictSensors[iControlSensor].GetSensor() + ' Yellow LED (L)!')
            else:
                counterLow = 0

            if vVerbose.startswith('test1'):
                print('counterLow: ' + str(counterLow) + ' counterHigh: ' +
                      str(counterHigh))

            boolInfoLight = False
            # Alle anderen Sensoren (außer Keller) durchgehen
            for vKey in dictSensors:
                # if dictSensors[vKey].GetBME() != True:
                if iControlSensor <> vKey:
                    vBoolThreshold = dictSensors[vKey].GetThreshold()

                    # Grenzwert
                    if vBoolThreshold and dictSensors[vKey].GetSendMessage():
                        sendWhatsApps(dictSensors[vKey].GetMobiles(),
                                      dictSensors[vKey].GetMessage())
                        dictSensors[vKey].SetSendMessage(False)
                        sH_Log.Add(dictSensors[vKey].GetSensor() +
                                   dictSensors[vKey].GetMessage())
                        boolInfoLight = True
                    elif dictSensors[vKey].GetSendMessage() == False:
                        dictSensors[vKey].SetSendMessage(True)

                    # Delta
                    vBoolDelta = dictSensors[vKey].GetDelta()
                    counterDelta = dictSensors[vKey].GetDeltaCounter()
                    if vBoolDelta and dictSensors[vKey].GetDeltaCounter() == 0:
                        dictSensors[vKey].SetDeltaCounter(counterDelta + 1)
                    elif counterDelta > 0:
                        if counterDelta > dictSensors[vKey].GetTriggerCount():
                            sendWhatsApps(dictSensors[vKey].GetMobiles(),
                                          dictSensors[vKey].GetDeltaMessage())
                            sH_Log.Add(dictSensors[vKey].GetDeltaMessage())
                            dictSensors[vKey].SetDeltaCounter(0)
                            boolInfoLight = True
                        else:
                            dictSensors[vKey].SetDeltaCounter(counterDelta + 1)

            if boolInfoLight:
                if not boolLeuchte:
                    boolLeuchte = Leuchte.activate(boolLeuchte)
                    ledalarm = True
            else:
                if boolLeuchte:
                    boolLeuchte = Leuchte.deactivate(boolLeuchte)

            if counterHigh == TriggerCountA and RadiatorStarted == False and vBoolInterval and modules_radiators and boolTriggerOutdoor:
                dictActors[
                    dictSensors[iControlSensor].GetFritzActor()].SetActor(True)
                #LedR.on()
                #LedY.off()
                RadiatorStarted = True
                sendWhatsApps(dictSensors[iControlSensor].GetMobiles(),
                              getInfoText("Started"))
                sH_Log.Add('Radiator activated')
            elif (counterLow == TriggerCountB or vBoolInterval == False
                  or modules_radiators == False
                  or boolTriggerOutdoor == False) and RadiatorStarted:
                dictActors[dictSensors[iControlSensor].GetFritzActor(
                )].SetActor(False)
                #LedR.off()
                #LedY.off()
                RadiatorStarted = False
                sendWhatsApps(dictSensors[iControlSensor].GetMobiles(),
                              getInfoText("Stopped"))
                sH_Log.Add('Radiator deactivated')

            if vVerbose.startswith('test'):
                #print getInfoText("Status")
                print '##### - #####'

            threadCreatePHPFile('/var/sensorTool/www/sensor.php', getHTML())
            #        thread.start_new_thread(threadCreatePHPFile, ('/var/sensorTool/www/sensor.php', getHTML(),))

            plotting_DeviceValues(dictActiveModules, '1_Modules', vVerbose)
            plotting_DeviceValues(dictTemperature, '3_Temperature', vVerbose,
                                  -20, 50)
            plotting_DeviceValues(dictRelativeHumidity, '4_Relative_Humidity',
                                  vVerbose)
            plotting_DeviceValues(dictAbsoluteHumidity, '2_Absolute_Humidity',
                                  vVerbose, 0, 30)
            plotting_DeviceValues(dictPressure, '9_Pressure', vVerbose, 700,
                                  1100)

            #        thread.start_new_thread(plotting, (dictPlotSens, dictPlotAussen, vVerbose,))

            refreshTime_sensors = time.time() + INTERVAL_SENSORS
        sleep(1)  # 0.1

    if RadiatorStarted:
        dictActors[dictSensors[iControlSensor].GetFritzActor()].SetActor(False)

    sendWhatsApps(dictSensors[iControlSensor].GetMobiles(),
                  getInfoText("Inactive - going down"))
    if vVerbose.startswith('test'):
        print 'GPIO Down'
    #LedY.off()
    #LedR.off()
    #LedG.off()
    if boolLeuchte:
        Leuchte.deactivate(boolLeuchte)

    if not vVerbose.startswith('test'):
        os.system("sudo init 0")
    else:
        print ' - Ende - '


# vim: tabstop=8 expandtab shiftwidth=4 softtabstop=4
Пример #4
0
def threadLogic(in_q, boolRunQ, vVerbose=''):
    vVerbose = str(sys.argv[1])
    if vVerbose.startswith('test'):
        print 'sensorService starting'
    sConfig = sensorConfig('/home/pi/sensorTool/sensorTool.conf', vVerbose)
    sensorSwitches('/home/pi/sensorTool/switches.conf', vVerbose);
    
    # GPIO Settings BCM Layout
    #RelayIN1 = gpio.GPIOout(sConfig.getGPIORelayIN1())
    #RelayIN2 = gpio.GPIOout(sConfig.getGPIORelayIN2())
    #LedG = gpio.GPIOout(sConfig.getGPIOLedGreen())
    #LedY = gpio.GPIOout(sConfig.getGPIOLedYellow())
    #LedR = gpio.GPIOout(sConfig.getGPIOLedRed())
    BMelder = gpio.GPIOin(sConfig.getGPIOmotion())
    Leuchte = sensorLight(sConfig.getGPIOlight())
    
    # Start state
    #LedG.on()
    #LedY.on()
    #LedR.on()
    boolLeuchte = False
    
    # constants -------------------------------------------------------------------
    sCrypt = sensorCrypt(sConfig.getCryptKey())
    MAXTIME = sConfig.getMaxTime() 
    MINTIME = sConfig.getMinTime() 
    INTERVAL_SENSORS = sConfig.getIntervalSensors()
    INTERVAL_FRITZACTORS = sConfig.getIntervalActors()
    INTERVAL_WEBRADIO = sConfig.getIntervalWebradio()
    INTERVAL_LANDEVICES = sConfig.getIntervalLANDevices()
    SERVER = sConfig.getServer()
    
    TriggerCountA = sConfig.getTriggerCountA()
    TriggerCountB = sConfig.getTriggerCountB()
    
    #dictInterval = {}
    dictInterval = sensorInterval(sConfig.getDictIntervalle())
    
    vTitel = sConfig.getTitel()
    
    dictActors = {}    
    dictSensors = {}
    dictSensors = sConfig.getDictSensors()
    iControlSensor = sConfig.getiControlSensor()
    iOutdoorSensor = sConfig.getiOutdoorSensor()
    boolOutdoorSensor = False
    if iOutdoorSensor is not None:
       boolOutdoorSensor = True
    sH_Log = sensorHistory('/var/sensorTool/www/loglatestentry.php', '/var/sensorTool/www/logdata.php')
    iLog = 0
    
    modules_webradio = sConfig.getModuleWebradio() # ok
    webradio_active = False 
    modules_webradiomotion = sConfig.getModuleWebradiomotion() # ok
    webradio_motionTimeOut = sConfig.getIntervalWebradiomotion()
    webradio_motionActive = True
    modules_surveillance = sConfig.getModuleSurveillance() # ok
    modules_motiondetector = sConfig.getModuleMotiondetector() 
    motion_detected = False
    motion_detected_report = False
    ledalarm = False
    
    modules_radiators = sConfig.getModuleRadiators() # ok
    RadiatorStarted = False
    modules_relais = sConfig.getModuleRelais()
    modules_fritzactors = sConfig.getModuleFritzActors() # ok
    modules_LANDevices = sConfig.getModuleLANDevices() # ok
    LANDevices_Present = False
    LANNetwork = sConfig.getLANNetwork()
    dictMobileHosts = sConfig.getdictMobileHosts()
    
    sConfig.SetupDynamicConfig('/var/sensorTool/www/dynamic.conf')
    
    dictActiveModules = {}
    dictActiveModules['time'] = list()
    dictActiveModules['Motiondetector']  = moduleDevice(20)
    dictActiveModules['NetworkDeviceDetector'] = moduleDevice(30)
    dictActiveModules['Webradio']  = moduleDevice(40)
    dictActiveModules['Radiators']  = moduleDevice(60)
    dictActiveModules['ledalarm']  = moduleDevice(90)
    
    dictTemperature = {}
    dictTemperature['time'] = list()
    dictRelativeHumidity = {}
    dictRelativeHumidity['time'] = list()
    dictAbsoluteHumidity = {}
    dictAbsoluteHumidity['time'] = list()
    dictPressure = {}
    dictPressure['time'] = list()
    
    for vKey in dictSensors:
        sSensorName = dictSensors[vKey].GetSensor()
        dictTemperature[sSensorName] = moduleDevice(0)
        dictRelativeHumidity[sSensorName] = moduleDevice(0)
        dictAbsoluteHumidity[sSensorName] = moduleDevice(0)
        if dictSensors[vKey].GetBME():
            dictPressure[sSensorName] = moduleDevice(0)
    
    if vVerbose == 'test':
        print 'MAXTIME' + str(MAXTIME)
        print 'MINTIME' + str(MINTIME)
        print 'INTERVAL_SENSORS' + str(INTERVAL_SENSORS)
        print 'INTERVAL_FRITZACTORS' + str(INTERVAL_FRITZACTORS)
        print 'INTERVAL_WEBRADIO' + str(INTERVAL_WEBRADIO)
        print 'INTERVAL_LANDEVICES' + str(INTERVAL_LANDEVICES)
        print 'webradio_motionTimeOut' + str(webradio_motionTimeOut)
        sleep(1)
    
    # Config Variable leeren
    sConfig = None
    
    vBoolLC = True
    # fritz off moved after first fritzactors call
    
    degC = 0
    hPa = 0
    hRel = 0
    degC1 = 0
    hPa1 = 0
    vBoolSensor1 = True
    counterHigh = 0
    counterLow = 0
    timeDuration = 0
    
    # functions for print out and WhatsApp
    def getInfoText(vStatus):
        vHeader = vTitel
        if vVerbose.startswith('test'):
            vHeader += ' Test\n'
        else:
            vHeader += '\n'
            
        vNow = datetime.datetime.now().strftime('%Y-%m-%d %H:%M:%S') + ' ' + vStatus
        vSensorPaket = ''
        for vKey in dictSensors:
            vSensorPaket += '\n ' + str(dictSensors[vKey].GetInfo(False, False))
            
        vActorsPaket = ''
        for vAKey in dictActors:
            vActorsPaket += '\n' + str(dictActors[vAKey].GetInfo(False, False))
            
        vGPIOStatus = ''
    #    vGPIOStatus += '\n Relais: ' + str(RadiatorStarted) + ' (' + str(RelayIN1.isOn) + '|' + str(RelayIN2.isOn) + ')'
        vGPIOStatus += '\n Code:   ' + str(timeDuration) + ';' + str(counterHigh) + ';' + str(counterLow)
    #    vGPIOStatus += '\n LED:    ' + str(LedG.isOn) + str(LedY.isOn) + str(LedR.isOn)
        vReturnText = vHeader + vNow + vSensorPaket + vActorsPaket + vGPIOStatus  # + str(dictActors)
        return vReturnText
    
    # print CSV
#    def getInfoCSV():
#        vReturnText = datetime.datetime.now().strftime('%Y-%m-%d %H:%M:%S') + ';'
#        vReturnText = vReturnText + str(RelaisStarted) + ';'
#        vReturnText = vReturnText + str(timeDuration) + ';' + str(counterHigh) + ';' + str(counterLow) + ";"
#        vReturnText = vReturnText + str(RelayIN1.isOn) + str(RelayIN2.isOn) + ";"
#        vReturnText = vReturnText + str(LedG.isOn) + str(LedY.isOn) + str(LedR.isOn) + ";"
#        
#        for vKey in dictSensors:
#            vReturnText = vReturnText + str(dictSensors[vKey].GetInfo(True, False))
#        return vReturnText
    
    # print html status output
    def getHTML():
        vhttpResult = ''
        vhttpResult += 'echo "<DIV class=\\"sensor\\"><TABLE class=\\"sensor\\"><TR>\\n";\n'
        vhttpResult += 'echo "<TD>\\n";\n'
        for vKey in dictSensors:
            vhttpResult += dictSensors[vKey].GetHttpTable()
            
        vhttpResult += 'echo "</TD>\\n";\n'
        vhttpResult += 'echo "<TD>\\n";\n'
        
        for vKey in dictActiveModules:
            if vKey <> 'time':
                vhttpResult += dictActiveModules[vKey].GetHttpTable(vKey)
     
        if modules_fritzactors:
            for vAKey in dictActors:
                vhttpResult += dictActors[vAKey].GetHttpTable()
            
        vhttpResult += 'echo "</TD></TR></TABLE></DIV>\\n";\n'
        return vhttpResult
    
    # find out private ip address -------------------------------------------------
#    ip = [(s.connect(('8.8.8.8', 80)), s.getsockname()[0], s.close()) for s in [socket.socket(socket.AF_INET, socket.SOCK_DGRAM)]][0][1]
    # init  -----------------------------------------------------------------------
    
    # refresh for sensor data
    refreshTime_sensors = time.time() + INTERVAL_SENSORS
    # refresh for fritz actors
    refreshTime_fritzactors = time.time()
    
    refreshTime_webradio = time.time()
    refreshTime_motiondetector = time.time()
    # refresh for Queue
    
    # if vVerbose.startswith('test'):
    #     INTERVAL_LANDEVICES = 3   
    refreshTime_LANDevices = time.time() + INTERVAL_LANDEVICES
    qNDD = Queue.LifoQueue(maxsize=1)
    DiscoveryInProgress = False
    refreshTime_Queue = 5
    INTERVAL_QUEUE = 5
    refreshTime_webradioMotion = time.time() + webradio_motionTimeOut
    qSensors = Queue.LifoQueue()
    #qSensors = Queue.LifoQueue(maxsize=1)
    thread.start_new_thread(threadSensors,  (qSensors,  vVerbose) )
    if vVerbose.startswith('test'):
        print 'MT: Starting Thread1.Sensors'
    # FAInProgress = False
    # qFA = Queue.LifoQueue(maxsize=1)
    
    
    # loop ------------------------------------------------------------------------
    #LedR.off()
    if vVerbose.startswith('test1'):
        print 'Config loaded'
        print str(refreshTime_sensors) + '##' + str(time.time())
    
    while time.strftime('%H%M') < MAXTIME: 
        # Check NDD Queue every INTERVAL_LANDEVICES secs
        if time.time() > refreshTime_Queue:
            if vVerbose.startswith('test'):
                print str(time.time())+'while: refreshTime_Queue ('+str(refreshTime_Queue)+')'
            if not qNDD.empty():
                #dictNetDevs = {}
                #dictNetDevs = qNDD.get()
                boolNDD = qNDD.get()
                LANDevices_Present = boolNDD
                if vVerbose.startswith('test'):
                    print str(time.time())+'while: refreshTime_Queue: NDD (True) : LANDevices_Present ('+str(LANDevices_Present)+')'
                qNDD.task_done()
                DiscoveryInProgress = False
                
            refreshTime_Queue = time.time() + INTERVAL_QUEUE
        
        if time.time() > refreshTime_motiondetector:
            if vVerbose.startswith('test1'):
                print str(time.time())+'while: refreshTime_motiondetector ('+str(refreshTime_motiondetector)+')'
            if modules_motiondetector:
                if vVerbose.startswith('test1'):
                    print str(time.time())+'while: refreshTime_motiondetector: modules_motiondetector'
                if BMelder.status() == 1:
                    motion_detected = True
                    motion_detected_report = True
                else:
                    motion_detected = False
                if vVerbose.startswith('test1'):
                    print str(time.time())+'while: refreshTime_motiondetector: modules_motiondetector: motion_detected_report('+str(motion_detected_report)+')'
                    
            if modules_surveillance and modules_motiondetector:
                if vVerbose.startswith('test1'):
                    print str(time.time())+'while: refreshTime_motiondetector: modules_surveillance, modules_motiondetector'
                if not LANDevices_Present:
                    if motion_detected:
                        threadPICAM2('surveillance')
                        sH_Log.Add(' surveillance take picset ')
                else:
                    threadPICAM2('low')
                    sH_Log.Add(' surveillance take pic low ')
                    
            refreshTime_motiondetector = time.time() + 1
            
        if time.time() > refreshTime_LANDevices:
            if vVerbose.startswith('test1'):
                print str(time.time())+'while: refreshTime_LANDevices ('+str(refreshTime_LANDevices)+')'
            if modules_LANDevices:
                if vVerbose.startswith('test1'):
                    print str(time.time())+'while: refreshTime_LANDevices: modules_LANDevices'
                #parallel with threading and queue
                if not DiscoveryInProgress:
                    if vVerbose.startswith('test1'):
                        print str(time.time())+'while: refreshTime_LANDevices: modules_LANDevices: Start Network Device Discovery!'
                    thread.start_new_thread(threadNetDiscovery,  (qNDD,  LANNetwork,  dictMobileHosts) )
                    DiscoveryInProgress = True
                else:
                    if vVerbose.startswith('test1'):
                        print 'Discovery running'
            
            refreshTime_LANDevices = time.time() + INTERVAL_LANDEVICES
    
        # get fritz actor data
        if time.time() > refreshTime_fritzactors:
            if vVerbose.startswith('test1'):
                print str(time.time())+'while: refreshTime_fritzactors ('+str(refreshTime_fritzactors)+')'        
            if modules_fritzactors:
                if vVerbose.startswith('test1'):
                    print str(time.time())+'while: refreshTime_fritzactors: modules_fritzactors'        
                dictActors = threadFritzActors2()
                    
                # On Startup stop running radiators
                if vBoolLC:# and not FAInProgress:
                    dictActors[str(dictSensors[iControlSensor].GetFritzActor())].SetActor(False)
            refreshTime_fritzactors = time.time() + INTERVAL_FRITZACTORS
        
        # Check if there is a webradio setting change
        if time.time() > refreshTime_webradio: 
            if vVerbose.startswith('test'):
                print str(time.time())+'while: refreshTime_webradio ('+str(refreshTime_webradio)+')'    
      
            if modules_webradio:
                if vVerbose.startswith('test'):
                    print str(time.time())+'while: refreshTime_webradio: modules_webradio'
                (webradio_active1, webradio_changed, webradio_result) = threadWebradioService('/var/sensorTool/www/webradio.station', webradio_active)
                if webradio_changed:
                    if webradio_active <> webradio_active1:
                        webradio_active = webradio_active1
                    sH_Log.Add(' Webradio change: ' + str(webradio_result))       
            elif not modules_webradio and webradio_active:
                if vVerbose.startswith('test'):
                    print str(time.time())+'while: refreshTime_webradio: not modules_webradio, webradio_active'
                (webradio_active, webradio_changed, webradio_result) = threadWebradioService('/var/sensorTool/www/webradio.station', webradio_active, True)
                sH_Log.Add(' Webradio stopped')
    
            if webradio_motionActive and not webradio_active and modules_webradio and modules_webradiomotion:
                if vVerbose.startswith('test'):
                    print str(time.time())+'while: refreshTime_webradio: webradio_motionActive, webradio_active, modules_webradio, modules_webradiomotion'    
                refreshTime_webradioMotion = time.time() + webradio_motionTimeOut
                (webradio_active, webradio_changed, webradio_result) = threadWebradioService('/var/sensorTool/www/webradio.station', webradio_active, False,  True)
                sH_Log.Add(' Webradio started')
            
            refreshTime_webradio = time.time() + INTERVAL_WEBRADIO
    
        #print 'time '+str(time.time())+'>'+str(refreshTime_webradioMotion)+' refreshTime_webradioMotion'
        # Timeout for webradio - stop when no motion is detected (active motioncontrol)
        if time.time() > refreshTime_webradioMotion:
            if vVerbose.startswith('test'):
                print str(time.time())+'while: refreshTime_webradioMotion ('+str(refreshTime_webradioMotion)+')'
                #print str(time.time())+'while: refreshTime_webradioMotion: modules_webradio ('+str(modules_webradio)+'), modules_webradiomotion ('+str(modules_webradiomotion)+'), not webradio_motionActive('+str(webradio_motionActive)+')'            
            if modules_webradio and modules_webradiomotion and not webradio_motionActive and webradio_active:
                if vVerbose.startswith('test'):
                    print str(time.time())+'while: refreshTime_webradioMotion: modules_webradio ('+str(modules_webradio)+'), modules_webradiomotion ('+str(modules_webradiomotion)+'), not webradio_motionActive('+str(webradio_motionActive)+'), webradio_active ('+str(webradio_active)+')'            
                (webradio_active, webradio_changed, webradio_result) = threadWebradioService('/var/sensorTool/www/webradio.station', webradio_active, True)
                sH_Log.Add(' Webradio stopped, no motion') 
            refreshTime_webradioMotion = time.time() + INTERVAL_WEBRADIO
        
        # every 10 seconds, try to send data to servers
        if time.time() > refreshTime_sensors:
            if vVerbose.startswith('test'):
                print str(time.time())+'while: refreshTime_sensors ('+str(refreshTime_sensors)+')'
                print str(refreshTime_sensors) + '##' + str(time.time())
            # print str(refreshTime2) + '##' + str(time.time())
            # Werte holen per http request ::D
            try:
                vR = None
                if not in_q.empty():
                    vR = in_q.get()
                    in_q.task_done()
                               
                dictResponse = {}
                dictResponse = ast.literal_eval(str(vR))
                if vVerbose == 'test1':
                    print dictResponse
                for vSensor in dictResponse:
                    dictTemp = {}
                    dictTemp['ID'] = vSensor
                    if 'Time' in dictResponse[vSensor]:
                        dictTemp['Time'] = dictResponse[vSensor]['Time']
                    if 'RH' in dictResponse[vSensor]:
                        dictTemp['RH'] = dictResponse[vSensor]['RH']
                    if 'T' in dictResponse[vSensor]:
                        dictTemp['T'] = dictResponse[vSensor]['T']
                    if 'hPa' in dictResponse[vSensor]:    
                        dictTemp['hPa'] = dictResponse[vSensor]['hPa']
                    
                    boolBME280 = False
                    if (vSensor == 'bme280') :
                        boolBME280 = True
                    
                    for vKey in dictSensors:
                        if dictSensors[vKey].GetHex() == vSensor:
                            dictSensors[vKey].SetSensorData(dictTemp, boolBME280)
            
                #DeviceMotion.SetSensorData(motion_detected_report)
                if modules_webradiomotion:
                    
                    if motion_detected_report:
                    # if motion detected than increase refreshTime_webradioMotion by webradio_motionTimeOut
                        webradio_motionActive = True
                        refreshTime_webradioMotion = time.time() + webradio_motionTimeOut
                        print refreshTime_webradioMotion
                    else:
                        
                        # no motion detected, but mobile device present, webradio must be acticve
                        if modules_LANDevices and LANDevices_Present:
                            webradio_motionActive = True
                            refreshTime_webradioMotion = time.time() + webradio_motionTimeOut
                            print refreshTime_webradioMotion                       
                        else:
                            webradio_motionActive = False
                 
                # Values for Diagramm 
                
                sPlottingTime = str(datetime.datetime.now().strftime('%Y-%m-%d %H:%M:%S'))
                dictTemperature['time'].append(sPlottingTime)
                dictRelativeHumidity['time'].append(sPlottingTime)
                dictAbsoluteHumidity['time'].append(sPlottingTime)
                dictPressure['time'].append(sPlottingTime)
                for vKey in dictSensors:
                    sSensorName = dictSensors[vKey].GetSensor()
                    dictTemperature[sSensorName].SetModuleValue(dictSensors[vKey].GetT())
                    dictRelativeHumidity[sSensorName] .SetModuleValue(dictSensors[vKey].GetRH())
                    dictAbsoluteHumidity[sSensorName].SetModuleValue(dictSensors[vKey].GetAH())
                    if dictSensors[vKey].GetBME():
                        dictPressure[sSensorName].SetModuleValue(dictSensors[vKey].GetPA())
                    
                dictActiveModules['time'].append(sPlottingTime)
                dictActiveModules['Motiondetector'].SetModuleStatus(motion_detected_report)
                dictActiveModules['NetworkDeviceDetector'].SetModuleStatus(LANDevices_Present)
                dictActiveModules['Webradio'].SetModuleStatus(webradio_active)
                dictActiveModules['Radiators'].SetModuleStatus(RadiatorStarted)
                dictActiveModules['ledalarm'].SetModuleStatus(ledalarm)
                motion_detected_report = False
                ledalarm = False
            
            except Exception as e:
                sH_Log.Add(str(e)) 
                print e
                # pass
    
            # ############### Dynamic Config  Start ###################
            # Dynamische Config einlesen #soll ueber http request gesteuert werden.
            dynamicConf = ConfigParser.ConfigParser()
            dynamicConf.read('/var/sensorTool/www/dynamic.conf')
            # Try to change the Relais Status 
            try:
                if vVerbose.startswith('test'):
                    print str(time.time())+'while: refreshTime_sensors: dynamicConf'
                
                if dynamicConf.getboolean('modules', 'modules_radiators') != modules_radiators:
                    modules_radiators = dynamicConf.getboolean('modules', 'modules_radiators')
                    sH_Log.Add(' modules_radiators set to ' + str(modules_radiators))
                    if vVerbose.startswith('test'):
                        print str(time.time())+'while: refreshTime_sensors: dynamicConf: modules_radiators('+str(modules_radiators)+')'
    
                if dynamicConf.getboolean('modules', 'modules_motiondetector') != modules_motiondetector:
                    modules_motiondetector = dynamicConf.getboolean('modules', 'modules_motiondetector')
                    sH_Log.Add(' modules_motiondetector set to ' + str(modules_motiondetector))
                    if not modules_motiondetector and motion_detected:
                        motion_detected = False
                        motion_detected_report = False
                    if vVerbose.startswith('test'):
                        print str(time.time())+'while: refreshTime_sensors: dynamicConf: modules_motiondetector('+str(modules_motiondetector)+')'
    
                if dynamicConf.getboolean('modules', 'modules_surveillance') != modules_surveillance:
                    modules_surveillance = dynamicConf.getboolean('modules', 'modules_surveillance')
                    sH_Log.Add(' modules_surveillance set to ' + str(modules_surveillance))
                    if not modules_surveillance and motion_detected:
                        motion_detected = False
                    if vVerbose.startswith('test'):
                        print str(time.time())+'while: refreshTime_sensors: dynamicConf: modules_surveillance('+str(modules_surveillance)+')'
                    if modules_surveillance and not modules_motiondetector:
                        sH_Log.Add(' modules_motiondetector set to ' + str(modules_motiondetector))
                        modules_motiondetector = True
                        if vVerbose.startswith('test'):
                            print str(time.time())+'while: refreshTime_sensors: dynamicConf: modules_surveillance: modules_motiondetector('+str(modules_motiondetector)+')'
    
                if dynamicConf.getboolean('modules', 'modules_relais') != modules_relais:
                    modules_relais = dynamicConf.getboolean('modules', 'modules_relais')
                    sH_Log.Add(' modules_relais set to ' + str(modules_relais))
                    if vVerbose.startswith('test'):
                        print str(time.time())+'while: refreshTime_sensors: dynamicConf: modules_relais('+str(modules_relais)+')'
    
                if dynamicConf.getboolean('modules', 'modules_fritzactors') != modules_fritzactors:
                    modules_fritzactors = dynamicConf.getboolean('modules', 'modules_fritzactors')
                    sH_Log.Add(' modules_fritzactors set to ' + str(modules_fritzactors))
                    if vVerbose.startswith('test'):
                        print str(time.time())+'while: refreshTime_sensors: dynamicConf: modules_fritzactors('+str(modules_fritzactors)+')'
    
                if dynamicConf.getboolean('modules', 'modules_LANDevices') != modules_LANDevices:
                    modules_LANDevices = dynamicConf.getboolean('modules', 'modules_LANDevices')
                    sH_Log.Add(' modules_LANDevices set to ' + str(modules_LANDevices))
                    if not modules_LANDevices and LANDevices_Present:
                        LANDevices_Present = False
                    if vVerbose.startswith('test'):
                        print str(time.time())+'while: refreshTime_sensors: dynamicConf: modules_LANDevices('+str(modules_LANDevices)+')'
                            
                if dynamicConf.getboolean('modules', 'modules_webradio') != modules_webradio:
                    modules_webradio = dynamicConf.getboolean('modules', 'modules_webradio')
                    sH_Log.Add(' modules_webradio set to ' + str(modules_webradio))
                    if vVerbose.startswith('test'):
                        print str(time.time())+'while: refreshTime_sensors: dynamicConf: modules_webradio('+str(modules_webradio)+')'
                        
                if dynamicConf.getboolean('modules', 'modules_webradiomotion') != modules_webradiomotion:
                    modules_webradiomotion = dynamicConf.getboolean('modules', 'modules_webradiomotion')
                    sH_Log.Add(' modules_webradiomotion set to ' + str(modules_webradiomotion))
                    if not modules_webradiomotion and not webradio_motionActive:
                        webradio_motionActive = True
                    if vVerbose.startswith('test'):
                        print str(time.time())+'while: refreshTime_sensors: dynamicConf: modules_webradiomotion('+str(modules_webradiomotion)+')'
                    if modules_webradiomotion and not modules_webradio:
                        sH_Log.Add(' modules_webradio set to ' + str(modules_webradio))
                        modules_webradio = True
                        if vVerbose.startswith('test'):
                            print str(time.time())+'while: refreshTime_sensors: dynamicConf: modules_webradiomotion: modules_webradio('+str(modules_webradio)+')'
    
            except Exception as e:
                sH_Log.Add(str(e)) 
                print e
                pass
                
            # iterate through sensor data
            for vKey in dictSensors:
                try:
                    vSetHighRH = False
                    if dictSensors[vKey].GetThresholdHighHumidity() == False:
                        vSetHighRH = True
                    elif dynamicConf.getfloat('Sensor' + str(vKey), 'threshold_high_humidity') != dictSensors[vKey].GetThresholdHighHumidity():
                        vSetHighRH = True
                        
                    if vSetHighRH:
                        dictSensors[vKey].SetThresholdHighHumidity(dynamicConf.getfloat('Sensor' + str(vKey), 'threshold_high_humidity'))
                        sH_Log.Add('Threshold High RH S' + str(vKey) + ':' + str(dictSensors[vKey].GetThresholdHighHumidity()))
                        if vVerbose.startswith('test'):
                            print 'Threshold High RH S' + str(vKey) + ':' + str(dictSensors[vKey].GetThresholdHighHumidity())
                            
                except: 
                    pass  # Exception, e:
    
                try:
                    vSetLowT = False
                    if dictSensors[vKey].GetThresholdLowTemperature() == False:
                        vSetLowT = True
                    elif dynamicConf.getfloat('Sensor' + str(vKey), 'threshold_low_temperature') != dictSensors[vKey].GetThresholdLowTemperature():
                        vSetLowT = True
                        
                    if vSetHighRH:
                        dictSensors[vKey].SetThresholdLowTemperature(dynamicConf.getfloat('Sensor' + str(vKey), 'threshold_low_temperature'))
                        sH_Log.Add('Threshold Low T S' + str(vKey) + ':' + str(dictSensors[vKey].GetThresholdLowTemperature()))
                        if vVerbose == 'test':
                            print 'Threshold Low T S' + str(vKey) + ':' + str(dictSensors[vKey].GetThresholdLowTemperature())
                            
                except: 
                    pass  # Exception, e:
                    
            # ############### Dynamic Config  Ende ###################
            
            if vBoolLC == True:
                sendWhatsApps(dictSensors[iControlSensor].GetMobiles(), getInfoText("Active"))
                sH_Log.Add('sensorTool started')
                #LedY.off()
                vBoolLC = False
    
            # ############### Check for Radiator interval  start ##################
            vBoolInterval = dictInterval.isNowInInterval()
            # ############### Check for Radiator interval  Ende ##################
    
            if vVerbose.startswith('test1'):
                print( 'Threshold: ' + str(dictSensors[iControlSensor].GetThreshold()) + ' RadiatorStarted: ' + str(RadiatorStarted) + ' vBoolInterval: ' + str(vBoolInterval) +' modules_radiators: ' + str(modules_radiators))
             
            boolTriggerOutdoor = True
            if boolOutdoorSensor:
                deltaAH = 0.5
                if dictSensors[iControlSensor].GetAH() is not None and dictSensors[iOutdoorSensor].GetAH() is not None:
                    if (float(dictSensors[iControlSensor].GetAH())) < (float(dictSensors[iOutdoorSensor].GetAH())+ deltaAH):
                        boolTriggerOutdoor = False
          
            if dictSensors[iControlSensor].GetThreshold() and RadiatorStarted == False and vBoolInterval and modules_radiators and boolTriggerOutdoor:
                counterHigh = counterHigh + 1
                #if LedY.isOn == False:
                #    LedY.on()
                #    sH_Log.Add(dictSensors[iControlSensor].GetSensor() + ' Yellow LED (H)!')
            else:
                counterHigh = 0
                
            if dictSensors[iControlSensor].GetThreshold() == False and RadiatorStarted and vBoolInterval and modules_radiators and boolTriggerOutdoor:
                counterLow = counterLow + 1
                #if LedY.isOn == False:
                #    LedY.on()
                #    sH_Log.Add(dictSensors[iControlSensor].GetSensor() + ' Yellow LED (L)!')
            else:
                counterLow = 0
    
            if vVerbose.startswith('test1'):
                print( 'counterLow: ' + str(counterLow) + ' counterHigh: ' + str(counterHigh) )
            
            boolInfoLight = False
            # Alle anderen Sensoren (außer Keller) durchgehen
            for vKey in dictSensors:
                # if dictSensors[vKey].GetBME() != True: 
                if iControlSensor <> vKey:
                    vBoolThreshold = dictSensors[vKey].GetThreshold()
    
                    # Grenzwert
                    if vBoolThreshold and dictSensors[vKey].GetSendMessage():
                        sendWhatsApps(dictSensors[vKey].GetMobiles(), dictSensors[vKey].GetMessage())
                        dictSensors[vKey].SetSendMessage(False)
                        sH_Log.Add(dictSensors[vKey].GetSensor() + dictSensors[vKey].GetMessage())
                        boolInfoLight = True
                    elif dictSensors[vKey].GetSendMessage() == False:
                        dictSensors[vKey].SetSendMessage(True)
    
                    # Delta
                    vBoolDelta = dictSensors[vKey].GetDelta()
                    counterDelta = dictSensors[vKey].GetDeltaCounter()
                    if vBoolDelta and dictSensors[vKey].GetDeltaCounter() == 0:
                        dictSensors[vKey].SetDeltaCounter(counterDelta + 1)
                    elif counterDelta > 0:
                        if counterDelta > dictSensors[vKey].GetTriggerCount():
                            sendWhatsApps(dictSensors[vKey].GetMobiles(), dictSensors[vKey].GetDeltaMessage())
                            sH_Log.Add(dictSensors[vKey].GetDeltaMessage())
                            dictSensors[vKey].SetDeltaCounter(0)
                            boolInfoLight = True
                        else:
                            dictSensors[vKey].SetDeltaCounter(counterDelta + 1)
                            
            if boolInfoLight:
                if not boolLeuchte:
                    boolLeuchte = Leuchte.activate(boolLeuchte)
                    ledalarm = True
            else:
                if boolLeuchte:
                    boolLeuchte = Leuchte.deactivate(boolLeuchte)
                    
            if counterHigh == TriggerCountA and RadiatorStarted == False and vBoolInterval and modules_radiators and boolTriggerOutdoor:
                dictActors[dictSensors[iControlSensor].GetFritzActor()].SetActor(True)
                #LedR.on()
                #LedY.off()
                RadiatorStarted = True
                sendWhatsApps(dictSensors[iControlSensor].GetMobiles(), getInfoText("Started"))
                sH_Log.Add('Radiator activated')
            elif (counterLow == TriggerCountB or vBoolInterval == False or modules_radiators == False or boolTriggerOutdoor == False) and RadiatorStarted:
                dictActors[dictSensors[iControlSensor].GetFritzActor()].SetActor(False)
                #LedR.off()
                #LedY.off()
                RadiatorStarted = False
                sendWhatsApps(dictSensors[iControlSensor].GetMobiles(), getInfoText("Stopped"))
                sH_Log.Add('Radiator deactivated')
                
            if vVerbose.startswith('test'):
                #print getInfoText("Status")
                print '##### - #####'
    
            threadCreatePHPFile('/var/sensorTool/www/sensor.php', getHTML())
    #        thread.start_new_thread(threadCreatePHPFile, ('/var/sensorTool/www/sensor.php', getHTML(),))        
    
            plotting_DeviceValues(dictActiveModules,  '1_Modules',  vVerbose)
            plotting_DeviceValues(dictTemperature, '3_Temperature',  vVerbose,  -20,  50)
            plotting_DeviceValues(dictRelativeHumidity, '4_Relative_Humidity',  vVerbose)
            plotting_DeviceValues(dictAbsoluteHumidity, '2_Absolute_Humidity',  vVerbose,  0,  30)
            plotting_DeviceValues(dictPressure, '9_Pressure',  vVerbose,  700,  1100)
            
    #        thread.start_new_thread(plotting, (dictPlotSens, dictPlotAussen, vVerbose,))
              
            refreshTime_sensors = time.time() + INTERVAL_SENSORS
        sleep(1) # 0.1
    
    if RadiatorStarted:
        dictActors[dictSensors[iControlSensor].GetFritzActor()].SetActor(False)
    
    sendWhatsApps(dictSensors[iControlSensor].GetMobiles(), getInfoText("Inactive - going down"))
    if vVerbose.startswith('test'):
        print 'GPIO Down'
    #LedY.off()
    #LedR.off()
    #LedG.off()
    if boolLeuchte:
        Leuchte.deactivate(boolLeuchte)
    
    if not vVerbose.startswith('test'):
        os.system("sudo init 0")
    else:
        print ' - Ende - '

 
# vim: tabstop=8 expandtab shiftwidth=4 softtabstop=4