def _plot_valfun(self, VMat, xlim=None, ylim=None):
"""
:returns: handle to the figure
"""
plt.figure("Value Function")
#pl.xticks(self.xTicks,self.xTicksLabels, fontsize=12)
#pl.yticks(self.yTicks,self.yTicksLabels, fontsize=12)
#pl.xlabel(r"$\theta$ (degree)")
#pl.ylabel(r"$\dot{\theta}$ (degree/sec)")
plt.title('Value Function')
if xlim is not None and ylim is not None:
extent = [xlim[0], xlim[1], ylim[0], ylim[1]]
else:
extent = [0, 1, 0, 1]
self.valueFunction_fig = plt.imshow(
VMat,
cmap='ValueFunction',
interpolation='nearest',
origin='lower',
extent=extent)
norm = colors.Normalize(vmin=VMat.min(), vmax=VMat.max())
self.valueFunction_fig.set_data(VMat)
self.valueFunction_fig.set_norm(norm)
plt.draw()
def showDomain(self, a=0, s=None):
if s is None:
s = self.state
# Draw the environment
if self.domain_fig is None:
self.agent_fig = plt.figure("Domain")
self.domain_fig = plt.imshow(self.map,
cmap='GridWorld',
interpolation='nearest',
vmin=0,
vmax=5)
plt.xticks(np.arange(self.COLS), fontsize=FONTSIZE)
plt.yticks(np.arange(self.ROWS), fontsize=FONTSIZE)
# pl.tight_layout()
self.agent_fig = plt.gca().plot(s[1],
s[0],
'kd',
markersize=20.0 - self.COLS)
plt.show()
self.agent_fig.pop(0).remove()
self.agent_fig = plt.figure("Domain")
#mapcopy = copy(self.map)
#mapcopy[s[0],s[1]] = self.AGENT
# self.domain_fig.set_data(mapcopy)
# Instead of '>' you can use 'D', 'o'
self.agent_fig = plt.gca().plot(s[1],
s[0],
'k>',
markersize=20.0 - self.COLS)
plt.draw()
def showDomain(self, a=0):
s = self.state
# Draw the environment
if self.circles is None:
self.domain_fig = plt.subplot(3, 1, 1)
plt.figure(1, (self.chainSize * 2 / 10.0, 2))
self.domain_fig.set_xlim(0, self.chainSize * 2 / 10.0)
self.domain_fig.set_ylim(0, 2)
self.domain_fig.add_patch(
mpatches.Circle(
(1 / 5.0 + 2 / 10.0 * (self.chainSize - 1), self.Y),
self.RADIUS * 1.1,
fc="w")) # Make the last one double circle
self.domain_fig.xaxis.set_visible(False)
self.domain_fig.yaxis.set_visible(False)
self.circles = [
mpatches.Circle((1 / 5.0 + 2 / 10.0 * i, self.Y),
self.RADIUS,
fc="w") for i in range(self.chainSize)
]
for i in range(self.chainSize):
self.domain_fig.add_patch(self.circles[i])
plt.show()
for p in self.circles:
p.set_facecolor('w')
for p in self.GOAL_STATES:
self.circles[p].set_facecolor('g')
self.circles[s].set_facecolor('k')
plt.draw()
def showDomain(self, a=0, s=None):
if s is None:
s = self.state
# Draw the environment
if self.domain_fig is None:
self.agent_fig = plt.figure("Domain")
self.domain_fig = plt.imshow(
self.map,
cmap='GridWorld',
interpolation='nearest',
vmin=0,
vmax=5)
plt.xticks(np.arange(self.COLS), fontsize=FONTSIZE)
plt.yticks(np.arange(self.ROWS), fontsize=FONTSIZE)
# pl.tight_layout()
self.agent_fig = plt.gca(
).plot(s[1],
s[0],
'kd',
markersize=20.0 - self.COLS)
plt.show()
self.agent_fig.pop(0).remove()
self.agent_fig = plt.figure("Domain")
#mapcopy = copy(self.map)
#mapcopy[s[0],s[1]] = self.AGENT
# self.domain_fig.set_data(mapcopy)
# Instead of '>' you can use 'D', 'o'
self.agent_fig = plt.gca(
).plot(s[1],
s[0],
'k>',
markersize=20.0 - self.COLS)
plt.draw()
def showDomain(self, a=None):
if a is not None:
a = self.actions[a]
T = np.empty((self.d, 2))
T[:, 0] = np.cos(self.theta)
T[:, 1] = np.sin(self.theta)
R = np.dot(self.P, T)
R1 = R - .5 * self.lengths[:, None] * T
R2 = R + .5 * self.lengths[:, None] * T
Rx = np.hstack([R1[:, 0], R2[:, 0]]) + self.pos_cm[0]
Ry = np.hstack([R1[:, 1], R2[:, 1]]) + self.pos_cm[1]
print(Rx)
print(Ry)
f = plt.figure("Swimmer Domain")
if not hasattr(self, "swimmer_lines"):
plt.plot(0., 0., "ro")
self.swimmer_lines = plt.plot(Rx, Ry)[0]
self.action_text = plt.text(-2, -8, str(a))
plt.xlim(-5, 15)
plt.ylim(-10, 10)
else:
self.swimmer_lines.set_data(Rx, Ry)
self.action_text.set_text(str(a))
plt.figure("Swimmer Domain").canvas.draw()
plt.figure("Swimmer Domain").canvas.flush_events()
def showDomain(self, a=0):
s = self.state
# Draw the environment
if self.circles is None:
self.domain_fig = plt.subplot(3, 1, 1)
plt.figure(1, (self.chainSize * 2 / 10.0, 2))
self.domain_fig.set_xlim(0, self.chainSize * 2 / 10.0)
self.domain_fig.set_ylim(0, 2)
self.domain_fig.add_patch(
mpatches.Circle((1 / 5.0 + 2 / 10.0 * (self.chainSize - 1),
self.Y),
self.RADIUS * 1.1,
fc="w")) # Make the last one double circle
self.domain_fig.xaxis.set_visible(False)
self.domain_fig.yaxis.set_visible(False)
self.circles = [mpatches.Circle((1 / 5.0 + 2 / 10.0 * i, self.Y), self.RADIUS, fc="w")
for i in range(self.chainSize)]
for i in range(self.chainSize):
self.domain_fig.add_patch(self.circles[i])
plt.show()
for p in self.circles:
p.set_facecolor('w')
for p in self.GOAL_STATES:
self.circles[p].set_facecolor('g')
self.circles[s].set_facecolor('k')
plt.draw()
def showExploration(self):
plt.figure()
plt.scatter([i[0] for i in self.visited_states],
[i[1] for i in self.visited_states],
color='k')
plt.scatter([self.src['x']], [self.src['y']], color='r')
plt.scatter([self.target['x']], [self.target['y']], color='b')
plt.show()
def showLearning(self, representation):
pi = np.zeros(
(self.X_discretization,
self.XDot_discretization),
'uint8')
V = np.zeros((self.X_discretization, self.XDot_discretization))
if self.valueFunction_fig is None:
self.valueFunction_fig = plt.figure("Value Function")
self.valueFunction_im = plt.imshow(
V,
cmap='ValueFunction',
interpolation='nearest',
origin='lower',
vmin=self.MIN_RETURN,
vmax=self.MAX_RETURN)
plt.xticks(self.xTicks, self.xTicksLabels, fontsize=12)
plt.yticks(self.yTicks, self.yTicksLabels, fontsize=12)
plt.xlabel(r"$x$")
plt.ylabel(r"$\dot x$")
self.policy_fig = plt.figure("Policy")
self.policy_im = plt.imshow(
pi,
cmap='MountainCarActions',
interpolation='nearest',
origin='lower',
vmin=0,
vmax=self.actions_num)
plt.xticks(self.xTicks, self.xTicksLabels, fontsize=12)
plt.yticks(self.yTicks, self.yTicksLabels, fontsize=12)
plt.xlabel(r"$x$")
plt.ylabel(r"$\dot x$")
plt.show()
for row, xDot in enumerate(np.linspace(self.XDOTMIN, self.XDOTMAX, self.XDot_discretization)):
for col, x in enumerate(np.linspace(self.XMIN, self.XMAX, self.X_discretization)):
s = [x, xDot]
Qs = representation.Qs(s, False)
As = self.possibleActions()
pi[row, col] = representation.bestAction(s, False, As)
V[row, col] = max(Qs)
self.valueFunction_im.set_data(V)
self.policy_im.set_data(pi)
self.valueFunction_fig = plt.figure("Value Function")
plt.draw()
self.policy_fig = plt.figure("Policy")
plt.draw()
def showDomain(self, a):
s = self.state
# Plot the car
x, y, speed, heading = s
car_xmin = x - self.REAR_WHEEL_RELATIVE_LOC
car_ymin = y - self.CAR_WIDTH / 2.
if self.domain_fig is None: # Need to initialize the figure
self.domain_fig = plt.figure()
# Goal
plt.gca().add_patch(
plt.Circle(self.GOAL,
radius=self.GOAL_RADIUS,
color='g',
alpha=.4))
plt.xlim([self.XMIN, self.XMAX])
plt.ylim([self.YMIN, self.YMAX])
plt.gca().set_aspect('1')
# Car
if self.car_fig is not None:
plt.gca().patches.remove(self.car_fig)
self.car_fig = mpatches.Rectangle([car_xmin, car_ymin],
self.CAR_LENGTH,
self.CAR_WIDTH,
alpha=.4)
rotation = mpl.transforms.Affine2D().rotate_deg_around(
x, y, heading * 180 / np.pi) + plt.gca().transData
self.car_fig.set_transform(rotation)
plt.gca().add_patch(self.car_fig)
plt.draw()
def plot(self, y="return", x="learning_steps", save=False):
"""Plots the performance of the experiment
This function has only limited capabilities.
For more advanced plotting of results consider
:py:class:`Tools.Merger.Merger`.
"""
labels = rlpy.Tools.results.default_labels
performance_fig = plt.figure("Performance")
res = self.result
plt.plot(res[x], res[y], '-bo', lw=3, markersize=10)
plt.xlim(0, res[x][-1] * 1.01)
y_arr = np.array(res[y])
m = y_arr.min()
M = y_arr.max()
delta = M - m
if delta > 0:
plt.ylim(m - .1 * delta - .1, M + .1 * delta + .1)
xlabel = labels[x] if x in labels else x
ylabel = labels[y] if y in labels else y
plt.xlabel(xlabel, fontsize=16)
plt.ylabel(ylabel, fontsize=16)
if save:
path = os.path.join(
self.full_path,
"{:3}-performance.pdf".format(self.exp_id))
performance_fig.savefig(path, transparent=True, pad_inches=.1)
plt.ioff()
plt.show()
def plot(self, y="return", x="learning_steps", save=False):
"""Plots the performance of the experiment
This function has only limited capabilities.
For more advanced plotting of results consider
:py:class:`Tools.Merger.Merger`.
"""
labels = rlpy.Tools.results.default_labels
performance_fig = plt.figure("Performance")
res = self.result
plt.plot(res[x], res[y], '-bo', lw=3, markersize=10)
plt.xlim(0, res[x][-1] * 1.01)
y_arr = np.array(res[y])
m = y_arr.min()
M = y_arr.max()
delta = M - m
if delta > 0:
plt.ylim(m - .1 * delta - .1, M + .1 * delta + .1)
xlabel = labels[x] if x in labels else x
ylabel = labels[y] if y in labels else y
plt.xlabel(xlabel, fontsize=16)
plt.ylabel(ylabel, fontsize=16)
if save:
path = os.path.join(self.full_path,
"{:3}-performance.pdf".format(self.exp_id))
performance_fig.savefig(path, transparent=True, pad_inches=.1)
plt.ioff()
plt.show()
def showDomain(self, a):
s = self.state
# Plot the car
x, y, speed, heading = s
car_xmin = x - self.REAR_WHEEL_RELATIVE_LOC
car_ymin = y - old_div(self.CAR_WIDTH, 2.)
if self.domain_fig is None: # Need to initialize the figure
self.domain_fig = plt.figure()
# Goal
plt.gca(
).add_patch(
plt.Circle(
self.GOAL,
radius=self.GOAL_RADIUS,
color='g',
alpha=.4))
plt.xlim([self.XMIN, self.XMAX])
plt.ylim([self.YMIN, self.YMAX])
plt.gca().set_aspect('1')
# Car
if self.car_fig is not None:
plt.gca().patches.remove(self.car_fig)
self.car_fig = mpatches.Rectangle(
[car_xmin,
car_ymin],
self.CAR_LENGTH,
self.CAR_WIDTH,
alpha=.4)
rotation = mpl.transforms.Affine2D().rotate_deg_around(
x, y, heading * 180 / np.pi) + plt.gca().transData
self.car_fig.set_transform(rotation)
plt.gca().add_patch(self.car_fig)
plt.draw()
def _plot_policy(self,
piMat,
title="Policy",
var="policy_fig",
xlim=None,
ylim=None):
"""
:returns: handle to the figure
"""
if getattr(self, var, None) is None:
plt.figure(title)
# define the colormap
cmap = plt.cm.jet
# extract all colors from the .jet map
cmaplist = [cmap(i) for i in range(cmap.N)]
# force the first color entry to be grey
cmaplist[0] = (.5, .5, .5, 1.0)
# create the new map
cmap = cmap.from_list('Custom cmap', cmaplist, cmap.N)
# define the bins and normalize
bounds = np.linspace(0, self.actions_num, self.actions_num + 1)
norm = mpl.colors.BoundaryNorm(bounds, cmap.N)
if xlim is not None and ylim is not None:
extent = [xlim[0], xlim[1], ylim[0], ylim[1]]
else:
extent = [0, 1, 0, 1]
self.__dict__[var] = plt.imshow(piMat,
interpolation='nearest',
origin='lower',
cmap=cmap,
norm=norm,
extent=extent)
#pl.xticks(self.xTicks,self.xTicksLabels, fontsize=12)
#pl.yticks(self.yTicks,self.yTicksLabels, fontsize=12)
#pl.xlabel(r"$\theta$ (degree)")
#pl.ylabel(r"$\dot{\theta}$ (degree/sec)")
plt.title(title)
plt.colorbar()
plt.figure(title)
self.__dict__[var].set_data(piMat)
plt.draw()
def gridworld_showlearning(self, representation):
dom = self.actual_domain
if self.valueFunction_fig is None:
plt.figure("Value Function")
self.valueFunction_fig = plt.imshow(dom.map,
cmap='ValueFunction',
interpolation='nearest',
vmin=dom.MIN_RETURN,
vmax=dom.MAX_RETURN)
plt.xticks(np.arange(dom.COLS), fontsize=12)
plt.yticks(np.arange(dom.ROWS), fontsize=12)
# Create quivers for each action. 4 in total
plt.show()
plt.figure("Value Function")
V = self.get_value_function(representation)
# print Acts
# Show Value Function
self.valueFunction_fig.set_data(V)
plt.draw()
def _plot_policy(self, piMat, title="Policy",
var="policy_fig", xlim=None, ylim=None):
"""
:returns: handle to the figure
"""
if getattr(self, var, None) is None:
plt.figure(title)
# define the colormap
cmap = plt.cm.jet
# extract all colors from the .jet map
cmaplist = [cmap(i) for i in range(cmap.N)]
# force the first color entry to be grey
cmaplist[0] = (.5, .5, .5, 1.0)
# create the new map
cmap = cmap.from_list('Custom cmap', cmaplist, cmap.N)
# define the bins and normalize
bounds = np.linspace(0, self.actions_num, self.actions_num + 1)
norm = mpl.colors.BoundaryNorm(bounds, cmap.N)
if xlim is not None and ylim is not None:
extent = [xlim[0], xlim[1], ylim[0], ylim[1]]
else:
extent = [0, 1, 0, 1]
self.__dict__[var] = plt.imshow(
piMat,
interpolation='nearest',
origin='lower',
cmap=cmap,
norm=norm,
extent=extent)
#pl.xticks(self.xTicks,self.xTicksLabels, fontsize=12)
#pl.yticks(self.yTicks,self.yTicksLabels, fontsize=12)
#pl.xlabel(r"$\theta$ (degree)")
#pl.ylabel(r"$\dot{\theta}$ (degree/sec)")
plt.title(title)
plt.colorbar()
plt.figure(title)
self.__dict__[var].set_data(piMat)
plt.draw()
def showDomain(self, a=0):
# Draw the environment
s = self.state
world = np.zeros((self.blocks, self.blocks), 'uint8')
undrawn_blocks = np.arange(self.blocks)
while len(undrawn_blocks):
A = undrawn_blocks[0]
B = s[A]
undrawn_blocks = undrawn_blocks[1:]
if B == A: # => A is on Table
world[0, A] = A + 1 # 0 is white thats why!
else:
# See if B is already drawn
i, j = findElemArray2D(B + 1, world)
if len(i):
world[i + 1, j] = A + 1 # 0 is white thats why!
else:
# Put it in the back of the list
undrawn_blocks = np.hstack((undrawn_blocks, [A]))
if self.domain_fig is None:
plt.figure("Domain")
self.domain_fig = plt.imshow(
world,
cmap='BlocksWorld',
origin='lower',
interpolation='nearest') # ,vmin=0,vmax=self.blocks)
plt.xticks(np.arange(self.blocks), fontsize=FONTSIZE)
plt.yticks(np.arange(self.blocks), fontsize=FONTSIZE)
# pl.tight_layout()
plt.axis('off')
plt.show()
else:
self.domain_fig.set_data(world)
plt.figure("Domain").canvas.draw()
plt.figure("Domain").canvas.flush_events()
def showDomain(self, a=0):
# Draw the environment
s = self.state
world = np.zeros((self.blocks, self.blocks), 'uint8')
undrawn_blocks = np.arange(self.blocks)
while len(undrawn_blocks):
A = undrawn_blocks[0]
B = s[A]
undrawn_blocks = undrawn_blocks[1:]
if B == A: # => A is on Table
world[0, A] = A + 1 # 0 is white thats why!
else:
# See if B is already drawn
i, j = findElemArray2D(B + 1, world)
if len(i):
world[i + 1, j] = A + 1 # 0 is white thats why!
else:
# Put it in the back of the list
undrawn_blocks = np.hstack((undrawn_blocks, [A]))
if self.domain_fig is None:
plt.figure("Domain")
self.domain_fig = plt.imshow(
world,
cmap='BlocksWorld',
origin='lower',
interpolation='nearest') # ,vmin=0,vmax=self.blocks)
plt.xticks(np.arange(self.blocks), fontsize=FONTSIZE)
plt.yticks(np.arange(self.blocks), fontsize=FONTSIZE)
# pl.tight_layout()
plt.axis('off')
plt.show()
else:
self.domain_fig.set_data(world)
plt.figure("Domain").canvas.draw()
plt.figure("Domain").canvas.flush_events()
def showDomain(self, a):
if self.gcf is None:
self.gcf = plt.gcf()
s = self.state
# Plot the car
x, y, speed, heading = s
car_xmin = x - self.REAR_WHEEL_RELATIVE_LOC
car_ymin = y - self.CAR_WIDTH / 2.
if self.domain_fig is None: # Need to initialize the figure
self.domain_fig = plt.figure()
# Goal
plt.gca(
).add_patch(
plt.Circle(
self.GOAL,
radius=self.GOAL_RADIUS,
color='g',
alpha=.4))
plt.xlim([self.XMIN, self.XMAX])
plt.ylim([self.YMIN, self.YMAX])
plt.gca().set_aspect('1')
# Car
if self.car_fig is not None:
plt.gca().patches.remove(self.car_fig)
if self.slips:
slip_x, slip_y = zip(*self.slips)
try:
line = plt.axes().lines[0]
if len(line.get_xdata()) != len(slip_x): # if plot has discrepancy from data
line.set_xdata(slip_x)
line.set_ydata(slip_y)
except IndexError:
plt.plot(slip_x, slip_y, 'x', color='b')
self.car_fig = mpatches.Rectangle(
[car_xmin,
car_ymin],
self.CAR_LENGTH,
self.CAR_WIDTH,
alpha=.4)
rotation = mpl.transforms.Affine2D().rotate_deg_around(
x, y, heading * 180 / np.pi) + plt.gca().transData
self.car_fig.set_transform(rotation)
plt.gca().add_patch(self.car_fig)
plt.draw()
# self.gcf.canvas.draw()
plt.pause(0.001)
def showDomain(self, a=0, s=None):
"""
shows a live graph of each concentration
"""
# only update the graph every couple of steps, otherwise it is
# extremely slow
if self.t % self.show_domain_every != 0 and not self.t >= self.episodeCap:
return
n = self.state_space_dims + 1
names = list(self.state_names) + ["Action"]
colors = ["b", "b", "b", "b", "r", "g", "k"]
handles = getattr(self, "_state_graph_handles", None)
plt.figure("Domain", figsize=(12, 10))
if handles is None:
handles = []
f, axes = plt.subplots(
n, sharex=True, num="Domain", figsize=(12, 10))
f.subplots_adjust(hspace=0.1)
for i in range(n):
ax = axes[i]
d = np.arange(self.episodeCap + 1) * 5
ax.set_ylabel(names[i])
ax.locator_params(tight=True, nbins=4)
handles.append(
ax.plot(d,
self.episode_data[i],
color=colors[i])[0])
self._state_graph_handles = handles
ax.set_xlabel("Days")
for i in range(n):
handles[i].set_ydata(self.episode_data[i])
ax = handles[i].get_axes()
ax.relim()
ax.autoscale_view()
plt.draw()
def showDomain(self, a=0, s=None):
"""
shows a live graph of each concentration
"""
# only update the graph every couple of steps, otherwise it is
# extremely slow
if self.t % self.show_domain_every != 0 and not self.t >= self.episodeCap:
return
n = self.state_space_dims + 1
names = list(self.state_names) + ["Action"]
colors = ["b", "b", "b", "b", "r", "g", "k"]
handles = getattr(self, "_state_graph_handles", None)
plt.figure("Domain", figsize=(12, 10))
if handles is None:
handles = []
f, axes = plt.subplots(n,
sharex=True,
num="Domain",
figsize=(12, 10))
f.subplots_adjust(hspace=0.1)
for i in range(n):
ax = axes[i]
d = np.arange(self.episodeCap + 1) * 5
ax.set_ylabel(names[i])
ax.locator_params(tight=True, nbins=4)
handles.append(
ax.plot(d, self.episode_data[i], color=colors[i])[0])
self._state_graph_handles = handles
ax.set_xlabel("Days")
for i in range(n):
handles[i].set_ydata(self.episode_data[i])
ax = handles[i].get_axes()
ax.relim()
ax.autoscale_view()
plt.draw()
def showDomain(self, a=0):
# Draw the environment
s = self.state
s = s[0]
if self.circles is None:
fig = plt.figure(1, (self.chainSize * 2, 2))
ax = fig.add_axes([0, 0, 1, 1], frameon=False, aspect=1.)
ax.set_xlim(0, self.chainSize * 2)
ax.set_ylim(0, 2)
# Make the last one double circle
ax.add_patch(
mpatches.Circle((1 + 2 * (self.chainSize - 1), self.Y), self.RADIUS * 1.1, fc="w"))
ax.xaxis.set_visible(False)
ax.yaxis.set_visible(False)
self.circles = [mpatches.Circle((1 + 2 * i, self.Y), self.RADIUS, fc="w")
for i in range(self.chainSize)]
for i in range(self.chainSize):
ax.add_patch(self.circles[i])
if i != self.chainSize - 1:
fromAtoB(
1 + 2 * i + self.SHIFT,
self.Y + self.SHIFT,
1 + 2 * (i + 1) - self.SHIFT,
self.Y + self.SHIFT)
if i != self.chainSize - 2:
fromAtoB(
1 + 2 * (i + 1) - self.SHIFT,
self.Y - self.SHIFT,
1 + 2 * i + self.SHIFT,
self.Y - self.SHIFT,
'r')
fromAtoB(
.75,
self.Y -
1.5 *
self.SHIFT,
.75,
self.Y +
1.5 *
self.SHIFT,
'r',
connectionstyle='arc3,rad=-1.2')
plt.show()
[p.set_facecolor('w') for p in self.circles]
self.circles[s].set_facecolor('k')
plt.draw()
def plot_trials(self,
y="eps_return",
x="learning_steps",
average=10,
save=False):
"""Plots the performance of the experiment
This function has only limited capabilities.
For more advanced plotting of results consider
:py:class:`Tools.Merger.Merger`.
"""
def movingaverage(interval, window_size):
window = np.ones(int(window_size)) / float(window_size)
return np.convolve(interval, window, 'same')
labels = rlpy.Tools.results.default_labels
performance_fig = plt.figure("Performance")
trials = self.trials
y_arr = np.array(trials[y])
if average:
assert type(average) is int, "Filter length is not an integer!"
y_arr = movingaverage(y_arr, average)
plt.plot(trials[x], y_arr, '-bo', lw=3, markersize=10)
plt.xlim(0, trials[x][-1] * 1.01)
m = y_arr.min()
M = y_arr.max()
delta = M - m
if delta > 0:
plt.ylim(m - .1 * delta - .1, M + .1 * delta + .1)
xlabel = labels[x] if x in labels else x
ylabel = labels[y] if y in labels else y
plt.xlabel(xlabel, fontsize=16)
plt.ylabel(ylabel, fontsize=16)
if save:
path = os.path.join(self.full_path,
"{:3}-trials.pdf".format(self.exp_id))
performance_fig.savefig(path, transparent=True, pad_inches=.1)
plt.ioff()
plt.show()
def showDomain(self, a):
s = self.state
# Draw the environment
if self.domain_fig is None:
plt.figure("Domain")
self.domain_fig = plt.imshow(
self.map,
cmap='IntruderMonitoring',
interpolation='nearest',
vmin=0,
vmax=3)
plt.xticks(np.arange(self.COLS), fontsize=FONTSIZE)
plt.yticks(np.arange(self.ROWS), fontsize=FONTSIZE)
plt.show()
if self.ally_fig is not None:
self.ally_fig.pop(0).remove()
self.intruder_fig.pop(0).remove()
s_ally = s[0:self.NUMBER_OF_AGENTS * 2].reshape((-1, 2))
s_intruder = s[self.NUMBER_OF_AGENTS * 2:].reshape((-1, 2))
self.ally_fig = plt.plot(
s_ally[:,
1],
s_ally[:,
0],
'bo',
markersize=30.0,
alpha=.7,
markeredgecolor='k',
markeredgewidth=2)
self.intruder_fig = plt.plot(
s_intruder[:,
1],
s_intruder[:,
0],
'g>',
color='gray',
markersize=30.0,
alpha=.7,
markeredgecolor='k',
markeredgewidth=2)
plt.figure("Domain").canvas.draw()
plt.figure("Domain").canvas.flush_events()
def showDomain(self, a):
s = self.state
# Draw the environment
if self.domain_fig is None:
plt.figure("Domain")
self.domain_fig = plt.imshow(self.map,
cmap='IntruderMonitoring',
interpolation='nearest',
vmin=0,
vmax=3)
plt.xticks(np.arange(self.COLS), fontsize=FONTSIZE)
plt.yticks(np.arange(self.ROWS), fontsize=FONTSIZE)
plt.show()
if self.ally_fig is not None:
self.ally_fig.pop(0).remove()
self.intruder_fig.pop(0).remove()
s_ally = s[0:self.NUMBER_OF_AGENTS * 2].reshape((-1, 2))
s_intruder = s[self.NUMBER_OF_AGENTS * 2:].reshape((-1, 2))
self.ally_fig = plt.plot(s_ally[:, 1],
s_ally[:, 0],
'bo',
markersize=30.0,
alpha=.7,
markeredgecolor='k',
markeredgewidth=2)
self.intruder_fig = plt.plot(s_intruder[:, 1],
s_intruder[:, 0],
'g>',
color='gray',
markersize=30.0,
alpha=.7,
markeredgecolor='k',
markeredgewidth=2)
plt.figure("Domain").canvas.draw()
plt.figure("Domain").canvas.flush_events()
def showLearning(self, representation):
if self.valueFunction_fig is None:
plt.figure("Value Function")
self.valueFunction_fig = plt.imshow(self.map,
cmap='ValueFunction',
interpolation='nearest',
vmin=self.MIN_RETURN,
vmax=self.MAX_RETURN)
plt.xticks(np.arange(self.COLS), fontsize=12)
plt.yticks(np.arange(self.ROWS), fontsize=12)
# Create quivers for each action. 4 in total
X = np.arange(self.ROWS) - self.SHIFT
Y = np.arange(self.COLS)
X, Y = np.meshgrid(X, Y)
DX = DY = np.ones(X.shape)
C = np.zeros(X.shape)
C[0, 0] = 1 # Making sure C has both 0 and 1
# length of arrow/width of bax. Less then 0.5 because each arrow is
# offset, 0.4 looks nice but could be better/auto generated
arrow_ratio = 0.4
Max_Ratio_ArrowHead_to_ArrowLength = 0.25
ARROW_WIDTH = 0.5 * Max_Ratio_ArrowHead_to_ArrowLength / 5.0
self.upArrows_fig = plt.quiver(Y,
X,
DY,
DX,
C,
units='y',
cmap='Actions',
scale_units="height",
scale=self.ROWS / arrow_ratio,
width=-1 * ARROW_WIDTH)
self.upArrows_fig.set_clim(vmin=0, vmax=1)
X = np.arange(self.ROWS) + self.SHIFT
Y = np.arange(self.COLS)
X, Y = np.meshgrid(X, Y)
self.downArrows_fig = plt.quiver(Y,
X,
DY,
DX,
C,
units='y',
cmap='Actions',
scale_units="height",
scale=self.ROWS / arrow_ratio,
width=-1 * ARROW_WIDTH)
self.downArrows_fig.set_clim(vmin=0, vmax=1)
X = np.arange(self.ROWS)
Y = np.arange(self.COLS) - self.SHIFT
X, Y = np.meshgrid(X, Y)
self.leftArrows_fig = plt.quiver(Y,
X,
DY,
DX,
C,
units='x',
cmap='Actions',
scale_units="width",
scale=self.COLS / arrow_ratio,
width=ARROW_WIDTH)
self.leftArrows_fig.set_clim(vmin=0, vmax=1)
X = np.arange(self.ROWS)
Y = np.arange(self.COLS) + self.SHIFT
X, Y = np.meshgrid(X, Y)
self.rightArrows_fig = plt.quiver(Y,
X,
DY,
DX,
C,
units='x',
cmap='Actions',
scale_units="width",
scale=self.COLS / arrow_ratio,
width=ARROW_WIDTH)
self.rightArrows_fig.set_clim(vmin=0, vmax=1)
plt.show()
plt.figure("Value Function")
V = np.zeros((self.ROWS, self.COLS))
# Boolean 3 dimensional array. The third array highlights the action.
# Thie mask is used to see in which cells what actions should exist
Mask = np.ones((self.COLS, self.ROWS, self.actions_num), dtype='bool')
arrowSize = np.zeros((self.COLS, self.ROWS, self.actions_num),
dtype='float')
# 0 = suboptimal action, 1 = optimal action
arrowColors = np.zeros((self.COLS, self.ROWS, self.actions_num),
dtype='uint8')
for r in xrange(self.ROWS):
for c in xrange(self.COLS):
if self.map[r, c] == self.BLOCKED:
V[r, c] = 0
if self.map[r, c] == self.GOAL:
V[r, c] = self.MAX_RETURN
if self.map[r, c] == self.PIT:
V[r, c] = self.MIN_RETURN
if self.map[r, c] == self.EMPTY or self.map[r,
c] == self.START:
s = np.array([r, c])
As = self.possibleActions(s)
terminal = self.isTerminal(s)
Qs = representation.Qs(s, terminal)
bestA = representation.bestActions(s, terminal, As)
V[r, c] = max(Qs[As])
Mask[c, r, As] = False
arrowColors[c, r, bestA] = 1
for i in xrange(len(As)):
a = As[i]
Q = Qs[i]
value = linearMap(Q, self.MIN_RETURN, self.MAX_RETURN,
0, 1)
arrowSize[c, r, a] = value
# Show Value Function
self.valueFunction_fig.set_data(V)
# Show Policy Up Arrows
DX = arrowSize[:, :, 0]
DY = np.zeros((self.ROWS, self.COLS))
DX = np.ma.masked_array(DX, mask=Mask[:, :, 0])
DY = np.ma.masked_array(DY, mask=Mask[:, :, 0])
C = np.ma.masked_array(arrowColors[:, :, 0], mask=Mask[:, :, 0])
self.upArrows_fig.set_UVC(DY, DX, C)
# Show Policy Down Arrows
DX = -arrowSize[:, :, 1]
DY = np.zeros((self.ROWS, self.COLS))
DX = np.ma.masked_array(DX, mask=Mask[:, :, 1])
DY = np.ma.masked_array(DY, mask=Mask[:, :, 1])
C = np.ma.masked_array(arrowColors[:, :, 1], mask=Mask[:, :, 1])
self.downArrows_fig.set_UVC(DY, DX, C)
# Show Policy Left Arrows
DX = np.zeros((self.ROWS, self.COLS))
DY = -arrowSize[:, :, 2]
DX = np.ma.masked_array(DX, mask=Mask[:, :, 2])
DY = np.ma.masked_array(DY, mask=Mask[:, :, 2])
C = np.ma.masked_array(arrowColors[:, :, 2], mask=Mask[:, :, 2])
self.leftArrows_fig.set_UVC(DY, DX, C)
# Show Policy Right Arrows
DX = np.zeros((self.ROWS, self.COLS))
DY = arrowSize[:, :, 3]
DX = np.ma.masked_array(DX, mask=Mask[:, :, 3])
DY = np.ma.masked_array(DY, mask=Mask[:, :, 3])
C = np.ma.masked_array(arrowColors[:, :, 3], mask=Mask[:, :, 3])
self.rightArrows_fig.set_UVC(DY, DX, C)
plt.draw()
def showDomain(self, a=0):
s = self.state
if self.domain_fig is None:
self.domain_fig = plt.figure(
1, (UAVLocation.SIZE * self.dist_between_locations + 1,
self.NUM_UAV + 1))
plt.show()
plt.clf()
# Draw the environment
# Allocate horizontal 'lanes' for UAVs to traverse
# Formerly, we checked if this was the first time plotting; wedge shapes cannot be removed from
# matplotlib environment, nor can their properties be changed, without clearing the figure
# Thus, we must redraw the figure on each timestep
# if self.location_rect_vis is None:
# Figure with x width corresponding to number of location states, UAVLocation.SIZE
# and rows (lanes) set aside in y for each UAV (NUM_UAV total lanes).
# Add buffer of 1
self.subplot_axes = self.domain_fig.add_axes([0, 0, 1, 1],
frameon=False,
aspect=1.)
crashLocationX = 2 * \
(self.dist_between_locations) * (UAVLocation.SIZE - 1)
self.subplot_axes.set_xlim(0, 1 + crashLocationX + self.RECT_GAP)
self.subplot_axes.set_ylim(0, 1 + self.NUM_UAV)
self.subplot_axes.xaxis.set_visible(False)
self.subplot_axes.yaxis.set_visible(False)
# Assign coordinates of each possible uav location on figure
self.location_coord = [
0.5 + (self.LOCATION_WIDTH / 2) + (self.dist_between_locations) * i
for i in range(UAVLocation.SIZE - 1)
]
self.location_coord.append(crashLocationX + self.LOCATION_WIDTH / 2)
# Create rectangular patches at each of those locations
self.location_rect_vis = [
mpatches.Rectangle([0.5 + (self.dist_between_locations) * i, 0],
self.LOCATION_WIDTH,
self.NUM_UAV * 2,
fc='w') for i in range(UAVLocation.SIZE - 1)
]
self.location_rect_vis.append(
mpatches.Rectangle([crashLocationX, 0],
self.LOCATION_WIDTH,
self.NUM_UAV * 2,
fc='w'))
[
self.subplot_axes.add_patch(self.location_rect_vis[i])
for i in range(4)
]
self.comms_line = [
lines.Line2D([
0.5 + self.LOCATION_WIDTH +
(self.dist_between_locations) * i, 0.5 + self.LOCATION_WIDTH +
(self.dist_between_locations) * i + self.RECT_GAP
], [self.NUM_UAV * 0.5 + 0.5, self.NUM_UAV * 0.5 + 0.5],
linewidth=3,
color='black',
visible=False) for i in range(UAVLocation.SIZE - 2)
]
self.comms_line.append(
lines.Line2D([
0.5 + self.LOCATION_WIDTH +
(self.dist_between_locations) * 2, crashLocationX
], [self.NUM_UAV * 0.5 + 0.5, self.NUM_UAV * 0.5 + 0.5],
linewidth=3,
color='black',
visible=False))
# Create location text below rectangles
locText = ["Base", "Refuel", "Communication", "Surveillance"]
self.location_rect_txt = [
plt.text(0.5 + self.dist_between_locations * i +
0.5 * self.LOCATION_WIDTH,
-0.3,
locText[i],
ha='center') for i in range(UAVLocation.SIZE - 1)
]
self.location_rect_txt.append(
plt.text(crashLocationX + 0.5 * self.LOCATION_WIDTH,
-0.3,
locText[UAVLocation.SIZE - 1],
ha='center'))
# Initialize list of circle objects
uav_x = self.location_coord[UAVLocation.BASE]
# Update the member variables storing all the figure objects
self.uav_circ_vis = [
mpatches.Circle((uav_x, 1 + uav_id), self.UAV_RADIUS, fc="w")
for uav_id in range(0, self.NUM_UAV)
]
self.uav_text_vis = [None for uav_id in range(0, self.NUM_UAV)] # f**k
self.uav_sensor_vis = [
mpatches.Wedge((uav_x + self.SENSOR_REL_X, 1 + uav_id),
self.SENSOR_LENGTH, -30, 30)
for uav_id in range(0, self.NUM_UAV)
]
self.uav_actuator_vis = [
mpatches.Wedge((uav_x, 1 + uav_id + self.ACTUATOR_REL_Y),
self.ACTUATOR_HEIGHT, 60, 120)
for uav_id in range(0, self.NUM_UAV)
]
# The following was executed when we used to check if the environment needed re-drawing: see above.
# Remove all UAV circle objects from visualization
# else:
# [self.uav_circ_vis[uav_id].remove() for uav_id in range(0,self.NUM_UAV)]
# [self.uav_text_vis[uav_id].remove() for uav_id in range(0,self.NUM_UAV)]
# [self.uav_sensor_vis[uav_id].remove() for uav_id in range(0,self.NUM_UAV)]
# For each UAV:
# Draw a circle, with text inside = amt fuel remaining
# Triangle on top of UAV for comms, black = good, red = bad
# Triangle in front of UAV for surveillance
sStruct = self.state2Struct(s)
for uav_id in range(0, self.NUM_UAV):
# Assign all the variables corresponding to this UAV for this iteration;
# this could alternately be done with a UAV class whose objects keep track
# of these variables. Elect to use lists here since ultimately the state
# must be a vector anyway.
# State index corresponding to the location of this uav
uav_location = sStruct.locations[uav_id]
uav_fuel = sStruct.fuel[uav_id]
uav_sensor = sStruct.sensor[uav_id]
uav_actuator = sStruct.actuator[uav_id]
# Assign coordinates on figure where UAV should be drawn
uav_x = self.location_coord[uav_location]
uav_y = 1 + uav_id
# Update plot wit this UAV
self.uav_circ_vis[uav_id] = mpatches.Circle((uav_x, uav_y),
self.UAV_RADIUS,
fc="w")
self.uav_text_vis[uav_id] = plt.text(uav_x - 0.05, uav_y - 0.05,
uav_fuel)
if uav_sensor == SensorState.RUNNING:
objColor = 'black'
else:
objColor = 'red'
self.uav_sensor_vis[uav_id] = mpatches.Wedge(
(uav_x + self.SENSOR_REL_X, uav_y),
self.SENSOR_LENGTH,
-30,
30,
color=objColor)
if uav_actuator == ActuatorState.RUNNING:
objColor = 'black'
else:
objColor = 'red'
self.uav_actuator_vis[uav_id] = mpatches.Wedge(
(uav_x, uav_y + self.ACTUATOR_REL_Y),
self.ACTUATOR_HEIGHT,
60,
120,
color=objColor)
self.subplot_axes.add_patch(self.uav_circ_vis[uav_id])
self.subplot_axes.add_patch(self.uav_sensor_vis[uav_id])
self.subplot_axes.add_patch(self.uav_actuator_vis[uav_id])
numHealthySurveil = np.sum(
np.logical_and(sStruct.locations == UAVLocation.SURVEIL,
sStruct.sensor))
# We have comms coverage: draw a line between comms states to show this
if (any(sStruct.locations == UAVLocation.COMMS)):
for i in xrange(len(self.comms_line)):
self.comms_line[i].set_visible(True)
self.comms_line[i].set_color('black')
self.subplot_axes.add_line(self.comms_line[i])
# We also have UAVs in surveillance; color the comms line black
if numHealthySurveil > 0:
self.location_rect_vis[len(self.location_rect_vis) -
1].set_color('green')
plt.draw()
sleep(0.5)
def showDomain(self, a=0):
s = self.state
plt.figure("Domain")
if self.networkGraph is None: # or self.networkPos is None:
self.networkGraph = nx.Graph()
# enumerate all computer_ids, simulatenously iterating through
# neighbors list and compstatus
for computer_id, (neighbors,
compstatus) in enumerate(zip(self.NEIGHBORS, s)):
# Add a node to network for each computer
self.networkGraph.add_node(computer_id, node_color="w")
for uniqueEdge in self.UNIQUE_EDGES:
self.networkGraph.add_edge(
uniqueEdge[0], uniqueEdge[1],
edge_color="k") # Add an edge between each neighbor
self.networkPos = nx.circular_layout(self.networkGraph)
nx.draw_networkx_nodes(self.networkGraph,
self.networkPos,
node_color="w")
nx.draw_networkx_edges(self.networkGraph,
self.networkPos,
edges_color="k")
nx.draw_networkx_labels(self.networkGraph, self.networkPos)
plt.show()
else:
plt.clf()
blackEdges = []
redEdges = []
greenNodes = []
redNodes = []
for computer_id, (neighbors,
compstatus) in enumerate(zip(self.NEIGHBORS, s)):
if (compstatus == self.RUNNING):
greenNodes.append(computer_id)
else:
redNodes.append(computer_id)
# Iterate through all unique edges
for uniqueEdge in self.UNIQUE_EDGES:
if (s[uniqueEdge[0]] == self.RUNNING
and s[uniqueEdge[1]] == self.RUNNING):
# Then both computers are working
blackEdges.append(uniqueEdge)
else: # If either computer is BROKEN, make the edge red
redEdges.append(uniqueEdge)
# "if redNodes", etc. - only draw things in the network if these lists aren't empty / null
if redNodes:
nx.draw_networkx_nodes(self.networkGraph,
self.networkPos,
nodelist=redNodes,
node_color="r",
linewidths=2)
if greenNodes:
nx.draw_networkx_nodes(self.networkGraph,
self.networkPos,
nodelist=greenNodes,
node_color="w",
linewidths=2)
if blackEdges:
nx.draw_networkx_edges(self.networkGraph,
self.networkPos,
edgelist=blackEdges,
edge_color="k",
width=2,
style='solid')
if redEdges:
nx.draw_networkx_edges(self.networkGraph,
self.networkPos,
edgelist=redEdges,
edge_color="k",
width=2,
style='dotted')
nx.draw_networkx_labels(self.networkGraph, self.networkPos)
plt.figure("Domain").canvas.draw()
plt.figure("Domain").canvas.flush_events()
kernel_args=[kernel_width],
active_threshold=active_threshold,
discover_threshold=discover_threshold,
normalization=False,
max_active_base_feat=100,
max_base_feat_sim=max_base_feat_sim)
policy = SwimmerPolicy(representation)
#policy = eGreedy(representation, epsilon=0.1)
stat_bins_per_state_dim = 20
# agent = SARSA(representation,policy,domain,initial_learn_rate=initial_learn_rate,
# lambda_=.0, learn_rate_decay_mode="boyan", boyan_N0=boyan_N0)
opt["agent"] = SARSA(
policy, representation, discount_factor=domain.discount_factor,
lambda_=lambda_, initial_learn_rate=initial_learn_rate,
learn_rate_decay_mode="boyan", boyan_N0=boyan_N0)
experiment = Experiment(**opt)
return experiment
if __name__ == '__main__':
from rlpy.Tools.run import run_profiled
# run_profiled(make_experiment)
experiment = make_experiment(1)
experiment.run(visualize_performance=1, visualize_learning=True)
# experiment.plot()
# experiment.save()
from rlpy.Tools import plt
plt.figure()
for i in range(9):
plt.plot(experiment.state_counts_learn[i], label="Dim " + str(i))
plt.legend()
def showExploration(self):
plt.figure()
plt.scatter([i[0] for i in self.visited_states],[i[1] for i in self.visited_states], color='k')
plt.scatter([self.src['x']],[self.src['y']], color='r')
plt.scatter([self.target['x']],[self.target['y']], color='b')
plt.show()
def showLearning(self, representation):
if self.valueFunction_fig is None:
plt.figure("Value Function")
self.valueFunction_fig = plt.imshow(
self.map,
cmap='ValueFunction',
interpolation='nearest',
vmin=self.MIN_RETURN,
vmax=self.MAX_RETURN)
plt.xticks(np.arange(self.COLS), fontsize=12)
plt.yticks(np.arange(self.ROWS), fontsize=12)
# Create quivers for each action. 4 in total
X = np.arange(self.ROWS) - self.SHIFT
Y = np.arange(self.COLS)
X, Y = np.meshgrid(X, Y)
DX = DY = np.ones(X.shape)
C = np.zeros(X.shape)
C[0, 0] = 1 # Making sure C has both 0 and 1
# length of arrow/width of bax. Less then 0.5 because each arrow is
# offset, 0.4 looks nice but could be better/auto generated
arrow_ratio = 0.4
Max_Ratio_ArrowHead_to_ArrowLength = 0.25
ARROW_WIDTH = 0.5 * Max_Ratio_ArrowHead_to_ArrowLength / 5.0
self.upArrows_fig = plt.quiver(
Y,
X,
DY,
DX,
C,
units='y',
cmap='Actions',
scale_units="height",
scale=self.ROWS /
arrow_ratio,
width=-
1 *
ARROW_WIDTH)
self.upArrows_fig.set_clim(vmin=0, vmax=1)
X = np.arange(self.ROWS) + self.SHIFT
Y = np.arange(self.COLS)
X, Y = np.meshgrid(X, Y)
self.downArrows_fig = plt.quiver(
Y,
X,
DY,
DX,
C,
units='y',
cmap='Actions',
scale_units="height",
scale=self.ROWS /
arrow_ratio,
width=-
1 *
ARROW_WIDTH)
self.downArrows_fig.set_clim(vmin=0, vmax=1)
X = np.arange(self.ROWS)
Y = np.arange(self.COLS) - self.SHIFT
X, Y = np.meshgrid(X, Y)
self.leftArrows_fig = plt.quiver(
Y,
X,
DY,
DX,
C,
units='x',
cmap='Actions',
scale_units="width",
scale=self.COLS /
arrow_ratio,
width=ARROW_WIDTH)
self.leftArrows_fig.set_clim(vmin=0, vmax=1)
X = np.arange(self.ROWS)
Y = np.arange(self.COLS) + self.SHIFT
X, Y = np.meshgrid(X, Y)
self.rightArrows_fig = plt.quiver(
Y,
X,
DY,
DX,
C,
units='x',
cmap='Actions',
scale_units="width",
scale=self.COLS /
arrow_ratio,
width=ARROW_WIDTH)
self.rightArrows_fig.set_clim(vmin=0, vmax=1)
plt.show()
plt.figure("Value Function")
V = np.zeros((self.ROWS, self.COLS))
# Boolean 3 dimensional array. The third array highlights the action.
# Thie mask is used to see in which cells what actions should exist
Mask = np.ones(
(self.COLS,
self.ROWS,
self.actions_num),
dtype='bool')
arrowSize = np.zeros(
(self.COLS,
self.ROWS,
self.actions_num),
dtype='float')
# 0 = suboptimal action, 1 = optimal action
arrowColors = np.zeros(
(self.COLS,
self.ROWS,
self.actions_num),
dtype='uint8')
for r in xrange(self.ROWS):
for c in xrange(self.COLS):
if self.map[r, c] == self.BLOCKED:
V[r, c] = 0
if self.map[r, c] == self.GOAL:
V[r, c] = self.MAX_RETURN
if self.map[r, c] == self.PIT:
V[r, c] = self.MIN_RETURN
if self.map[r, c] == self.EMPTY or self.map[r, c] == self.START:
s = np.array([r, c])
As = self.possibleActions(s)
terminal = self.isTerminal(s)
Qs = representation.Qs(s, terminal)
bestA = representation.bestActions(s, terminal, As)
V[r, c] = max(Qs[As])
Mask[c, r, As] = False
arrowColors[c, r, bestA] = 1
for i in xrange(len(As)):
a = As[i]
Q = Qs[i]
value = linearMap(
Q,
self.MIN_RETURN,
self.MAX_RETURN,
0,
1)
arrowSize[c, r, a] = value
# Show Value Function
self.valueFunction_fig.set_data(V)
# Show Policy Up Arrows
DX = arrowSize[:, :, 0]
DY = np.zeros((self.ROWS, self.COLS))
DX = np.ma.masked_array(DX, mask=Mask[:, :, 0])
DY = np.ma.masked_array(DY, mask=Mask[:, :, 0])
C = np.ma.masked_array(arrowColors[:, :, 0], mask=Mask[:,:, 0])
self.upArrows_fig.set_UVC(DY, DX, C)
# Show Policy Down Arrows
DX = -arrowSize[:, :, 1]
DY = np.zeros((self.ROWS, self.COLS))
DX = np.ma.masked_array(DX, mask=Mask[:, :, 1])
DY = np.ma.masked_array(DY, mask=Mask[:, :, 1])
C = np.ma.masked_array(arrowColors[:, :, 1], mask=Mask[:,:, 1])
self.downArrows_fig.set_UVC(DY, DX, C)
# Show Policy Left Arrows
DX = np.zeros((self.ROWS, self.COLS))
DY = -arrowSize[:, :, 2]
DX = np.ma.masked_array(DX, mask=Mask[:, :, 2])
DY = np.ma.masked_array(DY, mask=Mask[:, :, 2])
C = np.ma.masked_array(arrowColors[:, :, 2], mask=Mask[:,:, 2])
self.leftArrows_fig.set_UVC(DY, DX, C)
# Show Policy Right Arrows
DX = np.zeros((self.ROWS, self.COLS))
DY = arrowSize[:, :, 3]
DX = np.ma.masked_array(DX, mask=Mask[:, :, 3])
DY = np.ma.masked_array(DY, mask=Mask[:, :, 3])
C = np.ma.masked_array(arrowColors[:, :, 3], mask=Mask[:,:, 3])
self.rightArrows_fig.set_UVC(DY, DX, C)
plt.draw()
def showDomain(self, a=0):
s = self.state
if self.domain_fig is None:
plt.figure("Domain")
self.domain_fig = plt.figure(
1, (UAVLocation.SIZE * self.dist_between_locations + 1, self.NUM_UAV + 1))
plt.show()
plt.clf()
# Draw the environment
# Allocate horizontal 'lanes' for UAVs to traverse
# Formerly, we checked if this was the first time plotting; wedge shapes cannot be removed from
# matplotlib environment, nor can their properties be changed, without clearing the figure
# Thus, we must redraw the figure on each timestep
# if self.location_rect_vis is None:
# Figure with x width corresponding to number of location states, UAVLocation.SIZE
# and rows (lanes) set aside in y for each UAV (NUM_UAV total lanes).
# Add buffer of 1
self.subplot_axes = self.domain_fig.add_axes(
[0, 0, 1, 1], frameon=False, aspect=1.)
crashLocationX = 2 * \
(self.dist_between_locations) * (UAVLocation.SIZE - 1)
self.subplot_axes.set_xlim(0, 1 + crashLocationX + self.RECT_GAP)
self.subplot_axes.set_ylim(0, 1 + self.NUM_UAV)
self.subplot_axes.xaxis.set_visible(False)
self.subplot_axes.yaxis.set_visible(False)
# Assign coordinates of each possible uav location on figure
self.location_coord = [0.5 + (old_div(self.LOCATION_WIDTH, 2)) +
(self.dist_between_locations) * i for i in range(UAVLocation.SIZE - 1)]
self.location_coord.append(crashLocationX + old_div(self.LOCATION_WIDTH, 2))
# Create rectangular patches at each of those locations
self.location_rect_vis = [mpatches.Rectangle(
[0.5 + (self.dist_between_locations) * i,
0],
self.LOCATION_WIDTH,
self.NUM_UAV * 2,
fc='w') for i in range(UAVLocation.SIZE - 1)]
self.location_rect_vis.append(
mpatches.Rectangle([crashLocationX,
0],
self.LOCATION_WIDTH,
self.NUM_UAV * 2,
fc='w'))
[self.subplot_axes.add_patch(self.location_rect_vis[i])
for i in range(4)]
self.comms_line = [lines.Line2D(
[0.5 + self.LOCATION_WIDTH + (self.dist_between_locations) * i,
0.5 + self.LOCATION_WIDTH + (
self.dist_between_locations) * i + self.RECT_GAP],
[self.NUM_UAV * 0.5 + 0.5,
self.NUM_UAV * 0.5 + 0.5],
linewidth=3,
color='black',
visible=False) for i in range(UAVLocation.SIZE - 2)]
self.comms_line.append(
lines.Line2D(
[0.5 + self.LOCATION_WIDTH + (self.dist_between_locations) * 2,
crashLocationX],
[self.NUM_UAV * 0.5 + 0.5,
self.NUM_UAV * 0.5 + 0.5],
linewidth=3,
color='black',
visible=False))
# Create location text below rectangles
locText = ["Base", "Refuel", "Communication", "Surveillance"]
self.location_rect_txt = [plt.text(
0.5 + self.dist_between_locations * i + 0.5 * self.LOCATION_WIDTH,
-0.3,
locText[i],
ha='center') for i in range(UAVLocation.SIZE - 1)]
self.location_rect_txt.append(
plt.text(crashLocationX + 0.5 * self.LOCATION_WIDTH, -0.3,
locText[UAVLocation.SIZE - 1], ha='center'))
# Initialize list of circle objects
uav_x = self.location_coord[UAVLocation.BASE]
# Update the member variables storing all the figure objects
self.uav_circ_vis = [mpatches.Circle(
(uav_x,
1 + uav_id),
self.UAV_RADIUS,
fc="w") for uav_id in range(0,
self.NUM_UAV)]
self.uav_text_vis = [None for uav_id in range(0, self.NUM_UAV)] # f**k
self.uav_sensor_vis = [mpatches.Wedge(
(uav_x + self.SENSOR_REL_X,
1 + uav_id),
self.SENSOR_LENGTH,
-30,
30) for uav_id in range(0,
self.NUM_UAV)]
self.uav_actuator_vis = [mpatches.Wedge(
(uav_x,
1 + uav_id + self.ACTUATOR_REL_Y),
self.ACTUATOR_HEIGHT,
60,
120) for uav_id in range(0,
self.NUM_UAV)]
# The following was executed when we used to check if the environment needed re-drawing: see above.
# Remove all UAV circle objects from visualization
# else:
# [self.uav_circ_vis[uav_id].remove() for uav_id in range(0,self.NUM_UAV)]
# [self.uav_text_vis[uav_id].remove() for uav_id in range(0,self.NUM_UAV)]
# [self.uav_sensor_vis[uav_id].remove() for uav_id in range(0,self.NUM_UAV)]
# For each UAV:
# Draw a circle, with text inside = amt fuel remaining
# Triangle on top of UAV for comms, black = good, red = bad
# Triangle in front of UAV for surveillance
sStruct = self.state2Struct(s)
for uav_id in range(0, self.NUM_UAV):
# Assign all the variables corresponding to this UAV for this iteration;
# this could alternately be done with a UAV class whose objects keep track
# of these variables. Elect to use lists here since ultimately the state
# must be a vector anyway.
# State index corresponding to the location of this uav
uav_location = sStruct.locations[uav_id]
uav_fuel = sStruct.fuel[uav_id]
uav_sensor = sStruct.sensor[uav_id]
uav_actuator = sStruct.actuator[uav_id]
# Assign coordinates on figure where UAV should be drawn
uav_x = self.location_coord[uav_location]
uav_y = 1 + uav_id
# Update plot wit this UAV
self.uav_circ_vis[uav_id] = mpatches.Circle(
(uav_x, uav_y), self.UAV_RADIUS, fc="w")
self.uav_text_vis[uav_id] = plt.text(
uav_x - 0.05,
uav_y - 0.05,
uav_fuel)
if uav_sensor == SensorState.RUNNING:
objColor = 'black'
else:
objColor = 'red'
self.uav_sensor_vis[uav_id] = mpatches.Wedge(
(uav_x + self.SENSOR_REL_X,
uav_y),
self.SENSOR_LENGTH,
-30,
30,
color=objColor)
if uav_actuator == ActuatorState.RUNNING:
objColor = 'black'
else:
objColor = 'red'
self.uav_actuator_vis[uav_id] = mpatches.Wedge(
(uav_x,
uav_y + self.ACTUATOR_REL_Y),
self.ACTUATOR_HEIGHT,
60,
120,
color=objColor)
self.subplot_axes.add_patch(self.uav_circ_vis[uav_id])
self.subplot_axes.add_patch(self.uav_sensor_vis[uav_id])
self.subplot_axes.add_patch(self.uav_actuator_vis[uav_id])
numHealthySurveil = np.sum(
np.logical_and(
sStruct.locations == UAVLocation.SURVEIL,
sStruct.sensor))
# We have comms coverage: draw a line between comms states to show this
if (any(sStruct.locations == UAVLocation.COMMS)):
for i in range(len(self.comms_line)):
self.comms_line[i].set_visible(True)
self.comms_line[i].set_color('black')
self.subplot_axes.add_line(self.comms_line[i])
# We also have UAVs in surveillance; color the comms line black
if numHealthySurveil > 0:
self.location_rect_vis[
len(self.location_rect_vis) - 1].set_color('green')
plt.figure("Domain").canvas.draw()
plt.figure("Domain").canvas.flush_events()
sleep(0.5)
kernel_args=[kernel_width],
active_threshold=active_threshold,
discover_threshold=discover_threshold,
normalization=False,
max_active_base_feat=100,
max_base_feat_sim=max_base_feat_sim)
policy = SwimmerPolicy(representation)
#policy = eGreedy(representation, epsilon=0.1)
stat_bins_per_state_dim = 20
# agent = SARSA(representation,policy,domain,initial_learn_rate=initial_learn_rate,
# lambda_=.0, learn_rate_decay_mode="boyan", boyan_N0=boyan_N0)
opt["agent"] = SARSA(
policy, representation, discount_factor=domain.discount_factor,
lambda_=lambda_, initial_learn_rate=initial_learn_rate,
learn_rate_decay_mode="boyan", boyan_N0=boyan_N0)
experiment = Experiment(**opt)
return experiment
if __name__ == '__main__':
from rlpy.Tools.run import run_profiled
# run_profiled(make_experiment)
experiment = make_experiment(1)
experiment.run(visualize_performance=1, visualize_learning=True)
# experiment.plot()
# experiment.save()
from rlpy.Tools import plt
plt.figure()
for i in range(9):
plt.plot(experiment.state_counts_learn[i], label="Dim " + str(i))
plt.legend()
def showDomain(self, a=0):
s = self.state
plt.figure("Domain")
if self.networkGraph is None: # or self.networkPos is None:
self.networkGraph = nx.Graph()
# enumerate all computer_ids, simulatenously iterating through
# neighbors list and compstatus
for computer_id, (neighbors, compstatus) in enumerate(zip(self.NEIGHBORS, s)):
# Add a node to network for each computer
self.networkGraph.add_node(computer_id, node_color="w")
for uniqueEdge in self.UNIQUE_EDGES:
self.networkGraph.add_edge(
uniqueEdge[0],
uniqueEdge[1],
edge_color="k") # Add an edge between each neighbor
self.networkPos = nx.circular_layout(self.networkGraph)
nx.draw_networkx_nodes(
self.networkGraph,
self.networkPos,
node_color="w")
nx.draw_networkx_edges(
self.networkGraph,
self.networkPos,
edges_color="k")
nx.draw_networkx_labels(self.networkGraph, self.networkPos)
plt.show()
else:
plt.clf()
blackEdges = []
redEdges = []
greenNodes = []
redNodes = []
for computer_id, (neighbors, compstatus) in enumerate(zip(self.NEIGHBORS, s)):
if(compstatus == self.RUNNING):
greenNodes.append(computer_id)
else:
redNodes.append(computer_id)
# Iterate through all unique edges
for uniqueEdge in self.UNIQUE_EDGES:
if(s[uniqueEdge[0]] == self.RUNNING and s[uniqueEdge[1]] == self.RUNNING):
# Then both computers are working
blackEdges.append(uniqueEdge)
else: # If either computer is BROKEN, make the edge red
redEdges.append(uniqueEdge)
# "if redNodes", etc. - only draw things in the network if these lists aren't empty / null
if redNodes:
nx.draw_networkx_nodes(
self.networkGraph,
self.networkPos,
nodelist=redNodes,
node_color="r",
linewidths=2)
if greenNodes:
nx.draw_networkx_nodes(
self.networkGraph,
self.networkPos,
nodelist=greenNodes,
node_color="w",
linewidths=2)
if blackEdges:
nx.draw_networkx_edges(
self.networkGraph,
self.networkPos,
edgelist=blackEdges,
edge_color="k",
width=2,
style='solid')
if redEdges:
nx.draw_networkx_edges(
self.networkGraph,
self.networkPos,
edgelist=redEdges,
edge_color="k",
width=2,
style='dotted')
nx.draw_networkx_labels(self.networkGraph, self.networkPos)
plt.figure("Domain").canvas.draw()
plt.figure("Domain").canvas.flush_events()
def showDomain(self, a):
s = self.state
# Plot the car and an arrow indicating the direction of accelaration
# Parts of this code was adopted from Jose Antonio Martin H.
# <*****@*****.**> online source code
pos, vel = s
if self.domain_fig is None: # Need to initialize the figure
self.domain_fig = plt.figure("Mountain Car Domain")
# plot mountain
mountain_x = np.linspace(self.XMIN, self.XMAX, 1000)
mountain_y = np.sin(3 * mountain_x)
plt.gca(
).fill_between(mountain_x,
min(mountain_y) - self.CAR_HEIGHT * 2,
mountain_y,
color='g')
plt.xlim([self.XMIN - .2, self.XMAX])
plt.ylim(
[min(mountain_y) - self.CAR_HEIGHT * 2,
max(mountain_y) + self.CAR_HEIGHT * 2])
# plot car
self.car = lines.Line2D([], [], linewidth=20, color='b', alpha=.8)
plt.gca().add_line(self.car)
# Goal
plt.plot(self.GOAL, np.sin(3 * self.GOAL), 'yd', markersize=10.0)
plt.axis('off')
plt.gca().set_aspect('1')
self.domain_fig = plt.figure("Mountain Car Domain")
#pos = 0
#a = 0
car_middle_x = pos
car_middle_y = np.sin(3 * pos)
slope = np.arctan(3 * np.cos(3 * pos))
car_back_x = car_middle_x - self.CAR_WIDTH * np.cos(slope) / 2.
car_front_x = car_middle_x + self.CAR_WIDTH * np.cos(slope) / 2.
car_back_y = car_middle_y - self.CAR_WIDTH * np.sin(slope) / 2.
car_front_y = car_middle_y + self.CAR_WIDTH * np.sin(slope) / 2.
self.car.set_data([car_back_x, car_front_x], [car_back_y, car_front_y])
# wheels
# plott(x(1)-0.05,sin(3*(x(1)-0.05))+0.06,'ok','markersize',12,'MarkerFaceColor',[.5 .5 .5]);
# plot(x(1)+0.05,sin(3*(x(1)+0.05))+0.06,'ok','markersize',12,'MarkerFaceColor',[.5 .5 .5]);
# Arrows
if self.actionArrow is not None:
self.actionArrow.remove()
self.actionArrow = None
if self.actions[a] > 0:
self.actionArrow = fromAtoB(
car_front_x, car_front_y,
car_front_x + self.ARROW_LENGTH *
np.cos(slope), car_front_y +
self.ARROW_LENGTH * np.sin(slope),
#car_front_x + self.CAR_WIDTH*cos(slope)/2., car_front_y + self.CAR_WIDTH*sin(slope)/2.+self.CAR_HEIGHT,
'k', "arc3,rad=0",
0, 0, 'simple'
)
if self.actions[a] < 0:
self.actionArrow = fromAtoB(
car_back_x, car_back_y,
car_back_x - self.ARROW_LENGTH *
np.cos(slope), car_back_y -
self.ARROW_LENGTH * np.sin(slope),
#car_front_x + self.CAR_WIDTH*cos(slope)/2., car_front_y + self.CAR_WIDTH*sin(slope)/2.+self.CAR_HEIGHT,
'r', "arc3,rad=0",
0, 0, 'simple'
)
plt.draw()
