def _on_key_pressed(self, event):
"""
Override key press to select the current scope if the user wants
to deleted a folded scope (without selecting it).
"""
delete_request = event.key() in [Qt.Key_Backspace, Qt.Key_Delete]
if event.text() or delete_request:
cursor = self.editor.textCursor()
if cursor.hasSelection():
# change selection to encompass the whole scope.
positions_to_check = cursor.selectionStart(
), cursor.selectionEnd()
else:
positions_to_check = (cursor.position(), )
for pos in positions_to_check:
block = self.editor.document().findBlock(pos)
th = TextBlockHelper()
if th.is_fold_trigger(block) and th.is_collapsed(block):
self.toggle_fold_trigger(block)
if delete_request and cursor.hasSelection():
scope = FoldScope(self.find_parent_scope(block))
tc = TextHelper(
self.editor).select_lines(*scope.get_range())
if tc.selectionStart() > cursor.selectionStart():
start = cursor.selectionStart()
else:
start = tc.selectionStart()
if tc.selectionEnd() < cursor.selectionEnd():
end = cursor.selectionEnd()
else:
end = tc.selectionEnd()
tc.setPosition(start)
tc.setPosition(end, tc.KeepAnchor)
self.editor.setTextCursor(tc)
def _on_key_pressed(self, event):
"""
Override key press to select the current scope if the user wants
to deleted a folded scope (without selecting it).
"""
delete_request = event.key() in [Qt.Key_Backspace,
Qt.Key_Delete]
if event.text() or delete_request:
cursor = self.editor.textCursor()
if cursor.hasSelection():
# change selection to encompass the whole scope.
positions_to_check = cursor.selectionStart(), cursor.selectionEnd()
else:
positions_to_check = (cursor.position(), )
for pos in positions_to_check:
block = self.editor.document().findBlock(pos)
th = TextBlockHelper()
if th.is_fold_trigger(block) and th.is_collapsed(block):
self.toggle_fold_trigger(block)
if delete_request and cursor.hasSelection():
scope = FoldScope(self.find_parent_scope(block))
tc = TextHelper(self.editor).select_lines(*scope.get_range())
if tc.selectionStart() > cursor.selectionStart():
start = cursor.selectionStart()
else:
start = tc.selectionStart()
if tc.selectionEnd() < cursor.selectionEnd():
end = cursor.selectionEnd()
else:
end = tc.selectionEnd()
tc.setPosition(start)
tc.setPosition(end, tc.KeepAnchor)
self.editor.setTextCursor(tc)
def test_close_quotes(qtbot, editor_close_quotes, text, expected_text,
cursor_column):
"""Test insertion of extra quotes."""
editor = editor_close_quotes
qtbot.keyClicks(editor, text)
assert editor.toPlainText() == expected_text
assert cursor_column == TextHelper(editor).current_column_nbr()
def find(self,
changed=True,
forward=True,
rehighlight=True,
start_highlight_timer=False,
multiline_replace_check=True):
"""Call the find function"""
# When several lines are selected in the editor and replace box is activated,
# dynamic search is deactivated to prevent changing the selection. Otherwise
# we show matching items.
if multiline_replace_check and self.replace_widgets[0].isVisible() and \
len(to_text_string(self.editor.get_selected_text()).splitlines())>1:
return None
text = self.search_text.currentText()
if len(text) == 0:
self.search_text.lineEdit().setStyleSheet("")
if not self.is_code_editor:
# Clears the selection for WebEngine
self.editor.find_text('')
self.change_number_matches()
return None
else:
case = self.case_button.isChecked()
words = self.words_button.isChecked()
regexp = self.re_button.isChecked()
found = self.editor.find_text(text,
changed,
forward,
case=case,
words=words,
regexp=regexp)
self.search_text.lineEdit().setStyleSheet(self.STYLE[found])
if self.is_code_editor and found:
block = self.editor.textCursor().block()
TextHelper(self.editor).unfold_if_colapsed(block)
if rehighlight or not self.editor.found_results:
self.highlight_timer.stop()
if start_highlight_timer:
self.highlight_timer.start()
else:
self.highlight_matches()
else:
self.clear_matches()
number_matches = self.editor.get_number_matches(text, case=case)
if hasattr(self.editor, 'get_match_number'):
match_number = self.editor.get_match_number(text, case=case)
else:
match_number = 0
self.change_number_matches(current_match=match_number,
total_matches=number_matches)
return found
def _draw_fold_region_background(self, block, painter):
"""
Draw the fold region when the mouse is over and non collapsed
indicator.
:param top: Top position
:param block: Current block.
:param painter: QPainter
"""
r = FoldScope(block)
th = TextHelper(self.editor)
start, end = r.get_range(ignore_blank_lines=True)
if start > 0:
top = th.line_pos_from_number(start)
else:
top = 0
bottom = th.line_pos_from_number(end + 1)
h = bottom - top
if h == 0:
h = self.sizeHint().height()
w = self.sizeHint().width()
self._draw_rect(QRectF(0, top, w, h), painter)
def _draw_fold_region_background(self, block, painter):
"""
Draw the fold region when the mouse is over and non collapsed
indicator.
:param top: Top position
:param block: Current block.
:param painter: QPainter
"""
r = FoldScope(block)
th = TextHelper(self.editor)
start, end = r.get_range(ignore_blank_lines=True)
if start > 0:
top = th.line_pos_from_number(start)
else:
top = 0
bottom = th.line_pos_from_number(end + 1)
h = bottom - top
if h == 0:
h = self.sizeHint().height()
w = self.sizeHint().width()
self._draw_rect(QRectF(0, top, w, h), painter)
def mouseMoveEvent(self, event):
"""
Detect mouser over indicator and highlight the current scope in the
editor (up and down decoration arround the foldable text when the mouse
is over an indicator).
:param event: event
"""
super(FoldingPanel, self).mouseMoveEvent(event)
th = TextHelper(self.editor)
line = th.line_nbr_from_position(event.pos().y())
if line >= 0:
block = FoldScope.find_parent_scope(
self.editor.document().findBlockByNumber(line-1))
if TextBlockHelper.is_fold_trigger(block):
if self._mouse_over_line is None:
# mouse enter fold scope
QApplication.setOverrideCursor(
QCursor(Qt.PointingHandCursor))
if self._mouse_over_line != block.blockNumber() and \
self._mouse_over_line is not None:
# fold scope changed, a previous block was highlighter so
# we quickly update our highlighting
self._mouse_over_line = block.blockNumber()
self._highlight_block(block)
else:
# same fold scope, request highlight
self._mouse_over_line = block.blockNumber()
self._highlight_runner.request_job(
self._highlight_block, block)
self._highight_block = block
else:
# no fold scope to highlight, cancel any pending requests
self._highlight_runner.cancel_requests()
self._mouse_over_line = None
QApplication.restoreOverrideCursor()
self.repaint()
def mouseMoveEvent(self, event):
"""
Detect mouser over indicator and highlight the current scope in the
editor (up and down decoration arround the foldable text when the mouse
is over an indicator).
:param event: event
"""
super(FoldingPanel, self).mouseMoveEvent(event)
th = TextHelper(self.editor)
line = th.line_nbr_from_position(event.pos().y())
if line >= 0:
block = FoldScope.find_parent_scope(
self.editor.document().findBlockByNumber(line - 1))
if TextBlockHelper.is_fold_trigger(block):
if self._mouse_over_line is None:
# mouse enter fold scope
QApplication.setOverrideCursor(
QCursor(Qt.PointingHandCursor))
if self._mouse_over_line != block.blockNumber() and \
self._mouse_over_line is not None:
# fold scope changed, a previous block was highlighter so
# we quickly update our highlighting
self._mouse_over_line = block.blockNumber()
self._highlight_surrounding_scopes(block)
else:
# same fold scope, request highlight
self._mouse_over_line = block.blockNumber()
self._highlight_runner.request_job(
self._highlight_surrounding_scopes, block)
self._highight_block = block
else:
# no fold scope to highlight, cancel any pending requests
self._highlight_runner.cancel_requests()
self._mouse_over_line = None
QApplication.restoreOverrideCursor()
self.repaint()
def _refresh_editor_and_scrollbars(self):
"""
Refrehes editor content and scollbars.
We generate a fake resize event to refresh scroll bar.
We have the same problem as described here:
http://www.qtcentre.org/threads/44803 and we apply the same solution
(don't worry, there is no visual effect, the editor does not grow up
at all, even with a value = 500)
"""
TextHelper(self.editor).mark_whole_doc_dirty()
self.editor.repaint()
s = self.editor.size()
s.setWidth(s.width() + 1)
self.editor.resizeEvent(QResizeEvent(self.editor.size(), s))
def find(self, changed=True, forward=True,
rehighlight=True, start_highlight_timer=False, multiline_replace_check=True):
"""Call the find function"""
# When several lines are selected in the editor and replace box is activated,
# dynamic search is deactivated to prevent changing the selection. Otherwise
# we show matching items.
def regexp_error_msg(pattern):
"""Returns None if the pattern is a valid regular expression or
a string describing why the pattern is invalid.
"""
try:
re.compile(pattern)
except re.error as e:
return str(e)
return None
if multiline_replace_check and self.replace_widgets[0].isVisible() and \
len(to_text_string(self.editor.get_selected_text()).splitlines())>1:
return None
text = self.search_text.currentText()
if len(text) == 0:
self.search_text.lineEdit().setStyleSheet("")
if not self.is_code_editor:
# Clears the selection for WebEngine
self.editor.find_text('')
self.change_number_matches()
return None
else:
case = self.case_button.isChecked()
words = self.words_button.isChecked()
regexp = self.re_button.isChecked()
found = self.editor.find_text(text, changed, forward, case=case,
words=words, regexp=regexp)
stylesheet = self.STYLE[found]
tooltip = self.TOOLTIP[found]
if not found and regexp:
error_msg = regexp_error_msg(text)
if error_msg: # special styling for regexp errors
stylesheet = self.STYLE['regexp_error']
tooltip = self.TOOLTIP['regexp_error'] + ': ' + error_msg
self.search_text.lineEdit().setStyleSheet(stylesheet)
self.search_text.setToolTip(tooltip)
if self.is_code_editor and found:
block = self.editor.textCursor().block()
TextHelper(self.editor).unfold_if_colapsed(block)
if rehighlight or not self.editor.found_results:
self.highlight_timer.stop()
if start_highlight_timer:
self.highlight_timer.start()
else:
self.highlight_matches()
else:
self.clear_matches()
number_matches = self.editor.get_number_matches(text, case=case)
if hasattr(self.editor, 'get_match_number'):
match_number = self.editor.get_match_number(text, case=case)
else:
match_number = 0
self.change_number_matches(current_match=match_number,
total_matches=number_matches)
return found