def expressProcessing(self, globalTag, **args):
"""
_expressProcessing_
Proton collision data taking express processing
"""
step = stepALCAPRODUCER(args['skims'])
dqmStep = dqmSeq(args, '')
options = Options()
options.__dict__.update(defaultOptions.__dict__)
options.scenario = self.cbSc
options.step = 'RAW2DIGI,L1Reco,RECO' + step + ',DQM' + dqmStep + ',ENDJOB'
dictIO(options, args)
options.conditions = globalTag
process = cms.Process('RECO')
cb = ConfigBuilder(options, process=process, with_output=True)
# Input source
process.source = cms.Source("NewEventStreamFileReader",
fileNames=cms.untracked.vstring())
cb.prepare()
addMonitoring(process)
return process
def promptReco(self, globalTag, **args):
"""
_promptReco_
Proton collision data taking prompt reco
"""
step = stepALCAPRODUCER(args['skims'])
dqmStep= dqmSeq(args,'')
options = Options()
options.__dict__.update(defaultOptions.__dict__)
options.scenario = self.cbSc
options.step = 'RAW2DIGI,L1Reco,RECO'+self.recoSeq+step+',DQM'+dqmStep+',ENDJOB'
dictIO(options,args)
options.conditions = globalTag
process = cms.Process('RECO')
cb = ConfigBuilder(options, process = process, with_output = True)
# Input source
process.source = cms.Source("PoolSource",
fileNames = cms.untracked.vstring()
)
cb.prepare()
addMonitoring(process)
return process
def expressProcessing(self, globalTag, **args):
"""
_expressProcessing_
Proton collision data taking express processing
"""
skims = args['skims']
# the AlCaReco skims for PCL should only run during AlCaSkimming step which uses the same configuration on the Tier0 side, for this reason we drop them here
pclWkflws = [x for x in skims if "PromptCalibProd" in x]
for wfl in pclWkflws:
skims.remove(wfl)
step = stepALCAPRODUCER(skims)
dqmStep= dqmSeq(args,'')
options = Options()
options.__dict__.update(defaultOptions.__dict__)
options.scenario = self.cbSc
options.step = 'RAW2DIGI,L1Reco,RECO'+step+',DQM'+dqmStep+',ENDJOB'
dictIO(options,args)
options.conditions = globalTag
options.filein = 'tobeoverwritten.xyz'
if 'inputSource' in args:
options.filetype = args['inputSource']
process = cms.Process('RECO')
cb = ConfigBuilder(options, process = process, with_output = True, with_input = True)
cb.prepare()
addMonitoring(process)
return process
def expressProcessing(self, globalTag, **args):
"""
_expressProcessing_
Proton collision data taking express processing
"""
step = stepALCAPRODUCER(args["skims"])
dqmStep = dqmSeq(args, "")
options = Options()
options.__dict__.update(defaultOptions.__dict__)
options.scenario = self.cbSc
options.step = "RAW2DIGI,L1Reco,RECO" + step + ",DQM" + dqmStep + ",ENDJOB"
dictIO(options, args)
options.conditions = globalTag
process = cms.Process("RECO")
cb = ConfigBuilder(options, process=process, with_output=True)
# Input source
process.source = cms.Source("NewEventStreamFileReader", fileNames=cms.untracked.vstring())
cb.prepare()
addMonitoring(process)
return process
def expressProcessing(self, globalTag, **args):
"""
_expressProcessing_
Proton collision data taking express processing
"""
step = stepALCAPRODUCER(args['skims'])
dqmStep = dqmSeq(args, '')
options = Options()
options.__dict__.update(defaultOptions.__dict__)
options.scenario = self.cbSc
options.step = 'RAW2DIGI,L1Reco,RECO' + step + ',DQM' + dqmStep + ',ENDJOB'
dictIO(options, args)
options.conditions = globalTag
options.filein = 'tobeoverwritten.xyz'
if 'inputSource' in args:
options.filetype = args['inputSource']
process = cms.Process('RECO')
cb = ConfigBuilder(options,
process=process,
with_output=True,
with_input=True)
cb.prepare()
addMonitoring(process)
return process
def promptReco(self, globalTag, **args):
"""
_promptReco_
Proton collision data taking prompt reco
"""
step = stepALCAPRODUCER(args['skims'])
dqmStep= dqmSeq(args,'')
options = Options()
options.__dict__.update(defaultOptions.__dict__)
options.scenario = self.cbSc
options.step = 'RAW2DIGI,L1Reco,RECO'+self.recoSeq+step+',DQM'+dqmStep+',ENDJOB'
dictIO(options,args)
options.conditions = gtNameAndConnect(globalTag, args)
process = cms.Process('RECO')
cb = ConfigBuilder(options, process = process, with_output = True)
# Input source
process.source = cms.Source("PoolSource",
fileNames = cms.untracked.vstring()
)
cb.prepare()
addMonitoring(process)
return process
def expressProcessing(self, globalTag, **args):
"""
_expressProcessing_
Proton collision data taking express processing
"""
step = stepALCAPRODUCER(args['skims'])
dqmStep= dqmSeq(args,'')
options = Options()
options.__dict__.update(defaultOptions.__dict__)
options.scenario = self.cbSc
options.step = 'RAW2DIGI,L1Reco,RECO'+step+',DQM'+dqmStep+',ENDJOB'
dictIO(options,args)
options.conditions = globalTag
options.filein = 'tobeoverwritten.xyz'
if 'inputSource' in args:
options.fileType = args['inputSource']
process = cms.Process('RECO')
cb = ConfigBuilder(options, process = process, with_output = True, with_input = True)
cb.prepare()
addMonitoring(process)
return process
def promptReco(self, globalTag, **args):
"""
_promptReco_
Proton collision data taking prompt reco
"""
step = stepALCAPRODUCER(args['skims'])
PhysicsSkimStep = ''
if ("PhysicsSkims" in args) :
PhysicsSkimStep = stepSKIMPRODUCER(args['PhysicsSkims'])
dqmStep = dqmSeq(args,'')
options = Options()
options.__dict__.update(defaultOptions.__dict__)
options.scenario = self.cbSc
if ('nThreads' in args) :
options.nThreads=args['nThreads']
miniAODStep=''
# if miniAOD is asked for - then retrieve the miniaod config
if 'outputs' in args:
for a in args['outputs']:
if a['dataTier'] == 'MINIAOD':
miniAODStep=',PAT'
"""
Unscheduled for all
"""
options.runUnscheduled=True
self._checkRepackedFlag(options, **args)
if 'customs' in args:
options.customisation_file=args['customs']
eiStep=''
if self.addEI:
eiStep=',EI'
options.step = 'RAW2DIGI,L1Reco,RECO'+self.recoSeq+eiStep+step+PhysicsSkimStep+miniAODStep+',DQM'+dqmStep+',ENDJOB'
dictIO(options,args)
options.conditions = gtNameAndConnect(globalTag, args)
process = cms.Process('RECO', cms.ModifierChain(self.eras, self.promptModifiers) )
cb = ConfigBuilder(options, process = process, with_output = True)
# Input source
process.source = cms.Source("PoolSource",
fileNames = cms.untracked.vstring()
)
cb.prepare()
addMonitoring(process)
return process
def promptReco(self, globalTag, **args):
"""
_promptReco_
Proton collision data taking prompt reco
"""
step = stepALCAPRODUCER(args['skims'])
PhysicsSkimStep = ''
if ("PhysicsSkims" in args) :
PhysicsSkimStep = stepSKIMPRODUCER(args['PhysicsSkims'])
dqmStep = dqmSeq(args,'')
options = Options()
options.__dict__.update(defaultOptions.__dict__)
options.scenario = self.cbSc
if ('nThreads' in args) :
options.nThreads=args['nThreads']
miniAODStep=''
# if miniAOD is asked for - then retrieve the miniaod config
if 'outputs' in args:
for a in args['outputs']:
if a['dataTier'] == 'MINIAOD':
miniAODStep=',PAT'
"""
Unscheduled for all
"""
options.runUnscheduled=True
self._checkRepackedFlag(options, **args)
if 'customs' in args:
options.customisation_file=args['customs']
eiStep=''
if self.addEI:
eiStep=',EI'
options.step = 'RAW2DIGI,L1Reco,RECO'+self.recoSeq+eiStep+step+PhysicsSkimStep+miniAODStep+',DQM'+dqmStep+',ENDJOB'
dictIO(options,args)
options.conditions = gtNameAndConnect(globalTag, args)
process = cms.Process('RECO', cms.ModifierChain(self.eras, self.promptModifiers) )
cb = ConfigBuilder(options, process = process, with_output = True)
# Input source
process.source = cms.Source("PoolSource",
fileNames = cms.untracked.vstring()
)
cb.prepare()
addMonitoring(process)
return process
def expressProcessing(self, globalTag, **args):
"""
_expressProcessing_
Proton collision data taking express processing
"""
skims = args['skims']
# the AlCaReco skims for PCL should only run during AlCaSkimming step which uses the same configuration on the Tier0 side, for this reason we drop them here
pclWkflws = [x for x in skims if "PromptCalibProd" in x]
for wfl in pclWkflws:
skims.remove(wfl)
step = stepALCAPRODUCER(skims)
dqmStep = dqmSeq(args, '')
options = Options()
options.__dict__.update(defaultOptions.__dict__)
options.scenario = self.cbSc
if ('nThreads' in args):
options.nThreads = args['nThreads']
eiStep = ''
if self.addEI:
eiStep = ',EI'
options.step = 'RAW2DIGI,L1Reco,RECO' + self.recoSeq + eiStep + step + ',DQM' + dqmStep + ',ENDJOB'
dictIO(options, args)
options.conditions = gtNameAndConnect(globalTag, args)
options.filein = 'tobeoverwritten.xyz'
if 'inputSource' in args:
options.filetype = args['inputSource']
process = cms.Process(
'RECO', cms.ModifierChain(self.eras, self.expressModifiers))
if 'customs' in args:
options.customisation_file = args['customs']
self._checkRepackedFlag(options, **args)
cb = ConfigBuilder(options,
process=process,
with_output=True,
with_input=True)
cb.prepare()
addMonitoring(process)
return process
def expressProcessing(self, globalTag, **args):
"""
_expressProcessing_
Proton collision data taking express processing
"""
skims = args['skims']
# the AlCaReco skims for PCL should only run during AlCaSkimming step which uses the same configuration on the Tier0 side, for this reason we drop them here
pclWkflws = [x for x in skims if "PromptCalibProd" in x]
for wfl in pclWkflws:
skims.remove(wfl)
step = stepALCAPRODUCER(skims)
dqmStep= dqmSeq(args,'')
options = Options()
options.__dict__.update(defaultOptions.__dict__)
options.scenario = self.cbSc
if ('nThreads' in args) :
options.nThreads=args['nThreads']
eiStep=''
if self.addEI:
eiStep=',EI'
options.step = 'RAW2DIGI,L1Reco,RECO'+self.recoSeq+eiStep+step+',DQM'+dqmStep+',ENDJOB'
dictIO(options,args)
options.conditions = gtNameAndConnect(globalTag, args)
options.filein = 'tobeoverwritten.xyz'
if 'inputSource' in args:
options.filetype = args['inputSource']
process = cms.Process('RECO', cms.ModifierChain(self.eras, self.expressModifiers) )
if 'customs' in args:
options.customisation_file=args['customs']
self._checkRepackedFlag(options,**args)
cb = ConfigBuilder(options, process = process, with_output = True, with_input = True)
cb.prepare()
addMonitoring(process)
return process
def promptReco(self, globalTag, **args):
"""
_promptReco_
Proton collision data taking prompt reco
"""
step = stepALCAPRODUCER(args['skims'])
dqmStep= dqmSeq(args,'')
options = Options()
options.__dict__.update(defaultOptions.__dict__)
options.scenario = self.cbSc
miniAODStep=''
# if miniAOD is asked for - then retrieve the miniaod config
if 'outputs' in args:
for a in args['outputs']:
if a['dataTier'] == 'MINIAOD':
miniAODStep=',PAT'
options.runUnscheduled=True
if 'customs' in args:
options.customisation_file=args['customs']
options.step = 'RAW2DIGI,L1Reco,RECO'+self.recoSeq+step+miniAODStep+',DQM'+dqmStep+',ENDJOB'
dictIO(options,args)
options.conditions = gtNameAndConnect(globalTag, args)
process = cms.Process('RECO')
cb = ConfigBuilder(options, process = process, with_output = True)
# Input source
process.source = cms.Source("PoolSource",
fileNames = cms.untracked.vstring()
)
cb.prepare()
addMonitoring(process)
return process
def dqmHarvesting(self, datasetName, runNumber, globalTag, **args):
"""
_dqmHarvesting_
Proton collisions data taking DQM Harvesting
"""
options = defaultOptions
options.scenario = self.cbSc
options.step = "HARVESTING" + dqmSeq(args, ':dqmHarvesting')
options.name = "EDMtoMEConvert"
options.conditions = globalTag
process = cms.Process("HARVESTING")
process.source = dqmIOSource(args)
configBuilder = ConfigBuilder(options, process=process)
configBuilder.prepare()
harvestingMode(process, datasetName, args, rANDl=False)
return process
def dqmHarvesting(self, datasetName, runNumber, globalTag, **args):
"""
_dqmHarvesting_
Proton collisions data taking DQM Harvesting
"""
options = defaultOptions
options.scenario = 'pp'
options.step = "HARVESTING"+dqmSeq(args,':DQMOffline')
options.name = "EDMtoMEConvert"
options.conditions = gtNameAndConnect(globalTag, args)
process = cms.Process("HARVESTING", self.eras)
process.source = dqmIOSource(args)
configBuilder = ConfigBuilder(options, process = process)
configBuilder.prepare()
harvestingMode(process,datasetName,args,rANDl=False)
return process
def dqmHarvesting(self, datasetName, runNumber, globalTag, **args):
"""
_dqmHarvesting_
Proton collisions data taking DQM Harvesting
"""
options = defaultOptions
options.scenario = self.cbSc
options.step = "HARVESTING" + dqmSeq(args, ":dqmHarvesting")
options.name = "EDMtoMEConvert"
options.conditions = globalTag
process = cms.Process("HARVESTING")
process.source = dqmIOSource(args)
configBuilder = ConfigBuilder(options, process=process)
configBuilder.prepare()
harvestingMode(process, datasetName, args, rANDl=True)
return process
def dqmHarvesting(self, datasetName, runNumber, globalTag, **args):
"""
_dqmHarvesting_
Proton collisions data taking DQM Harvesting
"""
options = defaultOptions
options.scenario = self.cbSc
options.step = "HARVESTING"+dqmSeq(args,':dqmHarvesting')
options.name = "EDMtoMEConvert"
options.conditions = gtNameAndConnect(globalTag, args)
process = cms.Process("HARVESTING")
process.source = dqmIOSource(args)
if 'customs' in args:
options.customisation_file=args['customs']
configBuilder = ConfigBuilder(options, process = process)
configBuilder.prepare()
harvestingMode(process,datasetName,args,rANDl=False)
return process
