def __init__(self, name, params):
MooseObject.__init__(self, name, params)
self.specs = params
# Initialize the status bucket class
self.status = util.TestStatus()
# Enumerate the buckets here so ther are easier to work with in the tester class
self.bucket_success = self.status.bucket_success
self.bucket_fail = self.status.bucket_fail
self.bucket_diff = self.status.bucket_diff
self.bucket_pbs = self.status.bucket_pbs
self.bucket_pending = self.status.bucket_pending
self.bucket_deleted = self.status.bucket_deleted
self.bucket_skip = self.status.bucket_skip
self.bucket_silent = self.status.bucket_silent
# Initialize the tester with a pending status
self.setStatus('launched', self.bucket_pending)
# Set the status message
if self.specs['check_input']:
self.success_message = 'SYNTAX PASS'
else:
self.success_message = self.specs['success_message']
# Set up common paramaters
self.should_execute = self.specs['should_execute']
self.check_input = self.specs['check_input']
def __init__(self, name, params):
MooseObject.__init__(self, name, params)
self.specs = params
# Initialize the status bucket class
self.status = util.TestStatus()
# Enumerate the buckets here so ther are easier to work with in the tester class
self.bucket_success = self.status.bucket_success
self.bucket_fail = self.status.bucket_fail
self.bucket_diff = self.status.bucket_diff
self.bucket_pbs = self.status.bucket_pbs
self.bucket_pending = self.status.bucket_pending
self.bucket_deleted = self.status.bucket_deleted
self.bucket_skip = self.status.bucket_skip
self.bucket_silent = self.status.bucket_silent
# Initialize the tester with a pending status
self.setStatus('launched', self.bucket_pending)
# Set the status message
if self.specs['check_input']:
self.success_message = 'SYNTAX PASS'
else:
self.success_message = self.specs['success_message']
# Set up common paramaters
self.should_execute = self.specs['should_execute']
self.check_input = self.specs['check_input']
def __init__(self, name, params):
MooseObject.__init__(self, name, params)
self.specs = params
# Bool if test can run
self._runnable = None
# Initialize the status bucket class
self.status = util.TestStatus()
# Enumerate the buckets here so ther are easier to work with in the tester class
self.bucket_initialized = self.status.bucket_initialized
self.bucket_success = self.status.bucket_success
self.bucket_fail = self.status.bucket_fail
self.bucket_diff = self.status.bucket_diff
self.bucket_pending = self.status.bucket_pending
self.bucket_finished = self.status.bucket_finished
self.bucket_deleted = self.status.bucket_deleted
self.bucket_skip = self.status.bucket_skip
self.bucket_silent = self.status.bucket_silent
# Set the status message
if self.specs['check_input']:
self.success_message = 'SYNTAX PASS'
else:
self.success_message = self.specs['success_message']
# Set up common paramaters
self.should_execute = self.specs['should_execute']
self.check_input = self.specs['check_input']
if self.specs["allow_test_objects"]:
self.specs["cli_args"].append("--allow-test-objects")
def __init__(self, name, params):
MooseObject.__init__(self, name, params)
self.specs = params
# mesh_mode has a few deprecated options
# TODO: We need to print out a deprecated warning in the future
mesh_mode = self.specs['mesh_mode']
replacement_list = []
for i, item in enumerate(mesh_mode):
if item.upper() == 'PARALLEL':
mesh_mode[i] = 'DISTRIBUTED'
if item.upper() == 'SERIAL':
mesh_mode[i] = 'REPLICATED'
def __init__(self, name, params):
MooseObject.__init__(self, name, params)
self.specs = params
# mesh_mode has a few deprecated options
# TODO: We need to print out a deprecated warning in the future
mesh_mode = self.specs['mesh_mode']
replacement_list = []
for i, item in enumerate(mesh_mode):
if item.upper() == 'PARALLEL':
mesh_mode[i] = 'DISTRIBUTED'
if item.upper() == 'SERIAL':
mesh_mode[i] = 'REPLICATED'
def __init__(self, harness, params):
MooseObject.__init__(self, harness, params)
## The test harness to run callbacks on
self.harness = harness
# Retrieve and store the TestHarness options for use in this object
self.options = harness.getOptions()
# The Scheduler class can be initialized with no "max_processes" argument and it'll default
# to a soft limit. If however a max_processes is passed we'll treat it as a hard limit.
# The difference is whether or not we allow single jobs to exceed the number of slots.
if params['max_processes'] == None:
self.available_slots = 1
self.soft_limit = True
else:
self.available_slots = params['max_processes'] # hard limit
self.soft_limit = False
# Requested average load level to stay below
self.average_load = params['average_load']
# The time the status queue reported no activity to the TestHarness
self.last_reported = clock()
# A set containing jobs that have been reported
self.jobs_reported = set([])
# Initialize run_pool based on available slots
self.run_pool = ThreadPool(processes=self.available_slots)
# Initialize status_pool to only use 1 process (to prevent status messages from getting clobbered)
self.status_pool = ThreadPool(processes=1)
# Slot Lock when processing resource allocations
self.slot_lock = threading.Lock()
# DAG Lock when processing the DAG
self.dag_lock = threading.Lock()
# Workers in use (single job might request multiple slots)
self.slots_in_use = 0
# Jobs waiting to finish (includes actively running jobs)
self.job_queue_count = 0
# Set containing our TesterData containers. We use this in the event of a KeyboardInterrupt to
# iterate over and kill any subprocesses
self.tester_datas = set([])
def validParams():
params = MooseObject.validParams()
# Common Options
params.addRequiredParam('type', "The type of test of Tester to create for this test.")
params.addParam('max_time', 300, "The maximum in seconds that the test will be allowed to run.")
params.addParam('min_reported_time', "The minimum time elapsed before a test is reported as taking to long to run.")
params.addParam('skip', "Provide a reason this test will be skipped.")
params.addParam('deleted', "Tests that only show up when using the '-e' option (Permanently skipped or not implemented).")
params.addParam('heavy', False, "Set to True if this test should only be run when the '--heavy' option is used.")
params.addParam('group', [], "A list of groups for which this test belongs.")
params.addParam('prereq', [], "A list of prereq tests that need to run successfully before launching this test.")
params.addParam('skip_checks', False, "Tells the TestHarness to skip additional checks (This parameter is set automatically by the TestHarness during recovery tests)")
params.addParam('scale_refine', 0, "The number of refinements to do when scaling")
params.addParam('cli_args', [], "Additional arguments to be passed to the test.")
params.addParam('valgrind', 'NONE', "Set to (NONE, NORMAL, HEAVY) to determine which configurations where valgrind will run.")
# Test Filters
params.addParam('platform', ['ALL'], "A list of platforms for which this test will run on. ('ALL', 'DARWIN', 'LINUX', 'SL', 'LION', 'ML')")
params.addParam('compiler', ['ALL'], "A list of compilers for which this test is valid on. ('ALL', 'GCC', 'INTEL', 'CLANG')")
params.addParam('petsc_version', ['ALL'], "A list of petsc versions for which this test will run on, supports normal comparison operators ('<', '>', etc...)")
params.addParam('mesh_mode', ['ALL'], "A list of mesh modes for which this test will run ('PARALLEL', 'SERIAL')")
params.addParam('method', ['ALL'], "A test that runs under certain executable configurations ('ALL', 'OPT', 'DBG', 'DEVEL', 'OPROF', 'PRO')")
params.addParam('library_mode', ['ALL'], "A test that only runs when libraries are built under certain configurations ('ALL', 'STATIC', 'DYNAMIC')")
params.addParam('dtk', ['ALL'], "A test that runs only if DTK is detected ('ALL', 'TRUE', 'FALSE')")
params.addParam('unique_ids', ['ALL'], "A test that runs only if UNIQUE_IDs are enabled ('ALL', 'TRUE', 'FALSE')")
params.addParam('recover', True, "A test that runs with '--recover' mode enabled")
params.addParam('vtk', ['ALL'], "A test that runs only if VTK is detected ('ALL', 'TRUE', 'FALSE')")
params.addParam('tecplot', ['ALL'], "A test that runs only if Tecplot is detected ('ALL', 'TRUE', 'FALSE')")
return params
def validParams():
params = MooseObject.validParams()
# Common Options
params.addRequiredParam('type', "The type of test of Tester to create for this test.")
params.addParam('max_time', 300, "The maximum in seconds that the test will be allowed to run.")
params.addParam('min_reported_time', "The minimum time elapsed before a test is reported as taking to long to run.")
params.addParam('skip', "Provide a reason this test will be skipped.")
params.addParam('deleted', "Tests that only show up when using the '-e' option (Permanently skipped or not implemented).")
params.addParam('heavy', False, "Set to True if this test should only be run when the '--heavy' option is used.")
params.addParam('group', [], "A list of groups for which this test belongs.")
params.addParam('prereq', [], "A list of prereq tests that need to run successfully before launching this test.")
params.addParam('skip_checks', False, "Tells the TestHarness to skip additional checks (This parameter is set automatically by the TestHarness during recovery tests)")
params.addParam('scale_refine', 0, "The number of refinements to do when scaling")
params.addParam('success_message', 'OK', "The successful message")
params.addParam('cli_args', [], "Additional arguments to be passed to the test.")
params.addParam('valgrind', 'NONE', "Set to (NONE, NORMAL, HEAVY) to determine which configurations where valgrind will run.")
# Test Filters
params.addParam('platform', ['ALL'], "A list of platforms for which this test will run on. ('ALL', 'DARWIN', 'LINUX', 'SL', 'LION', 'ML')")
params.addParam('compiler', ['ALL'], "A list of compilers for which this test is valid on. ('ALL', 'GCC', 'INTEL', 'CLANG')")
params.addParam('petsc_version', ['ALL'], "A list of petsc versions for which this test will run on, supports normal comparison operators ('<', '>', etc...)")
params.addParam('mesh_mode', ['ALL'], "A list of mesh modes for which this test will run ('DISTRIBUTED', 'REPLICATED')")
params.addParam('method', ['ALL'], "A test that runs under certain executable configurations ('ALL', 'OPT', 'DBG', 'DEVEL', 'OPROF', 'PRO')")
params.addParam('library_mode', ['ALL'], "A test that only runs when libraries are built under certain configurations ('ALL', 'STATIC', 'DYNAMIC')")
params.addParam('dtk', ['ALL'], "A test that runs only if DTK is detected ('ALL', 'TRUE', 'FALSE')")
params.addParam('unique_ids', ['ALL'], "A test that runs only if UNIQUE_IDs are enabled ('ALL', 'TRUE', 'FALSE')")
params.addParam('recover', True, "A test that runs with '--recover' mode enabled")
params.addParam('vtk', ['ALL'], "A test that runs only if VTK is detected ('ALL', 'TRUE', 'FALSE')")
params.addParam('tecplot', ['ALL'], "A test that runs only if Tecplot is detected ('ALL', 'TRUE', 'FALSE')")
params.addParam('dof_id_bytes', ['ALL'], "A test that runs only if libmesh is configured --with-dof-id-bytes = a specific number, e.g. '4', '8'")
params.addParam('petsc_debug', ['ALL'], "{False,True} -> test only runs when PETSc is configured with --with-debugging={0,1}, otherwise test always runs.")
params.addParam('curl', ['ALL'], "A test that runs only if CURL is detected ('ALL', 'TRUE', 'FALSE')")
params.addParam('tbb', ['ALL'], "A test that runs only if TBB is available ('ALL', 'TRUE', 'FALSE')")
params.addParam('superlu', ['ALL'], "A test that runs only if SuperLU is available via PETSc ('ALL', 'TRUE', 'FALSE')")
params.addParam('slepc', ['ALL'], "A test that runs only if SLEPc is available ('ALL', 'TRUE', 'FALSE')")
params.addParam('unique_id', ['ALL'], "A test that runs only if libmesh is configured with --enable-unique-id ('ALL', 'TRUE', 'FALSE')")
params.addParam('cxx11', ['ALL'], "A test that runs only if CXX11 is available ('ALL', 'TRUE', 'FALSE')")
params.addParam('asio', ['ALL'], "A test that runs only if ASIO is available ('ALL', 'TRUE', 'FALSE')")
params.addParam('depend_files', [], "A test that only runs if all depend files exist (files listed are expected to be relative to the base directory, not the test directory")
params.addParam('env_vars', [], "A test that only runs if all the environment variables listed exist")
params.addParam('should_execute', True, 'Whether or not the executable needs to be run. Use this to chain together multiple tests based off of one executeable invocation')
params.addParam('required_submodule', [], "A list of initialized submodules for which this test requires.")
params.addParam('check_input', False, "Check for correct input file syntax")
params.addParam('display_required', False, "The test requires and active display for rendering (i.e., ImageDiff tests).")
return params
def validParams():
params = MooseObject.validParams()
# Common Options
params.addRequiredParam('type', "The type of test of Tester to create for this test.")
params.addParam('max_time', 300, "The maximum in seconds that the test will be allowed to run.")
params.addParam('min_reported_time', "The minimum time elapsed before a test is reported as taking to long to run.")
params.addParam('skip', "Provide a reason this test will be skipped.")
params.addParam('deleted', "Tests that only show up when using the '-e' option (Permanently skipped or not implemented).")
params.addParam('heavy', False, "Set to True if this test should only be run when the '--heavy' option is used.")
params.addParam('group', [], "A list of groups for which this test belongs.")
params.addParam('prereq', [], "A list of prereq tests that need to run successfully before launching this test.")
params.addParam('skip_checks', False, "Tells the TestHarness to skip additional checks (This parameter is set automatically by the TestHarness during recovery tests)")
params.addParam('scale_refine', 0, "The number of refinements to do when scaling")
params.addParam('cli_args', [], "Additional arguments to be passed to the test.")
params.addParam('valgrind', 'NONE', "Set to (NONE, NORMAL, HEAVY) to determine which configurations where valgrind will run.")
# Test Filters
params.addParam('platform', ['ALL'], "A list of platforms for which this test will run on. ('ALL', 'DARWIN', 'LINUX', 'SL', 'LION', 'ML')")
params.addParam('compiler', ['ALL'], "A list of compilers for which this test is valid on. ('ALL', 'GCC', 'INTEL', 'CLANG')")
params.addParam('petsc_version', ['ALL'], "A list of petsc versions for which this test will run on, supports normal comparison operators ('<', '>', etc...)")
params.addParam('mesh_mode', ['ALL'], "A list of mesh modes for which this test will run ('PARALLEL', 'SERIAL')")
params.addParam('method', ['ALL'], "A test that runs under certain executable configurations ('ALL', 'OPT', 'DBG', 'DEVEL', 'OPROF', 'PRO')")
params.addParam('library_mode', ['ALL'], "A test that only runs when libraries are built under certain configurations ('ALL', 'STATIC', 'DYNAMIC')")
params.addParam('dtk', ['ALL'], "A test that runs only if DTK is detected ('ALL', 'TRUE', 'FALSE')")
params.addParam('unique_ids', ['ALL'], "A test that runs only if UNIQUE_IDs are enabled ('ALL', 'TRUE', 'FALSE')")
params.addParam('recover', True, "A test that runs with '--recover' mode enabled")
params.addParam('vtk', ['ALL'], "A test that runs only if VTK is detected ('ALL', 'TRUE', 'FALSE')")
params.addParam('tecplot', ['ALL'], "A test that runs only if Tecplot is detected ('ALL', 'TRUE', 'FALSE')")
params.addParam('dof_id_bytes', ['ALL'], "A test that runs only if libmesh is configured --with-dof-id-bytes = a specific number, e.g. '4', '8'")
params.addParam('petsc_debug', ['ALL'], "{False,True} -> test only runs when PETSc is configured with --with-debugging={0,1}, otherwise test always runs.")
params.addParam('curl', ['ALL'], "A test that runs only if CURL is detected ('ALL', 'TRUE', 'FALSE')")
params.addParam('tbb', ['ALL'], "A test that runs only if TBB is available ('ALL', 'TRUE', 'FALSE')")
params.addParam('superlu', ['ALL'], "A test that runs only if SuperLU is available via PETSc ('ALL', 'TRUE', 'FALSE')")
params.addParam('unique_id', ['ALL'], "A test that runs only if libmesh is configured with --enable-unique-id ('ALL', 'TRUE', 'FALSE')")
params.addParam('cxx11', ['ALL'], "A test that runs only if CXX11 is available ('ALL', 'TRUE', 'FALSE')")
params.addParam('asio', ['ALL'], "A test that runs only if ASIO is available ('ALL', 'TRUE', 'FALSE')")
params.addParam('depend_files', [], "A test that only runs if all depend files exist (files listed are expected to be relative to the base directory, not the test directory")
params.addParam('env_vars', [], "A test that only runs if all the environment variables listed exist")
return params
def __init__(self, name, params): MooseObject.__init__(self, name, params) self.specs = params
def __init__(self, name, params):
MooseObject.__init__(self, name, params)
self.specs = params
def validParams():
params = MooseObject.validParams()
# Common Options
params.addRequiredParam(
'type', "The type of test of Tester to create for this test.")
params.addParam(
'max_time', 300,
"The maximum in seconds that the test will be allowed to run.")
params.addParam(
'min_reported_time',
"The minimum time elapsed before a test is reported as taking to long to run."
)
params.addParam('skip', "Provide a reason this test will be skipped.")
params.addParam(
'deleted',
"Tests that only show up when using the '-e' option (Permanently skipped or not implemented)."
)
params.addParam(
'heavy', False,
"Set to True if this test should only be run when the '--heavy' option is used."
)
params.addParam('group', [],
"A list of groups for which this test belongs.")
params.addParam(
'prereq', [],
"A list of prereq tests that need to run successfully before launching this test."
)
params.addParam(
'skip_checks', False,
"Tells the TestHarness to skip additional checks (This parameter is set automatically by the TestHarness during recovery tests)"
)
# Test Filters
params.addParam(
'platform', ['ALL'],
"A list of platforms for which this test will run on. ('ALL', 'DARWIN', 'LINUX', 'SL', 'LION', 'ML')"
)
params.addParam(
'compiler', ['ALL'],
"A list of compilers for which this test is valid on. ('ALL', 'GCC', 'INTEL', 'CLANG')"
)
params.addParam(
'petsc_version', ['ALL'],
"A list of petsc versions for which this test will run on, supports normal comparison operators ('<', '>', etc...)"
)
params.addParam(
'mesh_mode', ['ALL'],
"A list of mesh modes for which this test will run ('PARALLEL', 'SERIAL')"
)
params.addParam(
'method', ['ALL'],
"A test that runs under certain executable configurations ('ALL', 'OPT', 'DBG', 'DEVEL', 'OPROF', 'PRO')"
)
params.addParam(
'library_mode', ['ALL'],
"A test that only runs when libraries are built under certain configurations ('ALL', 'STATIC', 'DYNAMIC')"
)
params.addParam(
'dtk', ['ALL'],
"A test that runs only if DTK is detected ('ALL', 'TRUE', 'FALSE')"
)
params.addParam(
'unique_ids', ['ALL'],
"A test that runs only if UNIQUE_IDs are enabled ('ALL', 'TRUE', 'FALSE')"
)
params.addParam('recover', True,
"A test that runs with '--recover' mode enabled")
params.addParam(
'vtk', ['ALL'],
"A test that runs only if VTK is detected ('ALL', 'TRUE', 'FALSE')"
)
params.addParam(
'tecplot', ['ALL'],
"A test that runs only if Tecplot is detected ('ALL', 'TRUE', 'FALSE')"
)
return params
def validParams():
params = MooseObject.validParams()
params.addRequiredParam('average_load', 64.0, "Average load to allow")
params.addRequiredParam('max_processes', None, "Hard limit of maxium processes to use")
return params
