def __init__(self, methodName):
"""Run once on class initialization."""
unittest.TestCase.__init__(self, methodName)
# create composition
self.mMapRenderer = QgsMapRenderer()
self.mComposition = QgsComposition(self.mMapRenderer)
self.mComposition.setPaperSize(297, 210)
self.mComposerRect1 = QgsComposerShape(20, 20, 150, 100, self.mComposition)
self.mComposerRect1.setShapeType(QgsComposerShape.Rectangle)
self.mComposerRect1.setBackgroundColor(QColor.fromRgb(255, 150, 0))
self.mComposition.addComposerShape(self.mComposerRect1)
self.mComposerRect2 = QgsComposerShape(50, 50, 150, 100, self.mComposition)
self.mComposerRect2.setShapeType(QgsComposerShape.Rectangle)
self.mComposerRect2.setBackgroundColor(QColor.fromRgb(0, 100, 150))
self.mComposition.addComposerShape(self.mComposerRect2)
def __init__(self, methodName):
"""Run once on class initialization."""
unittest.TestCase.__init__(self, methodName)
self.mapSettings = QgsMapSettings()
# create composition
self.mComposition = QgsComposition(self.mapSettings)
self.mComposition.setPaperSize(297, 210)
self.mComposerShape = QgsComposerShape(20, 20, 150, 100, self.mComposition)
self.mComposerShape.setBackgroundColor(QColor.fromRgb(255, 150, 0))
self.mComposition.addComposerShape(self.mComposerShape)
def __init__(self, parent=None):
super(ShellScintilla, self).__init__(parent)
code.InteractiveInterpreter.__init__(self, locals=None)
self.parent = parent
self.opening = ['(', '{', '[', "'", '"']
self.closing = [')', '}', ']', "'", '"']
self.settings = QSettings()
# Enable non-ascii chars for editor
self.setUtf8(True)
self.new_input_line = True
self.setMarginWidth(0, 0)
self.setMarginWidth(1, 0)
self.setMarginWidth(2, 0)
self.buffer = []
self.displayPrompt(False)
for line in _init_commands:
self.runsource(line)
self.history = []
self.historyIndex = 0
# Read history command file
self.readHistoryFile()
self.historyDlg = HistoryDialog(self)
# Brace matching: enable for a brace immediately before or after
# the current position
self.setBraceMatching(QsciScintilla.SloppyBraceMatch)
self.setMatchedBraceBackgroundColor(QColor("#b7f907"))
# Current line visible with special background color
self.setCaretWidth(2)
self.refreshSettingsShell()
# Don't want to see the horizontal scrollbar at all
# Use raw message to Scintilla here (all messages are documented
# here: http://www.scintilla.org/ScintillaDoc.html)
self.SendScintilla(QsciScintilla.SCI_SETHSCROLLBAR, 0)
# not too small
#self.setMinimumSize(500, 300)
self.setWrapMode(QsciScintilla.WrapCharacter)
self.SendScintilla(QsciScintilla.SCI_EMPTYUNDOBUFFER)
## Disable command key
ctrl, shift = self.SCMOD_CTRL << 16, self.SCMOD_SHIFT << 16
self.SendScintilla(QsciScintilla.SCI_CLEARCMDKEY, ord('L') + ctrl)
self.SendScintilla(QsciScintilla.SCI_CLEARCMDKEY, ord('T') + ctrl)
self.SendScintilla(QsciScintilla.SCI_CLEARCMDKEY, ord('D') + ctrl)
self.SendScintilla(QsciScintilla.SCI_CLEARCMDKEY, ord('Z') + ctrl)
self.SendScintilla(QsciScintilla.SCI_CLEARCMDKEY, ord('Y') + ctrl)
self.SendScintilla(QsciScintilla.SCI_CLEARCMDKEY, ord('L') + ctrl + shift)
## New QShortcut = ctrl+space/ctrl+alt+space for Autocomplete
self.newShortcutCSS = QShortcut(QKeySequence(Qt.CTRL + Qt.SHIFT + Qt.Key_Space), self)
self.newShortcutCAS = QShortcut(QKeySequence(Qt.CTRL + Qt.ALT + Qt.Key_Space), self)
self.newShortcutCSS.setContext(Qt.WidgetShortcut)
self.newShortcutCAS.setContext(Qt.WidgetShortcut)
self.newShortcutCAS.activated.connect(self.autoCompleteKeyBinding)
self.newShortcutCSS.activated.connect(self.showHistory)
def setLexers(self):
self.lexer = QsciLexerPython()
loadFont = self.settings.value("pythonConsole/fontfamilytext", "Monospace")
fontSize = self.settings.value("pythonConsole/fontsize", 10, type=int)
font = QFont(loadFont)
font.setFixedPitch(True)
font.setPointSize(fontSize)
font.setStyleHint(QFont.TypeWriter)
font.setStretch(QFont.SemiCondensed)
font.setLetterSpacing(QFont.PercentageSpacing, 87.0)
font.setBold(False)
self.lexer.setDefaultFont(font)
self.lexer.setDefaultColor(QColor(self.settings.value("pythonConsole/defaultFontColor", QColor(Qt.black))))
self.lexer.setColor(QColor(self.settings.value("pythonConsole/commentFontColor", QColor(Qt.gray))), 1)
self.lexer.setColor(QColor(self.settings.value("pythonConsole/keywordFontColor", QColor(Qt.darkGreen))), 5)
self.lexer.setColor(QColor(self.settings.value("pythonConsole/classFontColor", QColor(Qt.blue))), 8)
self.lexer.setColor(QColor(self.settings.value("pythonConsole/methodFontColor", QColor(Qt.darkGray))), 9)
self.lexer.setColor(QColor(self.settings.value("pythonConsole/decorFontColor", QColor(Qt.darkBlue))), 15)
self.lexer.setColor(QColor(self.settings.value("pythonConsole/commentBlockFontColor", QColor(Qt.gray))), 12)
self.lexer.setColor(QColor(self.settings.value("pythonConsole/singleQuoteFontColor", QColor(Qt.blue))), 4)
self.lexer.setColor(QColor(self.settings.value("pythonConsole/doubleQuoteFontColor", QColor(Qt.blue))), 3)
self.lexer.setColor(QColor(self.settings.value("pythonConsole/tripleSingleQuoteFontColor", QColor(Qt.blue))), 6)
self.lexer.setColor(QColor(self.settings.value("pythonConsole/tripleDoubleQuoteFontColor", QColor(Qt.blue))), 7)
self.lexer.setFont(font, 1)
self.lexer.setFont(font, 3)
self.lexer.setFont(font, 4)
for style in range(0, 33):
paperColor = QColor(self.settings.value("pythonConsole/paperBackgroundColor", QColor(Qt.white)))
self.lexer.setPaper(paperColor, style)
self.api = QsciAPIs(self.lexer)
chekBoxAPI = self.settings.value("pythonConsole/preloadAPI", True, type=bool)
chekBoxPreparedAPI = self.settings.value("pythonConsole/usePreparedAPIFile", False, type=bool)
if chekBoxAPI:
pap = os.path.join(QgsApplication.pkgDataPath(), "python", "qsci_apis", "pyqgis.pap")
self.api.loadPrepared(pap)
elif chekBoxPreparedAPI:
self.api.loadPrepared(self.settings.value("pythonConsole/preparedAPIFile"))
else:
apiPath = self.settings.value("pythonConsole/userAPI", [])
for i in range(0, len(apiPath)):
self.api.load(unicode(apiPath[i]))
self.api.prepare()
self.lexer.setAPIs(self.api)
self.setLexer(self.lexer)
def createColorRamp():
return QgsVectorGradientColorRampV2(QColor(255, 0, 0), QColor(0, 0, 255))
def testQgsGraduatedSymbolRendererV2_2(self):
"""Test QgsGraduatedSymbolRendererV2: Adding /removing/editing classes """
# Create a renderer
renderer = QgsGraduatedSymbolRendererV2()
symbol = createMarkerSymbol()
renderer.setSourceSymbol(symbol.clone())
symbol.setColor(QColor(255, 0, 0))
# Add class without start and end ranges
renderer.addClass(symbol.clone())
renderer.addClass(symbol.clone())
renderer.updateRangeLabel(1, 'Second range')
renderer.updateRangeLowerValue(1, 10.0)
renderer.updateRangeUpperValue(1, 25.0)
renderer.updateRangeRenderState(1, False)
symbol.setColor(QColor(0, 0, 255))
renderer.updateRangeSymbol(1, symbol.clone())
# Add as a rangeobject
symbol.setColor(QColor(0, 255, 0))
range = QgsRendererRangeV2(20.0, 25.5, symbol.clone(), 'Third range',
False)
renderer.addClassRange(range)
# Add class by lower and upper
renderer.addClassLowerUpper(25.5, 30.5)
# (Update label for sorting tests)
renderer.updateRangeLabel(3, 'Another range')
self.assertEqual(
dumpRangeLabels(renderer.ranges()),
'(0.0 - 0.0,Second range,Third range,Another range,)',
'Added ranges labels not correct')
self.assertEqual(
dumpRangeBreaks(renderer.ranges()),
'(0.0000-0.0000,10.0000-25.0000,20.0000-25.5000,25.5000-30.5000,)',
'Added ranges lower/upper values not correct')
# Check that clone function works
renderer2 = renderer.clone()
self.assertEqual(dumpGraduatedRenderer(renderer),
dumpGraduatedRenderer(renderer2),
"clone function doesn't replicate renderer properly")
# Check save and reload from Dom works
doc = QDomDocument()
element = renderer.save(doc)
renderer2 = QgsGraduatedSymbolRendererV2.create(element)
self.assertEqual(
dumpGraduatedRenderer(renderer), dumpGraduatedRenderer(renderer2),
"Save/create from DOM doesn't replicate renderer properly")
# Check sorting
renderer.sortByLabel()
self.assertEqual(
dumpRangeList(renderer.ranges(), labelsOnly=True),
'(0.0 - 0.0,Another range,Second range,Third range,)',
'sortByLabel not correct')
renderer.sortByValue()
self.assertEqual(
dumpRangeBreaks(renderer.ranges()),
'(0.0000-0.0000,10.0000-25.0000,20.0000-25.5000,25.5000-30.5000,)',
'sortByValue not correct')
renderer.sortByValue(Qt.DescendingOrder)
self.assertEqual(
dumpRangeBreaks(renderer.ranges()),
'(25.5000-30.5000,20.0000-25.5000,10.0000-25.0000,0.0000-0.0000,)',
'sortByValue descending not correct')
# Check deleting
renderer.deleteClass(2)
self.assertEqual(dumpRangeBreaks(renderer.ranges()),
'(25.5000-30.5000,20.0000-25.5000,0.0000-0.0000,)',
'deleteClass not correct')
renderer.deleteAllClasses()
self.assertEqual(len(renderer.ranges()), 0,
"deleteAllClasses didn't delete all")
def testQgsVectorColorBrewerColorRampV2(self):
# test color brewer color ramps
r = QgsVectorColorBrewerColorRampV2('OrRd', 6)
self.assertEqual(r.type(), 'colorbrewer')
self.assertEqual(r.schemeName(), 'OrRd')
self.assertEqual(r.count(), 6)
self.assertEqual(r.value(0), 0)
self.assertEqual(r.value(1), 0.2)
self.assertEqual(r.value(2), 0.4)
self.assertEqual(r.value(3), 0.6)
self.assertEqual(r.value(4), 0.8)
self.assertEqual(r.value(5), 1)
self.assertTrue(not r.color(-1).isValid())
self.assertTrue(not r.color(6).isValid())
self.assertEqual(r.color(0), QColor(254, 240, 217))
self.assertEqual(r.color(0.2), QColor(253, 212, 158))
self.assertEqual(r.color(0.4), QColor(253, 187, 132))
self.assertEqual(r.color(0.6), QColor(252, 141, 89))
self.assertEqual(r.color(0.8), QColor(227, 74, 51))
self.assertEqual(r.color(1.0), QColor(179, 0, 0))
# try using an invalid scheme name
bad = QgsVectorColorBrewerColorRampV2('badscheme', 6)
self.assertFalse(bad.color(0).isValid())
self.assertEqual(bad.value(1), 0)
# test creating from properties
props = r.properties()
fromProps = QgsVectorColorBrewerColorRampV2.create(props)
self.assertEqual(fromProps.type(), 'colorbrewer')
self.assertEqual(fromProps.schemeName(), 'OrRd')
self.assertEqual(fromProps.count(), 6)
self.assertEqual(fromProps.color(0), QColor(254, 240, 217))
self.assertEqual(fromProps.color(0.2), QColor(253, 212, 158))
self.assertEqual(fromProps.color(0.4), QColor(253, 187, 132))
self.assertEqual(fromProps.color(0.6), QColor(252, 141, 89))
self.assertEqual(fromProps.color(0.8), QColor(227, 74, 51))
self.assertEqual(fromProps.color(1.0), QColor(179, 0, 0))
# test cloning ramp
cloned = r.clone()
self.assertEqual(cloned.type(), 'colorbrewer')
self.assertEqual(cloned.schemeName(), 'OrRd')
self.assertEqual(cloned.count(), 6)
self.assertEqual(cloned.color(0), QColor(254, 240, 217))
self.assertEqual(cloned.color(0.2), QColor(253, 212, 158))
self.assertEqual(cloned.color(0.4), QColor(253, 187, 132))
self.assertEqual(cloned.color(0.6), QColor(252, 141, 89))
self.assertEqual(cloned.color(0.8), QColor(227, 74, 51))
self.assertEqual(cloned.color(1.0), QColor(179, 0, 0))
# set scheme name
r.setSchemeName('Reds')
self.assertEqual(r.schemeName(), 'Reds')
self.assertEqual(r.count(), 6)
self.assertEqual(r.color(0), QColor(254, 229, 217))
self.assertEqual(r.color(0.2), QColor(252, 187, 161))
self.assertEqual(r.color(0.4), QColor(252, 146, 114))
self.assertEqual(r.color(0.6), QColor(251, 106, 74))
self.assertEqual(r.color(0.8), QColor(222, 45, 38))
self.assertEqual(r.color(1.0), QColor(165, 15, 21))
# set colors
r.setColors(3)
self.assertEqual(r.colors(), 3)
self.assertEqual(r.count(), 3)
self.assertEqual(r.color(0), QColor(254, 224, 210))
self.assertEqual(r.color(0.5), QColor(252, 146, 114))
self.assertEqual(r.color(1.0), QColor(222, 45, 38))
# test static members
names = QgsVectorColorBrewerColorRampV2.listSchemeNames()
self.assertTrue('Reds' in names and 'OrRd' in names)
self.assertEqual(
len(
QgsVectorColorBrewerColorRampV2.listSchemeVariants(
'bad scheme')), 0)
variants = QgsVectorColorBrewerColorRampV2.listSchemeVariants('Reds')
self.assertEqual(variants, [3, 4, 5, 6, 7, 8, 9])
def testQgsVectorGradientRampV2(self):
# test gradient with only start/end color
r = QgsVectorGradientColorRampV2(QColor(200, 0, 0, 100),
QColor(0, 200, 0, 200))
self.assertEqual(r.type(), 'gradient')
self.assertEqual(r.color1(), QColor(200, 0, 0, 100))
self.assertEqual(r.color2(), QColor(0, 200, 0, 200))
self.assertEqual(r.isDiscrete(), False)
self.assertEqual(len(r.stops()), 0)
self.assertEqual(r.count(), 2)
self.assertEqual(r.value(0), 0.0)
self.assertEqual(r.value(1), 1.0)
self.assertEqual(r.color(0), QColor(200, 0, 0, 100))
self.assertEqual(r.color(1), QColor(0, 200, 0, 200))
self.assertEqual(r.color(0.5), QColor(100, 100, 0, 150))
# test gradient with stops
r = QgsVectorGradientColorRampV2(QColor(200, 0, 0), QColor(
0, 200, 0), False, [
QgsGradientStop(0.1, QColor(180, 20, 40)),
QgsGradientStop(0.9, QColor(40, 60, 100))
])
self.assertEqual(r.color1(), QColor(200, 0, 0))
self.assertEqual(r.color2(), QColor(0, 200, 0))
self.assertEqual(r.isDiscrete(), False)
self.assertEqual(len(r.stops()), 2)
self.assertEqual(r.count(), 4)
self.assertEqual(r.value(0), 0.0)
self.assertEqual(r.value(1), 0.1)
self.assertEqual(r.value(2), 0.9)
self.assertEqual(r.value(3), 1.0)
self.assertEqual(r.color(0), QColor(200, 0, 0))
self.assertEqual(r.color(0.05), QColor(190, 10, 20))
self.assertEqual(r.color(0.1), QColor(180, 20, 40))
self.assertEqual(r.color(0.5), QColor(110, 40, 70))
self.assertEqual(r.color(0.9), QColor(40, 60, 100))
self.assertEqual(r.color(0.95), QColor(20, 130, 50))
self.assertEqual(r.color(1), QColor(0, 200, 0))
# test setters
r.setColor1(QColor(0, 0, 200))
self.assertEqual(r.color1(), QColor(0, 0, 200))
self.assertEqual(r.color(0), QColor(0, 0, 200))
r.setColor2(QColor(0, 0, 100))
self.assertEqual(r.color2(), QColor(0, 0, 100))
self.assertEqual(r.color(1.0), QColor(0, 0, 100))
r.setStops([QgsGradientStop(0.4, QColor(100, 100, 40))])
s = r.stops()
self.assertEqual(len(s), 1)
self.assertEqual(s[0].offset, 0.4)
self.assertEqual(s[0].color, QColor(100, 100, 40))
# test info
r.setInfo({'key1': 'val1', 'key2': 'val2'})
self.assertEqual(r.info()['key1'], 'val1')
self.assertEqual(r.info()['key2'], 'val2')
# test creating from properties
props = r.properties()
fromProps = QgsVectorGradientColorRampV2.create(props)
self.assertEqual(fromProps.color1(), QColor(0, 0, 200))
self.assertEqual(fromProps.color2(), QColor(0, 0, 100))
s = fromProps.stops()
self.assertEqual(len(s), 1)
self.assertEqual(s[0].offset, 0.4)
c = QColor(s[0].color)
self.assertEqual(c, QColor(100, 100, 40))
self.assertEqual(fromProps.info()['key1'], 'val1')
self.assertEqual(fromProps.info()['key2'], 'val2')
self.assertEqual(fromProps.isDiscrete(), False)
# test cloning ramp
cloned = r.clone()
self.assertEqual(cloned.color1(), QColor(0, 0, 200))
self.assertEqual(cloned.color2(), QColor(0, 0, 100))
s = cloned.stops()
self.assertEqual(len(s), 1)
self.assertEqual(s[0].offset, 0.4)
c = QColor(s[0].color)
self.assertEqual(c, QColor(100, 100, 40))
self.assertEqual(cloned.info()['key1'], 'val1')
self.assertEqual(cloned.info()['key2'], 'val2')
self.assertEqual(cloned.isDiscrete(), False)
# test discrete ramps
# first with no stops
d = QgsVectorGradientColorRampV2(QColor(200, 0, 0), QColor(0, 200, 0),
True)
self.assertEqual(d.isDiscrete(), True)
self.assertEqual(d.color(0), QColor(200, 0, 0))
self.assertEqual(d.color(0.5), QColor(200, 0, 0))
self.assertEqual(d.color(1), QColor(0, 200, 0))
# then with stops
d = QgsVectorGradientColorRampV2(QColor(200, 0, 0), QColor(
0, 200, 0), True, [
QgsGradientStop(0.1, QColor(180, 20, 40)),
QgsGradientStop(0.9, QColor(40, 60, 100))
])
self.assertEqual(d.isDiscrete(), True)
self.assertEqual(d.color(0), QColor(200, 0, 0))
self.assertEqual(d.color(0.05), QColor(200, 0, 0))
self.assertEqual(d.color(0.1), QColor(180, 20, 40))
self.assertEqual(d.color(0.5), QColor(180, 20, 40))
self.assertEqual(d.color(0.9), QColor(40, 60, 100))
self.assertEqual(d.color(0.95), QColor(40, 60, 100))
self.assertEqual(d.color(1), QColor(0, 200, 0))
# to gradient
g = QGradient()
r = QgsVectorGradientColorRampV2(QColor(200, 0, 0), QColor(
0, 200, 0), False, [
QgsGradientStop(0.1, QColor(180, 20, 40)),
QgsGradientStop(0.9, QColor(40, 60, 100))
])
r.addStopsToGradient(g, 0.5)
self.assertEqual(len(g.stops()), 4)
self.assertEqual(g.stops()[0], (0.0, QColor(200, 0, 0, 127)))
self.assertEqual(g.stops()[1], (0.1, QColor(180, 20, 40, 127)))
self.assertEqual(g.stops()[2], (0.9, QColor(40, 60, 100, 127)))
self.assertEqual(g.stops()[3], (1.0, QColor(0, 200, 0, 127)))
def accept(self):
self.settings.setValue("/Processing/dialogBase", self.saveGeometry())
checkCRS = ProcessingConfig.getSetting(ProcessingConfig.WARN_UNMATCHING_CRS)
try:
self.setParamValues()
if checkCRS and not self.alg.checkInputCRS():
reply = QMessageBox.question(self, self.tr("Unmatching CRS's"),
self.tr('Layers do not all use the same CRS. This can '
'cause unexpected results.\nDo you want to '
'continue?'),
QMessageBox.Yes | QMessageBox.No,
QMessageBox.No)
if reply == QMessageBox.No:
return
msg = self.alg._checkParameterValuesBeforeExecuting()
if msg:
QMessageBox.warning(
self, self.tr('Unable to execute algorithm'), msg)
return
self.btnRun.setEnabled(False)
self.btnClose.setEnabled(False)
buttons = self.mainWidget.iterateButtons
self.iterateParam = None
for i in range(len(buttons.values())):
button = buttons.values()[i]
if button.isChecked():
self.iterateParam = buttons.keys()[i]
break
self.progressBar.setMaximum(0)
self.lblProgress.setText(self.tr('Processing algorithm...'))
# Make sure the Log tab is visible before executing the algorithm
try:
self.tabWidget.setCurrentIndex(1)
self.repaint()
except:
pass
QApplication.setOverrideCursor(QCursor(Qt.WaitCursor))
self.setInfo(
self.tr('<b>Algorithm %s starting...</b>') % self.alg.name)
if self.iterateParam:
if runalgIterating(self.alg, self.iterateParam, self):
self.finish()
else:
QApplication.restoreOverrideCursor()
self.resetGUI()
else:
command = self.alg.getAsCommand()
if command:
ProcessingLog.addToLog(
ProcessingLog.LOG_ALGORITHM, command)
if runalg(self.alg, self):
self.finish()
else:
QApplication.restoreOverrideCursor()
self.resetGUI()
except AlgorithmDialogBase.InvalidParameterValue as e:
try:
self.buttonBox.accepted.connect(lambda:
e.widget.setPalette(QPalette()))
palette = e.widget.palette()
palette.setColor(QPalette.Base, QColor(255, 255, 0))
e.widget.setPalette(palette)
self.lblProgress.setText(
self.tr('<b>Missing parameter value: %s</b>') % e.parameter.description)
return
except:
QMessageBox.critical(self,
self.tr('Unable to execute algorithm'),
self.tr('Wrong or missing parameter values'))
def __init__(self, parent=None):
super(ShellOutputScintilla, self).__init__(parent)
self.parent = parent
self.shell = self.parent.shell
self.settings = QSettings()
# Creates layout for message bar
self.layout = QGridLayout(self)
self.layout.setContentsMargins(0, 0, 0, 0)
spacerItem = QSpacerItem(20, 40, QSizePolicy.Minimum,
QSizePolicy.Expanding)
self.layout.addItem(spacerItem, 1, 0, 1, 1)
# messageBar instance
self.infoBar = QgsMessageBar()
sizePolicy = QSizePolicy(QSizePolicy.Minimum, QSizePolicy.Fixed)
self.infoBar.setSizePolicy(sizePolicy)
self.layout.addWidget(self.infoBar, 0, 0, 1, 1)
# Enable non-ascii chars for editor
self.setUtf8(True)
sys.stdout = writeOut(self, sys.stdout)
sys.stderr = writeOut(self, sys.stderr, "_traceback")
self.insertInitText()
self.refreshSettingsOutput()
self.setReadOnly(True)
# Set the default font
font = QFont()
font.setFamily('Courier')
font.setFixedPitch(True)
font.setPointSize(10)
self.setFont(font)
self.setMarginsFont(font)
# Margin 0 is used for line numbers
self.setMarginWidth(0, 0)
self.setMarginWidth(1, 0)
self.setMarginWidth(2, 0)
#fm = QFontMetrics(font)
self.setMarginsFont(font)
self.setMarginWidth(1, "00000")
self.setMarginLineNumbers(1, True)
self.setMarginsForegroundColor(QColor("#3E3EE3"))
self.setMarginsBackgroundColor(QColor("#f9f9f9"))
self.setCaretLineVisible(True)
self.setCaretWidth(0)
self.setMinimumHeight(120)
self.setWrapMode(QsciScintilla.WrapCharacter)
self.SendScintilla(QsciScintilla.SCI_SETHSCROLLBAR, 0)
self.runScut = QShortcut(QKeySequence(Qt.CTRL + Qt.Key_E), self)
self.runScut.setContext(Qt.WidgetShortcut)
self.runScut.activated.connect(self.enteredSelected)
# Reimplemeted copy action to prevent paste prompt (>>>,...) in command view
self.copyShortcut = QShortcut(QKeySequence.Copy, self)
self.copyShortcut.activated.connect(self.copy)
self.selectAllShortcut = QShortcut(QKeySequence.SelectAll, self)
self.selectAllShortcut.activated.connect(self.selectAll)
def setLexers(self):
self.lexer = QsciLexerPython()
loadFont = self.settings.value("pythonConsole/fontfamilytext",
"Monospace")
fontSize = self.settings.value("pythonConsole/fontsize", 10, type=int)
font = QFont(loadFont)
font.setFixedPitch(True)
font.setPointSize(fontSize)
font.setStyleHint(QFont.TypeWriter)
font.setStretch(QFont.SemiCondensed)
font.setLetterSpacing(QFont.PercentageSpacing, 87.0)
font.setBold(False)
self.lexer.setDefaultFont(font)
self.lexer.setDefaultColor(
QColor(
self.settings.value("pythonConsole/defaultFontColor",
QColor(Qt.black))))
self.lexer.setColor(
QColor(
self.settings.value("pythonConsole/commentFontColor",
QColor(Qt.gray))), 1)
self.lexer.setColor(
QColor(
self.settings.value("pythonConsole/keywordFontColor",
QColor(Qt.darkGreen))), 5)
self.lexer.setColor(
QColor(
self.settings.value("pythonConsole/classFontColor",
QColor(Qt.blue))), 8)
self.lexer.setColor(
QColor(
self.settings.value("pythonConsole/methodFontColor",
QColor(Qt.darkGray))), 9)
self.lexer.setColor(
QColor(
self.settings.value("pythonConsole/decorFontColor",
QColor(Qt.darkBlue))), 15)
self.lexer.setColor(
QColor(
self.settings.value("pythonConsole/commentBlockFontColor",
QColor(Qt.gray))), 12)
self.lexer.setColor(
QColor(
self.settings.value("pythonConsole/singleQuoteFontColor",
QColor(Qt.blue))), 4)
self.lexer.setColor(
QColor(
self.settings.value("pythonConsole/doubleQuoteFontColor",
QColor(Qt.blue))), 3)
self.lexer.setColor(
QColor(
self.settings.value("pythonConsole/tripleSingleQuoteFontColor",
QColor(Qt.blue))), 6)
self.lexer.setColor(
QColor(
self.settings.value("pythonConsole/tripleDoubleQuoteFontColor",
QColor(Qt.blue))), 7)
self.lexer.setColor(QColor(Qt.red), 14)
self.lexer.setFont(font, 1)
self.lexer.setFont(font, 2)
self.lexer.setFont(font, 3)
self.lexer.setFont(font, 4)
for style in range(0, 33):
paperColor = QColor(
self.settings.value("pythonConsole/paperBackgroundColor",
QColor(Qt.white)))
self.lexer.setPaper(paperColor, style)
self.setLexer(self.lexer)
def testQgsGradientFillSymbolLayerV2(self):
"""Test setting and getting QgsGradientFillSymbolLayerV2 properties.
"""
mGradientLayer = QgsGradientFillSymbolLayerV2()
mExpectedValue = type(QgsGradientFillSymbolLayerV2())
mValue = type(mGradientLayer)
mMessage = 'Expected "%s" got "%s"' % (mExpectedValue, mValue)
assert mExpectedValue == mValue, mMessage
mExpectedValue = QgsGradientFillSymbolLayerV2.Radial
mGradientLayer.setGradientType(mExpectedValue)
mValue = mGradientLayer.gradientType()
mMessage = 'Expected "%s" got "%s"' % (mExpectedValue, mValue)
assert mExpectedValue == mValue, mMessage
mExpectedValue = QgsGradientFillSymbolLayerV2.ColorRamp
mGradientLayer.setGradientColorType(mExpectedValue)
mValue = mGradientLayer.gradientColorType()
mMessage = 'Expected "%s" got "%s"' % (mExpectedValue, mValue)
assert mExpectedValue == mValue, mMessage
mExpectedValue = QColor('#55aaff')
mGradientLayer.setColor2(mExpectedValue)
mValue = mGradientLayer.color2()
mMessage = 'Expected "%s" got "%s"' % (mExpectedValue, mValue)
assert mExpectedValue == mValue, mMessage
mExpectedValue = QgsGradientFillSymbolLayerV2.Viewport
mGradientLayer.setCoordinateMode(mExpectedValue)
mValue = mGradientLayer.coordinateMode()
mMessage = 'Expected "%s" got "%s"' % (mExpectedValue, mValue)
assert mExpectedValue == mValue, mMessage
mExpectedValue = QgsGradientFillSymbolLayerV2.Reflect
mGradientLayer.setGradientSpread(mExpectedValue)
mValue = mGradientLayer.gradientSpread()
mMessage = 'Expected "%s" got "%s"' % (mExpectedValue, mValue)
assert mExpectedValue == mValue, mMessage
mExpectedValue = QPointF(0.5, 0.8)
mGradientLayer.setReferencePoint1(mExpectedValue)
mValue = mGradientLayer.referencePoint1()
mMessage = 'Expected "%s" got "%s"' % (mExpectedValue, mValue)
assert mExpectedValue == mValue, mMessage
mExpectedValue = True
mGradientLayer.setReferencePoint1IsCentroid(mExpectedValue)
mValue = mGradientLayer.referencePoint1IsCentroid()
mMessage = 'Expected "%s" got "%s"' % (mExpectedValue, mValue)
assert mExpectedValue == mValue, mMessage
mExpectedValue = QPointF(0.2, 0.4)
mGradientLayer.setReferencePoint2(mExpectedValue)
mValue = mGradientLayer.referencePoint2()
mMessage = 'Expected "%s" got "%s"' % (mExpectedValue, mValue)
assert mExpectedValue == mValue, mMessage
mExpectedValue = True
mGradientLayer.setReferencePoint2IsCentroid(mExpectedValue)
mValue = mGradientLayer.referencePoint2IsCentroid()
mMessage = 'Expected "%s" got "%s"' % (mExpectedValue, mValue)
assert mExpectedValue == mValue, mMessage
mExpectedValue = 90
mGradientLayer.setAngle(mExpectedValue)
mValue = mGradientLayer.angle()
mMessage = 'Expected "%s" got "%s"' % (mExpectedValue, mValue)
assert mExpectedValue == mValue, mMessage
mExpectedValue = QPointF(10, 20)
mGradientLayer.setOffset(mExpectedValue)
mValue = mGradientLayer.offset()
mMessage = 'Expected "%s" got "%s"' % (mExpectedValue, mValue)
assert mExpectedValue == mValue, mMessage
mExpectedValue = QgsSymbolV2.MapUnit
mGradientLayer.setOffsetUnit(mExpectedValue)
mValue = mGradientLayer.offsetUnit()
mMessage = 'Expected "%s" got "%s"' % (mExpectedValue, mValue)
assert mExpectedValue == mValue, mMessage
def __init__(self, iface):
"""init window"""
QDialog.__init__(self)
self.setupUi(self)
self.iface = iface
self.map = iface.mapCanvas()
self.settings = QSettings()
self.catalog = None
self.catalog_url = None
self.context = StaticContext()
version = self.context.metadata.get('general', 'version')
self.setWindowTitle('MetaSearch %s' % version)
self.rubber_band = QgsRubberBand(self.map, True) # True = a polygon
self.rubber_band.setColor(QColor(255, 0, 0, 75))
self.rubber_band.setWidth(5)
# form inputs
self.startfrom = 0
self.maxrecords = 10
self.timeout = 10
self.constraints = []
# Servers tab
self.cmbConnectionsServices.activated.connect(self.save_connection)
self.cmbConnectionsSearch.activated.connect(self.save_connection)
self.btnServerInfo.clicked.connect(self.connection_info)
self.btnAddDefault.clicked.connect(self.add_default_connections)
self.btnCapabilities.clicked.connect(self.show_xml)
self.tabWidget.currentChanged.connect(self.populate_connection_list)
# server management buttons
self.btnNew.clicked.connect(self.add_connection)
self.btnEdit.clicked.connect(self.edit_connection)
self.btnDelete.clicked.connect(self.delete_connection)
self.btnLoad.clicked.connect(self.load_connections)
self.btnSave.clicked.connect(save_connections)
# Search tab
self.treeRecords.itemSelectionChanged.connect(self.record_clicked)
self.treeRecords.itemDoubleClicked.connect(self.show_metadata)
self.btnSearch.clicked.connect(self.search)
self.leKeywords.returnPressed.connect(self.search)
# prevent dialog from closing upon pressing enter
self.buttonBox.button(QDialogButtonBox.Close).setAutoDefault(False)
# launch help from button
self.buttonBox.helpRequested.connect(self.help)
self.btnCanvasBbox.setAutoDefault(False)
self.btnCanvasBbox.clicked.connect(self.set_bbox_from_map)
self.btnGlobalBbox.clicked.connect(self.set_bbox_global)
# navigation buttons
self.btnFirst.clicked.connect(self.navigate)
self.btnPrev.clicked.connect(self.navigate)
self.btnNext.clicked.connect(self.navigate)
self.btnLast.clicked.connect(self.navigate)
self.btnAddToWms.clicked.connect(self.add_to_ows)
self.btnAddToWfs.clicked.connect(self.add_to_ows)
self.btnAddToWcs.clicked.connect(self.add_to_ows)
self.btnShowXml.clicked.connect(self.show_xml)
# settings
self.radioTitleAsk.clicked.connect(self.set_ows_save_title_ask)
self.radioTitleNoAsk.clicked.connect(self.set_ows_save_title_no_ask)
self.radioTempName.clicked.connect(self.set_ows_save_temp_name)
self.manageGui()