def test_Scene(self):
'''
@summary: 测试场景描述
'''
#step3:为虚拟机创建子模板
self.assertTrue(
smart_create_template(self.dm.temp_name, self.dm.xml_zi_temp_info1,
self.dm.version_name1))
#step4:使用步骤2模板的最新版本创建虚拟机
self.assertTrue(
smart_create_vm(self.dm.vm_name_new, self.dm.xml_vm_info_temp))
#step5:为虚拟机增加一个网络接口
self.assertTrue(
smart_create_vmnic(self.dm.vm_name, self.dm.nic_info,
self.dm.nic_name))
#step6:为虚拟机创建一个新的子模板
self.assertTrue(
smart_create_template(self.dm.temp_name, self.dm.xml_zi_temp_info2,
self.dm.version_name2))
#step7：检查虚拟机信息应该包含网络接口
if VmNicAPIs().isVmNicExist(self.dm.vm_name_new, self.dm.nic_name):
LogPrint().info("PASS:ITC1004_scene4.")
self.assertTrue(True)
else:
LogPrint().error("FAIL:ITC1004_scene4.")
self.assertTrue(False)
def setUp(self):
self.dm = super(self.__class__, self).setUp()
self.diskapi = DiskAPIs()
#创建一个虚拟机
LogPrint().info("Pre-Test-1: Create vm %s for TC."% self.dm.vm_name)
self.assertTrue(smart_create_vm(self.dm.vm_name, self.dm.vm_info))
#创建一块磁盘
'''
@note: 创建磁盘时，磁盘的sharable属性必须为false，因为共享磁盘不作为模板的一部份
'''
LogPrint().info("Pre-Test-2: Create a disk for TC.")
r= smart_create_disk(self.dm.disk_info, self.dm.disk_name)
self.assertTrue(r[0])
self.disk_id = r[1]
#将该磁盘附加到虚拟机
LogPrint().info("Pre-Test-3: Attach disk %s to vm %s for TC."% (self.dm.disk_name
,self.dm.vm_name))
self.vmdiskapi = VmDiskAPIs()
r=self.vmdiskapi.attachDiskToVm(self.dm.vm_name, self.disk_id)
if r['status_code'] == 200:
LogPrint().info("Attach Disk to vm success.")
else:
LogPrint().error("Attach Disk to vm fail.Status-code is wrong.")
self.assertTrue(False)
#启动虚拟机
LogPrint().info("Pre-Test-4: Start vm for TC.")
self.assertTrue(smart_start_vm(self.dm.vm_name))
#激活磁盘
LogPrint().info("Pre-Test-5: Active vmdisk for TC.")
self.assertTrue(smart_active_vmdisk(self.dm.vm_name,self.disk_id))
def test_Scene(self):
'''
@summary: 测试场景描述
'''
volumeapi = GlusterVolumeAPIs()
#创建一个distributed_replicate类型的卷disrep，Replica Count=2，brick=4
LogPrint().info("Create volume disrep")
r = volumeapi.createGlusterVolume(self.dm.cluster_name, self.dm.xml_volume_disrep)
if r['status_code'] == self.dm.expected_status_code_create_volume:
LogPrint().info("PASS:Create volume disrep success.")
self.flag = True
else:
LogPrint().error("FAIL:Status_code is WRONG.")
self.flag = False
self.assertTrue(self.flag)
LogPrint().info("Start volume disrep")
r = volumeapi.startGlusterVolume(self.dm.cluster_name, "disrep")
if r['status_code'] == self.dm.expected_status_code_start_volume:
def is_volume_up():
return volumeapi.getClusterVolumeStatus(self.dm.cluster_name, "disrep") == "up"
if wait_until(is_volume_up, 600, 5):
LogPrint().info("PASS:Start volume disrep success.")
self.flag = True
else:
LogPrint().error("FAIL:Start volume failed.Status is not UP.")
self.flag = False
else:
LogPrint().error("FAIL:Status_code is WRONG.")
self.flag = False
self.assertTrue(self.flag)
#
# #利用该卷创建一个glusterfs类型的存储域
sdapi = StorageDomainAPIs()
LogPrint().info("Create glusterfs storagedomain '%s'."%self.dm.sd_name)
r = sdapi.createStorageDomain(self.dm.xml_sd_info)
if r['status_code'] == self.dm.expected_status_code_create_sd:
LogPrint().info("PASS:Create glusterfs storagedomain '%s' SUCCESS."%self.dm.sd_name)
self.flag=True
else:
LogPrint().info("FAIL:Create glusterfs storagedomain '%s' FAIL."%self.dm.sd_name)
self.flag=False
self.assertTrue(self.flag)
# #将存储域附加到数据中心
LogPrint().info("Attach glusterfs storagedomain '%s'to DC '%s'."%(self.dm.sd_name, self.dm.dc_name))
self.assertTrue(smart_attach_storage_domain(self.dm.dc_name, self.dm.sd_name))
# #创建虚拟机,为虚拟机添加磁盘，启动虚拟机
LogPrint().info("Create a VM '%s'."%self.dm.vm_name)
self.assertTrue(smart_create_vm(self.dm.vm_name, self.dm.xml_vm_info))
LogPrint().info("ADD DISK '%s' for VM '%s'."%(self.dm.disk_alias,self.dm.vm_name))
self.assertTrue(smart_create_vmdisk(self.dm.vm_name, self.dm.xml_disk_info, self.dm.disk_alias)[0])
LogPrint().info("Start VM '%s'."%(self.dm.vm_name))
self.assertTrue(smart_start_vm(self.dm.vm_name))
# #关闭虚拟机，创建模板,创建子模板
LogPrint().info("Stop VM '%s'."%(self.dm.vm_name))
self.assertTrue(smart_stop_vm(self.dm.vm_name))
self.assertTrue(smart_create_template(self.dm.base_temp_name, self.dm.temp_info))
self.assertTrue(smart_create_template(self.dm.base_temp_name, self.dm.zi_temp_info, self.dm.temp_name))
def setUp(self):
self.dm = super(self.__class__, self).setUp()
#创建一个虚拟机
LogPrint().info("Pre-Test-1: Create vm %s for TC."% self.dm.vm_name)
self.assertTrue(smart_create_vm(self.dm.vm_name, self.dm.vm_info))
#创建一块磁盘
'''
@note: 创建磁盘时，磁盘的sharable属性必须为false，因为共享磁盘不作为模板的一部份
'''
LogPrint().info("Pre-Test-2: Create a disk for TC.")
r= smart_create_disk(self.dm.disk_info, self.dm.disk_name)
self.assertTrue(r[0])
self.disk_id = r[1]
#将该磁盘附加到虚拟机上
LogPrint().info("Pre-Test-3: Attach disk %s to vm %s for TC."% (self.dm.disk_name
,self.dm.vm_name))
self.vmdiskapi = VmDiskAPIs()
r=self.vmdiskapi.attachDiskToVm(self.dm.vm_name, self.disk_id)
if r['status_code'] == 200:
LogPrint().info("Attach Disk to vm success.")
else:
LogPrint().error("Attach Disk to vm fail.Status-code is wrong.")
self.assertTrue(False)
#该虚拟机创建模板
LogPrint().info("Pre-Test-4: Create template for vm %s for TC."% self.dm.vm_name)
self.tempapi = TemplatesAPIs()
self.vm_id = VirtualMachineAPIs().getVmIdByName(self.dm.vm_name)
r = self.tempapi.createTemplate(self.dm.temp_info, self.vm_id)
def is_temp_ok():
return self.tempapi.getTemplateInfo(temp_name=self.dm.temp_name)['result']['template']['status']['state']=='ok'
if r['status_code'] == 202:
if wait_until(is_temp_ok, 600, 10):
LogPrint().info("Create Template ok.")
else:
LogPrint().error("Create Template overtime")
self.assertTrue(False)
else:
LogPrint().error("Create Template failed.Status-code is wrong.")
self.assertTrue(False)
#获得模板关联的磁盘id
r = TemplateDisksAPIs().getTemplateDiskInfo(self.dm.temp_name, self.dm.disk_name)
if r['status_code'] == 200:
self.disk_id_temp = r['result']['disk']['@id']
else:
self.assertTrue(False)
def test_Scene(self):
'''
@summary: 测试场景描述
'''
#step3:为虚拟机创建子模板
self.assertTrue(smart_create_template(self.dm.temp_name, self.dm.xml_zi_temp_info1, self.dm.version_name1))
#step4:使用步骤2模板的最新版本创建虚拟机
self.assertTrue(smart_create_vm(self.dm.vm_name_new, self.dm.xml_vm_info_temp))
#step5:为虚拟机增加一个网络接口
self.assertTrue(smart_create_vmnic(self.dm.vm_name,self.dm.nic_info,self.dm.nic_name))
#step6:为虚拟机创建一个新的子模板
self.assertTrue(smart_create_template(self.dm.temp_name, self.dm.xml_zi_temp_info2, self.dm.version_name2))
#step7：检查虚拟机信息应该包含网络接口
if VmNicAPIs().isVmNicExist(self.dm.vm_name_new, self.dm.nic_name):
LogPrint().info("PASS:ITC1004_scene4.")
self.assertTrue(True)
else:
LogPrint().error("FAIL:ITC1004_scene4.")
self.assertTrue(False)
def test(self):
#step1:创建一个虚拟机
self.assertTrue(smart_create_vm(self.dm.vm_name, self.dm.xml_vm_info))
#step2:为虚拟机创建模板
vm_id = VirtualMachineAPIs().getVmIdByName(self.dm.vm_name)
TemplatesAPIs().createTemplate(self.dm.xml_temp_info, vm_id)
def test_Scene(self):
'''
@summary: 测试场景描述
'''
volumeapi = GlusterVolumeAPIs()
#创建一个distributed_replicate类型的卷disrep，Replica Count=2，brick=4
LogPrint().info("Create volume disrep")
r = volumeapi.createGlusterVolume(self.dm.cluster_name,
self.dm.xml_volume_disrep)
if r['status_code'] == self.dm.expected_status_code_create_volume:
LogPrint().info("PASS:Create volume disrep success.")
self.flag = True
else:
LogPrint().error("FAIL:Status_code is WRONG.")
self.flag = False
self.assertTrue(self.flag)
LogPrint().info("Start volume disrep")
r = volumeapi.startGlusterVolume(self.dm.cluster_name, "disrep")
if r['status_code'] == self.dm.expected_status_code_start_volume:
def is_volume_up():
return volumeapi.getClusterVolumeStatus(
self.dm.cluster_name, "disrep") == "up"
if wait_until(is_volume_up, 600, 5):
LogPrint().info("PASS:Start volume disrep success.")
self.flag = True
else:
LogPrint().error("FAIL:Start volume failed.Status is not UP.")
self.flag = False
else:
LogPrint().error("FAIL:Status_code is WRONG.")
self.flag = False
self.assertTrue(self.flag)
#
# #利用该卷创建一个glusterfs类型的存储域
sdapi = StorageDomainAPIs()
LogPrint().info("Create glusterfs storagedomain '%s'." %
self.dm.sd_name)
r = sdapi.createStorageDomain(self.dm.xml_sd_info)
if r['status_code'] == self.dm.expected_status_code_create_sd:
LogPrint().info(
"PASS:Create glusterfs storagedomain '%s' SUCCESS." %
self.dm.sd_name)
self.flag = True
else:
LogPrint().info("FAIL:Create glusterfs storagedomain '%s' FAIL." %
self.dm.sd_name)
self.flag = False
self.assertTrue(self.flag)
# #将存储域附加到数据中心
LogPrint().info("Attach glusterfs storagedomain '%s'to DC '%s'." %
(self.dm.sd_name, self.dm.dc_name))
self.assertTrue(
smart_attach_storage_domain(self.dm.dc_name, self.dm.sd_name))
# #创建虚拟机,为虚拟机添加磁盘，启动虚拟机
LogPrint().info("Create a VM '%s'." % self.dm.vm_name)
self.assertTrue(smart_create_vm(self.dm.vm_name, self.dm.xml_vm_info))
LogPrint().info("ADD DISK '%s' for VM '%s'." %
(self.dm.disk_alias, self.dm.vm_name))
self.assertTrue(
smart_create_vmdisk(self.dm.vm_name, self.dm.xml_disk_info,
self.dm.disk_alias)[0])
LogPrint().info("Start VM '%s'." % (self.dm.vm_name))
self.assertTrue(smart_start_vm(self.dm.vm_name))
# #关闭虚拟机，创建模板,创建子模板
LogPrint().info("Stop VM '%s'." % (self.dm.vm_name))
self.assertTrue(smart_stop_vm(self.dm.vm_name))
self.assertTrue(
smart_create_template(self.dm.base_temp_name, self.dm.temp_info))
self.assertTrue(
smart_create_template(self.dm.base_temp_name, self.dm.zi_temp_info,
self.dm.temp_name))
def test(self):
#step1:创建一个虚拟机
self.assertTrue(smart_create_vm(self.dm.vm_name, self.dm.xml_vm_info))
#step2:为虚拟机创建模板
vm_id = VirtualMachineAPIs().getVmIdByName(self.dm.vm_name)
TemplatesAPIs().createTemplate(self.dm.xml_temp_info, vm_id)
