def test_export_array_contours(): from flopy.discretization import StructuredGrid from flopy.export.utils import export_array_contours nrow = 7 ncol = 11 epsg = 4111 # no epsg code modelgrid = StructuredGrid(delr=np.ones(ncol) * 1.1, delc=np.ones(nrow) * 1.1) filename = os.path.join(spth, 'myarraycontours1.shp') a = np.arange(nrow * ncol).reshape((nrow, ncol)) export_array_contours(modelgrid, filename, a) assert os.path.isfile(filename), 'did not create contour shapefile' # with modelgrid epsg code modelgrid = StructuredGrid(delr=np.ones(ncol) * 1.1, delc=np.ones(nrow) * 1.1, epsg=epsg) filename = os.path.join(spth, 'myarraycontours2.shp') a = np.arange(nrow * ncol).reshape((nrow, ncol)) export_array_contours(modelgrid, filename, a) assert os.path.isfile(filename), 'did not create contour shapefile' # with passing in epsg code modelgrid = StructuredGrid(delr=np.ones(ncol) * 1.1, delc=np.ones(nrow) * 1.1) filename = os.path.join(spth, 'myarraycontours3.shp') a = np.arange(nrow * ncol).reshape((nrow, ncol)) export_array_contours(modelgrid, filename, a, epsg=epsg) assert os.path.isfile(filename), 'did not create contour shapefile' return
def __new__(cls, ax=None, model=None, dis=None, line=None, xul=None, yul=None, rotation=None, extent=None): from flopy.plot.plotbase import DeprecatedCrossSection from flopy.discretization import StructuredGrid err_msg = "ModelCrossSection will be replaced by " +\ "PlotCrossSection(), Calling PlotCrossSection()" warnings.warn(err_msg, PendingDeprecationWarning) modelgrid = None if model is not None: if (xul, yul, rotation) != (None, None, None): modelgrid = plotutil._set_coord_info(model.modelgrid, xul, yul, None, None, rotation) elif dis is not None: modelgrid = StructuredGrid(delr=dis.delr.array, delc=dis.delc.array, top=dis.top.array, botm=dis.botm.array) if (xul, yul, rotation) != (None, None, None): modelgrid = plotutil._set_coord_info(modelgrid, xul, yul, None, None, rotation) return DeprecatedCrossSection(ax=ax, model=model, modelgrid=modelgrid, line=line, extent=extent)
def test_get_vertices(): from flopy.utils.reference import SpatialReference from flopy.discretization import StructuredGrid m = flopy.modflow.Modflow(rotation=20.) nrow, ncol = 40, 20 dis = flopy.modflow.ModflowDis(m, nlay=1, nrow=nrow, ncol=ncol, delr=250., delc=250., top=10, botm=0) xul, yul = 500000, 2934000 sr = SpatialReference(delc=m.dis.delc.array, xul=xul, yul=yul, rotation=45.) mg = StructuredGrid(delc=m.dis.delc.array, delr=m.dis.delr.array, xoff=sr.xll, yoff=sr.yll, angrot=sr.rotation) xgrid = mg.xvertices ygrid = mg.yvertices # a1 = np.array(mg.xyvertices) a1 = np.array([[xgrid[0, 0], ygrid[0, 0]], [xgrid[0, 1], ygrid[0, 1]], [xgrid[1, 1], ygrid[1, 1]], [xgrid[1, 0], ygrid[1, 0]]]) a2 = np.array(mg.get_cell_vertices(0, 0)) assert np.array_equal(a1, a2)
def load_with_crs(path, xll, yll, epsg=4326, rot=None): try: instance = InowasModflowReadAdapter.load(path) # Transform to UTM with WGS84 as intermediate tf = Transformer.from_crs(epsg, 4326, always_xy=True, skip_equivalent=True) wgs84_xll, wgs84_yll = tf.transform(xll, yll) # Calculate the UTM-EPSG to use with pyproj _, _, zone_number, _ = utm.from_latlon(wgs84_yll, wgs84_xll) utm_epsg = f"326{zone_number:02d}" if wgs84_yll >= 0 else f"327{zone_number:02d}" tf = Transformer.from_crs(4326, int(utm_epsg), always_xy=True, skip_equivalent=True) xoff, yoff = tf.transform(wgs84_xll, wgs84_yll) modelgrid = instance._mf.modelgrid updated_modelgrid = StructuredGrid( modelgrid.delc, modelgrid.delr, modelgrid.top, modelgrid.botm, modelgrid.idomain, modelgrid.lenuni, epsg=utm_epsg, xoff=xoff, yoff=yoff, angrot=rot if not None else modelgrid.angrot ) instance._mf.modelgrid = updated_modelgrid return instance except: raise
def test_read_usgs_model_reference(): nlay, nrow, ncol = 1, 30, 5 delr, delc = 250, 500 #xll, yll = 272300, 5086000 model_ws = os.path.join('temp', 't007') mrf = os.path.join(model_ws, 'usgs.model.reference') shutil.copy('../examples/data/usgs.model.reference', mrf) fm = flopy.modflow m = fm.Modflow(modelname='junk', model_ws=model_ws) # feet and days dis = fm.ModflowDis(m, nlay=nlay, nrow=nrow, ncol=ncol, delr=delr, delc=delc, lenuni=1, itmuni=4) m.write_input() # test reading of SR information from usgs.model.reference m2 = fm.Modflow.load('junk.nam', model_ws=os.path.join('temp', 't007')) from flopy.discretization import StructuredGrid mg = StructuredGrid(delr=dis.delr.array, delc=dis.delc.array) mg.read_usgs_model_reference_file(mrf) m2.modelgrid = mg assert m2.modelgrid.xoffset == mg.xoffset assert m2.modelgrid.yoffset == mg.yoffset assert m2.modelgrid.angrot == mg.angrot assert m2.modelgrid.epsg == mg.epsg # test reading non-default units from usgs.model.reference shutil.copy(mrf, mrf + '_copy') with open(mrf + '_copy') as src: with open(mrf, 'w') as dst: for line in src: if 'epsg' in line: line = line.replace("102733", '4326') dst.write(line) m2 = fm.Modflow.load('junk.nam', model_ws=os.path.join('temp', 't007')) m2.modelgrid.read_usgs_model_reference_file(mrf) assert m2.modelgrid.epsg == 4326 # have to delete this, otherwise it will mess up other tests to_del = glob.glob(mrf + '*') for f in to_del: if os.path.exists(f): os.remove(os.path.join(f)) assert True
def test_const(): fm = flopy.modflow m = fm.Modflow() dis = fm.ModflowDis(m, 1, 10, 10, lenuni=2, itmuni=4) m.modelgrid = StructuredGrid(delc=dis.delc.array, delr=dis.delr.array,) r, d = create_sfr_data() sfr = flopy.modflow.ModflowSfr2(m, reach_data=r, segment_data={0: d}) assert sfr.const == 86400. m.dis.itmuni = 1. m.sfr.const = None assert sfr.const == 1. m.dis.lenuni = 1. m.sfr.const = None assert sfr.const == 1.486 m.dis.itmuni = 4. m.sfr.const = None assert sfr.const == 1.486 * 86400. assert True
def test_write_shapefile(): from flopy.discretization import StructuredGrid from flopy.export.shapefile_utils import shp2recarray from flopy.export.shapefile_utils import write_grid_shapefile, write_grid_shapefile2 sg = StructuredGrid( delr=np.ones(10) * 1.1, # cell spacing along model rows delc=np.ones(10) * 1.1, # cell spacing along model columns epsg=26715) outshp1 = os.path.join(tpth, 'junk.shp') outshp2 = os.path.join(tpth, 'junk2.shp') write_grid_shapefile(outshp1, sg, array_dict={}) write_grid_shapefile2(outshp2, sg, array_dict={}) # test that vertices aren't getting altered by writing shapefile for outshp in [outshp1, outshp2]: # check that pyshp reads integers # this only check that row/column were recorded as "N" # not how they will be cast by python or numpy import shapefile as sf sfobj = sf.Reader(outshp) for f in sfobj.fields: if f[0] == 'row' or f[0] == 'column': assert f[1] == 'N' recs = list(sfobj.records()) for r in recs[0]: assert isinstance(r, int) # check that row and column appear as integers in recarray ra = shp2recarray(outshp) assert np.issubdtype(ra.dtype['row'], np.integer) assert np.issubdtype(ra.dtype['column'], np.integer) try: # check that fiona reads integers import fiona with fiona.open(outshp) as src: meta = src.meta assert 'int' in meta['schema']['properties']['row'] assert 'int' in meta['schema']['properties']['column'] except: pass
def modelgrid(self): if not self._mg_resync: return self._modelgrid bas = self.mf.get_package("BAS6") if bas is not None: ibound = self.btn.icbund.array else: ibound = None # build grid self._modelgrid = StructuredGrid(delc=self.mf.dis.delc.array, delr=self.mf.dis.delr.array, top=self.mf.dis.top.array, botm=self.mf.dis.botm.array, idomain=ibound, proj4=self._modelgrid.proj4, epsg=self._modelgrid.epsg, xoff=self._modelgrid.xoffset, yoff=self._modelgrid.yoffset, angrot=self._modelgrid.angrot) # resolve offsets xoff = self._modelgrid.xoffset if xoff is None: if self._xul is not None: xoff = self._modelgrid._xul_to_xll(self._xul) else: xoff = 0.0 yoff = self._modelgrid.yoffset if yoff is None: if self._yul is not None: yoff = self._modelgrid._yul_to_yll(self._yul) else: yoff = 0.0 self._modelgrid.set_coord_info(xoff, yoff, self._modelgrid.angrot, self._modelgrid.epsg, self._modelgrid.proj4) return self._modelgrid
def test_export(): fm = flopy.modflow m = fm.Modflow() dis = fm.ModflowDis(m, 1, 10, 10, lenuni=2, itmuni=4) sr = SpatialReference(xul=0.0, yul=0.0, delc=m.dis.delc.array) m.modelgrid = StructuredGrid(delc=m.dis.delc.array, delr=m.dis.delr.array, xoff=sr.xll, yoff=sr.yll) # m.sr.origin_loc = "ll" if not shapefile: return # skip m.export(os.path.join(outpath, 'grid.shp')) r, d = create_sfr_data() sfr = flopy.modflow.ModflowSfr2(m, reach_data=r, segment_data={0: d}) sfr.segment_data[0]['flow'][-1] = 1e4 sfr.stress_period_data.export(os.path.join(outpath, 'sfr.shp'), sparse=True) sfr.export_linkages(os.path.join(outpath, 'linkages.shp')) sfr.export_outlets(os.path.join(outpath, 'outlets.shp')) sfr.export_transient_variable(os.path.join(outpath, 'inlets.shp'), 'flow') from flopy.export.shapefile_utils import shp2recarray ra = shp2recarray(os.path.join(outpath, 'inlets.shp')) assert ra.flow0[0] == 1e4 ra = shp2recarray(os.path.join(outpath, 'outlets.shp')) assert ra.iseg[0] + ra.ireach[0] == 5 ra = shp2recarray(os.path.join(outpath, 'linkages.shp')) crds = np.array(list(ra.geometry[2].coords)) assert np.array_equal(crds, np.array([[2.5, 4.5], [3.5, 5.5]])) ra = shp2recarray(os.path.join(outpath, 'sfr.shp')) assert ra.iseg.sum() == sfr.reach_data.iseg.sum() assert ra.ireach.sum() == sfr.reach_data.ireach.sum() y = np.concatenate([np.array(g.exterior)[:, 1] for g in ra.geometry]) x = np.concatenate([np.array(g.exterior)[:, 0] for g in ra.geometry]) assert (x.min(), x.max(), y.min(), y.max()) == m.modelgrid.extent assert ra[(ra.iseg == 2) & (ra.ireach == 1)]['geometry'][0].bounds \ == (6.0, 2.0, 7.0, 3.0)
def modelgrid(self): if not self._mg_resync: return self._modelgrid if self.bas is not None: ibound = self.bas.ibound.array else: ibound = None self._modelgrid = StructuredGrid(self.bcf.delc.array, self.bcf.delr.array, None, None, ibound, self.bas.lenuni, proj4=self._modelgrid.proj4, epsg=self._modelgrid.epsg, xoff=self._modelgrid.xoffset, yoff=self._modelgrid.yoffset, angrot=self._modelgrid.angrot) # resolve offsets xoff = self._modelgrid.xoffset if xoff is None: if self._xul is not None: xoff = self._modelgrid._xul_to_xll(self._xul) else: xoff = 0.0 yoff = self._modelgrid.yoffset if yoff is None: if self._yul is not None: yoff = self._modelgrid._yul_to_yll(self._yul) else: yoff = 0.0 self._modelgrid.set_coord_info(xoff, yoff, self._modelgrid.angrot, self._modelgrid.epsg, self._modelgrid.proj4) return self._modelgrid
def test_structured_thick(): nlay, nrow, ncol = 3, 2, 3 delc = 1.0 * np.ones(nrow, dtype=float) delr = 1.0 * np.ones(ncol, dtype=float) top = 10.0 * np.ones((nrow, ncol), dtype=float) botm = np.zeros((nlay, nrow, ncol), dtype=float) botm[0, :, :] = 5.0 botm[1, :, :] = 0.0 botm[2, :, :] = -5.0 grid = StructuredGrid( nlay=nlay, nrow=nrow, ncol=ncol, delc=delc, delr=delr, top=top, botm=botm, ) thick = grid.thick assert np.allclose(thick, 5.0), "thicknesses != 5." sat_thick = grid.saturated_thick(grid.botm + 10.0) assert np.allclose(sat_thick, thick), "saturated thicknesses != 5." sat_thick = grid.saturated_thick(grid.botm + 5.0) assert np.allclose(sat_thick, thick), "saturated thicknesses != 5." sat_thick = grid.saturated_thick(grid.botm + 2.5) assert np.allclose(sat_thick, 2.5), "saturated thicknesses != 2.5" sat_thick = grid.saturated_thick(grid.botm) assert np.allclose(sat_thick, 0.0), "saturated thicknesses != 0." sat_thick = grid.saturated_thick(grid.botm - 100.0) assert np.allclose(sat_thick, 0.0), "saturated thicknesses != 0." return
def test_get_destination_data(): m = flopy.modflow.Modflow.load('EXAMPLE.nam', model_ws=path) mg1 = m.modelgrid mg1.set_coord_info(xoff=mg1._xul_to_xll(0.0, 30.0), yoff=mg1._yul_to_yll(0.0, 30.0), angrot=30.0) mg = StructuredGrid(delc=m.dis.delc.array, delr=m.dis.delr.array) mg.set_coord_info(xoff=mg._xul_to_xll(1000.0, 30.0), yoff=mg._yul_to_yll(1000.0, 30.0), angrot=30.0) # test deprecation sr2 = SpatialReference(xll=mg.xoffset, yll=mg.yoffset, rotation=-30) if shapefile: m.dis.export(path + '/dis.shp') pthld = PathlineFile(os.path.join(path, 'EXAMPLE-3.pathline')) epd = EndpointFile(os.path.join(path, 'EXAMPLE-3.endpoint')) well_epd = epd.get_destination_endpoint_data(dest_cells=[(4, 12, 12)]) well_pthld = pthld.get_destination_pathline_data(dest_cells=[(4, 12, 12)], to_recarray=True) # same particle IDs should be in both endpoint data and pathline data tval = len(set(well_epd.particleid).difference(set(well_pthld.particleid))) msg = 'same particle IDs should be in both endpoint data and pathline data' assert tval == 0, msg # check that all starting locations are included in the pathline data # (pathline data slice not just endpoints) starting_locs = ra_slice(well_epd, ['k0', 'i0', 'j0']) pathline_locs = np.array(np.array(well_pthld)[['k', 'i', 'j']].tolist(), dtype=starting_locs.dtype) assert np.all(np.in1d(starting_locs, pathline_locs)) if shapefile is None: return # skip remainder # test writing a shapefile of endpoints epd.write_shapefile(well_epd, direction='starting', shpname=os.path.join(path, 'starting_locs.shp'), mg=m.modelgrid) # test writing shapefile of pathlines fpth = os.path.join(path, 'pathlines_1per.shp') pthld.write_shapefile(well_pthld, one_per_particle=True, direction='starting', mg=m.modelgrid, shpname=fpth) fpth = os.path.join(path, 'pathlines_1per_end.shp') pthld.write_shapefile(well_pthld, one_per_particle=True, direction='ending', mg=m.modelgrid, shpname=fpth) # test writing shapefile of pathlines fpth = os.path.join(path, 'pathlines_1per2.shp') pthld.write_shapefile(well_pthld, one_per_particle=True, direction='starting', mg=mg, shpname=fpth) # test writing shapefile of pathlines fpth = os.path.join(path, 'pathlines_1per2_ll.shp') pthld.write_shapefile(well_pthld, one_per_particle=True, direction='starting', mg=sr2, shpname=fpth) fpth = os.path.join(path, 'pathlines.shp') pthld.write_shapefile(well_pthld, one_per_particle=False, mg=m.modelgrid, shpname=fpth) # test that endpoints were rotated and written correctly from flopy.export.shapefile_utils import shp2recarray ra = shp2recarray(os.path.join(path, 'starting_locs.shp')) p3 = ra.geometry[ra.particleid == 4][0] xorig, yorig = m.modelgrid.get_coords(well_epd.x0[0], well_epd.y0[0]) assert p3.x - xorig + p3.y - yorig < 1e-4 xorig, yorig = mg1.xcellcenters[3, 4], mg1.ycellcenters[3, 4] assert np.abs(p3.x - xorig + p3.y - yorig) < 1e-4 # this also checks for 1-based # test that particle attribute information is consistent with pathline file ra = shp2recarray(os.path.join(path, 'pathlines.shp')) inds = (ra.particleid == 8) & (ra.i == 12) & (ra.j == 12) assert ra.time[inds][0] - 20181.7 < .1 assert ra.xloc[inds][0] - 0.933 < .01 # test that k, i, j are correct for single geometry pathlines, forwards # and backwards ra = shp2recarray(os.path.join(path, 'pathlines_1per.shp')) assert ra.i[0] == 4, ra.j[0] == 5 ra = shp2recarray(os.path.join(path, 'pathlines_1per_end.shp')) assert ra.i[0] == 13, ra.j[0] == 13 # test use of arbitrary spatial reference and offset mg1.set_coord_info(xoff=mg.xoffset, yoff=mg.yoffset, angrot=mg.angrot, epsg=mg.epsg, proj4=mg.proj4) ra = shp2recarray(os.path.join(path, 'pathlines_1per2.shp')) p3_2 = ra.geometry[ra.particleid == 4][0] test1 = mg1.xcellcenters[3, 4] test2 = mg1.ycellcenters[3, 4] assert np.abs(p3_2.x[0] - mg1.xcellcenters[3, 4] + p3_2.y[0] - mg1.ycellcenters[3, 4]) < 1e-4 # arbitrary spatial reference with ll specified instead of ul ra = shp2recarray(os.path.join(path, 'pathlines_1per2_ll.shp')) p3_2 = ra.geometry[ra.particleid == 4][0] #sr3 = SpatialReference(xll=sr.xll, yll=sr.yll, rotation=-30, # delc=list(m.dis.delc)) mg.set_coord_info(xoff=mg.xoffset, yoff=mg.yoffset, angrot=-30.0) assert np.abs(p3_2.x[0] - mg.xcellcenters[3, 4] + p3_2.y[0] - mg.ycellcenters[3, 4]) < 1e-4 xul = 3628793 yul = 21940389 m = flopy.modflow.Modflow.load('EXAMPLE.nam', model_ws=path) mg4 = m.modelgrid mg4.set_coord_info(xoff=mg4._xul_to_xll(xul, 0.0), yoff=mg4._yul_to_yll(yul, 0.0), angrot=0.0, epsg=mg4.epsg, proj4=mg4.proj4) fpth = os.path.join(path, 'dis2.shp') m.dis.export(fpth) pthobj = flopy.utils.PathlineFile(os.path.join(path, 'EXAMPLE-3.pathline')) fpth = os.path.join(path, 'pathlines_1per3.shp') pthobj.write_shapefile(shpname=fpth, direction='ending', mg=mg4)
def test_freyberg_export(): from flopy.discretization import StructuredGrid namfile = 'freyberg.nam' # steady state model_ws = '../examples/data/freyberg' m = flopy.modflow.Modflow.load(namfile, model_ws=model_ws, check=False, verbose=False) # test export at model, package and object levels m.export('{}/model.shp'.format(spth)) m.wel.export('{}/wel.shp'.format(spth)) m.lpf.hk.export('{}/hk.shp'.format(spth)) m.riv.stress_period_data.export('{}/riv_spd.shp'.format(spth)) # transient # (doesn't work at model level because the total size of # the attribute fields exceeds the shapefile limit) model_ws = '../examples/data/freyberg_multilayer_transient/' m = flopy.modflow.Modflow.load( namfile, model_ws=model_ws, verbose=False, load_only=['DIS', 'BAS6', 'NWT', 'OC', 'RCH', 'WEL', 'DRN', 'UPW']) # test export without instantiating an sr outshp = os.path.join(spth, namfile[:-4] + '_drn_sparse.shp') m.drn.stress_period_data.export(outshp, sparse=True) assert os.path.exists(outshp) remove_shp(outshp) m.modelgrid = StructuredGrid(delc=m.dis.delc.array, delr=m.dis.delr.array, epsg=5070) # test export with an sr, regardless of whether or not wkt was found m.drn.stress_period_data.export(outshp, sparse=True) assert os.path.exists(outshp) remove_shp(outshp) m.modelgrid = StructuredGrid(delc=m.dis.delc.array, delr=m.dis.delr.array, epsg=3070) # verify that attributes have same sr as parent assert m.drn.stress_period_data.mg.epsg == m.modelgrid.epsg assert m.drn.stress_period_data.mg.proj4 == m.modelgrid.proj4 assert m.drn.stress_period_data.mg.xoffset == m.modelgrid.xoffset assert m.drn.stress_period_data.mg.yoffset == m.modelgrid.yoffset assert m.drn.stress_period_data.mg.angrot == m.modelgrid.angrot # if wkt text was fetched from spatialreference.org if m.sr.wkt is not None: # test default package export outshp = os.path.join(spth, namfile[:-4] + '_dis.shp') m.dis.export(outshp) prjfile = outshp.replace('.shp', '.prj') with open(prjfile) as src: prjtxt = src.read() assert prjtxt == m.sr.wkt remove_shp(outshp) # test default package export to higher level dir outshp = os.path.join(spth, namfile[:-4] + '_dis.shp') m.dis.export(outshp) prjfile = outshp.replace('.shp', '.prj') with open(prjfile) as src: prjtxt = src.read() assert prjtxt == m.sr.wkt remove_shp(outshp) # test sparse package export outshp = os.path.join(spth, namfile[:-4] + '_drn_sparse.shp') m.drn.stress_period_data.export(outshp, sparse=True) prjfile = outshp.replace('.shp', '.prj') assert os.path.exists(prjfile) with open(prjfile) as src: prjtxt = src.read() assert prjtxt == m.sr.wkt remove_shp(outshp)
def test_mf6_grid_shp_export(): nlay = 2 nrow = 10 ncol = 10 top = 1 nper = 2 perlen = 1 nstp = 1 tsmult = 1 perioddata = [[perlen, nstp, tsmult]]*2 botm=np.zeros((2, 10, 10)) ogsr = OGsr(delc=np.ones(nrow), delr=np.ones(ncol), xll=10, yll=10 ) m = fm.Modflow('junk', version='mfnwt', model_ws=tmpdir) dis = fm.ModflowDis(m, nlay=nlay, nrow=nrow, ncol=ncol, nper=nper, perlen=perlen, nstp=nstp, tsmult=tsmult, top=top, botm=botm) smg = StructuredGrid(delc=np.ones(nrow), delr=np.ones(ncol), top=dis.top.array, botm=botm, idomain=1, xoff=10, yoff=10) # River package (MFlist) spd = fm.ModflowRiv.get_empty(10) spd['i'] = np.arange(10) spd['j'] = [5, 5, 6, 6, 7, 7, 7, 8, 9, 9] spd['stage'] = np.linspace(1, 0.7, 10) spd['rbot'] = spd['stage'] - 0.1 spd['cond'] = 50. riv = fm.ModflowRiv(m, stress_period_data={0: spd}) # Recharge package (transient 2d) rech = {0: 0.001, 1: 0.002} rch = fm.ModflowRch(m, rech=rech) # mf6 version of same model mf6name = 'junk6' sim = fp6.MFSimulation(sim_name=mf6name, version='mf6', exe_name='mf6', sim_ws=tmpdir) tdis = flopy.mf6.modflow.mftdis.ModflowTdis(sim, pname='tdis', time_units='DAYS', nper=nper, perioddata=perioddata) gwf = fp6.ModflowGwf(sim, modelname=mf6name, model_nam_file='{}.nam'.format(mf6name)) dis6 = fp6.ModflowGwfdis(gwf, pname='dis', nlay=nlay, nrow=nrow, ncol=ncol, top=top, botm=botm) def cellid(k, i, j, nrow, ncol): return k*nrow*ncol + i*ncol + j # Riv6 spd6 = fp6.ModflowGwfriv.stress_period_data.empty(gwf, maxbound=len(spd)) #spd6[0]['cellid'] = cellid(spd.k, spd.i, spd.j, m.nrow, m.ncol) spd6[0]['cellid'] = list(zip(spd.k, spd.i, spd.j)) for c in spd.dtype.names: if c in spd6[0].dtype.names: spd6[0][c] = spd[c] # MFTransient list apparently requires entries for additional stress periods, # even if they are the same spd6[1] = spd6[0] #irch = np.zeros((nrow, ncol)) riv6 = fp6.ModflowGwfriv(gwf, stress_period_data=spd6) rch6 = fp6.ModflowGwfrcha(gwf, recharge=rech) if shapefile: #rch6.export('{}/mf6.shp'.format(tmpdir)) m.export('{}/mfnwt.shp'.format(tmpdir)) gwf.export('{}/mf6.shp'.format(tmpdir)) riv6spdarrays = dict(riv6.stress_period_data.masked_4D_arrays_itr()) rivspdarrays = dict(riv.stress_period_data.masked_4D_arrays_itr()) for k, v in rivspdarrays.items(): assert np.abs(np.nansum(v) - np.nansum(riv6spdarrays[k])) < 1e-6, "variable {} is not equal".format(k) pass if shapefile is None: return # skip remainder # check that the two shapefiles are the same ra = shp2recarray('{}/mfnwt.shp'.format(tmpdir)) ra6 = shp2recarray('{}/mf6.shp'.format(tmpdir)) # check first and last exported cells assert ra.geometry[0] == ra6.geometry[0] assert ra.geometry[-1] == ra6.geometry[-1] # fields different_fields = list(set(ra.dtype.names).difference(ra6.dtype.names)) different_fields = [f for f in different_fields if 'thick' not in f and 'rech' not in f] assert len(different_fields) == 0 for l in np.arange(m.nlay)+1: assert np.sum(np.abs(ra['rech_{}'.format(l)] - ra6['rechar{}'.format(l)])) < 1e-6 common_fields = set(ra.dtype.names).intersection(ra6.dtype.names) common_fields.remove('geometry') # array values for c in common_fields: for it, it6 in zip(ra[c], ra6[c]): if math.isnan(it): assert math.isnan(it6) else: assert np.abs(it - it6) < 1e-6 pass
def load(f, exe_name='mf88.exe', verbose=False, model_ws='.', forgive=True, lenuni=0): """ Load an existing MODFLOW model. Parameters ---------- f : str Path to MODFLOW script file to load. exe_name : str, optional MODFLOW executable name. Default 'mf2005.exe'. verbose : bool, optional Show messages that can be useful for debugging. Default False. model_ws : str Model workspace path. Default '.' or current directory. forgive : bool, optional Option to raise exceptions on package load failure, which can be useful for debugging. Default False. lenuni : int, str length unit for model. Not in mf88 but useful for exporting Returns ------- ml : Modflow object Examples -------- >>> import mf2web >>> ml = mf2web.mf88.Modflow88.load('model.sh') """ scriptfile_path = os.path.join(model_ws, f) modelname = os.path.splitext(os.path.basename(f))[0] if verbose: print('\nCreating new model with name: {}\n{}\n'.format( modelname, 50 * '-')) ml = Modflow88(modelname, exe_name=exe_name, verbose=verbose, model_ws=model_ws) # create utility to parse the script file! ext_unit_dict = parse_scriptfile(scriptfile_path, model_ws) basfile = ext_unit_dict.pop("BAS") pak = ml.mfnam_packages["BAS"] bas = pak.load(os.path.join(model_ws, basfile.filename), ml, ext_unit_dict=ext_unit_dict) # get active packages! ml.lenuni = lenuni iunit = bas.iunit for pos, unit in enumerate(iunit): if unit > 0: if forgive: try: pak = ml.mfnam_packages[pos] fname = ext_unit_dict.pop(unit) pak.load(os.path.join(model_ws, fname.filename), ml, ext_unit_dict=ext_unit_dict) except Exception as e: print("Package load error: iunit position {}".format( pos + 1)) else: pak = ml.mfnam_packages[pos] if pak is None: print("iunit position not implemented {}".format(pos + 1)) continue fname = ext_unit_dict.pop(unit) pak.load(os.path.join(model_ws, fname.filename), ml, ext_unit_dict=ext_unit_dict) else: pass ml._modelgrid = StructuredGrid(ml.bcf.delc.array, ml.bcf.delr.array, None, None, ml.bas.ibound, ml.bas.lenuni) return ml
def __new__(cls, sr=None, ax=None, model=None, dis=None, layer=0, extent=None, xul=None, yul=None, xll=None, yll=None, rotation=None, length_multiplier=None): from ..utils.reference import SpatialReferenceUnstructured from ..plot.plotbase import DeprecatedMapView err_msg = "ModelMap will be replaced by " \ "PlotMapView(); Calling PlotMapView()" warnings.warn(err_msg, PendingDeprecationWarning) modelgrid = None if model is not None: if (xul, yul, xll, yll, rotation) != (None, None, None, None, None): modelgrid = plotutil._set_coord_info(model.modelgrid, xul, yul, xll, yll, rotation) elif sr is not None: if length_multiplier is not None: sr.length_multiplier = length_multiplier if (xul, yul, xll, yll, rotation) != (None, None, None, None, None): sr.set_spatialreference(xul, yul, xll, yll, rotation) if isinstance(sr, SpatialReferenceUnstructured): if dis is not None: modelgrid = UnstructuredGrid(vertices=sr.verts, iverts=sr.iverts, xcenters=sr.xc, ycenters=sr.yc, top=dis.top.array, botm=dis.botm.array, ncpl=sr.ncpl) else: modelgrid = UnstructuredGrid(vertices=sr.verts, iverts=sr.iverts, xcenters=sr.xc, ycenters=sr.yc, ncpl=sr.ncpl) elif dis is not None: modelgrid = StructuredGrid(delc=sr.delc, delr=sr.delr, top=dis.top.array, botm=dis.botm.array, xoff=sr.xll, yoff=sr.yll, angrot=sr.rotation) else: modelgrid = StructuredGrid(delc=sr.delc, delr=sr.delr, xoff=sr.xll, yoff=sr.yll, angrot=sr.rotation) else: pass return DeprecatedMapView(model=model, modelgrid=modelgrid, ax=ax, layer=layer, extent=extent)