def continue_deploy(self, task, **kwargs): """Method invoked when deployed with the IPA ramdisk. This method is invoked during a heartbeat from an agent when the node is in wait-call-back state. This deploys the image on the node and then configures the node to boot according to the desired boot option (netboot or localboot). :param task: a TaskManager object containing the node. :param kwargs: the kwargs passed from the heartbeat method. :raises: InstanceDeployFailure, if it encounters some error during the deploy. """ node = task.node task.process_event('resume') LOG.debug('Continuing IPA deployment on node %s', node.uuid) is_whole_disk_image = node.driver_internal_info.get( 'is_whole_disk_image') _cleanup_vmedia_boot(task) uuid_dict = iscsi_deploy.do_agent_iscsi_deploy(task, self._client) root_uuid = uuid_dict.get('root uuid') if (iscsi_deploy.get_boot_option(node) == "local" or is_whole_disk_image): efi_system_part_uuid = uuid_dict.get( 'efi system partition uuid') self.configure_local_boot( task, root_uuid=root_uuid, efi_system_part_uuid=efi_system_part_uuid) else: self._configure_vmedia_boot(task, root_uuid) self.reboot_and_finish_deploy(task)
def pass_deploy_info(self, task, **kwargs): """Continues the deployment of baremetal node over iSCSI. This method continues the deployment of the baremetal node over iSCSI from where the deployment ramdisk has left off. :param task: a TaskManager instance containing the node to act on. :param kwargs: kwargs for performing iscsi deployment. :raises: InvalidState """ node = task.node task.process_event('resume') _destroy_token_file(node) is_whole_disk_image = node.driver_internal_info['is_whole_disk_image'] uuid_dict = iscsi_deploy.continue_deploy(task, **kwargs) root_uuid_or_disk_id = uuid_dict.get( 'root uuid', uuid_dict.get('disk identifier')) # save the node's root disk UUID so that another conductor could # rebuild the PXE config file. Due to a shortcoming in Nova objects, # we have to assign to node.driver_internal_info so the node knows it # has changed. driver_internal_info = node.driver_internal_info driver_internal_info['root_uuid_or_disk_id'] = root_uuid_or_disk_id node.driver_internal_info = driver_internal_info node.save() try: if iscsi_deploy.get_boot_option(node) == "local": deploy_utils.try_set_boot_device(task, boot_devices.DISK) # If it's going to boot from the local disk, get rid of # the PXE configuration files used for the deployment pxe_utils.clean_up_pxe_config(task) # Ask the ramdisk to install bootloader and # wait for the call-back through the vendor passthru # 'pass_bootloader_install_info', if it's not a # whole disk image. if not is_whole_disk_image: deploy_utils.notify_ramdisk_to_proceed(kwargs['address']) task.process_event('wait') return else: pxe_config_path = pxe_utils.get_pxe_config_file_path(node.uuid) boot_mode = deploy_utils.get_boot_mode_for_deploy(node) deploy_utils.switch_pxe_config(pxe_config_path, root_uuid_or_disk_id, boot_mode, is_whole_disk_image) except Exception as e: LOG.error(_LE('Deploy failed for instance %(instance)s. ' 'Error: %(error)s'), {'instance': node.instance_uuid, 'error': e}) msg = _('Failed to continue iSCSI deployment.') deploy_utils.set_failed_state(task, msg) else: iscsi_deploy.finish_deploy(task, kwargs.get('address'))
def pass_deploy_info(self, task, **kwargs): """Continues the iSCSI deployment from where ramdisk left off. This method continues the iSCSI deployment from the conductor node and writes the deploy image to the bare metal's disk. After that, it does the following depending on boot_option for deploy: - If the boot_option requested for this deploy is 'local', then it sets the node to boot from disk (ramdisk installs the boot loader present within the image to the bare metal's disk). - If the boot_option requested is 'netboot' or no boot_option is requested, it finds/creates the boot ISO to boot the instance image, attaches the boot ISO to the bare metal and then sets the node to boot from CDROM. :param task: a TaskManager instance containing the node to act on. :param kwargs: kwargs containing parameters for iSCSI deployment. :raises: InvalidState """ node = task.node task.process_event('resume') iwdi = node.driver_internal_info.get('is_whole_disk_image') ilo_common.cleanup_vmedia_boot(task) uuid_dict = iscsi_deploy.continue_deploy(task, **kwargs) root_uuid_or_disk_id = uuid_dict.get( 'root uuid', uuid_dict.get('disk identifier')) try: # Set boot mode ilo_common.update_boot_mode(task) # Need to enable secure boot, if being requested _update_secure_boot_mode(task, True) # For iscsi_ilo driver, we boot from disk every time if the image # deployed is a whole disk image. if iscsi_deploy.get_boot_option(node) == "local" or iwdi: manager_utils.node_set_boot_device(task, boot_devices.DISK, persistent=True) # Ask the ramdisk to install bootloader and # wait for the call-back through the vendor passthru # 'pass_bootloader_install_info', if it's not a whole # disk image. if not iwdi: deploy_utils.notify_ramdisk_to_proceed(kwargs['address']) task.process_event('wait') return else: self._configure_vmedia_boot(task, root_uuid_or_disk_id) except Exception as e: LOG.error(_LE('Deploy failed for instance %(instance)s. ' 'Error: %(error)s'), {'instance': node.instance_uuid, 'error': e}) msg = _('Failed to continue iSCSI deployment.') deploy_utils.set_failed_state(task, msg) else: iscsi_deploy.finish_deploy(task, kwargs.get('address'))
def take_over(self, task): dhcp_opts = pxe_utils.dhcp_options_for_instance(task) provider = dhcp_factory.DHCPFactory() provider.update_dhcp(task, dhcp_opts) if iscsi_deploy.get_boot_option(task.node) == "local": # If it's going to boot from the local disk, we don't need # PXE config files. They still need to be generated as part # of the prepare() because the deployment does PXE boot the # deploy ramdisk pxe_utils.clean_up_pxe_config(task)
def take_over(self, task): if not iscsi_deploy.get_boot_option(task.node) == "local": # If it's going to PXE boot we need to update the DHCP server dhcp_opts = pxe_utils.dhcp_options_for_instance(task) provider = dhcp_factory.DHCPFactory() provider.update_dhcp(task, dhcp_opts) else: # If it's going to boot from the local disk, we don't need # PXE config files. They still need to be generated as part # of the prepare() because the deployment does PXE boot the # deploy ramdisk pxe_utils.clean_up_pxe_config(task)
def _continue_deploy(self, task, **kwargs): """Continues the deployment of baremetal node over iSCSI. This method continues the deployment of the baremetal node over iSCSI from where the deployment ramdisk has left off. :param task: a TaskManager instance containing the node to act on. :param kwargs: kwargs for performing iscsi deployment. :raises: InvalidState """ node = task.node task.process_event('resume') _destroy_token_file(node) root_uuid = iscsi_deploy.continue_deploy(task, **kwargs) if not root_uuid: return # save the node's root disk UUID so that another conductor could # rebuild the PXE config file. Due to a shortcoming in Nova objects, # we have to assign to node.driver_internal_info so the node knows it # has changed. driver_internal_info = node.driver_internal_info driver_internal_info['root_uuid'] = root_uuid node.driver_internal_info = driver_internal_info node.save() try: if iscsi_deploy.get_boot_option(node) == "local": try_set_boot_device(task, boot_devices.DISK) # If it's going to boot from the local disk, get rid of # the PXE configuration files used for the deployment pxe_utils.clean_up_pxe_config(task) else: pxe_config_path = pxe_utils.get_pxe_config_file_path(node.uuid) deploy_utils.switch_pxe_config(pxe_config_path, root_uuid, driver_utils.get_node_capability(node, 'boot_mode')) deploy_utils.notify_deploy_complete(kwargs['address']) LOG.info(_LI('Deployment to node %s done'), node.uuid) task.process_event('done') except Exception as e: LOG.error(_LE('Deploy failed for instance %(instance)s. ' 'Error: %(error)s'), {'instance': node.instance_uuid, 'error': e}) msg = _('Failed to continue iSCSI deployment.') deploy_utils.set_failed_state(task, msg)
def continue_deploy(self, task, **kwargs): """Method invoked when deployed with the IPA ramdisk. This method is invoked during a heartbeat from an agent when the node is in wait-call-back state. This deploys the image on the node and then configures the node to boot according to the desired boot option (netboot or localboot). :param task: a TaskManager object containing the node. :param kwargs: the kwargs passed from the heartbeat method. :raises: InstanceDeployFailure, if it encounters some error during the deploy. """ task.process_event('resume') node = task.node LOG.debug('Continuing the deployment on node %s', node.uuid) # NOTE(lucasagomes): We don't use the token file with the agent, # but as it's created as part of deploy() we are going to remove # it here. _destroy_token_file(node) uuid_dict = iscsi_deploy.do_agent_iscsi_deploy(task, self._client) is_whole_disk_image = node.driver_internal_info['is_whole_disk_image'] if iscsi_deploy.get_boot_option(node) == "local": # Install the boot loader root_uuid = uuid_dict.get('root uuid') efi_sys_uuid = uuid_dict.get('efi system partition uuid') self.configure_local_boot( task, root_uuid=root_uuid, efi_system_part_uuid=efi_sys_uuid) # If it's going to boot from the local disk, get rid of # the PXE configuration files used for the deployment pxe_utils.clean_up_pxe_config(task) else: root_uuid_or_disk_id = uuid_dict.get( 'root uuid', uuid_dict.get('disk identifier')) pxe_config_path = pxe_utils.get_pxe_config_file_path(node.uuid) boot_mode = deploy_utils.get_boot_mode_for_deploy(node) deploy_utils.switch_pxe_config(pxe_config_path, root_uuid_or_disk_id, boot_mode, is_whole_disk_image) self.reboot_and_finish_deploy(task)
def continue_deploy(self, task, **kwargs): """Method invoked when deployed with the IPA ramdisk. This method is invoked during a heartbeat from an agent when the node is in wait-call-back state. This deploys the image on the node and then configures the node to boot according to the desired boot option (netboot or localboot). :param task: a TaskManager object containing the node. :param kwargs: the kwargs passed from the heartbeat method. :raises: InstanceDeployFailure, if it encounters some error during the deploy. """ task.process_event('resume') node = task.node LOG.debug('Continuing the deployment on node %s', node.uuid) # NOTE(lucasagomes): We don't use the token file with the agent, # but as it's created as part of deploy() we are going to remove # it here. _destroy_token_file(node) uuid_dict = iscsi_deploy.do_agent_iscsi_deploy(task, self._client) is_whole_disk_image = node.driver_internal_info['is_whole_disk_image'] if iscsi_deploy.get_boot_option(node) == "local": # Install the boot loader root_uuid = uuid_dict.get('root uuid') efi_sys_uuid = uuid_dict.get('efi system partition uuid') self.configure_local_boot(task, root_uuid=root_uuid, efi_system_part_uuid=efi_sys_uuid) # If it's going to boot from the local disk, get rid of # the PXE configuration files used for the deployment pxe_utils.clean_up_pxe_config(task) else: root_uuid_or_disk_id = uuid_dict.get( 'root uuid', uuid_dict.get('disk identifier')) pxe_config_path = pxe_utils.get_pxe_config_file_path(node.uuid) boot_mode = deploy_utils.get_boot_mode_for_deploy(node) deploy_utils.switch_pxe_config(pxe_config_path, root_uuid_or_disk_id, boot_mode, is_whole_disk_image) self.reboot_and_finish_deploy(task)
def continue_deploy(self, task, **kwargs): """Method invoked when deployed with the IPA ramdisk. This method is invoked during a heartbeat from an agent when the node is in wait-call-back state. This deploys the image on the node and then configures the node to boot according to the desired boot option (netboot or localboot). :param task: a TaskManager object containing the node. :param kwargs: the kwargs passed from the heartbeat method. :raises: InstanceDeployFailure, if it encounters some error during the deploy. """ task.process_event('resume') node = task.node LOG.debug('Continuing the deployment on node %s', node.uuid) ilo_common.cleanup_vmedia_boot(task) iwdi = node.driver_internal_info.get('is_whole_disk_image') uuid_dict = iscsi_deploy.do_agent_iscsi_deploy(task, self._client) root_uuid = uuid_dict.get('root uuid') if iscsi_deploy.get_boot_option(node) == "local" or iwdi: efi_system_part_uuid = uuid_dict.get( 'efi system partition uuid') self.configure_local_boot( task, root_uuid=root_uuid, efi_system_part_uuid=efi_system_part_uuid) else: # Agent vendorpassthru are made without auth token. # We require auth_token to talk to glance while building boot iso. task.context.auth_token = keystone.get_admin_auth_token() self._configure_vmedia_boot(task, root_uuid) # Set boot mode ilo_common.update_boot_mode(task) # Need to enable secure boot, if being requested _update_secure_boot_mode(task, True) self.reboot_and_finish_deploy(task)
def continue_deploy(self, task, **kwargs): """Method invoked when deployed with the IPA ramdisk. This method is invoked during a heartbeat from an agent when the node is in wait-call-back state. This deploys the image on the node and then configures the node to boot according to the desired boot option (netboot or localboot). :param task: a TaskManager object containing the node. :param kwargs: the kwargs passed from the heartbeat method. :raises: InstanceDeployFailure, if it encounters some error during the deploy. """ task.process_event("resume") node = task.node LOG.debug("Continuing the deployment on node %s", node.uuid) uuid_dict = iscsi_deploy.do_agent_iscsi_deploy(task, self._client) is_whole_disk_image = node.driver_internal_info["is_whole_disk_image"] if iscsi_deploy.get_boot_option(node) == "local": # Install the boot loader root_uuid = uuid_dict.get("root uuid") efi_sys_uuid = uuid_dict.get("efi system partition uuid") self.configure_local_boot(task, root_uuid=root_uuid, efi_system_part_uuid=efi_sys_uuid) # If it's going to boot from the local disk, get rid of # the PXE configuration files used for the deployment pxe_utils.clean_up_pxe_config(task) else: root_uuid_or_disk_id = uuid_dict.get("root uuid", uuid_dict.get("disk identifier")) pxe_config_path = pxe_utils.get_pxe_config_file_path(node.uuid) boot_mode = deploy_utils.get_boot_mode_for_deploy(node) deploy_utils.switch_pxe_config( pxe_config_path, root_uuid_or_disk_id, boot_mode, is_whole_disk_image, deploy_utils.is_trusted_boot_requested(node), ) self.reboot_and_finish_deploy(task)
def continue_deploy(self, task, **kwargs): """Method invoked when deployed with the IPA ramdisk. This method is invoked during a heartbeat from an agent when the node is in wait-call-back state. This deploys the image on the node and then configures the node to boot according to the desired boot option (netboot or localboot). :param task: a TaskManager object containing the node. :param kwargs: the kwargs passed from the heartbeat method. :raises: InstanceDeployFailure, if it encounters some error during the deploy. """ task.process_event('resume') node = task.node LOG.debug('Continuing the deployment on node %s', node.uuid) ilo_common.cleanup_vmedia_boot(task) iwdi = node.driver_internal_info.get('is_whole_disk_image') uuid_dict = iscsi_deploy.do_agent_iscsi_deploy(task, self._client) root_uuid = uuid_dict.get('root uuid') if iscsi_deploy.get_boot_option(node) == "local" or iwdi: efi_system_part_uuid = uuid_dict.get('efi system partition uuid') self.configure_local_boot( task, root_uuid=root_uuid, efi_system_part_uuid=efi_system_part_uuid) else: # Agent vendorpassthru are made without auth token. # We require auth_token to talk to glance while building boot iso. task.context.auth_token = keystone.get_admin_auth_token() self._configure_vmedia_boot(task, root_uuid) # Set boot mode ilo_common.update_boot_mode(task) # Need to enable secure boot, if being requested _update_secure_boot_mode(task, True) self.reboot_and_finish_deploy(task)
def validate_boot_parameters_for_trusted_boot(node): """Check if boot parameters are valid for trusted boot.""" boot_mode = deploy_utils.get_boot_mode_for_deploy(node) boot_option = iscsi_deploy.get_boot_option(node) is_whole_disk_image = node.driver_internal_info.get('is_whole_disk_image') # 'is_whole_disk_image' is not supported by trusted boot, because there is # no Kernel/Ramdisk to measure at all. if (boot_mode != 'bios' or is_whole_disk_image or boot_option != 'netboot'): msg = (_("Trusted boot is only supported in BIOS boot mode with " "netboot and without whole_disk_image, but Node " "%(node_uuid)s was configured with boot_mode: %(boot_mode)s, " "boot_option: %(boot_option)s, is_whole_disk_image: " "%(is_whole_disk_image)s: at least one of them is wrong, and " "this can be caused by enable secure boot.") % {'node_uuid': node.uuid, 'boot_mode': boot_mode, 'boot_option': boot_option, 'is_whole_disk_image': is_whole_disk_image}) LOG.error(msg) raise exception.InvalidParameterValue(msg)
def _continue_deploy(self, task, **kwargs): """Continues the deployment of baremetal node over iSCSI. This method continues the deployment of the baremetal node over iSCSI from where the deployment ramdisk has left off. :param task: a TaskManager instance containing the node to act on. :param kwargs: kwargs for performing iscsi deployment. :raises: InvalidState """ node = task.node task.process_event('resume') _destroy_token_file(node) root_uuid = iscsi_deploy.continue_deploy(task, **kwargs) if not root_uuid: return try: if iscsi_deploy.get_boot_option(node) == "local": try_set_boot_device(task, boot_devices.DISK) # If it's going to boot from the local disk, get rid of # the PXE configuration files used for the deployment pxe_utils.clean_up_pxe_config(task) else: pxe_config_path = pxe_utils.get_pxe_config_file_path(node.uuid) deploy_utils.switch_pxe_config(pxe_config_path, root_uuid, driver_utils.get_node_capability(node, 'boot_mode')) deploy_utils.notify_deploy_complete(kwargs['address']) LOG.info(_LI('Deployment to node %s done'), node.uuid) task.process_event('done') except Exception as e: LOG.error(_LE('Deploy failed for instance %(instance)s. ' 'Error: %(error)s'), {'instance': node.instance_uuid, 'error': e}) msg = _('Failed to continue iSCSI deployment.') deploy_utils.set_failed_state(task, msg)
def validate_boot_parameters_for_trusted_boot(node): """Check if boot parameters are valid for trusted boot.""" boot_mode = deploy_utils.get_boot_mode_for_deploy(node) boot_option = iscsi_deploy.get_boot_option(node) is_whole_disk_image = node.driver_internal_info.get('is_whole_disk_image') # 'is_whole_disk_image' is not supported by trusted boot, because there is # no Kernel/Ramdisk to measure at all. if (boot_mode != 'bios' or is_whole_disk_image or boot_option != 'netboot'): msg = (_("Trusted boot is only supported in BIOS boot mode with " "netboot and without whole_disk_image, but Node " "%(node_uuid)s was configured with boot_mode: %(boot_mode)s, " "boot_option: %(boot_option)s, is_whole_disk_image: " "%(is_whole_disk_image)s: at least one of them is wrong, and " "this can be caused by enable secure boot.") % { 'node_uuid': node.uuid, 'boot_mode': boot_mode, 'boot_option': boot_option, 'is_whole_disk_image': is_whole_disk_image }) LOG.error(msg) raise exception.InvalidParameterValue(msg)
def validate_boot_option_for_uefi(node): """In uefi boot mode, validate if the boot option is compatible. This method raises exception if whole disk image being deployed in UEFI boot mode without 'boot_option' being set to 'local'. :param node: a single Node. :raises: InvalidParameterValue """ boot_mode = deploy_utils.get_boot_mode_for_deploy(node) boot_option = iscsi_deploy.get_boot_option(node) if (boot_mode == 'uefi' and node.driver_internal_info.get('is_whole_disk_image') and boot_option != 'local'): LOG.error(_LE("Whole disk image with netboot is not supported in UEFI " "boot mode.")) raise exception.InvalidParameterValue(_( "Conflict: Whole disk image being used for deploy, but " "cannot be used with node %(node_uuid)s configured to use " "UEFI boot with netboot option") % {'node_uuid': node.uuid})
def validate_boot_option_for_uefi(node): """In uefi boot mode, validate if the boot option is compatible. This method raises exception if whole disk image being deployed in UEFI boot mode without 'boot_option' being set to 'local'. :param node: a single Node. :raises: InvalidParameterValue """ boot_mode = deploy_utils.get_boot_mode_for_deploy(node) boot_option = iscsi_deploy.get_boot_option(node) if (boot_mode == 'uefi' and node.driver_internal_info.get('is_whole_disk_image') and boot_option != 'local'): LOG.error( _LE("Whole disk image with netboot is not supported in UEFI " "boot mode.")) raise exception.InvalidParameterValue( _("Conflict: Whole disk image being used for deploy, but " "cannot be used with node %(node_uuid)s configured to use " "UEFI boot with netboot option") % {'node_uuid': node.uuid})
def test_get_boot_option_default_value(self): self.node.instance_info = {} result = iscsi_deploy.get_boot_option(self.node) self.assertEqual("netboot", result)
def test_get_boot_option(self): self.node.instance_info = {'capabilities': '{"boot_option": "local"}'} result = iscsi_deploy.get_boot_option(self.node) self.assertEqual("local", result)
def pass_deploy_info(self, task, **kwargs): """Continues the iSCSI deployment from where ramdisk left off. This method continues the iSCSI deployment from the conductor node and writes the deploy image to the bare metal's disk. After that, it does the following depending on boot_option for deploy: - If the boot_option requested for this deploy is 'local', then it sets the node to boot from disk (ramdisk installs the boot loader present within the image to the bare metal's disk). - If the boot_option requested is 'netboot' or no boot_option is requested, it finds/creates the boot ISO to boot the instance image, attaches the boot ISO to the bare metal and then sets the node to boot from CDROM. :param task: a TaskManager instance containing the node to act on. :param kwargs: kwargs containing parameters for iSCSI deployment. :raises: InvalidState """ node = task.node task.process_event('resume') iwdi = node.driver_internal_info.get('is_whole_disk_image') ilo_common.cleanup_vmedia_boot(task) uuid_dict = iscsi_deploy.continue_deploy(task, **kwargs) root_uuid_or_disk_id = uuid_dict.get('root uuid', uuid_dict.get('disk identifier')) try: # Set boot mode ilo_common.update_boot_mode(task) # Need to enable secure boot, if being requested _update_secure_boot_mode(task, True) # For iscsi_ilo driver, we boot from disk every time if the image # deployed is a whole disk image. if iscsi_deploy.get_boot_option(node) == "local" or iwdi: manager_utils.node_set_boot_device(task, boot_devices.DISK, persistent=True) # Ask the ramdisk to install bootloader and # wait for the call-back through the vendor passthru # 'pass_bootloader_install_info', if it's not a whole # disk image. if not iwdi: deploy_utils.notify_ramdisk_to_proceed(kwargs['address']) task.process_event('wait') return else: self._configure_vmedia_boot(task, root_uuid_or_disk_id) except Exception as e: LOG.error( _LE('Deploy failed for instance %(instance)s. ' 'Error: %(error)s'), { 'instance': node.instance_uuid, 'error': e }) msg = _('Failed to continue iSCSI deployment.') deploy_utils.set_failed_state(task, msg) else: iscsi_deploy.finish_deploy(task, kwargs.get('address'))
def continue_deploy(self, task, **kwargs): if iscsi_deploy.get_boot_option(task.node) == "netboot": task.driver.management.ensure_next_boot_device(task.node, boot_devices.PXE) super(AMTPXEVendorPassthru, self).continue_deploy(task, **kwargs)
def pass_deploy_info(self, task, **kwargs): """Continues the deployment of baremetal node over iSCSI. This method continues the deployment of the baremetal node over iSCSI from where the deployment ramdisk has left off. :param task: a TaskManager instance containing the node to act on. :param kwargs: kwargs for performing iscsi deployment. :raises: InvalidState """ node = task.node task.process_event('resume') LOG.debug('Continuing the deployment on node %s', node.uuid) _destroy_token_file(node) is_whole_disk_image = node.driver_internal_info['is_whole_disk_image'] uuid_dict = iscsi_deploy.continue_deploy(task, **kwargs) root_uuid_or_disk_id = uuid_dict.get('root uuid', uuid_dict.get('disk identifier')) # save the node's root disk UUID so that another conductor could # rebuild the PXE config file. Due to a shortcoming in Nova objects, # we have to assign to node.driver_internal_info so the node knows it # has changed. driver_internal_info = node.driver_internal_info driver_internal_info['root_uuid_or_disk_id'] = root_uuid_or_disk_id node.driver_internal_info = driver_internal_info node.save() try: if iscsi_deploy.get_boot_option(node) == "local": deploy_utils.try_set_boot_device(task, boot_devices.DISK) # If it's going to boot from the local disk, get rid of # the PXE configuration files used for the deployment pxe_utils.clean_up_pxe_config(task) # Ask the ramdisk to install bootloader and # wait for the call-back through the vendor passthru # 'pass_bootloader_install_info', if it's not a # whole disk image. if not is_whole_disk_image: LOG.debug('Installing the bootloader on node %s', node.uuid) deploy_utils.notify_ramdisk_to_proceed(kwargs['address']) task.process_event('wait') return else: pxe_config_path = pxe_utils.get_pxe_config_file_path(node.uuid) boot_mode = deploy_utils.get_boot_mode_for_deploy(node) deploy_utils.switch_pxe_config(pxe_config_path, root_uuid_or_disk_id, boot_mode, is_whole_disk_image) except Exception as e: LOG.error( _LE('Deploy failed for instance %(instance)s. ' 'Error: %(error)s'), { 'instance': node.instance_uuid, 'error': e }) msg = _('Failed to continue iSCSI deployment.') deploy_utils.set_failed_state(task, msg) else: iscsi_deploy.finish_deploy(task, kwargs.get('address'))
def continue_deploy(self, task, **kwargs): if iscsi_deploy.get_boot_option(task.node) == "netboot": task.driver.management.ensure_next_boot_device( task.node, boot_devices.PXE) super(AMTPXEVendorPassthru, self).continue_deploy(task, **kwargs)