示例#1
0
    def test_ATR5(self):
        atr = [
            0x3B, 0xE3, 0x00, 0xFF, 0x81, 0x31, 0x52, 0x45, 0xA1, 0xA2, 0xA3,
            0x1B
        ]
        data_out = """TB1: 0
TC1: ff
TD1: 81
TD2: 31
TA3: 52
TB3: 45
supported protocols T=1
T=0 supported: False
T=1 supported: True
checksum: 27
	clock rate conversion factor: 372
	bit rate adjustment factor: 1
	maximum programming current: 25
	programming voltage: 5
	guard time: 255
nb of interface bytes: 6
nb of historical bytes: 3
"""
        a = ATR(atr)
        a.dump()
        output = sys.stdout.getvalue()
        self.assertEqual(output, data_out)
示例#2
0
    def test_ATR5(self):
        atr = [0x3B, 0xE3, 0x00, 0xFF, 0x81, 0x31, 0x52, 0x45, 0xA1,
               0xA2, 0xA3, 0x1B]
        data_out = """TB1: 0
TC1: ff
TD1: 81
TD2: 31
TA3: 52
TB3: 45
supported protocols T=1
T=0 supported: False
T=1 supported: True
checksum: 27
	clock rate conversion factor: 372
	bit rate adjustment factor: 1
	maximum programming current: 25
	programming voltage: 5
	guard time: 255
nb of interface bytes: 6
nb of historical bytes: 3
"""
        a = ATR(atr)
        a.dump()
        output = sys.stdout.getvalue()
        self.assertEqual(output, data_out)
示例#3
0
文件: atr.py 项目: wanggh1021/KITT
    def update(self, observable, actions):
        try:
            readers = self._list()
            self.reader_name = readers[0]
        except:
            print_error("Error retreiving the reader")
        try:
            (addedcards, removedcards) = actions
            for card in addedcards:
                print_info(f"Reader 0: {self.reader_name}")
                print_ok_raw(f"Card State: Card inserted")
                print("ATR: ", toHexString(card.atr))

                atr = ATR(card.atr)
                if (self.verbose):
                    atr.dump()

                print()
                print_info(
                    "Possible identified card (using _smartcard_list.txt)")
                self.search_in_txt('utildata/_smartcard_list.txt',
                                   toHexString(card.atr))
            for card in removedcards:
                print_info(f"Reader 0: {self.reader_name}")
                print_error_raw(f"Card State: Card removed")
                print("ATR: ", toHexString(card.atr))
        except Exception as e:
            pass
示例#4
0
    def test_ATR6(self):
        atr = [
            0x3B, 0xE5, 0x00, 0x00, 0x81, 0x21, 0x45, 0x9C, 0x10, 0x01, 0x00,
            0x80, 0x0D
        ]
        data_out = """TB1: 0
TC1: 0
TD1: 81
TD2: 21
TB3: 45
supported protocols T=1
T=0 supported: False
T=1 supported: True
checksum: 13
	clock rate conversion factor: 372
	bit rate adjustment factor: 1
	maximum programming current: 25
	programming voltage: 5
	guard time: 0
nb of interface bytes: 5
nb of historical bytes: 5
"""
        a = ATR(atr)
        a.dump()
        output = sys.stdout.getvalue()
        self.assertEqual(output, data_out)
示例#5
0
 def info(self):
     """print the type of the card on the reader"""
     atr = ATR(self.connection.getATR())
     historical_byte = toHexString(atr.getHistoricalBytes(), 0)
     print(historical_byte)
     print(historical_byte[-17:-12])
     card_name = historical_byte[-17:-12]
     name = option.cards.get(card_name, "")
     print(
         f"Card Name: {name}\n\tT0 {atr.isT0Supported()}\n\tT1 {atr.isT1Supported()}\n\tT1 {atr.isT15Supported()}"
     )
示例#6
0
def printATR(bytes):
    if bytes == None or not isinstance(bytes, list) or len(bytes) < 1:
        Executer.printOnShell("The value is not a valid ATR")
        return

    atr = ATR(bytes)

    print atr
    print
    atr.dump()
    print 'T15 supported: ', atr.isT15Supported()
示例#7
0
def printATR(bytes):
    if bytes == None or not isinstance(bytes,list) or len(bytes) < 1:
        Executer.printOnShell("The value is not a valid ATR")
        return
    
    atr = ATR(bytes)
    
    print atr
    print
    atr.dump()
    print 'T15 supported: ', atr.isT15Supported()
示例#8
0
def printAtr(bytes):
    "convert a string of bytes into a human readable comprehension of the ATR"
    if bytes is None or not isinstance(bytes, list) or len(bytes) < 1:
        printShell("The value is not a valid ATR")
        return

    atr = ATR(bytes)

    # use of this critical section because dump produce some print
    # without control
    with Printer.getInstance():
        printShell(str(atr) + "\n")
        atr.dump()
        printShell('T15 supported: ', atr.isT15Supported())
示例#9
0
def printAtr(bytes):
    "convert a string of bytes into a human readable comprehension of the ATR"
    if bytes is None or not isinstance(bytes, list) or len(bytes) < 1:
        printShell("The value is not a valid ATR")
        return

    atr = ATR(bytes)

    # use of this critical section because dump produce some print
    # without control
    with Printer.getInstance():
        printShell(str(atr) + "\n")
        atr.dump()
        printShell('T15 supported: ', atr.isT15Supported())
示例#10
0
 def testcase_ATR7(self):
     """Protect V3 T=1"""
     a = ATR([0x3B, 0xE5, 0x00, 0x00, 0x81, 0x21, 0x45, 0x9C, 0x10,
         0x01, 0x00, 0x80, 0x0D])
     historicalbytes = [0x9C, 0x10, 0x01, 0x00, 0x80]
     self.assertEqual(a.getHistoricalBytes(), historicalbytes)
     self.assertEqual(a.getChecksum(), 0x0D)
     self.assertTrue(not a.isT0Supported())
     self.assertTrue(a.isT1Supported())
     self.assertTrue(not a.isT15Supported())
     self.assertTrue(a.checksumOK)
     self.assertTrue(a.getTB1() == 0x00)
     self.assertTrue(a.getTC1() == 0x00)
     self.assertTrue(a.getTD1() == 0x81)
     self.assertTrue(a.TD[2 - 1] == 0x21)  # TD2
     self.assertTrue(a.TB[3 - 1] == 0x45)  # TB3
示例#11
0
文件: rfid.py 项目: Tubbz-alt/RFUID
    def open(self):
        PcscReader.open(self)

        # We could pass this into connect, but this is clearer
        self.atr = ATR(self.conn.getATR())
        if DEBUG:
            print('ATR: %s' % self.atr)
            self.atr.dump()

        if not self.atr.isT0Supported():
            self.close()
            raise CardConnectionException('Reader reports T0 protocol not supported')

        if DEBUG:
            print('Firmware version %s' % self.firmware_version())

        self.pn532.set_retries(0, 0, 0)
示例#12
0
 def test_ATR_get(self):
     atr = "3B F2 95 12 34 01 36 06"
     a = ATR(toBytes(atr))
     self.assertEqual(a.getTA1(), 0x95)
     self.assertEqual(a.getTB1(), 0x12)
     self.assertEqual(a.getTC1(), 0x34)
     self.assertEqual(a.getTD1(), 0x01)
     self.assertEqual(a.getHistoricalBytes(), [0x36, 0x06])
     self.assertFalse(a.isT15Supported())
     self.assertEqual(str(a), atr)
示例#13
0
    def test_ATR3(self):
        atr = [0x3B, 0x16, 0x94, 0x7C, 0x03, 0x01, 0x00, 0x00, 0x0D]
        data_out = """TA1: 94
supported protocols T=0
T=0 supported: True
T=1 supported: False
	clock rate conversion factor: 512
	bit rate adjustment factor: 8
	maximum programming current: 50
	programming voltage: 5
	guard time: None
nb of interface bytes: 1
nb of historical bytes: 6
"""
        a = ATR(atr)
        a.dump()
        output = sys.stdout.getvalue()
        self.assertEqual(output, data_out)
示例#14
0
def parseCard(connection):
    card = {}
    if "ATR" in plugin.getInterpretersTable():
        card["ATR"] = plugin.getInterpretersTable()["ATR"](ATR(getATR(connection)))
    else:
        card["ATR"] = toHexString(getATR(connection))
    card["Content"] = parseCardStruct(connection, plugin.getRootStructure())
    card["Keys"] = ["ATR", "Content"]
    return card
示例#15
0
    def test_ATR3(self):
        atr = [0x3B, 0x16, 0x94, 0x7C, 0x03, 0x01, 0x00, 0x00, 0x0D]
        data_out = """TA1: 94
supported protocols T=0
T=0 supported: True
T=1 supported: False
	clock rate conversion factor: 512
	bit rate adjustment factor: 8
	maximum programming current: 50
	programming voltage: 5
	guard time: None
nb of interface bytes: 1
nb of historical bytes: 6
"""
        a = ATR(atr)
        a.dump()
        output = sys.stdout.getvalue()
        self.assertEqual(output, data_out)
示例#16
0
    def test_ATR2(self):
        atr = [0x3F, 0x65, 0x25, 0x08, 0x93, 0x04, 0x6C, 0x90, 0x00]
        data_out = """TB1: 25
TC1: 8
supported protocols T=0
T=0 supported: True
T=1 supported: False
	clock rate conversion factor: 372
	bit rate adjustment factor: 1
	maximum programming current: 50
	programming voltage: 30
	guard time: 8
nb of interface bytes: 2
nb of historical bytes: 5
"""
        a = ATR(atr)
        a.dump()
        output = sys.stdout.getvalue()
        self.assertEqual(output, data_out)
示例#17
0
    def test_ATR4(self):
        atr = [0x3B, 0x65, 0x00, 0x00, 0x9C, 0x11, 0x01, 0x01, 0x03]
        data_out = """TB1: 0
TC1: 0
supported protocols T=0
T=0 supported: True
T=1 supported: False
	clock rate conversion factor: 372
	bit rate adjustment factor: 1
	maximum programming current: 25
	programming voltage: 5
	guard time: 0
nb of interface bytes: 2
nb of historical bytes: 5
"""
        a = ATR(atr)
        a.dump()
        output = sys.stdout.getvalue()
        self.assertEqual(output, data_out)
示例#18
0
    def test_ATR4(self):
        atr = [0x3B, 0x65, 0x00, 0x00, 0x9C, 0x11, 0x01, 0x01, 0x03]
        data_out = """TB1: 0
TC1: 0
supported protocols T=0
T=0 supported: True
T=1 supported: False
	clock rate conversion factor: 372
	bit rate adjustment factor: 1
	maximum programming current: 25
	programming voltage: 5
	guard time: 0
nb of interface bytes: 2
nb of historical bytes: 5
"""
        a = ATR(atr)
        a.dump()
        output = sys.stdout.getvalue()
        self.assertEqual(output, data_out)
示例#19
0
    def test_ATR2(self):
        atr = [0x3F, 0x65, 0x25, 0x08, 0x93, 0x04, 0x6C, 0x90, 0x00]
        data_out = """TB1: 25
TC1: 8
supported protocols T=0
T=0 supported: True
T=1 supported: False
	clock rate conversion factor: 372
	bit rate adjustment factor: 1
	maximum programming current: 50
	programming voltage: 30
	guard time: 8
nb of interface bytes: 2
nb of historical bytes: 5
"""
        a = ATR(atr)
        a.dump()
        output = sys.stdout.getvalue()
        self.assertEqual(output, data_out)
示例#20
0
 def testcase_ATR7(self):
     """Protect V3 T=1"""
     a = ATR([0x3B, 0xE5, 0x00, 0x00, 0x81, 0x21, 0x45, 0x9C, 0x10,
         0x01, 0x00, 0x80, 0x0D])
     historicalbytes = [0x9C, 0x10, 0x01, 0x00, 0x80]
     self.assertEquals(a.getHistoricalBytes(), historicalbytes)
     self.assertEquals(a.getChecksum(), 0x0D)
     self.assert_(not a.isT0Supported())
     self.assert_(a.isT1Supported())
     self.assert_(not a.isT15Supported())
     self.assert_(a.checksumOK)
     self.assert_(a.getTB1() == 0x00)
     self.assert_(a.getTC1() == 0x00)
     self.assert_(a.getTD1() == 0x81)
     self.assert_(a.TD[2 - 1] == 0x21) # TD2
     self.assert_(a.TB[3 - 1] == 0x45) # TB3
示例#21
0
 def testcase_ATR2(self):
     """Palmera Protect V2."""
     a = ATR([0x3B, 0x65, 0x00, 0x00, 0x9C, 0x02, 0x02, 0x01, 0x02])
     historicalbytes = [0x9C, 0x02, 0x02, 0x01, 0x02]
     self.assertEqual(a.getHistoricalBytes(), historicalbytes)
     self.assertEqual(a.getChecksum(), None)
     self.assertTrue(a.isT0Supported())
     self.assertTrue(not a.isT1Supported())
     self.assertTrue(not a.isT15Supported())
示例#22
0
 def testcase_ATR3(self):
     """Simera 3.13."""
     a = ATR([0x3B, 0x16, 0x18, 0x20, 0x02, 0x01, 0x00, 0x80, 0x0D])
     historicalbytes = [0x20, 0x02, 0x01, 0x00, 0x80, 0x0D]
     self.assertEqual(a.getHistoricalBytes(), historicalbytes)
     self.assertEqual(a.getChecksum(), None)
     self.assertTrue(a.isT0Supported())
     self.assertTrue(not a.isT1Supported())
     self.assertTrue(not a.isT15Supported())
示例#23
0
 def testcase_ATR5(self):
     """Demo Vitale online IGEA340"""
     a = ATR([0x3F, 0x65, 0x25, 0x00, 0x52, 0x09, 0x6A, 0x90, 0x00])
     historicalbytes = [0x52, 0x09, 0x6A, 0x90, 0x00]
     self.assertEqual(a.getHistoricalBytes(), historicalbytes)
     self.assertEqual(a.getChecksum(), None)
     self.assertTrue(a.isT0Supported())
     self.assertTrue(not a.isT1Supported())
     self.assertTrue(not a.isT15Supported())
示例#24
0
def request_any_card(cardtype):
    cardrequest = CardRequest(timeout=10, cardType=cardtype)
    cardservice = cardrequest.waitforcard()

    cardservice.connection.connect()

    atr = ATR(cardservice.connection.getATR())
    atr_hex = toHexString(cardservice.connection.getATR())

    # print_atr_info(atr)
    return atr_hex, atr
示例#25
0
 def test_ATR_get(self):
     atr = "3B F2 95 12 34 01 36 06"
     a = ATR(toBytes(atr))
     self.assertEqual(a.getTA1(), 0x95)
     self.assertEqual(a.getTB1(), 0x12)
     self.assertEqual(a.getTC1(), 0x34)
     self.assertEqual(a.getTD1(), 0x01)
     self.assertEqual(a.getHistoricalBytes(), [0x36, 0x06])
     self.assertFalse(a.isT15Supported())
     self.assertEqual(str(a), atr)
示例#26
0
 def testcase_ATR4(self):
     """SIMRock'n Tree"""
     a = ATR([0x3B, 0x77, 0x94, 0x00, 0x00, 0x82, 0x30, 0x00, 0x13,
         0x6C, 0x9F, 0x22])
     historicalbytes = [0x82, 0x30, 0x00, 0x13, 0x6C, 0x9F, 0x22]
     self.assertEqual(a.getHistoricalBytes(), historicalbytes)
     self.assertEqual(a.getChecksum(), None)
     self.assertTrue(a.isT0Supported())
     self.assertTrue(not a.isT1Supported())
     self.assertTrue(not a.isT15Supported())
示例#27
0
文件: rfid.py 项目: Tubbz-alt/RFUID
    def open(self):
        PcscReader.open(self)

        # We could pass this into connect, but this is clearer
        self.atr = ATR(self.conn.getATR())
        if DEBUG:
            print('ATR: %s' % self.atr)
            try:
                self.atr.dump()
            except TypeError as e:
                print('Exception %r dumping ATR' % e)

        if self.atr.isT1Supported():
            # will raise NoCardException if no card is present
            resp, sw1, sw2 = self.send_to_tag(None, APDU(0xff, 0xca), protocol=smartcard.scard.SCARD_PROTOCOL_T1)
            uid = ''.join('%02x' % ord(c) for c in resp)
        else:
            uid = None

        self.tag = Tag(self, None, None, None)
        self.tag.uid = uid
        self.tag.ats = self.atr.bytes
示例#28
0
文件: rfid.py 项目: Tubbz-alt/RFUID
class BasicChipReader(PcscReader):
    def open(self):
        PcscReader.open(self)

        # We could pass this into connect, but this is clearer
        self.atr = ATR(self.conn.getATR())
        if DEBUG:
            print('ATR: %s' % self.atr)
            try:
                self.atr.dump()
            except TypeError as e:
                print('Exception %r dumping ATR' % e)

        if self.atr.isT1Supported():
            # will raise NoCardException if no card is present
            resp, sw1, sw2 = self.send_to_tag(None, APDU(0xff, 0xca), protocol=smartcard.scard.SCARD_PROTOCOL_T1)
            uid = ''.join('%02x' % ord(c) for c in resp)
        else:
            uid = None

        self.tag = Tag(self, None, None, None)
        self.tag.uid = uid
        self.tag.ats = self.atr.bytes

    @property
    def tags(self):
        return [self.tag]

    def send_to_tag(self, tag, apdu):
        if tag is not None:
            raise ValueError('Multiple tags not supported')

        resp, sw1, sw2 = self.conn.transmit(list(apdu))
        if sw1 == 0x61:  # More data
            apdu2 = APDU(0, 0xc0, lc=sw2)
            resp, sw1, sw2 = self.conn.transmit(list(apdu2))

        return [sw1, sw2] + resp
示例#29
0
文件: rfid.py 项目: marksteward/RFUID
class BasicChipReader(PcscReader):
    def open(self):
        PcscReader.open(self)

        # We could pass this into connect, but this is clearer
        self.atr = ATR(self.conn.getATR())
        if DEBUG:
            print 'ATR: %s' % self.atr
            try:
                self.atr.dump()
            except TypeError as e:
                print 'Exception %r dumping ATR' % e

        if self.atr.isT1Supported():
            # will raise NoCardException if no card is present
            resp, sw1, sw2 = self.send_to_tag(None, APDU(0xff, 0xca), protocol=smartcard.scard.SCARD_PROTOCOL_T1)
            uid = ''.join('%02x' % ord(c) for c in resp)
        else:
            uid = None

        self.tag = Tag(self, None, None, None)
        self.tag.uid = uid
        self.tag.ats = self.atr.bytes

    @property
    def tags(self):
        return [self.tag]

    def send_to_tag(self, tag, apdu):
        if tag is not None:
            raise ValueError('Multiple tags not supported')

        resp, sw1, sw2 = self.conn.transmit(list(apdu))
        if sw1 == 0x61:  # More data
            apdu2 = APDU(0, 0xc0, lc=sw2)
            resp, sw1, sw2 = self.conn.transmit(list(apdu2))

        return [sw1, sw2] + resp
示例#30
0
 def testcase_ATR1(self):
     """Usimera Classic 2."""
     a = ATR([0x3B, 0x9E, 0x95, 0x80, 0x1F, 0xC3, 0x80, 0x31, 0xA0, 0x73,
         0xBE, 0x21, 0x13, 0x67, 0x29, 0x02, 0x01, 0x01, 0x81, 0xCD, 0xB9])
     historicalbytes = [0x80, 0x31, 0xA0, 0x73, 0xBE, 0x21, 0x13, 0x67,
         0x29, 0x02, 0x01, 0x01, 0x81, 0xCD]
     self.assertEqual(a.getHistoricalBytes(), historicalbytes)
     self.assertEqual(a.getChecksum(), 0xB9)
     self.assertTrue(a.checksumOK)
     self.assertTrue(a.isT0Supported())
     self.assertTrue(not a.isT1Supported())
     self.assertTrue(a.isT15Supported())
示例#31
0
 def testcase_ATR5(self):
     """Demo Vitale online IGEA340"""
     a = ATR([0x3F, 0x65, 0x25, 0x00, 0x52, 0x09, 0x6A, 0x90, 0x00])
     historicalbytes = [0x52, 0x09, 0x6A, 0x90, 0x00]
     self.assertEquals(a.getHistoricalBytes(), historicalbytes)
     self.assertEquals(a.getChecksum(), None)
     self.assert_(a.isT0Supported())
     self.assert_(not a.isT1Supported())
     self.assert_(not a.isT15Supported())
示例#32
0
 def testcase_ATR2(self):
     """Palmera Protect V2."""
     a = ATR([0x3B, 0x65, 0x00, 0x00, 0x9C, 0x02, 0x02, 0x01, 0x02])
     historicalbytes = [0x9C, 0x02, 0x02, 0x01, 0x02]
     self.assertEquals(a.getHistoricalBytes(), historicalbytes)
     self.assertEquals(a.getChecksum(), None)
     self.assert_(a.isT0Supported())
     self.assert_(not a.isT1Supported())
     self.assert_(not a.isT15Supported())
示例#33
0
 def testcase_ATR3(self):
     """Simera 3.13."""
     a = ATR([0x3B, 0x16, 0x18, 0x20, 0x02, 0x01, 0x00, 0x80, 0x0D])
     historicalbytes = [0x20, 0x02, 0x01, 0x00, 0x80, 0x0D]
     self.assertEquals(a.getHistoricalBytes(), historicalbytes)
     self.assertEquals(a.getChecksum(), None)
     self.assert_(a.isT0Supported())
     self.assert_(not a.isT1Supported())
     self.assert_(not a.isT15Supported())
示例#34
0
    def test_ATR6(self):
        atr = [0x3B, 0xE5, 0x00, 0x00, 0x81, 0x21, 0x45, 0x9C, 0x10,
               0x01, 0x00, 0x80, 0x0D]
        data_out = """TB1: 0
TC1: 0
TD1: 81
TD2: 21
TB3: 45
supported protocols T=1
T=0 supported: False
T=1 supported: True
checksum: 13
	clock rate conversion factor: 372
	bit rate adjustment factor: 1
	maximum programming current: 25
	programming voltage: 5
	guard time: 0
nb of interface bytes: 5
nb of historical bytes: 5
"""
        a = ATR(atr)
        a.dump()
        output = sys.stdout.getvalue()
        self.assertEqual(output, data_out)
示例#35
0
def translate_atr(atr):
	
	atr = ATR(atr)
	print atr
	print 'historical bytes: ', toHexString( atr.getHistoricalBytes() )
	print 'checksum: ', "0x%X" % atr.getChecksum()
	print 'checksum OK: ', atr.checksumOK
	print 'T0 supported: ', atr.isT0Supported()
	print 'T1 supported: ', atr.isT1Supported()
	print 'T15 supported: ', atr.isT15Supported()
示例#36
0
 def testcase_ATR4(self):
     """SIMRock'n Tree"""
     a = ATR([0x3B, 0x77, 0x94, 0x00, 0x00, 0x82, 0x30, 0x00, 0x13,
         0x6C, 0x9F, 0x22])
     historicalbytes = [0x82, 0x30, 0x00, 0x13, 0x6C, 0x9F, 0x22]
     self.assertEquals(a.getHistoricalBytes(), historicalbytes)
     self.assertEquals(a.getChecksum(), None)
     self.assert_(a.isT0Supported())
     self.assert_(not a.isT1Supported())
     self.assert_(not a.isT15Supported())
示例#37
0
def getATR():

    atr = ATR([
        0x3B, 0x9E, 0x95, 0x80, 0x1F, 0xC3, 0x80, 0x31, 0xA0, 0x73, 0xBE, 0x21,
        0x13, 0x67, 0x29, 0x02, 0x01, 0x01, 0x81, 0xCD, 0xB9
    ])

    print(atr)
    print('historical bytes: ', toHexString(atr.getHistoricalBytes()))
    print('checksum: ', "0x%X" % atr.getChecksum())
    print('checksum OK: ', atr.checksumOK)
    print('T0  supported: ', atr.isT0Supported())
    print('T1  supported: ', atr.isT1Supported())
    print('T15 supported: ', atr.isT15Supported())
示例#38
0
def getinfo(connection: CardConnectionDecorator) -> dict:
    atr = ATR(connection.getATR())
    hb = toHexString(atr.getHistoricalBytes())
    cardname = hb[-17:-12]
    name = cardnameMap.get(cardname, "Unknown " + str(cardname))
    return {
        "Name": name,
        "T0": atr.isT0Supported(),
        "T1": atr.isT1Supported(),
        "T15": atr.isT15Supported()
    }
示例#39
0
def test_detecting_diversifier_from_card_types():
    config = configparser.ConfigParser()
    config["PATHS"] = {"gp.jar": ""}
    types = configparser.ConfigParser()
    atr = "3b fe 18 00 00 80 31 fe 45 53 43 45 36 30 2d 43 44 30 38 31 2d 6e 46 a9"
    types[atr] = {
        "diversifier": "EMV",
    }

    gp = GlobalPlatformProWrapper(config=config,
                                  card_types=types,
                                  dry_run=True)
    card = Card(gp=gp)
    card.atr = ATR([int(x, 16) for x in atr.split()])
    gp.card = card
    gp.infer_diversifier()
    assert gp.diversifier == Diversifier.EMV
示例#40
0
    def open(self):
        PcscReader.open(self)

        # We could pass this into connect, but this is clearer
        self.atr = ATR(self.conn.getATR())
        if DEBUG:
            print 'ATR: %s' % self.atr
            self.atr.dump()

        if not self.atr.isT0Supported():
            self.close()
            raise CardConnectionException('Reader reports T0 protocol not supported')

        if DEBUG:
            print 'Firmware version %s' % self.firmware_version()

        self.pn532.set_retries(0, 0, 0)
示例#41
0
 def testcase_ATR1(self):
     """Usimera Classic 2."""
     a = ATR([0x3B, 0x9E, 0x95, 0x80, 0x1F, 0xC3, 0x80, 0x31, 0xA0, 0x73,
         0xBE, 0x21, 0x13, 0x67, 0x29, 0x02, 0x01, 0x01, 0x81, 0xCD, 0xB9])
     historicalbytes = [0x80, 0x31, 0xA0, 0x73, 0xBE, 0x21, 0x13, 0x67,
         0x29, 0x02, 0x01, 0x01, 0x81, 0xCD]
     self.assertEquals(a.getHistoricalBytes(), historicalbytes)
     self.assertEquals(a.getChecksum(), 0xB9)
     self.assert_(a.checksumOK)
     self.assert_(a.isT0Supported())
     self.assert_(not a.isT1Supported())
     self.assert_(a.isT15Supported())
示例#42
0
    def run(self):
        report = {}
        if not self.single_card_inserted():
            sys.exit(1)
        else:
            # now we know, that there is exactly one card connected and we can record its' ATR
            self.card.atr = ATR(self.cards[0].getATR())
            self.card.reader = self.cards[0].getReader()
        builder = BaseAttackBuilder(gp=self.gp, workdir=DATA / "jcversion")
        builder.execute(BaseAttackBuilder.COMMANDS.build)
        used_aids = self.card.get_current_aids()
        if not builder.uniq_aids(used_aids):
            builder.uniqfy(used_aids)
            builder.execute(BaseAttackBuilder.COMMANDS.build)
        # FIXME don't hardcode it for a card!  put JCVersion into a used-config.ini
        # FIXME getting the jc version still seems to cause troubles
        self.card.jcversion = self.get_jc_version()
        self.card.sdks = self.card.jcversion.get_sdks()
        report["JCVersion"] = self.card.jcversion
        report["SDKs"] = self.card.sdks

        return report
示例#43
0
文件: rfid.py 项目: marksteward/RFUID
    def open(self):
        PcscReader.open(self)

        # We could pass this into connect, but this is clearer
        self.atr = ATR(self.conn.getATR())
        if DEBUG:
            print 'ATR: %s' % self.atr
            try:
                self.atr.dump()
            except TypeError as e:
                print 'Exception %r dumping ATR' % e

        if self.atr.isT1Supported():
            # will raise NoCardException if no card is present
            resp, sw1, sw2 = self.send_to_tag(None, APDU(0xff, 0xca), protocol=smartcard.scard.SCARD_PROTOCOL_T1)
            uid = ''.join('%02x' % ord(c) for c in resp)
        else:
            uid = None

        self.tag = Tag(self, None, None, None)
        self.tag.uid = uid
        self.tag.ats = self.atr.bytes
示例#44
0
def main():
    global ATRS
    get_smartcards_list()
    cardtype = AnyCardType()
    while True:
        cardrequest = CardRequest(timeout=120, cardType=cardtype)
        cardservice = cardrequest.waitforcard()
        cardservice.connection.connect()
        atrBytes = cardservice.connection.getATR()
        atr = ATR(atrBytes)
        print(atr)
        print('historical bytes: ', toHexString(atr.getHistoricalBytes()))
        print('checksum: ', "0x%X" % atr.getChecksum())
        print('checksum OK: ', atr.checksumOK)
        print('T0  supported: ', atr.isT0Supported())
        print('T1  supported: ', atr.isT1Supported())
        print('T15 supported: ', atr.isT15Supported())
        if (ATRS[toHexString(atrBytes)]):
            print(ATRS[toHexString(atrBytes)])
        print(cardservice.connection)
        send(cardservice.connection)
        sleep(5)
    return 0
示例#45
0
def info():
    global connection

    recognized_cards = {
        '00 01': 'MIFARE Classic 1K',
        '00 02': 'MIFARE Classic 4K',
        '00 03': 'MIFARE Ultralight',
        '00 26': 'MIFARE Mini',
        'F0 04': 'Topaz and Jewel',
        'F0 11': 'FeliCa 212K/424K'
    }

    if connection:
        print('[*] Tag Information\n')

        atr = ATR(connection.getATR())
        hb = toHexString(atr.getHistoricalBytes())
        name_key = hb[-17:-12]
        card_name = recognized_cards.get(name_key, 'Unknown')
        print('[+] Card Name:  ', card_name)
        print('[+] T0 Support: ', atr.isT0Supported())
        print('[+] T1 Support: ', atr.isT1Supported())
        print('[+] T15 Support:', atr.isT15Supported())
示例#46
0
    for ch in s:
        hv = int(ch, 16)
        lst.append(hv)

    return lst


f = open("data.txt", "a+")
for reader in readers():
    try:
        connection = reader.createConnection()
        connection.connect()
        atr = toHexString(connection.getATR())
        atr1 = atr.split(' ', 18)
        atr2 = toHex(atr1)
        atr3 = ATR(atr2)
        cardtype = AnyCardType()
        cardrequest = CardRequest(timeout=10, cardType=cardtype)
        cardservice = cardrequest.waitforcard()
        cardservice.connection.connect()
        READ = [0x00, 0xCA, 0x00, 0x00]
        apdu = READ
        print(reader, ': ', toHexString(connection.getATR()))
        print('Historical bytes: ', toHexString(atr3.getHistoricalBytes()))
        f.write(toHexString(connection.getATR()))
        f.write("\n")
        print("Send ACR to file")
        print('Sending ', toHexString(apdu), '...')
        response, status1, status2 = cardservice.connection.transmit(apdu)
        print('Response: ', response, ' |  status: ',
              "%x %x" % (status1, status2))
示例#47
0
This file is part of pyscard.

pyscard is free software; you can redistribute it and/or modify
it under the terms of the GNU Lesser General Public License as published by
the Free Software Foundation; either version 2.1 of the License, or
(at your option) any later version.

pyscard is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU Lesser General Public License for more details.

You should have received a copy of the GNU Lesser General Public License
along with pyscard; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
"""
from smartcard.ATR import ATR
from smartcard.util import toHexString

atr = ATR([0x3B, 0x9E, 0x95, 0x80, 0x1F, 0xC3, 0x80, 0x31, 0xA0, 0x73,
                 0xBE, 0x21, 0x13, 0x67, 0x29, 0x02, 0x01, 0x01, 0x81,
                 0xCD, 0xB9])

print atr
print 'historical bytes: ', toHexString(atr.getHistoricalBytes())
print 'checksum: ', "0x%X" % atr.getChecksum()
print 'checksum OK: ', atr.checksumOK
print 'T0  supported: ', atr.isT0Supported()
print 'T1  supported: ', atr.isT1Supported()
print 'T15 supported: ', atr.isT15Supported()
示例#48
0
#! /usr/bin/env python
"""
Smart Card Reader / Writer
"""

from smartcard.CardType import AnyCardType
from smartcard.CardRequest import CardRequest
from smartcard.util import toHexString
from smartcard.ATR import ATR

card_type = AnyCardType()
card_request = CardRequest(timeout=1, cardType=card_type)
card_service = card_request.waitforcard()

card_service.connection.connect()
atr = ATR(card_service.connection.getATR())
print('------- SMART CARD INFO -------')
print(toHexString(card_service.connection.getATR()))
print('Historical bytes: ', toHexString(atr.getHistoricalBytes()))
print('Checksum: ', "0x%X" % atr.getChecksum())
print('Checksum OK: ', atr.checksumOK)
print('T0 supported: ', atr.isT0Supported())
print('T1 supported: ', atr.isT1Supported())
print('T15 supported: ', atr.isT15Supported())
print('-------------------------------')

GET = [0xFF, 0xCA, 0x00, 0x00, 0x00]
DF_TELECOM = [0xFF, 0xB0, 0x00, 0x04, 0x04]
AUTH_KEY = [0xFF, 0x82, 0x00, 0x00, 0x06, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF]

示例#49
0
###########################################################


## Include all library elements:
from smartcard.CardType import ATRCardType
from smartcard.ATR import ATR
from smartcard.CardConnection import CardConnection
from smartcard.CardRequest import CardRequest
from smartcard.util import toHexString, toBytes, toASCIIString, bs2hl
## Import an AES algorithm for checking the results:
import Crypto.Cipher.AES

## Here, we define the card type which we want to
## listen to:
cardtype = ATRCardType( toBytes( "3B 90 11 00" ) )
atr = ATR( toBytes( "3B 90 11 00" ) )
if not atr.isT0Supported():
  print "Error: Card does not support T0 protocol."
#fi

cardrequest = CardRequest( timeout=5, cardType=cardtype )

## Wait for the card to be present:
## In case the card is in the reader, this command will return immediately.
cardservice = cardrequest.waitforcard()

## Connect to the card using T0 protocol.
cardservice.connection.connect( CardConnection.T0_protocol )

## Print the Answer To Reset (ATR), which should be: 3B 90 11 00
print toHexString( cardservice.connection.getATR() )
示例#50
0
 def testcase_ATR6(self):
     """Simagine 2002"""
     a = ATR([0x3B, 0x16, 0x94, 0x20, 0x02, 0x01, 0x00, 0x00, 0x0D])
     historicalbytes = [0x20, 0x02, 0x01, 0x00, 0x00, 0x0D]
     self.assertEqual(a.getHistoricalBytes(), historicalbytes)
     self.assertEqual(a.getChecksum(), None)
示例#51
0
 def testcase_ATR6(self):
     """Simagine 2002"""
     a = ATR([0x3B, 0x16, 0x94, 0x20, 0x02, 0x01, 0x00, 0x00, 0x0D])
     historicalbytes = [0x20, 0x02, 0x01, 0x00, 0x00, 0x0D]
     self.assertEquals(a.getHistoricalBytes(), historicalbytes)
     self.assertEquals(a.getChecksum(), None)
示例#52
0
class AcsReader(PcscReader):
    def __init__(self, reader):
        PcscReader.__init__(self, reader)
        self.pn532 = Pn532(self)

    def open(self):
        PcscReader.open(self)

        # We could pass this into connect, but this is clearer
        self.atr = ATR(self.conn.getATR())
        if DEBUG:
            print 'ATR: %s' % self.atr
            self.atr.dump()

        if not self.atr.isT0Supported():
            self.close()
            raise CardConnectionException('Reader reports T0 protocol not supported')

        if DEBUG:
            print 'Firmware version %s' % self.firmware_version()

        self.pn532.set_retries(0, 0, 0)

    def send(self, apdu):
        resp, sw1, sw2 = self.conn.transmit(list(apdu))
        return resp, sw1, sw2


    def firmware_version(self):
        apdu = APDU(0xff, 0, 0x48)
        resp, sw1, sw2 = self.send(apdu)
        return toASCIIString(resp + [sw1, sw2])


    def led_buzzer(self, red=None, green=None, blink=None, buzzer=None):
        led_ctl = 0
        if red is not None:
            led_ctl |= 0x4
            if not isinstance(red, (list, tuple)):
                red = False, False, red

            initial_led, blink_led, final_led = red
            led_ctl |= 0x1 if final_led else 0
            led_ctl |= 0x10 if initial_led else 0
            led_ctl |= 0x40 if blink_led else 0
            
        if green is not None:
            led_ctl |= 0x8
            if not isinstance(green, (list, tuple)):
                green = False, False, green

            initial_led, blink_led, final_led = green
            led_ctl |= 0x2 if final_led else 0
            led_ctl |= 0x20 if initial_led else 0
            led_ctl |= 0x80 if blink_led else 0
        
        initial_delay, blink_delay, blink_count = 0, 0, 0
        if blink:
            initial_delay, blink_delay, blink_count = blink
            initial_delay = initial_delay / 100
            blink_delay = blink_delay / 100

        buzz_ctl = 0
        if buzzer:
            initial_buzz, blink_buzz = buzzer
            buzz_ctl = 0
            buzz_ctl |= 0x1 if initial_buzz else 0
            buzz_ctl |= 0x2 if blink_buzz else 0

        extra = [initial_delay, blink_delay, blink_count, buzz_ctl]

        apdu = APDU(0xff, 0, 0x40, led_ctl, data=extra)
        resp, sw1, sw2 = self.send(apdu)
        if sw1 != 0x90:
            raise ReaderException('Error setting LEDs %02x%02x' % (sw1, sw2))

        red, green = map(bool, [sw2 & 0x1, sw2 & 0x2])
        return red, green


    def red_on(self):
        self.led_buzzer(red=True)

    def red_off(self):
        self.led_buzzer(red=False)

    def green_on(self):
        self.led_buzzer(green=True)

    def green_off(self):
        self.led_buzzer(green=False)

    def denied(self):
        self.led_buzzer(
            red=[True, False, False],
            green=[True, True, False],
            blink=[500, 300, 3],
            buzzer=[True, False]
        )


    def send_to_pn532(self, apdu):
        apdu = APDU(0xff, 0, 0, data=apdu)
        resp, sw1, sw2 = self.send(apdu)

        if sw1 != 0x61:
            raise ReaderException('Error communicating with PN532: %02x%02x' % (sw1, sw2))

        apdu = APDU(0xff, 0xc0, lc=sw2)
        resp, sw1, sw2 = self.send(apdu)

        return resp, sw1, sw2

    def send_to_sam(self, p1, p2, lc):
        if (self.atr.TS, self.atr.T0) == (0x3b, 0):
            raise SAMException('SAM not reported present')

        resp, sw1, sw2 = self.send(APDU(0x80, 0x14, p1, p2, lc))
        if (sw1, sw2) != (0x90, 0):
            raise ReaderException('Error communicating with SAM: %02x%02x' % (sw1, sw2))

        return resp

    def sam_serial(self):
        return self.send_to_sam(0, 0, 8)

    def sam_id(self):
        return self.send_to_sam(4, 0, 6)

    def sam_os(self):
        resp = self.send_to_sam(6, 0, 8)
        os = resp[:4]
        rest = resp[4:]
        return toASCIIString(os), rest