def tricall2():
"""
test reading Triangle file utilities
"""
import triIfaceUtils
import triIfaceFileUtils
reader = triIfaceUtils.TriangleInputFileReader()
filebase = 'trimesh'
nodeDataInfo,nodeData = reader.readNodes(filebase)
nodes,nodesA,nodesM = (nodeData['nodes'],
nodeData['nodeAttributes'],
nodeData['nodeMarkers'])
print 'Nodes: nodeInfo= ',nodeDataInfo
print """Nodes: nodes= \n%s\n nodeAttributes= \n%s\n nodeMarkers= \n%s\n """ % (nodes,
nodesA,
nodesM)
triDataInfo,triData = reader.readTriangles(filebase)
triangles,trianglesA = triData['triangles'],triData['triangleAttributes']
print 'Triangles: triInfo= ',triDataInfo
print """Triangles: elems= \n%s\n triAttributes= \n%s\n""" % (triangles,
trianglesA)
#write out assuming just read in node and ele files
filebaseout = filebase+'-out-0'
tri0 = triangulate.new()
if nodesM == None:
triangulate.setPoints(tri0,nodes)
else:
triangulate.setPointsAndMarkers(tri0,nodes,nodesM)
if not nodesA == None:
triangulate.setPointAttributes(tri0,nodesA)
#end if
triangulate.setTriangles(tri0,triangles)
if not trianglesA == None:
triangulate.setTriangleAttributes(tri0,trianglesA)
#end if
triIfaceUtils.writeOutTriangulation(tri0,filebaseout,nbase=0,verbose=0)
#now view with showme
showme = "../bin/showme"
showmecmd = """showme %s """ % filebaseout
failure = 0
failure = triIfaceFileUtils.checkFileExists(showme)
failure = os.system(showmecmd)
##now read from .poly file
polyDataInfo,polyData = reader.readPoly(filebase)
for type in ['node','segment','hole','region']:
print 'Poly: ',type,'Info= \n',polyDataInfo[type],'\n'
#
nodes2,nodesA2,nodesM2 = (polyData['node']['nodes'],
polyData['node']['nodeAttributes'],
polyData['node']['nodeMarkers'])
segments2,segmentsM2 = (polyData['segment']['segments'],
polyData['segment']['segmentMarkers'])
holes2 = polyData['hole']['holes']
regions2 = polyData['region']['regions']
print """Poly file read:
nodes = \n%s\n nodeAttributes= \n%s\n nodeMarkers= \n%s\n
segments= \n%s\n segmentMarkers= \n%s\n
holes = \n%s\n
regions = \n%s\n
""" % (nodes2,nodesA2,nodesM2,segments2,segmentsM2,holes2,regions2)
### now create a triangulation and write out the data arrays?
trin1 = triangulate.new()
filebaseout1 = filebase+"-out-1"
if nodesM2 == None:
triangulate.setPoints(trin1,nodes2,nodesM2)
else:
triangulate.setPointsAndMarkers(trin1,nodes2,nodesM2)
if not nodesA2 == None:
triangulate.setPointAttributes(trin1,nodesA2)
#end if
if segmentsM2 == None:
triangulate.setSegments(trin1,segments2)
else:
triangulate.setSegmentsAndMarkers(trin1,segments2,segmentsM2)
if not holes2 == None:
triangulate.setHoles(trin1,holes2)
#end if
if not regions2 == None:
#print 'setting trin1 regions=\n',regions2
triangulate.setRegions(trin1,regions2)
#end if
trout1 = triangulate.new()
flags = "zpne" #needs to be base 0 if Input was that way (and nbase=0)
triangulate.applyTriangulateNoVoronoi(flags,trin1,trout1)
triIfaceUtils.writeOutTriangulation(trout1,filebaseout1,nbase=0,verbose=0)
#now view with showme
showmecmd = """showme %s """ % filebaseout1
failure = 0
failure = triIfaceFileUtils.checkFileExists(showme)
failure = os.system(showmecmd)
def readFromPolyFile(self,filebase,flagsAdd="",verbose=0):
"""
read triangle representation from filebase.poly file
assumes the nbase data member is set appropriately
"""
reader = triIfaceUtils.TriangleInputFileReader()
if verbose > 0:
print 'readFromPolyFile filebase= ',filebase
#end if
polyDataInfo,polyData = reader.readPoly(filebase,nbase=self.nbase,
verbose=verbose)
if verbose > 3:
for type in ['node','segment','hole','region']:
print 'Poly: ',type,'Info= \n',polyDataInfo[type],'\n'
#end for
#end if
nodes,nodesA,nodesM = (polyData['node']['nodes'],
polyData['node']['nodeAttributes'],
polyData['node']['nodeMarkers'])
segments,segmentsM = (polyData['segment']['segments'],
polyData['segment']['segmentMarkers'])
holes = polyData['hole']['holes']
regions = polyData['region']['regions']
if verbose > 3:
print """Poly file read:
nodes = \n%s\n nodeAttributes= \n%s\n nodeMarkers= \n%s\n
segments= \n%s\n segmentMarkers= \n%s\n
holes = \n%s\n
regions = \n%s\n
""" % (nodes,nodesA,nodesM,segments,segmentsM,holes,regions)
#end if
tri0 = triangulate.new()
if nodesM == None:
triangulate.setPoints(tri0,nodes)
else:
triangulate.setPointsAndMarkers(tri0,nodes,nodesM)
if not nodesA == None:
triangulate.setPointAttributes(tri0,nodesA)
#end if
if segmentsM == None:
triangulate.setSegments(tri0,segments)
else:
triangulate.setSegmentsAndMarkers(tri0,segments,segmentsM)
#end if
if (not holes == None):
triangulate.setHoles(tri0,holes)
#end if
if (not regions == None):
#print 'setting trin1 regions=\n',regions2
triangulate.setRegions(tri0,regions)
#end if
flags = flagsAdd+self.baseFlags
if flags.find('p') == -1:
print 'flags = ',flags,' must have p, appending'
flags += "p"
#end
if flags.find('v') >= 0:
self.makeVoronoi = True
if verbose > 0:
print 'readNodeAndEle makeVoronoi= ',self.makeVoronoi,' flags= ',flags
#end if
self.lastFlags = flags
#reset data representations if necessary
self.resetDefaultTrirep(index=0,verbose=verbose)
if self.makeVoronoi:
self.resetDefaultVorrep(index=0,verbose=verbose)
#end vorrep initialized
if self.makeVoronoi:
triangulate.applyTriangulate(flags,tri0,self.trirep[0],self.vorrep[0])
#handles no longer contain trivial representations
self.trirepDefaultInit[0] = False
self.vorrepDefaultInit[0] = False
else:
triangulate.applyTriangulateNoVoronoi(flags,tri0,self.trirep[0])
#handle no longer contains trivial representations
self.trirepDefaultInit[0] = False
#end if
#clean up?
del tri0
def readFromPolyFile(self, filebase, flagsAdd="", verbose=0):
"""
read triangle representation from filebase.poly file
assumes the nbase data member is set appropriately
"""
reader = triIfaceUtils.TriangleInputFileReader()
if verbose > 0:
print 'readFromPolyFile filebase= ', filebase
#end if
polyDataInfo, polyData = reader.readPoly(filebase,
nbase=self.nbase,
verbose=verbose)
if verbose > 3:
for type in ['node', 'segment', 'hole', 'region']:
print 'Poly: ', type, 'Info= \n', polyDataInfo[type], '\n'
#end for
#end if
nodes, nodesA, nodesM = (polyData['node']['nodes'],
polyData['node']['nodeAttributes'],
polyData['node']['nodeMarkers'])
segments, segmentsM = (polyData['segment']['segments'],
polyData['segment']['segmentMarkers'])
holes = polyData['hole']['holes']
regions = polyData['region']['regions']
if verbose > 3:
print """Poly file read:
nodes = \n%s\n nodeAttributes= \n%s\n nodeMarkers= \n%s\n
segments= \n%s\n segmentMarkers= \n%s\n
holes = \n%s\n
regions = \n%s\n
""" % (nodes, nodesA, nodesM, segments, segmentsM, holes, regions)
#end if
tri0 = triangulate.new()
if nodesM == None:
triangulate.setPoints(tri0, nodes)
else:
triangulate.setPointsAndMarkers(tri0, nodes, nodesM)
if not nodesA == None:
triangulate.setPointAttributes(tri0, nodesA)
#end if
if segmentsM == None:
triangulate.setSegments(tri0, segments)
else:
triangulate.setSegmentsAndMarkers(tri0, segments, segmentsM)
#end if
if (not holes == None):
triangulate.setHoles(tri0, holes)
#end if
if (not regions == None):
#print 'setting trin1 regions=\n',regions2
triangulate.setRegions(tri0, regions)
#end if
flags = flagsAdd + self.baseFlags
if flags.find('p') == -1:
print 'flags = ', flags, ' must have p, appending'
flags += "p"
#end
if flags.find('v') >= 0:
self.makeVoronoi = True
if verbose > 0:
print 'readNodeAndEle makeVoronoi= ', self.makeVoronoi, ' flags= ', flags
#end if
self.lastFlags = flags
#reset data representations if necessary
self.resetDefaultTrirep(index=0, verbose=verbose)
if self.makeVoronoi:
self.resetDefaultVorrep(index=0, verbose=verbose)
#end vorrep initialized
if self.makeVoronoi:
triangulate.applyTriangulate(flags, tri0, self.trirep[0],
self.vorrep[0])
#handles no longer contain trivial representations
self.trirepDefaultInit[0] = False
self.vorrepDefaultInit[0] = False
else:
triangulate.applyTriangulateNoVoronoi(flags, tri0, self.trirep[0])
#handle no longer contains trivial representations
self.trirepDefaultInit[0] = False
#end if
#clean up?
del tri0
def tricall2():
"""
test reading Triangle file utilities
"""
import triIfaceUtils
import triIfaceFileUtils
reader = triIfaceUtils.TriangleInputFileReader()
filebase = 'trimesh'
nodeDataInfo, nodeData = reader.readNodes(filebase)
nodes, nodesA, nodesM = (nodeData['nodes'], nodeData['nodeAttributes'],
nodeData['nodeMarkers'])
print 'Nodes: nodeInfo= ', nodeDataInfo
print """Nodes: nodes= \n%s\n nodeAttributes= \n%s\n nodeMarkers= \n%s\n """ % (
nodes, nodesA, nodesM)
triDataInfo, triData = reader.readTriangles(filebase)
triangles, trianglesA = triData['triangles'], triData['triangleAttributes']
print 'Triangles: triInfo= ', triDataInfo
print """Triangles: elems= \n%s\n triAttributes= \n%s\n""" % (triangles,
trianglesA)
#write out assuming just read in node and ele files
filebaseout = filebase + '-out-0'
tri0 = triangulate.new()
if nodesM == None:
triangulate.setPoints(tri0, nodes)
else:
triangulate.setPointsAndMarkers(tri0, nodes, nodesM)
if not nodesA == None:
triangulate.setPointAttributes(tri0, nodesA)
#end if
triangulate.setTriangles(tri0, triangles)
if not trianglesA == None:
triangulate.setTriangleAttributes(tri0, trianglesA)
#end if
triIfaceUtils.writeOutTriangulation(tri0, filebaseout, nbase=0, verbose=0)
#now view with showme
showme = "../bin/showme"
showmecmd = """showme %s """ % filebaseout
failure = 0
failure = triIfaceFileUtils.checkFileExists(showme)
failure = os.system(showmecmd)
##now read from .poly file
polyDataInfo, polyData = reader.readPoly(filebase)
for type in ['node', 'segment', 'hole', 'region']:
print 'Poly: ', type, 'Info= \n', polyDataInfo[type], '\n'
#
nodes2, nodesA2, nodesM2 = (polyData['node']['nodes'],
polyData['node']['nodeAttributes'],
polyData['node']['nodeMarkers'])
segments2, segmentsM2 = (polyData['segment']['segments'],
polyData['segment']['segmentMarkers'])
holes2 = polyData['hole']['holes']
regions2 = polyData['region']['regions']
print """Poly file read:
nodes = \n%s\n nodeAttributes= \n%s\n nodeMarkers= \n%s\n
segments= \n%s\n segmentMarkers= \n%s\n
holes = \n%s\n
regions = \n%s\n
""" % (nodes2, nodesA2, nodesM2, segments2, segmentsM2, holes2, regions2)
### now create a triangulation and write out the data arrays?
trin1 = triangulate.new()
filebaseout1 = filebase + "-out-1"
if nodesM2 == None:
triangulate.setPoints(trin1, nodes2, nodesM2)
else:
triangulate.setPointsAndMarkers(trin1, nodes2, nodesM2)
if not nodesA2 == None:
triangulate.setPointAttributes(trin1, nodesA2)
#end if
if segmentsM2 == None:
triangulate.setSegments(trin1, segments2)
else:
triangulate.setSegmentsAndMarkers(trin1, segments2, segmentsM2)
if not holes2 == None:
triangulate.setHoles(trin1, holes2)
#end if
if not regions2 == None:
#print 'setting trin1 regions=\n',regions2
triangulate.setRegions(trin1, regions2)
#end if
trout1 = triangulate.new()
flags = "zpne" #needs to be base 0 if Input was that way (and nbase=0)
triangulate.applyTriangulateNoVoronoi(flags, trin1, trout1)
triIfaceUtils.writeOutTriangulation(trout1,
filebaseout1,
nbase=0,
verbose=0)
#now view with showme
showmecmd = """showme %s """ % filebaseout1
failure = 0
failure = triIfaceFileUtils.checkFileExists(showme)
failure = os.system(showmecmd)
