Stargate dialing simulator written in Python designed to run on Raspberry Pi.

1. sudo nano /etc/network/interfaces

2. Add the following:

   auto wlan0
   iface wlan0 inet dhcp
   wireless-essid myessid #router ssid
   wireless-mode managed
   
   wpa-ssid myessid #router ssid
   wpa-psk my-encryption-key #router password
   

3. For a static IP, change/add the following:

   address 192.168.1.6 #desired IP address of Pi
   netmask 255.255.255.0
   network 192.168.1.0 #low IP range of network
   broadcast 192.168.1.255 #high IP range of network
   gateway 192.168.1.1 #IP address of router
   

4. Edit the config file to control dongle power settings: sudo nano /etc/modprobe.d/8192cu.conf

5. Add the following to disable power management: options 8192cu rtw_power_mgnt=0 rtw_enusbss=0

6. Edit the crontab: sudo crontab -e

7. Add the following to set the Pi to ping the router every 500ms:

   */1 * * * * ping -c 1 192.168.1.1 #replace IP address with that of your router

8. Connect to internet via wired network.

9. Run sudo apt-get update

10. Run sudo apt-get install wpasupplicant

11. Reboot the Pi