This custom component home-assistant (http://www.home-assistant.io) can control the Slide (https://slide.store).

• Home Assistant 0.94+

The slide integration is included into the Home Assistant and it is based on this custom component. The custom component will contain newer features then the standard integrated one, until it is hopefully merged into Home Assistant. At this moment the local API will only be available in the custom component. Also Home Assistant dictates that integrations should move to the GUI integration instead of the YAML file, which is difficult/impossible with the local API configuration.

• Copy directory slide <config dir>/custom_components directory.
• Configure with config below.
• Restart Home-Assistant.

By default the Slide connects to the cloud API, but it is possible to use the local API too (only 1 of them can be active). To switch between the cloud and local API, do the following step:

• Press the reset button 2x

LED flashes 5x fast: cloud API disabled, local API enabled
LED flashes 2x slow: local API disabled, cloud API enabled

NOTE: If a new Slide is installed, it could be the firmware is too old. Configure it via the cloud API and wait a few days (or contact Slide support to push a newer firmware).

To use this component in your installation for the Cloud API, add the following to your configuration.yaml file:

# Example configuration.yaml entry

slide:
  username: slide@somedomain.com
  password: secret
  scan_interval: 30
  invert_position: False
  verify_ssl: True

Configuration variables:

• username (Required): The e-mail used to register your account with api.goslide.io, with your iPhone/Android App
• password (Required): The password of your account with api.goslide.io
• scan_interval (Optional): Number of seconds between polls (default = 30)
• invert_position (Optional): If the position should be inverted e.g. 0% -> 100% and 100% -> 0% (default = False)
• verify_ssl (Optional): If the SSL certificate should be checked (default = True)

To use this component in your installation With the Local API, add the following to your configuration.yaml file for each Slide:

# Example yaml entry

cover:
  - platform: slide
    host: 192.168.1.1
    password: 12345678

Configuration variables:

• host (Required): The IP address or hostname of your local Slide
• password (Required): The device code of your Slide (inside of the Slide or in the box, length is 8 characters)
• invert_position (Optional): If the position should be inverted e.g. 0% -> 100% and 100% -> 0% (default = False)

• slide.calibrate - It is possible to call this service to calibrate your Slide

It is possible to debug the Slide component and API library, this can be done by adding the following lines to the configuration.yaml file:

logger:
  logs:
    goslideapi: debug
    custom_components.slide: debug
    homeassistant.components.slide: debug