global START_TIME #hacking about for determining callback interval times. I shouldn't be using global, but fukkit.

now = time.time()

print "Callback!", bufPtr, bufLen

print bufPtr[0]

arr = SignalHound.decodeRawSweep(bufPtr, bufLen)

print "NP Array = ", arr.shape, arr

print "Elapsed Time = ", now-START_TIME

sh.configureCenterSpan(150e6, 100e6)

sh.configureLevel(-50, 10)

sh.configureGain(0)

sh.configureSweepCoupling(9.863e3, 9.863e3, 10, "native", "no-spur-reject")

sh.configureWindow("hamming")

sh.configureProcUnits("power")

sh.configureTrigger("none", "rising-edge", 0, 5)

sh.configureIO("dc", "int-ref-out", "out-logic-low")

sh.configureDemod("fm", 92.9e6, 250e3, 12e3, 20, 50)

sh.initiate("raw-sweep-loop", 0)

sh.startRawSweepLoop(callbackTestFunc)

try:

time.sleep(50)

except KeyboardInterrupt:

pass

global START_TIME #hacking about for determining callback interval times. I shouldn't be using global, but fukkit.

START_TIME = time.time()

loops = 0

sh.configureCenterSpan(100e6, 20e6)

sh.configureLevel(10, "auto")

sh.configureGain(0)

sh.configureIO("dc", "int-ref-out", "out-logic-low")

sh.configureIQ(1, 20e6) # 2x downdampling, 15 Mhz bandwith

sh.initiate("streaming", None)

print sh.queryStreamInfo()

print sh.rawDataArrSize

out = open("dat.bin", "wb")

try:

while 1:

try:

data = sh.fetchRaw()

DATA_LOG.append(data)

except IOError:

print "ioerror"

if loops % 100 == 0:

print loops

now = time.time()

delta = now-START_TIME

freq = 1 / (delta / 100)

print "Elapsed Time = ", delta, "Frequency = ", freq

START_TIME = now

if len(DATA_LOG):

tmp = DATA_LOG.pop()

out.write(tmp["data"])

out.write(tmp["triggers"])

loops += 1

time.sleep(50)

except KeyboardInterrupt:

pass

out.close()

global START_TIME #hacking about for determining callback interval times. I shouldn't be using global, but fukkit.

START_TIME = time.time()

loops = 0

sh.configureAcquisition("average", "log-scale")

sh.configureCenterSpan(150e6, 100e6)

sh.configureLevel(10, "auto")

sh.configureGain(0)

sh.configureSweepCoupling(9.863e3, 9.863e3, 10, "native", "no-spur-reject")

sh.configureWindow("hamming")

sh.configureProcUnits("power")

sh.configureTrigger("none", "rising-edge", 0, 5)

sh.configureIO("dc", "int-ref-out", "out-logic-low")

sh.configureDemod("fm", 92.9e6, 250e3, 12e3, 20, 50)

sh.configureRawSweep(100, 1, 16)

# sh.initiate("raw-sweep-loop", 0)

sh.initiate("raw-pipe", "20-mhz")

# print sh.queryTimestamp()

# sh.startRawSweepLoop(callbackTestFunc)

# ret = sh.fetchRawCorrections()

# for key, value in ret.iteritems():

# print key, value

# for item in ret["data"]:

# st = "%f" % item

# print st.rjust(12),

# if loops % 10 == 0:

# print

# loops += 1

out = open("dat.bin", "wb")

try:

while 1:

try:

DATA_LOG.append(sh.fetchRaw_s())

except IOError:

print "ioerror"

if loops % 100 == 0:

print loops

now = time.time()

delta = now-START_TIME

freq = 1 / (delta / 100)

print "Elapsed Time = ", delta, "Frequency = ", freq

START_TIME = now

if len(DATA_LOG):

tmp = DATA_LOG.pop()

out.write(tmp["data"])

out.write(tmp["triggers"])

loops += 1

time.sleep(50)

except KeyboardInterrupt:

pass

out.close()

global START_TIME #hacking about for determining callback interval times. I shouldn't be using global, but fukkit.

START_TIME = time.time()

loops = 0

sh.configureAcquisition("average", "log-scale")

sh.configureCenterSpan(center = 150e6, span = 100e6)

sh.configureLevel(ref = 10, atten = "auto")

sh.configureGain(gain = 0)

sh.configureSweepCoupling(rbw = 9.863e3, vbw = 9.863e3, sweepTime = 0.10, rbwType = "native", rejection = "no-spur-reject")

sh.configureWindow(window = "hamming")

sh.configureProcUnits(units = "power")

sh.configureTrigger(trigType = "none", edge = "rising-edge", level = 0, timeout = 5)

# sh.configureIO("dc", "int-ref-out", "out-logic-low")

# sh.configureDemod("fm", 102.3e6, 250e3, 12e3, 20, 50)

# sh.configureRawSweep(100, 8, 2)

sh.initiate(mode = "sweeping", flag = "ignored")

print sh.queryTraceInfo()

# sh.initiate("raw-sweep-loop", 0)

# print sh.queryTimestamp()

# sh.startRawSweepLoop(callbackTestFunc)

# ret = sh.fetchRawCorrections()

# for key, value in ret.iteritems():

# print key, value

# for item in ret["data"]:

# st = "%f" % item

# print st.rjust(12),

# if loops % 10 == 0:

# print

# loops += 1

out = open("dat.bin", "wb")

try:

while 1:

try:

DATA_LOG.append(sh.fetchTrace())

except IOError:

print "ioerror"

if loops % 20 == 0:

print loops

now = time.time()

delta = now-START_TIME

freq = 1 / (delta / 20)

print "Elapsed Time = ", delta, "Frequency = ", freq

START_TIME = now

if len(DATA_LOG):

tmp = DATA_LOG.pop()

print np.array_str(tmp["max"], max_line_width = sys.maxint), len(tmp["max"])

outStr = ""

# outStr = "%s, " % time.time()

outStr += " ".join(['%f,' % num for num in tmp["max"]])

outStr = outStr.rstrip(", ").lstrip(", ")

outStr += "\n"

out.write(outStr)

# for item in tmp["max"]:

# print item

loops += 1

time.sleep(50)

except KeyboardInterrupt:

pass

out.close()

global START_TIME #hacking about for determining callback interval times. I shouldn't be using global, but fukkit.

START_TIME = time.time()

loops = 0

sh.configureAcquisition("average", "log-scale")

sh.configureCenterSpan(center = 150e6, span = 100e6)

sh.configureLevel(ref = 10, atten = "auto")

sh.configureGain(gain = 0)

sh.configureSweepCoupling(rbw = 9.863e3, vbw = 9.863e3, sweepTime = 0.10, rbwType = "native", rejection = "no-spur-reject")

sh.configureWindow(window = "hamming")

sh.configureProcUnits(units = "power")

sh.configureTrigger(trigType = "none", edge = "rising-edge", level = 0, timeout = 5)

# sh.configureIO("dc", "int-ref-out", "out-logic-low")

# sh.configureDemod("fm", 102.3e6, 250e3, 12e3, 20, 50)

# sh.configureRawSweep(100, 8, 2)

# sh.initiate("raw-sweep-loop", 0)

# print sh.queryTimestamp()

# sh.startRawSweepLoop(callbackTestFunc)

# ret = sh.fetchRawCorrections()

# for key, value in ret.iteritems():

# print key, value

# for item in ret["data"]:

# st = "%f" % item

# print st.rjust(12),

# if loops % 10 == 0:

# print

# loops += 1

out = open("dat.bin", "wb")

try:

while 1:

sh.initiate(mode = "sweeping", flag = "ignored")

print sh.queryTraceInfo()

try:

tmp = sh.fetchTrace()

DATA_LOG.append(tmp)

print(tmp)

except IOError:

print "ioerror"

if loops % 20 == 0:

print loops

now = time.time()

delta = now-START_TIME

freq = 1 / (delta / 20)

print "Elapsed Time = ", delta, "Frequency = ", freq

START_TIME = now

if len(DATA_LOG):

tmp = DATA_LOG.pop()

print np.array_str(tmp["max"], max_line_width = sys.maxint), len(tmp["max"])

outStr = ""

# outStr = "%s, " % time.time()

outStr += " ".join(['%f,' % num for num in tmp["max"]])

outStr = outStr.rstrip(", ").lstrip(", ")

outStr += "\n"

out.write(outStr)

# for item in tmp["max"]:

# print item

loops += 1

sh.abort()

time.sleep(50)

except KeyboardInterrupt:

pass

global START_TIME #hacking about for determining callback interval times. I shouldn't be using global, but fukkit.

START_TIME = time.time()

loops = 0

sh.configureAcquisition("average", "log-scale")

sh.configureCenterSpan(center = 150e6, span = 100e6)

sh.configureLevel(ref = 10, atten = "auto")

sh.configureGain(gain = 0)

sh.configureSweepCoupling(rbw = 9.863e3, vbw = 9.863e3, sweepTime = 0.10, rbwType = "native", rejection = "no-spur-reject")

sh.configureWindow(window = "hamming")

sh.configureProcUnits(units = "power")

sh.configureTrigger(trigType = "gps-pps", edge = "rising-edge", level = 0, timeout = 5)

# sh.configureIO("dc", "int-ref-out", "out-logic-low")

# sh.configureDemod("fm", 102.3e6, 250e3, 12e3, 20, 50)

# sh.configureRawSweep(100, 8, 2)

sh.initiate(mode = "sweeping", flag = "ignored")

print sh.queryTraceInfo()

# sh.initiate("raw-sweep-loop", 0)

# print sh.queryTimestamp()

# sh.startRawSweepLoop(callbackTestFunc)

# ret = sh.fetchRawCorrections()

# for key, value in ret.iteritems():

# print key, value

# for item in ret["data"]:

# st = "%f" % item

# print st.rjust(12),

# if loops % 10 == 0:

# print

# loops += 1

out = open("dat.bin", "wb")

try:

while 1:

try:

DATA_LOG.append(sh.fetchTrace())

except IOError:

print "ioerror"

if loops % 20 == 0:

print loops

now = time.time()

delta = now-START_TIME

freq = 1 / (delta / 20)

print "Elapsed Time = ", delta, "Frequency = ", freq

START_TIME = now

if len(DATA_LOG):

tmp = DATA_LOG.pop()

print np.array_str(tmp["max"], max_line_width = sys.maxint), len(tmp["max"])

outStr = ""

# outStr = "%s, " % time.time()

outStr += " ".join(['%f,' % num for num in tmp["max"]])

outStr = outStr.rstrip(", ").lstrip(", ")

outStr += "\n"

out.write(outStr)

# for item in tmp["max"]:

# print item

loops += 1

time.sleep(50)

except KeyboardInterrupt:

pass

out.close()

sh.getFirmwareVersion()

sh.getAPIVersion()

print sh.getDeviceDiagnostics()

sh.getDeviceType()

print "Executing audio-test"

import pyaudio

c_FORMAT = pyaudio.paFloat32

c_CHANNELS = 1

c_RATE = 32000 # bbFetchAudio returns samples at 32 Khz

sOut = pyaudio.PyAudio()

stream = sOut.open(format = c_FORMAT, channels = c_CHANNELS, rate = c_RATE, output = True, frames_per_buffer = 4096)

# sh.preset()

sh.getDeviceDiagnostics()

# sh.configureAcquisition("average", "log-scale")

# sh.configureCenterSpan(100e6, 50e6)

# sh.configureLevel(-50, 10)

# sh.configureGain(0)

# sh.configureSweepCoupling(9.863e3, 9.863e3, 10, "native", "no-spur-reject")

# sh.configureWindow("hamming")

# sh.configureProcUnits("power")

# sh.configureTrigger("none", "rising-edge", 0, 5)

# sh.configureIO("dc", "int-ref-out", "out-logic-low")

sh.configureDemod("fm", freq, 160e3, 12e3, 20, 75)

# sh.getDeviceType()

# sh.getSerialNumber()

# sh.getFirmwareVersion()

# sh.getAPIVersion()

# sh.initiate("raw-sweep-loop", 0)

sh.initiate("audio-demod", "demod-fm")

# print sh.queryTimestamp()

# sh.startRawSweepLoop(testFunct)

try:

while 1:

audio = sh.fetchAudio() # fetchAudio is blocking.

stream.write(audio.astype(np.float32).tostring())

except KeyboardInterrupt:

pass

# sh.configureTimeGate(0,0,0)

# sh.configureRawSweep(500, 10, 16)

print "Available tests:"

print " 'radio' - Do streaming decode of a FM radio signal"

print " 'status' - Query device and API for some status and model information"

print " 'raw-pipe' - Try to log data from a raw-pipe connection to disk (warning - uses enormous amounts of disk space)"

print " 'callback' - Try to capture data via bbStartRawSweepLoop"

print " 'traces' - Fetch formatted traces, and log to disk"

print " 'int-traces' - Fetch formatted traces while continually restarting the acquisition, and log to disk"

print " 'iq' - Fetch IQ samples"

if len(sys.argv) <= 1:

print "You must enter a test mode!"

printUsage()

sys.exit()

funcs = {

'radio' : audioTest,

'status' : testDeviceStatusQueries,

'raw-pipe' : testRawPipeMode,

'callback' : testCallback,

'traces' : testSweeps,

'int-traces' : interruptedSweeping,

'gps' : testGpsSweeps,

'reset' : resetDevice,

'iq' : testIqStreaming

}

if sys.argv[1] in funcs:

logSetup.initLogging()

sh = SignalHound()

# sh.preset()

# testDeviceStatusQueries(sh)

# testRawPipeMode(sh)

if len(sys.argv) == 2:

funcs[sys.argv[1]](sh)

if len(sys.argv) == 3:

funcs[sys.argv[1]](sh, float(sys.argv[2]))

# testCallback(sh)

sh.closeDevice()

else:

print "Error! You must enter a valid test-mode!"