Skip to content

A system for controlling A/V devices such as video switchers via a networkable control device.

Notifications You must be signed in to change notification settings

jamesremuscat/avx

Repository files navigation

AVX - Audio-Visual Control Extensions

Build Status Coverage Status

Introduction

AVX is a library designed to allow control of A/V devices such as video switchers and PTZ cameras.

It's designed to allow control of devices locally or over a network via Pyro4 RPC. A "Controller" process acts as an interface to the devices, and controlling them is as straightforward as calling a method on the Controller object.

Rich client applications can be built with Qt or your windowing toolkit of choice, using Python and Pyro4 for communications.

Installation & configuration

The easiest method of installing is via pip, which will take care of all dependencies for you:

sudo pip install avx

You can also install from source with the usual python setup.py install routine.

AVX requires:

  • Python 2.7
  • enum34
  • Pyro4
  • pyserial
  • pyusb
  • setuptools
  • semantic_version

Mapping of physical hardware devices through serial ports to virtual devices is done in the config.json file. A typical definition of a single-device system may look like:

{
  "devices" : [
    {
      "deviceID" : "Main",
      "class" : "avx.devices.serial.KramerVP88.KramerVP88",
      "options" : {
        "serialDevice" : "/dev/usb-ports/1-1.3.3:1.0",
        "machineNumber" : 1
      }
    }
  ]
}

Elements under "options" are passed directly as named parameters to the constructor of the class. Most, but not all, current devices require a serialDevice option.

Be sure to map devices based on their USB device path - /dev/ttyUSBx'es might get swapped round after a reboot, which would break your configuration. Scripts included under scripts/etc/udev/rules.d will create symlinks based on device path, which relates to the physical port a device is plugged in to, in a /dev/usb-ports/ directory. This will not change unless you physically swap the port a device is plugged in to.

Everything client-side will refer to the deviceID string you assign to each device, so balance these between descriptive and concise.

Running

You will need a Pyro4 nameserver running somewhere on your network. The runNameserver.sh script will take care of this for you, or use the scripts/etc/systemd/pyro4-nsd.service systemd script to install as a system service. Systems still running initd can use scripts/etc/init.d/pyro-nsd.

The runController.py script will start a Controller instance and register it with the Pyro4 nameserver, making it available to all machines on your network. By default it will load a config.json configuration file, or whatever you specify with -c on the commandline. Installing via pip/easy_install will generate an avx-controller script which is run in the same way.

The controller machine can also use the scripts/etc/systemd/avx-controller.service systemd script or scripts/etc/init.d/avx-controller init script to run the controller as a daemon.

Configuring IP address

By default avx will use the first IP address printed by hostname -I to register with the nameserver. If you would like to use a different IP address (e.g. for a different network adapter) you can set the PYRO_IP environment variable, and that value will be used instead.

On systems without hostname, or where hostname -I does not produce the required output, you should use the PYRO_IP environment variable.

Using the HTTP interface

There's a basic HTTP interface built in. To enable it, ensure you have the following in your config file ('options' should be a sibling of 'devices'):

  "options" : {
    "http" : true
  }

In addition, each device must have an httpAccessible option set to true for it to be accessible via the HTTP interface.

By default the HTTP server will listen on port 8080 (currently hardcoded).

The URL scheme to call methods is:

http://server:8080/deviceID/method/option,option...

For example,

http://server:8080/Main/sendInputToOutput/2,1

will tell the video switcher with ID "Main" to send input 2 to output 1.

The controller will respond with an appropriate HTTP response code:

  • 200 - OK (followed by whatever data is returned by that method)
  • 400 - no such method
  • 403 - not permitted to call methods on that device over HTTP
  • 404 - no such device

Logging

Starting the controller with a commandline flag of -d or --debug will enable debugging messages.

A custom Python logging configuration may be provided in the controller config file. If the key logging is present in the config, then its contents will be passed directly to logging.config.dictConfig.

Using the -d flag when such a configuration is specified will overwrite the default logger's level to DEBUG but leave other loggers unchanged.

Supported Devices

Currently the devices best supported include:

  • Blackmagic Design ATEM video switchers
  • Blackmagic Design HyperDeck Studio recorders
  • Kramer video switchers supporting Protocol 2000 over serial
    • e.g. VP-88
  • Kramer 602 (non-Protocol 2000)
  • Inline 3080 video switcher
  • Kramer VP70x scan converters
  • Coriogen Eclipse scan converter
  • Sony VISCA PTZ cameras
  • Datavideo PTC-150 PTZ camera
  • ETC Unison lighting controller
  • Several models of USB relay cards
  • Philips amBx ambient lighting system
  • MiLight / easybulb wireless bulbs
  • Tivo (experimental)

In many cases support is partial but straightforward to improve - patches welcome!

Cross-client communication

avx includes a mechanism for cross-client, and controller-to-client, communication. Clients should override the handleMessage(msgType, source, data) method to handle messages, which are sent via the controller's broadcast method. All messages are broadcast to all currently-connected clients. The arguments to broadcast, which are the same as those to handleMessage, are:

  • msgType: string representing the type of message. Built-in message types are defined in avx.Client.MessageTypes or device-specific classes but client implementations are free to specify their own strings as required.
  • source: the origin of this message. When called from devices, this will be the device ID of the device that calls broadcast. Client implementations may use this field as required.
  • data: the message payload. May be any Python object, or None.

Clients may broadcast messages by calling Controller.broadcast() or by scheduling a BroadcastEvent, for example as part of a macro sequence.

Built-in message types currently include:

  • avx.Client.MessageTypes.OUTPUT_MAPPING: sent by video switcher devices to describe their current output state. source will be the device ID of the switcher. data will be a dict whose keys are the numbered outputs of the switcher, and whose values are the numbered inputs. For example, a switcher currently displaying input 1 on output 4 may send the data

    { 4: 1 }

    Note that the complete state of the switcher may not be represented (a single message may only describe a single output state). Nor is it guaranteed that such a message will automatically be sent when a switcher changes state (the Inline IN3808, for example, only sends its state when asked for).

Changelog

v1.4.0 (tbd)

  • List of connected clients is no longer written to the config file, but instead to its own state file under /var/lib/avx/.
  • Added ATEM functions for upstream keyers and Super Source
  • Added "synthetic" tally for ATEM switcher giving sources per M/E bus

v1.3.1 (2018-12-02)

  • Fixed Hyperdeck functionality.

v1.3 (2018-11-21)

  • Added support for Datavideo PTC-150 network DVIP control (VISCA-over-ethernet).

v1.2.0 (2017-12-28)

  • Controller will now try to reconnect and reproxy to connected clients if it is restarted.
  • VISCA pan/tilt speeds adjusted for PTC-150
  • Fixes and improvements to Hyperdeck functionality

v1.1.0 (2017-11-29)

  • Added support for Blackmagic Design ATEM video switchers. Functionality is partial and will be expanded in future releases.
  • Added support for Blackmagic Design Hyperdeck Studio recorders. Transport functionality is complete (play, record, skip etc) but configuration is not yet supported.
  • Added support for multiple VISCA cameras via one serial port. Define a VISCAPort in your configuration file and specify a "viscaPort" option against each of your camera devices.
  • Added specific VISCA implementation for Datavideo PTC-150 cameras.
  • Broadcasts are now logged at the DEBUG level rather than the INFO level.
  • broadcast() may now be called without data, which defaults to None.

About

A system for controlling A/V devices such as video switchers via a networkable control device.

Topics

Resources

Stars

Watchers

Forks

Packages

No packages published