更新clone下来的代码 git pull，视频要手动

要装的程序

$ sudo apt-get update

$ sudo apt-get install feh ttf-wqy-zenhei samba-common-bin samba python3-rpi.gpio python3-w1thermsensor $ sudo pip3 install pexpect aiohttp aiohttp_jinja2

禁用屏保和休眠 $ sudo leafpad /etc/lightdm/lightdm.conf 行xserver-command=X -s o -dpms

samba文件共享 $ sudo leafpad /etc/samba/smb.conf [homes]段 browseable = yes

read only = no create mask = 0755 directory mask = 0755

增加samba用户 sudo smbpasswd -a pi 输入两次密码，重启

开机运行Python脚本 sudo pcmanfm 复制desktop文件到 /home/pi/.config/autostart

设定有线固定IP，设置中文，设置时区，设置背景,关闭设置里接口，开启1-wire

HDMI输出声音 $ sudo leafpad /boot/config.txt 里面设置HDMI_DRIVER=2,参数是：-o hdmi /boot/config.txt添加下面 dtoverlay=w1-gpio-pullup,gpiopin=4

image 和 imagetmb 增加图片 image 900810 imagetmb 220220

文件名：A_B_C_D_E.jpg A 类别 ; B 排序,大图文件名; C时间（秒）; D 视频文件名（视频要mp4结尾）; E urlencode后的中文菜名 .jpg(或png，要统一)

setting.txt : time1 time2up time3dw time4

#file_object=open('p:/fse.txt','r')    # r只读，w可写，a追加
#for line in file_object:
     #print(line)
#file_object.close()

chromium

sudo leafpad /etc/apt/sources.list

复制add以下地址

deb http://mirrors.tuna.tsinghua.edu.cn/raspbian/raspbian/ wheezy main contrib non-free rpi deb-src http://mirrors.tuna.tsinghua.edu.cn/raspbian/raspbian/ wheezy main contrib non-free rpi deb http://mirrors.neusoft.edu.cn/raspbian/raspbian/ wheezy main contrib non-free rpi deb-src http://mirrors.neusoft.edu.cn/raspbian/raspbian/ wheezy main contrib non-free rpi deb http://mirrors.ustc.edu.cn/raspbian/raspbian/ wheezy main contrib non-free rpi deb-src http://mirrors.ustc.edu.cn/raspbian/raspbian/ wheezy main contrib non-free rpi

sudo apt-get install chromium-browser chromium-l10n

chromium-l10n这是中文语言包 In order to have a better display you can also install MC core fonts using

sudo apt-get install ttf-mscorefonts-installer

可以直接在图形界面设置固定IP

设定有线即可 sudo leafpad /etc/network/interfaces

iface eth0 inet static

address 192.168.1.105 netmask 255.255.255.0 gateway 192.168.1.1