def test_generate_ca_sequence(self):
"""
Test Case #1
Check return type
"""
result = type(CA.generate_ca_sequence(30, 1, 1, 8, 10))
self.assertTrue(result is list)
"""
Test Case #2
Check for correct values
"""
result = CA.generate_ca_sequence(30, 1, 1, 8, 10)
expected = [1, 1, 0, 1, 1, 1, 0, 0, 1, 1, 1]
self.assertEqual(result, expected)
"""
Test Case #3
Check for length
"""
result = len(CA.generate_ca_sequence(30, 1, 1, 8, 1))
expected = 2 # number generations + 1 (zero indexing)
self.assertEqual(result, expected)
"""
Test Case #4
Check for edge case
"""
result = len(CA.generate_ca_sequence(30, 1, 1, 8, 0, 1))
expected = 1 # number of generations + 1 (zero indexing)
self.assertEqual(result, expected)
def Encrypt(bytes:list, seed, steps:int):
global seedlen, debug
assert len(seed) > 20
CA.r_initCA(seed, steps) #Start up the CA with the specified seed and steps
m_data = bytes[:]
m_head = 0
ca_m_head = 4
ca_enc_head = len(seed) // 2 - 4
d = dlast = []
while (CA.steps <= 0):
dlast = d
d = CA.update()
if (d[ca_m_head] == 1):
m_head += 1
if (m_head >= len(m_data)):
m_head = 0
else:
pass #don't move m_head
b = "0b"
r = d.range()
for i in range(r[0] + ca_enc_head, r[0] + ca_enc_head + 8):
b += str(d[i])
m_data[m_head] = m_data[m_head] ^ int(b, 2)
DumpCurrentRow(CA.steps, m_head, m_data, ca_m_head, d, b)
#debug.write("\n\n\n")
return m_data
def test_make_config(self):
"""
Test Case #1
Check for correct return type
"""
result = type(CA.make_config(30, 1))
self.assertTrue(result is list)
"""
Test Case #2
Check for correct values
"""
result = CA.make_config(30, 8)
expected = [0, 1, 1, 1, 1, 0, 0, 0]
self.assertEqual(result, expected)
"""
Test Case #3
Check for correct length
"""
result = len(CA.make_config(30, 8))
expected = 8
self.assertEqual(result, expected)
"""
Test Case #4
Test edge case
"""
result = CA.make_config(0, 8)
expected = [0, 0, 0, 0, 0, 0, 0, 0]
expected = expected[::-1]
self.assertEqual(result, expected)
def test_dec_to_bin(self):
"""
Test Case #1
Check return type
"""
result = type(CA.dec_to_bin(8, 4))
self.assertTrue(result is list)
"""
Test Case #2
Check for expected value
Values are ordinal so they need to be reversed
"""
result = CA.dec_to_bin(8, 4)
expected = [1, 0, 0, 0]
expected = expected[::-1] # reversed
self.assertEqual(result, expected)
"""
Test Case #3
Check for edge case
"""
result = CA.dec_to_bin(0, 4)
expected = [0, 0, 0, 0]
expected = expected[::-1] # reversed
self.assertEqual(result, expected)
"""
Test Case #3
Check for edge case
"""
result = CA.dec_to_bin(15, 4)
expected = [1, 1, 1, 1]
expected = expected[::-1] # reversed
self.assertEqual(result, expected)
def test_make_rule_table(self):
"""
Test Case #1
Check return type
"""
result = type(CA.make_rule_table(30, 1))
self.assertTrue(result is list)
"""
Test Case #2
Check rule 30 for correct value
"""
result = CA.make_rule_table(30, 1)
expected = [0, 1, 1, 1, 1, 0, 0, 0]
self.assertEqual(result, expected)
"""
Test Case #3
Check for correct length
"""
result = CA.make_rule_table(30, 1)
expected = 8
result_len = len(result)
self.assertEqual(result_len, expected)
"""
Test Case #4
Check for edge case
"""
result = CA.make_rule_table(0, 1)
expected = 8 # default bits are equal to 8
result_len = len(result)
self.assertEqual(result_len, expected)
def train():
features = []
train = []
keys = {}
with open('train.csv', 'r') as dataset:
for x, i in enumerate(next(dataset).split(',')):
keys[i] = x # Initialize list of feature names
features = ([
next(dataset).strip('\n').replace(' ', '').split(',')
for x in range(35000)
])
#Way too messy
dataset.close()
for i in range(len(features)):
train.append(features[i].pop())
#Remove unwanted data
keep_list = [] #Only keep data points where room was booked
for i in range(len(features)):
if features[i][keys['is_booking']] == '1':
keep_list.append(i)
features = [features[i] for i in keep_list]
train = [train[i] for i in keep_list]
remove = ['date_time', 'srch_ci', 'srch_co', 'cnt']
features = zip(*features)
rem_list = []
for i in remove:
rem_list.append(keys[i])
for i in features:
if '' in i:
rem_list.append(features.index(i)) #Deal with nulls later
features = [features[i] for i in range(len(features)) if i not in rem_list]
features = zip(*features)
#Make CDT
CDT, feature_order, cluster_order = CA.make_CDT(features, train)
#Run MCA
u_p, lambda_s, u, chi_sq, psi_sq = CA.MCA(CDT)
#Project clusters onto principal axes
cluster_proj = CA.projections(CDT, u)
return cluster_proj, u, feature_order
def train():
features=[]
train=[]
keys={}
with open('train.csv','r') as dataset:
for x, i in enumerate(next(dataset).split(',')):
keys[i]=x # Initialize list of feature names
features=( [ next(dataset).strip('\n').replace(' ', '').split(',') for x in range(35000) ] )
#Way too messy
dataset.close()
for i in range(len(features)):
train.append(features[i].pop())
#Remove unwanted data
keep_list=[] #Only keep data points where room was booked
for i in range(len(features)):
if features[i][keys['is_booking']] == '1':
keep_list.append(i)
features=[ features[i] for i in keep_list ]
train=[ train[i] for i in keep_list ]
remove=['date_time','srch_ci','srch_co','cnt']
features = zip(*features)
rem_list=[]
for i in remove:
rem_list.append(keys[i])
for i in features:
if '' in i:
rem_list.append(features.index(i)) #Deal with nulls later
features =[ features[i] for i in range(len(features)) if i not in rem_list ]
features = zip(*features)
#Make CDT
CDT, feature_order, cluster_order = CA.make_CDT(features, train)
#Run MCA
u_p, lambda_s, u, chi_sq, psi_sq = CA.MCA(CDT)
#Project clusters onto principal axes
cluster_proj = CA.projections(CDT, u)
return cluster_proj, u, feature_order
def read_initial_ensemble(self, init_ensemble_file):
'''
read_init_ensemble, takes an input file (.txt) of numbers and converts those to configurations
ARGS:
init_ensemble, a file object containing configurations being used as the initial configurations in the experiment
first line should be configuration length
RETURNS:
'''
#reset the ensemble since it is going to be whatever is in the file
self.init_ensemble = []
temp_ensemble = []
f = init_ensemble_file.readlines()
#the first line should be the configuration length
config_length_to_use = f[0]
#set the configuration length of the object
self.config_length = config_length_to_use
for i in range(1, len(f)):
#first get the config number
config_num = int(f[i])
config_to_add = CA.make_config(config_num, config_length_to_use)
temp_ensemble.append(config_to_add)
self.set_init_ensemble(temp_ensemble)
def get_ca_weight_4():
rule_nums = []
num_CA = 256
for i in range(0, 256):
rule_table = CA.dec_to_bin(i)
if sum(rule_table) <= len(rule_table) / 2 - 1:
rule_nums.append(i)
return rule_nums
def run_job(self):
result = list()
for i in range(0, len(self.conf_num)):
conf_result = CA.main(self.the_rule_num, self.rule_radius,
self.conf_num, self.conf_length,
self.this_ngens)
result.append(conf_result)
return result
def balanced_three_n_CA():
rule_nums = []
num_CA = 256
for i in range(0, 256):
rule_table = CA.dec_to_bin(i)
if sum(rule_table) == len(rule_table) / 2:
rule_nums.append(i)
return rule_nums
def CAplot(rule, n, initiate):
ca = CA.CA(rule, n)
if initiate == "single":
ca.start_single()
else:
ca.start_random()
ca.loop(n - 1)
drawer = CADrawer.PyplotDrawer()
drawer.draw(ca)
def createGlassesTree(filename, debug=False):
fr = open(filename)
lences = [inst.strip().split('\t') for inst in fr.readlines()]
lencesLabels = ['age', 'prescript', 'astigmatic', 'tearRate']
if (debug):
print "lences = %s, lencesLabels = %s" % (lences, lencesLabels)
# 等价于 for inst in fr.readline() lences = [inst.strip().split('\t')]
lencesTree = CA.createTree(lences, lencesLabels, None)
return lencesTree
def test_bin_to_dec(self):
"""
Test Case #1
Check to see if return type is int and correct value
"""
expression = [1, 0, 0, 0]
expression = expression[::-1] # reverse ordinal value
result = CA.bin_to_dec(expression)
expected = 8
self.assertTrue(type(result is int))
self.assertEqual(result, expected)
"""
Test Case #2
Check to see if return type is int and correct value
"""
expression = "0000"
expression = expression[::-1] # reverse ordinal value
result = CA.bin_to_dec(expression)
expected = 0
self.assertTrue(type(result is int))
self.assertEqual(result, expected)
"""
Test Case #3
Check for length
"""
expression = "1111"
expression = expression[::-1] # reverse ordinal value
result = CA.bin_to_dec(expression)
expected = 15
self.assertEquals(result, expected)
"""
Test Case #4
Check for non-integer values
"""
result = "AAAA"
self.assertRaises(ValueError, CA.bin_to_dec, result)
"""
Test Case #5
Check for non-valid types such as none
"""
result = None
self.assertRaises(TypeError, CA.bin_to_dec, result)
def test_evolve_one_step(self):
"""
Test Case #1
Rule 30 evolved over 1 generation
"""
rule_table = CA.make_rule_table(30, 1)
rule_30 = CA.evolve_one_step(rule_table, [1, 0, 0, 0, 0, 0, 0, 0])
expected = [1, 1, 0, 0, 0, 0, 0, 1]
self.assertEqual(rule_30, expected)
"""
Test Case #2
Rule 90 evolved over 1 generation
"""
rule_table = CA.make_rule_table(90, 1)
rule_90 = CA.evolve_one_step(rule_table, [1, 0, 0, 0, 0, 0, 0, 0])
expected = [0, 1, 0, 0, 0, 0, 0, 1]
self.assertEqual(rule_90, expected)
"""
Test Case #3
Rule 184 evolved over 1 generation
"""
rule_table = CA.make_rule_table(184, 1)
rule_184 = CA.evolve_one_step(rule_table, [1, 0, 0, 0, 0, 0, 0, 0])
expected = [0, 0, 0, 0, 0, 0, 0, 1]
self.assertEqual(rule_184, expected)
"""
Test Case #4
Rule 102 evolved over 1 generation
"""
rule_table = CA.make_rule_table(102, 1)
rule_102 = CA.evolve_one_step(rule_table, [1, 0, 0, 0, 0, 0, 0, 0])
expected = [1, 1, 0, 0, 0, 0, 0, 0]
self.assertEqual(rule_102, expected)
"""
Test Case #5
Rule 222 evolved over 1 generation
"""
rule_table = CA.make_rule_table(222, 1)
rule_222 = CA.evolve_one_step(rule_table, [1, 0, 0, 0, 0, 0, 0, 0])
expected = [1, 1, 0, 0, 0, 0, 0, 1]
self.assertEqual(rule_222, expected)
def set_rule(self, rule_list):
'''
set_rule_list, sets the rules in the rule_list
ARGS:
rule_list, a list of CA rules to use in the experiment
RETURNS:
'''
self.rule = rule_list
self.rule_number = CA.bin_to_dec(rule_list)
def test_evolve(self):
"""
Test Case #1
Rule 30 evolved over 1 radius of length 8 for 4 generations
"""
rule_30 = CA.evolve(30, 1, 1, 8, 4)
expected = [1, 0, 0, 1, 0, 0, 0, 0]
self.assertEqual(rule_30[4], expected)
"""
Test Case #2
Rule 90 evolved over 1 radius of length 8 for 4 generations
"""
rule_90 = CA.evolve(90, 1, 1, 8, 3)
expected = [0, 1, 0, 1, 0, 1, 0, 1]
self.assertEqual(rule_90[3], expected)
"""
Test Case #3
Rule 184 evolved over 1 radius of length 8 for 4 generations
"""
rule_184 = CA.evolve(184, 1, 1, 8, 3)
expected = [0, 0, 0, 0, 0, 1, 0, 0]
self.assertEqual(rule_184[3], expected)
"""
Test Case #4
Rule 102 evolved over 1 radius of length 8 for 4 generations
"""
rule_102 = CA.evolve(102, 1, 1, 8, 3)
expected = [1, 1, 1, 1, 0, 0, 0, 0]
self.assertEqual(rule_102[3], expected)
"""
Test Case #5
Rule 222 evolved over 1 radius of length 8 for 4 generations
"""
rule_222 = CA.evolve(222, 1, 1, 8, 3)
expected = [1, 1, 1, 1, 0, 1, 1, 1]
self.assertEqual(rule_222[3], expected)
def process_jobs(self):
for file_name in os.listdir(self.job_directory):
print(self.get_time() + "Processing job file " + str(file_name) +
"...")
with open(self.job_directory + file_name, 'r') as file:
file_base_name = os.path.splitext(file_name)[0]
results = list()
indexes = list()
header = list()
result_len = 0
generation_len = 0
"""
Calculate results for each line
"""
for line in file:
args = [int(s) for s in line.split()]
r = CA.main(args[0], args[1], args[2], args[3], args[4])
r = [val for sublist in r for val in sublist]
results.append(r)
indexes.append(args[2])
if args[3] > result_len:
result_len = args[3]
if args[4] > generation_len:
# add one for zero based indexing
generation_len = args[4]+1
"""
Construct header
"""
for i in range(0, generation_len):
for j in range(0, result_len):
header.append("x" + str(j) + "t" + str(i))
"""
Construct data frame
"""
df = pd.DataFrame(results, columns=header, index=indexes)
"""
Write data frame to CSV
"""
self.write_job_csv(file_base_name, df)
def run_experiment(self):
'''
run_experiment, creates a list of spacetime diagrams for a set of rules and initial configurations
ARGS: func, a function to add
RETURNS: data_log, a list of space-time diagrams for these initial configurations
'''
rule_to_use = self.rule
radius_to_use = self.radius
init_ensemble_to_use = self.init_ensemble
data_log = []
for config in init_ensemble_to_use:
data = CA.evolve(rule_to_use, self.rule_radius, config,
self.config_length, self.num_generations)
data_log.append(data)
#now we log the measurements, determined by functions
temp_measurement_log = pd.DataFrame(columns=self.var_list,
index=arange(0, len(data_log)))
#loop over each spacetime diagram in the experiment log
#create counter for data frame location (row number)
i = 0
for diagram in data_log:
#create a row with necessary information for header
#this could probably be handled better.
row_to_add = []
#for each function, evaluate it on the diagram
for func in self.func_list:
data_to_add = func(diagram)
#check to see how to add it on
if data_to_add is list:
row_to_add = row_to_add + data_to_add
else:
row_to_add.append(data_to_add)
#add the row to the data set
temp_measurement_log.loc[i] = row_to_add
#increment the variable to keep the row index correct
i = i + 1
self.measurement_log = temp_measurement_log
return temp_measurement_log
import CA
import test_strings
BLOCK_SIZE = 16
IV = '\x00' * BLOCK_SIZE
key = test_strings.YS
ciphertext = CA.open_strip('10.txt').decode('base64')
print(CA.ecb_decrypt(ciphertext, key, IV))
plain = 'aosentuhasocreuhrsacoheurscahoerucarcouh'
cipher = CA.ecb_encrypt(plain, key, IV)
print(CA.ecb_decrypt(cipher, key, IV))
#Bring in the training data
print 'training'
cluster_proj, u, feature_order = train.train()
print 'training complete'
#Begin outer for loop to go through massive file
start = 0
for start in range(0, 2528244, 50000):
begin = time.time()
features, identifiers = exp_io.import_data(start)
#Project new data onto vector space
obs_proj = []
for f in features:
m = CA.CDT_map(f, feature_order)
opt_vec, vec_idx, overlap, overlaps = CA.max_proj(u, m)
obs_proj.append(overlaps)
#Determine best fit between observations and cluster projections
results = {}
for i in range(len(obs_proj)):
clust_idx = 0
dots = []
max_dots = 0
for j in range(len(cluster_proj)):
curr_dot=np.dot(obs_proj[i]/np.linalg.norm(obs_proj[i]), \
cluster_proj[j]/np.linalg.norm(cluster_proj[j]))
dots.append(curr_dot)
for i in range(0, n):
b = ''.join(choice(['0', '1']) for _ in range(l))
print(b)
bit_list.append(b)
for bs in bit_list:
print(bs, end='\n')
print()
# Step 2) For each bit string, evolve over g generations]
print("Step 2\n===")
print("Evolving each bit strings over " + str(ca_generations) + " generations")
print("Result: ")
results = []
for bs in bit_list:
bs = CA.bin_to_dec(bs)
r = CA.evolve(ca_rule, ca_radius, bs, ca_config_len,
ca_generations)
r = [y for x in r for y in x]
results.append(r)
print(r, end='\n\n')
# Step 3) Create data frame from results
print("Step 3\n===")
print("Data Frame of Results")
for i in range(0, l):
for j in range(0, ca_generations+1):
s = ("x" + str(j) + "t" + str(i))
ca_df_headers.append(s)
ca_df = pd.DataFrame(results, columns=ca_df_headers, index=bit_list)
def config_density_change(orbit):
init_density = CA.config_density(orbit[0])
final_density = CA.config_density(orbit[-1])
density_change = final_density - init_density
return density_change
def init_config_density(orbit):
init_density = CA.config_density(orbit[0])
return init_density
def Decrypt(bytes:list, seed, steps:int):
assert len(seed) > 20
CA.r_initCA(seed, steps) #Start up the CA with the specified seed and steps
m_data = bytes[:]
m_head = 0
ca_m_head = 4
ca_enc_head = len(seed) // 2 - 4
d = dlast = []
while (CA.steps <= 0):
dlast = d
d = CA.update()
if (d[ca_m_head] == 1):
m_head += 1
if (m_head >= len(m_data)):
m_head = 0
else:
pass #don't move m_head
debug.write("mhead: " + str(m_head) + "\tdelta mhead: " + str(d[ca_m_head]) + "\n")
#debug.write("\n\n\n")
CA.rows = [d, dlast]
CA.steps = -steps
#CA.init() # starts the pygame window
##Todo: refactor these two runs into the below code to maximize reuse
for n in (d, dlast):
dH = 0
#CA.update_screen(d) # updates the pygame window
if (n[ca_m_head] == 1):
dH = -1
if (m_head < 0):
m_head = len(m_data) - 1
else:
dH = 0
b = "0b"
r = n.range()
for i in range(r[0] + ca_enc_head, r[0] + ca_enc_head + 8):
b += str(n[i])
m_data[m_head] = m_data[m_head] ^ int(b, 2)
m_head += dH
#debug.write("d\t")
DumpCurrentRow(CA.steps, m_head, m_data, ca_m_head, d, b)
while (CA.steps <= -2):
dH = 0
d = CA.update()
#CA.update_screen(d) # updates the pygame window
if (d[ca_m_head] == 1):
dH = -1
if (m_head < 0):
m_head = len(m_data) - 1
else:
dH = 0
b = "0b"
r = d.range()
for i in range(r[0] + ca_enc_head, r[0] + ca_enc_head + 8):
b += str(d[i])
m_data[m_head] = m_data[m_head] ^ int(b, 2)
m_head += dH
DumpCurrentRow(CA.steps, m_head, m_data, ca_m_head, d, b)
#debug.close()
return m_data
[1, 1, 'yes'],
[1, 0, 'no'],
[0, 1, 'no'],
[0, 1, 'no']
]
labels = ['no surfacing', 'flippers']
#labels = ['flippers', 'no surfacing'];
return dataSet, labels
''''' ps:
list是可变类型, 无法进行hash, tuple就可以解决这个问题
'''
dataSet, labels = createDataSet()
print "dataSet = %s, column count = %s" % (dataSet, len(dataSet[0]))
print CA.calcShannonEnt(dataSet)
def printCallback(featVec, reducedFeatVec, featVec_t):
print "featVec = %s, reducedFeatVec = %s, featVec[axis + 1 :] = %s" % (
featVec, reducedFeatVec, featVec_t)
print "============ >>> start 数据划分方式 ==================="
print CA.splitDataSet(dataSet, 0, 1, printCallback)
print CA.splitDataSet(dataSet, 0, 0, printCallback)
print "============ >>> start 最好的数据划分方式 ================="
# this line just for test invalid dataSet = [[1, 'yes'], [1, 'yes'], [0, 'no'], [0, 'no']];
features = CA.chooseBestFeatureToSplit(dataSet, printCallback)
print "features = ", features # result 1 means 按照index =1的特征划分。 也就是第2列特征分组
for j in range(len(cells[i])):
if [i, j] not in input_data:
test_inputs.append([i, j])
targets.append([cells[i][j]])
return torch.Tensor(np.array(input_data)), torch.Tensor(np.array(output_data)), torch.Tensor(np.array(test_inputs)), torch.Tensor(np.array(targets))
def display_results(x, y):
plt.plot(x, y)
plt.show()
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
Main
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
if __name__ == "__main__":
ca = CA(N, N)
for i in range(1000):
ca.generate()
if SHOW_MAP:
plt.imshow(ca.get_cells(), cmap=plt.cm.gray, interpolation='nearest')
plt.pause(0.01)
if ca.check_for_stability():
plt.title("Stable")
plt.imshow(ca.get_cells(), cmap=plt.cm.gray, interpolation='nearest')
plt.show()
print("Generation: {}".format(i))
break
train_x, train_y, test_x, test_y = get_testing_data(ca.get_cells())
runs = []
import CA
plain = 'aoeuaoeuaoeuaoeuaoeuaoeuaoeuaoeuaoeuaoeuaoeuaoeuaoeuaoeuaoeuaoeuaoeuaoeuaoeuaoeuaoeu'
ciphertext = CA.encryption_oracle(plain)
#print(ciphertext)
result = CA.repeated_blocks(ciphertext)
if result:
print('ecb')
print 'training'
cluster_proj, u, feature_order = train.train()
print 'training complete'
#Begin outer for loop to go through massive file
start=0
for start in range(0,2528244,50000):
begin=time.time()
features, identifiers = exp_io.import_data(start)
#Project new data onto vector space
obs_proj=[]
for f in features:
m = CA.CDT_map(f, feature_order)
opt_vec, vec_idx, overlap, overlaps = CA.max_proj(u, m)
obs_proj.append(overlaps)
#Determine best fit between observations and cluster projections
results={}
for i in range(len(obs_proj)):
clust_idx=0
dots=[]
max_dots=0
for j in range(len(cluster_proj)):
curr_dot=np.dot(obs_proj[i]/np.linalg.norm(obs_proj[i]), \
cluster_proj[j]/np.linalg.norm(cluster_proj[j]))
dots.append(curr_dot)
if curr_dot > max_dots:
def calc(self, e=1):
e = int(self.entry.get())
self.result.delete(0,END)
self.result.insert(END,CA.coterminal(e))
import CA
from numpy.random import binomial
import matplotlib.pyplot as plt
def life_game_rule(k):
cur = k[len(k)/2]
t = (k==1).sum() - cur
return (cur == 1 and int(t==2 or t==3)) or (cur != 1 and int(t==3))
if __name__ == '__main__':
simulator = CA.CA(binomial(1, 0.15, (20, 40)), 1, life_game_rule, circular = True)
plt.ion()
simulator.plot()
raw_input('sizing')
iter = 0
while iter < 1000:
plt.clf()
simulator.update()
simulator.plot()
plt.draw()
import socket
import CA
from AESCipher import AESCipher
s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
server = '127.0.0.1'
port = 9500
s.connect((server, port))
#gets a certificate from the server
server_cert = s.recv(1024)
#The if function is checking to see if the certificate received by the server is known by CA. If it is known,
#a message will be encrypted and sent
if CA.knownCert(server_cert) == server_cert:
key = CA.getPublicKey()
cipher = AESCipher(key)
message = cipher.encrypt('I guess we know each other.')
s.send(message)
server_message = s.recv(1024)
print(cipher.decrypt(server_message))
s.close()
#A certificate that is not known will instead send a message of 'goodbye' and the connection is closed
else:
farewell = 'goodbye'
s.send(farewell.encode())
s.close()
return 1.0
#2.0,3.0 funny pattern
else:
return cur / 2.0
# return cur/2.000000001
#tipping point, 2.0 -> grid, little more? no grid
else:
if 3 <= t < 4:
return 1.
else:
return 0.
if __name__ == '__main__':
img = array(
I.open('Pics/building.jpg').resize((36 * 5, 48 * 5)).convert('L'))
img = img / float(img.max())
simulator = CA.CA(img, radius=1, rule=life_game_rule)
plt.ion()
simulator.plot()
raw_input('sizing')
iter = 0
while iter < 1000:
plt.clf()
simulator.update()
simulator.plot()
plt.draw()
# raw_input('pause')
#This is a working proof of concept for the CAExperiment class
#Lots of stuff to add/improve
from CAExperimentClass import *
import CA
CAExA1 = CAExperiment()
CAExA1.set_label("A1")
#create Wolfram Rule 30
wolfram_rule30_table = CA.make_rule_table(30,1)
CAExA1.set_rule(wolfram_rule30_table)
CAExA1.set_radius(1)
#randomly generate an initial ensemble of 100 configurations of length 100
our_init_ensemble = CA.random_initial_ensemble(100,100)
CAExA1.set_init_ensemble(our_init_ensemble)
#CAExA1.set_config_length(100)
#set the number of generations
CAExA1.set_num_generations(10)
#define the functions whose measurements we want to take.
#typically these would be written in a separate module rather than
#being done in the experiment file
def rule_num(orbit):
return 30
from CA import *
from CADrawer import *
# for i in xrange(256):
rule = 110
n = 300
ca = CA(rule, n)
ca.start_comp()
# ca.start_random()
ca.loop(n-1)
drawer = PyplotDrawer()
drawer.draw(ca)
drawer.show()
raw_input('')
def init_config_num(orbit):
return CA.bin_to_dec(orbit[0])
