def wait_routine(state):
global mode
if state != "STATE 3":
error = "Error 5502" # Send error 5521 to chamber control
READ_ERROR_TXT.read_error_txt(error)
STATE_4.state_4() #Go to State 4 : Safe State
elif mode == "LOCAL":
error = "Error 5521" # Send error 5521 to chamber control
READ_ERROR_TXT.read_error_txt(error)
LOCAL.local()#Exit automatic sequence
def state_0(self):
global state, command, mode
print "STATE 0 : VENTED CHAMBER\n"
LCD_DISPLAY.main("STATE 0") # Display LCD : STATE 0
# Update command log
state = "STATE 0"
command = "VC_vent"
# Stop Data acquisition
# Data acquisition automatically stopped when COMMAND = "STATE 0"
while state == "STATE 0":
while command == "VC_vacuum": # Receive command
if state == "STATE 1":
STATE_1.State1.state_1()
elif mode == "LOCAL":
error = "Error 5521" # Send error 5521 to chamber control
READ_ERROR_TXT.read_error_txt(error)
LOCAL.local() # Exit Remote sequence
print "REMOTE MODE EXIT"
def error_1():
global mode, remote
global free_memory
if mode == "REMOTE": # Remote or Local ?
if PRESSURE_CONTROL_SOFT == 1:
if remote == "AUTOMATIC":
if CHAMBER_CTRL_PROG == "CONNECTED":
if free_memory > 4000000: #Free memory < 4GB
if EMERGENCY == "OFF":
if FUSE == "ON":
if SENSORS_SIGNAL =="ON": # Check if a signal from sensors is received
if SIGNAL == 10 or SIGNAL == 0: # 0 or 10 V
if COMMAND_NEW == 1:
if COMMAND_VALID == 1:
if mode == "LOCAL":
error_2()
else:
error = "Error 5514"
READ_ERROR_TXT.read_error_txt(error)
if mode == "REMOTE":
if GUI == 1:
if remote == "AUTOMATIC":
error = "Error 5515"
READ_ERROR_TXT.read_error_txt(error)
else:
error_2()
else:
error_2()
else:
error = "Error 5513"
READ_ERROR_TXT.read_error_txt(error)
else:
error = "Error 5518"
READ_ERROR_TXT.read_error_txt(error)
else:
error = "OK"
READ_ERROR_TXT.read_error_txt(error)
else:
error = "Error 5509"
READ_ERROR_TXT.read_error_txt(error)
else:
error = "Error 5508"
READ_ERROR_TXT.read_error_txt(error)
else:
error = "Error 5512"
READ_ERROR_TXT.read_error_txt(error)
else:
error = "Error 5501"
READ_ERROR_TXT.read_error_txt(error)
elif free_memory < 1000: #Free memory < 1MB:
error = "Error 5520"
READ_ERROR_TXT.read_error_txt(error)
else:
error = "Error 5519"
READ_ERROR_TXT.read_error_txt(error)
else:
error = "Error 5517"
READ_ERROR_TXT.read_error_txt(error)
else:
error = "Error 5516"
READ_ERROR_TXT.read_error_txt(error)
def error_2():
# global command, error
# global p1, p2, p3
# global vv
if command == "STATE 1": # Establish vacuum ?
p1_0 = p1
p2_0 = p2
time.sleep(1)
p1_1 = p1
p2_1 = p2
if (p1_1 < p1_0) and (p2_1 < p2_0): # Pressure decreasing ?
error = "OK"
READ_ERROR_TXT.read_error_txt(error)
else:
p1_3 = p1
p2_3 = p2
if p1_3 <= ....................
if p1_3 < 10^(-5) and p2_3 < 10^(-5):
error = "OK"
READ_ERROR_TXT.read_error_txt(error)
elif SIGNAL_to_TMP == 1:
if p1_3 < 10^(-2) and p2_3 < 10^(-2):
error = "Error 5510"
READ_ERROR_TXT.read_error_txt(error)
else:
error = "Error 5504"
READ_ERROR_TXT.read_error_txt(error)
elif p1_3 > 950 and p2_3 > 950: # Check if the pressure is over 950hPa = 950mbar - (atm pressure = 1013hPa) - Max range TPG 300 (1000 hPa)
error = "Error 5505"
READ_ERROR_TXT.read_error_txt(error)
else:
error = "OK"
READ_ERROR_TXT.read_error_txt(error)
elif PP_FUSE == "..........":
error = "Error 5503"
READ_ERROR_TXT.read_error_txt(error)
else:
error = "Error 5510"
READ_ERROR_TXT.read_error_txt(error)
error = "Error 5505"
READ_ERROR_TXT.read_error_txt(error)
else:
error = "OK"
READ_ERROR_TXT.read_error_txt(error)
elif PP_FUSE == "..........":
error = "Error 5503"
READ_ERROR_TXT.read_error_txt(error)
else:
error = "Error 5510"
READ_ERROR_TXT.read_error_txt(error)
elif command == "STATE 3": # Vent the chamber ?
p1_0 = p1
p2_0 = p2
time.sleep(1)
p1_1 = p1
p2_1 = p2
if (p1_1 > p1_0) and (p2_1 > p2_0): # Check if Pressure rising ?
error = "OK"
elif vv == 1: # Check if vv open ?
error = "Error 5507"
READ_ERROR_TXT.read_error_txt(error)
else:
error = "Error 5506"
READ_ERROR_TXT.read_error_txt(error)
else:
error = "Error 5502"
READ_ERROR_TXT.read_error_txt(error)
with open ("data.txt", "r") as myfile:
data=myfile.read().replace('\n', '')
