def __init__(self, parent):
		self._parent = parent
		self._result = None
		self._enabled = False
		self._singleLayer = False
		self._gcodeLoadProgress = 0
		self._resultLock = threading.Lock()
		self._layerVBOs = []
		self._layer20VBOs = []

		self.layerSelect = openglGui.glSlider(self._parent, 10000, 1, 1, (-1,-2), lambda : self._parent.QueueRefresh())
		self.singleLayerToggle = openglGui.glButton(self._parent, 23, _("Single Layer"), (-1,-1.5), self.OnSingleLayerToggle, 0.5) #stay half size of the base size
Beispiel #2
0
    def __init__(self, parent):
        self._parent = parent
        self._result = None
        self._enabled = False
        self._singleLayer = False
        self._gcodeLoadProgress = 0
        self._resultLock = threading.Lock()
        self._layerVBOs = []
        self._layer20VBOs = []

        self.layerSelect = openglGui.glSlider(
            self._parent, 10000, 1, 1, (-1, -2),
            lambda: self._parent.QueueRefresh())
        self.singleLayerToggle = openglGui.glButton(
            self._parent, 27, _("Single Layer"), (-1.1, -1.4),
            self.OnSingleLayerToggle, 0.75)  #stay at 75% size of the base size
Beispiel #3
0
	def __init__(self, parent):
		super(previewPanel, self).__init__(parent,-1)
		
		self.SetBackgroundColour(wx.SystemSettings.GetColour(wx.SYS_COLOUR_3DDKSHADOW))
		self.SetMinSize((440,320))

		self.objectList = []
		self.errorList = []
		self.gcode = None
		self.objectsMinV = None
		self.objectsMaxV = None
		self.objectsBoundaryCircleSize = None
		self.loadThread = None
		self.machineSize = util3d.Vector3(profile.getPreferenceFloat('machine_width'), profile.getPreferenceFloat('machine_depth'), profile.getPreferenceFloat('machine_height'))
		self.machineCenter = util3d.Vector3(self.machineSize.x / 2, self.machineSize.y / 2, 0)

		self.glCanvas = PreviewGLCanvas(self)
		#Create the popup window
		self.warningPopup = wx.PopupWindow(self, flags=wx.BORDER_SIMPLE)
		self.warningPopup.SetBackgroundColour(wx.SystemSettings.GetColour(wx.SYS_COLOUR_INFOBK))
		self.warningPopup.text = wx.StaticText(self.warningPopup, -1, 'Reset scale, rotation and mirror?')
		self.warningPopup.yesButton = wx.Button(self.warningPopup, -1, 'yes', style=wx.BU_EXACTFIT)
		self.warningPopup.noButton = wx.Button(self.warningPopup, -1, 'no', style=wx.BU_EXACTFIT)
		self.warningPopup.sizer = wx.BoxSizer(wx.HORIZONTAL)
		self.warningPopup.SetSizer(self.warningPopup.sizer)
		self.warningPopup.sizer.Add(self.warningPopup.text, 1, flag=wx.ALL|wx.ALIGN_CENTER_VERTICAL, border=1)
		self.warningPopup.sizer.Add(self.warningPopup.yesButton, 0, flag=wx.EXPAND|wx.ALL, border=1)
		self.warningPopup.sizer.Add(self.warningPopup.noButton, 0, flag=wx.EXPAND|wx.ALL, border=1)
		self.warningPopup.Fit()
		self.warningPopup.Layout()
		self.warningPopup.timer = wx.Timer(self)
		self.Bind(wx.EVT_TIMER, self.OnHideWarning, self.warningPopup.timer)
		
		self.Bind(wx.EVT_BUTTON, self.OnWarningPopup, self.warningPopup.yesButton)
		self.Bind(wx.EVT_BUTTON, self.OnHideWarning, self.warningPopup.noButton)
		parent.Bind(wx.EVT_MOVE, self.OnMove)
		parent.Bind(wx.EVT_SIZE, self.OnMove)
		
		sizer = wx.BoxSizer(wx.VERTICAL)
		sizer.Add(self.glCanvas, 1, flag=wx.EXPAND)
		self.SetSizer(sizer)
		
		self.checkReloadFileTimer = wx.Timer(self)
		self.Bind(wx.EVT_TIMER, self.OnCheckReloadFile, self.checkReloadFileTimer)
		self.checkReloadFileTimer.Start(1000)

		group = []
		self.rotateToolButton = openglGui.glRadioButton(self.glCanvas, 1, 'Rotate', (0,-1), group, self.OnToolSelect)
		self.scaleToolButton  = openglGui.glRadioButton(self.glCanvas, 2, 'Scale', (1,-1), group, self.OnToolSelect)
		self.mirrorToolButton  = openglGui.glRadioButton(self.glCanvas, 12, 'Mirror', (2,-1), group, self.OnToolSelect)

		self.resetRotationButton = openglGui.glButton(self.glCanvas, 4, 'Reset rotation', (0,-2), self.OnRotateReset)
		self.layFlatButton       = openglGui.glButton(self.glCanvas, 5, 'Lay flat', (0,-3), self.OnLayFlat)

		self.resetScaleButton    = openglGui.glButton(self.glCanvas, 8, 'Scale reset', (1,-2), self.OnScaleReset)
		self.scaleMaxButton      = openglGui.glButton(self.glCanvas, 9, 'Scale to machine size', (1,-3), self.OnScaleMax)

		self.mirrorXButton       = openglGui.glButton(self.glCanvas, 12, 'Mirror X', (2,-2), lambda : self.OnMirror(0))
		self.mirrorYButton       = openglGui.glButton(self.glCanvas, 13, 'Mirror Y', (2,-3), lambda : self.OnMirror(1))
		self.mirrorZButton       = openglGui.glButton(self.glCanvas, 14, 'Mirror Z', (2,-4), lambda : self.OnMirror(2))

		self.openFileButton      = openglGui.glButton(self.glCanvas, 3, 'Load model', (0,0), lambda : self.GetParent().GetParent().GetParent()._showModelLoadDialog(1))
		self.sliceButton         = openglGui.glButton(self.glCanvas, 6, 'Prepare model', (1,0), lambda : self.GetParent().GetParent().GetParent().OnSlice(None))
		self.printButton         = openglGui.glButton(self.glCanvas, 7, 'Print model', (2,0), lambda : self.GetParent().GetParent().GetParent().OnPrint(None))

		extruderCount = int(profile.getPreference('extruder_amount'))
		if extruderCount > 1:
			openglGui.glButton(self.glCanvas, 3, 'Load dual model', (0,1), lambda : self.GetParent().GetParent().GetParent()._showModelLoadDialog(2))
		if extruderCount > 2:
			openglGui.glButton(self.glCanvas, 3, 'Load triple model', (0,2), lambda : self.GetParent().GetParent().GetParent()._showModelLoadDialog(3))
		if extruderCount > 3:
			openglGui.glButton(self.glCanvas, 3, 'Load quad model', (0,3), lambda : self.GetParent().GetParent().GetParent()._showModelLoadDialog(4))

		self.scaleForm = openglGui.glFrame(self.glCanvas, (2, -3))
		openglGui.glGuiLayoutGrid(self.scaleForm)
		openglGui.glLabel(self.scaleForm, 'Scale X', (0,0))
		self.scaleXctrl = openglGui.glNumberCtrl(self.scaleForm, '1.0', (1,0), lambda value: self.OnScaleEntry(value, 0))
		openglGui.glLabel(self.scaleForm, 'Scale Y', (0,1))
		self.scaleYctrl = openglGui.glNumberCtrl(self.scaleForm, '1.0', (1,1), lambda value: self.OnScaleEntry(value, 1))
		openglGui.glLabel(self.scaleForm, 'Scale Z', (0,2))
		self.scaleZctrl = openglGui.glNumberCtrl(self.scaleForm, '1.0', (1,2), lambda value: self.OnScaleEntry(value, 2))
		openglGui.glLabel(self.scaleForm, 'Size X (mm)', (0,4))
		self.scaleXmmctrl = openglGui.glNumberCtrl(self.scaleForm, '0.0', (1,4), lambda value: self.OnScaleEntryMM(value, 0))
		openglGui.glLabel(self.scaleForm, 'Size Y (mm)', (0,5))
		self.scaleYmmctrl = openglGui.glNumberCtrl(self.scaleForm, '0.0', (1,5), lambda value: self.OnScaleEntryMM(value, 1))
		openglGui.glLabel(self.scaleForm, 'Size Z (mm)', (0,6))
		self.scaleZmmctrl = openglGui.glNumberCtrl(self.scaleForm, '0.0', (1,6), lambda value: self.OnScaleEntryMM(value, 2))
		openglGui.glLabel(self.scaleForm, 'Uniform scale', (0,8))
		self.scaleUniform = openglGui.glCheckbox(self.scaleForm, True, (1,8), None)

		self.viewSelection = openglGui.glComboButton(self.glCanvas, 'View mode', [0,1,2,3,4], ['3D Model', 'Transparent', 'X-Ray', 'Overhang', 'Layers'], (-1,0), self.OnViewChange)
		self.layerSelect = openglGui.glSlider(self.glCanvas, 0, 0, 100, (-1,-2), self.OnLayerNrChange)

		self.OnViewChange()
		self.OnToolSelect()
		self.returnToModelViewAndUpdateModel()

		self.matrix = numpy.matrix(numpy.array(profile.getObjectMatrix(), numpy.float64).reshape((3,3,)))
Beispiel #4
0
	def __init__(self, parent):
		super(previewPanel, self).__init__(parent,-1)
		
		self.SetBackgroundColour(wx.SystemSettings.GetColour(wx.SYS_COLOUR_3DDKSHADOW))
		self.SetMinSize((440,320))

		self.objectList = []
		self.errorList = []
		self.gcode = None
		self.objectsMinV = None
		self.objectsMaxV = None
		self.objectsBoundaryCircleSize = None
		self.loadThread = None
		self.machineSize = util3d.Vector3(profile.getPreferenceFloat('machine_width'), profile.getPreferenceFloat('machine_depth'), profile.getPreferenceFloat('machine_height'))
		self.machineCenter = util3d.Vector3(self.machineSize.x / 2, self.machineSize.y / 2, 0)

		self.glCanvas = PreviewGLCanvas(self)
		#Create the popup window
		self.warningPopup = wx.PopupWindow(self, flags=wx.BORDER_SIMPLE)
		self.warningPopup.SetBackgroundColour(wx.SystemSettings.GetColour(wx.SYS_COLOUR_INFOBK))
		self.warningPopup.text = wx.StaticText(self.warningPopup, -1, 'Reset scale, rotation and mirror?')
		self.warningPopup.yesButton = wx.Button(self.warningPopup, -1, 'yes', style=wx.BU_EXACTFIT)
		self.warningPopup.noButton = wx.Button(self.warningPopup, -1, 'no', style=wx.BU_EXACTFIT)
		self.warningPopup.sizer = wx.BoxSizer(wx.HORIZONTAL)
		self.warningPopup.SetSizer(self.warningPopup.sizer)
		self.warningPopup.sizer.Add(self.warningPopup.text, 1, flag=wx.ALL|wx.ALIGN_CENTER_VERTICAL, border=1)
		self.warningPopup.sizer.Add(self.warningPopup.yesButton, 0, flag=wx.EXPAND|wx.ALL, border=1)
		self.warningPopup.sizer.Add(self.warningPopup.noButton, 0, flag=wx.EXPAND|wx.ALL, border=1)
		self.warningPopup.Fit()
		self.warningPopup.Layout()
		self.warningPopup.timer = wx.Timer(self)
		self.Bind(wx.EVT_TIMER, self.OnHideWarning, self.warningPopup.timer)
		
		self.Bind(wx.EVT_BUTTON, self.OnWarningPopup, self.warningPopup.yesButton)
		self.Bind(wx.EVT_BUTTON, self.OnHideWarning, self.warningPopup.noButton)
		parent.Bind(wx.EVT_MOVE, self.OnMove)
		parent.Bind(wx.EVT_SIZE, self.OnMove)
		
		self.toolbar = toolbarUtil.Toolbar(self)

		group = []
		toolbarUtil.RadioButton(self.toolbar, group, 'object-3d-on.png', 'object-3d-off.png', '3D view', callback=self.On3DClick)
		toolbarUtil.RadioButton(self.toolbar, group, 'object-top-on.png', 'object-top-off.png', 'Topdown view', callback=self.OnTopClick)
		self.toolbar.AddSeparator()

		self.showBorderButton = toolbarUtil.ToggleButton(self.toolbar, '', 'view-border-on.png', 'view-border-off.png', 'Show model borders', callback=self.OnViewChange)
		self.showSteepOverhang = toolbarUtil.ToggleButton(self.toolbar, '', 'steepOverhang-on.png', 'steepOverhang-off.png', 'Show steep overhang', callback=self.OnViewChange)
		self.toolbar.AddSeparator()

		group = []
		self.normalViewButton = toolbarUtil.RadioButton(self.toolbar, group, 'view-normal-on.png', 'view-normal-off.png', 'Normal model view', callback=self.OnViewChange)
		self.transparentViewButton = toolbarUtil.RadioButton(self.toolbar, group, 'view-transparent-on.png', 'view-transparent-off.png', 'Transparent model view', callback=self.OnViewChange)
		self.xrayViewButton = toolbarUtil.RadioButton(self.toolbar, group, 'view-xray-on.png', 'view-xray-off.png', 'X-Ray view', callback=self.OnViewChange)
		self.gcodeViewButton = toolbarUtil.RadioButton(self.toolbar, group, 'view-gcode-on.png', 'view-gcode-off.png', 'GCode view', callback=self.OnViewChange)
		self.mixedViewButton = toolbarUtil.RadioButton(self.toolbar, group, 'view-mixed-on.png', 'view-mixed-off.png', 'Mixed model/GCode view', callback=self.OnViewChange)
		self.toolbar.AddSeparator()

		self.layerSpin = wx.SpinCtrl(self.toolbar, -1, '', size=(21*4,21), style=wx.SP_ARROW_KEYS)
		self.toolbar.AddControl(self.layerSpin)
		self.Bind(wx.EVT_SPINCTRL, self.OnLayerNrChange, self.layerSpin)

		self.OnViewChange()
		
		sizer = wx.BoxSizer(wx.VERTICAL)
		sizer.Add(self.toolbar, 0, flag=wx.EXPAND|wx.TOP|wx.LEFT|wx.RIGHT, border=1)
		sizer.Add(self.glCanvas, 1, flag=wx.EXPAND)
		self.SetSizer(sizer)
		
		self.checkReloadFileTimer = wx.Timer(self)
		self.Bind(wx.EVT_TIMER, self.OnCheckReloadFile, self.checkReloadFileTimer)
		self.checkReloadFileTimer.Start(1000)

		self.infoToolButton   = openglGui.glButton(self.glCanvas, 0, 'Info', 0,0, self.OnInfoSelect)
		self.rotateToolButton = openglGui.glButton(self.glCanvas, 1, 'Rotate', 0,1, self.OnRotateSelect)
		self.scaleToolButton  = openglGui.glButton(self.glCanvas, 2, 'Scale', 0,2, self.OnScaleSelect)

		self.resetRotationButton = openglGui.glButton(self.glCanvas, 4, 'Reset rotation', 1,0, self.OnRotateReset)
		self.layFlatButton       = openglGui.glButton(self.glCanvas, 5, 'Lay flat', 2,0, self.OnLayFlat)

		self.resetScaleButton    = openglGui.glButton(self.glCanvas, 8, 'Scale reset', 1,0, self.OnScaleReset)
		self.scaleMaxButton      = openglGui.glButton(self.glCanvas, 9, 'Scale to machine size', 2,0, self.OnScaleMax)

		self.openFileButton      = openglGui.glButton(self.glCanvas, 3, 'Load file', -1,0, lambda : self.GetParent().GetParent().GetParent()._showModelLoadDialog(1))

		self.returnToModelViewAndUpdateModel()

		self.matrix = numpy.matrix(numpy.array(profile.getObjectMatrix(), numpy.float64).reshape((3,3,)))
		self.tool = previewTools.toolNone(self.glCanvas)
	def __init__(self, parent):
		super(SceneView, self).__init__(parent)

		self._yaw = 30
		self._pitch = 60
		self._zoom = 300
		self._scene = objectScene.Scene()
		self._gcode = None
		self._gcodeVBOs = []
		self._gcodeFilename = None
		self._gcodeLoadThread = None
		self._objectShader = None
		self._objectLoadShader = None
		self._focusObj = None
		self._selectedObj = None
		self._objColors = [None,None,None,None]
		self._mouseX = -1
		self._mouseY = -1
		self._mouseState = None
		self._viewTarget = numpy.array([0,0,0], numpy.float32)
		self._animView = None
		self._animZoom = None
		self._platformMesh = meshLoader.loadMeshes(resources.getPathForMesh('ultimaker_platform.stl'))[0]
		self._platformMesh._drawOffset = numpy.array([0,0,2.5], numpy.float32)
		self._isSimpleMode = True

		self._viewport = None
		self._modelMatrix = None
		self._projMatrix = None
		self.tempMatrix = None

		self.openFileButton      = openglGui.glButton(self, 4, 'Load', (0,0), self.showLoadModel)
		self.printButton         = openglGui.glButton(self, 6, 'Print', (1,0), self.OnPrintButton)
		self.printButton.setDisabled(True)

		group = []
		self.rotateToolButton = openglGui.glRadioButton(self, 8, 'Rotate', (0,-1), group, self.OnToolSelect)
		self.scaleToolButton  = openglGui.glRadioButton(self, 9, 'Scale', (1,-1), group, self.OnToolSelect)
		self.mirrorToolButton  = openglGui.glRadioButton(self, 10, 'Mirror', (2,-1), group, self.OnToolSelect)

		self.resetRotationButton = openglGui.glButton(self, 12, 'Reset', (0,-2), self.OnRotateReset)
		self.layFlatButton       = openglGui.glButton(self, 16, 'Lay flat', (0,-3), self.OnLayFlat)

		self.resetScaleButton    = openglGui.glButton(self, 13, 'Reset', (1,-2), self.OnScaleReset)
		self.scaleMaxButton      = openglGui.glButton(self, 17, 'To max', (1,-3), self.OnScaleMax)

		self.mirrorXButton       = openglGui.glButton(self, 14, 'Mirror X', (2,-2), lambda button: self.OnMirror(0))
		self.mirrorYButton       = openglGui.glButton(self, 18, 'Mirror Y', (2,-3), lambda button: self.OnMirror(1))
		self.mirrorZButton       = openglGui.glButton(self, 22, 'Mirror Z', (2,-4), lambda button: self.OnMirror(2))

		self.rotateToolButton.setExpandArrow(True)
		self.scaleToolButton.setExpandArrow(True)
		self.mirrorToolButton.setExpandArrow(True)

		self.scaleForm = openglGui.glFrame(self, (2, -2))
		openglGui.glGuiLayoutGrid(self.scaleForm)
		openglGui.glLabel(self.scaleForm, 'Scale X', (0,0))
		self.scaleXctrl = openglGui.glNumberCtrl(self.scaleForm, '1.0', (1,0), lambda value: self.OnScaleEntry(value, 0))
		openglGui.glLabel(self.scaleForm, 'Scale Y', (0,1))
		self.scaleYctrl = openglGui.glNumberCtrl(self.scaleForm, '1.0', (1,1), lambda value: self.OnScaleEntry(value, 1))
		openglGui.glLabel(self.scaleForm, 'Scale Z', (0,2))
		self.scaleZctrl = openglGui.glNumberCtrl(self.scaleForm, '1.0', (1,2), lambda value: self.OnScaleEntry(value, 2))
		openglGui.glLabel(self.scaleForm, 'Size X (mm)', (0,4))
		self.scaleXmmctrl = openglGui.glNumberCtrl(self.scaleForm, '0.0', (1,4), lambda value: self.OnScaleEntryMM(value, 0))
		openglGui.glLabel(self.scaleForm, 'Size Y (mm)', (0,5))
		self.scaleYmmctrl = openglGui.glNumberCtrl(self.scaleForm, '0.0', (1,5), lambda value: self.OnScaleEntryMM(value, 1))
		openglGui.glLabel(self.scaleForm, 'Size Z (mm)', (0,6))
		self.scaleZmmctrl = openglGui.glNumberCtrl(self.scaleForm, '0.0', (1,6), lambda value: self.OnScaleEntryMM(value, 2))
		openglGui.glLabel(self.scaleForm, 'Uniform scale', (0,8))
		self.scaleUniform = openglGui.glCheckbox(self.scaleForm, True, (1,8), None)

		self.viewSelection = openglGui.glComboButton(self, 'View mode', [7,19,11,15,23], ['Normal', 'Overhang', 'Transparent', 'X-Ray', 'Layers'], (-1,0), self.OnViewChange)
		self.layerSelect = openglGui.glSlider(self, 10000, 0, 1, (-1,-2), lambda : self.QueueRefresh())

		self.notification = openglGui.glNotification(self, (0, 0))

		self._slicer = sliceEngine.Slicer(self._updateSliceProgress)
		self._sceneUpdateTimer = wx.Timer(self)
		self.Bind(wx.EVT_TIMER, self._onRunSlicer, self._sceneUpdateTimer)
		self.Bind(wx.EVT_MOUSEWHEEL, self.OnMouseWheel)
		self.Bind(wx.EVT_LEAVE_WINDOW, self.OnMouseLeave)

		self.OnViewChange()
		self.OnToolSelect(0)
		self.updateToolButtons()
		self.updateProfileToControls()
Beispiel #6
0
	def __init__(self):
		super(projectPlanner, self).__init__(None, title='Cura - Project Planner')
		
		wx.EVT_CLOSE(self, self.OnClose)
		self.panel = wx.Panel(self, -1)
		self.SetSizer(wx.BoxSizer(wx.VERTICAL))
		self.GetSizer().Add(self.panel, 1, flag=wx.EXPAND)

		self.SetDropTarget(dropTarget.FileDropTarget(self.OnDropFiles, meshLoader.supportedExtensions()))
		
		self.list = []
		self.selection = None
		self.printMode = 0
		self.alwaysAutoPlace = profile.getPreference('planner_always_autoplace') == 'True'

		self.machineSize = numpy.array([profile.getPreferenceFloat('machine_width'), profile.getPreferenceFloat('machine_depth'), profile.getPreferenceFloat('machine_height')])
		self.headSizeMin = numpy.array([profile.getPreferenceFloat('extruder_head_size_min_x'), profile.getPreferenceFloat('extruder_head_size_min_y'),0])
		self.headSizeMax = numpy.array([profile.getPreferenceFloat('extruder_head_size_max_x'), profile.getPreferenceFloat('extruder_head_size_max_y'),0])

		self.extruderOffset = [
			numpy.array([0,0,0]),
			numpy.array([profile.getPreferenceFloat('extruder_offset_x1'), profile.getPreferenceFloat('extruder_offset_y1'), 0]),
			numpy.array([profile.getPreferenceFloat('extruder_offset_x2'), profile.getPreferenceFloat('extruder_offset_y2'), 0]),
			numpy.array([profile.getPreferenceFloat('extruder_offset_x3'), profile.getPreferenceFloat('extruder_offset_y3'), 0])]

		self.toolbar = toolbarUtil.Toolbar(self.panel)

		toolbarUtil.NormalButton(self.toolbar, self.OnLoadProject, 'open.png', 'Open project')
		toolbarUtil.NormalButton(self.toolbar, self.OnSaveProject, 'save.png', 'Save project')
		self.toolbar.AddSeparator()
		group = []
		toolbarUtil.RadioButton(self.toolbar, group, 'object-3d-on.png', 'object-3d-off.png', '3D view', callback=self.On3DClick).SetValue(self.alwaysAutoPlace)
		toolbarUtil.RadioButton(self.toolbar, group, 'object-top-on.png', 'object-top-off.png', 'Topdown view', callback=self.OnTopClick).SetValue(not self.alwaysAutoPlace)
		self.toolbar.AddSeparator()
		toolbarUtil.NormalButton(self.toolbar, self.OnPreferences, 'preferences.png', 'Project planner preferences')
		self.toolbar.AddSeparator()
		toolbarUtil.NormalButton(self.toolbar, self.OnCutMesh, 'cut-mesh.png', 'Cut a plate STL into multiple STL files, and add those files to the project.\nNote: Splitting up plates sometimes takes a few minutes.')
		toolbarUtil.NormalButton(self.toolbar, self.OnSaveCombinedSTL, 'save-combination.png', 'Save all the combined STL files into a single STL file as a plate.')
		self.toolbar.AddSeparator()
		group = []
		self.printOneAtATime = toolbarUtil.RadioButton(self.toolbar, group, 'view-normal-on.png', 'view-normal-off.png', 'Print one object at a time', callback=self.OnPrintTypeChange)
		self.printAllAtOnce = toolbarUtil.RadioButton(self.toolbar, group, 'all-at-once-on.png', 'all-at-once-off.png', 'Print all the objects at once', callback=self.OnPrintTypeChange)
		self.toolbar.AddSeparator()
		toolbarUtil.NormalButton(self.toolbar, self.OnQuit, 'exit.png', 'Close project planner')
		
		self.toolbar.Realize()

		self.toolbar2 = toolbarUtil.Toolbar(self.panel)

		toolbarUtil.NormalButton(self.toolbar2, self.OnAddModel, 'object-add.png', 'Add model')
		toolbarUtil.NormalButton(self.toolbar2, self.OnRemModel, 'object-remove.png', 'Remove model')
		self.toolbar2.AddSeparator()
		toolbarUtil.NormalButton(self.toolbar2, self.OnMoveUp, 'move-up.png', 'Move model up in print list')
		toolbarUtil.NormalButton(self.toolbar2, self.OnMoveDown, 'move-down.png', 'Move model down in print list')
		toolbarUtil.NormalButton(self.toolbar2, self.OnCopy, 'copy.png', 'Make a copy of the current selected object')
		toolbarUtil.NormalButton(self.toolbar2, self.OnSetCustomProfile, 'set-profile.png', 'Set a custom profile to be used to prepare a specific object.')
		self.toolbar2.AddSeparator()
		if not self.alwaysAutoPlace:
			toolbarUtil.NormalButton(self.toolbar2, self.OnAutoPlace, 'autoplace.png', 'Automaticly organize the objects on the platform.')
		toolbarUtil.NormalButton(self.toolbar2, self.OnSlice, 'slice.png', 'Prepare to project into a gcode file.')
		self.toolbar2.Realize()

		sizer = wx.GridBagSizer(2,2)
		self.panel.SetSizer(sizer)
		self.glCanvas = PreviewGLCanvas(self.panel, self)
		self.listbox = wx.ListBox(self.panel, -1, choices=[])
		self.addButton = wx.Button(self.panel, -1, "Add")
		self.remButton = wx.Button(self.panel, -1, "Remove")
		self.sliceButton = wx.Button(self.panel, -1, "Prepare")
		if not self.alwaysAutoPlace:
			self.autoPlaceButton = wx.Button(self.panel, -1, "Auto Place")
		
		sizer.Add(self.toolbar, (0,0), span=(1,1), flag=wx.EXPAND|wx.LEFT|wx.RIGHT)
		sizer.Add(self.toolbar2, (0,1), span=(1,2), flag=wx.EXPAND|wx.LEFT|wx.RIGHT)
		sizer.Add(self.glCanvas, (1,0), span=(5,1), flag=wx.EXPAND)
		sizer.Add(self.listbox, (1,1), span=(1,2), flag=wx.EXPAND)
		sizer.Add(self.addButton, (2,1), span=(1,1))
		sizer.Add(self.remButton, (2,2), span=(1,1))
		sizer.Add(self.sliceButton, (3,1), span=(1,1))
		if not self.alwaysAutoPlace:
			sizer.Add(self.autoPlaceButton, (3,2), span=(1,1))
		sizer.AddGrowableCol(0)
		sizer.AddGrowableRow(1)
		
		self.addButton.Bind(wx.EVT_BUTTON, self.OnAddModel)
		self.remButton.Bind(wx.EVT_BUTTON, self.OnRemModel)
		self.sliceButton.Bind(wx.EVT_BUTTON, self.OnSlice)
		if not self.alwaysAutoPlace:
			self.autoPlaceButton.Bind(wx.EVT_BUTTON, self.OnAutoPlace)
		self.listbox.Bind(wx.EVT_LISTBOX, self.OnListSelect)

		panel = wx.Panel(self.panel, -1)
		sizer.Add(panel, (5,1), span=(1,2))
		
		sizer = wx.GridBagSizer(2,2)
		panel.SetSizer(sizer)

		group = []
		self.rotateToolButton = openglGui.glRadioButton(self.glCanvas, 8, 'Rotate', (0,-1), group, self.OnToolSelect)
		self.scaleToolButton  = openglGui.glRadioButton(self.glCanvas, 9, 'Scale', (1,-1), group, self.OnToolSelect)
		self.mirrorToolButton  = openglGui.glRadioButton(self.glCanvas, 10, 'Mirror', (2,-1), group, self.OnToolSelect)

		self.resetRotationButton = openglGui.glButton(self.glCanvas, 12, 'Reset', (0,-2), self.OnRotateReset)
		self.layFlatButton       = openglGui.glButton(self.glCanvas, 16, 'Lay flat', (0,-3), self.OnLayFlat)

		self.resetScaleButton    = openglGui.glButton(self.glCanvas, 13, 'Reset', (1,-2), self.OnScaleReset)

		self.mirrorXButton       = openglGui.glButton(self.glCanvas, 14, 'Mirror X', (2,-2), lambda : self.OnMirror(0))
		self.mirrorYButton       = openglGui.glButton(self.glCanvas, 18, 'Mirror Y', (2,-3), lambda : self.OnMirror(1))
		self.mirrorZButton       = openglGui.glButton(self.glCanvas, 22, 'Mirror Z', (2,-4), lambda : self.OnMirror(2))

		self.scaleForm = openglGui.glFrame(self.glCanvas, (2, -2))
		openglGui.glGuiLayoutGrid(self.scaleForm)
		openglGui.glLabel(self.scaleForm, 'Scale X', (0,0))
		self.scaleXctrl = openglGui.glNumberCtrl(self.scaleForm, '1.0', (1,0), lambda value: self.OnScaleEntry(value, 0))
		openglGui.glLabel(self.scaleForm, 'Scale Y', (0,1))
		self.scaleYctrl = openglGui.glNumberCtrl(self.scaleForm, '1.0', (1,1), lambda value: self.OnScaleEntry(value, 1))
		openglGui.glLabel(self.scaleForm, 'Scale Z', (0,2))
		self.scaleZctrl = openglGui.glNumberCtrl(self.scaleForm, '1.0', (1,2), lambda value: self.OnScaleEntry(value, 2))
		openglGui.glLabel(self.scaleForm, 'Size X (mm)', (0,4))
		self.scaleXmmctrl = openglGui.glNumberCtrl(self.scaleForm, '0.0', (1,4), lambda value: self.OnScaleEntryMM(value, 0))
		openglGui.glLabel(self.scaleForm, 'Size Y (mm)', (0,5))
		self.scaleYmmctrl = openglGui.glNumberCtrl(self.scaleForm, '0.0', (1,5), lambda value: self.OnScaleEntryMM(value, 1))
		openglGui.glLabel(self.scaleForm, 'Size Z (mm)', (0,6))
		self.scaleZmmctrl = openglGui.glNumberCtrl(self.scaleForm, '0.0', (1,6), lambda value: self.OnScaleEntryMM(value, 2))
		openglGui.glLabel(self.scaleForm, 'Uniform scale', (0,8))
		self.scaleUniform = openglGui.glCheckbox(self.scaleForm, True, (1,8), None)

		self.SetSize((800,600))

		self.OnToolSelect()
Beispiel #7
0
    def __init__(self, parent):
        super(previewPanel, self).__init__(parent, -1)

        self.SetBackgroundColour(wx.SystemSettings.GetColour(wx.SYS_COLOUR_3DDKSHADOW))
        self.SetMinSize((440, 320))

        self.objectList = []
        self.errorList = []
        self.gcode = None
        self.objectsMinV = None
        self.objectsMaxV = None
        self.objectsBoundaryCircleSize = None
        self.loadThread = None
        self.machineSize = util3d.Vector3(
            profile.getPreferenceFloat("machine_width"),
            profile.getPreferenceFloat("machine_depth"),
            profile.getPreferenceFloat("machine_height"),
        )
        self.machineCenter = util3d.Vector3(self.machineSize.x / 2, self.machineSize.y / 2, 0)

        self.glCanvas = PreviewGLCanvas(self)
        # Create the popup window
        self.warningPopup = wx.PopupWindow(self, flags=wx.BORDER_SIMPLE)
        self.warningPopup.SetBackgroundColour(wx.SystemSettings.GetColour(wx.SYS_COLOUR_INFOBK))
        self.warningPopup.text = wx.StaticText(self.warningPopup, -1, "Reset scale, rotation and mirror?")
        self.warningPopup.yesButton = wx.Button(self.warningPopup, -1, "yes", style=wx.BU_EXACTFIT)
        self.warningPopup.noButton = wx.Button(self.warningPopup, -1, "no", style=wx.BU_EXACTFIT)
        self.warningPopup.sizer = wx.BoxSizer(wx.HORIZONTAL)
        self.warningPopup.SetSizer(self.warningPopup.sizer)
        self.warningPopup.sizer.Add(self.warningPopup.text, 1, flag=wx.ALL | wx.ALIGN_CENTER_VERTICAL, border=1)
        self.warningPopup.sizer.Add(self.warningPopup.yesButton, 0, flag=wx.EXPAND | wx.ALL, border=1)
        self.warningPopup.sizer.Add(self.warningPopup.noButton, 0, flag=wx.EXPAND | wx.ALL, border=1)
        self.warningPopup.Fit()
        self.warningPopup.Layout()
        self.warningPopup.timer = wx.Timer(self)
        self.Bind(wx.EVT_TIMER, self.OnHideWarning, self.warningPopup.timer)

        self.Bind(wx.EVT_BUTTON, self.OnWarningPopup, self.warningPopup.yesButton)
        self.Bind(wx.EVT_BUTTON, self.OnHideWarning, self.warningPopup.noButton)
        parent.Bind(wx.EVT_MOVE, self.OnMove)
        parent.Bind(wx.EVT_SIZE, self.OnMove)

        self.toolbar = toolbarUtil.Toolbar(self)

        group = []
        toolbarUtil.RadioButton(
            self.toolbar, group, "object-3d-on.png", "object-3d-off.png", "3D view", callback=self.On3DClick
        )
        toolbarUtil.RadioButton(
            self.toolbar, group, "object-top-on.png", "object-top-off.png", "Topdown view", callback=self.OnTopClick
        )
        self.toolbar.AddSeparator()

        self.showBorderButton = toolbarUtil.ToggleButton(
            self.toolbar,
            "",
            "view-border-on.png",
            "view-border-off.png",
            "Show model borders",
            callback=self.OnViewChange,
        )
        self.showSteepOverhang = toolbarUtil.ToggleButton(
            self.toolbar,
            "",
            "steepOverhang-on.png",
            "steepOverhang-off.png",
            "Show steep overhang",
            callback=self.OnViewChange,
        )
        self.toolbar.AddSeparator()

        group = []
        self.normalViewButton = toolbarUtil.RadioButton(
            self.toolbar,
            group,
            "view-normal-on.png",
            "view-normal-off.png",
            "Normal model view",
            callback=self.OnViewChange,
        )
        self.transparentViewButton = toolbarUtil.RadioButton(
            self.toolbar,
            group,
            "view-transparent-on.png",
            "view-transparent-off.png",
            "Transparent model view",
            callback=self.OnViewChange,
        )
        self.xrayViewButton = toolbarUtil.RadioButton(
            self.toolbar, group, "view-xray-on.png", "view-xray-off.png", "X-Ray view", callback=self.OnViewChange
        )
        self.gcodeViewButton = toolbarUtil.RadioButton(
            self.toolbar, group, "view-gcode-on.png", "view-gcode-off.png", "GCode view", callback=self.OnViewChange
        )
        self.mixedViewButton = toolbarUtil.RadioButton(
            self.toolbar,
            group,
            "view-mixed-on.png",
            "view-mixed-off.png",
            "Mixed model/GCode view",
            callback=self.OnViewChange,
        )
        self.toolbar.AddSeparator()

        self.layerSpin = wx.SpinCtrl(self.toolbar, -1, "", size=(21 * 4, 21), style=wx.SP_ARROW_KEYS)
        self.toolbar.AddControl(self.layerSpin)
        self.Bind(wx.EVT_SPINCTRL, self.OnLayerNrChange, self.layerSpin)

        sizer = wx.BoxSizer(wx.VERTICAL)
        sizer.Add(self.toolbar, 0, flag=wx.EXPAND | wx.TOP | wx.LEFT | wx.RIGHT, border=1)
        sizer.Add(self.glCanvas, 1, flag=wx.EXPAND)
        self.SetSizer(sizer)

        self.checkReloadFileTimer = wx.Timer(self)
        self.Bind(wx.EVT_TIMER, self.OnCheckReloadFile, self.checkReloadFileTimer)
        self.checkReloadFileTimer.Start(1000)

        group = []
        self.rotateToolButton = openglGui.glRadioButton(self.glCanvas, 1, "Rotate", (0, 1), group, self.OnToolSelect)
        self.scaleToolButton = openglGui.glRadioButton(self.glCanvas, 2, "Scale", (0, 2), group, self.OnToolSelect)
        self.mirrorToolButton = openglGui.glRadioButton(self.glCanvas, 12, "Mirror", (0, 3), group, self.OnToolSelect)

        self.resetRotationButton = openglGui.glButton(self.glCanvas, 4, "Reset rotation", (1, 1), self.OnRotateReset)
        self.layFlatButton = openglGui.glButton(self.glCanvas, 5, "Lay flat", (1, 2), self.OnLayFlat)

        self.resetScaleButton = openglGui.glButton(self.glCanvas, 8, "Scale reset", (1, 1), self.OnScaleReset)
        self.scaleMaxButton = openglGui.glButton(self.glCanvas, 9, "Scale to machine size", (1, 2), self.OnScaleMax)

        self.mirrorXButton = openglGui.glButton(self.glCanvas, 12, "Mirror X", (1, 1), lambda: self.OnMirror(0))
        self.mirrorYButton = openglGui.glButton(self.glCanvas, 13, "Mirror Y", (1, 2), lambda: self.OnMirror(1))
        self.mirrorZButton = openglGui.glButton(self.glCanvas, 14, "Mirror Z", (1, 3), lambda: self.OnMirror(2))

        self.openFileButton = openglGui.glButton(
            self.glCanvas,
            3,
            "Load model",
            (0, 0),
            lambda: self.GetParent().GetParent().GetParent()._showModelLoadDialog(1),
        )
        self.sliceButton = openglGui.glButton(
            self.glCanvas, 6, "Prepare model", (0, -2), lambda: self.GetParent().GetParent().GetParent().OnSlice(None)
        )
        self.printButton = openglGui.glButton(
            self.glCanvas, 7, "Print model", (0, -1), lambda: self.GetParent().GetParent().GetParent().OnPrint(None)
        )

        extruderCount = int(profile.getPreference("extruder_amount"))
        if extruderCount > 1:
            openglGui.glButton(
                self.glCanvas,
                3,
                "Load dual model",
                (1, 0),
                lambda: self.GetParent().GetParent().GetParent()._showModelLoadDialog(2),
            )
        if extruderCount > 2:
            openglGui.glButton(
                self.glCanvas,
                3,
                "Load triple model",
                (2, 0),
                lambda: self.GetParent().GetParent().GetParent()._showModelLoadDialog(3),
            )
        if extruderCount > 3:
            openglGui.glButton(
                self.glCanvas,
                3,
                "Load quad model",
                (3, 0),
                lambda: self.GetParent().GetParent().GetParent()._showModelLoadDialog(4),
            )

        self.scaleForm = openglGui.glFrame(self.glCanvas, (1, 3))
        openglGui.glGuiLayoutGrid(self.scaleForm)
        openglGui.glLabel(self.scaleForm, "Scale X", (0, 0))
        self.scaleXctrl = openglGui.glNumberCtrl(
            self.scaleForm, "1.0", (1, 0), lambda value: self.OnScaleEntry(value, 0)
        )
        openglGui.glLabel(self.scaleForm, "Scale Y", (0, 1))
        self.scaleYctrl = openglGui.glNumberCtrl(
            self.scaleForm, "1.0", (1, 1), lambda value: self.OnScaleEntry(value, 1)
        )
        openglGui.glLabel(self.scaleForm, "Scale Z", (0, 2))
        self.scaleZctrl = openglGui.glNumberCtrl(
            self.scaleForm, "1.0", (1, 2), lambda value: self.OnScaleEntry(value, 2)
        )
        openglGui.glLabel(self.scaleForm, "Size X (mm)", (0, 4))
        self.scaleXmmctrl = openglGui.glNumberCtrl(
            self.scaleForm, "0.0", (1, 4), lambda value: self.OnScaleEntryMM(value, 0)
        )
        openglGui.glLabel(self.scaleForm, "Size Y (mm)", (0, 5))
        self.scaleYmmctrl = openglGui.glNumberCtrl(
            self.scaleForm, "0.0", (1, 5), lambda value: self.OnScaleEntryMM(value, 1)
        )
        openglGui.glLabel(self.scaleForm, "Size Z (mm)", (0, 6))
        self.scaleZmmctrl = openglGui.glNumberCtrl(
            self.scaleForm, "0.0", (1, 6), lambda value: self.OnScaleEntryMM(value, 2)
        )
        openglGui.glLabel(self.scaleForm, "Uniform scale", (0, 8))
        self.scaleUniform = openglGui.glCheckbox(self.scaleForm, True, (1, 8), None)

        self.OnViewChange()
        self.OnToolSelect()
        self.returnToModelViewAndUpdateModel()

        self.matrix = numpy.matrix(numpy.array(profile.getObjectMatrix(), numpy.float64).reshape((3, 3)))
Beispiel #8
0
    def __init__(self, parent):
        super(previewPanel, self).__init__(parent, -1)

        self.SetBackgroundColour(
            wx.SystemSettings.GetColour(wx.SYS_COLOUR_3DDKSHADOW))
        self.SetMinSize((440, 320))

        self.objectList = []
        self.errorList = []
        self.gcode = None
        self.objectsMinV = None
        self.objectsMaxV = None
        self.objectsBoundaryCircleSize = None
        self.loadThread = None
        self.machineSize = util3d.Vector3(
            profile.getPreferenceFloat('machine_width'),
            profile.getPreferenceFloat('machine_depth'),
            profile.getPreferenceFloat('machine_height'))
        self.machineCenter = util3d.Vector3(self.machineSize.x / 2,
                                            self.machineSize.y / 2, 0)

        self.glCanvas = PreviewGLCanvas(self)
        #Create the popup window
        self.warningPopup = wx.PopupWindow(self, flags=wx.BORDER_SIMPLE)
        self.warningPopup.SetBackgroundColour(
            wx.SystemSettings.GetColour(wx.SYS_COLOUR_INFOBK))
        self.warningPopup.text = wx.StaticText(
            self.warningPopup, -1, 'Reset scale, rotation and mirror?')
        self.warningPopup.yesButton = wx.Button(self.warningPopup,
                                                -1,
                                                'yes',
                                                style=wx.BU_EXACTFIT)
        self.warningPopup.noButton = wx.Button(self.warningPopup,
                                               -1,
                                               'no',
                                               style=wx.BU_EXACTFIT)
        self.warningPopup.sizer = wx.BoxSizer(wx.HORIZONTAL)
        self.warningPopup.SetSizer(self.warningPopup.sizer)
        self.warningPopup.sizer.Add(self.warningPopup.text,
                                    1,
                                    flag=wx.ALL | wx.ALIGN_CENTER_VERTICAL,
                                    border=1)
        self.warningPopup.sizer.Add(self.warningPopup.yesButton,
                                    0,
                                    flag=wx.EXPAND | wx.ALL,
                                    border=1)
        self.warningPopup.sizer.Add(self.warningPopup.noButton,
                                    0,
                                    flag=wx.EXPAND | wx.ALL,
                                    border=1)
        self.warningPopup.Fit()
        self.warningPopup.Layout()
        self.warningPopup.timer = wx.Timer(self)
        self.Bind(wx.EVT_TIMER, self.OnHideWarning, self.warningPopup.timer)

        self.Bind(wx.EVT_BUTTON, self.OnWarningPopup,
                  self.warningPopup.yesButton)
        self.Bind(wx.EVT_BUTTON, self.OnHideWarning,
                  self.warningPopup.noButton)
        parent.Bind(wx.EVT_MOVE, self.OnMove)
        parent.Bind(wx.EVT_SIZE, self.OnMove)

        sizer = wx.BoxSizer(wx.VERTICAL)
        sizer.Add(self.glCanvas, 1, flag=wx.EXPAND)
        self.SetSizer(sizer)

        self.checkReloadFileTimer = wx.Timer(self)
        self.Bind(wx.EVT_TIMER, self.OnCheckReloadFile,
                  self.checkReloadFileTimer)
        self.checkReloadFileTimer.Start(1000)

        group = []
        self.rotateToolButton = openglGui.glRadioButton(
            self.glCanvas, 8, 'Rotate', (0, -1), group, self.OnToolSelect)
        self.scaleToolButton = openglGui.glRadioButton(self.glCanvas, 9,
                                                       'Scale', (1, -1), group,
                                                       self.OnToolSelect)
        self.mirrorToolButton = openglGui.glRadioButton(
            self.glCanvas, 10, 'Mirror', (2, -1), group, self.OnToolSelect)

        self.resetRotationButton = openglGui.glButton(self.glCanvas, 12,
                                                      'Reset', (0, -2),
                                                      self.OnRotateReset)
        self.layFlatButton = openglGui.glButton(self.glCanvas, 16, 'Lay flat',
                                                (0, -3), self.OnLayFlat)

        self.resetScaleButton = openglGui.glButton(self.glCanvas, 13, 'Reset',
                                                   (1, -2), self.OnScaleReset)
        self.scaleMaxButton = openglGui.glButton(self.glCanvas, 17, 'To max',
                                                 (1, -3), self.OnScaleMax)

        self.mirrorXButton = openglGui.glButton(self.glCanvas, 14, 'Mirror X',
                                                (2, -2),
                                                lambda: self.OnMirror(0))
        self.mirrorYButton = openglGui.glButton(self.glCanvas, 18, 'Mirror Y',
                                                (2, -3),
                                                lambda: self.OnMirror(1))
        self.mirrorZButton = openglGui.glButton(self.glCanvas, 22, 'Mirror Z',
                                                (2, -4),
                                                lambda: self.OnMirror(2))

        self.openFileButton = openglGui.glButton(
            self.glCanvas,
            4, 'Load', (0, 0), lambda: self.GetParent().GetParent().GetParent(
            )._showModelLoadDialog(1))
        self.sliceButton = openglGui.glButton(
            self.glCanvas, 5, 'Prepare', (1, 0),
            lambda: self.GetParent().GetParent().GetParent().OnSlice(None))
        self.printButton = openglGui.glButton(
            self.glCanvas, 6, 'Print', (2, 0),
            lambda: self.GetParent().GetParent().GetParent().OnPrint(None))

        self.rotateToolButton.setExpandArrow(True)
        self.scaleToolButton.setExpandArrow(True)
        self.mirrorToolButton.setExpandArrow(True)

        extruderCount = int(profile.getPreference('extruder_amount'))
        if extruderCount > 1:
            openglGui.glButton(
                self.glCanvas, 4, 'Load dual', (0, 1), lambda: self.GetParent(
                ).GetParent().GetParent()._showModelLoadDialog(2))
        if extruderCount > 2:
            openglGui.glButton(
                self.glCanvas, 4, 'Load triple', (0, 2), lambda: self.
                GetParent().GetParent().GetParent()._showModelLoadDialog(3))
        if extruderCount > 3:
            openglGui.glButton(
                self.glCanvas, 4, 'Load quad', (0, 3), lambda: self.GetParent(
                ).GetParent().GetParent()._showModelLoadDialog(4))

        self.scaleForm = openglGui.glFrame(self.glCanvas, (2, -2))
        openglGui.glGuiLayoutGrid(self.scaleForm)
        openglGui.glLabel(self.scaleForm, 'Scale X', (0, 0))
        self.scaleXctrl = openglGui.glNumberCtrl(
            self.scaleForm, '1.0', (1, 0),
            lambda value: self.OnScaleEntry(value, 0))
        openglGui.glLabel(self.scaleForm, 'Scale Y', (0, 1))
        self.scaleYctrl = openglGui.glNumberCtrl(
            self.scaleForm, '1.0', (1, 1),
            lambda value: self.OnScaleEntry(value, 1))
        openglGui.glLabel(self.scaleForm, 'Scale Z', (0, 2))
        self.scaleZctrl = openglGui.glNumberCtrl(
            self.scaleForm, '1.0', (1, 2),
            lambda value: self.OnScaleEntry(value, 2))
        openglGui.glLabel(self.scaleForm, 'Size X (mm)', (0, 4))
        self.scaleXmmctrl = openglGui.glNumberCtrl(
            self.scaleForm, '0.0', (1, 4),
            lambda value: self.OnScaleEntryMM(value, 0))
        openglGui.glLabel(self.scaleForm, 'Size Y (mm)', (0, 5))
        self.scaleYmmctrl = openglGui.glNumberCtrl(
            self.scaleForm, '0.0', (1, 5),
            lambda value: self.OnScaleEntryMM(value, 1))
        openglGui.glLabel(self.scaleForm, 'Size Z (mm)', (0, 6))
        self.scaleZmmctrl = openglGui.glNumberCtrl(
            self.scaleForm, '0.0', (1, 6),
            lambda value: self.OnScaleEntryMM(value, 2))
        openglGui.glLabel(self.scaleForm, 'Uniform scale', (0, 8))
        self.scaleUniform = openglGui.glCheckbox(self.scaleForm, True, (1, 8),
                                                 None)

        self.viewSelection = openglGui.glComboButton(
            self.glCanvas, 'View mode', [7, 11, 15, 19, 23],
            ['Normal', 'Transparent', 'X-Ray', 'Overhang', 'Layers'], (-1, 0),
            self.OnViewChange)
        self.layerSelect = openglGui.glSlider(self.glCanvas, 0, 0, 100,
                                              (-1, -2), lambda: self.Refresh())

        self.OnViewChange()
        self.OnToolSelect()
        self.updateModelTransform()

        self.matrix = numpy.matrix(
            numpy.array(profile.getObjectMatrix(), numpy.float64).reshape((
                3,
                3,
            )))
Beispiel #9
0
    def __init__(self):
        super(projectPlanner, self).__init__(None,
                                             title='Cura - Project Planner')

        wx.EVT_CLOSE(self, self.OnClose)
        self.panel = wx.Panel(self, -1)
        self.SetSizer(wx.BoxSizer(wx.VERTICAL))
        self.GetSizer().Add(self.panel, 1, flag=wx.EXPAND)

        self.SetDropTarget(
            dropTarget.FileDropTarget(self.OnDropFiles,
                                      meshLoader.supportedExtensions()))

        self.list = []
        self.selection = None
        self.printMode = 0
        self.alwaysAutoPlace = profile.getPreference(
            'planner_always_autoplace') == 'True'

        self.machineSize = numpy.array([
            profile.getPreferenceFloat('machine_width'),
            profile.getPreferenceFloat('machine_depth'),
            profile.getPreferenceFloat('machine_height')
        ])
        self.headSizeMin = numpy.array([
            profile.getPreferenceFloat('extruder_head_size_min_x'),
            profile.getPreferenceFloat('extruder_head_size_min_y'), 0
        ])
        self.headSizeMax = numpy.array([
            profile.getPreferenceFloat('extruder_head_size_max_x'),
            profile.getPreferenceFloat('extruder_head_size_max_y'), 0
        ])

        self.extruderOffset = [
            numpy.array([0, 0, 0]),
            numpy.array([
                profile.getPreferenceFloat('extruder_offset_x1'),
                profile.getPreferenceFloat('extruder_offset_y1'), 0
            ]),
            numpy.array([
                profile.getPreferenceFloat('extruder_offset_x2'),
                profile.getPreferenceFloat('extruder_offset_y2'), 0
            ]),
            numpy.array([
                profile.getPreferenceFloat('extruder_offset_x3'),
                profile.getPreferenceFloat('extruder_offset_y3'), 0
            ])
        ]

        self.toolbar = toolbarUtil.Toolbar(self.panel)

        toolbarUtil.NormalButton(self.toolbar, self.OnLoadProject, 'open.png',
                                 'Open project')
        toolbarUtil.NormalButton(self.toolbar, self.OnSaveProject, 'save.png',
                                 'Save project')
        self.toolbar.AddSeparator()
        group = []
        toolbarUtil.RadioButton(self.toolbar,
                                group,
                                'object-3d-on.png',
                                'object-3d-off.png',
                                '3D view',
                                callback=self.On3DClick).SetValue(
                                    self.alwaysAutoPlace)
        toolbarUtil.RadioButton(
            self.toolbar,
            group,
            'object-top-on.png',
            'object-top-off.png',
            'Topdown view',
            callback=self.OnTopClick).SetValue(not self.alwaysAutoPlace)
        self.toolbar.AddSeparator()
        toolbarUtil.NormalButton(self.toolbar, self.OnPreferences,
                                 'preferences.png',
                                 'Project planner preferences')
        self.toolbar.AddSeparator()
        toolbarUtil.NormalButton(
            self.toolbar, self.OnCutMesh, 'cut-mesh.png',
            'Cut a plate STL into multiple STL files, and add those files to the project.\nNote: Splitting up plates sometimes takes a few minutes.'
        )
        toolbarUtil.NormalButton(
            self.toolbar, self.OnSaveCombinedSTL, 'save-combination.png',
            'Save all the combined STL files into a single STL file as a plate.'
        )
        self.toolbar.AddSeparator()
        group = []
        self.printOneAtATime = toolbarUtil.RadioButton(
            self.toolbar,
            group,
            'view-normal-on.png',
            'view-normal-off.png',
            'Print one object at a time',
            callback=self.OnPrintTypeChange)
        self.printAllAtOnce = toolbarUtil.RadioButton(
            self.toolbar,
            group,
            'all-at-once-on.png',
            'all-at-once-off.png',
            'Print all the objects at once',
            callback=self.OnPrintTypeChange)
        self.toolbar.AddSeparator()
        toolbarUtil.NormalButton(self.toolbar, self.OnQuit, 'exit.png',
                                 'Close project planner')

        self.toolbar.Realize()

        self.toolbar2 = toolbarUtil.Toolbar(self.panel)

        toolbarUtil.NormalButton(self.toolbar2, self.OnAddModel,
                                 'object-add.png', 'Add model')
        toolbarUtil.NormalButton(self.toolbar2, self.OnRemModel,
                                 'object-remove.png', 'Remove model')
        self.toolbar2.AddSeparator()
        toolbarUtil.NormalButton(self.toolbar2, self.OnMoveUp, 'move-up.png',
                                 'Move model up in print list')
        toolbarUtil.NormalButton(self.toolbar2, self.OnMoveDown,
                                 'move-down.png',
                                 'Move model down in print list')
        toolbarUtil.NormalButton(self.toolbar2, self.OnCopy, 'copy.png',
                                 'Make a copy of the current selected object')
        toolbarUtil.NormalButton(
            self.toolbar2, self.OnSetCustomProfile, 'set-profile.png',
            'Set a custom profile to be used to prepare a specific object.')
        self.toolbar2.AddSeparator()
        if not self.alwaysAutoPlace:
            toolbarUtil.NormalButton(
                self.toolbar2, self.OnAutoPlace, 'autoplace.png',
                'Automaticly organize the objects on the platform.')
        toolbarUtil.NormalButton(self.toolbar2, self.OnSlice, 'slice.png',
                                 'Prepare to project into a gcode file.')
        self.toolbar2.Realize()

        sizer = wx.GridBagSizer(2, 2)
        self.panel.SetSizer(sizer)
        self.glCanvas = PreviewGLCanvas(self.panel, self)
        self.listbox = wx.ListBox(self.panel, -1, choices=[])
        self.addButton = wx.Button(self.panel, -1, "Add")
        self.remButton = wx.Button(self.panel, -1, "Remove")
        self.sliceButton = wx.Button(self.panel, -1, "Prepare")
        if not self.alwaysAutoPlace:
            self.autoPlaceButton = wx.Button(self.panel, -1, "Auto Place")

        sizer.Add(self.toolbar, (0, 0),
                  span=(1, 1),
                  flag=wx.EXPAND | wx.LEFT | wx.RIGHT)
        sizer.Add(self.toolbar2, (0, 1),
                  span=(1, 2),
                  flag=wx.EXPAND | wx.LEFT | wx.RIGHT)
        sizer.Add(self.glCanvas, (1, 0), span=(5, 1), flag=wx.EXPAND)
        sizer.Add(self.listbox, (1, 1), span=(1, 2), flag=wx.EXPAND)
        sizer.Add(self.addButton, (2, 1), span=(1, 1))
        sizer.Add(self.remButton, (2, 2), span=(1, 1))
        sizer.Add(self.sliceButton, (3, 1), span=(1, 1))
        if not self.alwaysAutoPlace:
            sizer.Add(self.autoPlaceButton, (3, 2), span=(1, 1))
        sizer.AddGrowableCol(0)
        sizer.AddGrowableRow(1)

        self.addButton.Bind(wx.EVT_BUTTON, self.OnAddModel)
        self.remButton.Bind(wx.EVT_BUTTON, self.OnRemModel)
        self.sliceButton.Bind(wx.EVT_BUTTON, self.OnSlice)
        if not self.alwaysAutoPlace:
            self.autoPlaceButton.Bind(wx.EVT_BUTTON, self.OnAutoPlace)
        self.listbox.Bind(wx.EVT_LISTBOX, self.OnListSelect)

        panel = wx.Panel(self.panel, -1)
        sizer.Add(panel, (5, 1), span=(1, 2))

        sizer = wx.GridBagSizer(2, 2)
        panel.SetSizer(sizer)

        self.rotateToolButton = openglGui.glButton(self.glCanvas, 1, 'Rotate',
                                                   (0, 1), self.OnRotateSelect)
        self.scaleToolButton = openglGui.glButton(self.glCanvas, 2, 'Scale',
                                                  (0, 2), self.OnScaleSelect)

        self.SetSize((800, 600))

        self.tool = previewTools.toolInfo(self.glCanvas)
Beispiel #10
0
    def __init__(self, parent):
        super(previewPanel, self).__init__(parent, -1)

        self.SetBackgroundColour(
            wx.SystemSettings.GetColour(wx.SYS_COLOUR_3DDKSHADOW))
        self.SetMinSize((440, 320))

        self.objectList = []
        self.errorList = []
        self.gcode = None
        self.objectsMinV = None
        self.objectsMaxV = None
        self.objectsBoundaryCircleSize = None
        self.loadThread = None
        self.machineSize = util3d.Vector3(
            profile.getPreferenceFloat('machine_width'),
            profile.getPreferenceFloat('machine_depth'),
            profile.getPreferenceFloat('machine_height'))
        self.machineCenter = util3d.Vector3(self.machineSize.x / 2,
                                            self.machineSize.y / 2, 0)

        self.glCanvas = PreviewGLCanvas(self)
        #Create the popup window
        self.warningPopup = wx.PopupWindow(self, flags=wx.BORDER_SIMPLE)
        self.warningPopup.SetBackgroundColour(
            wx.SystemSettings.GetColour(wx.SYS_COLOUR_INFOBK))
        self.warningPopup.text = wx.StaticText(
            self.warningPopup, -1, 'Reset scale, rotation and mirror?')
        self.warningPopup.yesButton = wx.Button(self.warningPopup,
                                                -1,
                                                'yes',
                                                style=wx.BU_EXACTFIT)
        self.warningPopup.noButton = wx.Button(self.warningPopup,
                                               -1,
                                               'no',
                                               style=wx.BU_EXACTFIT)
        self.warningPopup.sizer = wx.BoxSizer(wx.HORIZONTAL)
        self.warningPopup.SetSizer(self.warningPopup.sizer)
        self.warningPopup.sizer.Add(self.warningPopup.text,
                                    1,
                                    flag=wx.ALL | wx.ALIGN_CENTER_VERTICAL,
                                    border=1)
        self.warningPopup.sizer.Add(self.warningPopup.yesButton,
                                    0,
                                    flag=wx.EXPAND | wx.ALL,
                                    border=1)
        self.warningPopup.sizer.Add(self.warningPopup.noButton,
                                    0,
                                    flag=wx.EXPAND | wx.ALL,
                                    border=1)
        self.warningPopup.Fit()
        self.warningPopup.Layout()
        self.warningPopup.timer = wx.Timer(self)
        self.Bind(wx.EVT_TIMER, self.OnHideWarning, self.warningPopup.timer)

        self.Bind(wx.EVT_BUTTON, self.OnWarningPopup,
                  self.warningPopup.yesButton)
        self.Bind(wx.EVT_BUTTON, self.OnHideWarning,
                  self.warningPopup.noButton)
        parent.Bind(wx.EVT_MOVE, self.OnMove)
        parent.Bind(wx.EVT_SIZE, self.OnMove)

        self.toolbar = toolbarUtil.Toolbar(self)

        group = []
        toolbarUtil.RadioButton(self.toolbar,
                                group,
                                'object-3d-on.png',
                                'object-3d-off.png',
                                '3D view',
                                callback=self.On3DClick)
        toolbarUtil.RadioButton(self.toolbar,
                                group,
                                'object-top-on.png',
                                'object-top-off.png',
                                'Topdown view',
                                callback=self.OnTopClick)
        self.toolbar.AddSeparator()

        self.showBorderButton = toolbarUtil.ToggleButton(
            self.toolbar,
            '',
            'view-border-on.png',
            'view-border-off.png',
            'Show model borders',
            callback=self.OnViewChange)
        self.showSteepOverhang = toolbarUtil.ToggleButton(
            self.toolbar,
            '',
            'steepOverhang-on.png',
            'steepOverhang-off.png',
            'Show steep overhang',
            callback=self.OnViewChange)
        self.toolbar.AddSeparator()

        group = []
        self.normalViewButton = toolbarUtil.RadioButton(
            self.toolbar,
            group,
            'view-normal-on.png',
            'view-normal-off.png',
            'Normal model view',
            callback=self.OnViewChange)
        self.transparentViewButton = toolbarUtil.RadioButton(
            self.toolbar,
            group,
            'view-transparent-on.png',
            'view-transparent-off.png',
            'Transparent model view',
            callback=self.OnViewChange)
        self.xrayViewButton = toolbarUtil.RadioButton(
            self.toolbar,
            group,
            'view-xray-on.png',
            'view-xray-off.png',
            'X-Ray view',
            callback=self.OnViewChange)
        self.gcodeViewButton = toolbarUtil.RadioButton(
            self.toolbar,
            group,
            'view-gcode-on.png',
            'view-gcode-off.png',
            'GCode view',
            callback=self.OnViewChange)
        self.mixedViewButton = toolbarUtil.RadioButton(
            self.toolbar,
            group,
            'view-mixed-on.png',
            'view-mixed-off.png',
            'Mixed model/GCode view',
            callback=self.OnViewChange)
        self.toolbar.AddSeparator()

        self.layerSpin = wx.SpinCtrl(self.toolbar,
                                     -1,
                                     '',
                                     size=(21 * 4, 21),
                                     style=wx.SP_ARROW_KEYS)
        self.toolbar.AddControl(self.layerSpin)
        self.Bind(wx.EVT_SPINCTRL, self.OnLayerNrChange, self.layerSpin)

        sizer = wx.BoxSizer(wx.VERTICAL)
        sizer.Add(self.toolbar,
                  0,
                  flag=wx.EXPAND | wx.TOP | wx.LEFT | wx.RIGHT,
                  border=1)
        sizer.Add(self.glCanvas, 1, flag=wx.EXPAND)
        self.SetSizer(sizer)

        self.checkReloadFileTimer = wx.Timer(self)
        self.Bind(wx.EVT_TIMER, self.OnCheckReloadFile,
                  self.checkReloadFileTimer)
        self.checkReloadFileTimer.Start(1000)

        group = []
        self.rotateToolButton = openglGui.glRadioButton(
            self.glCanvas, 1, 'Rotate', (0, 1), group, self.OnToolSelect)
        self.scaleToolButton = openglGui.glRadioButton(self.glCanvas, 2,
                                                       'Scale', (0, 2), group,
                                                       self.OnToolSelect)
        self.mirrorToolButton = openglGui.glRadioButton(
            self.glCanvas, 12, 'Mirror', (0, 3), group, self.OnToolSelect)

        self.resetRotationButton = openglGui.glButton(self.glCanvas, 4,
                                                      'Reset rotation', (1, 1),
                                                      self.OnRotateReset)
        self.layFlatButton = openglGui.glButton(self.glCanvas, 5, 'Lay flat',
                                                (1, 2), self.OnLayFlat)

        self.resetScaleButton = openglGui.glButton(self.glCanvas, 8,
                                                   'Scale reset', (1, 1),
                                                   self.OnScaleReset)
        self.scaleMaxButton = openglGui.glButton(self.glCanvas, 9,
                                                 'Scale to machine size',
                                                 (1, 2), self.OnScaleMax)

        self.mirrorXButton = openglGui.glButton(self.glCanvas, 12, 'Mirror X',
                                                (1, 1),
                                                lambda: self.OnMirror(0))
        self.mirrorYButton = openglGui.glButton(self.glCanvas, 13, 'Mirror Y',
                                                (1, 2),
                                                lambda: self.OnMirror(1))
        self.mirrorZButton = openglGui.glButton(self.glCanvas, 14, 'Mirror Z',
                                                (1, 3),
                                                lambda: self.OnMirror(2))

        self.openFileButton = openglGui.glButton(
            self.glCanvas, 3, 'Load model', (0, 0), lambda: self.GetParent().
            GetParent().GetParent()._showModelLoadDialog(1))
        self.sliceButton = openglGui.glButton(
            self.glCanvas, 6, 'Prepare model', (0, -2),
            lambda: self.GetParent().GetParent().GetParent().OnSlice(None))
        self.printButton = openglGui.glButton(
            self.glCanvas, 7, 'Print model', (0, -1),
            lambda: self.GetParent().GetParent().GetParent().OnPrint(None))

        extruderCount = int(profile.getPreference('extruder_amount'))
        if extruderCount > 1:
            openglGui.glButton(
                self.glCanvas, 3,
                'Load dual model', (1, 0), lambda: self.GetParent().GetParent(
                ).GetParent()._showModelLoadDialog(2))
        if extruderCount > 2:
            openglGui.glButton(
                self.glCanvas, 3, 'Load triple model', (2, 0), lambda: self.
                GetParent().GetParent().GetParent()._showModelLoadDialog(3))
        if extruderCount > 3:
            openglGui.glButton(
                self.glCanvas, 3,
                'Load quad model', (3, 0), lambda: self.GetParent().GetParent(
                ).GetParent()._showModelLoadDialog(4))

        self.scaleForm = openglGui.glFrame(self.glCanvas, (1, 3))
        openglGui.glGuiLayoutGrid(self.scaleForm)
        openglGui.glLabel(self.scaleForm, 'Scale X', (0, 0))
        self.scaleXctrl = openglGui.glNumberCtrl(
            self.scaleForm, '1.0', (1, 0),
            lambda value: self.OnScaleEntry(value, 0))
        openglGui.glLabel(self.scaleForm, 'Scale Y', (0, 1))
        self.scaleYctrl = openglGui.glNumberCtrl(
            self.scaleForm, '1.0', (1, 1),
            lambda value: self.OnScaleEntry(value, 1))
        openglGui.glLabel(self.scaleForm, 'Scale Z', (0, 2))
        self.scaleZctrl = openglGui.glNumberCtrl(
            self.scaleForm, '1.0', (1, 2),
            lambda value: self.OnScaleEntry(value, 2))
        openglGui.glLabel(self.scaleForm, 'Size X (mm)', (0, 4))
        self.scaleXmmctrl = openglGui.glNumberCtrl(
            self.scaleForm, '0.0', (1, 4),
            lambda value: self.OnScaleEntryMM(value, 0))
        openglGui.glLabel(self.scaleForm, 'Size Y (mm)', (0, 5))
        self.scaleYmmctrl = openglGui.glNumberCtrl(
            self.scaleForm, '0.0', (1, 5),
            lambda value: self.OnScaleEntryMM(value, 1))
        openglGui.glLabel(self.scaleForm, 'Size Z (mm)', (0, 6))
        self.scaleZmmctrl = openglGui.glNumberCtrl(
            self.scaleForm, '0.0', (1, 6),
            lambda value: self.OnScaleEntryMM(value, 2))
        openglGui.glLabel(self.scaleForm, 'Uniform scale', (0, 8))
        self.scaleUniform = openglGui.glCheckbox(self.scaleForm, True, (1, 8),
                                                 None)

        self.OnViewChange()
        self.OnToolSelect()
        self.returnToModelViewAndUpdateModel()

        self.matrix = numpy.matrix(
            numpy.array(profile.getObjectMatrix(), numpy.float64).reshape((
                3,
                3,
            )))