def updateMachineMenu(self):
#Remove all items so we can rebuild the menu. Inserting items seems to cause crashes, so this is the safest way.
for item in self.machineMenu.GetMenuItems():
self.machineMenu.RemoveItem(item)
#Add a menu item for each machine configuration.
for n in xrange(0, profile.getMachineCount()):
i = self.machineMenu.Append(n + 0x1000, profile.getMachineName(n).title(), kind=wx.ITEM_RADIO)
if n == int(profile.getPreferenceFloat('active_machine')):
i.Check(True)
self.Bind(wx.EVT_MENU, lambda e: self.OnSelectMachine(e.GetId() - 0x1000), i)
self.machineMenu.AppendSeparator()
i = self.machineMenu.Append(-1, _("Add new machine..."))
self.Bind(wx.EVT_MENU, self.OnAddNewMachine, i)
i = self.machineMenu.Append(-1, _("Machine settings..."))
self.Bind(wx.EVT_MENU, self.OnMachineSettings, i)
#Add tools for machines.
self.machineMenu.AppendSeparator()
self.defaultFirmwareInstallMenuItem = self.machineMenu.Append(-1, _("Install default firmware..."))
self.Bind(wx.EVT_MENU, self.OnDefaultMarlinFirmware, self.defaultFirmwareInstallMenuItem)
i = self.machineMenu.Append(-1, _("Install custom firmware..."))
self.Bind(wx.EVT_MENU, self.OnCustomFirmware, i)
def updateMachineMenu(self):
#Remove all items so we can rebuild the menu. Inserting items seems to cause crashes, so this is the safest way.
for item in self.machineMenu.GetMenuItems():
self.machineMenu.RemoveItem(item)
#Add a menu item for each machine configuration.
for n in xrange(0, profile.getMachineCount()):
machine_name = profile.getMachineName(n)
machine_title = machine_name.title()
machine_title = machine_title.replace('Taz', 'TAZ')
machine_title = machine_title.replace('Lulzbot', 'LulzBot')
machine_title = machine_title.replace('Moarstruder', 'MOARstruder')
i = self.machineMenu.Append(n + 0x1000, machine_title, kind=wx.ITEM_RADIO)
if n == int(profile.getPreferenceFloat('active_machine')):
i.Check(True)
self.Bind(wx.EVT_MENU, lambda e: self.OnSelectMachine(e.GetId() - 0x1000), i)
self.machineMenu.AppendSeparator()
i = self.machineMenu.Append(-1, _("Add new machine..."))
self.Bind(wx.EVT_MENU, self.OnAddNewMachine, i)
i = self.machineMenu.Append(-1, _("Machine settings..."))
self.Bind(wx.EVT_MENU, self.OnMachineSettings, i)
#Add tools for machines.
self.machineMenu.AppendSeparator()
self.defaultFirmwareInstallMenuItem = self.machineMenu.Append(-1, _("Install default firmware..."))
self.Bind(wx.EVT_MENU, self.OnDefaultMarlinFirmware, self.defaultFirmwareInstallMenuItem)
i = self.machineMenu.Append(-1, _("Install custom firmware..."))
self.Bind(wx.EVT_MENU, self.OnCustomFirmware, i)
def __init__(self,
parent=None,
filename=None,
port=None,
machineIndex=None):
super(InstallFirmwareDialog,
self).__init__(parent=parent,
title=_("Firmware install for %s") %
(profile.getMachineName(machineIndex)),
size=(250, 100))
if port is None:
port = profile.getMachineSetting('serial_port')
if filename is None:
filename = getDefaultFirmware(machineIndex)
self._machineIndex = machineIndex
self._machine_type = profile.getMachineSetting('machine_type',
machineIndex)
if self._machine_type == 'reprap':
wx.MessageBox(
_("Cura only supports firmware updates for ATMega2560 based hardware.\nSo updating your RepRap with Cura might or might not work."
), _("Firmware update"), wx.OK | wx.ICON_INFORMATION)
sizer = wx.BoxSizer(wx.VERTICAL)
self.progressLabel = wx.StaticText(
self, -1,
'XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX\nX\nX')
sizer.Add(self.progressLabel,
0,
flag=wx.ALIGN_CENTER | wx.ALL,
border=5)
self.progressGauge = wx.Gauge(self, -1)
sizer.Add(self.progressGauge, 0, flag=wx.EXPAND)
self.buttonPanel = wx.Panel(self)
self.buttonPanel.SetSizer(wx.BoxSizer(wx.HORIZONTAL))
self.okButton = wx.Button(self.buttonPanel, -1, _("Start"))
self.okButton.Bind(wx.EVT_BUTTON, self.OnFlash)
self.buttonPanel.GetSizer().Add(self.okButton,
0,
flag=wx.ALIGN_CENTER | wx.ALL,
border=5)
self.cancelButton = wx.Button(self.buttonPanel, -1, _("Cancel"))
self.cancelButton.Bind(wx.EVT_BUTTON, self.OnCancel)
self.buttonPanel.GetSizer().Add(self.cancelButton,
0,
flag=wx.ALIGN_CENTER | wx.ALL,
border=5)
sizer.Add(self.buttonPanel, 0, flag=wx.ALIGN_CENTER | wx.ALL, border=5)
self.SetSizer(sizer)
self.filename = filename
self.port = port
self.Layout()
self.Fit()
self.thread = None
self.success = False
self.show_connect_dialog = False
def OnRenameMachine(self, e):
dialog = wx.TextEntryDialog(self, _("Enter the new name:"), _("Change machine name"),
profile.getMachineSetting('machine_name', self.nb.GetSelection()))
if dialog.ShowModal() != wx.ID_OK:
return
profile.putMachineSetting('machine_name', dialog.GetValue(), self.nb.GetSelection())
self.nb.SetPageText(self.nb.GetSelection(), profile.getMachineName(self.nb.GetSelection()))
self.parent.updateMachineMenu()
def OnRenameMachine(self, e):
dialog = wx.TextEntryDialog(
self, _("Enter the new name:"), _("Change machine name"),
profile.getMachineSetting('machine_name', self.nb.GetSelection()))
if dialog.ShowModal() != wx.ID_OK:
return
profile.putMachineSetting('machine_name', dialog.GetValue(),
self.nb.GetSelection())
self.nb.SetPageText(self.nb.GetSelection(),
profile.getMachineName(self.nb.GetSelection()))
self.parent.updateMachineMenu()
def __init__(self, parent = None, filename = None, port = None, machineIndex = None):
super(InstallFirmwareDialog, self).__init__(parent=parent, title=_("Firmware install for %s") % (profile.getMachineName(machineIndex)), size=(250, 100))
if port is None:
port = profile.getMachineSetting('serial_port')
if filename is None:
filename = getDefaultFirmware(machineIndex)
self._machineIndex = machineIndex
self._machine_type = profile.getMachineSetting('machine_type', machineIndex)
if self._machine_type == 'reprap':
wx.MessageBox(_("Cura only supports firmware updates for ATMega2560 based hardware.\nSo updating your RepRap with Cura might or might not work."), _("Firmware update"), wx.OK | wx.ICON_INFORMATION)
sizer = wx.BoxSizer(wx.VERTICAL)
self.progressLabel = wx.StaticText(self, -1, 'XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX\nX\nX')
sizer.Add(self.progressLabel, 0, flag=wx.ALIGN_CENTER|wx.ALL, border=5)
self.progressGauge = wx.Gauge(self, -1)
sizer.Add(self.progressGauge, 0, flag=wx.EXPAND)
self.buttonPanel = wx.Panel(self)
self.buttonPanel.SetSizer(wx.BoxSizer(wx.HORIZONTAL))
self.okButton = wx.Button(self.buttonPanel, -1, _("Start"))
self.okButton.Bind(wx.EVT_BUTTON, self.OnFlash)
self.buttonPanel.GetSizer().Add(self.okButton, 0, flag=wx.ALIGN_CENTER|wx.ALL, border=5)
self.cancelButton = wx.Button(self.buttonPanel, -1, _("Cancel"))
self.cancelButton.Bind(wx.EVT_BUTTON, self.OnCancel)
self.buttonPanel.GetSizer().Add(self.cancelButton, 0, flag=wx.ALIGN_CENTER|wx.ALL, border=5)
sizer.Add(self.buttonPanel, 0, flag=wx.ALIGN_CENTER|wx.ALL, border=5)
self.SetSizer(sizer)
self.filename = filename
self.port = port
self.Layout()
self.Fit()
self.thread = None
self.success = False
self.show_connect_dialog = False
def __init__(self, parent):
super(machineSettingsDialog, self).__init__(parent, title=_("Machine settings"))
wx.EVT_CLOSE(self, self.OnClose)
self.parent = parent
self.panel = configBase.configPanelBase(self)
self.SetSizer(wx.BoxSizer(wx.HORIZONTAL))
self.GetSizer().Add(self.panel, 1, wx.EXPAND)
self.nb = wx.Notebook(self.panel)
self.panel.SetSizer(wx.BoxSizer(wx.VERTICAL))
self.panel.GetSizer().Add(self.nb, 1, wx.EXPAND)
for idx in xrange(0, profile.getMachineCount()):
extruderCount = int(profile.getMachineSetting('extruder_amount', idx))
left, right, main = self.panel.CreateConfigPanel(self.nb)
configBase.TitleRow(left, _("Machine settings"))
configBase.SettingRow(left, 'steps_per_e', index=idx)
configBase.SettingRow(left, 'machine_width', index=idx)
configBase.SettingRow(left, 'machine_depth', index=idx)
configBase.SettingRow(left, 'machine_height', index=idx)
configBase.SettingRow(left, 'extruder_z_offset', index=idx)
configBase.SettingRow(left, 'extruder_amount', index=idx)
configBase.SettingRow(left, 'has_heated_bed', index=idx)
configBase.SettingRow(left, 'machine_center_is_zero', index=idx)
configBase.SettingRow(left, 'machine_shape', index=idx)
configBase.SettingRow(left, 'gcode_flavor', index=idx)
printer_type = profile.getMachineSetting('machine_type', idx)
if printer_type.startswith('lulzbot_'):
configBase.TitleRow(right, _("Tool Head"))
row = configBase.ToolHeadRow(right, 'toolhead', index=idx)
row.button.Bind(wx.EVT_BUTTON, self.OnChangeToolheadButton)
configBase.TitleRow(right, _("Printer head size"))
configBase.SettingRow(right, 'extruder_head_size_min_x', index=idx)
configBase.SettingRow(right, 'extruder_head_size_min_y', index=idx)
configBase.SettingRow(right, 'extruder_head_size_max_x', index=idx)
configBase.SettingRow(right, 'extruder_head_size_max_y', index=idx)
configBase.SettingRow(right, 'extruder_head_size_height', index=idx)
for i in xrange(1, extruderCount):
configBase.TitleRow(left, _("Extruder %d") % (i+1))
configBase.SettingRow(left, 'extruder_offset_x%d' % (i), index=idx)
configBase.SettingRow(left, 'extruder_offset_y%d' % (i), index=idx)
configBase.TitleRow(right, _("Communication settings"))
configBase.SettingRow(right, 'serial_port', ['AUTO'] + machineCom.serialList(), index=idx)
configBase.SettingRow(right, 'serial_baud', ['AUTO'] + map(str, machineCom.baudrateList()), index=idx)
self.nb.AddPage(main, profile.getMachineName(idx).title())
self.nb.SetSelection(int(profile.getPreferenceFloat('active_machine')))
self.buttonPanel = wx.Panel(self.panel)
self.panel.GetSizer().Add(self.buttonPanel)
self.buttonPanel.SetSizer(wx.BoxSizer(wx.HORIZONTAL))
self.okButton = wx.Button(self.buttonPanel, -1, _('Ok'))
self.okButton.Bind(wx.EVT_BUTTON, lambda e: self.Close())
self.buttonPanel.GetSizer().Add(self.okButton, flag=wx.ALL, border=5)
self.addButton = wx.Button(self.buttonPanel, -1, _('Add new machine'))
self.addButton.Bind(wx.EVT_BUTTON, self.OnAddMachine)
self.buttonPanel.GetSizer().Add(self.addButton, flag=wx.ALL, border=5)
self.remButton = wx.Button(self.buttonPanel, -1, _('Remove machine'))
self.remButton.Bind(wx.EVT_BUTTON, self.OnRemoveMachine)
self.buttonPanel.GetSizer().Add(self.remButton, flag=wx.ALL, border=5)
self.renButton = wx.Button(self.buttonPanel, -1, _('Change machine name'))
self.renButton.Bind(wx.EVT_BUTTON, self.OnRenameMachine)
self.buttonPanel.GetSizer().Add(self.renButton, flag=wx.ALL, border=5)
main.Fit()
self.Fit()
def __init__(self, parent):
super(machineSettingsDialog,
self).__init__(parent, title=_("Machine settings"))
wx.EVT_CLOSE(self, self.OnClose)
self.parent = parent
self.panel = configBase.configPanelBase(self)
self.SetSizer(wx.BoxSizer(wx.HORIZONTAL))
self.GetSizer().Add(self.panel, 1, wx.EXPAND)
self.nb = wx.Notebook(self.panel)
self.panel.SetSizer(wx.BoxSizer(wx.VERTICAL))
self.panel.GetSizer().Add(self.nb, 1, wx.EXPAND)
for idx in xrange(0, profile.getMachineCount()):
printer_type = profile.getMachineSetting('machine_type', idx)
extruderCount = int(
profile.getMachineSetting('extruder_amount', idx))
left, right, main = self.panel.CreateConfigPanel(self.nb)
configBase.TitleRow(left, _("Machine settings"))
configBase.SettingRow(left, 'steps_per_e', index=idx)
configBase.SettingRow(left, 'machine_width', index=idx)
configBase.SettingRow(left, 'machine_depth', index=idx)
configBase.SettingRow(left, 'machine_height', index=idx)
if not printer_type.startswith(
'lulzbot_TAZ_6'
): #Disabled for TAZ 6, use LCD controller instead
configBase.SettingRow(left, 'extruder_z_offset', index=idx)
configBase.SettingRow(left, 'extruder_amount', index=idx)
configBase.SettingRow(left, 'has_heated_bed', index=idx)
configBase.SettingRow(left, 'machine_center_is_zero', index=idx)
configBase.SettingRow(left, 'machine_shape', index=idx)
configBase.SettingRow(left, 'gcode_flavor', index=idx)
configBase.SettingRow(left,
'machine_startup_energy_PLA',
index=idx)
configBase.SettingRow(left, 'machine_run_energy_PLA', index=idx)
configBase.SettingRow(left,
'machine_startup_energy_ABS',
index=idx)
configBase.SettingRow(left, 'machine_run_energy_ABS', index=idx)
configBase.SettingRow(left,
'machine_startup_energy_HIPS',
index=idx)
configBase.SettingRow(left, 'machine_run_energy_HIPS', index=idx)
configBase.SettingRow(left,
'machine_startup_energy_PETT',
index=idx)
configBase.SettingRow(left, 'machine_run_energy_PETT', index=idx)
configBase.SettingRow(left,
'machine_startup_energy_Nylon',
index=idx)
configBase.SettingRow(left, 'machine_run_energy_Nylon', index=idx)
configBase.SettingRow(left,
'machine_startup_energy_Other',
index=idx)
configBase.SettingRow(left, 'machine_run_energy_Other', index=idx)
if printer_type.startswith('lulzbot_'):
configBase.TitleRow(right, _("Tool Head"))
row = configBase.ToolHeadRow(right, 'toolhead', index=idx)
row.button.Bind(wx.EVT_BUTTON, self.OnChangeToolheadButton)
configBase.TitleRow(right, _("Printer head size"))
configBase.SettingRow(right, 'extruder_head_size_min_x', index=idx)
configBase.SettingRow(right, 'extruder_head_size_min_y', index=idx)
configBase.SettingRow(right, 'extruder_head_size_max_x', index=idx)
configBase.SettingRow(right, 'extruder_head_size_max_y', index=idx)
configBase.SettingRow(right,
'extruder_head_size_height',
index=idx)
for i in xrange(1, extruderCount):
configBase.TitleRow(left, _("Extruder %d") % (i + 1))
configBase.SettingRow(left,
'extruder_offset_x%d' % (i),
index=idx)
configBase.SettingRow(left,
'extruder_offset_y%d' % (i),
index=idx)
configBase.TitleRow(right, _("Communication settings"))
serial_list = ['AUTO'] + machineCom.serialList()
serial_list_labels = serial_list[:]
if profile.getMachineSetting('serial_port') not in serial_list:
serial_list.append(profile.getMachineSetting('serial_port'))
serial_list_labels.append(
profile.getMachineSetting('serial_port') +
_(" (Currently unavailable)"))
configBase.SettingRow(right,
'serial_port',
serial_list,
serial_list_labels,
index=idx)
configBase.SettingRow(right,
'serial_baud', ['AUTO'] +
map(str, machineCom.baudrateList()),
index=idx)
machine_name = profile.getMachineName(idx)
machine_title = machine_name.title()
machine_title = machine_title.replace('Taz', 'TAZ')
machine_title = machine_title.replace('Lulzbot', 'LulzBot')
self.nb.AddPage(main, machine_title)
self.nb.SetSelection(int(profile.getPreferenceFloat('active_machine')))
self.buttonPanel = wx.Panel(self.panel)
self.panel.GetSizer().Add(self.buttonPanel)
self.buttonPanel.SetSizer(wx.BoxSizer(wx.HORIZONTAL))
self.okButton = wx.Button(self.buttonPanel, -1, _('Ok'))
self.okButton.Bind(wx.EVT_BUTTON, lambda e: self.Close())
self.buttonPanel.GetSizer().Add(self.okButton, flag=wx.ALL, border=5)
self.addButton = wx.Button(self.buttonPanel, -1, _('Add new machine'))
self.addButton.Bind(wx.EVT_BUTTON, self.OnAddMachine)
self.buttonPanel.GetSizer().Add(self.addButton, flag=wx.ALL, border=5)
self.remButton = wx.Button(self.buttonPanel, -1, _('Remove machine'))
self.remButton.Bind(wx.EVT_BUTTON, self.OnRemoveMachine)
self.buttonPanel.GetSizer().Add(self.remButton, flag=wx.ALL, border=5)
self.renButton = wx.Button(self.buttonPanel, -1,
_('Change machine name'))
self.renButton.Bind(wx.EVT_BUTTON, self.OnRenameMachine)
self.buttonPanel.GetSizer().Add(self.renButton, flag=wx.ALL, border=5)
main.Fit()
self.Fit()
def __init__(self, parent):
super(machineSettingsDialog,
self).__init__(parent, title=_("Machine settings"))
wx.EVT_CLOSE(self, self.OnClose)
self.parent = parent
self.panel = configBase.configPanelBase(self)
self.SetSizer(wx.BoxSizer(wx.HORIZONTAL))
self.GetSizer().Add(self.panel, 1, wx.EXPAND)
self.nb = wx.Notebook(self.panel)
self.panel.SetSizer(wx.BoxSizer(wx.VERTICAL))
self.panel.GetSizer().Add(self.nb, 1, wx.EXPAND)
for idx in xrange(0, profile.getMachineCount()):
extruderCount = int(
profile.getMachineSetting('extruder_amount', idx))
left, right, main = self.panel.CreateConfigPanel(self.nb)
configBase.TitleRow(left, _("Machine settings"))
configBase.SettingRow(left, 'steps_per_e', index=idx)
configBase.SettingRow(left, 'machine_width', index=idx)
configBase.SettingRow(left, 'machine_depth', index=idx)
configBase.SettingRow(left, 'machine_height', index=idx)
configBase.SettingRow(left, 'extruder_z_offset', index=idx)
configBase.SettingRow(left, 'extruder_amount', index=idx)
configBase.SettingRow(left, 'has_heated_bed', index=idx)
configBase.SettingRow(left, 'machine_center_is_zero', index=idx)
configBase.SettingRow(left, 'machine_shape', index=idx)
configBase.SettingRow(left, 'gcode_flavor', index=idx)
printer_type = profile.getMachineSetting('machine_type', idx)
if printer_type.startswith('lulzbot_'):
configBase.TitleRow(right, _("Tool Head"))
row = configBase.ToolHeadRow(right, 'toolhead', index=idx)
row.button.Bind(wx.EVT_BUTTON, self.OnChangeToolheadButton)
configBase.TitleRow(right, _("Printer head size"))
configBase.SettingRow(right, 'extruder_head_size_min_x', index=idx)
configBase.SettingRow(right, 'extruder_head_size_min_y', index=idx)
configBase.SettingRow(right, 'extruder_head_size_max_x', index=idx)
configBase.SettingRow(right, 'extruder_head_size_max_y', index=idx)
configBase.SettingRow(right,
'extruder_head_size_height',
index=idx)
for i in xrange(1, extruderCount):
configBase.TitleRow(left, _("Extruder %d") % (i + 1))
configBase.SettingRow(left,
'extruder_offset_x%d' % (i),
index=idx)
configBase.SettingRow(left,
'extruder_offset_y%d' % (i),
index=idx)
configBase.TitleRow(right, _("Communication settings"))
configBase.SettingRow(right,
'serial_port',
['AUTO'] + machineCom.serialList(),
index=idx)
configBase.SettingRow(right,
'serial_baud', ['AUTO'] +
map(str, machineCom.baudrateList()),
index=idx)
self.nb.AddPage(main, profile.getMachineName(idx).title())
self.nb.SetSelection(int(profile.getPreferenceFloat('active_machine')))
self.buttonPanel = wx.Panel(self.panel)
self.panel.GetSizer().Add(self.buttonPanel)
self.buttonPanel.SetSizer(wx.BoxSizer(wx.HORIZONTAL))
self.okButton = wx.Button(self.buttonPanel, -1, _('Ok'))
self.okButton.Bind(wx.EVT_BUTTON, lambda e: self.Close())
self.buttonPanel.GetSizer().Add(self.okButton, flag=wx.ALL, border=5)
self.addButton = wx.Button(self.buttonPanel, -1, _('Add new machine'))
self.addButton.Bind(wx.EVT_BUTTON, self.OnAddMachine)
self.buttonPanel.GetSizer().Add(self.addButton, flag=wx.ALL, border=5)
self.remButton = wx.Button(self.buttonPanel, -1, _('Remove machine'))
self.remButton.Bind(wx.EVT_BUTTON, self.OnRemoveMachine)
self.buttonPanel.GetSizer().Add(self.remButton, flag=wx.ALL, border=5)
self.renButton = wx.Button(self.buttonPanel, -1,
_('Change machine name'))
self.renButton.Bind(wx.EVT_BUTTON, self.OnRenameMachine)
self.buttonPanel.GetSizer().Add(self.renButton, flag=wx.ALL, border=5)
main.Fit()
self.Fit()
