def monitorTransfer( self, ftsReqDict ):
""" monitors transfer obtained from TransferDB """
ftsReqID = ftsReqDict['FTSReqID']
ftsGUID = ftsReqDict['FTSGuid']
ftsServer = ftsReqDict['FTSServer']
channelID = ftsReqDict['ChannelID']
sourceSE = ftsReqDict['SourceSE']
targetSE = ftsReqDict['TargetSE']
oFTSRequest = FTSRequest()
oFTSRequest.setFTSServer( ftsServer )
oFTSRequest.setFTSGUID( ftsGUID )
oFTSRequest.setSourceSE( sourceSE )
oFTSRequest.setTargetSE( targetSE )
#########################################################################
# Perform summary update of the FTS Request and update FTSReq entries.
self.log.info( 'Perform summary update of the FTS Request' )
infoStr = "Monitoring FTS Job:\n\n"
infoStr = "%sglite-transfer-status -s %s -l %s\n" % ( infoStr, ftsServer, ftsGUID )
infoStr = "%s%s%s\n" % ( infoStr, 'FTS GUID:'.ljust( 20 ), ftsGUID )
infoStr = "%s%s%s\n\n" % ( infoStr, 'FTS Server:'.ljust( 20 ), ftsServer )
self.log.info( infoStr )
res = oFTSRequest.summary()
self.transferDB.setFTSReqLastMonitor( ftsReqID )
if not res['OK']:
self.log.error( "Failed to update the FTS request summary", res['Message'] )
if "getTransferJobSummary2: Not authorised to query request" in res["Message"]:
self.log.error("FTS job is not existing at the FTS server anymore, will clean it up on TransferDB side")
## get fileIDs
fileIDs = self.transferDB.getFTSReqFileIDs( ftsReqID )
if not fileIDs["OK"]:
self.log.error("Unable to retrieve FileIDs associated to %s request" % ftsReqID )
return fileIDs
fileIDs = fileIDs["Value"]
## update FileToFTS table, this is just a clean up, no worry if somethings goes wrong
for fileID in fileIDs:
fileStatus = self.transferDB.setFileToFTSFileAttribute( ftsReqID, fileID,
"Status", "Failed" )
if not fileStatus["OK"]:
self.log.error("Unable to set FileToFTS status to Failed for FileID %s: %s" % ( fileID,
fileStatus["Message"] ) )
failReason = self.transferDB.setFileToFTSFileAttribute( ftsReqID, fileID,
"Reason", "FTS job expired on server" )
if not failReason["OK"]:
self.log.error("Unable to set FileToFTS reason for FileID %s: %s" % ( fileID,
failReason["Message"] ) )
## update Channel table
resetChannels = self.transferDB.resetFileChannelStatus( channelID, fileIDs )
if not resetChannels["OK"]:
self.log.error("Failed to reset Channel table for files to retry")
return resetChannels
## update FTSReq table
self.log.info( 'Setting FTS request status to Finished' )
ftsReqStatus = self.transferDB.setFTSReqStatus( ftsReqID, 'Finished' )
if not ftsReqStatus['OK']:
self.log.error( 'Failed update FTS Request status', ftsReqStatus['Message'] )
return ftsReqStatus
## if we land here, everything should be OK
return S_OK()
return res
res = oFTSRequest.dumpSummary()
if not res['OK']:
self.log.error( "Failed to get FTS request summary", res['Message'] )
return res
self.log.info( res['Value'] )
res = oFTSRequest.getPercentageComplete()
if not res['OK']:
self.log.error( "Failed to get FTS percentage complete", res['Message'] )
return res
self.log.info( 'FTS Request found to be %.1f percent complete' % res['Value'] )
self.transferDB.setFTSReqAttribute( ftsReqID, 'PercentageComplete', res['Value'] )
self.transferDB.addLoggingEvent( ftsReqID, res['Value'] )
#########################################################################
# Update the information in the TransferDB if the transfer is terminal.
res = oFTSRequest.isRequestTerminal()
if not res['OK']:
self.log.error( "Failed to determine whether FTS request terminal", res['Message'] )
return res
if not res['Value']:
return S_OK()
self.log.info( 'FTS Request found to be terminal, updating file states' )
#########################################################################
# Get the LFNS associated to the FTS request
self.log.info( 'Obtaining the LFNs associated to this request' )
res = self.transferDB.getFTSReqLFNs( ftsReqID, channelID, sourceSE )
if not res['OK']:
self.log.error( "Failed to obtain FTS request LFNs", res['Message'] )
return res
files = res['Value']
if not files:
self.log.error( 'No files present for transfer' )
return S_ERROR( 'No files were found in the DB' )
lfns = files.keys()
self.log.info( 'Obtained %s files' % len( lfns ) )
for lfn in lfns:
oFTSRequest.setLFN( lfn )
res = oFTSRequest.monitor()
if not res['OK']:
self.log.error( "Failed to perform detailed monitoring of FTS request", res['Message'] )
return res
res = oFTSRequest.getFailed()
if not res['OK']:
self.log.error( "Failed to obtained failed files for FTS request", res['Message'] )
return res
failedFiles = res['Value']
res = oFTSRequest.getDone()
if not res['OK']:
self.log.error( "Failed to obtained successful files for FTS request", res['Message'] )
return res
completedFiles = res['Value']
# An LFN can be included more than once if it was entered into more than one Request.
# FTS will only do the transfer once. We need to identify all FileIDs
res = self.transferDB.getFTSReqFileIDs( ftsReqID )
if not res['OK']:
self.log.error( 'Failed to get FileIDs associated to FTS Request', res['Message'] )
return res
fileIDs = res['Value']
res = self.transferDB.getAttributesForFilesList( fileIDs, ['LFN'] )
if not res['OK']:
self.log.error( 'Failed to get LFNs associated to FTS Request', res['Message'] )
return res
fileIDDict = res['Value']
fileToFTSUpdates = []
completedFileIDs = []
filesToRetry = []
filesToFail = []
for fileID, fileDict in fileIDDict.items():
lfn = fileDict['LFN']
if lfn in completedFiles:
completedFileIDs.append( fileID )
transferTime = 0
res = oFTSRequest.getTransferTime( lfn )
if res['OK']:
transferTime = res['Value']
fileToFTSUpdates.append( ( fileID, 'Completed', '', 0, transferTime ) )
if lfn in failedFiles:
failReason = ''
res = oFTSRequest.getFailReason( lfn )
if res['OK']:
failReason = res['Value']
if self.missingSource( failReason ):
self.log.error( 'The source SURL does not exist.', '%s %s' % ( lfn, oFTSRequest.getSourceSURL( lfn ) ) )
filesToFail.append( fileID )
else:
filesToRetry.append( fileID )
self.log.error( 'Failed to replicate file on channel.', "%s %s" % ( channelID, failReason ) )
fileToFTSUpdates.append( ( fileID, 'Failed', failReason, 0, 0 ) )
allUpdated = True
if filesToRetry:
self.log.info( 'Updating the Channel table for files to retry' )
res = self.transferDB.resetFileChannelStatus( channelID, filesToRetry )
if not res['OK']:
self.log.error( 'Failed to update the Channel table for file to retry.', res['Message'] )
allUpdated = False
for fileID in filesToFail:
self.log.info( 'Updating the Channel table for files to reschedule' )
res = self.transferDB.setFileChannelStatus( channelID, fileID, 'Failed' )
if not res['OK']:
self.log.error( 'Failed to update Channel table for failed files.', res['Message'] )
allUpdated = False
if completedFileIDs:
self.log.info( 'Updating the Channel table for successful files' )
res = self.transferDB.updateCompletedChannelStatus( channelID, completedFileIDs )
if not res['OK']:
self.log.error( 'Failed to update the Channel table for successful files.', res['Message'] )
allUpdated = False
self.log.info( 'Updating the Channel table for ancestors of successful files' )
res = self.transferDB.updateAncestorChannelStatus( channelID, completedFileIDs )
if not res['OK']:
self.log.error( 'Failed to update the Channel table for ancestors of successful files.', res['Message'] )
allUpdated = False
if fileToFTSUpdates:
self.log.info( 'Updating the FileToFTS table for files' )
res = self.transferDB.setFileToFTSFileAttributes( ftsReqID, channelID, fileToFTSUpdates )
if not res['OK']:
self.log.error( 'Failed to update the FileToFTS table for files.', res['Message'] )
allUpdated = False
if allUpdated:
res = oFTSRequest.finalize()
if not res['OK']:
self.log.error( "Failed to perform the finalization for the FTS request", res['Message'] )
return res
self.log.info( 'Adding logging event for FTS request' )
# Now set the FTSReq status to terminal so that it is not monitored again
res = self.transferDB.addLoggingEvent( ftsReqID, 'Finished' )
if not res['OK']:
self.log.error( 'Failed to add logging event for FTS Request', res['Message'] )
res = oFTSRequest.getFailedRegistrations()
failedRegistrations = res['Value']
regFailedFileIDs = []
regDoneFileIDs = []
regForgetFileIDs = []
for fileID, fileDict in fileIDDict.items():
lfn = fileDict['LFN']
if lfn in failedRegistrations:
self.log.info( 'Setting failed registration in FileToCat back to Waiting', lfn )
regFailedFileIDs.append( fileID )
# if the LFN appears more than once, FileToCat needs to be reset only once
del failedRegistrations[lfn]
elif lfn in completedFiles:
regDoneFileIDs.append( fileID )
elif fileID in filesToFail:
regForgetFileIDs.append( fileID )
if regFailedFileIDs:
res = self.transferDB.setRegistrationWaiting( channelID, regFailedFileIDs )
if not res['OK']:
self.log.error( 'Failed to reset entries in FileToCat', res['Message'] )
return res
if regDoneFileIDs:
res = self.transferDB.setRegistrationDone( channelID, regDoneFileIDs )
if not res['OK']:
self.log.error( 'Failed to set entries Done in FileToCat', res['Message'] )
return res
if regForgetFileIDs:
# This entries could also be set to Failed, but currently there is no method to do so.
res = self.transferDB.setRegistrationDone( channelID, regForgetFileIDs )
if not res['OK']:
self.log.error( 'Failed to set entries Done in FileToCat', res['Message'] )
return res
self.log.info( 'Updating FTS request status' )
res = self.transferDB.setFTSReqStatus( ftsReqID, 'Finished' )
if not res['OK']:
self.log.error( 'Failed update FTS Request status', res['Message'] )
return S_OK()
def monitorTransfer(self, ftsReqDict):
""" Monitors transfer obtained from TransferDB
"""
ftsReqID = ftsReqDict['FTSReqID']
ftsGUID = ftsReqDict['FTSGuid']
ftsServer = ftsReqDict['FTSServer']
channelID = ftsReqDict['ChannelID']
sourceSE = ftsReqDict['SourceSE']
targetSE = ftsReqDict['TargetSE']
oFTSRequest = FTSRequest()
oFTSRequest.setFTSServer(ftsServer)
oFTSRequest.setFTSGUID(ftsGUID)
oFTSRequest.setSourceSE(sourceSE)
oFTSRequest.setTargetSE(targetSE)
#########################################################################
# Perform summary update of the FTS Request and update FTSReq entries.
gLogger.info('Perform summary update of the FTS Request')
infoStr = "Monitoring FTS Job:\n\n"
infoStr = "%sglite-transfer-status -s %s -l %s\n" % (
infoStr, ftsServer, ftsGUID)
infoStr = "%s%s%s\n" % (infoStr, 'FTS GUID:'.ljust(20), ftsGUID)
infoStr = "%s%s%s\n\n" % (infoStr, 'FTS Server:'.ljust(20), ftsServer)
gLogger.info(infoStr)
res = oFTSRequest.summary()
self.TransferDB.setFTSReqLastMonitor(ftsReqID)
if not res['OK']:
gLogger.error("Failed to update the FTS request summary",
res['Message'])
return res
res = oFTSRequest.dumpSummary()
if not res['OK']:
gLogger.error("Failed to get FTS request summary", res['Message'])
return res
gLogger.info(res['Value'])
res = oFTSRequest.getPercentageComplete()
if not res['OK']:
gLogger.error("Failed to get FTS percentage complete",
res['Message'])
return res
gLogger.info('FTS Request found to be %.1f percent complete' %
res['Value'])
self.TransferDB.setFTSReqAttribute(ftsReqID, 'PercentageComplete',
res['Value'])
self.TransferDB.addLoggingEvent(ftsReqID, res['Value'])
#########################################################################
# Update the information in the TransferDB if the transfer is terminal.
res = oFTSRequest.isRequestTerminal()
if not res['OK']:
gLogger.error("Failed to determine whether FTS request terminal",
res['Message'])
return res
if not res['Value']:
return S_OK()
gLogger.info('FTS Request found to be terminal, updating file states')
#########################################################################
# Get the LFNS associated to the FTS request
gLogger.info('Obtaining the LFNs associated to this request')
res = self.TransferDB.getFTSReqLFNs(ftsReqID)
if not res['OK']:
gLogger.error("Failed to obtain FTS request LFNs", res['Message'])
return res
files = res['Value']
if not files:
gLogger.error('No files present for transfer')
return S_ERROR('No files were found in the DB')
lfns = files.keys()
gLogger.info('Obtained %s files' % len(lfns))
for lfn in lfns:
oFTSRequest.setLFN(lfn)
res = oFTSRequest.monitor()
if not res['OK']:
gLogger.error(
"Failed to perform detailed monitoring of FTS request",
res['Message'])
return res
res = oFTSRequest.getFailed()
if not res['OK']:
gLogger.error("Failed to obtained failed files for FTS request",
res['Message'])
return res
failedFiles = res['Value']
res = oFTSRequest.getDone()
if not res['OK']:
gLogger.error(
"Failed to obtained successful files for FTS request",
res['Message'])
return res
completedFiles = res['Value']
fileToFTSUpdates = []
completedFileIDs = []
for lfn in completedFiles:
fileID = files[lfn]
completedFileIDs.append(fileID)
transferTime = 0
res = oFTSRequest.getTransferTime(lfn)
if res['OK']:
transferTime = res['Value']
fileToFTSUpdates.append((fileID, 'Completed', '', 0, transferTime))
filesToRetry = []
filesToReschedule = []
for lfn in failedFiles:
fileID = files[lfn]
failReason = ''
res = oFTSRequest.getFailReason(lfn)
if res['OK']:
failReason = res['Value']
if self.missingSource(failReason):
gLogger.error('The source SURL does not exist.',
'%s %s' % (lfn, oFTSRequest.getSourceSURL(lfn)))
filesToReschedule.append(fileID)
else:
filesToRetry.append(fileID)
gLogger.error('Failed to replicate file on channel.',
"%s %s" % (channelID, failReason))
fileToFTSUpdates.append((fileID, 'Failed', failReason, 0, 0))
allUpdated = True
if filesToRetry:
gLogger.info('Updating the Channel table for files to retry')
res = self.TransferDB.resetFileChannelStatus(
channelID, filesToRetry)
if not res['OK']:
gLogger.error(
'Failed to update the Channel table for file to retry.',
res['Message'])
allUpdated = False
for fileID in filesToReschedule:
gLogger.info('Updating the Channel table for files to reschedule')
res = self.TransferDB.setFileChannelStatus(channelID, fileID,
'Failed')
if not res['OK']:
gLogger.error(
'Failed to update Channel table for failed files.',
res['Message'])
allUpdated = False
if completedFileIDs:
gLogger.info('Updating the Channel table for successful files')
res = self.TransferDB.updateCompletedChannelStatus(
channelID, completedFileIDs)
if not res['OK']:
gLogger.error(
'Failed to update the Channel table for successful files.',
res['Message'])
allUpdated = False
gLogger.info(
'Updating the Channel table for ancestors of successful files')
res = self.TransferDB.updateAncestorChannelStatus(
channelID, completedFileIDs)
if not res['OK']:
gLogger.error(
'Failed to update the Channel table for ancestors of successful files.',
res['Message'])
allUpdated = False
#
# cibak: temporary switch off of regitstration in FileToCat
#
#gLogger.info( 'Updating the FileToCat table for successful files' )
#res = self.TransferDB.setRegistrationWaiting( channelID, completedFileIDs )
#if not res['OK']:
# gLogger.error( 'Failed to update the FileToCat table for successful files.', res['Message'] )
# allUpdated = False
if fileToFTSUpdates:
gLogger.info('Updating the FileToFTS table for files')
res = self.TransferDB.setFileToFTSFileAttributes(
ftsReqID, channelID, fileToFTSUpdates)
if not res['OK']:
gLogger.error(
'Failed to update the FileToFTS table for files.',
res['Message'])
allUpdated = False
if allUpdated:
res = oFTSRequest.finalize()
if not res['OK']:
gLogger.error(
"Failed to perform the finalization for the FTS request",
res['Message'])
return res
gLogger.info('Adding logging event for FTS request')
# Now set the FTSReq status to terminal so that it is not monitored again
res = self.TransferDB.addLoggingEvent(ftsReqID, 'Finished')
if not res['OK']:
gLogger.error('Failed to add logging event for FTS Request',
res['Message'])
gLogger.info('Updating FTS request status')
res = self.TransferDB.setFTSReqStatus(ftsReqID, 'Finished')
if not res['OK']:
gLogger.error('Failed update FTS Request status',
res['Message'])
return S_OK()
def monitorTransfer(self, ftsReqDict):
""" monitors transfer obtained from TransferDB
:param dict ftsReqDict: FTS job dictionary
"""
ftsReqID = ftsReqDict.get("FTSReqID")
ftsGUID = ftsReqDict.get("FTSGuid")
ftsServer = ftsReqDict.get("FTSServer")
channelID = ftsReqDict.get("ChannelID")
sourceSE = ftsReqDict.get("SourceSE")
targetSE = ftsReqDict.get("TargetSE")
oFTSRequest = FTSRequest()
oFTSRequest.setFTSServer(ftsServer)
oFTSRequest.setFTSGUID(ftsGUID)
oFTSRequest.setSourceSE(sourceSE)
oFTSRequest.setTargetSE(targetSE)
log = gLogger.getSubLogger("@%s" % str(ftsReqID))
#########################################################################
# Perform summary update of the FTS Request and update FTSReq entries.
log.info("Perform summary update of the FTS Request")
infoStr = ["glite-transfer-status -s %s -l %s" % (ftsServer, ftsGUID)]
infoStr.append("FTS GUID: %s" % ftsGUID)
infoStr.append("FTS Server: %s" % ftsServer)
log.info("\n".join(infoStr))
res = oFTSRequest.summary()
self.transferDB.setFTSReqLastMonitor(ftsReqID)
if not res["OK"]:
log.error("Failed to update the FTS request summary",
res["Message"])
if "getTransferJobSummary2: Not authorised to query request" in res[
"Message"]:
log.error(
"FTS job is not existing at the FTS server anymore, will clean it up on TransferDB side"
)
cleanUp = self.ftsJobExpired(ftsReqID, channelID)
if not cleanUp["OK"]:
log.error(cleanUp["Message"])
return cleanUp
return res
res = oFTSRequest.dumpSummary()
if not res['OK']:
log.error("Failed to get FTS request summary", res["Message"])
return res
log.info(res['Value'])
res = oFTSRequest.getPercentageComplete()
if not res['OK']:
log.error("Failed to get FTS percentage complete", res["Message"])
return res
log.info('FTS Request found to be %.1f percent complete' %
res["Value"])
self.transferDB.setFTSReqAttribute(ftsReqID, "PercentageComplete",
res["Value"])
self.transferDB.addLoggingEvent(ftsReqID, res["Value"])
#########################################################################
# Update the information in the TransferDB if the transfer is terminal.
res = oFTSRequest.isRequestTerminal()
if not res["OK"]:
log.error("Failed to determine whether FTS request terminal",
res["Message"])
return res
if not res["Value"]:
return S_OK()
# # request is terminal
return self.terminalRequest(oFTSRequest, ftsReqID, channelID, sourceSE)
def monitorTransfer( self, ftsReqDict ):
""" Monitors transfer obtained from TransferDB
"""
ftsReqID = ftsReqDict['FTSReqID']
ftsGUID = ftsReqDict['FTSGuid']
ftsServer = ftsReqDict['FTSServer']
channelID = ftsReqDict['ChannelID']
sourceSE = ftsReqDict['SourceSE']
targetSE = ftsReqDict['TargetSE']
oFTSRequest = FTSRequest()
oFTSRequest.setFTSServer( ftsServer )
oFTSRequest.setFTSGUID( ftsGUID )
oFTSRequest.setSourceSE( sourceSE )
oFTSRequest.setTargetSE( targetSE )
#########################################################################
# Perform summary update of the FTS Request and update FTSReq entries.
gLogger.info( 'Perform summary update of the FTS Request' )
infoStr = "Monitoring FTS Job:\n\n"
infoStr = "%sglite-transfer-status -s %s -l %s\n" % ( infoStr, ftsServer, ftsGUID )
infoStr = "%s%s%s\n" % ( infoStr, 'FTS GUID:'.ljust( 20 ), ftsGUID )
infoStr = "%s%s%s\n\n" % ( infoStr, 'FTS Server:'.ljust( 20 ), ftsServer )
gLogger.info( infoStr )
res = oFTSRequest.summary()
self.TransferDB.setFTSReqLastMonitor( ftsReqID )
if not res['OK']:
gLogger.error( "Failed to update the FTS request summary", res['Message'] )
return res
res = oFTSRequest.dumpSummary()
if not res['OK']:
gLogger.error( "Failed to get FTS request summary", res['Message'] )
return res
gLogger.info( res['Value'] )
res = oFTSRequest.getPercentageComplete()
if not res['OK']:
gLogger.error( "Failed to get FTS percentage complete", res['Message'] )
return res
gLogger.info( 'FTS Request found to be %.1f percent complete' % res['Value'] )
self.TransferDB.setFTSReqAttribute( ftsReqID, 'PercentageComplete', res['Value'] )
self.TransferDB.addLoggingEvent( ftsReqID, res['Value'] )
#########################################################################
# Update the information in the TransferDB if the transfer is terminal.
res = oFTSRequest.isRequestTerminal()
if not res['OK']:
gLogger.error( "Failed to determine whether FTS request terminal", res['Message'] )
return res
if not res['Value']:
return S_OK()
gLogger.info( 'FTS Request found to be terminal, updating file states' )
#########################################################################
# Get the LFNS associated to the FTS request
gLogger.info( 'Obtaining the LFNs associated to this request' )
res = self.TransferDB.getFTSReqLFNs( ftsReqID )
if not res['OK']:
gLogger.error( "Failed to obtain FTS request LFNs", res['Message'] )
return res
files = res['Value']
if not files:
gLogger.error( 'No files present for transfer' )
return S_ERROR( 'No files were found in the DB' )
lfns = files.keys()
gLogger.info( 'Obtained %s files' % len( lfns ) )
for lfn in lfns:
oFTSRequest.setLFN( lfn )
res = oFTSRequest.monitor()
if not res['OK']:
gLogger.error( "Failed to perform detailed monitoring of FTS request", res['Message'] )
return res
res = oFTSRequest.getFailed()
if not res['OK']:
gLogger.error( "Failed to obtained failed files for FTS request", res['Message'] )
return res
failedFiles = res['Value']
res = oFTSRequest.getDone()
if not res['OK']:
gLogger.error( "Failed to obtained successful files for FTS request", res['Message'] )
return res
completedFiles = res['Value']
fileToFTSUpdates = []
completedFileIDs = []
for lfn in completedFiles:
fileID = files[lfn]
completedFileIDs.append( fileID )
transferTime = 0
res = oFTSRequest.getTransferTime( lfn )
if res['OK']:
transferTime = res['Value']
fileToFTSUpdates.append( ( fileID, 'Completed', '', 0, transferTime ) )
filesToRetry = []
filesToReschedule = []
for lfn in failedFiles:
fileID = files[lfn]
failReason = ''
res = oFTSRequest.getFailReason( lfn )
if res['OK']:
failReason = res['Value']
if self.missingSource( failReason ):
gLogger.error( 'The source SURL does not exist.', '%s %s' % ( lfn, oFTSRequest.getSourceSURL( lfn ) ) )
filesToReschedule.append( fileID )
else:
filesToRetry.append( fileID )
gLogger.error( 'Failed to replicate file on channel.', "%s %s" % ( channelID, failReason ) )
fileToFTSUpdates.append( ( fileID, 'Failed', failReason, 0, 0 ) )
allUpdated = True
if filesToRetry:
gLogger.info( 'Updating the Channel table for files to retry' )
res = self.TransferDB.resetFileChannelStatus( channelID, filesToRetry )
if not res['OK']:
gLogger.error( 'Failed to update the Channel table for file to retry.', res['Message'] )
allUpdated = False
for fileID in filesToReschedule:
gLogger.info( 'Updating the Channel table for files to reschedule' )
res = self.TransferDB.setFileChannelStatus( channelID, fileID, 'Failed' )
if not res['OK']:
gLogger.error( 'Failed to update Channel table for failed files.', res['Message'] )
allUpdated = False
if completedFileIDs:
gLogger.info( 'Updating the Channel table for successful files' )
res = self.TransferDB.updateCompletedChannelStatus( channelID, completedFileIDs )
if not res['OK']:
gLogger.error( 'Failed to update the Channel table for successful files.', res['Message'] )
allUpdated = False
gLogger.info( 'Updating the Channel table for ancestors of successful files' )
res = self.TransferDB.updateAncestorChannelStatus( channelID, completedFileIDs )
if not res['OK']:
gLogger.error( 'Failed to update the Channel table for ancestors of successful files.', res['Message'] )
allUpdated = False
#
# cibak: temporary switch off of regitstration in FileToCat
#
#gLogger.info( 'Updating the FileToCat table for successful files' )
#res = self.TransferDB.setRegistrationWaiting( channelID, completedFileIDs )
#if not res['OK']:
# gLogger.error( 'Failed to update the FileToCat table for successful files.', res['Message'] )
# allUpdated = False
if fileToFTSUpdates:
gLogger.info( 'Updating the FileToFTS table for files' )
res = self.TransferDB.setFileToFTSFileAttributes( ftsReqID, channelID, fileToFTSUpdates )
if not res['OK']:
gLogger.error( 'Failed to update the FileToFTS table for files.', res['Message'] )
allUpdated = False
if allUpdated:
res = oFTSRequest.finalize()
if not res['OK']:
gLogger.error( "Failed to perform the finalization for the FTS request", res['Message'] )
return res
gLogger.info( 'Adding logging event for FTS request' )
# Now set the FTSReq status to terminal so that it is not monitored again
res = self.TransferDB.addLoggingEvent( ftsReqID, 'Finished' )
if not res['OK']:
gLogger.error( 'Failed to add logging event for FTS Request', res['Message'] )
gLogger.info( 'Updating FTS request status' )
res = self.TransferDB.setFTSReqStatus( ftsReqID, 'Finished' )
if not res['OK']:
gLogger.error( 'Failed update FTS Request status', res['Message'] )
return S_OK()
def monitorTransfer( self, ftsReqDict ):
""" monitors transfer obtained from TransferDB
:param dict ftsReqDict: FTS job dictionary
"""
ftsReqID = ftsReqDict.get( "FTSReqID" )
ftsGUID = ftsReqDict.get( "FTSGuid" )
ftsServer = ftsReqDict.get( "FTSServer" )
channelID = ftsReqDict.get( "ChannelID" )
sourceSE = ftsReqDict.get( "SourceSE" )
targetSE = ftsReqDict.get( "TargetSE" )
oFTSRequest = FTSRequest()
oFTSRequest.setFTSServer( ftsServer )
oFTSRequest.setFTSGUID( ftsGUID )
oFTSRequest.setSourceSE( sourceSE )
oFTSRequest.setTargetSE( targetSE )
log = gLogger.getSubLogger( "@%s" % str( ftsReqID ) )
#########################################################################
# Perform summary update of the FTS Request and update FTSReq entries.
log.info( "Perform summary update of the FTS Request" )
infoStr = [ "glite-transfer-status -s %s -l %s" % ( ftsServer, ftsGUID ) ]
infoStr.append( "FTS GUID: %s" % ftsGUID )
infoStr.append( "FTS Server: %s" % ftsServer )
log.info( "\n".join( infoStr ) )
res = oFTSRequest.summary()
self.transferDB.setFTSReqLastMonitor( ftsReqID )
if not res["OK"]:
log.error( "Failed to update the FTS request summary", res["Message"] )
if "getTransferJobSummary2: Not authorised to query request" in res["Message"]:
log.error( "FTS job is not existing at the FTS server anymore, will clean it up on TransferDB side" )
cleanUp = self.ftsJobExpired( ftsReqID, channelID )
if not cleanUp["OK"]:
log.error( cleanUp["Message"] )
return cleanUp
return res
res = oFTSRequest.dumpSummary()
if not res['OK']:
log.error( "Failed to get FTS request summary", res["Message"] )
return res
log.info( res['Value'] )
res = oFTSRequest.getPercentageComplete()
if not res['OK']:
log.error( "Failed to get FTS percentage complete", res["Message"] )
return res
log.info( 'FTS Request found to be %.1f percent complete' % res["Value"] )
self.transferDB.setFTSReqAttribute( ftsReqID, "PercentageComplete", res["Value"] )
self.transferDB.addLoggingEvent( ftsReqID, res["Value"] )
#########################################################################
# Update the information in the TransferDB if the transfer is terminal.
res = oFTSRequest.isRequestTerminal()
if not res["OK"]:
log.error( "Failed to determine whether FTS request terminal", res["Message"] )
return res
if not res["Value"]:
return S_OK()
# # request is terminal
return self.terminalRequest( oFTSRequest, ftsReqID, channelID, sourceSE )