def __init__(self):
self.s = socket.socket()
self.s.bind((self.host, self.port))
self.ftpTestServer = FTPtest()
print "starting ftp server"
self.ftpTestServer.start()
print "server started"
def __init__(self):
self.s = socket.socket()
self.s.bind((self.host, self.port))
self.ftpTestServer = FTPtest()
print "starting ftp server"
self.ftpTestServer.start()
print "server started"
class ServerMain:
# listen on every ip address for incoming control messages
host = ""
# the control port for HoneyConnector control messages
port = 38742
s = socket.socket()
# ----- CRYPTOGRAPHIC STUFF -----
# Crypto stuff - this is for encrypting the connection between the client and the server modules
# This is probably a bad implementation and it should be changed in the future
BLOCK_SIZE = 32
PADDING = '}'
# IMPORTANT: Change this, before deploying in every module
keyHex = "f3be2f062adbdc63f4067431797b797df68c61a32e6a2d83d09ca17b18f44ece"
# Encrypt a message
def encrypt(self, message):
pad = lambda s: s + (self.BLOCK_SIZE - len(s) % self.BLOCK_SIZE) * self.PADDING
EncodeAES = lambda c, s: base64.b64encode(c.encrypt(pad(s)))
key = binascii.unhexlify(self.keyHex)
cipher = AES.new(key)
return EncodeAES(cipher, message)
# Decrypt a message
def decrypt(self, message):
DecodeAES = lambda c, e: c.decrypt(base64.b64decode(e)).rstrip(self.PADDING)
key = binascii.unhexlify(self.keyHex)
cipher = AES.new(key)
return DecodeAES(cipher, message)
# ... now back to normal business
# Start listening on the control port and start the FTP server without any users
def __init__(self):
self.s = socket.socket()
self.s.bind((self.host, self.port))
self.ftpTestServer = FTPtest()
print "starting ftp server"
self.ftpTestServer.start()
print "server started"
# Checks if the command is a valid command to create a new FTP user
def isValidFTPUserCommand(self, inputCMD):
return inputCMD.count(" ") == 3 and inputCMD.split(" ")[1] == "FTP"
# Checks if the command is a valid command to delete the FTP users
def isValidFTPResetCommand(self, inputCMD):
return inputCMD.count(" ") == 4 and inputCMD.split(" ")[1] == "FTP" and inputCMD.split(" ")[2] == "stop"
# Checks if the command is a valid command to create a new IMAP user
def isValidIMAPUserCommand(self, inputCMD):
return inputCMD.count(" ") == 3 and inputCMD.split(" ")[1] == "IMAP"
# Checks if the command is a valid command to delete an IMAP user
def isValidIMAPResetCommand(self, inputCMD):
return inputCMD.count(" ") == 4 and inputCMD.split(" ")[1] == "IMAP" and inputCMD.split(" ")[2] == "stop"
# Listens for any incomming connection on the control port, decrypts it and returns the message
def listenForCommand(self):
self.s.listen(5)
c, addr = self.s.accept()
print 'Got connection from', addr
encMessage = c.recv(4096)
recvMessage = self.decrypt(encMessage)
# s.shutdown(socket.SHUT_RDWR)
c.close()
return recvMessage
# Removes a user from the FTP server
def removeFTPUser(self, username):
self.ftpTestServer.delUser(username)
# Adds a user to the FTP server
def addFTPUsername(self, username, password):
self.ftpTestServer.addUser(username, password)
self.ftpTestServer.populateFiles()
print "Populated stuff"
# Removes a user from the IMAP server
def resetIMAP(self, username, password):
imapAdmin = IMAPtest()
imapAdmin.deleteUser(username)
print "IMAP user", username, "deleted"
# Adds a user to the IMAP server
def addIMAPUsername(self, username, password):
print "IMAP trying to add user with " + username + " " + password
imapAdmin = IMAPtest()
imapAdmin.createUser(username, password)
imapAdmin.populateMailbox(username)
print "IMAP mailbox populated"
# And now the main function: Loop through listening for commands, match them if they are understood and do stuff if it fits
def mainLoop(self):
try:
while True:
try:
command = self.listenForCommand()
print command
if self.isValidFTPUserCommand(command):
username = command.split(" ")[2]
password = command.split(" ")[3]
self.addFTPUsername(username, password)
if self.isValidFTPResetCommand(command):
username = command.split(" ")[3]
password = command.split(" ")[4]
self.removeFTPUser(username)
if self.isValidIMAPUserCommand(command):
username = command.split(" ")[2]
password = command.split(" ")[3]
self.addIMAPUsername(username, password)
if self.isValidIMAPResetCommand(command):
username = command.split(" ")[3]
password = command.split(" ")[4]
self.resetIMAP(username, password)
except Exception, e:
print e.message, "\n", traceback.format_exc()
except KeyboardInterrupt:
raise
class ServerMain:
# listen on every ip address for incoming control messages
host = ""
# the control port for HoneyConnector control messages
port = 38742
s = socket.socket()
# ----- CRYPTOGRAPHIC STUFF -----
# Crypto stuff - this is for encrypting the connection between the client and the server modules
# This is probably a bad implementation and it should be changed in the future
BLOCK_SIZE = 32
PADDING = "}"
# IMPORTANT: Change this, before deploying in every module
keyHex = "f3be2f062adbdc63f4067431797b797df68c61a32e6a2d83d09ca17b18f44ece"
# Encrypt a message
def encrypt(self, message):
pad = lambda s: s + (self.BLOCK_SIZE - len(s) % self.BLOCK_SIZE) * self.PADDING
EncodeAES = lambda c, s: base64.b64encode(c.encrypt(pad(s)))
key = binascii.unhexlify(self.keyHex)
cipher = AES.new(key)
return EncodeAES(cipher, message)
# Decrypt a message
def decrypt(self, message):
DecodeAES = lambda c, e: c.decrypt(base64.b64decode(e)).rstrip(self.PADDING)
key = binascii.unhexlify(self.keyHex)
cipher = AES.new(key)
return DecodeAES(cipher, message)
# ... now back to normal business
# Start listening on the control port and start the FTP server without any users
def __init__(self):
self.s = socket.socket()
self.s.bind((self.host, self.port))
self.ftpTestServer = FTPtest()
print "starting ftp server"
self.ftpTestServer.start()
print "server started"
# Checks if the command is a valid command to create a new FTP user
def isValidFTPUserCommand(self, inputCMD):
return inputCMD.count(" ") == 3 and inputCMD.split(" ")[1] == "FTP"
# Checks if the command is a valid command to delete the FTP users
def isValidFTPResetCommand(self, inputCMD):
return inputCMD.count(" ") == 4 and inputCMD.split(" ")[1] == "FTP" and inputCMD.split(" ")[2] == "stop"
# Checks if the command is a valid command to create a new IMAP user
def isValidIMAPUserCommand(self, inputCMD):
return inputCMD.count(" ") == 3 and inputCMD.split(" ")[1] == "IMAP"
# Checks if the command is a valid command to delete an IMAP user
def isValidIMAPResetCommand(self, inputCMD):
return inputCMD.count(" ") == 4 and inputCMD.split(" ")[1] == "IMAP" and inputCMD.split(" ")[2] == "stop"
# Listens for any incomming connection on the control port, decrypts it and returns the message
def listenForCommand(self):
self.s.listen(5)
c, addr = self.s.accept()
print "Got connection from", addr
encMessage = c.recv(4096)
recvMessage = self.decrypt(encMessage)
# s.shutdown(socket.SHUT_RDWR)
c.close()
return recvMessage
# Removes a user from the FTP server
def removeFTPUser(self, username):
self.ftpTestServer.delUser(username)
# Adds a user to the FTP server
def addFTPUsername(self, username, password):
self.ftpTestServer.addUser(username, password)
self.ftpTestServer.populateFiles()
print "Populated stuff"
# Removes a user from the IMAP server
def resetIMAP(self, username, password):
imapAdmin = IMAPtest()
imapAdmin.deleteUser(username)
print "IMAP user", username, "deleted"
# Adds a user to the IMAP server
def addIMAPUsername(self, username, password):
print "IMAP trying to add user with " + username + " " + password
imapAdmin = IMAPtest()
imapAdmin.createUser(username, password)
imapAdmin.populateMailbox(username)
print "IMAP mailbox populated"
# And now the main function: Loop through listening for commands, match them if they are understood and do stuff if it fits
def mainLoop(self):
try:
while True:
try:
command = self.listenForCommand()
print command
if self.isValidFTPUserCommand(command):
username = command.split(" ")[2]
password = command.split(" ")[3]
self.addFTPUsername(username, password)
if self.isValidFTPResetCommand(command):
username = command.split(" ")[3]
password = command.split(" ")[4]
self.removeFTPUser(username)
if self.isValidIMAPUserCommand(command):
username = command.split(" ")[2]
password = command.split(" ")[3]
self.addIMAPUsername(username, password)
if self.isValidIMAPResetCommand(command):
username = command.split(" ")[3]
password = command.split(" ")[4]
self.resetIMAP(username, password)
except Exception, e:
print e.message, "\n", traceback.format_exc()
except KeyboardInterrupt:
raise